xref: /openbmc/qemu/hw/arm/kzm.c (revision 200dbf37)
1 /*
2  * KZM Board System emulation.
3  *
4  * Copyright (c) 2008 OKL and 2011 NICTA
5  * Written by Hans at OK-Labs
6  * Updated by Peter Chubb.
7  *
8  * This code is licensed under the GPL, version 2 or later.
9  * See the file `COPYING' in the top level directory.
10  *
11  * It (partially) emulates a Kyoto Microcomputer
12  * KZM-ARM11-01 evaluation board, with a Freescale
13  * i.MX31 SoC
14  */
15 
16 #include "qemu/osdep.h"
17 #include "qapi/error.h"
18 #include "qemu-common.h"
19 #include "cpu.h"
20 #include "hw/arm/fsl-imx31.h"
21 #include "hw/boards.h"
22 #include "qemu/error-report.h"
23 #include "exec/address-spaces.h"
24 #include "net/net.h"
25 #include "hw/net/lan9118.h"
26 #include "hw/char/serial.h"
27 #include "sysemu/qtest.h"
28 
29 /* Memory map for Kzm Emulation Baseboard:
30  * 0x00000000-0x7fffffff See i.MX31 SOC for support
31  * 0x80000000-0x8fffffff RAM                  EMULATED
32  * 0x90000000-0x9fffffff RAM                  EMULATED
33  * 0xa0000000-0xafffffff Flash                IGNORED
34  * 0xb0000000-0xb3ffffff Unavailable          IGNORED
35  * 0xb4000000-0xb4000fff 8-bit free space     IGNORED
36  * 0xb4001000-0xb400100f Board control        IGNORED
37  *  0xb4001003           DIP switch
38  * 0xb4001010-0xb400101f 7-segment LED        IGNORED
39  * 0xb4001020-0xb400102f LED                  IGNORED
40  * 0xb4001030-0xb400103f LED                  IGNORED
41  * 0xb4001040-0xb400104f FPGA, UART           EMULATED
42  * 0xb4001050-0xb400105f FPGA, UART           EMULATED
43  * 0xb4001060-0xb40fffff FPGA                 IGNORED
44  * 0xb6000000-0xb61fffff LAN controller       EMULATED
45  * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
46  * 0xb6300000-0xb7ffffff Free                 IGNORED
47  * 0xb8000000-0xb8004fff Memory control registers IGNORED
48  * 0xc0000000-0xc3ffffff PCMCIA/CF            IGNORED
49  * 0xc4000000-0xffffffff Reserved             IGNORED
50  */
51 
52 typedef struct IMX31KZM {
53     FslIMX31State soc;
54     MemoryRegion ram;
55     MemoryRegion ram_alias;
56 } IMX31KZM;
57 
58 #define KZM_RAM_ADDR            (FSL_IMX31_SDRAM0_ADDR)
59 #define KZM_FPGA_ADDR           (FSL_IMX31_CS4_ADDR + 0x1040)
60 #define KZM_LAN9118_ADDR        (FSL_IMX31_CS5_ADDR)
61 
62 static struct arm_boot_info kzm_binfo = {
63     .loader_start = KZM_RAM_ADDR,
64     .board_id = 1722,
65 };
66 
67 static void kzm_init(MachineState *machine)
68 {
69     IMX31KZM *s = g_new0(IMX31KZM, 1);
70     unsigned int ram_size;
71     unsigned int alias_offset;
72     unsigned int i;
73 
74     object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc),
75                             TYPE_FSL_IMX31, &error_abort, NULL);
76 
77     object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal);
78 
79     /* Check the amount of memory is compatible with the SOC */
80     if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE)) {
81         warn_report("RAM size " RAM_ADDR_FMT " above max supported, "
82                     "reduced to %x", machine->ram_size,
83                     FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE);
84         machine->ram_size = FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE;
85     }
86 
87     memory_region_allocate_system_memory(&s->ram, NULL, "kzm.ram",
88                                          machine->ram_size);
89     memory_region_add_subregion(get_system_memory(), FSL_IMX31_SDRAM0_ADDR,
90                                 &s->ram);
91 
92     /* initialize the alias memory if any */
93     for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
94          (i < 2) && ram_size; i++) {
95         unsigned int size;
96         static const struct {
97             hwaddr addr;
98             unsigned int size;
99         } ram[2] = {
100             { FSL_IMX31_SDRAM0_ADDR, FSL_IMX31_SDRAM0_SIZE },
101             { FSL_IMX31_SDRAM1_ADDR, FSL_IMX31_SDRAM1_SIZE },
102         };
103 
104         size = MIN(ram_size, ram[i].size);
105 
106         ram_size -= size;
107 
108         if (size < ram[i].size) {
109             memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
110                                      &s->ram, alias_offset, ram[i].size - size);
111             memory_region_add_subregion(get_system_memory(),
112                                         ram[i].addr + size, &s->ram_alias);
113         }
114 
115         alias_offset += ram[i].size;
116     }
117 
118     if (nd_table[0].used) {
119         lan9118_init(&nd_table[0], KZM_LAN9118_ADDR,
120                      qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
121     }
122 
123     if (serial_hd(2)) { /* touchscreen */
124         serial_mm_init(get_system_memory(), KZM_FPGA_ADDR+0x10, 0,
125                        qdev_get_gpio_in(DEVICE(&s->soc.avic), 52),
126                        14745600, serial_hd(2), DEVICE_NATIVE_ENDIAN);
127     }
128 
129     kzm_binfo.ram_size = machine->ram_size;
130     kzm_binfo.kernel_filename = machine->kernel_filename;
131     kzm_binfo.kernel_cmdline = machine->kernel_cmdline;
132     kzm_binfo.initrd_filename = machine->initrd_filename;
133     kzm_binfo.nb_cpus = 1;
134 
135     if (!qtest_enabled()) {
136         arm_load_kernel(&s->soc.cpu, &kzm_binfo);
137     }
138 }
139 
140 static void kzm_machine_init(MachineClass *mc)
141 {
142     mc->desc = "ARM KZM Emulation Baseboard (ARM1136)";
143     mc->init = kzm_init;
144     mc->ignore_memory_transaction_failures = true;
145 }
146 
147 DEFINE_MACHINE("kzm", kzm_machine_init)
148