1 /* 2 * ARM kernel loader. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qemu-common.h" 12 #include "qemu/datadir.h" 13 #include "qemu/error-report.h" 14 #include "qapi/error.h" 15 #include <libfdt.h> 16 #include "hw/arm/boot.h" 17 #include "hw/arm/linux-boot-if.h" 18 #include "sysemu/kvm.h" 19 #include "sysemu/sysemu.h" 20 #include "sysemu/numa.h" 21 #include "hw/boards.h" 22 #include "sysemu/reset.h" 23 #include "hw/loader.h" 24 #include "elf.h" 25 #include "sysemu/device_tree.h" 26 #include "qemu/config-file.h" 27 #include "qemu/option.h" 28 #include "exec/address-spaces.h" 29 #include "qemu/units.h" 30 31 /* Kernel boot protocol is specified in the kernel docs 32 * Documentation/arm/Booting and Documentation/arm64/booting.txt 33 * They have different preferred image load offsets from system RAM base. 34 */ 35 #define KERNEL_ARGS_ADDR 0x100 36 #define KERNEL_NOLOAD_ADDR 0x02000000 37 #define KERNEL_LOAD_ADDR 0x00010000 38 #define KERNEL64_LOAD_ADDR 0x00080000 39 40 #define ARM64_TEXT_OFFSET_OFFSET 8 41 #define ARM64_MAGIC_OFFSET 56 42 43 #define BOOTLOADER_MAX_SIZE (4 * KiB) 44 45 AddressSpace *arm_boot_address_space(ARMCPU *cpu, 46 const struct arm_boot_info *info) 47 { 48 /* Return the address space to use for bootloader reads and writes. 49 * We prefer the secure address space if the CPU has it and we're 50 * going to boot the guest into it. 51 */ 52 int asidx; 53 CPUState *cs = CPU(cpu); 54 55 if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { 56 asidx = ARMASIdx_S; 57 } else { 58 asidx = ARMASIdx_NS; 59 } 60 61 return cpu_get_address_space(cs, asidx); 62 } 63 64 typedef enum { 65 FIXUP_NONE = 0, /* do nothing */ 66 FIXUP_TERMINATOR, /* end of insns */ 67 FIXUP_BOARDID, /* overwrite with board ID number */ 68 FIXUP_BOARD_SETUP, /* overwrite with board specific setup code address */ 69 FIXUP_ARGPTR_LO, /* overwrite with pointer to kernel args */ 70 FIXUP_ARGPTR_HI, /* overwrite with pointer to kernel args (high half) */ 71 FIXUP_ENTRYPOINT_LO, /* overwrite with kernel entry point */ 72 FIXUP_ENTRYPOINT_HI, /* overwrite with kernel entry point (high half) */ 73 FIXUP_GIC_CPU_IF, /* overwrite with GIC CPU interface address */ 74 FIXUP_BOOTREG, /* overwrite with boot register address */ 75 FIXUP_DSB, /* overwrite with correct DSB insn for cpu */ 76 FIXUP_MAX, 77 } FixupType; 78 79 typedef struct ARMInsnFixup { 80 uint32_t insn; 81 FixupType fixup; 82 } ARMInsnFixup; 83 84 static const ARMInsnFixup bootloader_aarch64[] = { 85 { 0x580000c0 }, /* ldr x0, arg ; Load the lower 32-bits of DTB */ 86 { 0xaa1f03e1 }, /* mov x1, xzr */ 87 { 0xaa1f03e2 }, /* mov x2, xzr */ 88 { 0xaa1f03e3 }, /* mov x3, xzr */ 89 { 0x58000084 }, /* ldr x4, entry ; Load the lower 32-bits of kernel entry */ 90 { 0xd61f0080 }, /* br x4 ; Jump to the kernel entry point */ 91 { 0, FIXUP_ARGPTR_LO }, /* arg: .word @DTB Lower 32-bits */ 92 { 0, FIXUP_ARGPTR_HI}, /* .word @DTB Higher 32-bits */ 93 { 0, FIXUP_ENTRYPOINT_LO }, /* entry: .word @Kernel Entry Lower 32-bits */ 94 { 0, FIXUP_ENTRYPOINT_HI }, /* .word @Kernel Entry Higher 32-bits */ 95 { 0, FIXUP_TERMINATOR } 96 }; 97 98 /* A very small bootloader: call the board-setup code (if needed), 99 * set r0-r2, then jump to the kernel. 100 * If we're not calling boot setup code then we don't copy across 101 * the first BOOTLOADER_NO_BOARD_SETUP_OFFSET insns in this array. 102 */ 103 104 static const ARMInsnFixup bootloader[] = { 105 { 0xe28fe004 }, /* add lr, pc, #4 */ 106 { 0xe51ff004 }, /* ldr pc, [pc, #-4] */ 107 { 0, FIXUP_BOARD_SETUP }, 108 #define BOOTLOADER_NO_BOARD_SETUP_OFFSET 3 109 { 0xe3a00000 }, /* mov r0, #0 */ 110 { 0xe59f1004 }, /* ldr r1, [pc, #4] */ 111 { 0xe59f2004 }, /* ldr r2, [pc, #4] */ 112 { 0xe59ff004 }, /* ldr pc, [pc, #4] */ 113 { 0, FIXUP_BOARDID }, 114 { 0, FIXUP_ARGPTR_LO }, 115 { 0, FIXUP_ENTRYPOINT_LO }, 116 { 0, FIXUP_TERMINATOR } 117 }; 118 119 /* Handling for secondary CPU boot in a multicore system. 120 * Unlike the uniprocessor/primary CPU boot, this is platform 121 * dependent. The default code here is based on the secondary 122 * CPU boot protocol used on realview/vexpress boards, with 123 * some parameterisation to increase its flexibility. 124 * QEMU platform models for which this code is not appropriate 125 * should override write_secondary_boot and secondary_cpu_reset_hook 126 * instead. 127 * 128 * This code enables the interrupt controllers for the secondary 129 * CPUs and then puts all the secondary CPUs into a loop waiting 130 * for an interprocessor interrupt and polling a configurable 131 * location for the kernel secondary CPU entry point. 132 */ 133 #define DSB_INSN 0xf57ff04f 134 #define CP15_DSB_INSN 0xee070f9a /* mcr cp15, 0, r0, c7, c10, 4 */ 135 136 static const ARMInsnFixup smpboot[] = { 137 { 0xe59f2028 }, /* ldr r2, gic_cpu_if */ 138 { 0xe59f0028 }, /* ldr r0, bootreg_addr */ 139 { 0xe3a01001 }, /* mov r1, #1 */ 140 { 0xe5821000 }, /* str r1, [r2] - set GICC_CTLR.Enable */ 141 { 0xe3a010ff }, /* mov r1, #0xff */ 142 { 0xe5821004 }, /* str r1, [r2, 4] - set GIC_PMR.Priority to 0xff */ 143 { 0, FIXUP_DSB }, /* dsb */ 144 { 0xe320f003 }, /* wfi */ 145 { 0xe5901000 }, /* ldr r1, [r0] */ 146 { 0xe1110001 }, /* tst r1, r1 */ 147 { 0x0afffffb }, /* beq <wfi> */ 148 { 0xe12fff11 }, /* bx r1 */ 149 { 0, FIXUP_GIC_CPU_IF }, /* gic_cpu_if: .word 0x.... */ 150 { 0, FIXUP_BOOTREG }, /* bootreg_addr: .word 0x.... */ 151 { 0, FIXUP_TERMINATOR } 152 }; 153 154 static void write_bootloader(const char *name, hwaddr addr, 155 const ARMInsnFixup *insns, uint32_t *fixupcontext, 156 AddressSpace *as) 157 { 158 /* Fix up the specified bootloader fragment and write it into 159 * guest memory using rom_add_blob_fixed(). fixupcontext is 160 * an array giving the values to write in for the fixup types 161 * which write a value into the code array. 162 */ 163 int i, len; 164 uint32_t *code; 165 166 len = 0; 167 while (insns[len].fixup != FIXUP_TERMINATOR) { 168 len++; 169 } 170 171 code = g_new0(uint32_t, len); 172 173 for (i = 0; i < len; i++) { 174 uint32_t insn = insns[i].insn; 175 FixupType fixup = insns[i].fixup; 176 177 switch (fixup) { 178 case FIXUP_NONE: 179 break; 180 case FIXUP_BOARDID: 181 case FIXUP_BOARD_SETUP: 182 case FIXUP_ARGPTR_LO: 183 case FIXUP_ARGPTR_HI: 184 case FIXUP_ENTRYPOINT_LO: 185 case FIXUP_ENTRYPOINT_HI: 186 case FIXUP_GIC_CPU_IF: 187 case FIXUP_BOOTREG: 188 case FIXUP_DSB: 189 insn = fixupcontext[fixup]; 190 break; 191 default: 192 abort(); 193 } 194 code[i] = tswap32(insn); 195 } 196 197 assert((len * sizeof(uint32_t)) < BOOTLOADER_MAX_SIZE); 198 199 rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); 200 201 g_free(code); 202 } 203 204 static void default_write_secondary(ARMCPU *cpu, 205 const struct arm_boot_info *info) 206 { 207 uint32_t fixupcontext[FIXUP_MAX]; 208 AddressSpace *as = arm_boot_address_space(cpu, info); 209 210 fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; 211 fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; 212 if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { 213 fixupcontext[FIXUP_DSB] = DSB_INSN; 214 } else { 215 fixupcontext[FIXUP_DSB] = CP15_DSB_INSN; 216 } 217 218 write_bootloader("smpboot", info->smp_loader_start, 219 smpboot, fixupcontext, as); 220 } 221 222 void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, 223 const struct arm_boot_info *info, 224 hwaddr mvbar_addr) 225 { 226 AddressSpace *as = arm_boot_address_space(cpu, info); 227 int n; 228 uint32_t mvbar_blob[] = { 229 /* mvbar_addr: secure monitor vectors 230 * Default unimplemented and unused vectors to spin. Makes it 231 * easier to debug (as opposed to the CPU running away). 232 */ 233 0xeafffffe, /* (spin) */ 234 0xeafffffe, /* (spin) */ 235 0xe1b0f00e, /* movs pc, lr ;SMC exception return */ 236 0xeafffffe, /* (spin) */ 237 0xeafffffe, /* (spin) */ 238 0xeafffffe, /* (spin) */ 239 0xeafffffe, /* (spin) */ 240 0xeafffffe, /* (spin) */ 241 }; 242 uint32_t board_setup_blob[] = { 243 /* board setup addr */ 244 0xee110f51, /* mrc p15, 0, r0, c1, c1, 2 ;read NSACR */ 245 0xe3800b03, /* orr r0, #0xc00 ;set CP11, CP10 */ 246 0xee010f51, /* mcr p15, 0, r0, c1, c1, 2 ;write NSACR */ 247 0xe3a00e00 + (mvbar_addr >> 4), /* mov r0, #mvbar_addr */ 248 0xee0c0f30, /* mcr p15, 0, r0, c12, c0, 1 ;set MVBAR */ 249 0xee110f11, /* mrc p15, 0, r0, c1 , c1, 0 ;read SCR */ 250 0xe3800031, /* orr r0, #0x31 ;enable AW, FW, NS */ 251 0xee010f11, /* mcr p15, 0, r0, c1, c1, 0 ;write SCR */ 252 0xe1a0100e, /* mov r1, lr ;save LR across SMC */ 253 0xe1600070, /* smc #0 ;call monitor to flush SCR */ 254 0xe1a0f001, /* mov pc, r1 ;return */ 255 }; 256 257 /* check that mvbar_addr is correctly aligned and relocatable (using MOV) */ 258 assert((mvbar_addr & 0x1f) == 0 && (mvbar_addr >> 4) < 0x100); 259 260 /* check that these blobs don't overlap */ 261 assert((mvbar_addr + sizeof(mvbar_blob) <= info->board_setup_addr) 262 || (info->board_setup_addr + sizeof(board_setup_blob) <= mvbar_addr)); 263 264 for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { 265 mvbar_blob[n] = tswap32(mvbar_blob[n]); 266 } 267 rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), 268 mvbar_addr, as); 269 270 for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { 271 board_setup_blob[n] = tswap32(board_setup_blob[n]); 272 } 273 rom_add_blob_fixed_as("board-setup", board_setup_blob, 274 sizeof(board_setup_blob), info->board_setup_addr, as); 275 } 276 277 static void default_reset_secondary(ARMCPU *cpu, 278 const struct arm_boot_info *info) 279 { 280 AddressSpace *as = arm_boot_address_space(cpu, info); 281 CPUState *cs = CPU(cpu); 282 283 address_space_stl_notdirty(as, info->smp_bootreg_addr, 284 0, MEMTXATTRS_UNSPECIFIED, NULL); 285 cpu_set_pc(cs, info->smp_loader_start); 286 } 287 288 static inline bool have_dtb(const struct arm_boot_info *info) 289 { 290 return info->dtb_filename || info->get_dtb; 291 } 292 293 #define WRITE_WORD(p, value) do { \ 294 address_space_stl_notdirty(as, p, value, \ 295 MEMTXATTRS_UNSPECIFIED, NULL); \ 296 p += 4; \ 297 } while (0) 298 299 static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) 300 { 301 int initrd_size = info->initrd_size; 302 hwaddr base = info->loader_start; 303 hwaddr p; 304 305 p = base + KERNEL_ARGS_ADDR; 306 /* ATAG_CORE */ 307 WRITE_WORD(p, 5); 308 WRITE_WORD(p, 0x54410001); 309 WRITE_WORD(p, 1); 310 WRITE_WORD(p, 0x1000); 311 WRITE_WORD(p, 0); 312 /* ATAG_MEM */ 313 /* TODO: handle multiple chips on one ATAG list */ 314 WRITE_WORD(p, 4); 315 WRITE_WORD(p, 0x54410002); 316 WRITE_WORD(p, info->ram_size); 317 WRITE_WORD(p, info->loader_start); 318 if (initrd_size) { 319 /* ATAG_INITRD2 */ 320 WRITE_WORD(p, 4); 321 WRITE_WORD(p, 0x54420005); 322 WRITE_WORD(p, info->initrd_start); 323 WRITE_WORD(p, initrd_size); 324 } 325 if (info->kernel_cmdline && *info->kernel_cmdline) { 326 /* ATAG_CMDLINE */ 327 int cmdline_size; 328 329 cmdline_size = strlen(info->kernel_cmdline); 330 address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, 331 info->kernel_cmdline, cmdline_size + 1); 332 cmdline_size = (cmdline_size >> 2) + 1; 333 WRITE_WORD(p, cmdline_size + 2); 334 WRITE_WORD(p, 0x54410009); 335 p += cmdline_size * 4; 336 } 337 if (info->atag_board) { 338 /* ATAG_BOARD */ 339 int atag_board_len; 340 uint8_t atag_board_buf[0x1000]; 341 342 atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; 343 WRITE_WORD(p, (atag_board_len + 8) >> 2); 344 WRITE_WORD(p, 0x414f4d50); 345 address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, 346 atag_board_buf, atag_board_len); 347 p += atag_board_len; 348 } 349 /* ATAG_END */ 350 WRITE_WORD(p, 0); 351 WRITE_WORD(p, 0); 352 } 353 354 static void set_kernel_args_old(const struct arm_boot_info *info, 355 AddressSpace *as) 356 { 357 hwaddr p; 358 const char *s; 359 int initrd_size = info->initrd_size; 360 hwaddr base = info->loader_start; 361 362 /* see linux/include/asm-arm/setup.h */ 363 p = base + KERNEL_ARGS_ADDR; 364 /* page_size */ 365 WRITE_WORD(p, 4096); 366 /* nr_pages */ 367 WRITE_WORD(p, info->ram_size / 4096); 368 /* ramdisk_size */ 369 WRITE_WORD(p, 0); 370 #define FLAG_READONLY 1 371 #define FLAG_RDLOAD 4 372 #define FLAG_RDPROMPT 8 373 /* flags */ 374 WRITE_WORD(p, FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT); 375 /* rootdev */ 376 WRITE_WORD(p, (31 << 8) | 0); /* /dev/mtdblock0 */ 377 /* video_num_cols */ 378 WRITE_WORD(p, 0); 379 /* video_num_rows */ 380 WRITE_WORD(p, 0); 381 /* video_x */ 382 WRITE_WORD(p, 0); 383 /* video_y */ 384 WRITE_WORD(p, 0); 385 /* memc_control_reg */ 386 WRITE_WORD(p, 0); 387 /* unsigned char sounddefault */ 388 /* unsigned char adfsdrives */ 389 /* unsigned char bytes_per_char_h */ 390 /* unsigned char bytes_per_char_v */ 391 WRITE_WORD(p, 0); 392 /* pages_in_bank[4] */ 393 WRITE_WORD(p, 0); 394 WRITE_WORD(p, 0); 395 WRITE_WORD(p, 0); 396 WRITE_WORD(p, 0); 397 /* pages_in_vram */ 398 WRITE_WORD(p, 0); 399 /* initrd_start */ 400 if (initrd_size) { 401 WRITE_WORD(p, info->initrd_start); 402 } else { 403 WRITE_WORD(p, 0); 404 } 405 /* initrd_size */ 406 WRITE_WORD(p, initrd_size); 407 /* rd_start */ 408 WRITE_WORD(p, 0); 409 /* system_rev */ 410 WRITE_WORD(p, 0); 411 /* system_serial_low */ 412 WRITE_WORD(p, 0); 413 /* system_serial_high */ 414 WRITE_WORD(p, 0); 415 /* mem_fclk_21285 */ 416 WRITE_WORD(p, 0); 417 /* zero unused fields */ 418 while (p < base + KERNEL_ARGS_ADDR + 256 + 1024) { 419 WRITE_WORD(p, 0); 420 } 421 s = info->kernel_cmdline; 422 if (s) { 423 address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, s, strlen(s) + 1); 424 } else { 425 WRITE_WORD(p, 0); 426 } 427 } 428 429 static int fdt_add_memory_node(void *fdt, uint32_t acells, hwaddr mem_base, 430 uint32_t scells, hwaddr mem_len, 431 int numa_node_id) 432 { 433 char *nodename; 434 int ret; 435 436 nodename = g_strdup_printf("/memory@%" PRIx64, mem_base); 437 qemu_fdt_add_subnode(fdt, nodename); 438 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 439 ret = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", acells, mem_base, 440 scells, mem_len); 441 if (ret < 0) { 442 goto out; 443 } 444 445 /* only set the NUMA ID if it is specified */ 446 if (numa_node_id >= 0) { 447 ret = qemu_fdt_setprop_cell(fdt, nodename, 448 "numa-node-id", numa_node_id); 449 } 450 out: 451 g_free(nodename); 452 return ret; 453 } 454 455 static void fdt_add_psci_node(void *fdt) 456 { 457 uint32_t cpu_suspend_fn; 458 uint32_t cpu_off_fn; 459 uint32_t cpu_on_fn; 460 uint32_t migrate_fn; 461 ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); 462 const char *psci_method; 463 int64_t psci_conduit; 464 int rc; 465 466 psci_conduit = object_property_get_int(OBJECT(armcpu), 467 "psci-conduit", 468 &error_abort); 469 switch (psci_conduit) { 470 case QEMU_PSCI_CONDUIT_DISABLED: 471 return; 472 case QEMU_PSCI_CONDUIT_HVC: 473 psci_method = "hvc"; 474 break; 475 case QEMU_PSCI_CONDUIT_SMC: 476 psci_method = "smc"; 477 break; 478 default: 479 g_assert_not_reached(); 480 } 481 482 /* 483 * If /psci node is present in provided DTB, assume that no fixup 484 * is necessary and all PSCI configuration should be taken as-is 485 */ 486 rc = fdt_path_offset(fdt, "/psci"); 487 if (rc >= 0) { 488 return; 489 } 490 491 qemu_fdt_add_subnode(fdt, "/psci"); 492 if (armcpu->psci_version == 2) { 493 const char comp[] = "arm,psci-0.2\0arm,psci"; 494 qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); 495 496 cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; 497 if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { 498 cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; 499 cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; 500 migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; 501 } else { 502 cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; 503 cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; 504 migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; 505 } 506 } else { 507 qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); 508 509 cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; 510 cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; 511 cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; 512 migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; 513 } 514 515 /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer 516 * to the instruction that should be used to invoke PSCI functions. 517 * However, the device tree binding uses 'method' instead, so that is 518 * what we should use here. 519 */ 520 qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); 521 522 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); 523 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); 524 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); 525 qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); 526 } 527 528 int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, 529 hwaddr addr_limit, AddressSpace *as, MachineState *ms) 530 { 531 void *fdt = NULL; 532 int size, rc, n = 0; 533 uint32_t acells, scells; 534 unsigned int i; 535 hwaddr mem_base, mem_len; 536 char **node_path; 537 Error *err = NULL; 538 539 if (binfo->dtb_filename) { 540 char *filename; 541 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename); 542 if (!filename) { 543 fprintf(stderr, "Couldn't open dtb file %s\n", binfo->dtb_filename); 544 goto fail; 545 } 546 547 fdt = load_device_tree(filename, &size); 548 if (!fdt) { 549 fprintf(stderr, "Couldn't open dtb file %s\n", filename); 550 g_free(filename); 551 goto fail; 552 } 553 g_free(filename); 554 } else { 555 fdt = binfo->get_dtb(binfo, &size); 556 if (!fdt) { 557 fprintf(stderr, "Board was unable to create a dtb blob\n"); 558 goto fail; 559 } 560 } 561 562 if (addr_limit > addr && size > (addr_limit - addr)) { 563 /* Installing the device tree blob at addr would exceed addr_limit. 564 * Whether this constitutes failure is up to the caller to decide, 565 * so just return 0 as size, i.e., no error. 566 */ 567 g_free(fdt); 568 return 0; 569 } 570 571 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells", 572 NULL, &error_fatal); 573 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells", 574 NULL, &error_fatal); 575 if (acells == 0 || scells == 0) { 576 fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n"); 577 goto fail; 578 } 579 580 if (scells < 2 && binfo->ram_size >= 4 * GiB) { 581 /* This is user error so deserves a friendlier error message 582 * than the failure of setprop_sized_cells would provide 583 */ 584 fprintf(stderr, "qemu: dtb file not compatible with " 585 "RAM size > 4GB\n"); 586 goto fail; 587 } 588 589 /* nop all root nodes matching /memory or /memory@unit-address */ 590 node_path = qemu_fdt_node_unit_path(fdt, "memory", &err); 591 if (err) { 592 error_report_err(err); 593 goto fail; 594 } 595 while (node_path[n]) { 596 if (g_str_has_prefix(node_path[n], "/memory")) { 597 qemu_fdt_nop_node(fdt, node_path[n]); 598 } 599 n++; 600 } 601 g_strfreev(node_path); 602 603 if (ms->numa_state != NULL && ms->numa_state->num_nodes > 0) { 604 mem_base = binfo->loader_start; 605 for (i = 0; i < ms->numa_state->num_nodes; i++) { 606 mem_len = ms->numa_state->nodes[i].node_mem; 607 rc = fdt_add_memory_node(fdt, acells, mem_base, 608 scells, mem_len, i); 609 if (rc < 0) { 610 fprintf(stderr, "couldn't add /memory@%"PRIx64" node\n", 611 mem_base); 612 goto fail; 613 } 614 615 mem_base += mem_len; 616 } 617 } else { 618 rc = fdt_add_memory_node(fdt, acells, binfo->loader_start, 619 scells, binfo->ram_size, -1); 620 if (rc < 0) { 621 fprintf(stderr, "couldn't add /memory@%"PRIx64" node\n", 622 binfo->loader_start); 623 goto fail; 624 } 625 } 626 627 rc = fdt_path_offset(fdt, "/chosen"); 628 if (rc < 0) { 629 qemu_fdt_add_subnode(fdt, "/chosen"); 630 } 631 632 if (ms->kernel_cmdline && *ms->kernel_cmdline) { 633 rc = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 634 ms->kernel_cmdline); 635 if (rc < 0) { 636 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 637 goto fail; 638 } 639 } 640 641 if (binfo->initrd_size) { 642 rc = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 643 binfo->initrd_start); 644 if (rc < 0) { 645 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 646 goto fail; 647 } 648 649 rc = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 650 binfo->initrd_start + binfo->initrd_size); 651 if (rc < 0) { 652 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 653 goto fail; 654 } 655 } 656 657 fdt_add_psci_node(fdt); 658 659 if (binfo->modify_dtb) { 660 binfo->modify_dtb(binfo, fdt); 661 } 662 663 qemu_fdt_dumpdtb(fdt, size); 664 665 /* Put the DTB into the memory map as a ROM image: this will ensure 666 * the DTB is copied again upon reset, even if addr points into RAM. 667 */ 668 rom_add_blob_fixed_as("dtb", fdt, size, addr, as); 669 670 g_free(fdt); 671 672 return size; 673 674 fail: 675 g_free(fdt); 676 return -1; 677 } 678 679 static void do_cpu_reset(void *opaque) 680 { 681 ARMCPU *cpu = opaque; 682 CPUState *cs = CPU(cpu); 683 CPUARMState *env = &cpu->env; 684 const struct arm_boot_info *info = env->boot_info; 685 686 cpu_reset(cs); 687 if (info) { 688 if (!info->is_linux) { 689 int i; 690 /* Jump to the entry point. */ 691 uint64_t entry = info->entry; 692 693 switch (info->endianness) { 694 case ARM_ENDIANNESS_LE: 695 env->cp15.sctlr_el[1] &= ~SCTLR_E0E; 696 for (i = 1; i < 4; ++i) { 697 env->cp15.sctlr_el[i] &= ~SCTLR_EE; 698 } 699 env->uncached_cpsr &= ~CPSR_E; 700 break; 701 case ARM_ENDIANNESS_BE8: 702 env->cp15.sctlr_el[1] |= SCTLR_E0E; 703 for (i = 1; i < 4; ++i) { 704 env->cp15.sctlr_el[i] |= SCTLR_EE; 705 } 706 env->uncached_cpsr |= CPSR_E; 707 break; 708 case ARM_ENDIANNESS_BE32: 709 env->cp15.sctlr_el[1] |= SCTLR_B; 710 break; 711 case ARM_ENDIANNESS_UNKNOWN: 712 break; /* Board's decision */ 713 default: 714 g_assert_not_reached(); 715 } 716 717 cpu_set_pc(cs, entry); 718 } else { 719 /* If we are booting Linux then we need to check whether we are 720 * booting into secure or non-secure state and adjust the state 721 * accordingly. Out of reset, ARM is defined to be in secure state 722 * (SCR.NS = 0), we change that here if non-secure boot has been 723 * requested. 724 */ 725 if (arm_feature(env, ARM_FEATURE_EL3)) { 726 /* AArch64 is defined to come out of reset into EL3 if enabled. 727 * If we are booting Linux then we need to adjust our EL as 728 * Linux expects us to be in EL2 or EL1. AArch32 resets into 729 * SVC, which Linux expects, so no privilege/exception level to 730 * adjust. 731 */ 732 if (env->aarch64) { 733 env->cp15.scr_el3 |= SCR_RW; 734 if (arm_feature(env, ARM_FEATURE_EL2)) { 735 env->cp15.hcr_el2 |= HCR_RW; 736 env->pstate = PSTATE_MODE_EL2h; 737 } else { 738 env->pstate = PSTATE_MODE_EL1h; 739 } 740 if (cpu_isar_feature(aa64_pauth, cpu)) { 741 env->cp15.scr_el3 |= SCR_API | SCR_APK; 742 } 743 if (cpu_isar_feature(aa64_mte, cpu)) { 744 env->cp15.scr_el3 |= SCR_ATA; 745 } 746 if (cpu_isar_feature(aa64_sve, cpu)) { 747 env->cp15.cptr_el[3] |= CPTR_EZ; 748 } 749 /* AArch64 kernels never boot in secure mode */ 750 assert(!info->secure_boot); 751 /* This hook is only supported for AArch32 currently: 752 * bootloader_aarch64[] will not call the hook, and 753 * the code above has already dropped us into EL2 or EL1. 754 */ 755 assert(!info->secure_board_setup); 756 } 757 758 if (arm_feature(env, ARM_FEATURE_EL2)) { 759 /* If we have EL2 then Linux expects the HVC insn to work */ 760 env->cp15.scr_el3 |= SCR_HCE; 761 } 762 763 /* Set to non-secure if not a secure boot */ 764 if (!info->secure_boot && 765 (cs != first_cpu || !info->secure_board_setup)) { 766 /* Linux expects non-secure state */ 767 env->cp15.scr_el3 |= SCR_NS; 768 /* Set NSACR.{CP11,CP10} so NS can access the FPU */ 769 env->cp15.nsacr |= 3 << 10; 770 } 771 } 772 773 if (!env->aarch64 && !info->secure_boot && 774 arm_feature(env, ARM_FEATURE_EL2)) { 775 /* 776 * This is an AArch32 boot not to Secure state, and 777 * we have Hyp mode available, so boot the kernel into 778 * Hyp mode. This is not how the CPU comes out of reset, 779 * so we need to manually put it there. 780 */ 781 cpsr_write(env, ARM_CPU_MODE_HYP, CPSR_M, CPSRWriteRaw); 782 } 783 784 if (cs == first_cpu) { 785 AddressSpace *as = arm_boot_address_space(cpu, info); 786 787 cpu_set_pc(cs, info->loader_start); 788 789 if (!have_dtb(info)) { 790 if (old_param) { 791 set_kernel_args_old(info, as); 792 } else { 793 set_kernel_args(info, as); 794 } 795 } 796 } else { 797 info->secondary_cpu_reset_hook(cpu, info); 798 } 799 } 800 arm_rebuild_hflags(env); 801 } 802 } 803 804 /** 805 * load_image_to_fw_cfg() - Load an image file into an fw_cfg entry identified 806 * by key. 807 * @fw_cfg: The firmware config instance to store the data in. 808 * @size_key: The firmware config key to store the size of the loaded 809 * data under, with fw_cfg_add_i32(). 810 * @data_key: The firmware config key to store the loaded data under, 811 * with fw_cfg_add_bytes(). 812 * @image_name: The name of the image file to load. If it is NULL, the 813 * function returns without doing anything. 814 * @try_decompress: Whether the image should be decompressed (gunzipped) before 815 * adding it to fw_cfg. If decompression fails, the image is 816 * loaded as-is. 817 * 818 * In case of failure, the function prints an error message to stderr and the 819 * process exits with status 1. 820 */ 821 static void load_image_to_fw_cfg(FWCfgState *fw_cfg, uint16_t size_key, 822 uint16_t data_key, const char *image_name, 823 bool try_decompress) 824 { 825 size_t size = -1; 826 uint8_t *data; 827 828 if (image_name == NULL) { 829 return; 830 } 831 832 if (try_decompress) { 833 size = load_image_gzipped_buffer(image_name, 834 LOAD_IMAGE_MAX_GUNZIP_BYTES, &data); 835 } 836 837 if (size == (size_t)-1) { 838 gchar *contents; 839 gsize length; 840 841 if (!g_file_get_contents(image_name, &contents, &length, NULL)) { 842 error_report("failed to load \"%s\"", image_name); 843 exit(1); 844 } 845 size = length; 846 data = (uint8_t *)contents; 847 } 848 849 fw_cfg_add_i32(fw_cfg, size_key, size); 850 fw_cfg_add_bytes(fw_cfg, data_key, data, size); 851 } 852 853 static int do_arm_linux_init(Object *obj, void *opaque) 854 { 855 if (object_dynamic_cast(obj, TYPE_ARM_LINUX_BOOT_IF)) { 856 ARMLinuxBootIf *albif = ARM_LINUX_BOOT_IF(obj); 857 ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_GET_CLASS(obj); 858 struct arm_boot_info *info = opaque; 859 860 if (albifc->arm_linux_init) { 861 albifc->arm_linux_init(albif, info->secure_boot); 862 } 863 } 864 return 0; 865 } 866 867 static int64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, 868 uint64_t *lowaddr, uint64_t *highaddr, 869 int elf_machine, AddressSpace *as) 870 { 871 bool elf_is64; 872 union { 873 Elf32_Ehdr h32; 874 Elf64_Ehdr h64; 875 } elf_header; 876 int data_swab = 0; 877 bool big_endian; 878 int64_t ret = -1; 879 Error *err = NULL; 880 881 882 load_elf_hdr(info->kernel_filename, &elf_header, &elf_is64, &err); 883 if (err) { 884 error_free(err); 885 return ret; 886 } 887 888 if (elf_is64) { 889 big_endian = elf_header.h64.e_ident[EI_DATA] == ELFDATA2MSB; 890 info->endianness = big_endian ? ARM_ENDIANNESS_BE8 891 : ARM_ENDIANNESS_LE; 892 } else { 893 big_endian = elf_header.h32.e_ident[EI_DATA] == ELFDATA2MSB; 894 if (big_endian) { 895 if (bswap32(elf_header.h32.e_flags) & EF_ARM_BE8) { 896 info->endianness = ARM_ENDIANNESS_BE8; 897 } else { 898 info->endianness = ARM_ENDIANNESS_BE32; 899 /* In BE32, the CPU has a different view of the per-byte 900 * address map than the rest of the system. BE32 ELF files 901 * are organised such that they can be programmed through 902 * the CPU's per-word byte-reversed view of the world. QEMU 903 * however loads ELF files independently of the CPU. So 904 * tell the ELF loader to byte reverse the data for us. 905 */ 906 data_swab = 2; 907 } 908 } else { 909 info->endianness = ARM_ENDIANNESS_LE; 910 } 911 } 912 913 ret = load_elf_as(info->kernel_filename, NULL, NULL, NULL, 914 pentry, lowaddr, highaddr, NULL, big_endian, elf_machine, 915 1, data_swab, as); 916 if (ret <= 0) { 917 /* The header loaded but the image didn't */ 918 exit(1); 919 } 920 921 return ret; 922 } 923 924 static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, 925 hwaddr *entry, AddressSpace *as) 926 { 927 hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; 928 uint64_t kernel_size = 0; 929 uint8_t *buffer; 930 int size; 931 932 /* On aarch64, it's the bootloader's job to uncompress the kernel. */ 933 size = load_image_gzipped_buffer(filename, LOAD_IMAGE_MAX_GUNZIP_BYTES, 934 &buffer); 935 936 if (size < 0) { 937 gsize len; 938 939 /* Load as raw file otherwise */ 940 if (!g_file_get_contents(filename, (char **)&buffer, &len, NULL)) { 941 return -1; 942 } 943 size = len; 944 } 945 946 /* check the arm64 magic header value -- very old kernels may not have it */ 947 if (size > ARM64_MAGIC_OFFSET + 4 && 948 memcmp(buffer + ARM64_MAGIC_OFFSET, "ARM\x64", 4) == 0) { 949 uint64_t hdrvals[2]; 950 951 /* The arm64 Image header has text_offset and image_size fields at 8 and 952 * 16 bytes into the Image header, respectively. The text_offset field 953 * is only valid if the image_size is non-zero. 954 */ 955 memcpy(&hdrvals, buffer + ARM64_TEXT_OFFSET_OFFSET, sizeof(hdrvals)); 956 957 kernel_size = le64_to_cpu(hdrvals[1]); 958 959 if (kernel_size != 0) { 960 kernel_load_offset = le64_to_cpu(hdrvals[0]); 961 962 /* 963 * We write our startup "bootloader" at the very bottom of RAM, 964 * so that bit can't be used for the image. Luckily the Image 965 * format specification is that the image requests only an offset 966 * from a 2MB boundary, not an absolute load address. So if the 967 * image requests an offset that might mean it overlaps with the 968 * bootloader, we can just load it starting at 2MB+offset rather 969 * than 0MB + offset. 970 */ 971 if (kernel_load_offset < BOOTLOADER_MAX_SIZE) { 972 kernel_load_offset += 2 * MiB; 973 } 974 } 975 } 976 977 /* 978 * Kernels before v3.17 don't populate the image_size field, and 979 * raw images have no header. For those our best guess at the size 980 * is the size of the Image file itself. 981 */ 982 if (kernel_size == 0) { 983 kernel_size = size; 984 } 985 986 *entry = mem_base + kernel_load_offset; 987 rom_add_blob_fixed_as(filename, buffer, size, *entry, as); 988 989 g_free(buffer); 990 991 return kernel_size; 992 } 993 994 static void arm_setup_direct_kernel_boot(ARMCPU *cpu, 995 struct arm_boot_info *info) 996 { 997 /* Set up for a direct boot of a kernel image file. */ 998 CPUState *cs; 999 AddressSpace *as = arm_boot_address_space(cpu, info); 1000 int kernel_size; 1001 int initrd_size; 1002 int is_linux = 0; 1003 uint64_t elf_entry; 1004 /* Addresses of first byte used and first byte not used by the image */ 1005 uint64_t image_low_addr = 0, image_high_addr = 0; 1006 int elf_machine; 1007 hwaddr entry; 1008 static const ARMInsnFixup *primary_loader; 1009 uint64_t ram_end = info->loader_start + info->ram_size; 1010 1011 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { 1012 primary_loader = bootloader_aarch64; 1013 elf_machine = EM_AARCH64; 1014 } else { 1015 primary_loader = bootloader; 1016 if (!info->write_board_setup) { 1017 primary_loader += BOOTLOADER_NO_BOARD_SETUP_OFFSET; 1018 } 1019 elf_machine = EM_ARM; 1020 } 1021 1022 if (!info->secondary_cpu_reset_hook) { 1023 info->secondary_cpu_reset_hook = default_reset_secondary; 1024 } 1025 if (!info->write_secondary_boot) { 1026 info->write_secondary_boot = default_write_secondary; 1027 } 1028 1029 if (info->nb_cpus == 0) 1030 info->nb_cpus = 1; 1031 1032 /* Assume that raw images are linux kernels, and ELF images are not. */ 1033 kernel_size = arm_load_elf(info, &elf_entry, &image_low_addr, 1034 &image_high_addr, elf_machine, as); 1035 if (kernel_size > 0 && have_dtb(info)) { 1036 /* 1037 * If there is still some room left at the base of RAM, try and put 1038 * the DTB there like we do for images loaded with -bios or -pflash. 1039 */ 1040 if (image_low_addr > info->loader_start 1041 || image_high_addr < info->loader_start) { 1042 /* 1043 * Set image_low_addr as address limit for arm_load_dtb if it may be 1044 * pointing into RAM, otherwise pass '0' (no limit) 1045 */ 1046 if (image_low_addr < info->loader_start) { 1047 image_low_addr = 0; 1048 } 1049 info->dtb_start = info->loader_start; 1050 info->dtb_limit = image_low_addr; 1051 } 1052 } 1053 entry = elf_entry; 1054 if (kernel_size < 0) { 1055 uint64_t loadaddr = info->loader_start + KERNEL_NOLOAD_ADDR; 1056 kernel_size = load_uimage_as(info->kernel_filename, &entry, &loadaddr, 1057 &is_linux, NULL, NULL, as); 1058 if (kernel_size >= 0) { 1059 image_low_addr = loadaddr; 1060 image_high_addr = image_low_addr + kernel_size; 1061 } 1062 } 1063 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { 1064 kernel_size = load_aarch64_image(info->kernel_filename, 1065 info->loader_start, &entry, as); 1066 is_linux = 1; 1067 if (kernel_size >= 0) { 1068 image_low_addr = entry; 1069 image_high_addr = image_low_addr + kernel_size; 1070 } 1071 } else if (kernel_size < 0) { 1072 /* 32-bit ARM */ 1073 entry = info->loader_start + KERNEL_LOAD_ADDR; 1074 kernel_size = load_image_targphys_as(info->kernel_filename, entry, 1075 ram_end - KERNEL_LOAD_ADDR, as); 1076 is_linux = 1; 1077 if (kernel_size >= 0) { 1078 image_low_addr = entry; 1079 image_high_addr = image_low_addr + kernel_size; 1080 } 1081 } 1082 if (kernel_size < 0) { 1083 error_report("could not load kernel '%s'", info->kernel_filename); 1084 exit(1); 1085 } 1086 1087 if (kernel_size > info->ram_size) { 1088 error_report("kernel '%s' is too large to fit in RAM " 1089 "(kernel size %d, RAM size %" PRId64 ")", 1090 info->kernel_filename, kernel_size, info->ram_size); 1091 exit(1); 1092 } 1093 1094 info->entry = entry; 1095 1096 /* 1097 * We want to put the initrd far enough into RAM that when the 1098 * kernel is uncompressed it will not clobber the initrd. However 1099 * on boards without much RAM we must ensure that we still leave 1100 * enough room for a decent sized initrd, and on boards with large 1101 * amounts of RAM we must avoid the initrd being so far up in RAM 1102 * that it is outside lowmem and inaccessible to the kernel. 1103 * So for boards with less than 256MB of RAM we put the initrd 1104 * halfway into RAM, and for boards with 256MB of RAM or more we put 1105 * the initrd at 128MB. 1106 * We also refuse to put the initrd somewhere that will definitely 1107 * overlay the kernel we just loaded, though for kernel formats which 1108 * don't tell us their exact size (eg self-decompressing 32-bit kernels) 1109 * we might still make a bad choice here. 1110 */ 1111 info->initrd_start = info->loader_start + 1112 MIN(info->ram_size / 2, 128 * MiB); 1113 if (image_high_addr) { 1114 info->initrd_start = MAX(info->initrd_start, image_high_addr); 1115 } 1116 info->initrd_start = TARGET_PAGE_ALIGN(info->initrd_start); 1117 1118 if (is_linux) { 1119 uint32_t fixupcontext[FIXUP_MAX]; 1120 1121 if (info->initrd_filename) { 1122 1123 if (info->initrd_start >= ram_end) { 1124 error_report("not enough space after kernel to load initrd"); 1125 exit(1); 1126 } 1127 1128 initrd_size = load_ramdisk_as(info->initrd_filename, 1129 info->initrd_start, 1130 ram_end - info->initrd_start, as); 1131 if (initrd_size < 0) { 1132 initrd_size = load_image_targphys_as(info->initrd_filename, 1133 info->initrd_start, 1134 ram_end - 1135 info->initrd_start, 1136 as); 1137 } 1138 if (initrd_size < 0) { 1139 error_report("could not load initrd '%s'", 1140 info->initrd_filename); 1141 exit(1); 1142 } 1143 if (info->initrd_start + initrd_size > ram_end) { 1144 error_report("could not load initrd '%s': " 1145 "too big to fit into RAM after the kernel", 1146 info->initrd_filename); 1147 exit(1); 1148 } 1149 } else { 1150 initrd_size = 0; 1151 } 1152 info->initrd_size = initrd_size; 1153 1154 fixupcontext[FIXUP_BOARDID] = info->board_id; 1155 fixupcontext[FIXUP_BOARD_SETUP] = info->board_setup_addr; 1156 1157 /* 1158 * for device tree boot, we pass the DTB directly in r2. Otherwise 1159 * we point to the kernel args. 1160 */ 1161 if (have_dtb(info)) { 1162 hwaddr align; 1163 1164 if (elf_machine == EM_AARCH64) { 1165 /* 1166 * Some AArch64 kernels on early bootup map the fdt region as 1167 * 1168 * [ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ] 1169 * 1170 * Let's play safe and prealign it to 2MB to give us some space. 1171 */ 1172 align = 2 * MiB; 1173 } else { 1174 /* 1175 * Some 32bit kernels will trash anything in the 4K page the 1176 * initrd ends in, so make sure the DTB isn't caught up in that. 1177 */ 1178 align = 4 * KiB; 1179 } 1180 1181 /* Place the DTB after the initrd in memory with alignment. */ 1182 info->dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, 1183 align); 1184 if (info->dtb_start >= ram_end) { 1185 error_report("Not enough space for DTB after kernel/initrd"); 1186 exit(1); 1187 } 1188 fixupcontext[FIXUP_ARGPTR_LO] = info->dtb_start; 1189 fixupcontext[FIXUP_ARGPTR_HI] = info->dtb_start >> 32; 1190 } else { 1191 fixupcontext[FIXUP_ARGPTR_LO] = 1192 info->loader_start + KERNEL_ARGS_ADDR; 1193 fixupcontext[FIXUP_ARGPTR_HI] = 1194 (info->loader_start + KERNEL_ARGS_ADDR) >> 32; 1195 if (info->ram_size >= 4 * GiB) { 1196 error_report("RAM size must be less than 4GB to boot" 1197 " Linux kernel using ATAGS (try passing a device tree" 1198 " using -dtb)"); 1199 exit(1); 1200 } 1201 } 1202 fixupcontext[FIXUP_ENTRYPOINT_LO] = entry; 1203 fixupcontext[FIXUP_ENTRYPOINT_HI] = entry >> 32; 1204 1205 write_bootloader("bootloader", info->loader_start, 1206 primary_loader, fixupcontext, as); 1207 1208 if (info->nb_cpus > 1) { 1209 info->write_secondary_boot(cpu, info); 1210 } 1211 if (info->write_board_setup) { 1212 info->write_board_setup(cpu, info); 1213 } 1214 1215 /* 1216 * Notify devices which need to fake up firmware initialization 1217 * that we're doing a direct kernel boot. 1218 */ 1219 object_child_foreach_recursive(object_get_root(), 1220 do_arm_linux_init, info); 1221 } 1222 info->is_linux = is_linux; 1223 1224 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 1225 ARM_CPU(cs)->env.boot_info = info; 1226 } 1227 } 1228 1229 static void arm_setup_firmware_boot(ARMCPU *cpu, struct arm_boot_info *info) 1230 { 1231 /* Set up for booting firmware (which might load a kernel via fw_cfg) */ 1232 1233 if (have_dtb(info)) { 1234 /* 1235 * If we have a device tree blob, but no kernel to supply it to (or 1236 * the kernel is supposed to be loaded by the bootloader), copy the 1237 * DTB to the base of RAM for the bootloader to pick up. 1238 */ 1239 info->dtb_start = info->loader_start; 1240 } 1241 1242 if (info->kernel_filename) { 1243 FWCfgState *fw_cfg; 1244 bool try_decompressing_kernel; 1245 1246 fw_cfg = fw_cfg_find(); 1247 try_decompressing_kernel = arm_feature(&cpu->env, 1248 ARM_FEATURE_AARCH64); 1249 1250 /* 1251 * Expose the kernel, the command line, and the initrd in fw_cfg. 1252 * We don't process them here at all, it's all left to the 1253 * firmware. 1254 */ 1255 load_image_to_fw_cfg(fw_cfg, 1256 FW_CFG_KERNEL_SIZE, FW_CFG_KERNEL_DATA, 1257 info->kernel_filename, 1258 try_decompressing_kernel); 1259 load_image_to_fw_cfg(fw_cfg, 1260 FW_CFG_INITRD_SIZE, FW_CFG_INITRD_DATA, 1261 info->initrd_filename, false); 1262 1263 if (info->kernel_cmdline) { 1264 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 1265 strlen(info->kernel_cmdline) + 1); 1266 fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, 1267 info->kernel_cmdline); 1268 } 1269 } 1270 1271 /* 1272 * We will start from address 0 (typically a boot ROM image) in the 1273 * same way as hardware. Leave env->boot_info NULL, so that 1274 * do_cpu_reset() knows it does not need to alter the PC on reset. 1275 */ 1276 } 1277 1278 void arm_load_kernel(ARMCPU *cpu, MachineState *ms, struct arm_boot_info *info) 1279 { 1280 CPUState *cs; 1281 AddressSpace *as = arm_boot_address_space(cpu, info); 1282 1283 /* 1284 * CPU objects (unlike devices) are not automatically reset on system 1285 * reset, so we must always register a handler to do so. If we're 1286 * actually loading a kernel, the handler is also responsible for 1287 * arranging that we start it correctly. 1288 */ 1289 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 1290 qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); 1291 } 1292 1293 /* 1294 * The board code is not supposed to set secure_board_setup unless 1295 * running its code in secure mode is actually possible, and KVM 1296 * doesn't support secure. 1297 */ 1298 assert(!(info->secure_board_setup && kvm_enabled())); 1299 info->kernel_filename = ms->kernel_filename; 1300 info->kernel_cmdline = ms->kernel_cmdline; 1301 info->initrd_filename = ms->initrd_filename; 1302 info->dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); 1303 info->dtb_limit = 0; 1304 1305 /* Load the kernel. */ 1306 if (!info->kernel_filename || info->firmware_loaded) { 1307 arm_setup_firmware_boot(cpu, info); 1308 } else { 1309 arm_setup_direct_kernel_boot(cpu, info); 1310 } 1311 1312 if (!info->skip_dtb_autoload && have_dtb(info)) { 1313 if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as, ms) < 0) { 1314 exit(1); 1315 } 1316 } 1317 } 1318 1319 static const TypeInfo arm_linux_boot_if_info = { 1320 .name = TYPE_ARM_LINUX_BOOT_IF, 1321 .parent = TYPE_INTERFACE, 1322 .class_size = sizeof(ARMLinuxBootIfClass), 1323 }; 1324 1325 static void arm_linux_boot_register_types(void) 1326 { 1327 type_register_static(&arm_linux_boot_if_info); 1328 } 1329 1330 type_init(arm_linux_boot_register_types) 1331