xref: /openbmc/qemu/hw/arm/fsl-imx25.c (revision 542b10bd)
1 /*
2  * Copyright (c) 2013 Jean-Christophe Dubois <jcd@tribudubois.net>
3  *
4  * i.MX25 SOC emulation.
5  *
6  * Based on hw/arm/xlnx-zynqmp.c
7  *
8  * Copyright (C) 2015 Xilinx Inc
9  * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com>
10  *
11  *  This program is free software; you can redistribute it and/or modify it
12  *  under the terms of the GNU General Public License as published by the
13  *  Free Software Foundation; either version 2 of the License, or
14  *  (at your option) any later version.
15  *
16  *  This program is distributed in the hope that it will be useful, but WITHOUT
17  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
18  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
19  *  for more details.
20  *
21  *  You should have received a copy of the GNU General Public License along
22  *  with this program; if not, see <http://www.gnu.org/licenses/>.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "hw/arm/fsl-imx25.h"
28 #include "sysemu/sysemu.h"
29 #include "hw/qdev-properties.h"
30 #include "chardev/char.h"
31 #include "target/arm/cpu-qom.h"
32 
33 #define IMX25_ESDHC_CAPABILITIES     0x07e20000
34 
35 static void fsl_imx25_init(Object *obj)
36 {
37     FslIMX25State *s = FSL_IMX25(obj);
38     int i;
39 
40     object_initialize_child(obj, "cpu", &s->cpu, ARM_CPU_TYPE_NAME("arm926"));
41 
42     object_initialize_child(obj, "avic", &s->avic, TYPE_IMX_AVIC);
43 
44     object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX25_CCM);
45 
46     for (i = 0; i < FSL_IMX25_NUM_UARTS; i++) {
47         object_initialize_child(obj, "uart[*]", &s->uart[i], TYPE_IMX_SERIAL);
48     }
49 
50     for (i = 0; i < FSL_IMX25_NUM_GPTS; i++) {
51         object_initialize_child(obj, "gpt[*]", &s->gpt[i], TYPE_IMX25_GPT);
52     }
53 
54     for (i = 0; i < FSL_IMX25_NUM_EPITS; i++) {
55         object_initialize_child(obj, "epit[*]", &s->epit[i], TYPE_IMX_EPIT);
56     }
57 
58     object_initialize_child(obj, "fec", &s->fec, TYPE_IMX_FEC);
59 
60     object_initialize_child(obj, "rngc", &s->rngc, TYPE_IMX_RNGC);
61 
62     for (i = 0; i < FSL_IMX25_NUM_I2CS; i++) {
63         object_initialize_child(obj, "i2c[*]", &s->i2c[i], TYPE_IMX_I2C);
64     }
65 
66     for (i = 0; i < FSL_IMX25_NUM_GPIOS; i++) {
67         object_initialize_child(obj, "gpio[*]", &s->gpio[i], TYPE_IMX_GPIO);
68     }
69 
70     for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) {
71         object_initialize_child(obj, "sdhc[*]", &s->esdhc[i], TYPE_IMX_USDHC);
72     }
73 
74     for (i = 0; i < FSL_IMX25_NUM_USBS; i++) {
75         object_initialize_child(obj, "usb[*]", &s->usb[i], TYPE_CHIPIDEA);
76     }
77 
78     object_initialize_child(obj, "wdt", &s->wdt, TYPE_IMX2_WDT);
79 }
80 
81 static void fsl_imx25_realize(DeviceState *dev, Error **errp)
82 {
83     FslIMX25State *s = FSL_IMX25(dev);
84     uint8_t i;
85 
86     if (!qdev_realize(DEVICE(&s->cpu), NULL, errp)) {
87         return;
88     }
89 
90     if (!sysbus_realize(SYS_BUS_DEVICE(&s->avic), errp)) {
91         return;
92     }
93     sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX25_AVIC_ADDR);
94     sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0,
95                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
96     sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1,
97                        qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
98 
99     if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) {
100         return;
101     }
102     sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX25_CCM_ADDR);
103 
104     /* Initialize all UARTs */
105     for (i = 0; i < FSL_IMX25_NUM_UARTS; i++) {
106         static const struct {
107             hwaddr addr;
108             unsigned int irq;
109         } serial_table[FSL_IMX25_NUM_UARTS] = {
110             { FSL_IMX25_UART1_ADDR, FSL_IMX25_UART1_IRQ },
111             { FSL_IMX25_UART2_ADDR, FSL_IMX25_UART2_IRQ },
112             { FSL_IMX25_UART3_ADDR, FSL_IMX25_UART3_IRQ },
113             { FSL_IMX25_UART4_ADDR, FSL_IMX25_UART4_IRQ },
114             { FSL_IMX25_UART5_ADDR, FSL_IMX25_UART5_IRQ }
115         };
116 
117         qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
118 
119         if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) {
120             return;
121         }
122         sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
123         sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
124                            qdev_get_gpio_in(DEVICE(&s->avic),
125                                             serial_table[i].irq));
126     }
127 
128     /* Initialize all GPT timers */
129     for (i = 0; i < FSL_IMX25_NUM_GPTS; i++) {
130         static const struct {
131             hwaddr addr;
132             unsigned int irq;
133         } gpt_table[FSL_IMX25_NUM_GPTS] = {
134             { FSL_IMX25_GPT1_ADDR, FSL_IMX25_GPT1_IRQ },
135             { FSL_IMX25_GPT2_ADDR, FSL_IMX25_GPT2_IRQ },
136             { FSL_IMX25_GPT3_ADDR, FSL_IMX25_GPT3_IRQ },
137             { FSL_IMX25_GPT4_ADDR, FSL_IMX25_GPT4_IRQ }
138         };
139 
140         s->gpt[i].ccm = IMX_CCM(&s->ccm);
141 
142         if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), errp)) {
143             return;
144         }
145         sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_table[i].addr);
146         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
147                            qdev_get_gpio_in(DEVICE(&s->avic),
148                                             gpt_table[i].irq));
149     }
150 
151     /* Initialize all EPIT timers */
152     for (i = 0; i < FSL_IMX25_NUM_EPITS; i++) {
153         static const struct {
154             hwaddr addr;
155             unsigned int irq;
156         } epit_table[FSL_IMX25_NUM_EPITS] = {
157             { FSL_IMX25_EPIT1_ADDR, FSL_IMX25_EPIT1_IRQ },
158             { FSL_IMX25_EPIT2_ADDR, FSL_IMX25_EPIT2_IRQ }
159         };
160 
161         s->epit[i].ccm = IMX_CCM(&s->ccm);
162 
163         if (!sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), errp)) {
164             return;
165         }
166         sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr);
167         sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
168                            qdev_get_gpio_in(DEVICE(&s->avic),
169                                             epit_table[i].irq));
170     }
171 
172     object_property_set_uint(OBJECT(&s->fec), "phy-num", s->phy_num,
173                              &error_abort);
174     qemu_configure_nic_device(DEVICE(&s->fec), true, NULL);
175 
176     if (!sysbus_realize(SYS_BUS_DEVICE(&s->fec), errp)) {
177         return;
178     }
179     sysbus_mmio_map(SYS_BUS_DEVICE(&s->fec), 0, FSL_IMX25_FEC_ADDR);
180     sysbus_connect_irq(SYS_BUS_DEVICE(&s->fec), 0,
181                        qdev_get_gpio_in(DEVICE(&s->avic), FSL_IMX25_FEC_IRQ));
182 
183     if (!sysbus_realize(SYS_BUS_DEVICE(&s->rngc), errp)) {
184         return;
185     }
186     sysbus_mmio_map(SYS_BUS_DEVICE(&s->rngc), 0, FSL_IMX25_RNGC_ADDR);
187     sysbus_connect_irq(SYS_BUS_DEVICE(&s->rngc), 0,
188                        qdev_get_gpio_in(DEVICE(&s->avic), FSL_IMX25_RNGC_IRQ));
189 
190     /* Initialize all I2C */
191     for (i = 0; i < FSL_IMX25_NUM_I2CS; i++) {
192         static const struct {
193             hwaddr addr;
194             unsigned int irq;
195         } i2c_table[FSL_IMX25_NUM_I2CS] = {
196             { FSL_IMX25_I2C1_ADDR, FSL_IMX25_I2C1_IRQ },
197             { FSL_IMX25_I2C2_ADDR, FSL_IMX25_I2C2_IRQ },
198             { FSL_IMX25_I2C3_ADDR, FSL_IMX25_I2C3_IRQ }
199         };
200 
201         if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) {
202             return;
203         }
204         sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
205         sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
206                            qdev_get_gpio_in(DEVICE(&s->avic),
207                                             i2c_table[i].irq));
208     }
209 
210     /* Initialize all GPIOs */
211     for (i = 0; i < FSL_IMX25_NUM_GPIOS; i++) {
212         static const struct {
213             hwaddr addr;
214             unsigned int irq;
215         } gpio_table[FSL_IMX25_NUM_GPIOS] = {
216             { FSL_IMX25_GPIO1_ADDR, FSL_IMX25_GPIO1_IRQ },
217             { FSL_IMX25_GPIO2_ADDR, FSL_IMX25_GPIO2_IRQ },
218             { FSL_IMX25_GPIO3_ADDR, FSL_IMX25_GPIO3_IRQ },
219             { FSL_IMX25_GPIO4_ADDR, FSL_IMX25_GPIO4_IRQ }
220         };
221 
222         if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
223             return;
224         }
225         sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
226         /* Connect GPIO IRQ to PIC */
227         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
228                            qdev_get_gpio_in(DEVICE(&s->avic),
229                                             gpio_table[i].irq));
230     }
231 
232     /* Initialize all SDHC */
233     for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) {
234         static const struct {
235             hwaddr addr;
236             unsigned int irq;
237         } esdhc_table[FSL_IMX25_NUM_ESDHCS] = {
238             { FSL_IMX25_ESDHC1_ADDR, FSL_IMX25_ESDHC1_IRQ },
239             { FSL_IMX25_ESDHC2_ADDR, FSL_IMX25_ESDHC2_IRQ },
240         };
241 
242         object_property_set_uint(OBJECT(&s->esdhc[i]), "sd-spec-version", 2,
243                                  &error_abort);
244         object_property_set_uint(OBJECT(&s->esdhc[i]), "capareg",
245                                  IMX25_ESDHC_CAPABILITIES, &error_abort);
246         object_property_set_uint(OBJECT(&s->esdhc[i]), "vendor",
247                                  SDHCI_VENDOR_IMX, &error_abort);
248         if (!sysbus_realize(SYS_BUS_DEVICE(&s->esdhc[i]), errp)) {
249             return;
250         }
251         sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr);
252         sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0,
253                            qdev_get_gpio_in(DEVICE(&s->avic),
254                                             esdhc_table[i].irq));
255     }
256 
257     /* USB */
258     for (i = 0; i < FSL_IMX25_NUM_USBS; i++) {
259         static const struct {
260             hwaddr addr;
261             unsigned int irq;
262         } usb_table[FSL_IMX25_NUM_USBS] = {
263             { FSL_IMX25_USB1_ADDR, FSL_IMX25_USB1_IRQ },
264             { FSL_IMX25_USB2_ADDR, FSL_IMX25_USB2_IRQ },
265         };
266 
267         sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort);
268         sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
269         sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0,
270                            qdev_get_gpio_in(DEVICE(&s->avic),
271                                             usb_table[i].irq));
272     }
273 
274     /* Watchdog */
275     object_property_set_bool(OBJECT(&s->wdt), "pretimeout-support", true,
276                              &error_abort);
277     sysbus_realize(SYS_BUS_DEVICE(&s->wdt), &error_abort);
278     sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX25_WDT_ADDR);
279     sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt), 0,
280                                       qdev_get_gpio_in(DEVICE(&s->avic),
281                                                        FSL_IMX25_WDT_IRQ));
282 
283     /* initialize 2 x 16 KB ROM */
284     if (!memory_region_init_rom(&s->rom[0], OBJECT(dev), "imx25.rom0",
285                                 FSL_IMX25_ROM0_SIZE, errp)) {
286         return;
287     }
288     memory_region_add_subregion(get_system_memory(), FSL_IMX25_ROM0_ADDR,
289                                 &s->rom[0]);
290     if (!memory_region_init_rom(&s->rom[1], OBJECT(dev), "imx25.rom1",
291                                 FSL_IMX25_ROM1_SIZE, errp)) {
292         return;
293     }
294     memory_region_add_subregion(get_system_memory(), FSL_IMX25_ROM1_ADDR,
295                                 &s->rom[1]);
296 
297     /* initialize internal RAM (128 KB) */
298     if (!memory_region_init_ram(&s->iram, NULL, "imx25.iram",
299                                 FSL_IMX25_IRAM_SIZE, errp)) {
300         return;
301     }
302     memory_region_add_subregion(get_system_memory(), FSL_IMX25_IRAM_ADDR,
303                                 &s->iram);
304 
305     /* internal RAM (128 KB) is aliased over 128 MB - 128 KB */
306     memory_region_init_alias(&s->iram_alias, OBJECT(dev), "imx25.iram_alias",
307                              &s->iram, 0, FSL_IMX25_IRAM_ALIAS_SIZE);
308     memory_region_add_subregion(get_system_memory(), FSL_IMX25_IRAM_ALIAS_ADDR,
309                                 &s->iram_alias);
310 }
311 
312 static Property fsl_imx25_properties[] = {
313     DEFINE_PROP_UINT32("fec-phy-num", FslIMX25State, phy_num, 0),
314     DEFINE_PROP_END_OF_LIST(),
315 };
316 
317 static void fsl_imx25_class_init(ObjectClass *oc, void *data)
318 {
319     DeviceClass *dc = DEVICE_CLASS(oc);
320 
321     device_class_set_props(dc, fsl_imx25_properties);
322     dc->realize = fsl_imx25_realize;
323     dc->desc = "i.MX25 SOC";
324     /*
325      * Reason: uses serial_hds in realize and the imx25 board does not
326      * support multiple CPUs
327      */
328     dc->user_creatable = false;
329 }
330 
331 static const TypeInfo fsl_imx25_type_info = {
332     .name = TYPE_FSL_IMX25,
333     .parent = TYPE_DEVICE,
334     .instance_size = sizeof(FslIMX25State),
335     .instance_init = fsl_imx25_init,
336     .class_init = fsl_imx25_class_init,
337 };
338 
339 static void fsl_imx25_register_types(void)
340 {
341     type_register_static(&fsl_imx25_type_info);
342 }
343 
344 type_init(fsl_imx25_register_types)
345