1 /* 2 * ARM kernel loader. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "config.h" 11 #include "hw/hw.h" 12 #include "hw/arm/arm.h" 13 #include "sysemu/sysemu.h" 14 #include "hw/boards.h" 15 #include "hw/loader.h" 16 #include "elf.h" 17 #include "sysemu/device_tree.h" 18 #include "qemu/config-file.h" 19 #include "exec/address-spaces.h" 20 21 /* Kernel boot protocol is specified in the kernel docs 22 * Documentation/arm/Booting and Documentation/arm64/booting.txt 23 * They have different preferred image load offsets from system RAM base. 24 */ 25 #define KERNEL_ARGS_ADDR 0x100 26 #define KERNEL_LOAD_ADDR 0x00010000 27 #define KERNEL64_LOAD_ADDR 0x00080000 28 29 typedef enum { 30 FIXUP_NONE = 0, /* do nothing */ 31 FIXUP_TERMINATOR, /* end of insns */ 32 FIXUP_BOARDID, /* overwrite with board ID number */ 33 FIXUP_ARGPTR, /* overwrite with pointer to kernel args */ 34 FIXUP_ENTRYPOINT, /* overwrite with kernel entry point */ 35 FIXUP_GIC_CPU_IF, /* overwrite with GIC CPU interface address */ 36 FIXUP_BOOTREG, /* overwrite with boot register address */ 37 FIXUP_DSB, /* overwrite with correct DSB insn for cpu */ 38 FIXUP_MAX, 39 } FixupType; 40 41 typedef struct ARMInsnFixup { 42 uint32_t insn; 43 FixupType fixup; 44 } ARMInsnFixup; 45 46 static const ARMInsnFixup bootloader_aarch64[] = { 47 { 0x580000c0 }, /* ldr x0, arg ; Load the lower 32-bits of DTB */ 48 { 0xaa1f03e1 }, /* mov x1, xzr */ 49 { 0xaa1f03e2 }, /* mov x2, xzr */ 50 { 0xaa1f03e3 }, /* mov x3, xzr */ 51 { 0x58000084 }, /* ldr x4, entry ; Load the lower 32-bits of kernel entry */ 52 { 0xd61f0080 }, /* br x4 ; Jump to the kernel entry point */ 53 { 0, FIXUP_ARGPTR }, /* arg: .word @DTB Lower 32-bits */ 54 { 0 }, /* .word @DTB Higher 32-bits */ 55 { 0, FIXUP_ENTRYPOINT }, /* entry: .word @Kernel Entry Lower 32-bits */ 56 { 0 }, /* .word @Kernel Entry Higher 32-bits */ 57 { 0, FIXUP_TERMINATOR } 58 }; 59 60 /* The worlds second smallest bootloader. Set r0-r2, then jump to kernel. */ 61 static const ARMInsnFixup bootloader[] = { 62 { 0xe3a00000 }, /* mov r0, #0 */ 63 { 0xe59f1004 }, /* ldr r1, [pc, #4] */ 64 { 0xe59f2004 }, /* ldr r2, [pc, #4] */ 65 { 0xe59ff004 }, /* ldr pc, [pc, #4] */ 66 { 0, FIXUP_BOARDID }, 67 { 0, FIXUP_ARGPTR }, 68 { 0, FIXUP_ENTRYPOINT }, 69 { 0, FIXUP_TERMINATOR } 70 }; 71 72 /* Handling for secondary CPU boot in a multicore system. 73 * Unlike the uniprocessor/primary CPU boot, this is platform 74 * dependent. The default code here is based on the secondary 75 * CPU boot protocol used on realview/vexpress boards, with 76 * some parameterisation to increase its flexibility. 77 * QEMU platform models for which this code is not appropriate 78 * should override write_secondary_boot and secondary_cpu_reset_hook 79 * instead. 80 * 81 * This code enables the interrupt controllers for the secondary 82 * CPUs and then puts all the secondary CPUs into a loop waiting 83 * for an interprocessor interrupt and polling a configurable 84 * location for the kernel secondary CPU entry point. 85 */ 86 #define DSB_INSN 0xf57ff04f 87 #define CP15_DSB_INSN 0xee070f9a /* mcr cp15, 0, r0, c7, c10, 4 */ 88 89 static const ARMInsnFixup smpboot[] = { 90 { 0xe59f2028 }, /* ldr r2, gic_cpu_if */ 91 { 0xe59f0028 }, /* ldr r0, bootreg_addr */ 92 { 0xe3a01001 }, /* mov r1, #1 */ 93 { 0xe5821000 }, /* str r1, [r2] - set GICC_CTLR.Enable */ 94 { 0xe3a010ff }, /* mov r1, #0xff */ 95 { 0xe5821004 }, /* str r1, [r2, 4] - set GIC_PMR.Priority to 0xff */ 96 { 0, FIXUP_DSB }, /* dsb */ 97 { 0xe320f003 }, /* wfi */ 98 { 0xe5901000 }, /* ldr r1, [r0] */ 99 { 0xe1110001 }, /* tst r1, r1 */ 100 { 0x0afffffb }, /* beq <wfi> */ 101 { 0xe12fff11 }, /* bx r1 */ 102 { 0, FIXUP_GIC_CPU_IF }, /* gic_cpu_if: .word 0x.... */ 103 { 0, FIXUP_BOOTREG }, /* bootreg_addr: .word 0x.... */ 104 { 0, FIXUP_TERMINATOR } 105 }; 106 107 static void write_bootloader(const char *name, hwaddr addr, 108 const ARMInsnFixup *insns, uint32_t *fixupcontext) 109 { 110 /* Fix up the specified bootloader fragment and write it into 111 * guest memory using rom_add_blob_fixed(). fixupcontext is 112 * an array giving the values to write in for the fixup types 113 * which write a value into the code array. 114 */ 115 int i, len; 116 uint32_t *code; 117 118 len = 0; 119 while (insns[len].fixup != FIXUP_TERMINATOR) { 120 len++; 121 } 122 123 code = g_new0(uint32_t, len); 124 125 for (i = 0; i < len; i++) { 126 uint32_t insn = insns[i].insn; 127 FixupType fixup = insns[i].fixup; 128 129 switch (fixup) { 130 case FIXUP_NONE: 131 break; 132 case FIXUP_BOARDID: 133 case FIXUP_ARGPTR: 134 case FIXUP_ENTRYPOINT: 135 case FIXUP_GIC_CPU_IF: 136 case FIXUP_BOOTREG: 137 case FIXUP_DSB: 138 insn = fixupcontext[fixup]; 139 break; 140 default: 141 abort(); 142 } 143 code[i] = tswap32(insn); 144 } 145 146 rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); 147 148 g_free(code); 149 } 150 151 static void default_write_secondary(ARMCPU *cpu, 152 const struct arm_boot_info *info) 153 { 154 uint32_t fixupcontext[FIXUP_MAX]; 155 156 fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; 157 fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; 158 if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { 159 fixupcontext[FIXUP_DSB] = DSB_INSN; 160 } else { 161 fixupcontext[FIXUP_DSB] = CP15_DSB_INSN; 162 } 163 164 write_bootloader("smpboot", info->smp_loader_start, 165 smpboot, fixupcontext); 166 } 167 168 static void default_reset_secondary(ARMCPU *cpu, 169 const struct arm_boot_info *info) 170 { 171 CPUARMState *env = &cpu->env; 172 173 stl_phys_notdirty(&address_space_memory, info->smp_bootreg_addr, 0); 174 env->regs[15] = info->smp_loader_start; 175 } 176 177 static inline bool have_dtb(const struct arm_boot_info *info) 178 { 179 return info->dtb_filename || info->get_dtb; 180 } 181 182 #define WRITE_WORD(p, value) do { \ 183 stl_phys_notdirty(&address_space_memory, p, value); \ 184 p += 4; \ 185 } while (0) 186 187 static void set_kernel_args(const struct arm_boot_info *info) 188 { 189 int initrd_size = info->initrd_size; 190 hwaddr base = info->loader_start; 191 hwaddr p; 192 193 p = base + KERNEL_ARGS_ADDR; 194 /* ATAG_CORE */ 195 WRITE_WORD(p, 5); 196 WRITE_WORD(p, 0x54410001); 197 WRITE_WORD(p, 1); 198 WRITE_WORD(p, 0x1000); 199 WRITE_WORD(p, 0); 200 /* ATAG_MEM */ 201 /* TODO: handle multiple chips on one ATAG list */ 202 WRITE_WORD(p, 4); 203 WRITE_WORD(p, 0x54410002); 204 WRITE_WORD(p, info->ram_size); 205 WRITE_WORD(p, info->loader_start); 206 if (initrd_size) { 207 /* ATAG_INITRD2 */ 208 WRITE_WORD(p, 4); 209 WRITE_WORD(p, 0x54420005); 210 WRITE_WORD(p, info->initrd_start); 211 WRITE_WORD(p, initrd_size); 212 } 213 if (info->kernel_cmdline && *info->kernel_cmdline) { 214 /* ATAG_CMDLINE */ 215 int cmdline_size; 216 217 cmdline_size = strlen(info->kernel_cmdline); 218 cpu_physical_memory_write(p + 8, info->kernel_cmdline, 219 cmdline_size + 1); 220 cmdline_size = (cmdline_size >> 2) + 1; 221 WRITE_WORD(p, cmdline_size + 2); 222 WRITE_WORD(p, 0x54410009); 223 p += cmdline_size * 4; 224 } 225 if (info->atag_board) { 226 /* ATAG_BOARD */ 227 int atag_board_len; 228 uint8_t atag_board_buf[0x1000]; 229 230 atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; 231 WRITE_WORD(p, (atag_board_len + 8) >> 2); 232 WRITE_WORD(p, 0x414f4d50); 233 cpu_physical_memory_write(p, atag_board_buf, atag_board_len); 234 p += atag_board_len; 235 } 236 /* ATAG_END */ 237 WRITE_WORD(p, 0); 238 WRITE_WORD(p, 0); 239 } 240 241 static void set_kernel_args_old(const struct arm_boot_info *info) 242 { 243 hwaddr p; 244 const char *s; 245 int initrd_size = info->initrd_size; 246 hwaddr base = info->loader_start; 247 248 /* see linux/include/asm-arm/setup.h */ 249 p = base + KERNEL_ARGS_ADDR; 250 /* page_size */ 251 WRITE_WORD(p, 4096); 252 /* nr_pages */ 253 WRITE_WORD(p, info->ram_size / 4096); 254 /* ramdisk_size */ 255 WRITE_WORD(p, 0); 256 #define FLAG_READONLY 1 257 #define FLAG_RDLOAD 4 258 #define FLAG_RDPROMPT 8 259 /* flags */ 260 WRITE_WORD(p, FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT); 261 /* rootdev */ 262 WRITE_WORD(p, (31 << 8) | 0); /* /dev/mtdblock0 */ 263 /* video_num_cols */ 264 WRITE_WORD(p, 0); 265 /* video_num_rows */ 266 WRITE_WORD(p, 0); 267 /* video_x */ 268 WRITE_WORD(p, 0); 269 /* video_y */ 270 WRITE_WORD(p, 0); 271 /* memc_control_reg */ 272 WRITE_WORD(p, 0); 273 /* unsigned char sounddefault */ 274 /* unsigned char adfsdrives */ 275 /* unsigned char bytes_per_char_h */ 276 /* unsigned char bytes_per_char_v */ 277 WRITE_WORD(p, 0); 278 /* pages_in_bank[4] */ 279 WRITE_WORD(p, 0); 280 WRITE_WORD(p, 0); 281 WRITE_WORD(p, 0); 282 WRITE_WORD(p, 0); 283 /* pages_in_vram */ 284 WRITE_WORD(p, 0); 285 /* initrd_start */ 286 if (initrd_size) { 287 WRITE_WORD(p, info->initrd_start); 288 } else { 289 WRITE_WORD(p, 0); 290 } 291 /* initrd_size */ 292 WRITE_WORD(p, initrd_size); 293 /* rd_start */ 294 WRITE_WORD(p, 0); 295 /* system_rev */ 296 WRITE_WORD(p, 0); 297 /* system_serial_low */ 298 WRITE_WORD(p, 0); 299 /* system_serial_high */ 300 WRITE_WORD(p, 0); 301 /* mem_fclk_21285 */ 302 WRITE_WORD(p, 0); 303 /* zero unused fields */ 304 while (p < base + KERNEL_ARGS_ADDR + 256 + 1024) { 305 WRITE_WORD(p, 0); 306 } 307 s = info->kernel_cmdline; 308 if (s) { 309 cpu_physical_memory_write(p, s, strlen(s) + 1); 310 } else { 311 WRITE_WORD(p, 0); 312 } 313 } 314 315 /** 316 * load_dtb() - load a device tree binary image into memory 317 * @addr: the address to load the image at 318 * @binfo: struct describing the boot environment 319 * @addr_limit: upper limit of the available memory area at @addr 320 * 321 * Load a device tree supplied by the machine or by the user with the 322 * '-dtb' command line option, and put it at offset @addr in target 323 * memory. 324 * 325 * If @addr_limit contains a meaningful value (i.e., it is strictly greater 326 * than @addr), the device tree is only loaded if its size does not exceed 327 * the limit. 328 * 329 * Returns: the size of the device tree image on success, 330 * 0 if the image size exceeds the limit, 331 * -1 on errors. 332 * 333 * Note: Must not be called unless have_dtb(binfo) is true. 334 */ 335 static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, 336 hwaddr addr_limit) 337 { 338 void *fdt = NULL; 339 int size, rc; 340 uint32_t acells, scells; 341 342 if (binfo->dtb_filename) { 343 char *filename; 344 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename); 345 if (!filename) { 346 fprintf(stderr, "Couldn't open dtb file %s\n", binfo->dtb_filename); 347 goto fail; 348 } 349 350 fdt = load_device_tree(filename, &size); 351 if (!fdt) { 352 fprintf(stderr, "Couldn't open dtb file %s\n", filename); 353 g_free(filename); 354 goto fail; 355 } 356 g_free(filename); 357 } else { 358 fdt = binfo->get_dtb(binfo, &size); 359 if (!fdt) { 360 fprintf(stderr, "Board was unable to create a dtb blob\n"); 361 goto fail; 362 } 363 } 364 365 if (addr_limit > addr && size > (addr_limit - addr)) { 366 /* Installing the device tree blob at addr would exceed addr_limit. 367 * Whether this constitutes failure is up to the caller to decide, 368 * so just return 0 as size, i.e., no error. 369 */ 370 g_free(fdt); 371 return 0; 372 } 373 374 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells"); 375 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells"); 376 if (acells == 0 || scells == 0) { 377 fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n"); 378 goto fail; 379 } 380 381 if (scells < 2 && binfo->ram_size >= (1ULL << 32)) { 382 /* This is user error so deserves a friendlier error message 383 * than the failure of setprop_sized_cells would provide 384 */ 385 fprintf(stderr, "qemu: dtb file not compatible with " 386 "RAM size > 4GB\n"); 387 goto fail; 388 } 389 390 rc = qemu_fdt_setprop_sized_cells(fdt, "/memory", "reg", 391 acells, binfo->loader_start, 392 scells, binfo->ram_size); 393 if (rc < 0) { 394 fprintf(stderr, "couldn't set /memory/reg\n"); 395 goto fail; 396 } 397 398 if (binfo->kernel_cmdline && *binfo->kernel_cmdline) { 399 rc = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 400 binfo->kernel_cmdline); 401 if (rc < 0) { 402 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 403 goto fail; 404 } 405 } 406 407 if (binfo->initrd_size) { 408 rc = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 409 binfo->initrd_start); 410 if (rc < 0) { 411 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 412 goto fail; 413 } 414 415 rc = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 416 binfo->initrd_start + binfo->initrd_size); 417 if (rc < 0) { 418 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 419 goto fail; 420 } 421 } 422 423 if (binfo->modify_dtb) { 424 binfo->modify_dtb(binfo, fdt); 425 } 426 427 qemu_fdt_dumpdtb(fdt, size); 428 429 /* Put the DTB into the memory map as a ROM image: this will ensure 430 * the DTB is copied again upon reset, even if addr points into RAM. 431 */ 432 rom_add_blob_fixed("dtb", fdt, size, addr); 433 434 g_free(fdt); 435 436 return size; 437 438 fail: 439 g_free(fdt); 440 return -1; 441 } 442 443 static void do_cpu_reset(void *opaque) 444 { 445 ARMCPU *cpu = opaque; 446 CPUARMState *env = &cpu->env; 447 const struct arm_boot_info *info = env->boot_info; 448 449 cpu_reset(CPU(cpu)); 450 if (info) { 451 if (!info->is_linux) { 452 /* Jump to the entry point. */ 453 if (env->aarch64) { 454 env->pc = info->entry; 455 } else { 456 env->regs[15] = info->entry & 0xfffffffe; 457 env->thumb = info->entry & 1; 458 } 459 } else { 460 if (CPU(cpu) == first_cpu) { 461 if (env->aarch64) { 462 env->pc = info->loader_start; 463 } else { 464 env->regs[15] = info->loader_start; 465 } 466 467 if (!have_dtb(info)) { 468 if (old_param) { 469 set_kernel_args_old(info); 470 } else { 471 set_kernel_args(info); 472 } 473 } 474 } else { 475 info->secondary_cpu_reset_hook(cpu, info); 476 } 477 } 478 } 479 } 480 481 void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) 482 { 483 CPUState *cs; 484 int kernel_size; 485 int initrd_size; 486 int is_linux = 0; 487 uint64_t elf_entry, elf_low_addr, elf_high_addr; 488 int elf_machine; 489 hwaddr entry, kernel_load_offset; 490 int big_endian; 491 static const ARMInsnFixup *primary_loader; 492 493 /* CPU objects (unlike devices) are not automatically reset on system 494 * reset, so we must always register a handler to do so. If we're 495 * actually loading a kernel, the handler is also responsible for 496 * arranging that we start it correctly. 497 */ 498 for (cs = CPU(cpu); cs; cs = CPU_NEXT(cs)) { 499 qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); 500 } 501 502 /* Load the kernel. */ 503 if (!info->kernel_filename) { 504 505 if (have_dtb(info)) { 506 /* If we have a device tree blob, but no kernel to supply it to, 507 * copy it to the base of RAM for a bootloader to pick up. 508 */ 509 if (load_dtb(info->loader_start, info, 0) < 0) { 510 exit(1); 511 } 512 } 513 514 /* If no kernel specified, do nothing; we will start from address 0 515 * (typically a boot ROM image) in the same way as hardware. 516 */ 517 return; 518 } 519 520 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { 521 primary_loader = bootloader_aarch64; 522 kernel_load_offset = KERNEL64_LOAD_ADDR; 523 elf_machine = EM_AARCH64; 524 } else { 525 primary_loader = bootloader; 526 kernel_load_offset = KERNEL_LOAD_ADDR; 527 elf_machine = EM_ARM; 528 } 529 530 info->dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); 531 532 if (!info->secondary_cpu_reset_hook) { 533 info->secondary_cpu_reset_hook = default_reset_secondary; 534 } 535 if (!info->write_secondary_boot) { 536 info->write_secondary_boot = default_write_secondary; 537 } 538 539 if (info->nb_cpus == 0) 540 info->nb_cpus = 1; 541 542 #ifdef TARGET_WORDS_BIGENDIAN 543 big_endian = 1; 544 #else 545 big_endian = 0; 546 #endif 547 548 /* We want to put the initrd far enough into RAM that when the 549 * kernel is uncompressed it will not clobber the initrd. However 550 * on boards without much RAM we must ensure that we still leave 551 * enough room for a decent sized initrd, and on boards with large 552 * amounts of RAM we must avoid the initrd being so far up in RAM 553 * that it is outside lowmem and inaccessible to the kernel. 554 * So for boards with less than 256MB of RAM we put the initrd 555 * halfway into RAM, and for boards with 256MB of RAM or more we put 556 * the initrd at 128MB. 557 */ 558 info->initrd_start = info->loader_start + 559 MIN(info->ram_size / 2, 128 * 1024 * 1024); 560 561 /* Assume that raw images are linux kernels, and ELF images are not. */ 562 kernel_size = load_elf(info->kernel_filename, NULL, NULL, &elf_entry, 563 &elf_low_addr, &elf_high_addr, big_endian, 564 elf_machine, 1); 565 if (kernel_size > 0 && have_dtb(info)) { 566 /* If there is still some room left at the base of RAM, try and put 567 * the DTB there like we do for images loaded with -bios or -pflash. 568 */ 569 if (elf_low_addr > info->loader_start 570 || elf_high_addr < info->loader_start) { 571 /* Pass elf_low_addr as address limit to load_dtb if it may be 572 * pointing into RAM, otherwise pass '0' (no limit) 573 */ 574 if (elf_low_addr < info->loader_start) { 575 elf_low_addr = 0; 576 } 577 if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { 578 exit(1); 579 } 580 } 581 } 582 entry = elf_entry; 583 if (kernel_size < 0) { 584 kernel_size = load_uimage(info->kernel_filename, &entry, NULL, 585 &is_linux, NULL, NULL); 586 } 587 /* On aarch64, it's the bootloader's job to uncompress the kernel. */ 588 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { 589 entry = info->loader_start + kernel_load_offset; 590 kernel_size = load_image_gzipped(info->kernel_filename, entry, 591 info->ram_size - kernel_load_offset); 592 is_linux = 1; 593 } 594 if (kernel_size < 0) { 595 entry = info->loader_start + kernel_load_offset; 596 kernel_size = load_image_targphys(info->kernel_filename, entry, 597 info->ram_size - kernel_load_offset); 598 is_linux = 1; 599 } 600 if (kernel_size < 0) { 601 fprintf(stderr, "qemu: could not load kernel '%s'\n", 602 info->kernel_filename); 603 exit(1); 604 } 605 info->entry = entry; 606 if (is_linux) { 607 uint32_t fixupcontext[FIXUP_MAX]; 608 609 if (info->initrd_filename) { 610 initrd_size = load_ramdisk(info->initrd_filename, 611 info->initrd_start, 612 info->ram_size - 613 info->initrd_start); 614 if (initrd_size < 0) { 615 initrd_size = load_image_targphys(info->initrd_filename, 616 info->initrd_start, 617 info->ram_size - 618 info->initrd_start); 619 } 620 if (initrd_size < 0) { 621 fprintf(stderr, "qemu: could not load initrd '%s'\n", 622 info->initrd_filename); 623 exit(1); 624 } 625 } else { 626 initrd_size = 0; 627 } 628 info->initrd_size = initrd_size; 629 630 fixupcontext[FIXUP_BOARDID] = info->board_id; 631 632 /* for device tree boot, we pass the DTB directly in r2. Otherwise 633 * we point to the kernel args. 634 */ 635 if (have_dtb(info)) { 636 /* Place the DTB after the initrd in memory. Note that some 637 * kernels will trash anything in the 4K page the initrd 638 * ends in, so make sure the DTB isn't caught up in that. 639 */ 640 hwaddr dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, 641 4096); 642 if (load_dtb(dtb_start, info, 0) < 0) { 643 exit(1); 644 } 645 fixupcontext[FIXUP_ARGPTR] = dtb_start; 646 } else { 647 fixupcontext[FIXUP_ARGPTR] = info->loader_start + KERNEL_ARGS_ADDR; 648 if (info->ram_size >= (1ULL << 32)) { 649 fprintf(stderr, "qemu: RAM size must be less than 4GB to boot" 650 " Linux kernel using ATAGS (try passing a device tree" 651 " using -dtb)\n"); 652 exit(1); 653 } 654 } 655 fixupcontext[FIXUP_ENTRYPOINT] = entry; 656 657 write_bootloader("bootloader", info->loader_start, 658 primary_loader, fixupcontext); 659 660 if (info->nb_cpus > 1) { 661 info->write_secondary_boot(cpu, info); 662 } 663 } 664 info->is_linux = is_linux; 665 666 for (cs = CPU(cpu); cs; cs = CPU_NEXT(cs)) { 667 ARM_CPU(cs)->env.boot_info = info; 668 } 669 } 670