1 /* 2 * ARM kernel loader. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "config.h" 11 #include "hw/hw.h" 12 #include "hw/arm/arm.h" 13 #include "sysemu/sysemu.h" 14 #include "hw/boards.h" 15 #include "hw/loader.h" 16 #include "elf.h" 17 #include "sysemu/device_tree.h" 18 #include "qemu/config-file.h" 19 20 #define KERNEL_ARGS_ADDR 0x100 21 #define KERNEL_LOAD_ADDR 0x00010000 22 23 /* The worlds second smallest bootloader. Set r0-r2, then jump to kernel. */ 24 static uint32_t bootloader[] = { 25 0xe3a00000, /* mov r0, #0 */ 26 0xe59f1004, /* ldr r1, [pc, #4] */ 27 0xe59f2004, /* ldr r2, [pc, #4] */ 28 0xe59ff004, /* ldr pc, [pc, #4] */ 29 0, /* Board ID */ 30 0, /* Address of kernel args. Set by integratorcp_init. */ 31 0 /* Kernel entry point. Set by integratorcp_init. */ 32 }; 33 34 /* Handling for secondary CPU boot in a multicore system. 35 * Unlike the uniprocessor/primary CPU boot, this is platform 36 * dependent. The default code here is based on the secondary 37 * CPU boot protocol used on realview/vexpress boards, with 38 * some parameterisation to increase its flexibility. 39 * QEMU platform models for which this code is not appropriate 40 * should override write_secondary_boot and secondary_cpu_reset_hook 41 * instead. 42 * 43 * This code enables the interrupt controllers for the secondary 44 * CPUs and then puts all the secondary CPUs into a loop waiting 45 * for an interprocessor interrupt and polling a configurable 46 * location for the kernel secondary CPU entry point. 47 */ 48 #define DSB_INSN 0xf57ff04f 49 #define CP15_DSB_INSN 0xee070f9a /* mcr cp15, 0, r0, c7, c10, 4 */ 50 51 static uint32_t smpboot[] = { 52 0xe59f2028, /* ldr r2, gic_cpu_if */ 53 0xe59f0028, /* ldr r0, startaddr */ 54 0xe3a01001, /* mov r1, #1 */ 55 0xe5821000, /* str r1, [r2] - set GICC_CTLR.Enable */ 56 0xe3a010ff, /* mov r1, #0xff */ 57 0xe5821004, /* str r1, [r2, 4] - set GIC_PMR.Priority to 0xff */ 58 DSB_INSN, /* dsb */ 59 0xe320f003, /* wfi */ 60 0xe5901000, /* ldr r1, [r0] */ 61 0xe1110001, /* tst r1, r1 */ 62 0x0afffffb, /* beq <wfi> */ 63 0xe12fff11, /* bx r1 */ 64 0, /* gic_cpu_if: base address of GIC CPU interface */ 65 0 /* bootreg: Boot register address is held here */ 66 }; 67 68 static void default_write_secondary(ARMCPU *cpu, 69 const struct arm_boot_info *info) 70 { 71 int n; 72 smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr; 73 smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr; 74 for (n = 0; n < ARRAY_SIZE(smpboot); n++) { 75 /* Replace DSB with the pre-v7 DSB if necessary. */ 76 if (!arm_feature(&cpu->env, ARM_FEATURE_V7) && 77 smpboot[n] == DSB_INSN) { 78 smpboot[n] = CP15_DSB_INSN; 79 } 80 smpboot[n] = tswap32(smpboot[n]); 81 } 82 rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), 83 info->smp_loader_start); 84 } 85 86 static void default_reset_secondary(ARMCPU *cpu, 87 const struct arm_boot_info *info) 88 { 89 CPUARMState *env = &cpu->env; 90 91 stl_phys_notdirty(info->smp_bootreg_addr, 0); 92 env->regs[15] = info->smp_loader_start; 93 } 94 95 #define WRITE_WORD(p, value) do { \ 96 stl_phys_notdirty(p, value); \ 97 p += 4; \ 98 } while (0) 99 100 static void set_kernel_args(const struct arm_boot_info *info) 101 { 102 int initrd_size = info->initrd_size; 103 hwaddr base = info->loader_start; 104 hwaddr p; 105 106 p = base + KERNEL_ARGS_ADDR; 107 /* ATAG_CORE */ 108 WRITE_WORD(p, 5); 109 WRITE_WORD(p, 0x54410001); 110 WRITE_WORD(p, 1); 111 WRITE_WORD(p, 0x1000); 112 WRITE_WORD(p, 0); 113 /* ATAG_MEM */ 114 /* TODO: handle multiple chips on one ATAG list */ 115 WRITE_WORD(p, 4); 116 WRITE_WORD(p, 0x54410002); 117 WRITE_WORD(p, info->ram_size); 118 WRITE_WORD(p, info->loader_start); 119 if (initrd_size) { 120 /* ATAG_INITRD2 */ 121 WRITE_WORD(p, 4); 122 WRITE_WORD(p, 0x54420005); 123 WRITE_WORD(p, info->initrd_start); 124 WRITE_WORD(p, initrd_size); 125 } 126 if (info->kernel_cmdline && *info->kernel_cmdline) { 127 /* ATAG_CMDLINE */ 128 int cmdline_size; 129 130 cmdline_size = strlen(info->kernel_cmdline); 131 cpu_physical_memory_write(p + 8, info->kernel_cmdline, 132 cmdline_size + 1); 133 cmdline_size = (cmdline_size >> 2) + 1; 134 WRITE_WORD(p, cmdline_size + 2); 135 WRITE_WORD(p, 0x54410009); 136 p += cmdline_size * 4; 137 } 138 if (info->atag_board) { 139 /* ATAG_BOARD */ 140 int atag_board_len; 141 uint8_t atag_board_buf[0x1000]; 142 143 atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; 144 WRITE_WORD(p, (atag_board_len + 8) >> 2); 145 WRITE_WORD(p, 0x414f4d50); 146 cpu_physical_memory_write(p, atag_board_buf, atag_board_len); 147 p += atag_board_len; 148 } 149 /* ATAG_END */ 150 WRITE_WORD(p, 0); 151 WRITE_WORD(p, 0); 152 } 153 154 static void set_kernel_args_old(const struct arm_boot_info *info) 155 { 156 hwaddr p; 157 const char *s; 158 int initrd_size = info->initrd_size; 159 hwaddr base = info->loader_start; 160 161 /* see linux/include/asm-arm/setup.h */ 162 p = base + KERNEL_ARGS_ADDR; 163 /* page_size */ 164 WRITE_WORD(p, 4096); 165 /* nr_pages */ 166 WRITE_WORD(p, info->ram_size / 4096); 167 /* ramdisk_size */ 168 WRITE_WORD(p, 0); 169 #define FLAG_READONLY 1 170 #define FLAG_RDLOAD 4 171 #define FLAG_RDPROMPT 8 172 /* flags */ 173 WRITE_WORD(p, FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT); 174 /* rootdev */ 175 WRITE_WORD(p, (31 << 8) | 0); /* /dev/mtdblock0 */ 176 /* video_num_cols */ 177 WRITE_WORD(p, 0); 178 /* video_num_rows */ 179 WRITE_WORD(p, 0); 180 /* video_x */ 181 WRITE_WORD(p, 0); 182 /* video_y */ 183 WRITE_WORD(p, 0); 184 /* memc_control_reg */ 185 WRITE_WORD(p, 0); 186 /* unsigned char sounddefault */ 187 /* unsigned char adfsdrives */ 188 /* unsigned char bytes_per_char_h */ 189 /* unsigned char bytes_per_char_v */ 190 WRITE_WORD(p, 0); 191 /* pages_in_bank[4] */ 192 WRITE_WORD(p, 0); 193 WRITE_WORD(p, 0); 194 WRITE_WORD(p, 0); 195 WRITE_WORD(p, 0); 196 /* pages_in_vram */ 197 WRITE_WORD(p, 0); 198 /* initrd_start */ 199 if (initrd_size) { 200 WRITE_WORD(p, info->initrd_start); 201 } else { 202 WRITE_WORD(p, 0); 203 } 204 /* initrd_size */ 205 WRITE_WORD(p, initrd_size); 206 /* rd_start */ 207 WRITE_WORD(p, 0); 208 /* system_rev */ 209 WRITE_WORD(p, 0); 210 /* system_serial_low */ 211 WRITE_WORD(p, 0); 212 /* system_serial_high */ 213 WRITE_WORD(p, 0); 214 /* mem_fclk_21285 */ 215 WRITE_WORD(p, 0); 216 /* zero unused fields */ 217 while (p < base + KERNEL_ARGS_ADDR + 256 + 1024) { 218 WRITE_WORD(p, 0); 219 } 220 s = info->kernel_cmdline; 221 if (s) { 222 cpu_physical_memory_write(p, s, strlen(s) + 1); 223 } else { 224 WRITE_WORD(p, 0); 225 } 226 } 227 228 static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo) 229 { 230 void *fdt = NULL; 231 char *filename; 232 int size, rc; 233 uint32_t acells, scells; 234 235 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename); 236 if (!filename) { 237 fprintf(stderr, "Couldn't open dtb file %s\n", binfo->dtb_filename); 238 goto fail; 239 } 240 241 fdt = load_device_tree(filename, &size); 242 if (!fdt) { 243 fprintf(stderr, "Couldn't open dtb file %s\n", filename); 244 g_free(filename); 245 goto fail; 246 } 247 g_free(filename); 248 249 acells = qemu_devtree_getprop_cell(fdt, "/", "#address-cells"); 250 scells = qemu_devtree_getprop_cell(fdt, "/", "#size-cells"); 251 if (acells == 0 || scells == 0) { 252 fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n"); 253 goto fail; 254 } 255 256 if (scells < 2 && binfo->ram_size >= (1ULL << 32)) { 257 /* This is user error so deserves a friendlier error message 258 * than the failure of setprop_sized_cells would provide 259 */ 260 fprintf(stderr, "qemu: dtb file not compatible with " 261 "RAM size > 4GB\n"); 262 goto fail; 263 } 264 265 rc = qemu_devtree_setprop_sized_cells(fdt, "/memory", "reg", 266 acells, binfo->loader_start, 267 scells, binfo->ram_size); 268 if (rc < 0) { 269 fprintf(stderr, "couldn't set /memory/reg\n"); 270 goto fail; 271 } 272 273 if (binfo->kernel_cmdline && *binfo->kernel_cmdline) { 274 rc = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs", 275 binfo->kernel_cmdline); 276 if (rc < 0) { 277 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 278 goto fail; 279 } 280 } 281 282 if (binfo->initrd_size) { 283 rc = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start", 284 binfo->initrd_start); 285 if (rc < 0) { 286 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 287 goto fail; 288 } 289 290 rc = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end", 291 binfo->initrd_start + binfo->initrd_size); 292 if (rc < 0) { 293 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 294 goto fail; 295 } 296 } 297 298 if (binfo->modify_dtb) { 299 binfo->modify_dtb(binfo, fdt); 300 } 301 302 qemu_devtree_dumpdtb(fdt, size); 303 304 cpu_physical_memory_write(addr, fdt, size); 305 306 g_free(fdt); 307 308 return 0; 309 310 fail: 311 g_free(fdt); 312 return -1; 313 } 314 315 static void do_cpu_reset(void *opaque) 316 { 317 ARMCPU *cpu = opaque; 318 CPUARMState *env = &cpu->env; 319 const struct arm_boot_info *info = env->boot_info; 320 321 cpu_reset(CPU(cpu)); 322 if (info) { 323 if (!info->is_linux) { 324 /* Jump to the entry point. */ 325 env->regs[15] = info->entry & 0xfffffffe; 326 env->thumb = info->entry & 1; 327 } else { 328 if (CPU(cpu) == first_cpu) { 329 env->regs[15] = info->loader_start; 330 if (!info->dtb_filename) { 331 if (old_param) { 332 set_kernel_args_old(info); 333 } else { 334 set_kernel_args(info); 335 } 336 } 337 } else { 338 info->secondary_cpu_reset_hook(cpu, info); 339 } 340 } 341 } 342 } 343 344 void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) 345 { 346 CPUState *cs = CPU(cpu); 347 int kernel_size; 348 int initrd_size; 349 int n; 350 int is_linux = 0; 351 uint64_t elf_entry; 352 hwaddr entry; 353 int big_endian; 354 355 /* Load the kernel. */ 356 if (!info->kernel_filename) { 357 fprintf(stderr, "Kernel image must be specified\n"); 358 exit(1); 359 } 360 361 info->dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); 362 363 if (!info->secondary_cpu_reset_hook) { 364 info->secondary_cpu_reset_hook = default_reset_secondary; 365 } 366 if (!info->write_secondary_boot) { 367 info->write_secondary_boot = default_write_secondary; 368 } 369 370 if (info->nb_cpus == 0) 371 info->nb_cpus = 1; 372 373 #ifdef TARGET_WORDS_BIGENDIAN 374 big_endian = 1; 375 #else 376 big_endian = 0; 377 #endif 378 379 /* We want to put the initrd far enough into RAM that when the 380 * kernel is uncompressed it will not clobber the initrd. However 381 * on boards without much RAM we must ensure that we still leave 382 * enough room for a decent sized initrd, and on boards with large 383 * amounts of RAM we must avoid the initrd being so far up in RAM 384 * that it is outside lowmem and inaccessible to the kernel. 385 * So for boards with less than 256MB of RAM we put the initrd 386 * halfway into RAM, and for boards with 256MB of RAM or more we put 387 * the initrd at 128MB. 388 */ 389 info->initrd_start = info->loader_start + 390 MIN(info->ram_size / 2, 128 * 1024 * 1024); 391 392 /* Assume that raw images are linux kernels, and ELF images are not. */ 393 kernel_size = load_elf(info->kernel_filename, NULL, NULL, &elf_entry, 394 NULL, NULL, big_endian, ELF_MACHINE, 1); 395 entry = elf_entry; 396 if (kernel_size < 0) { 397 kernel_size = load_uimage(info->kernel_filename, &entry, NULL, 398 &is_linux); 399 } 400 if (kernel_size < 0) { 401 entry = info->loader_start + KERNEL_LOAD_ADDR; 402 kernel_size = load_image_targphys(info->kernel_filename, entry, 403 info->ram_size - KERNEL_LOAD_ADDR); 404 is_linux = 1; 405 } 406 if (kernel_size < 0) { 407 fprintf(stderr, "qemu: could not load kernel '%s'\n", 408 info->kernel_filename); 409 exit(1); 410 } 411 info->entry = entry; 412 if (is_linux) { 413 if (info->initrd_filename) { 414 initrd_size = load_ramdisk(info->initrd_filename, 415 info->initrd_start, 416 info->ram_size - 417 info->initrd_start); 418 if (initrd_size < 0) { 419 initrd_size = load_image_targphys(info->initrd_filename, 420 info->initrd_start, 421 info->ram_size - 422 info->initrd_start); 423 } 424 if (initrd_size < 0) { 425 fprintf(stderr, "qemu: could not load initrd '%s'\n", 426 info->initrd_filename); 427 exit(1); 428 } 429 } else { 430 initrd_size = 0; 431 } 432 info->initrd_size = initrd_size; 433 434 bootloader[4] = info->board_id; 435 436 /* for device tree boot, we pass the DTB directly in r2. Otherwise 437 * we point to the kernel args. 438 */ 439 if (info->dtb_filename) { 440 /* Place the DTB after the initrd in memory. Note that some 441 * kernels will trash anything in the 4K page the initrd 442 * ends in, so make sure the DTB isn't caught up in that. 443 */ 444 hwaddr dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, 445 4096); 446 if (load_dtb(dtb_start, info)) { 447 exit(1); 448 } 449 bootloader[5] = dtb_start; 450 } else { 451 bootloader[5] = info->loader_start + KERNEL_ARGS_ADDR; 452 if (info->ram_size >= (1ULL << 32)) { 453 fprintf(stderr, "qemu: RAM size must be less than 4GB to boot" 454 " Linux kernel using ATAGS (try passing a device tree" 455 " using -dtb)\n"); 456 exit(1); 457 } 458 } 459 bootloader[6] = entry; 460 for (n = 0; n < sizeof(bootloader) / 4; n++) { 461 bootloader[n] = tswap32(bootloader[n]); 462 } 463 rom_add_blob_fixed("bootloader", bootloader, sizeof(bootloader), 464 info->loader_start); 465 if (info->nb_cpus > 1) { 466 info->write_secondary_boot(cpu, info); 467 } 468 } 469 info->is_linux = is_linux; 470 471 for (; cs; cs = cs->next_cpu) { 472 cpu = ARM_CPU(cs); 473 cpu->env.boot_info = info; 474 qemu_register_reset(do_cpu_reset, cpu); 475 } 476 } 477