xref: /openbmc/qemu/hw/arm/fsl-imx31.c (revision 135b03cb)
1 /*
2  * Copyright (c) 2013 Jean-Christophe Dubois <jcd@tribudubois.net>
3  *
4  * i.MX31 SOC emulation.
5  *
6  * Based on hw/arm/fsl-imx31.c
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License as published by the
10  *  Free Software Foundation; either version 2 of the License, or
11  *  (at your option) any later version.
12  *
13  *  This program is distributed in the hope that it will be useful, but WITHOUT
14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16  *  for more details.
17  *
18  *  You should have received a copy of the GNU General Public License along
19  *  with this program; if not, see <http://www.gnu.org/licenses/>.
20  */
21 
22 #include "qemu/osdep.h"
23 #include "qapi/error.h"
24 #include "cpu.h"
25 #include "hw/arm/fsl-imx31.h"
26 #include "sysemu/sysemu.h"
27 #include "exec/address-spaces.h"
28 #include "hw/qdev-properties.h"
29 #include "chardev/char.h"
30 
31 static void fsl_imx31_init(Object *obj)
32 {
33     FslIMX31State *s = FSL_IMX31(obj);
34     int i;
35 
36     object_initialize(&s->cpu, sizeof(s->cpu), "arm1136-" TYPE_ARM_CPU);
37 
38     sysbus_init_child_obj(obj, "avic", &s->avic, sizeof(s->avic),
39                           TYPE_IMX_AVIC);
40 
41     sysbus_init_child_obj(obj, "ccm", &s->ccm, sizeof(s->ccm), TYPE_IMX31_CCM);
42 
43     for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) {
44         sysbus_init_child_obj(obj, "uart[*]", &s->uart[i], sizeof(s->uart[i]),
45                               TYPE_IMX_SERIAL);
46     }
47 
48     sysbus_init_child_obj(obj, "gpt", &s->gpt, sizeof(s->gpt), TYPE_IMX31_GPT);
49 
50     for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) {
51         sysbus_init_child_obj(obj, "epit[*]", &s->epit[i], sizeof(s->epit[i]),
52                               TYPE_IMX_EPIT);
53     }
54 
55     for (i = 0; i < FSL_IMX31_NUM_I2CS; i++) {
56         sysbus_init_child_obj(obj, "i2c[*]", &s->i2c[i], sizeof(s->i2c[i]),
57                               TYPE_IMX_I2C);
58     }
59 
60     for (i = 0; i < FSL_IMX31_NUM_GPIOS; i++) {
61         sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]),
62                               TYPE_IMX_GPIO);
63     }
64 }
65 
66 static void fsl_imx31_realize(DeviceState *dev, Error **errp)
67 {
68     FslIMX31State *s = FSL_IMX31(dev);
69     uint16_t i;
70     Error *err = NULL;
71 
72     object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
73     if (err) {
74         error_propagate(errp, err);
75         return;
76     }
77 
78     object_property_set_bool(OBJECT(&s->avic), true, "realized", &err);
79     if (err) {
80         error_propagate(errp, err);
81         return;
82     }
83     sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX31_AVIC_ADDR);
84     sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0,
85                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
86     sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1,
87                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
88 
89     object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err);
90     if (err) {
91         error_propagate(errp, err);
92         return;
93     }
94     sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX31_CCM_ADDR);
95 
96     /* Initialize all UARTS */
97     for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) {
98         static const struct {
99             hwaddr addr;
100             unsigned int irq;
101         } serial_table[FSL_IMX31_NUM_UARTS] = {
102             { FSL_IMX31_UART1_ADDR, FSL_IMX31_UART1_IRQ },
103             { FSL_IMX31_UART2_ADDR, FSL_IMX31_UART2_IRQ },
104         };
105 
106         qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
107 
108         object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err);
109         if (err) {
110             error_propagate(errp, err);
111             return;
112         }
113 
114         sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
115         sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
116                            qdev_get_gpio_in(DEVICE(&s->avic),
117                                             serial_table[i].irq));
118     }
119 
120     s->gpt.ccm = IMX_CCM(&s->ccm);
121 
122     object_property_set_bool(OBJECT(&s->gpt), true, "realized", &err);
123     if (err) {
124         error_propagate(errp, err);
125         return;
126     }
127 
128     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt), 0, FSL_IMX31_GPT_ADDR);
129     sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt), 0,
130                        qdev_get_gpio_in(DEVICE(&s->avic), FSL_IMX31_GPT_IRQ));
131 
132     /* Initialize all EPIT timers */
133     for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) {
134         static const struct {
135             hwaddr addr;
136             unsigned int irq;
137         } epit_table[FSL_IMX31_NUM_EPITS] = {
138             { FSL_IMX31_EPIT1_ADDR, FSL_IMX31_EPIT1_IRQ },
139             { FSL_IMX31_EPIT2_ADDR, FSL_IMX31_EPIT2_IRQ },
140         };
141 
142         s->epit[i].ccm = IMX_CCM(&s->ccm);
143 
144         object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err);
145         if (err) {
146             error_propagate(errp, err);
147             return;
148         }
149 
150         sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr);
151         sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
152                            qdev_get_gpio_in(DEVICE(&s->avic),
153                                             epit_table[i].irq));
154     }
155 
156     /* Initialize all I2C */
157     for (i = 0; i < FSL_IMX31_NUM_I2CS; i++) {
158         static const struct {
159             hwaddr addr;
160             unsigned int irq;
161         } i2c_table[FSL_IMX31_NUM_I2CS] = {
162             { FSL_IMX31_I2C1_ADDR, FSL_IMX31_I2C1_IRQ },
163             { FSL_IMX31_I2C2_ADDR, FSL_IMX31_I2C2_IRQ },
164             { FSL_IMX31_I2C3_ADDR, FSL_IMX31_I2C3_IRQ }
165         };
166 
167         /* Initialize the I2C */
168         object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", &err);
169         if (err) {
170             error_propagate(errp, err);
171             return;
172         }
173         /* Map I2C memory */
174         sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
175         /* Connect I2C IRQ to PIC */
176         sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
177                            qdev_get_gpio_in(DEVICE(&s->avic),
178                                             i2c_table[i].irq));
179     }
180 
181     /* Initialize all GPIOs */
182     for (i = 0; i < FSL_IMX31_NUM_GPIOS; i++) {
183         static const struct {
184             hwaddr addr;
185             unsigned int irq;
186         } gpio_table[FSL_IMX31_NUM_GPIOS] = {
187             { FSL_IMX31_GPIO1_ADDR, FSL_IMX31_GPIO1_IRQ },
188             { FSL_IMX31_GPIO2_ADDR, FSL_IMX31_GPIO2_IRQ },
189             { FSL_IMX31_GPIO3_ADDR, FSL_IMX31_GPIO3_IRQ }
190         };
191 
192         object_property_set_bool(OBJECT(&s->gpio[i]), false, "has-edge-sel",
193                                  &error_abort);
194         object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", &err);
195         if (err) {
196             error_propagate(errp, err);
197             return;
198         }
199         sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
200         /* Connect GPIO IRQ to PIC */
201         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
202                            qdev_get_gpio_in(DEVICE(&s->avic),
203                                             gpio_table[i].irq));
204     }
205 
206     /* On a real system, the first 16k is a `secure boot rom' */
207     memory_region_init_rom(&s->secure_rom, NULL, "imx31.secure_rom",
208                            FSL_IMX31_SECURE_ROM_SIZE, &err);
209     if (err) {
210         error_propagate(errp, err);
211         return;
212     }
213     memory_region_add_subregion(get_system_memory(), FSL_IMX31_SECURE_ROM_ADDR,
214                                 &s->secure_rom);
215 
216     /* There is also a 16k ROM */
217     memory_region_init_rom(&s->rom, NULL, "imx31.rom",
218                            FSL_IMX31_ROM_SIZE, &err);
219     if (err) {
220         error_propagate(errp, err);
221         return;
222     }
223     memory_region_add_subregion(get_system_memory(), FSL_IMX31_ROM_ADDR,
224                                 &s->rom);
225 
226     /* initialize internal RAM (16 KB) */
227     memory_region_init_ram(&s->iram, NULL, "imx31.iram", FSL_IMX31_IRAM_SIZE,
228                            &err);
229     if (err) {
230         error_propagate(errp, err);
231         return;
232     }
233     memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ADDR,
234                                 &s->iram);
235 
236     /* internal RAM (16 KB) is aliased over 256 MB - 16 KB */
237     memory_region_init_alias(&s->iram_alias, NULL, "imx31.iram_alias",
238                              &s->iram, 0, FSL_IMX31_IRAM_ALIAS_SIZE);
239     memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ALIAS_ADDR,
240                                 &s->iram_alias);
241 }
242 
243 static void fsl_imx31_class_init(ObjectClass *oc, void *data)
244 {
245     DeviceClass *dc = DEVICE_CLASS(oc);
246 
247     dc->realize = fsl_imx31_realize;
248     dc->desc = "i.MX31 SOC";
249     /*
250      * Reason: uses serial_hds in realize and the kzm board does not
251      * support multiple CPUs
252      */
253     dc->user_creatable = false;
254 }
255 
256 static const TypeInfo fsl_imx31_type_info = {
257     .name = TYPE_FSL_IMX31,
258     .parent = TYPE_DEVICE,
259     .instance_size = sizeof(FslIMX31State),
260     .instance_init = fsl_imx31_init,
261     .class_init = fsl_imx31_class_init,
262 };
263 
264 static void fsl_imx31_register_types(void)
265 {
266     type_register_static(&fsl_imx31_type_info);
267 }
268 
269 type_init(fsl_imx31_register_types)
270