1 /* 2 * ARM kernel loader. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "qemu/datadir.h" 12 #include "qemu/error-report.h" 13 #include "qapi/error.h" 14 #include <libfdt.h> 15 #include "hw/arm/boot.h" 16 #include "hw/arm/linux-boot-if.h" 17 #include "sysemu/kvm.h" 18 #include "sysemu/tcg.h" 19 #include "sysemu/sysemu.h" 20 #include "sysemu/numa.h" 21 #include "hw/boards.h" 22 #include "sysemu/reset.h" 23 #include "hw/loader.h" 24 #include "elf.h" 25 #include "sysemu/device_tree.h" 26 #include "qemu/config-file.h" 27 #include "qemu/option.h" 28 #include "qemu/units.h" 29 30 /* Kernel boot protocol is specified in the kernel docs 31 * Documentation/arm/Booting and Documentation/arm64/booting.txt 32 * They have different preferred image load offsets from system RAM base. 33 */ 34 #define KERNEL_ARGS_ADDR 0x100 35 #define KERNEL_NOLOAD_ADDR 0x02000000 36 #define KERNEL_LOAD_ADDR 0x00010000 37 #define KERNEL64_LOAD_ADDR 0x00080000 38 39 #define ARM64_TEXT_OFFSET_OFFSET 8 40 #define ARM64_MAGIC_OFFSET 56 41 42 #define BOOTLOADER_MAX_SIZE (4 * KiB) 43 44 AddressSpace *arm_boot_address_space(ARMCPU *cpu, 45 const struct arm_boot_info *info) 46 { 47 /* Return the address space to use for bootloader reads and writes. 48 * We prefer the secure address space if the CPU has it and we're 49 * going to boot the guest into it. 50 */ 51 int asidx; 52 CPUState *cs = CPU(cpu); 53 54 if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { 55 asidx = ARMASIdx_S; 56 } else { 57 asidx = ARMASIdx_NS; 58 } 59 60 return cpu_get_address_space(cs, asidx); 61 } 62 63 static const ARMInsnFixup bootloader_aarch64[] = { 64 { 0x580000c0 }, /* ldr x0, arg ; Load the lower 32-bits of DTB */ 65 { 0xaa1f03e1 }, /* mov x1, xzr */ 66 { 0xaa1f03e2 }, /* mov x2, xzr */ 67 { 0xaa1f03e3 }, /* mov x3, xzr */ 68 { 0x58000084 }, /* ldr x4, entry ; Load the lower 32-bits of kernel entry */ 69 { 0xd61f0080 }, /* br x4 ; Jump to the kernel entry point */ 70 { 0, FIXUP_ARGPTR_LO }, /* arg: .word @DTB Lower 32-bits */ 71 { 0, FIXUP_ARGPTR_HI}, /* .word @DTB Higher 32-bits */ 72 { 0, FIXUP_ENTRYPOINT_LO }, /* entry: .word @Kernel Entry Lower 32-bits */ 73 { 0, FIXUP_ENTRYPOINT_HI }, /* .word @Kernel Entry Higher 32-bits */ 74 { 0, FIXUP_TERMINATOR } 75 }; 76 77 /* A very small bootloader: call the board-setup code (if needed), 78 * set r0-r2, then jump to the kernel. 79 * If we're not calling boot setup code then we don't copy across 80 * the first BOOTLOADER_NO_BOARD_SETUP_OFFSET insns in this array. 81 */ 82 83 static const ARMInsnFixup bootloader[] = { 84 { 0xe28fe004 }, /* add lr, pc, #4 */ 85 { 0xe51ff004 }, /* ldr pc, [pc, #-4] */ 86 { 0, FIXUP_BOARD_SETUP }, 87 #define BOOTLOADER_NO_BOARD_SETUP_OFFSET 3 88 { 0xe3a00000 }, /* mov r0, #0 */ 89 { 0xe59f1004 }, /* ldr r1, [pc, #4] */ 90 { 0xe59f2004 }, /* ldr r2, [pc, #4] */ 91 { 0xe59ff004 }, /* ldr pc, [pc, #4] */ 92 { 0, FIXUP_BOARDID }, 93 { 0, FIXUP_ARGPTR_LO }, 94 { 0, FIXUP_ENTRYPOINT_LO }, 95 { 0, FIXUP_TERMINATOR } 96 }; 97 98 /* Handling for secondary CPU boot in a multicore system. 99 * Unlike the uniprocessor/primary CPU boot, this is platform 100 * dependent. The default code here is based on the secondary 101 * CPU boot protocol used on realview/vexpress boards, with 102 * some parameterisation to increase its flexibility. 103 * QEMU platform models for which this code is not appropriate 104 * should override write_secondary_boot and secondary_cpu_reset_hook 105 * instead. 106 * 107 * This code enables the interrupt controllers for the secondary 108 * CPUs and then puts all the secondary CPUs into a loop waiting 109 * for an interprocessor interrupt and polling a configurable 110 * location for the kernel secondary CPU entry point. 111 */ 112 #define DSB_INSN 0xf57ff04f 113 #define CP15_DSB_INSN 0xee070f9a /* mcr cp15, 0, r0, c7, c10, 4 */ 114 115 static const ARMInsnFixup smpboot[] = { 116 { 0xe59f2028 }, /* ldr r2, gic_cpu_if */ 117 { 0xe59f0028 }, /* ldr r0, bootreg_addr */ 118 { 0xe3a01001 }, /* mov r1, #1 */ 119 { 0xe5821000 }, /* str r1, [r2] - set GICC_CTLR.Enable */ 120 { 0xe3a010ff }, /* mov r1, #0xff */ 121 { 0xe5821004 }, /* str r1, [r2, 4] - set GIC_PMR.Priority to 0xff */ 122 { 0, FIXUP_DSB }, /* dsb */ 123 { 0xe320f003 }, /* wfi */ 124 { 0xe5901000 }, /* ldr r1, [r0] */ 125 { 0xe1110001 }, /* tst r1, r1 */ 126 { 0x0afffffb }, /* beq <wfi> */ 127 { 0xe12fff11 }, /* bx r1 */ 128 { 0, FIXUP_GIC_CPU_IF }, /* gic_cpu_if: .word 0x.... */ 129 { 0, FIXUP_BOOTREG }, /* bootreg_addr: .word 0x.... */ 130 { 0, FIXUP_TERMINATOR } 131 }; 132 133 void arm_write_bootloader(const char *name, 134 AddressSpace *as, hwaddr addr, 135 const ARMInsnFixup *insns, 136 const uint32_t *fixupcontext) 137 { 138 /* Fix up the specified bootloader fragment and write it into 139 * guest memory using rom_add_blob_fixed(). fixupcontext is 140 * an array giving the values to write in for the fixup types 141 * which write a value into the code array. 142 */ 143 int i, len; 144 uint32_t *code; 145 146 len = 0; 147 while (insns[len].fixup != FIXUP_TERMINATOR) { 148 len++; 149 } 150 151 code = g_new0(uint32_t, len); 152 153 for (i = 0; i < len; i++) { 154 uint32_t insn = insns[i].insn; 155 FixupType fixup = insns[i].fixup; 156 157 switch (fixup) { 158 case FIXUP_NONE: 159 break; 160 case FIXUP_BOARDID: 161 case FIXUP_BOARD_SETUP: 162 case FIXUP_ARGPTR_LO: 163 case FIXUP_ARGPTR_HI: 164 case FIXUP_ENTRYPOINT_LO: 165 case FIXUP_ENTRYPOINT_HI: 166 case FIXUP_GIC_CPU_IF: 167 case FIXUP_BOOTREG: 168 case FIXUP_DSB: 169 insn = fixupcontext[fixup]; 170 break; 171 default: 172 abort(); 173 } 174 code[i] = tswap32(insn); 175 } 176 177 assert((len * sizeof(uint32_t)) < BOOTLOADER_MAX_SIZE); 178 179 rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); 180 181 g_free(code); 182 } 183 184 static void default_write_secondary(ARMCPU *cpu, 185 const struct arm_boot_info *info) 186 { 187 uint32_t fixupcontext[FIXUP_MAX]; 188 AddressSpace *as = arm_boot_address_space(cpu, info); 189 190 fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; 191 fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; 192 if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { 193 fixupcontext[FIXUP_DSB] = DSB_INSN; 194 } else { 195 fixupcontext[FIXUP_DSB] = CP15_DSB_INSN; 196 } 197 198 arm_write_bootloader("smpboot", as, info->smp_loader_start, 199 smpboot, fixupcontext); 200 } 201 202 void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, 203 const struct arm_boot_info *info, 204 hwaddr mvbar_addr) 205 { 206 AddressSpace *as = arm_boot_address_space(cpu, info); 207 int n; 208 uint32_t mvbar_blob[] = { 209 /* mvbar_addr: secure monitor vectors 210 * Default unimplemented and unused vectors to spin. Makes it 211 * easier to debug (as opposed to the CPU running away). 212 */ 213 0xeafffffe, /* (spin) */ 214 0xeafffffe, /* (spin) */ 215 0xe1b0f00e, /* movs pc, lr ;SMC exception return */ 216 0xeafffffe, /* (spin) */ 217 0xeafffffe, /* (spin) */ 218 0xeafffffe, /* (spin) */ 219 0xeafffffe, /* (spin) */ 220 0xeafffffe, /* (spin) */ 221 }; 222 uint32_t board_setup_blob[] = { 223 /* board setup addr */ 224 0xee110f51, /* mrc p15, 0, r0, c1, c1, 2 ;read NSACR */ 225 0xe3800b03, /* orr r0, #0xc00 ;set CP11, CP10 */ 226 0xee010f51, /* mcr p15, 0, r0, c1, c1, 2 ;write NSACR */ 227 0xe3a00e00 + (mvbar_addr >> 4), /* mov r0, #mvbar_addr */ 228 0xee0c0f30, /* mcr p15, 0, r0, c12, c0, 1 ;set MVBAR */ 229 0xee110f11, /* mrc p15, 0, r0, c1 , c1, 0 ;read SCR */ 230 0xe3800031, /* orr r0, #0x31 ;enable AW, FW, NS */ 231 0xee010f11, /* mcr p15, 0, r0, c1, c1, 0 ;write SCR */ 232 0xe1a0100e, /* mov r1, lr ;save LR across SMC */ 233 0xe1600070, /* smc #0 ;call monitor to flush SCR */ 234 0xe1a0f001, /* mov pc, r1 ;return */ 235 }; 236 237 /* check that mvbar_addr is correctly aligned and relocatable (using MOV) */ 238 assert((mvbar_addr & 0x1f) == 0 && (mvbar_addr >> 4) < 0x100); 239 240 /* check that these blobs don't overlap */ 241 assert((mvbar_addr + sizeof(mvbar_blob) <= info->board_setup_addr) 242 || (info->board_setup_addr + sizeof(board_setup_blob) <= mvbar_addr)); 243 244 for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { 245 mvbar_blob[n] = tswap32(mvbar_blob[n]); 246 } 247 rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), 248 mvbar_addr, as); 249 250 for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { 251 board_setup_blob[n] = tswap32(board_setup_blob[n]); 252 } 253 rom_add_blob_fixed_as("board-setup", board_setup_blob, 254 sizeof(board_setup_blob), info->board_setup_addr, as); 255 } 256 257 static void default_reset_secondary(ARMCPU *cpu, 258 const struct arm_boot_info *info) 259 { 260 AddressSpace *as = arm_boot_address_space(cpu, info); 261 CPUState *cs = CPU(cpu); 262 263 address_space_stl_notdirty(as, info->smp_bootreg_addr, 264 0, MEMTXATTRS_UNSPECIFIED, NULL); 265 cpu_set_pc(cs, info->smp_loader_start); 266 } 267 268 static inline bool have_dtb(const struct arm_boot_info *info) 269 { 270 return info->dtb_filename || info->get_dtb; 271 } 272 273 #define WRITE_WORD(p, value) do { \ 274 address_space_stl_notdirty(as, p, value, \ 275 MEMTXATTRS_UNSPECIFIED, NULL); \ 276 p += 4; \ 277 } while (0) 278 279 static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) 280 { 281 int initrd_size = info->initrd_size; 282 hwaddr base = info->loader_start; 283 hwaddr p; 284 285 p = base + KERNEL_ARGS_ADDR; 286 /* ATAG_CORE */ 287 WRITE_WORD(p, 5); 288 WRITE_WORD(p, 0x54410001); 289 WRITE_WORD(p, 1); 290 WRITE_WORD(p, 0x1000); 291 WRITE_WORD(p, 0); 292 /* ATAG_MEM */ 293 /* TODO: handle multiple chips on one ATAG list */ 294 WRITE_WORD(p, 4); 295 WRITE_WORD(p, 0x54410002); 296 WRITE_WORD(p, info->ram_size); 297 WRITE_WORD(p, info->loader_start); 298 if (initrd_size) { 299 /* ATAG_INITRD2 */ 300 WRITE_WORD(p, 4); 301 WRITE_WORD(p, 0x54420005); 302 WRITE_WORD(p, info->initrd_start); 303 WRITE_WORD(p, initrd_size); 304 } 305 if (info->kernel_cmdline && *info->kernel_cmdline) { 306 /* ATAG_CMDLINE */ 307 int cmdline_size; 308 309 cmdline_size = strlen(info->kernel_cmdline); 310 address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, 311 info->kernel_cmdline, cmdline_size + 1); 312 cmdline_size = (cmdline_size >> 2) + 1; 313 WRITE_WORD(p, cmdline_size + 2); 314 WRITE_WORD(p, 0x54410009); 315 p += cmdline_size * 4; 316 } 317 if (info->atag_board) { 318 /* ATAG_BOARD */ 319 int atag_board_len; 320 uint8_t atag_board_buf[0x1000]; 321 322 atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; 323 WRITE_WORD(p, (atag_board_len + 8) >> 2); 324 WRITE_WORD(p, 0x414f4d50); 325 address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, 326 atag_board_buf, atag_board_len); 327 p += atag_board_len; 328 } 329 /* ATAG_END */ 330 WRITE_WORD(p, 0); 331 WRITE_WORD(p, 0); 332 } 333 334 static void set_kernel_args_old(const struct arm_boot_info *info, 335 AddressSpace *as) 336 { 337 hwaddr p; 338 const char *s; 339 int initrd_size = info->initrd_size; 340 hwaddr base = info->loader_start; 341 342 /* see linux/include/asm-arm/setup.h */ 343 p = base + KERNEL_ARGS_ADDR; 344 /* page_size */ 345 WRITE_WORD(p, 4096); 346 /* nr_pages */ 347 WRITE_WORD(p, info->ram_size / 4096); 348 /* ramdisk_size */ 349 WRITE_WORD(p, 0); 350 #define FLAG_READONLY 1 351 #define FLAG_RDLOAD 4 352 #define FLAG_RDPROMPT 8 353 /* flags */ 354 WRITE_WORD(p, FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT); 355 /* rootdev */ 356 WRITE_WORD(p, (31 << 8) | 0); /* /dev/mtdblock0 */ 357 /* video_num_cols */ 358 WRITE_WORD(p, 0); 359 /* video_num_rows */ 360 WRITE_WORD(p, 0); 361 /* video_x */ 362 WRITE_WORD(p, 0); 363 /* video_y */ 364 WRITE_WORD(p, 0); 365 /* memc_control_reg */ 366 WRITE_WORD(p, 0); 367 /* unsigned char sounddefault */ 368 /* unsigned char adfsdrives */ 369 /* unsigned char bytes_per_char_h */ 370 /* unsigned char bytes_per_char_v */ 371 WRITE_WORD(p, 0); 372 /* pages_in_bank[4] */ 373 WRITE_WORD(p, 0); 374 WRITE_WORD(p, 0); 375 WRITE_WORD(p, 0); 376 WRITE_WORD(p, 0); 377 /* pages_in_vram */ 378 WRITE_WORD(p, 0); 379 /* initrd_start */ 380 if (initrd_size) { 381 WRITE_WORD(p, info->initrd_start); 382 } else { 383 WRITE_WORD(p, 0); 384 } 385 /* initrd_size */ 386 WRITE_WORD(p, initrd_size); 387 /* rd_start */ 388 WRITE_WORD(p, 0); 389 /* system_rev */ 390 WRITE_WORD(p, 0); 391 /* system_serial_low */ 392 WRITE_WORD(p, 0); 393 /* system_serial_high */ 394 WRITE_WORD(p, 0); 395 /* mem_fclk_21285 */ 396 WRITE_WORD(p, 0); 397 /* zero unused fields */ 398 while (p < base + KERNEL_ARGS_ADDR + 256 + 1024) { 399 WRITE_WORD(p, 0); 400 } 401 s = info->kernel_cmdline; 402 if (s) { 403 address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, s, strlen(s) + 1); 404 } else { 405 WRITE_WORD(p, 0); 406 } 407 } 408 409 static int fdt_add_memory_node(void *fdt, uint32_t acells, hwaddr mem_base, 410 uint32_t scells, hwaddr mem_len, 411 int numa_node_id) 412 { 413 char *nodename; 414 int ret; 415 416 nodename = g_strdup_printf("/memory@%" PRIx64, mem_base); 417 qemu_fdt_add_subnode(fdt, nodename); 418 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 419 ret = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", acells, mem_base, 420 scells, mem_len); 421 if (ret < 0) { 422 goto out; 423 } 424 425 /* only set the NUMA ID if it is specified */ 426 if (numa_node_id >= 0) { 427 ret = qemu_fdt_setprop_cell(fdt, nodename, 428 "numa-node-id", numa_node_id); 429 } 430 out: 431 g_free(nodename); 432 return ret; 433 } 434 435 static void fdt_add_psci_node(void *fdt) 436 { 437 uint32_t cpu_suspend_fn; 438 uint32_t cpu_off_fn; 439 uint32_t cpu_on_fn; 440 uint32_t migrate_fn; 441 ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); 442 const char *psci_method; 443 int64_t psci_conduit; 444 int rc; 445 446 psci_conduit = object_property_get_int(OBJECT(armcpu), 447 "psci-conduit", 448 &error_abort); 449 switch (psci_conduit) { 450 case QEMU_PSCI_CONDUIT_DISABLED: 451 return; 452 case QEMU_PSCI_CONDUIT_HVC: 453 psci_method = "hvc"; 454 break; 455 case QEMU_PSCI_CONDUIT_SMC: 456 psci_method = "smc"; 457 break; 458 default: 459 g_assert_not_reached(); 460 } 461 462 /* 463 * A pre-existing /psci node might specify function ID values 464 * that don't match QEMU's PSCI implementation. Delete the whole 465 * node and put our own in instead. 466 */ 467 rc = fdt_path_offset(fdt, "/psci"); 468 if (rc >= 0) { 469 qemu_fdt_nop_node(fdt, "/psci"); 470 } 471 472 qemu_fdt_add_subnode(fdt, "/psci"); 473 if (armcpu->psci_version >= QEMU_PSCI_VERSION_0_2) { 474 if (armcpu->psci_version < QEMU_PSCI_VERSION_1_0) { 475 const char comp[] = "arm,psci-0.2\0arm,psci"; 476 qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); 477 } else { 478 const char comp[] = "arm,psci-1.0\0arm,psci-0.2\0arm,psci"; 479 qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); 480 } 481 482 cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; 483 if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { 484 cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; 485 cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; 486 migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; 487 } else { 488 cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; 489 cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; 490 migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; 491 } 492 } else { 493 qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); 494 495 cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; 496 cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; 497 cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; 498 migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; 499 } 500 501 /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer 502 * to the instruction that should be used to invoke PSCI functions. 503 * However, the device tree binding uses 'method' instead, so that is 504 * what we should use here. 505 */ 506 qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); 507 508 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); 509 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); 510 qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); 511 qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); 512 } 513 514 int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, 515 hwaddr addr_limit, AddressSpace *as, MachineState *ms) 516 { 517 void *fdt = NULL; 518 int size, rc, n = 0; 519 uint32_t acells, scells; 520 unsigned int i; 521 hwaddr mem_base, mem_len; 522 char **node_path; 523 Error *err = NULL; 524 525 if (binfo->dtb_filename) { 526 char *filename; 527 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename); 528 if (!filename) { 529 fprintf(stderr, "Couldn't open dtb file %s\n", binfo->dtb_filename); 530 goto fail; 531 } 532 533 fdt = load_device_tree(filename, &size); 534 if (!fdt) { 535 fprintf(stderr, "Couldn't open dtb file %s\n", filename); 536 g_free(filename); 537 goto fail; 538 } 539 g_free(filename); 540 } else { 541 fdt = binfo->get_dtb(binfo, &size); 542 if (!fdt) { 543 fprintf(stderr, "Board was unable to create a dtb blob\n"); 544 goto fail; 545 } 546 } 547 548 if (addr_limit > addr && size > (addr_limit - addr)) { 549 /* Installing the device tree blob at addr would exceed addr_limit. 550 * Whether this constitutes failure is up to the caller to decide, 551 * so just return 0 as size, i.e., no error. 552 */ 553 g_free(fdt); 554 return 0; 555 } 556 557 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells", 558 NULL, &error_fatal); 559 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells", 560 NULL, &error_fatal); 561 if (acells == 0 || scells == 0) { 562 fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n"); 563 goto fail; 564 } 565 566 if (scells < 2 && binfo->ram_size >= 4 * GiB) { 567 /* This is user error so deserves a friendlier error message 568 * than the failure of setprop_sized_cells would provide 569 */ 570 fprintf(stderr, "qemu: dtb file not compatible with " 571 "RAM size > 4GB\n"); 572 goto fail; 573 } 574 575 /* nop all root nodes matching /memory or /memory@unit-address */ 576 node_path = qemu_fdt_node_unit_path(fdt, "memory", &err); 577 if (err) { 578 error_report_err(err); 579 goto fail; 580 } 581 while (node_path[n]) { 582 if (g_str_has_prefix(node_path[n], "/memory")) { 583 qemu_fdt_nop_node(fdt, node_path[n]); 584 } 585 n++; 586 } 587 g_strfreev(node_path); 588 589 /* 590 * We drop all the memory nodes which correspond to empty NUMA nodes 591 * from the device tree, because the Linux NUMA binding document 592 * states they should not be generated. Linux will get the NUMA node 593 * IDs of the empty NUMA nodes from the distance map if they are needed. 594 * This means QEMU users may be obliged to provide command lines which 595 * configure distance maps when the empty NUMA node IDs are needed and 596 * Linux's default distance map isn't sufficient. 597 */ 598 if (ms->numa_state != NULL && ms->numa_state->num_nodes > 0) { 599 mem_base = binfo->loader_start; 600 for (i = 0; i < ms->numa_state->num_nodes; i++) { 601 mem_len = ms->numa_state->nodes[i].node_mem; 602 if (!mem_len) { 603 continue; 604 } 605 606 rc = fdt_add_memory_node(fdt, acells, mem_base, 607 scells, mem_len, i); 608 if (rc < 0) { 609 fprintf(stderr, "couldn't add /memory@%"PRIx64" node\n", 610 mem_base); 611 goto fail; 612 } 613 614 mem_base += mem_len; 615 } 616 } else { 617 rc = fdt_add_memory_node(fdt, acells, binfo->loader_start, 618 scells, binfo->ram_size, -1); 619 if (rc < 0) { 620 fprintf(stderr, "couldn't add /memory@%"PRIx64" node\n", 621 binfo->loader_start); 622 goto fail; 623 } 624 } 625 626 rc = fdt_path_offset(fdt, "/chosen"); 627 if (rc < 0) { 628 qemu_fdt_add_subnode(fdt, "/chosen"); 629 } 630 631 if (ms->kernel_cmdline && *ms->kernel_cmdline) { 632 rc = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 633 ms->kernel_cmdline); 634 if (rc < 0) { 635 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 636 goto fail; 637 } 638 } 639 640 if (binfo->initrd_size) { 641 rc = qemu_fdt_setprop_sized_cells(fdt, "/chosen", "linux,initrd-start", 642 acells, binfo->initrd_start); 643 if (rc < 0) { 644 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 645 goto fail; 646 } 647 648 rc = qemu_fdt_setprop_sized_cells(fdt, "/chosen", "linux,initrd-end", 649 acells, 650 binfo->initrd_start + 651 binfo->initrd_size); 652 if (rc < 0) { 653 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 654 goto fail; 655 } 656 } 657 658 fdt_add_psci_node(fdt); 659 660 if (binfo->modify_dtb) { 661 binfo->modify_dtb(binfo, fdt); 662 } 663 664 qemu_fdt_dumpdtb(fdt, size); 665 666 /* Put the DTB into the memory map as a ROM image: this will ensure 667 * the DTB is copied again upon reset, even if addr points into RAM. 668 */ 669 rom_add_blob_fixed_as("dtb", fdt, size, addr, as); 670 qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds, 671 rom_ptr_for_as(as, addr, size)); 672 673 if (fdt != ms->fdt) { 674 g_free(ms->fdt); 675 ms->fdt = fdt; 676 } 677 678 return size; 679 680 fail: 681 g_free(fdt); 682 return -1; 683 } 684 685 static void do_cpu_reset(void *opaque) 686 { 687 ARMCPU *cpu = opaque; 688 CPUState *cs = CPU(cpu); 689 CPUARMState *env = &cpu->env; 690 const struct arm_boot_info *info = env->boot_info; 691 692 cpu_reset(cs); 693 if (info) { 694 if (!info->is_linux) { 695 int i; 696 /* Jump to the entry point. */ 697 uint64_t entry = info->entry; 698 699 switch (info->endianness) { 700 case ARM_ENDIANNESS_LE: 701 env->cp15.sctlr_el[1] &= ~SCTLR_E0E; 702 for (i = 1; i < 4; ++i) { 703 env->cp15.sctlr_el[i] &= ~SCTLR_EE; 704 } 705 env->uncached_cpsr &= ~CPSR_E; 706 break; 707 case ARM_ENDIANNESS_BE8: 708 env->cp15.sctlr_el[1] |= SCTLR_E0E; 709 for (i = 1; i < 4; ++i) { 710 env->cp15.sctlr_el[i] |= SCTLR_EE; 711 } 712 env->uncached_cpsr |= CPSR_E; 713 break; 714 case ARM_ENDIANNESS_BE32: 715 env->cp15.sctlr_el[1] |= SCTLR_B; 716 break; 717 case ARM_ENDIANNESS_UNKNOWN: 718 break; /* Board's decision */ 719 default: 720 g_assert_not_reached(); 721 } 722 723 cpu_set_pc(cs, entry); 724 } else { 725 /* 726 * If we are booting Linux then we might need to do so at: 727 * - AArch64 NS EL2 or NS EL1 728 * - AArch32 Secure SVC (EL3) 729 * - AArch32 NS Hyp (EL2) 730 * - AArch32 NS SVC (EL1) 731 * Configure the CPU in the way boot firmware would do to 732 * drop us down to the appropriate level. 733 */ 734 int target_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; 735 736 if (env->aarch64) { 737 /* 738 * AArch64 kernels never boot in secure mode, and we don't 739 * support the secure_board_setup hook for AArch64. 740 */ 741 assert(!info->secure_boot); 742 assert(!info->secure_board_setup); 743 } else { 744 if (arm_feature(env, ARM_FEATURE_EL3) && 745 (info->secure_boot || 746 (info->secure_board_setup && cs == first_cpu))) { 747 /* Start this CPU in Secure SVC */ 748 target_el = 3; 749 } 750 } 751 752 arm_emulate_firmware_reset(cs, target_el); 753 754 if (cs == first_cpu) { 755 AddressSpace *as = arm_boot_address_space(cpu, info); 756 757 cpu_set_pc(cs, info->loader_start); 758 759 if (!have_dtb(info)) { 760 if (old_param) { 761 set_kernel_args_old(info, as); 762 } else { 763 set_kernel_args(info, as); 764 } 765 } 766 } else if (info->secondary_cpu_reset_hook) { 767 info->secondary_cpu_reset_hook(cpu, info); 768 } 769 } 770 771 if (tcg_enabled()) { 772 arm_rebuild_hflags(env); 773 } 774 } 775 } 776 777 static int do_arm_linux_init(Object *obj, void *opaque) 778 { 779 if (object_dynamic_cast(obj, TYPE_ARM_LINUX_BOOT_IF)) { 780 ARMLinuxBootIf *albif = ARM_LINUX_BOOT_IF(obj); 781 ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_GET_CLASS(obj); 782 struct arm_boot_info *info = opaque; 783 784 if (albifc->arm_linux_init) { 785 albifc->arm_linux_init(albif, info->secure_boot); 786 } 787 } 788 return 0; 789 } 790 791 static ssize_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, 792 uint64_t *lowaddr, uint64_t *highaddr, 793 int elf_machine, AddressSpace *as) 794 { 795 bool elf_is64; 796 union { 797 Elf32_Ehdr h32; 798 Elf64_Ehdr h64; 799 } elf_header; 800 int data_swab = 0; 801 bool big_endian; 802 ssize_t ret; 803 Error *err = NULL; 804 805 806 load_elf_hdr(info->kernel_filename, &elf_header, &elf_is64, &err); 807 if (err) { 808 /* 809 * If the file is not an ELF file we silently return. 810 * The caller will fall back to try other formats. 811 */ 812 error_free(err); 813 return -1; 814 } 815 816 if (elf_is64) { 817 big_endian = elf_header.h64.e_ident[EI_DATA] == ELFDATA2MSB; 818 info->endianness = big_endian ? ARM_ENDIANNESS_BE8 819 : ARM_ENDIANNESS_LE; 820 } else { 821 big_endian = elf_header.h32.e_ident[EI_DATA] == ELFDATA2MSB; 822 if (big_endian) { 823 if (bswap32(elf_header.h32.e_flags) & EF_ARM_BE8) { 824 info->endianness = ARM_ENDIANNESS_BE8; 825 } else { 826 info->endianness = ARM_ENDIANNESS_BE32; 827 /* In BE32, the CPU has a different view of the per-byte 828 * address map than the rest of the system. BE32 ELF files 829 * are organised such that they can be programmed through 830 * the CPU's per-word byte-reversed view of the world. QEMU 831 * however loads ELF files independently of the CPU. So 832 * tell the ELF loader to byte reverse the data for us. 833 */ 834 data_swab = 2; 835 } 836 } else { 837 info->endianness = ARM_ENDIANNESS_LE; 838 } 839 } 840 841 ret = load_elf_as(info->kernel_filename, NULL, NULL, NULL, 842 pentry, lowaddr, highaddr, NULL, big_endian, elf_machine, 843 1, data_swab, as); 844 if (ret <= 0) { 845 /* The header loaded but the image didn't */ 846 error_report("Couldn't load elf '%s': %s", 847 info->kernel_filename, load_elf_strerror(ret)); 848 exit(1); 849 } 850 851 return ret; 852 } 853 854 static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, 855 hwaddr *entry, AddressSpace *as) 856 { 857 hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; 858 uint64_t kernel_size = 0; 859 uint8_t *buffer; 860 int size; 861 862 /* On aarch64, it's the bootloader's job to uncompress the kernel. */ 863 size = load_image_gzipped_buffer(filename, LOAD_IMAGE_MAX_GUNZIP_BYTES, 864 &buffer); 865 866 if (size < 0) { 867 gsize len; 868 869 /* Load as raw file otherwise */ 870 if (!g_file_get_contents(filename, (char **)&buffer, &len, NULL)) { 871 return -1; 872 } 873 size = len; 874 875 /* Unpack the image if it is a EFI zboot image */ 876 if (unpack_efi_zboot_image(&buffer, &size) < 0) { 877 g_free(buffer); 878 return -1; 879 } 880 } 881 882 /* check the arm64 magic header value -- very old kernels may not have it */ 883 if (size > ARM64_MAGIC_OFFSET + 4 && 884 memcmp(buffer + ARM64_MAGIC_OFFSET, "ARM\x64", 4) == 0) { 885 uint64_t hdrvals[2]; 886 887 /* The arm64 Image header has text_offset and image_size fields at 8 and 888 * 16 bytes into the Image header, respectively. The text_offset field 889 * is only valid if the image_size is non-zero. 890 */ 891 memcpy(&hdrvals, buffer + ARM64_TEXT_OFFSET_OFFSET, sizeof(hdrvals)); 892 893 kernel_size = le64_to_cpu(hdrvals[1]); 894 895 if (kernel_size != 0) { 896 kernel_load_offset = le64_to_cpu(hdrvals[0]); 897 898 /* 899 * We write our startup "bootloader" at the very bottom of RAM, 900 * so that bit can't be used for the image. Luckily the Image 901 * format specification is that the image requests only an offset 902 * from a 2MB boundary, not an absolute load address. So if the 903 * image requests an offset that might mean it overlaps with the 904 * bootloader, we can just load it starting at 2MB+offset rather 905 * than 0MB + offset. 906 */ 907 if (kernel_load_offset < BOOTLOADER_MAX_SIZE) { 908 kernel_load_offset += 2 * MiB; 909 } 910 } 911 } 912 913 /* 914 * Kernels before v3.17 don't populate the image_size field, and 915 * raw images have no header. For those our best guess at the size 916 * is the size of the Image file itself. 917 */ 918 if (kernel_size == 0) { 919 kernel_size = size; 920 } 921 922 *entry = mem_base + kernel_load_offset; 923 rom_add_blob_fixed_as(filename, buffer, size, *entry, as); 924 925 g_free(buffer); 926 927 return kernel_size; 928 } 929 930 static void arm_setup_direct_kernel_boot(ARMCPU *cpu, 931 struct arm_boot_info *info) 932 { 933 /* Set up for a direct boot of a kernel image file. */ 934 CPUState *cs; 935 AddressSpace *as = arm_boot_address_space(cpu, info); 936 ssize_t kernel_size; 937 int initrd_size; 938 int is_linux = 0; 939 uint64_t elf_entry; 940 /* Addresses of first byte used and first byte not used by the image */ 941 uint64_t image_low_addr = 0, image_high_addr = 0; 942 int elf_machine; 943 hwaddr entry; 944 static const ARMInsnFixup *primary_loader; 945 uint64_t ram_end = info->loader_start + info->ram_size; 946 947 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { 948 primary_loader = bootloader_aarch64; 949 elf_machine = EM_AARCH64; 950 } else { 951 primary_loader = bootloader; 952 if (!info->write_board_setup) { 953 primary_loader += BOOTLOADER_NO_BOARD_SETUP_OFFSET; 954 } 955 elf_machine = EM_ARM; 956 } 957 958 /* Assume that raw images are linux kernels, and ELF images are not. */ 959 kernel_size = arm_load_elf(info, &elf_entry, &image_low_addr, 960 &image_high_addr, elf_machine, as); 961 if (kernel_size > 0 && have_dtb(info)) { 962 /* 963 * If there is still some room left at the base of RAM, try and put 964 * the DTB there like we do for images loaded with -bios or -pflash. 965 */ 966 if (image_low_addr > info->loader_start 967 || image_high_addr < info->loader_start) { 968 /* 969 * Set image_low_addr as address limit for arm_load_dtb if it may be 970 * pointing into RAM, otherwise pass '0' (no limit) 971 */ 972 if (image_low_addr < info->loader_start) { 973 image_low_addr = 0; 974 } 975 info->dtb_start = info->loader_start; 976 info->dtb_limit = image_low_addr; 977 } 978 } 979 entry = elf_entry; 980 if (kernel_size < 0) { 981 uint64_t loadaddr = info->loader_start + KERNEL_NOLOAD_ADDR; 982 kernel_size = load_uimage_as(info->kernel_filename, &entry, &loadaddr, 983 &is_linux, NULL, NULL, as); 984 if (kernel_size >= 0) { 985 image_low_addr = loadaddr; 986 image_high_addr = image_low_addr + kernel_size; 987 } 988 } 989 if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { 990 kernel_size = load_aarch64_image(info->kernel_filename, 991 info->loader_start, &entry, as); 992 is_linux = 1; 993 if (kernel_size >= 0) { 994 image_low_addr = entry; 995 image_high_addr = image_low_addr + kernel_size; 996 } 997 } else if (kernel_size < 0) { 998 /* 32-bit ARM */ 999 entry = info->loader_start + KERNEL_LOAD_ADDR; 1000 kernel_size = load_image_targphys_as(info->kernel_filename, entry, 1001 ram_end - KERNEL_LOAD_ADDR, as); 1002 is_linux = 1; 1003 if (kernel_size >= 0) { 1004 image_low_addr = entry; 1005 image_high_addr = image_low_addr + kernel_size; 1006 } 1007 } 1008 if (kernel_size < 0) { 1009 error_report("could not load kernel '%s'", info->kernel_filename); 1010 exit(1); 1011 } 1012 1013 if (kernel_size > info->ram_size) { 1014 error_report("kernel '%s' is too large to fit in RAM " 1015 "(kernel size %zd, RAM size %" PRId64 ")", 1016 info->kernel_filename, kernel_size, info->ram_size); 1017 exit(1); 1018 } 1019 1020 info->entry = entry; 1021 1022 /* 1023 * We want to put the initrd far enough into RAM that when the 1024 * kernel is uncompressed it will not clobber the initrd. However 1025 * on boards without much RAM we must ensure that we still leave 1026 * enough room for a decent sized initrd, and on boards with large 1027 * amounts of RAM we must avoid the initrd being so far up in RAM 1028 * that it is outside lowmem and inaccessible to the kernel. 1029 * So for boards with less than 256MB of RAM we put the initrd 1030 * halfway into RAM, and for boards with 256MB of RAM or more we put 1031 * the initrd at 128MB. 1032 * We also refuse to put the initrd somewhere that will definitely 1033 * overlay the kernel we just loaded, though for kernel formats which 1034 * don't tell us their exact size (eg self-decompressing 32-bit kernels) 1035 * we might still make a bad choice here. 1036 */ 1037 info->initrd_start = info->loader_start + 1038 MIN(info->ram_size / 2, 128 * MiB); 1039 if (image_high_addr) { 1040 info->initrd_start = MAX(info->initrd_start, image_high_addr); 1041 } 1042 info->initrd_start = TARGET_PAGE_ALIGN(info->initrd_start); 1043 1044 if (is_linux) { 1045 uint32_t fixupcontext[FIXUP_MAX]; 1046 1047 if (info->initrd_filename) { 1048 1049 if (info->initrd_start >= ram_end) { 1050 error_report("not enough space after kernel to load initrd"); 1051 exit(1); 1052 } 1053 1054 initrd_size = load_ramdisk_as(info->initrd_filename, 1055 info->initrd_start, 1056 ram_end - info->initrd_start, as); 1057 if (initrd_size < 0) { 1058 initrd_size = load_image_targphys_as(info->initrd_filename, 1059 info->initrd_start, 1060 ram_end - 1061 info->initrd_start, 1062 as); 1063 } 1064 if (initrd_size < 0) { 1065 error_report("could not load initrd '%s'", 1066 info->initrd_filename); 1067 exit(1); 1068 } 1069 if (info->initrd_start + initrd_size > ram_end) { 1070 error_report("could not load initrd '%s': " 1071 "too big to fit into RAM after the kernel", 1072 info->initrd_filename); 1073 exit(1); 1074 } 1075 } else { 1076 initrd_size = 0; 1077 } 1078 info->initrd_size = initrd_size; 1079 1080 fixupcontext[FIXUP_BOARDID] = info->board_id; 1081 fixupcontext[FIXUP_BOARD_SETUP] = info->board_setup_addr; 1082 1083 /* 1084 * for device tree boot, we pass the DTB directly in r2. Otherwise 1085 * we point to the kernel args. 1086 */ 1087 if (have_dtb(info)) { 1088 hwaddr align; 1089 1090 if (elf_machine == EM_AARCH64) { 1091 /* 1092 * Some AArch64 kernels on early bootup map the fdt region as 1093 * 1094 * [ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ] 1095 * 1096 * Let's play safe and prealign it to 2MB to give us some space. 1097 */ 1098 align = 2 * MiB; 1099 } else { 1100 /* 1101 * Some 32bit kernels will trash anything in the 4K page the 1102 * initrd ends in, so make sure the DTB isn't caught up in that. 1103 */ 1104 align = 4 * KiB; 1105 } 1106 1107 /* Place the DTB after the initrd in memory with alignment. */ 1108 info->dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, 1109 align); 1110 if (info->dtb_start >= ram_end) { 1111 error_report("Not enough space for DTB after kernel/initrd"); 1112 exit(1); 1113 } 1114 fixupcontext[FIXUP_ARGPTR_LO] = info->dtb_start; 1115 fixupcontext[FIXUP_ARGPTR_HI] = info->dtb_start >> 32; 1116 } else { 1117 fixupcontext[FIXUP_ARGPTR_LO] = 1118 info->loader_start + KERNEL_ARGS_ADDR; 1119 fixupcontext[FIXUP_ARGPTR_HI] = 1120 (info->loader_start + KERNEL_ARGS_ADDR) >> 32; 1121 if (info->ram_size >= 4 * GiB) { 1122 error_report("RAM size must be less than 4GB to boot" 1123 " Linux kernel using ATAGS (try passing a device tree" 1124 " using -dtb)"); 1125 exit(1); 1126 } 1127 } 1128 fixupcontext[FIXUP_ENTRYPOINT_LO] = entry; 1129 fixupcontext[FIXUP_ENTRYPOINT_HI] = entry >> 32; 1130 1131 arm_write_bootloader("bootloader", as, info->loader_start, 1132 primary_loader, fixupcontext); 1133 1134 if (info->write_board_setup) { 1135 info->write_board_setup(cpu, info); 1136 } 1137 1138 /* 1139 * Notify devices which need to fake up firmware initialization 1140 * that we're doing a direct kernel boot. 1141 */ 1142 object_child_foreach_recursive(object_get_root(), 1143 do_arm_linux_init, info); 1144 } 1145 info->is_linux = is_linux; 1146 1147 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 1148 ARM_CPU(cs)->env.boot_info = info; 1149 } 1150 } 1151 1152 static void arm_setup_firmware_boot(ARMCPU *cpu, struct arm_boot_info *info) 1153 { 1154 /* Set up for booting firmware (which might load a kernel via fw_cfg) */ 1155 1156 if (have_dtb(info)) { 1157 /* 1158 * If we have a device tree blob, but no kernel to supply it to (or 1159 * the kernel is supposed to be loaded by the bootloader), copy the 1160 * DTB to the base of RAM for the bootloader to pick up. 1161 */ 1162 info->dtb_start = info->loader_start; 1163 } 1164 1165 if (info->kernel_filename) { 1166 FWCfgState *fw_cfg; 1167 bool try_decompressing_kernel; 1168 1169 fw_cfg = fw_cfg_find(); 1170 1171 if (!fw_cfg) { 1172 error_report("This machine type does not support loading both " 1173 "a guest firmware/BIOS image and a guest kernel at " 1174 "the same time. You should change your QEMU command " 1175 "line to specify one or the other, but not both."); 1176 exit(1); 1177 } 1178 1179 try_decompressing_kernel = arm_feature(&cpu->env, 1180 ARM_FEATURE_AARCH64); 1181 1182 /* 1183 * Expose the kernel, the command line, and the initrd in fw_cfg. 1184 * We don't process them here at all, it's all left to the 1185 * firmware. 1186 */ 1187 load_image_to_fw_cfg(fw_cfg, 1188 FW_CFG_KERNEL_SIZE, FW_CFG_KERNEL_DATA, 1189 info->kernel_filename, 1190 try_decompressing_kernel); 1191 load_image_to_fw_cfg(fw_cfg, 1192 FW_CFG_INITRD_SIZE, FW_CFG_INITRD_DATA, 1193 info->initrd_filename, false); 1194 1195 if (info->kernel_cmdline) { 1196 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 1197 strlen(info->kernel_cmdline) + 1); 1198 fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, 1199 info->kernel_cmdline); 1200 } 1201 } 1202 1203 /* 1204 * We will start from address 0 (typically a boot ROM image) in the 1205 * same way as hardware. Leave env->boot_info NULL, so that 1206 * do_cpu_reset() knows it does not need to alter the PC on reset. 1207 */ 1208 } 1209 1210 void arm_load_kernel(ARMCPU *cpu, MachineState *ms, struct arm_boot_info *info) 1211 { 1212 CPUState *cs; 1213 AddressSpace *as = arm_boot_address_space(cpu, info); 1214 int boot_el; 1215 CPUARMState *env = &cpu->env; 1216 int nb_cpus = 0; 1217 1218 /* 1219 * CPU objects (unlike devices) are not automatically reset on system 1220 * reset, so we must always register a handler to do so. If we're 1221 * actually loading a kernel, the handler is also responsible for 1222 * arranging that we start it correctly. 1223 */ 1224 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 1225 qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); 1226 nb_cpus++; 1227 } 1228 1229 /* 1230 * The board code is not supposed to set secure_board_setup unless 1231 * running its code in secure mode is actually possible, and KVM 1232 * doesn't support secure. 1233 */ 1234 assert(!(info->secure_board_setup && kvm_enabled())); 1235 info->kernel_filename = ms->kernel_filename; 1236 info->kernel_cmdline = ms->kernel_cmdline; 1237 info->initrd_filename = ms->initrd_filename; 1238 info->dtb_filename = ms->dtb; 1239 info->dtb_limit = 0; 1240 1241 /* Load the kernel. */ 1242 if (!info->kernel_filename || info->firmware_loaded) { 1243 arm_setup_firmware_boot(cpu, info); 1244 } else { 1245 arm_setup_direct_kernel_boot(cpu, info); 1246 } 1247 1248 /* 1249 * Disable the PSCI conduit if it is set up to target the same 1250 * or a lower EL than the one we're going to start the guest code in. 1251 * This logic needs to agree with the code in do_cpu_reset() which 1252 * decides whether we're going to boot the guest in the highest 1253 * supported exception level or in a lower one. 1254 */ 1255 1256 /* 1257 * If PSCI is enabled, then SMC calls all go to the PSCI handler and 1258 * are never emulated to trap into guest code. It therefore does not 1259 * make sense for the board to have a setup code fragment that runs 1260 * in Secure, because this will probably need to itself issue an SMC of some 1261 * kind as part of its operation. 1262 */ 1263 assert(info->psci_conduit == QEMU_PSCI_CONDUIT_DISABLED || 1264 !info->secure_board_setup); 1265 1266 /* Boot into highest supported EL ... */ 1267 if (arm_feature(env, ARM_FEATURE_EL3)) { 1268 boot_el = 3; 1269 } else if (arm_feature(env, ARM_FEATURE_EL2)) { 1270 boot_el = 2; 1271 } else { 1272 boot_el = 1; 1273 } 1274 /* ...except that if we're booting Linux we adjust the EL we boot into */ 1275 if (info->is_linux && !info->secure_boot) { 1276 boot_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; 1277 } 1278 1279 if ((info->psci_conduit == QEMU_PSCI_CONDUIT_HVC && boot_el >= 2) || 1280 (info->psci_conduit == QEMU_PSCI_CONDUIT_SMC && boot_el == 3)) { 1281 info->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED; 1282 } 1283 1284 if (info->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED) { 1285 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 1286 Object *cpuobj = OBJECT(cs); 1287 1288 object_property_set_int(cpuobj, "psci-conduit", info->psci_conduit, 1289 &error_abort); 1290 /* 1291 * Secondary CPUs start in PSCI powered-down state. Like the 1292 * code in do_cpu_reset(), we assume first_cpu is the primary 1293 * CPU. 1294 */ 1295 if (cs != first_cpu) { 1296 object_property_set_bool(cpuobj, "start-powered-off", true, 1297 &error_abort); 1298 } 1299 } 1300 } 1301 1302 if (info->psci_conduit == QEMU_PSCI_CONDUIT_DISABLED && 1303 info->is_linux && nb_cpus > 1) { 1304 /* 1305 * We're booting Linux but not using PSCI, so for SMP we need 1306 * to write a custom secondary CPU boot loader stub, and arrange 1307 * for the secondary CPU reset to make the accompanying initialization. 1308 */ 1309 if (!info->secondary_cpu_reset_hook) { 1310 info->secondary_cpu_reset_hook = default_reset_secondary; 1311 } 1312 if (!info->write_secondary_boot) { 1313 info->write_secondary_boot = default_write_secondary; 1314 } 1315 info->write_secondary_boot(cpu, info); 1316 } else { 1317 /* 1318 * No secondary boot stub; don't use the reset hook that would 1319 * have set the CPU up to call it 1320 */ 1321 info->write_secondary_boot = NULL; 1322 info->secondary_cpu_reset_hook = NULL; 1323 } 1324 1325 /* 1326 * arm_load_dtb() may add a PSCI node so it must be called after we have 1327 * decided whether to enable PSCI and set the psci-conduit CPU properties. 1328 */ 1329 if (!info->skip_dtb_autoload && have_dtb(info)) { 1330 if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as, ms) < 0) { 1331 exit(1); 1332 } 1333 } 1334 } 1335 1336 static const TypeInfo arm_linux_boot_if_info = { 1337 .name = TYPE_ARM_LINUX_BOOT_IF, 1338 .parent = TYPE_INTERFACE, 1339 .class_size = sizeof(ARMLinuxBootIfClass), 1340 }; 1341 1342 static void arm_linux_boot_register_types(void) 1343 { 1344 type_register_static(&arm_linux_boot_if_info); 1345 } 1346 1347 type_init(arm_linux_boot_register_types) 1348