1 /* 2 * Calxeda Highbank SoC emulation 3 * 4 * Copyright (c) 2010-2012 Calxeda 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms and conditions of the GNU General Public License, 8 * version 2 or later, as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 * more details. 14 * 15 * You should have received a copy of the GNU General Public License along with 16 * this program. If not, see <http://www.gnu.org/licenses/>. 17 * 18 */ 19 20 #include "qemu/osdep.h" 21 #include "qemu/datadir.h" 22 #include "qapi/error.h" 23 #include "hw/sysbus.h" 24 #include "migration/vmstate.h" 25 #include "hw/arm/boot.h" 26 #include "hw/loader.h" 27 #include "net/net.h" 28 #include "sysemu/runstate.h" 29 #include "sysemu/sysemu.h" 30 #include "hw/boards.h" 31 #include "qemu/error-report.h" 32 #include "hw/char/pl011.h" 33 #include "hw/ide/ahci.h" 34 #include "hw/cpu/a9mpcore.h" 35 #include "hw/cpu/a15mpcore.h" 36 #include "qemu/log.h" 37 #include "qom/object.h" 38 #include "cpu.h" 39 40 #define SMP_BOOT_ADDR 0x100 41 #define SMP_BOOT_REG 0x40 42 #define MPCORE_PERIPHBASE 0xfff10000 43 44 #define MVBAR_ADDR 0x200 45 #define BOARD_SETUP_ADDR (MVBAR_ADDR + 8 * sizeof(uint32_t)) 46 47 #define NIRQ_GIC 160 48 49 /* Board init. */ 50 51 #define NUM_REGS 0x200 52 static void hb_regs_write(void *opaque, hwaddr offset, 53 uint64_t value, unsigned size) 54 { 55 uint32_t *regs = opaque; 56 57 if (offset == 0xf00) { 58 if (value == 1 || value == 2) { 59 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 60 } else if (value == 3) { 61 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 62 } 63 } 64 65 if (offset / 4 >= NUM_REGS) { 66 qemu_log_mask(LOG_GUEST_ERROR, 67 "highbank: bad write offset 0x%" HWADDR_PRIx "\n", offset); 68 return; 69 } 70 regs[offset / 4] = value; 71 } 72 73 static uint64_t hb_regs_read(void *opaque, hwaddr offset, 74 unsigned size) 75 { 76 uint32_t value; 77 uint32_t *regs = opaque; 78 79 if (offset / 4 >= NUM_REGS) { 80 qemu_log_mask(LOG_GUEST_ERROR, 81 "highbank: bad read offset 0x%" HWADDR_PRIx "\n", offset); 82 return 0; 83 } 84 value = regs[offset / 4]; 85 86 if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) { 87 value |= 0x30000000; 88 } 89 90 return value; 91 } 92 93 static const MemoryRegionOps hb_mem_ops = { 94 .read = hb_regs_read, 95 .write = hb_regs_write, 96 .endianness = DEVICE_NATIVE_ENDIAN, 97 }; 98 99 #define TYPE_HIGHBANK_REGISTERS "highbank-regs" 100 OBJECT_DECLARE_SIMPLE_TYPE(HighbankRegsState, HIGHBANK_REGISTERS) 101 102 struct HighbankRegsState { 103 /*< private >*/ 104 SysBusDevice parent_obj; 105 /*< public >*/ 106 107 MemoryRegion iomem; 108 uint32_t regs[NUM_REGS]; 109 }; 110 111 static const VMStateDescription vmstate_highbank_regs = { 112 .name = "highbank-regs", 113 .version_id = 0, 114 .minimum_version_id = 0, 115 .fields = (const VMStateField[]) { 116 VMSTATE_UINT32_ARRAY(regs, HighbankRegsState, NUM_REGS), 117 VMSTATE_END_OF_LIST(), 118 }, 119 }; 120 121 static void highbank_regs_reset(DeviceState *dev) 122 { 123 HighbankRegsState *s = HIGHBANK_REGISTERS(dev); 124 125 s->regs[0x40] = 0x05F20121; 126 s->regs[0x41] = 0x2; 127 s->regs[0x42] = 0x05F30121; 128 s->regs[0x43] = 0x05F40121; 129 } 130 131 static void highbank_regs_init(Object *obj) 132 { 133 HighbankRegsState *s = HIGHBANK_REGISTERS(obj); 134 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 135 136 memory_region_init_io(&s->iomem, obj, &hb_mem_ops, s->regs, 137 "highbank_regs", 0x1000); 138 sysbus_init_mmio(dev, &s->iomem); 139 } 140 141 static void highbank_regs_class_init(ObjectClass *klass, void *data) 142 { 143 DeviceClass *dc = DEVICE_CLASS(klass); 144 145 dc->desc = "Calxeda Highbank registers"; 146 dc->vmsd = &vmstate_highbank_regs; 147 dc->reset = highbank_regs_reset; 148 } 149 150 static const TypeInfo highbank_regs_info = { 151 .name = TYPE_HIGHBANK_REGISTERS, 152 .parent = TYPE_SYS_BUS_DEVICE, 153 .instance_size = sizeof(HighbankRegsState), 154 .instance_init = highbank_regs_init, 155 .class_init = highbank_regs_class_init, 156 }; 157 158 static void highbank_regs_register_types(void) 159 { 160 type_register_static(&highbank_regs_info); 161 } 162 163 type_init(highbank_regs_register_types) 164 165 static struct arm_boot_info highbank_binfo; 166 167 enum cxmachines { 168 CALXEDA_HIGHBANK, 169 CALXEDA_MIDWAY, 170 }; 171 172 /* ram_size must be set to match the upper bound of memory in the 173 * device tree (linux/arch/arm/boot/dts/highbank.dts), which is 174 * normally 0xff900000 or -m 4089. When running this board on a 175 * 32-bit host, set the reg value of memory to 0xf7ff00000 in the 176 * device tree and pass -m 2047 to QEMU. 177 */ 178 static void calxeda_init(MachineState *machine, enum cxmachines machine_id) 179 { 180 DeviceState *dev = NULL; 181 SysBusDevice *busdev; 182 qemu_irq pic[128]; 183 int n; 184 unsigned int smp_cpus = machine->smp.cpus; 185 qemu_irq cpu_irq[4]; 186 qemu_irq cpu_fiq[4]; 187 qemu_irq cpu_virq[4]; 188 qemu_irq cpu_vfiq[4]; 189 MemoryRegion *sysram; 190 MemoryRegion *sysmem; 191 char *sysboot_filename; 192 193 switch (machine_id) { 194 case CALXEDA_HIGHBANK: 195 machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); 196 break; 197 case CALXEDA_MIDWAY: 198 machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); 199 break; 200 default: 201 assert(0); 202 } 203 204 for (n = 0; n < smp_cpus; n++) { 205 Object *cpuobj; 206 ARMCPU *cpu; 207 208 cpuobj = object_new(machine->cpu_type); 209 cpu = ARM_CPU(cpuobj); 210 211 object_property_set_int(cpuobj, "psci-conduit", QEMU_PSCI_CONDUIT_SMC, 212 &error_abort); 213 214 if (object_property_find(cpuobj, "reset-cbar")) { 215 object_property_set_int(cpuobj, "reset-cbar", MPCORE_PERIPHBASE, 216 &error_abort); 217 } 218 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 219 cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); 220 cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ); 221 cpu_virq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VIRQ); 222 cpu_vfiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VFIQ); 223 } 224 225 sysmem = get_system_memory(); 226 /* SDRAM at address zero. */ 227 memory_region_add_subregion(sysmem, 0, machine->ram); 228 229 sysram = g_new(MemoryRegion, 1); 230 memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000, 231 &error_fatal); 232 memory_region_add_subregion(sysmem, 0xfff88000, sysram); 233 if (machine->firmware != NULL) { 234 sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, machine->firmware); 235 if (sysboot_filename != NULL) { 236 if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) { 237 error_report("Unable to load %s", machine->firmware); 238 exit(1); 239 } 240 g_free(sysboot_filename); 241 } else { 242 error_report("Unable to find %s", machine->firmware); 243 exit(1); 244 } 245 } 246 247 switch (machine_id) { 248 case CALXEDA_HIGHBANK: 249 dev = qdev_new("l2x0"); 250 busdev = SYS_BUS_DEVICE(dev); 251 sysbus_realize_and_unref(busdev, &error_fatal); 252 sysbus_mmio_map(busdev, 0, 0xfff12000); 253 254 dev = qdev_new(TYPE_A9MPCORE_PRIV); 255 break; 256 case CALXEDA_MIDWAY: 257 dev = qdev_new(TYPE_A15MPCORE_PRIV); 258 break; 259 } 260 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 261 qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC); 262 busdev = SYS_BUS_DEVICE(dev); 263 sysbus_realize_and_unref(busdev, &error_fatal); 264 sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); 265 for (n = 0; n < smp_cpus; n++) { 266 sysbus_connect_irq(busdev, n, cpu_irq[n]); 267 sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]); 268 sysbus_connect_irq(busdev, n + 2 * smp_cpus, cpu_virq[n]); 269 sysbus_connect_irq(busdev, n + 3 * smp_cpus, cpu_vfiq[n]); 270 } 271 272 for (n = 0; n < 128; n++) { 273 pic[n] = qdev_get_gpio_in(dev, n); 274 } 275 276 dev = qdev_new("sp804"); 277 qdev_prop_set_uint32(dev, "freq0", 150000000); 278 qdev_prop_set_uint32(dev, "freq1", 150000000); 279 busdev = SYS_BUS_DEVICE(dev); 280 sysbus_realize_and_unref(busdev, &error_fatal); 281 sysbus_mmio_map(busdev, 0, 0xfff34000); 282 sysbus_connect_irq(busdev, 0, pic[18]); 283 pl011_create(0xfff36000, pic[20], serial_hd(0)); 284 285 dev = qdev_new(TYPE_HIGHBANK_REGISTERS); 286 busdev = SYS_BUS_DEVICE(dev); 287 sysbus_realize_and_unref(busdev, &error_fatal); 288 sysbus_mmio_map(busdev, 0, 0xfff3c000); 289 290 sysbus_create_simple("pl061", 0xfff30000, pic[14]); 291 sysbus_create_simple("pl061", 0xfff31000, pic[15]); 292 sysbus_create_simple("pl061", 0xfff32000, pic[16]); 293 sysbus_create_simple("pl061", 0xfff33000, pic[17]); 294 sysbus_create_simple("pl031", 0xfff35000, pic[19]); 295 sysbus_create_simple("pl022", 0xfff39000, pic[23]); 296 297 sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]); 298 299 if (nd_table[0].used) { 300 qemu_check_nic_model(&nd_table[0], "xgmac"); 301 dev = qdev_new("xgmac"); 302 qdev_set_nic_properties(dev, &nd_table[0]); 303 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 304 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000); 305 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]); 306 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]); 307 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]); 308 309 qemu_check_nic_model(&nd_table[1], "xgmac"); 310 dev = qdev_new("xgmac"); 311 qdev_set_nic_properties(dev, &nd_table[1]); 312 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 313 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000); 314 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]); 315 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]); 316 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]); 317 } 318 319 /* TODO create and connect IDE devices for ide_drive_get() */ 320 321 highbank_binfo.ram_size = machine->ram_size; 322 /* highbank requires a dtb in order to boot, and the dtb will override 323 * the board ID. The following value is ignored, so set it to -1 to be 324 * clear that the value is meaningless. 325 */ 326 highbank_binfo.board_id = -1; 327 highbank_binfo.loader_start = 0; 328 highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; 329 highbank_binfo.psci_conduit = QEMU_PSCI_CONDUIT_SMC; 330 331 arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); 332 } 333 334 static void highbank_init(MachineState *machine) 335 { 336 calxeda_init(machine, CALXEDA_HIGHBANK); 337 } 338 339 static void midway_init(MachineState *machine) 340 { 341 calxeda_init(machine, CALXEDA_MIDWAY); 342 } 343 344 static void highbank_class_init(ObjectClass *oc, void *data) 345 { 346 MachineClass *mc = MACHINE_CLASS(oc); 347 348 mc->desc = "Calxeda Highbank (ECX-1000)"; 349 mc->init = highbank_init; 350 mc->block_default_type = IF_IDE; 351 mc->units_per_default_bus = 1; 352 mc->max_cpus = 4; 353 mc->ignore_memory_transaction_failures = true; 354 mc->default_ram_id = "highbank.dram"; 355 } 356 357 static const TypeInfo highbank_type = { 358 .name = MACHINE_TYPE_NAME("highbank"), 359 .parent = TYPE_MACHINE, 360 .class_init = highbank_class_init, 361 }; 362 363 static void midway_class_init(ObjectClass *oc, void *data) 364 { 365 MachineClass *mc = MACHINE_CLASS(oc); 366 367 mc->desc = "Calxeda Midway (ECX-2000)"; 368 mc->init = midway_init; 369 mc->block_default_type = IF_IDE; 370 mc->units_per_default_bus = 1; 371 mc->max_cpus = 4; 372 mc->ignore_memory_transaction_failures = true; 373 mc->default_ram_id = "highbank.dram"; 374 } 375 376 static const TypeInfo midway_type = { 377 .name = MACHINE_TYPE_NAME("midway"), 378 .parent = TYPE_MACHINE, 379 .class_init = midway_class_init, 380 }; 381 382 static void calxeda_machines_init(void) 383 { 384 type_register_static(&highbank_type); 385 type_register_static(&midway_type); 386 } 387 388 type_init(calxeda_machines_init) 389