1 /* 2 * ARM V2M MPS2 board emulation. 3 * 4 * Copyright (c) 2017 Linaro Limited 5 * Written by Peter Maydell 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 or 9 * (at your option) any later version. 10 */ 11 12 /* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger 13 * FPGA but is otherwise the same as the 2). Since the CPU itself 14 * and most of the devices are in the FPGA, the details of the board 15 * as seen by the guest depend significantly on the FPGA image. 16 * We model the following FPGA images: 17 * "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385 18 * "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386 19 * "mps2-an500" -- Cortex-M7 as documented in ARM Application Note AN500 20 * "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511 21 * 22 * Links to the TRM for the board itself and to the various Application 23 * Notes which document the FPGA images can be found here: 24 * https://developer.arm.com/products/system-design/development-boards/cortex-m-prototyping-system 25 */ 26 27 #include "qemu/osdep.h" 28 #include "qemu/units.h" 29 #include "qemu/cutils.h" 30 #include "qapi/error.h" 31 #include "qemu/error-report.h" 32 #include "hw/arm/boot.h" 33 #include "hw/arm/armv7m.h" 34 #include "hw/or-irq.h" 35 #include "hw/boards.h" 36 #include "exec/address-spaces.h" 37 #include "sysemu/sysemu.h" 38 #include "hw/misc/unimp.h" 39 #include "hw/char/cmsdk-apb-uart.h" 40 #include "hw/timer/cmsdk-apb-timer.h" 41 #include "hw/timer/cmsdk-apb-dualtimer.h" 42 #include "hw/misc/mps2-scc.h" 43 #include "hw/misc/mps2-fpgaio.h" 44 #include "hw/ssi/pl022.h" 45 #include "hw/i2c/arm_sbcon_i2c.h" 46 #include "hw/net/lan9118.h" 47 #include "net/net.h" 48 #include "hw/watchdog/cmsdk-apb-watchdog.h" 49 #include "hw/qdev-clock.h" 50 #include "qom/object.h" 51 52 typedef enum MPS2FPGAType { 53 FPGA_AN385, 54 FPGA_AN386, 55 FPGA_AN500, 56 FPGA_AN511, 57 } MPS2FPGAType; 58 59 struct MPS2MachineClass { 60 MachineClass parent; 61 MPS2FPGAType fpga_type; 62 uint32_t scc_id; 63 bool has_block_ram; 64 hwaddr ethernet_base; 65 hwaddr psram_base; 66 }; 67 68 struct MPS2MachineState { 69 MachineState parent; 70 71 ARMv7MState armv7m; 72 MemoryRegion ssram1; 73 MemoryRegion ssram1_m; 74 MemoryRegion ssram23; 75 MemoryRegion ssram23_m; 76 MemoryRegion blockram; 77 MemoryRegion blockram_m1; 78 MemoryRegion blockram_m2; 79 MemoryRegion blockram_m3; 80 MemoryRegion sram; 81 /* FPGA APB subsystem */ 82 MPS2SCC scc; 83 MPS2FPGAIO fpgaio; 84 /* CMSDK APB subsystem */ 85 CMSDKAPBDualTimer dualtimer; 86 CMSDKAPBWatchdog watchdog; 87 CMSDKAPBTimer timer[2]; 88 Clock *sysclk; 89 Clock *refclk; 90 }; 91 92 #define TYPE_MPS2_MACHINE "mps2" 93 #define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385") 94 #define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386") 95 #define TYPE_MPS2_AN500_MACHINE MACHINE_TYPE_NAME("mps2-an500") 96 #define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511") 97 98 OBJECT_DECLARE_TYPE(MPS2MachineState, MPS2MachineClass, MPS2_MACHINE) 99 100 /* Main SYSCLK frequency in Hz */ 101 #define SYSCLK_FRQ 25000000 102 103 /* 104 * The Application Notes don't say anything about how the 105 * systick reference clock is configured. (Quite possibly 106 * they don't have one at all.) This 1MHz clock matches the 107 * pre-existing behaviour that used to be hardcoded in the 108 * armv7m_systick implementation. 109 */ 110 #define REFCLK_FRQ (1 * 1000 * 1000) 111 112 /* Initialize the auxiliary RAM region @mr and map it into 113 * the memory map at @base. 114 */ 115 static void make_ram(MemoryRegion *mr, const char *name, 116 hwaddr base, hwaddr size) 117 { 118 memory_region_init_ram(mr, NULL, name, size, &error_fatal); 119 memory_region_add_subregion(get_system_memory(), base, mr); 120 } 121 122 /* Create an alias of an entire original MemoryRegion @orig 123 * located at @base in the memory map. 124 */ 125 static void make_ram_alias(MemoryRegion *mr, const char *name, 126 MemoryRegion *orig, hwaddr base) 127 { 128 memory_region_init_alias(mr, NULL, name, orig, 0, 129 memory_region_size(orig)); 130 memory_region_add_subregion(get_system_memory(), base, mr); 131 } 132 133 static void mps2_common_init(MachineState *machine) 134 { 135 MPS2MachineState *mms = MPS2_MACHINE(machine); 136 MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine); 137 MemoryRegion *system_memory = get_system_memory(); 138 MachineClass *mc = MACHINE_GET_CLASS(machine); 139 DeviceState *armv7m, *sccdev; 140 int i; 141 142 if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { 143 error_report("This board can only be used with CPU %s", 144 mc->default_cpu_type); 145 exit(1); 146 } 147 148 if (machine->ram_size != mc->default_ram_size) { 149 char *sz = size_to_str(mc->default_ram_size); 150 error_report("Invalid RAM size, should be %s", sz); 151 g_free(sz); 152 exit(EXIT_FAILURE); 153 } 154 155 /* This clock doesn't need migration because it is fixed-frequency */ 156 mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); 157 clock_set_hz(mms->sysclk, SYSCLK_FRQ); 158 159 mms->refclk = clock_new(OBJECT(machine), "REFCLK"); 160 clock_set_hz(mms->refclk, REFCLK_FRQ); 161 162 /* The FPGA images have an odd combination of different RAMs, 163 * because in hardware they are different implementations and 164 * connected to different buses, giving varying performance/size 165 * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily 166 * call the 16MB our "system memory", as it's the largest lump. 167 * 168 * AN385/AN386/AN511: 169 * 0x21000000 .. 0x21ffffff : PSRAM (16MB) 170 * AN385/AN386/AN500: 171 * 0x00000000 .. 0x003fffff : ZBT SSRAM1 172 * 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1 173 * 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3 174 * 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3 175 * AN385/AN386 only: 176 * 0x01000000 .. 0x01003fff : block RAM (16K) 177 * 0x01004000 .. 0x01007fff : mirror of above 178 * 0x01008000 .. 0x0100bfff : mirror of above 179 * 0x0100c000 .. 0x0100ffff : mirror of above 180 * AN511 only: 181 * 0x00000000 .. 0x0003ffff : FPGA block RAM 182 * 0x00400000 .. 0x007fffff : ZBT SSRAM1 183 * 0x20000000 .. 0x2001ffff : SRAM 184 * 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3 185 * AN500 only: 186 * 0x60000000 .. 0x60ffffff : PSRAM (16MB) 187 * 188 * The AN385/AN386 has a feature where the lowest 16K can be mapped 189 * either to the bottom of the ZBT SSRAM1 or to the block RAM. 190 * This is of no use for QEMU so we don't implement it (as if 191 * zbt_boot_ctrl is always zero). 192 */ 193 memory_region_add_subregion(system_memory, mmc->psram_base, machine->ram); 194 195 if (mmc->has_block_ram) { 196 make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000); 197 make_ram_alias(&mms->blockram_m1, "mps.blockram_m1", 198 &mms->blockram, 0x01004000); 199 make_ram_alias(&mms->blockram_m2, "mps.blockram_m2", 200 &mms->blockram, 0x01008000); 201 make_ram_alias(&mms->blockram_m3, "mps.blockram_m3", 202 &mms->blockram, 0x0100c000); 203 } 204 205 switch (mmc->fpga_type) { 206 case FPGA_AN385: 207 case FPGA_AN386: 208 case FPGA_AN500: 209 make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000); 210 make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000); 211 make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000); 212 make_ram_alias(&mms->ssram23_m, "mps.ssram23_m", 213 &mms->ssram23, 0x20400000); 214 break; 215 case FPGA_AN511: 216 make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000); 217 make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000); 218 make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000); 219 make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000); 220 break; 221 default: 222 g_assert_not_reached(); 223 } 224 225 object_initialize_child(OBJECT(mms), "armv7m", &mms->armv7m, TYPE_ARMV7M); 226 armv7m = DEVICE(&mms->armv7m); 227 switch (mmc->fpga_type) { 228 case FPGA_AN385: 229 case FPGA_AN386: 230 case FPGA_AN500: 231 qdev_prop_set_uint32(armv7m, "num-irq", 32); 232 break; 233 case FPGA_AN511: 234 qdev_prop_set_uint32(armv7m, "num-irq", 64); 235 break; 236 default: 237 g_assert_not_reached(); 238 } 239 qdev_connect_clock_in(armv7m, "cpuclk", mms->sysclk); 240 qdev_connect_clock_in(armv7m, "refclk", mms->refclk); 241 qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type); 242 qdev_prop_set_bit(armv7m, "enable-bitband", true); 243 object_property_set_link(OBJECT(&mms->armv7m), "memory", 244 OBJECT(system_memory), &error_abort); 245 sysbus_realize(SYS_BUS_DEVICE(&mms->armv7m), &error_fatal); 246 247 create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000); 248 create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000); 249 create_unimplemented_device("Block RAM", 0x01000000, 0x00010000); 250 create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000); 251 create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000); 252 create_unimplemented_device("PSRAM", 0x21000000, 0x01000000); 253 /* These three ranges all cover multiple devices; we may implement 254 * some of them below (in which case the real device takes precedence 255 * over the unimplemented-region mapping). 256 */ 257 create_unimplemented_device("CMSDK APB peripheral region @0x40000000", 258 0x40000000, 0x00010000); 259 create_unimplemented_device("CMSDK AHB peripheral region @0x40010000", 260 0x40010000, 0x00010000); 261 create_unimplemented_device("Extra peripheral region @0x40020000", 262 0x40020000, 0x00010000); 263 264 create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000); 265 create_unimplemented_device("VGA", 0x41000000, 0x0200000); 266 267 switch (mmc->fpga_type) { 268 case FPGA_AN385: 269 case FPGA_AN386: 270 case FPGA_AN500: 271 { 272 /* The overflow IRQs for UARTs 0, 1 and 2 are ORed together. 273 * Overflow for UARTs 4 and 5 doesn't trigger any interrupt. 274 */ 275 Object *orgate; 276 DeviceState *orgate_dev; 277 278 orgate = object_new(TYPE_OR_IRQ); 279 object_property_set_int(orgate, "num-lines", 6, &error_fatal); 280 qdev_realize(DEVICE(orgate), NULL, &error_fatal); 281 orgate_dev = DEVICE(orgate); 282 qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12)); 283 284 for (i = 0; i < 5; i++) { 285 static const hwaddr uartbase[] = {0x40004000, 0x40005000, 286 0x40006000, 0x40007000, 287 0x40009000}; 288 /* RX irq number; TX irq is always one greater */ 289 static const int uartirq[] = {0, 2, 4, 18, 20}; 290 qemu_irq txovrint = NULL, rxovrint = NULL; 291 292 if (i < 3) { 293 txovrint = qdev_get_gpio_in(orgate_dev, i * 2); 294 rxovrint = qdev_get_gpio_in(orgate_dev, i * 2 + 1); 295 } 296 297 cmsdk_apb_uart_create(uartbase[i], 298 qdev_get_gpio_in(armv7m, uartirq[i] + 1), 299 qdev_get_gpio_in(armv7m, uartirq[i]), 300 txovrint, rxovrint, 301 NULL, 302 serial_hd(i), SYSCLK_FRQ); 303 } 304 break; 305 } 306 case FPGA_AN511: 307 { 308 /* The overflow IRQs for all UARTs are ORed together. 309 * Tx and Rx IRQs for each UART are ORed together. 310 */ 311 Object *orgate; 312 DeviceState *orgate_dev; 313 314 orgate = object_new(TYPE_OR_IRQ); 315 object_property_set_int(orgate, "num-lines", 10, &error_fatal); 316 qdev_realize(DEVICE(orgate), NULL, &error_fatal); 317 orgate_dev = DEVICE(orgate); 318 qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12)); 319 320 for (i = 0; i < 5; i++) { 321 /* system irq numbers for the combined tx/rx for each UART */ 322 static const int uart_txrx_irqno[] = {0, 2, 45, 46, 56}; 323 static const hwaddr uartbase[] = {0x40004000, 0x40005000, 324 0x4002c000, 0x4002d000, 325 0x4002e000}; 326 Object *txrx_orgate; 327 DeviceState *txrx_orgate_dev; 328 329 txrx_orgate = object_new(TYPE_OR_IRQ); 330 object_property_set_int(txrx_orgate, "num-lines", 2, &error_fatal); 331 qdev_realize(DEVICE(txrx_orgate), NULL, &error_fatal); 332 txrx_orgate_dev = DEVICE(txrx_orgate); 333 qdev_connect_gpio_out(txrx_orgate_dev, 0, 334 qdev_get_gpio_in(armv7m, uart_txrx_irqno[i])); 335 cmsdk_apb_uart_create(uartbase[i], 336 qdev_get_gpio_in(txrx_orgate_dev, 0), 337 qdev_get_gpio_in(txrx_orgate_dev, 1), 338 qdev_get_gpio_in(orgate_dev, i * 2), 339 qdev_get_gpio_in(orgate_dev, i * 2 + 1), 340 NULL, 341 serial_hd(i), SYSCLK_FRQ); 342 } 343 break; 344 } 345 default: 346 g_assert_not_reached(); 347 } 348 for (i = 0; i < 4; i++) { 349 static const hwaddr gpiobase[] = {0x40010000, 0x40011000, 350 0x40012000, 0x40013000}; 351 create_unimplemented_device("cmsdk-ahb-gpio", gpiobase[i], 0x1000); 352 } 353 354 /* CMSDK APB subsystem */ 355 for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { 356 g_autofree char *name = g_strdup_printf("timer%d", i); 357 hwaddr base = 0x40000000 + i * 0x1000; 358 int irqno = 8 + i; 359 SysBusDevice *sbd; 360 361 object_initialize_child(OBJECT(mms), name, &mms->timer[i], 362 TYPE_CMSDK_APB_TIMER); 363 sbd = SYS_BUS_DEVICE(&mms->timer[i]); 364 qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); 365 sysbus_realize_and_unref(sbd, &error_fatal); 366 sysbus_mmio_map(sbd, 0, base); 367 sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); 368 } 369 370 object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, 371 TYPE_CMSDK_APB_DUALTIMER); 372 qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); 373 sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); 374 sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, 375 qdev_get_gpio_in(armv7m, 10)); 376 sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); 377 object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, 378 TYPE_CMSDK_APB_WATCHDOG); 379 qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); 380 sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); 381 sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, 382 qdev_get_gpio_in_named(armv7m, "NMI", 0)); 383 sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0x40008000); 384 385 /* FPGA APB subsystem */ 386 object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); 387 sccdev = DEVICE(&mms->scc); 388 qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); 389 qdev_prop_set_uint32(sccdev, "scc-aid", 0x00200008); 390 qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); 391 /* All these FPGA images have the same OSCCLK configuration */ 392 qdev_prop_set_uint32(sccdev, "len-oscclk", 3); 393 qdev_prop_set_uint32(sccdev, "oscclk[0]", 50000000); 394 qdev_prop_set_uint32(sccdev, "oscclk[1]", 24576000); 395 qdev_prop_set_uint32(sccdev, "oscclk[2]", 25000000); 396 sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); 397 sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000); 398 object_initialize_child(OBJECT(mms), "fpgaio", 399 &mms->fpgaio, TYPE_MPS2_FPGAIO); 400 qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000); 401 sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); 402 sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000); 403 sysbus_create_simple(TYPE_PL022, 0x40025000, /* External ADC */ 404 qdev_get_gpio_in(armv7m, 22)); 405 for (i = 0; i < 2; i++) { 406 static const int spi_irqno[] = {11, 24}; 407 static const hwaddr spibase[] = {0x40020000, /* APB */ 408 0x40021000, /* LCD */ 409 0x40026000, /* Shield0 */ 410 0x40027000}; /* Shield1 */ 411 DeviceState *orgate_dev; 412 Object *orgate; 413 int j; 414 415 orgate = object_new(TYPE_OR_IRQ); 416 object_property_set_int(orgate, "num-lines", 2, &error_fatal); 417 orgate_dev = DEVICE(orgate); 418 qdev_realize(orgate_dev, NULL, &error_fatal); 419 qdev_connect_gpio_out(orgate_dev, 0, 420 qdev_get_gpio_in(armv7m, spi_irqno[i])); 421 for (j = 0; j < 2; j++) { 422 sysbus_create_simple(TYPE_PL022, spibase[2 * i + j], 423 qdev_get_gpio_in(orgate_dev, j)); 424 } 425 } 426 for (i = 0; i < 4; i++) { 427 static const hwaddr i2cbase[] = {0x40022000, /* Touch */ 428 0x40023000, /* Audio */ 429 0x40029000, /* Shield0 */ 430 0x4002a000}; /* Shield1 */ 431 DeviceState *dev; 432 433 dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); 434 if (i < 2) { 435 /* 436 * internal-only bus: mark it full to avoid user-created 437 * i2c devices being plugged into it. 438 */ 439 BusState *qbus = qdev_get_child_bus(dev, "i2c"); 440 qbus_mark_full(qbus); 441 } 442 } 443 create_unimplemented_device("i2s", 0x40024000, 0x400); 444 445 /* In hardware this is a LAN9220; the LAN9118 is software compatible 446 * except that it doesn't support the checksum-offload feature. 447 */ 448 lan9118_init(&nd_table[0], mmc->ethernet_base, 449 qdev_get_gpio_in(armv7m, 450 mmc->fpga_type == FPGA_AN511 ? 47 : 13)); 451 452 armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 453 0x400000); 454 } 455 456 static void mps2_class_init(ObjectClass *oc, void *data) 457 { 458 MachineClass *mc = MACHINE_CLASS(oc); 459 460 mc->init = mps2_common_init; 461 mc->max_cpus = 1; 462 mc->default_ram_size = 16 * MiB; 463 mc->default_ram_id = "mps.ram"; 464 } 465 466 static void mps2_an385_class_init(ObjectClass *oc, void *data) 467 { 468 MachineClass *mc = MACHINE_CLASS(oc); 469 MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); 470 471 mc->desc = "ARM MPS2 with AN385 FPGA image for Cortex-M3"; 472 mmc->fpga_type = FPGA_AN385; 473 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); 474 mmc->scc_id = 0x41043850; 475 mmc->psram_base = 0x21000000; 476 mmc->ethernet_base = 0x40200000; 477 mmc->has_block_ram = true; 478 } 479 480 static void mps2_an386_class_init(ObjectClass *oc, void *data) 481 { 482 MachineClass *mc = MACHINE_CLASS(oc); 483 MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); 484 485 mc->desc = "ARM MPS2 with AN386 FPGA image for Cortex-M4"; 486 mmc->fpga_type = FPGA_AN386; 487 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); 488 mmc->scc_id = 0x41043860; 489 mmc->psram_base = 0x21000000; 490 mmc->ethernet_base = 0x40200000; 491 mmc->has_block_ram = true; 492 } 493 494 static void mps2_an500_class_init(ObjectClass *oc, void *data) 495 { 496 MachineClass *mc = MACHINE_CLASS(oc); 497 MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); 498 499 mc->desc = "ARM MPS2 with AN500 FPGA image for Cortex-M7"; 500 mmc->fpga_type = FPGA_AN500; 501 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m7"); 502 mmc->scc_id = 0x41045000; 503 mmc->psram_base = 0x60000000; 504 mmc->ethernet_base = 0xa0000000; 505 mmc->has_block_ram = false; 506 } 507 508 static void mps2_an511_class_init(ObjectClass *oc, void *data) 509 { 510 MachineClass *mc = MACHINE_CLASS(oc); 511 MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); 512 513 mc->desc = "ARM MPS2 with AN511 DesignStart FPGA image for Cortex-M3"; 514 mmc->fpga_type = FPGA_AN511; 515 mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); 516 mmc->scc_id = 0x41045110; 517 mmc->psram_base = 0x21000000; 518 mmc->ethernet_base = 0x40200000; 519 mmc->has_block_ram = false; 520 } 521 522 static const TypeInfo mps2_info = { 523 .name = TYPE_MPS2_MACHINE, 524 .parent = TYPE_MACHINE, 525 .abstract = true, 526 .instance_size = sizeof(MPS2MachineState), 527 .class_size = sizeof(MPS2MachineClass), 528 .class_init = mps2_class_init, 529 }; 530 531 static const TypeInfo mps2_an385_info = { 532 .name = TYPE_MPS2_AN385_MACHINE, 533 .parent = TYPE_MPS2_MACHINE, 534 .class_init = mps2_an385_class_init, 535 }; 536 537 static const TypeInfo mps2_an386_info = { 538 .name = TYPE_MPS2_AN386_MACHINE, 539 .parent = TYPE_MPS2_MACHINE, 540 .class_init = mps2_an386_class_init, 541 }; 542 543 static const TypeInfo mps2_an500_info = { 544 .name = TYPE_MPS2_AN500_MACHINE, 545 .parent = TYPE_MPS2_MACHINE, 546 .class_init = mps2_an500_class_init, 547 }; 548 549 static const TypeInfo mps2_an511_info = { 550 .name = TYPE_MPS2_AN511_MACHINE, 551 .parent = TYPE_MPS2_MACHINE, 552 .class_init = mps2_an511_class_init, 553 }; 554 555 static void mps2_machine_init(void) 556 { 557 type_register_static(&mps2_info); 558 type_register_static(&mps2_an385_info); 559 type_register_static(&mps2_an386_info); 560 type_register_static(&mps2_an500_info); 561 type_register_static(&mps2_an511_info); 562 } 563 564 type_init(mps2_machine_init); 565