1 /* 2 * Samsung exynos4210 SoC emulation 3 * 4 * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved. 5 * Maksim Kozlov <m.kozlov@samsung.com> 6 * Evgeny Voevodin <e.voevodin@samsung.com> 7 * Igor Mitsyanko <i.mitsyanko@samsung.com> 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, but WITHOUT 15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 16 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 17 * for more details. 18 * 19 * You should have received a copy of the GNU General Public License along 20 * with this program; if not, see <http://www.gnu.org/licenses/>. 21 * 22 */ 23 24 #include "qemu/osdep.h" 25 #include "qapi/error.h" 26 #include "qemu/log.h" 27 #include "cpu.h" 28 #include "hw/cpu/a9mpcore.h" 29 #include "hw/irq.h" 30 #include "sysemu/blockdev.h" 31 #include "sysemu/sysemu.h" 32 #include "hw/sysbus.h" 33 #include "hw/arm/boot.h" 34 #include "hw/loader.h" 35 #include "hw/qdev-properties.h" 36 #include "hw/arm/exynos4210.h" 37 #include "hw/sd/sdhci.h" 38 #include "hw/usb/hcd-ehci.h" 39 40 #define EXYNOS4210_CHIPID_ADDR 0x10000000 41 42 /* PWM */ 43 #define EXYNOS4210_PWM_BASE_ADDR 0x139D0000 44 45 /* RTC */ 46 #define EXYNOS4210_RTC_BASE_ADDR 0x10070000 47 48 /* MCT */ 49 #define EXYNOS4210_MCT_BASE_ADDR 0x10050000 50 51 /* I2C */ 52 #define EXYNOS4210_I2C_SHIFT 0x00010000 53 #define EXYNOS4210_I2C_BASE_ADDR 0x13860000 54 /* Interrupt Group of External Interrupt Combiner for I2C */ 55 #define EXYNOS4210_I2C_INTG 27 56 #define EXYNOS4210_HDMI_INTG 16 57 58 /* UART's definitions */ 59 #define EXYNOS4210_UART0_BASE_ADDR 0x13800000 60 #define EXYNOS4210_UART1_BASE_ADDR 0x13810000 61 #define EXYNOS4210_UART2_BASE_ADDR 0x13820000 62 #define EXYNOS4210_UART3_BASE_ADDR 0x13830000 63 #define EXYNOS4210_UART0_FIFO_SIZE 256 64 #define EXYNOS4210_UART1_FIFO_SIZE 64 65 #define EXYNOS4210_UART2_FIFO_SIZE 16 66 #define EXYNOS4210_UART3_FIFO_SIZE 16 67 /* Interrupt Group of External Interrupt Combiner for UART */ 68 #define EXYNOS4210_UART_INT_GRP 26 69 70 /* External GIC */ 71 #define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000 72 #define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000 73 74 /* Combiner */ 75 #define EXYNOS4210_EXT_COMBINER_BASE_ADDR 0x10440000 76 #define EXYNOS4210_INT_COMBINER_BASE_ADDR 0x10448000 77 78 /* SD/MMC host controllers */ 79 #define EXYNOS4210_SDHCI_CAPABILITIES 0x05E80080 80 #define EXYNOS4210_SDHCI_BASE_ADDR 0x12510000 81 #define EXYNOS4210_SDHCI_ADDR(n) (EXYNOS4210_SDHCI_BASE_ADDR + \ 82 0x00010000 * (n)) 83 #define EXYNOS4210_SDHCI_NUMBER 4 84 85 /* PMU SFR base address */ 86 #define EXYNOS4210_PMU_BASE_ADDR 0x10020000 87 88 /* Clock controller SFR base address */ 89 #define EXYNOS4210_CLK_BASE_ADDR 0x10030000 90 91 /* PRNG/HASH SFR base address */ 92 #define EXYNOS4210_RNG_BASE_ADDR 0x10830400 93 94 /* Display controllers (FIMD) */ 95 #define EXYNOS4210_FIMD0_BASE_ADDR 0x11C00000 96 97 /* EHCI */ 98 #define EXYNOS4210_EHCI_BASE_ADDR 0x12580000 99 100 /* DMA */ 101 #define EXYNOS4210_PL330_BASE0_ADDR 0x12680000 102 #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 103 #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 104 105 static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 106 0x09, 0x00, 0x00, 0x00 }; 107 108 static uint64_t exynos4210_chipid_and_omr_read(void *opaque, hwaddr offset, 109 unsigned size) 110 { 111 assert(offset < sizeof(chipid_and_omr)); 112 return chipid_and_omr[offset]; 113 } 114 115 static void exynos4210_chipid_and_omr_write(void *opaque, hwaddr offset, 116 uint64_t value, unsigned size) 117 { 118 return; 119 } 120 121 static const MemoryRegionOps exynos4210_chipid_and_omr_ops = { 122 .read = exynos4210_chipid_and_omr_read, 123 .write = exynos4210_chipid_and_omr_write, 124 .endianness = DEVICE_NATIVE_ENDIAN, 125 .impl = { 126 .max_access_size = 1, 127 } 128 }; 129 130 void exynos4210_write_secondary(ARMCPU *cpu, 131 const struct arm_boot_info *info) 132 { 133 int n; 134 uint32_t smpboot[] = { 135 0xe59f3034, /* ldr r3, External gic_cpu_if */ 136 0xe59f2034, /* ldr r2, Internal gic_cpu_if */ 137 0xe59f0034, /* ldr r0, startaddr */ 138 0xe3a01001, /* mov r1, #1 */ 139 0xe5821000, /* str r1, [r2] */ 140 0xe5831000, /* str r1, [r3] */ 141 0xe3a010ff, /* mov r1, #0xff */ 142 0xe5821004, /* str r1, [r2, #4] */ 143 0xe5831004, /* str r1, [r3, #4] */ 144 0xf57ff04f, /* dsb */ 145 0xe320f003, /* wfi */ 146 0xe5901000, /* ldr r1, [r0] */ 147 0xe1110001, /* tst r1, r1 */ 148 0x0afffffb, /* beq <wfi> */ 149 0xe12fff11, /* bx r1 */ 150 EXYNOS4210_EXT_GIC_CPU_BASE_ADDR, 151 0, /* gic_cpu_if: base address of Internal GIC CPU interface */ 152 0 /* bootreg: Boot register address is held here */ 153 }; 154 smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr; 155 smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr; 156 for (n = 0; n < ARRAY_SIZE(smpboot); n++) { 157 smpboot[n] = tswap32(smpboot[n]); 158 } 159 rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), 160 info->smp_loader_start); 161 } 162 163 static uint64_t exynos4210_calc_affinity(int cpu) 164 { 165 /* Exynos4210 has 0x9 as cluster ID */ 166 return (0x9 << ARM_AFF1_SHIFT) | cpu; 167 } 168 169 static DeviceState *pl330_create(uint32_t base, qemu_or_irq *orgate, 170 qemu_irq irq, int nreq, int nevents, int width) 171 { 172 SysBusDevice *busdev; 173 DeviceState *dev; 174 int i; 175 176 dev = qdev_new("pl330"); 177 qdev_prop_set_uint8(dev, "num_events", nevents); 178 qdev_prop_set_uint8(dev, "num_chnls", 8); 179 qdev_prop_set_uint8(dev, "num_periph_req", nreq); 180 181 qdev_prop_set_uint8(dev, "wr_cap", 4); 182 qdev_prop_set_uint8(dev, "wr_q_dep", 8); 183 qdev_prop_set_uint8(dev, "rd_cap", 4); 184 qdev_prop_set_uint8(dev, "rd_q_dep", 8); 185 qdev_prop_set_uint8(dev, "data_width", width); 186 qdev_prop_set_uint16(dev, "data_buffer_dep", width); 187 busdev = SYS_BUS_DEVICE(dev); 188 sysbus_realize_and_unref(busdev, &error_fatal); 189 sysbus_mmio_map(busdev, 0, base); 190 191 object_property_set_int(OBJECT(orgate), "num-lines", nevents + 1, 192 &error_abort); 193 qdev_realize(DEVICE(orgate), NULL, &error_abort); 194 195 for (i = 0; i < nevents + 1; i++) { 196 sysbus_connect_irq(busdev, i, qdev_get_gpio_in(DEVICE(orgate), i)); 197 } 198 qdev_connect_gpio_out(DEVICE(orgate), 0, irq); 199 return dev; 200 } 201 202 static void exynos4210_realize(DeviceState *socdev, Error **errp) 203 { 204 Exynos4210State *s = EXYNOS4210_SOC(socdev); 205 MemoryRegion *system_mem = get_system_memory(); 206 qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; 207 SysBusDevice *busdev; 208 DeviceState *dev, *uart[4], *pl330[3]; 209 int i, n; 210 211 for (n = 0; n < EXYNOS4210_NCPUS; n++) { 212 Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9")); 213 214 /* By default A9 CPUs have EL3 enabled. This board does not currently 215 * support EL3 so the CPU EL3 property is disabled before realization. 216 */ 217 if (object_property_find(cpuobj, "has_el3", NULL)) { 218 object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); 219 } 220 221 s->cpu[n] = ARM_CPU(cpuobj); 222 object_property_set_int(cpuobj, "mp-affinity", 223 exynos4210_calc_affinity(n), &error_abort); 224 object_property_set_int(cpuobj, "reset-cbar", 225 EXYNOS4210_SMP_PRIVATE_BASE_ADDR, 226 &error_abort); 227 qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); 228 } 229 230 /*** IRQs ***/ 231 232 s->irq_table = exynos4210_init_irq(&s->irqs); 233 234 /* IRQ Gate */ 235 for (i = 0; i < EXYNOS4210_NCPUS; i++) { 236 dev = qdev_new("exynos4210.irq_gate"); 237 qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS); 238 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 239 /* Get IRQ Gate input in gate_irq */ 240 for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) { 241 gate_irq[i][n] = qdev_get_gpio_in(dev, n); 242 } 243 busdev = SYS_BUS_DEVICE(dev); 244 245 /* Connect IRQ Gate output to CPU's IRQ line */ 246 sysbus_connect_irq(busdev, 0, 247 qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); 248 } 249 250 /* Private memory region and Internal GIC */ 251 dev = qdev_new(TYPE_A9MPCORE_PRIV); 252 qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); 253 busdev = SYS_BUS_DEVICE(dev); 254 sysbus_realize_and_unref(busdev, &error_fatal); 255 sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); 256 for (n = 0; n < EXYNOS4210_NCPUS; n++) { 257 sysbus_connect_irq(busdev, n, gate_irq[n][0]); 258 } 259 for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { 260 s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); 261 } 262 263 /* Cache controller */ 264 sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); 265 266 /* External GIC */ 267 dev = qdev_new("exynos4210.gic"); 268 qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); 269 busdev = SYS_BUS_DEVICE(dev); 270 sysbus_realize_and_unref(busdev, &error_fatal); 271 /* Map CPU interface */ 272 sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR); 273 /* Map Distributer interface */ 274 sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR); 275 for (n = 0; n < EXYNOS4210_NCPUS; n++) { 276 sysbus_connect_irq(busdev, n, gate_irq[n][1]); 277 } 278 for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { 279 s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); 280 } 281 282 /* Internal Interrupt Combiner */ 283 dev = qdev_new("exynos4210.combiner"); 284 busdev = SYS_BUS_DEVICE(dev); 285 sysbus_realize_and_unref(busdev, &error_fatal); 286 for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { 287 sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]); 288 } 289 exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); 290 sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); 291 292 /* External Interrupt Combiner */ 293 dev = qdev_new("exynos4210.combiner"); 294 qdev_prop_set_uint32(dev, "external", 1); 295 busdev = SYS_BUS_DEVICE(dev); 296 sysbus_realize_and_unref(busdev, &error_fatal); 297 for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { 298 sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]); 299 } 300 exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); 301 sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); 302 303 /* Initialize board IRQs. */ 304 exynos4210_init_board_irqs(&s->irqs); 305 306 /*** Memory ***/ 307 308 /* Chip-ID and OMR */ 309 memory_region_init_io(&s->chipid_mem, OBJECT(socdev), 310 &exynos4210_chipid_and_omr_ops, NULL, 311 "exynos4210.chipid", sizeof(chipid_and_omr)); 312 memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR, 313 &s->chipid_mem); 314 315 /* Internal ROM */ 316 memory_region_init_rom(&s->irom_mem, OBJECT(socdev), "exynos4210.irom", 317 EXYNOS4210_IROM_SIZE, &error_fatal); 318 memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR, 319 &s->irom_mem); 320 /* mirror of iROM */ 321 memory_region_init_alias(&s->irom_alias_mem, OBJECT(socdev), 322 "exynos4210.irom_alias", &s->irom_mem, 0, 323 EXYNOS4210_IROM_SIZE); 324 memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR, 325 &s->irom_alias_mem); 326 327 /* Internal RAM */ 328 memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram", 329 EXYNOS4210_IRAM_SIZE, &error_fatal); 330 memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR, 331 &s->iram_mem); 332 333 /* PMU. 334 * The only reason of existence at the moment is that secondary CPU boot 335 * loader uses PMU INFORM5 register as a holding pen. 336 */ 337 sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL); 338 339 sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL); 340 sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL); 341 342 /* PWM */ 343 sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR, 344 s->irq_table[exynos4210_get_irq(22, 0)], 345 s->irq_table[exynos4210_get_irq(22, 1)], 346 s->irq_table[exynos4210_get_irq(22, 2)], 347 s->irq_table[exynos4210_get_irq(22, 3)], 348 s->irq_table[exynos4210_get_irq(22, 4)], 349 NULL); 350 /* RTC */ 351 sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR, 352 s->irq_table[exynos4210_get_irq(23, 0)], 353 s->irq_table[exynos4210_get_irq(23, 1)], 354 NULL); 355 356 /* Multi Core Timer */ 357 dev = qdev_new("exynos4210.mct"); 358 busdev = SYS_BUS_DEVICE(dev); 359 sysbus_realize_and_unref(busdev, &error_fatal); 360 for (n = 0; n < 4; n++) { 361 /* Connect global timer interrupts to Combiner gpio_in */ 362 sysbus_connect_irq(busdev, n, 363 s->irq_table[exynos4210_get_irq(1, 4 + n)]); 364 } 365 /* Connect local timer interrupts to Combiner gpio_in */ 366 sysbus_connect_irq(busdev, 4, 367 s->irq_table[exynos4210_get_irq(51, 0)]); 368 sysbus_connect_irq(busdev, 5, 369 s->irq_table[exynos4210_get_irq(35, 3)]); 370 sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR); 371 372 /*** I2C ***/ 373 for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) { 374 uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n; 375 qemu_irq i2c_irq; 376 377 if (n < 8) { 378 i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)]; 379 } else { 380 i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)]; 381 } 382 383 dev = qdev_new("exynos4210.i2c"); 384 busdev = SYS_BUS_DEVICE(dev); 385 sysbus_realize_and_unref(busdev, &error_fatal); 386 sysbus_connect_irq(busdev, 0, i2c_irq); 387 sysbus_mmio_map(busdev, 0, addr); 388 s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 389 } 390 391 392 /*** UARTs ***/ 393 uart[0] = exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR, 394 EXYNOS4210_UART0_FIFO_SIZE, 0, serial_hd(0), 395 s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]); 396 397 uart[1] = exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR, 398 EXYNOS4210_UART1_FIFO_SIZE, 1, serial_hd(1), 399 s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]); 400 401 uart[2] = exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR, 402 EXYNOS4210_UART2_FIFO_SIZE, 2, serial_hd(2), 403 s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]); 404 405 uart[3] = exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR, 406 EXYNOS4210_UART3_FIFO_SIZE, 3, serial_hd(3), 407 s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]); 408 409 /*** SD/MMC host controllers ***/ 410 for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) { 411 DeviceState *carddev; 412 BlockBackend *blk; 413 DriveInfo *di; 414 415 /* Compatible with: 416 * - SD Host Controller Specification Version 2.0 417 * - SDIO Specification Version 2.0 418 * - MMC Specification Version 4.3 419 * - SDMA 420 * - ADMA2 421 * 422 * As this part of the Exynos4210 is not publically available, 423 * we used the "HS-MMC Controller S3C2416X RISC Microprocessor" 424 * public datasheet which is very similar (implementing 425 * MMC Specification Version 4.0 being the only difference noted) 426 */ 427 dev = qdev_new(TYPE_S3C_SDHCI); 428 qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES); 429 430 busdev = SYS_BUS_DEVICE(dev); 431 sysbus_realize_and_unref(busdev, &error_fatal); 432 sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n)); 433 sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]); 434 435 di = drive_get(IF_SD, 0, n); 436 blk = di ? blk_by_legacy_dinfo(di) : NULL; 437 carddev = qdev_new(TYPE_SD_CARD); 438 qdev_prop_set_drive(carddev, "drive", blk); 439 qdev_realize_and_unref(carddev, qdev_get_child_bus(dev, "sd-bus"), 440 &error_fatal); 441 } 442 443 /*** Display controller (FIMD) ***/ 444 sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR, 445 s->irq_table[exynos4210_get_irq(11, 0)], 446 s->irq_table[exynos4210_get_irq(11, 1)], 447 s->irq_table[exynos4210_get_irq(11, 2)], 448 NULL); 449 450 sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR, 451 s->irq_table[exynos4210_get_irq(28, 3)]); 452 453 /*** DMA controllers ***/ 454 pl330[0] = pl330_create(EXYNOS4210_PL330_BASE0_ADDR, 455 &s->pl330_irq_orgate[0], 456 s->irq_table[exynos4210_get_irq(21, 0)], 457 32, 32, 32); 458 pl330[1] = pl330_create(EXYNOS4210_PL330_BASE1_ADDR, 459 &s->pl330_irq_orgate[1], 460 s->irq_table[exynos4210_get_irq(21, 1)], 461 32, 32, 32); 462 pl330[2] = pl330_create(EXYNOS4210_PL330_BASE2_ADDR, 463 &s->pl330_irq_orgate[2], 464 s->irq_table[exynos4210_get_irq(20, 1)], 465 1, 31, 64); 466 467 sysbus_connect_irq(SYS_BUS_DEVICE(uart[0]), 1, 468 qdev_get_gpio_in(pl330[0], 15)); 469 sysbus_connect_irq(SYS_BUS_DEVICE(uart[1]), 1, 470 qdev_get_gpio_in(pl330[1], 15)); 471 sysbus_connect_irq(SYS_BUS_DEVICE(uart[2]), 1, 472 qdev_get_gpio_in(pl330[0], 17)); 473 sysbus_connect_irq(SYS_BUS_DEVICE(uart[3]), 1, 474 qdev_get_gpio_in(pl330[1], 17)); 475 } 476 477 static void exynos4210_init(Object *obj) 478 { 479 Exynos4210State *s = EXYNOS4210_SOC(obj); 480 int i; 481 482 for (i = 0; i < ARRAY_SIZE(s->pl330_irq_orgate); i++) { 483 char *name = g_strdup_printf("pl330-irq-orgate%d", i); 484 qemu_or_irq *orgate = &s->pl330_irq_orgate[i]; 485 486 object_initialize_child(obj, name, orgate, TYPE_OR_IRQ); 487 g_free(name); 488 } 489 } 490 491 static void exynos4210_class_init(ObjectClass *klass, void *data) 492 { 493 DeviceClass *dc = DEVICE_CLASS(klass); 494 495 dc->realize = exynos4210_realize; 496 } 497 498 static const TypeInfo exynos4210_info = { 499 .name = TYPE_EXYNOS4210_SOC, 500 .parent = TYPE_SYS_BUS_DEVICE, 501 .instance_size = sizeof(Exynos4210State), 502 .instance_init = exynos4210_init, 503 .class_init = exynos4210_class_init, 504 }; 505 506 static void exynos4210_register_types(void) 507 { 508 type_register_static(&exynos4210_info); 509 } 510 511 type_init(exynos4210_register_types) 512