1 /* 2 * Nordic Semiconductor nRF51 SoC 3 * http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf 4 * 5 * Copyright 2018 Joel Stanley <joel@jms.id.au> 6 * 7 * This code is licensed under the GPL version 2 or later. See 8 * the COPYING file in the top-level directory. 9 */ 10 11 #include "qemu/osdep.h" 12 #include "qapi/error.h" 13 #include "hw/arm/boot.h" 14 #include "hw/sysbus.h" 15 #include "hw/qdev-clock.h" 16 #include "hw/misc/unimp.h" 17 #include "qemu/log.h" 18 19 #include "hw/arm/nrf51.h" 20 #include "hw/arm/nrf51_soc.h" 21 22 /* 23 * The size and base is for the NRF51822 part. If other parts 24 * are supported in the future, add a sub-class of NRF51SoC for 25 * the specific variants 26 */ 27 #define NRF51822_FLASH_PAGES 256 28 #define NRF51822_SRAM_PAGES 16 29 #define NRF51822_FLASH_SIZE (NRF51822_FLASH_PAGES * NRF51_PAGE_SIZE) 30 #define NRF51822_SRAM_SIZE (NRF51822_SRAM_PAGES * NRF51_PAGE_SIZE) 31 32 #define BASE_TO_IRQ(base) ((base >> 12) & 0x1F) 33 34 /* HCLK (the main CPU clock) on this SoC is always 16MHz */ 35 #define HCLK_FRQ 16000000 36 37 static uint64_t clock_read(void *opaque, hwaddr addr, unsigned int size) 38 { 39 qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " [%u]\n", 40 __func__, addr, size); 41 return 1; 42 } 43 44 static void clock_write(void *opaque, hwaddr addr, uint64_t data, 45 unsigned int size) 46 { 47 qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " <- 0x%" PRIx64 " [%u]\n", 48 __func__, addr, data, size); 49 } 50 51 static const MemoryRegionOps clock_ops = { 52 .read = clock_read, 53 .write = clock_write 54 }; 55 56 57 static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) 58 { 59 NRF51State *s = NRF51_SOC(dev_soc); 60 MemoryRegion *mr; 61 Error *err = NULL; 62 uint8_t i = 0; 63 hwaddr base_addr = 0; 64 65 if (!s->board_memory) { 66 error_setg(errp, "memory property was not set"); 67 return; 68 } 69 70 /* 71 * HCLK on this SoC is fixed, so we set up sysclk ourselves and 72 * the board shouldn't connect it. 73 */ 74 if (clock_has_source(s->sysclk)) { 75 error_setg(errp, "sysclk clock must not be wired up by the board code"); 76 return; 77 } 78 /* This clock doesn't need migration because it is fixed-frequency */ 79 clock_set_hz(s->sysclk, HCLK_FRQ); 80 qdev_connect_clock_in(DEVICE(&s->cpu), "cpuclk", s->sysclk); 81 /* 82 * This SoC has no systick device, so don't connect refclk. 83 * TODO: model the lack of systick (currently the armv7m object 84 * will always provide one). 85 */ 86 87 object_property_set_link(OBJECT(&s->cpu), "memory", OBJECT(&s->container), 88 &error_abort); 89 if (!sysbus_realize(SYS_BUS_DEVICE(&s->cpu), errp)) { 90 return; 91 } 92 93 memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); 94 95 memory_region_init_ram(&s->sram, OBJECT(s), "nrf51.sram", s->sram_size, 96 &err); 97 if (err) { 98 error_propagate(errp, err); 99 return; 100 } 101 memory_region_add_subregion(&s->container, NRF51_SRAM_BASE, &s->sram); 102 103 /* UART */ 104 if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart), errp)) { 105 return; 106 } 107 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->uart), 0); 108 memory_region_add_subregion_overlap(&s->container, NRF51_UART_BASE, mr, 0); 109 sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart), 0, 110 qdev_get_gpio_in(DEVICE(&s->cpu), 111 BASE_TO_IRQ(NRF51_UART_BASE))); 112 113 /* RNG */ 114 if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng), errp)) { 115 return; 116 } 117 118 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0); 119 memory_region_add_subregion_overlap(&s->container, NRF51_RNG_BASE, mr, 0); 120 sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng), 0, 121 qdev_get_gpio_in(DEVICE(&s->cpu), 122 BASE_TO_IRQ(NRF51_RNG_BASE))); 123 124 /* UICR, FICR, NVMC, FLASH */ 125 if (!object_property_set_uint(OBJECT(&s->nvm), "flash-size", 126 s->flash_size, errp)) { 127 return; 128 } 129 130 if (!sysbus_realize(SYS_BUS_DEVICE(&s->nvm), errp)) { 131 return; 132 } 133 134 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 0); 135 memory_region_add_subregion_overlap(&s->container, NRF51_NVMC_BASE, mr, 0); 136 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 1); 137 memory_region_add_subregion_overlap(&s->container, NRF51_FICR_BASE, mr, 0); 138 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 2); 139 memory_region_add_subregion_overlap(&s->container, NRF51_UICR_BASE, mr, 0); 140 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 3); 141 memory_region_add_subregion_overlap(&s->container, NRF51_FLASH_BASE, mr, 0); 142 143 /* GPIO */ 144 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) { 145 return; 146 } 147 148 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0); 149 memory_region_add_subregion_overlap(&s->container, NRF51_GPIO_BASE, mr, 0); 150 151 /* Pass all GPIOs to the SOC layer so they are available to the board */ 152 qdev_pass_gpios(DEVICE(&s->gpio), dev_soc, NULL); 153 154 /* TIMER */ 155 for (i = 0; i < NRF51_NUM_TIMERS; i++) { 156 if (!object_property_set_uint(OBJECT(&s->timer[i]), "id", i, errp)) { 157 return; 158 } 159 if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer[i]), errp)) { 160 return; 161 } 162 163 base_addr = NRF51_TIMER_BASE + i * NRF51_PERIPHERAL_SIZE; 164 165 sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer[i]), 0, base_addr); 166 sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer[i]), 0, 167 qdev_get_gpio_in(DEVICE(&s->cpu), 168 BASE_TO_IRQ(base_addr))); 169 } 170 171 /* STUB Peripherals */ 172 memory_region_init_io(&s->clock, OBJECT(dev_soc), &clock_ops, NULL, 173 "nrf51_soc.clock", NRF51_PERIPHERAL_SIZE); 174 memory_region_add_subregion_overlap(&s->container, 175 NRF51_IOMEM_BASE, &s->clock, -1); 176 177 create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE, 178 NRF51_IOMEM_SIZE); 179 create_unimplemented_device("nrf51_soc.private", 180 NRF51_PRIVATE_BASE, NRF51_PRIVATE_SIZE); 181 } 182 183 static void nrf51_soc_init(Object *obj) 184 { 185 uint8_t i = 0; 186 187 NRF51State *s = NRF51_SOC(obj); 188 189 memory_region_init(&s->container, obj, "nrf51-container", UINT64_MAX); 190 191 object_initialize_child(OBJECT(s), "armv6m", &s->cpu, TYPE_ARMV7M); 192 qdev_prop_set_string(DEVICE(&s->cpu), "cpu-type", 193 ARM_CPU_TYPE_NAME("cortex-m0")); 194 qdev_prop_set_uint32(DEVICE(&s->cpu), "num-irq", 32); 195 196 object_initialize_child(obj, "uart", &s->uart, TYPE_NRF51_UART); 197 object_property_add_alias(obj, "serial0", OBJECT(&s->uart), "chardev"); 198 199 object_initialize_child(obj, "rng", &s->rng, TYPE_NRF51_RNG); 200 201 object_initialize_child(obj, "nvm", &s->nvm, TYPE_NRF51_NVM); 202 203 object_initialize_child(obj, "gpio", &s->gpio, TYPE_NRF51_GPIO); 204 205 for (i = 0; i < NRF51_NUM_TIMERS; i++) { 206 object_initialize_child(obj, "timer[*]", &s->timer[i], 207 TYPE_NRF51_TIMER); 208 209 } 210 211 s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0); 212 } 213 214 static Property nrf51_soc_properties[] = { 215 DEFINE_PROP_LINK("memory", NRF51State, board_memory, TYPE_MEMORY_REGION, 216 MemoryRegion *), 217 DEFINE_PROP_UINT32("sram-size", NRF51State, sram_size, NRF51822_SRAM_SIZE), 218 DEFINE_PROP_UINT32("flash-size", NRF51State, flash_size, 219 NRF51822_FLASH_SIZE), 220 DEFINE_PROP_END_OF_LIST(), 221 }; 222 223 static void nrf51_soc_class_init(ObjectClass *klass, void *data) 224 { 225 DeviceClass *dc = DEVICE_CLASS(klass); 226 227 dc->realize = nrf51_soc_realize; 228 device_class_set_props(dc, nrf51_soc_properties); 229 } 230 231 static const TypeInfo nrf51_soc_info = { 232 .name = TYPE_NRF51_SOC, 233 .parent = TYPE_SYS_BUS_DEVICE, 234 .instance_size = sizeof(NRF51State), 235 .instance_init = nrf51_soc_init, 236 .class_init = nrf51_soc_class_init, 237 }; 238 239 static void nrf51_soc_types(void) 240 { 241 type_register_static(&nrf51_soc_info); 242 } 243 type_init(nrf51_soc_types) 244