1 /* 2 * OpenPOWER Palmetto BMC 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12 #include "qemu/osdep.h" 13 #include "qapi/error.h" 14 #include "hw/arm/boot.h" 15 #include "hw/arm/aspeed.h" 16 #include "hw/arm/aspeed_soc.h" 17 #include "hw/arm/aspeed_eeprom.h" 18 #include "hw/block/flash.h" 19 #include "hw/i2c/i2c_mux_pca954x.h" 20 #include "hw/i2c/smbus_eeprom.h" 21 #include "hw/misc/pca9552.h" 22 #include "hw/nvram/eeprom_at24c.h" 23 #include "hw/sensor/tmp105.h" 24 #include "hw/misc/led.h" 25 #include "hw/qdev-properties.h" 26 #include "sysemu/block-backend.h" 27 #include "sysemu/reset.h" 28 #include "hw/loader.h" 29 #include "qemu/error-report.h" 30 #include "qemu/units.h" 31 #include "hw/qdev-clock.h" 32 #include "sysemu/sysemu.h" 33 34 static struct arm_boot_info aspeed_board_binfo = { 35 .board_id = -1, /* device-tree-only board */ 36 }; 37 38 struct AspeedMachineState { 39 /* Private */ 40 MachineState parent_obj; 41 /* Public */ 42 43 AspeedSoCState soc; 44 MemoryRegion boot_rom; 45 bool mmio_exec; 46 uint32_t uart_chosen; 47 char *fmc_model; 48 char *spi_model; 49 }; 50 51 /* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */ 52 #if HOST_LONG_BITS == 32 53 #define ASPEED_RAM_SIZE(sz) MIN((sz), 1 * GiB) 54 #else 55 #define ASPEED_RAM_SIZE(sz) (sz) 56 #endif 57 58 /* Palmetto hardware value: 0x120CE416 */ 59 #define PALMETTO_BMC_HW_STRAP1 ( \ 60 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \ 61 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \ 62 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 63 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ 64 SCU_HW_STRAP_VGA_CLASS_CODE | \ 65 SCU_HW_STRAP_LPC_RESET_PIN | \ 66 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ 67 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 68 SCU_HW_STRAP_SPI_WIDTH | \ 69 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 70 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 71 72 /* TODO: Find the actual hardware value */ 73 #define SUPERMICROX11_BMC_HW_STRAP1 ( \ 74 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ 75 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2) | \ 76 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 77 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ 78 SCU_HW_STRAP_VGA_CLASS_CODE | \ 79 SCU_HW_STRAP_LPC_RESET_PIN | \ 80 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ 81 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 82 SCU_HW_STRAP_SPI_WIDTH | \ 83 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 84 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 85 86 /* TODO: Find the actual hardware value */ 87 #define SUPERMICRO_X11SPI_BMC_HW_STRAP1 ( \ 88 AST2500_HW_STRAP1_DEFAULTS | \ 89 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 90 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 91 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 92 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 93 SCU_HW_STRAP_SPI_WIDTH | \ 94 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN)) 95 96 /* AST2500 evb hardware value: 0xF100C2E6 */ 97 #define AST2500_EVB_HW_STRAP1 (( \ 98 AST2500_HW_STRAP1_DEFAULTS | \ 99 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 100 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 101 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 102 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 103 SCU_HW_STRAP_MAC1_RGMII | \ 104 SCU_HW_STRAP_MAC0_RGMII) & \ 105 ~SCU_HW_STRAP_2ND_BOOT_WDT) 106 107 /* Romulus hardware value: 0xF10AD206 */ 108 #define ROMULUS_BMC_HW_STRAP1 ( \ 109 AST2500_HW_STRAP1_DEFAULTS | \ 110 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 111 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 112 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 113 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 114 SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ 115 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) 116 117 /* Sonorapass hardware value: 0xF100D216 */ 118 #define SONORAPASS_BMC_HW_STRAP1 ( \ 119 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 120 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 121 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 122 SCU_AST2500_HW_STRAP_RESERVED28 | \ 123 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 124 SCU_HW_STRAP_VGA_CLASS_CODE | \ 125 SCU_HW_STRAP_LPC_RESET_PIN | \ 126 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ 127 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 128 SCU_HW_STRAP_VGA_BIOS_ROM | \ 129 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 130 SCU_AST2500_HW_STRAP_RESERVED1) 131 132 #define G220A_BMC_HW_STRAP1 ( \ 133 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 134 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 135 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 136 SCU_AST2500_HW_STRAP_RESERVED28 | \ 137 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 138 SCU_HW_STRAP_2ND_BOOT_WDT | \ 139 SCU_HW_STRAP_VGA_CLASS_CODE | \ 140 SCU_HW_STRAP_LPC_RESET_PIN | \ 141 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ 142 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 143 SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \ 144 SCU_AST2500_HW_STRAP_RESERVED1) 145 146 /* FP5280G2 hardware value: 0XF100D286 */ 147 #define FP5280G2_BMC_HW_STRAP1 ( \ 148 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 149 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 150 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 151 SCU_AST2500_HW_STRAP_RESERVED28 | \ 152 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 153 SCU_HW_STRAP_VGA_CLASS_CODE | \ 154 SCU_HW_STRAP_LPC_RESET_PIN | \ 155 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ 156 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 157 SCU_HW_STRAP_MAC1_RGMII | \ 158 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 159 SCU_AST2500_HW_STRAP_RESERVED1) 160 161 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ 162 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 163 164 /* Quanta-Q71l hardware value */ 165 #define QUANTA_Q71L_BMC_HW_STRAP1 ( \ 166 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ 167 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2/* DDR3 with CL=6, CWL=5 */) | \ 168 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 169 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_24M_IN) | \ 170 SCU_HW_STRAP_VGA_CLASS_CODE | \ 171 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_PASS_THROUGH) | \ 172 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 173 SCU_HW_STRAP_SPI_WIDTH | \ 174 SCU_HW_STRAP_VGA_SIZE_SET(VGA_8M_DRAM) | \ 175 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 176 177 /* AST2600 evb hardware value */ 178 #define AST2600_EVB_HW_STRAP1 0x000000C0 179 #define AST2600_EVB_HW_STRAP2 0x00000003 180 181 /* Tacoma hardware value */ 182 #define TACOMA_BMC_HW_STRAP1 0x00000000 183 #define TACOMA_BMC_HW_STRAP2 0x00000040 184 185 /* Rainier hardware value: (QEMU prototype) */ 186 #define RAINIER_BMC_HW_STRAP1 0x00422016 187 #define RAINIER_BMC_HW_STRAP2 0x80000848 188 189 /* Fuji hardware value */ 190 #define FUJI_BMC_HW_STRAP1 0x00000000 191 #define FUJI_BMC_HW_STRAP2 0x00000000 192 193 /* Bletchley hardware value */ 194 /* TODO: Leave same as EVB for now. */ 195 #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 196 #define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 197 198 /* Qualcomm DC-SCM hardware value */ 199 #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 200 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 201 202 #define AST_SMP_MAILBOX_BASE 0x1e6e2180 203 #define AST_SMP_MBOX_FIELD_ENTRY (AST_SMP_MAILBOX_BASE + 0x0) 204 #define AST_SMP_MBOX_FIELD_GOSIGN (AST_SMP_MAILBOX_BASE + 0x4) 205 #define AST_SMP_MBOX_FIELD_READY (AST_SMP_MAILBOX_BASE + 0x8) 206 #define AST_SMP_MBOX_FIELD_POLLINSN (AST_SMP_MAILBOX_BASE + 0xc) 207 #define AST_SMP_MBOX_CODE (AST_SMP_MAILBOX_BASE + 0x10) 208 #define AST_SMP_MBOX_GOSIGN 0xabbaab00 209 210 static void aspeed_write_smpboot(ARMCPU *cpu, 211 const struct arm_boot_info *info) 212 { 213 AddressSpace *as = arm_boot_address_space(cpu, info); 214 static const ARMInsnFixup poll_mailbox_ready[] = { 215 /* 216 * r2 = per-cpu go sign value 217 * r1 = AST_SMP_MBOX_FIELD_ENTRY 218 * r0 = AST_SMP_MBOX_FIELD_GOSIGN 219 */ 220 { 0xee100fb0 }, /* mrc p15, 0, r0, c0, c0, 5 */ 221 { 0xe21000ff }, /* ands r0, r0, #255 */ 222 { 0xe59f201c }, /* ldr r2, [pc, #28] */ 223 { 0xe1822000 }, /* orr r2, r2, r0 */ 224 225 { 0xe59f1018 }, /* ldr r1, [pc, #24] */ 226 { 0xe59f0018 }, /* ldr r0, [pc, #24] */ 227 228 { 0xe320f002 }, /* wfe */ 229 { 0xe5904000 }, /* ldr r4, [r0] */ 230 { 0xe1520004 }, /* cmp r2, r4 */ 231 { 0x1afffffb }, /* bne <wfe> */ 232 { 0xe591f000 }, /* ldr pc, [r1] */ 233 { AST_SMP_MBOX_GOSIGN }, 234 { AST_SMP_MBOX_FIELD_ENTRY }, 235 { AST_SMP_MBOX_FIELD_GOSIGN }, 236 { 0, FIXUP_TERMINATOR } 237 }; 238 static const uint32_t fixupcontext[FIXUP_MAX] = { 0 }; 239 240 arm_write_bootloader("aspeed.smpboot", as, info->smp_loader_start, 241 poll_mailbox_ready, fixupcontext); 242 } 243 244 static void aspeed_reset_secondary(ARMCPU *cpu, 245 const struct arm_boot_info *info) 246 { 247 AddressSpace *as = arm_boot_address_space(cpu, info); 248 CPUState *cs = CPU(cpu); 249 250 /* info->smp_bootreg_addr */ 251 address_space_stl_notdirty(as, AST_SMP_MBOX_FIELD_GOSIGN, 0, 252 MEMTXATTRS_UNSPECIFIED, NULL); 253 cpu_set_pc(cs, info->smp_loader_start); 254 } 255 256 static void write_boot_rom(BlockBackend *blk, hwaddr addr, size_t rom_size, 257 Error **errp) 258 { 259 g_autofree void *storage = NULL; 260 int64_t size; 261 262 /* The block backend size should have already been 'validated' by 263 * the creation of the m25p80 object. 264 */ 265 size = blk_getlength(blk); 266 if (size <= 0) { 267 error_setg(errp, "failed to get flash size"); 268 return; 269 } 270 271 if (rom_size > size) { 272 rom_size = size; 273 } 274 275 storage = g_malloc0(rom_size); 276 if (blk_pread(blk, 0, rom_size, storage, 0) < 0) { 277 error_setg(errp, "failed to read the initial flash content"); 278 return; 279 } 280 281 rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); 282 } 283 284 /* 285 * Create a ROM and copy the flash contents at the expected address 286 * (0x0). Boots faster than execute-in-place. 287 */ 288 static void aspeed_install_boot_rom(AspeedMachineState *bmc, BlockBackend *blk, 289 uint64_t rom_size) 290 { 291 AspeedSoCState *soc = &bmc->soc; 292 293 memory_region_init_rom(&bmc->boot_rom, NULL, "aspeed.boot_rom", rom_size, 294 &error_abort); 295 memory_region_add_subregion_overlap(&soc->spi_boot_container, 0, 296 &bmc->boot_rom, 1); 297 write_boot_rom(blk, ASPEED_SOC_SPI_BOOT_ADDR, rom_size, &error_abort); 298 } 299 300 void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, 301 unsigned int count, int unit0) 302 { 303 int i; 304 305 if (!flashtype) { 306 return; 307 } 308 309 for (i = 0; i < count; ++i) { 310 DriveInfo *dinfo = drive_get(IF_MTD, 0, unit0 + i); 311 DeviceState *dev; 312 313 dev = qdev_new(flashtype); 314 if (dinfo) { 315 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo)); 316 } 317 qdev_prop_set_uint8(dev, "cs", i); 318 qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal); 319 } 320 } 321 322 static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) 323 { 324 DeviceState *card; 325 326 if (!dinfo) { 327 return; 328 } 329 card = qdev_new(TYPE_SD_CARD); 330 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 331 &error_fatal); 332 qdev_realize_and_unref(card, 333 qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), 334 &error_fatal); 335 } 336 337 static void connect_serial_hds_to_uarts(AspeedMachineState *bmc) 338 { 339 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc); 340 AspeedSoCState *s = &bmc->soc; 341 AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); 342 int uart_chosen = bmc->uart_chosen ? bmc->uart_chosen : amc->uart_default; 343 344 aspeed_soc_uart_set_chr(s, uart_chosen, serial_hd(0)); 345 for (int i = 1, uart = ASPEED_DEV_UART1; i < sc->uarts_num; i++, uart++) { 346 if (uart == uart_chosen) { 347 continue; 348 } 349 aspeed_soc_uart_set_chr(s, uart, serial_hd(i)); 350 } 351 } 352 353 static void aspeed_machine_init(MachineState *machine) 354 { 355 AspeedMachineState *bmc = ASPEED_MACHINE(machine); 356 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); 357 AspeedSoCClass *sc; 358 int i; 359 NICInfo *nd = &nd_table[0]; 360 361 object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name); 362 363 sc = ASPEED_SOC_GET_CLASS(&bmc->soc); 364 365 /* 366 * This will error out if the RAM size is not supported by the 367 * memory controller of the SoC. 368 */ 369 object_property_set_uint(OBJECT(&bmc->soc), "ram-size", machine->ram_size, 370 &error_fatal); 371 372 for (i = 0; i < sc->macs_num; i++) { 373 if ((amc->macs_mask & (1 << i)) && nd->used) { 374 qemu_check_nic_model(nd, TYPE_FTGMAC100); 375 qdev_set_nic_properties(DEVICE(&bmc->soc.ftgmac100[i]), nd); 376 nd++; 377 } 378 } 379 380 object_property_set_int(OBJECT(&bmc->soc), "hw-strap1", amc->hw_strap1, 381 &error_abort); 382 object_property_set_int(OBJECT(&bmc->soc), "hw-strap2", amc->hw_strap2, 383 &error_abort); 384 object_property_set_link(OBJECT(&bmc->soc), "memory", 385 OBJECT(get_system_memory()), &error_abort); 386 object_property_set_link(OBJECT(&bmc->soc), "dram", 387 OBJECT(machine->ram), &error_abort); 388 if (machine->kernel_filename) { 389 /* 390 * When booting with a -kernel command line there is no u-boot 391 * that runs to unlock the SCU. In this case set the default to 392 * be unlocked as the kernel expects 393 */ 394 object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key", 395 ASPEED_SCU_PROT_KEY, &error_abort); 396 } 397 connect_serial_hds_to_uarts(bmc); 398 qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort); 399 400 if (defaults_enabled()) { 401 aspeed_board_init_flashes(&bmc->soc.fmc, 402 bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, 403 amc->num_cs, 0); 404 aspeed_board_init_flashes(&bmc->soc.spi[0], 405 bmc->spi_model ? bmc->spi_model : amc->spi_model, 406 1, amc->num_cs); 407 } 408 409 if (machine->kernel_filename && sc->num_cpus > 1) { 410 /* With no u-boot we must set up a boot stub for the secondary CPU */ 411 MemoryRegion *smpboot = g_new(MemoryRegion, 1); 412 memory_region_init_ram(smpboot, NULL, "aspeed.smpboot", 413 0x80, &error_abort); 414 memory_region_add_subregion(get_system_memory(), 415 AST_SMP_MAILBOX_BASE, smpboot); 416 417 aspeed_board_binfo.write_secondary_boot = aspeed_write_smpboot; 418 aspeed_board_binfo.secondary_cpu_reset_hook = aspeed_reset_secondary; 419 aspeed_board_binfo.smp_loader_start = AST_SMP_MBOX_CODE; 420 } 421 422 aspeed_board_binfo.ram_size = machine->ram_size; 423 aspeed_board_binfo.loader_start = sc->memmap[ASPEED_DEV_SDRAM]; 424 425 if (amc->i2c_init) { 426 amc->i2c_init(bmc); 427 } 428 429 for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { 430 sdhci_attach_drive(&bmc->soc.sdhci.slots[i], 431 drive_get(IF_SD, 0, i)); 432 } 433 434 if (bmc->soc.emmc.num_slots) { 435 sdhci_attach_drive(&bmc->soc.emmc.slots[0], 436 drive_get(IF_SD, 0, bmc->soc.sdhci.num_slots)); 437 } 438 439 if (!bmc->mmio_exec) { 440 DeviceState *dev = ssi_get_cs(bmc->soc.fmc.spi, 0); 441 BlockBackend *fmc0 = dev ? m25p80_get_blk(dev) : NULL; 442 443 if (fmc0) { 444 uint64_t rom_size = memory_region_size(&bmc->soc.spi_boot); 445 aspeed_install_boot_rom(bmc, fmc0, rom_size); 446 } 447 } 448 449 arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); 450 } 451 452 static void palmetto_bmc_i2c_init(AspeedMachineState *bmc) 453 { 454 AspeedSoCState *soc = &bmc->soc; 455 DeviceState *dev; 456 uint8_t *eeprom_buf = g_malloc0(32 * 1024); 457 458 /* The palmetto platform expects a ds3231 RTC but a ds1338 is 459 * enough to provide basic RTC features. Alarms will be missing */ 460 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68); 461 462 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, 463 eeprom_buf); 464 465 /* add a TMP423 temperature sensor */ 466 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), 467 "tmp423", 0x4c)); 468 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 469 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 470 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 471 object_property_set_int(OBJECT(dev), "temperature3", 110000, &error_abort); 472 } 473 474 static void quanta_q71l_bmc_i2c_init(AspeedMachineState *bmc) 475 { 476 AspeedSoCState *soc = &bmc->soc; 477 478 /* 479 * The quanta-q71l platform expects tmp75s which are compatible with 480 * tmp105s. 481 */ 482 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4c); 483 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4e); 484 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4f); 485 486 /* TODO: i2c-1: Add baseboard FRU eeprom@54 24c64 */ 487 /* TODO: i2c-1: Add Frontpanel FRU eeprom@57 24c64 */ 488 /* TODO: Add Memory Riser i2c mux and eeproms. */ 489 490 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x74); 491 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9548", 0x77); 492 493 /* TODO: i2c-3: Add BIOS FRU eeprom@56 24c64 */ 494 495 /* i2c-7 */ 496 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70); 497 /* - i2c@0: pmbus@59 */ 498 /* - i2c@1: pmbus@58 */ 499 /* - i2c@2: pmbus@58 */ 500 /* - i2c@3: pmbus@59 */ 501 502 /* TODO: i2c-7: Add PDB FRU eeprom@52 */ 503 /* TODO: i2c-8: Add BMC FRU eeprom@50 */ 504 } 505 506 static void ast2500_evb_i2c_init(AspeedMachineState *bmc) 507 { 508 AspeedSoCState *soc = &bmc->soc; 509 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 510 511 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50, 512 eeprom_buf); 513 514 /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ 515 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), 516 TYPE_TMP105, 0x4d); 517 } 518 519 static void ast2600_evb_i2c_init(AspeedMachineState *bmc) 520 { 521 AspeedSoCState *soc = &bmc->soc; 522 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 523 524 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, 525 eeprom_buf); 526 527 /* LM75 is compatible with TMP105 driver */ 528 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), 529 TYPE_TMP105, 0x4d); 530 } 531 532 static void yosemitev2_bmc_i2c_init(AspeedMachineState *bmc) 533 { 534 AspeedSoCState *soc = &bmc->soc; 535 536 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 4), 0x51, 128 * KiB); 537 at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 128 * KiB, 538 yosemitev2_bmc_fruid, yosemitev2_bmc_fruid_len); 539 /* TMP421 */ 540 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "tmp421", 0x1f); 541 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp421", 0x4e); 542 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp421", 0x4f); 543 544 } 545 546 static void romulus_bmc_i2c_init(AspeedMachineState *bmc) 547 { 548 AspeedSoCState *soc = &bmc->soc; 549 550 /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is 551 * good enough */ 552 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); 553 } 554 555 static void tiogapass_bmc_i2c_init(AspeedMachineState *bmc) 556 { 557 AspeedSoCState *soc = &bmc->soc; 558 559 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, 128 * KiB); 560 at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 6), 0x54, 128 * KiB, 561 tiogapass_bmc_fruid, tiogapass_bmc_fruid_len); 562 /* TMP421 */ 563 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "tmp421", 0x1f); 564 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp421", 0x4f); 565 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp421", 0x4e); 566 } 567 568 static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) 569 { 570 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), 571 TYPE_PCA9552, addr); 572 } 573 574 static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) 575 { 576 AspeedSoCState *soc = &bmc->soc; 577 578 /* bus 2 : */ 579 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48); 580 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49); 581 /* bus 2 : pca9546 @ 0x73 */ 582 583 /* bus 3 : pca9548 @ 0x70 */ 584 585 /* bus 4 : */ 586 uint8_t *eeprom4_54 = g_malloc0(8 * 1024); 587 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, 588 eeprom4_54); 589 /* PCA9539 @ 0x76, but PCA9552 is compatible */ 590 create_pca9552(soc, 4, 0x76); 591 /* PCA9539 @ 0x77, but PCA9552 is compatible */ 592 create_pca9552(soc, 4, 0x77); 593 594 /* bus 6 : */ 595 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48); 596 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49); 597 /* bus 6 : pca9546 @ 0x73 */ 598 599 /* bus 8 : */ 600 uint8_t *eeprom8_56 = g_malloc0(8 * 1024); 601 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56, 602 eeprom8_56); 603 create_pca9552(soc, 8, 0x60); 604 create_pca9552(soc, 8, 0x61); 605 /* bus 8 : adc128d818 @ 0x1d */ 606 /* bus 8 : adc128d818 @ 0x1f */ 607 608 /* 609 * bus 13 : pca9548 @ 0x71 610 * - channel 3: 611 * - tmm421 @ 0x4c 612 * - tmp421 @ 0x4e 613 * - tmp421 @ 0x4f 614 */ 615 616 } 617 618 static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) 619 { 620 static const struct { 621 unsigned gpio_id; 622 LEDColor color; 623 const char *description; 624 bool gpio_polarity; 625 } pca1_leds[] = { 626 {13, LED_COLOR_GREEN, "front-fault-4", GPIO_POLARITY_ACTIVE_LOW}, 627 {14, LED_COLOR_GREEN, "front-power-3", GPIO_POLARITY_ACTIVE_LOW}, 628 {15, LED_COLOR_GREEN, "front-id-5", GPIO_POLARITY_ACTIVE_LOW}, 629 }; 630 AspeedSoCState *soc = &bmc->soc; 631 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 632 DeviceState *dev; 633 LEDState *led; 634 635 /* Bus 3: TODO bmp280@77 */ 636 dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); 637 qdev_prop_set_string(dev, "description", "pca1"); 638 i2c_slave_realize_and_unref(I2C_SLAVE(dev), 639 aspeed_i2c_get_bus(&soc->i2c, 3), 640 &error_fatal); 641 642 for (size_t i = 0; i < ARRAY_SIZE(pca1_leds); i++) { 643 led = led_create_simple(OBJECT(bmc), 644 pca1_leds[i].gpio_polarity, 645 pca1_leds[i].color, 646 pca1_leds[i].description); 647 qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id, 648 qdev_get_gpio_in(DEVICE(led), 0)); 649 } 650 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76); 651 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "max31785", 0x52); 652 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c); 653 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c); 654 655 /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ 656 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105, 657 0x4a); 658 659 /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is 660 * good enough */ 661 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); 662 663 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51, 664 eeprom_buf); 665 dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); 666 qdev_prop_set_string(dev, "description", "pca0"); 667 i2c_slave_realize_and_unref(I2C_SLAVE(dev), 668 aspeed_i2c_get_bus(&soc->i2c, 11), 669 &error_fatal); 670 /* Bus 11: TODO ucd90160@64 */ 671 } 672 673 static void g220a_bmc_i2c_init(AspeedMachineState *bmc) 674 { 675 AspeedSoCState *soc = &bmc->soc; 676 DeviceState *dev; 677 678 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), 679 "emc1413", 0x4c)); 680 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 681 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 682 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 683 684 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), 685 "emc1413", 0x4c)); 686 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 687 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 688 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 689 690 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), 691 "emc1413", 0x4c)); 692 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 693 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 694 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 695 696 static uint8_t eeprom_buf[2 * 1024] = { 697 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe, 698 0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65, 699 0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32, 700 0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42, 701 0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45, 702 0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1, 703 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, 704 }; 705 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57, 706 eeprom_buf); 707 } 708 709 static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc) 710 { 711 AspeedSoCState *soc = &bmc->soc; 712 I2CSlave *i2c_mux; 713 714 /* The at24c256 */ 715 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768); 716 717 /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */ 718 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, 719 0x48); 720 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, 721 0x49); 722 723 i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), 724 "pca9546", 0x70); 725 /* It expects a TMP112 but a TMP105 is compatible */ 726 i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105, 727 0x4a); 728 729 /* It expects a ds3232 but a ds1338 is good enough */ 730 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68); 731 732 /* It expects a pca9555 but a pca9552 is compatible */ 733 create_pca9552(soc, 8, 0x30); 734 } 735 736 static void rainier_bmc_i2c_init(AspeedMachineState *bmc) 737 { 738 AspeedSoCState *soc = &bmc->soc; 739 I2CSlave *i2c_mux; 740 741 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB); 742 743 create_pca9552(soc, 3, 0x61); 744 745 /* The rainier expects a TMP275 but a TMP105 is compatible */ 746 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 747 0x48); 748 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 749 0x49); 750 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 751 0x4a); 752 i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), 753 "pca9546", 0x70); 754 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); 755 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); 756 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB); 757 create_pca9552(soc, 4, 0x60); 758 759 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 760 0x48); 761 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 762 0x49); 763 create_pca9552(soc, 5, 0x60); 764 create_pca9552(soc, 5, 0x61); 765 i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), 766 "pca9546", 0x70); 767 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); 768 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); 769 770 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 771 0x48); 772 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 773 0x4a); 774 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 775 0x4b); 776 i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), 777 "pca9546", 0x70); 778 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); 779 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); 780 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB); 781 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB); 782 783 create_pca9552(soc, 7, 0x30); 784 create_pca9552(soc, 7, 0x31); 785 create_pca9552(soc, 7, 0x32); 786 create_pca9552(soc, 7, 0x33); 787 create_pca9552(soc, 7, 0x60); 788 create_pca9552(soc, 7, 0x61); 789 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76); 790 /* Bus 7: TODO si7021-a20@20 */ 791 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105, 792 0x48); 793 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "max31785", 0x52); 794 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, 64 * KiB); 795 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x51, 64 * KiB); 796 797 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 798 0x48); 799 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 800 0x4a); 801 at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 802 64 * KiB, rainier_bb_fruid, rainier_bb_fruid_len); 803 at24c_eeprom_init_rom(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 804 64 * KiB, rainier_bmc_fruid, rainier_bmc_fruid_len); 805 create_pca9552(soc, 8, 0x60); 806 create_pca9552(soc, 8, 0x61); 807 /* Bus 8: ucd90320@11 */ 808 /* Bus 8: ucd90320@b */ 809 /* Bus 8: ucd90320@c */ 810 811 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); 812 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4d); 813 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 9), 0x50, 128 * KiB); 814 815 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); 816 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4d); 817 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 10), 0x50, 128 * KiB); 818 819 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 820 0x48); 821 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 822 0x49); 823 i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), 824 "pca9546", 0x70); 825 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); 826 at24c_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); 827 create_pca9552(soc, 11, 0x60); 828 829 830 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB); 831 create_pca9552(soc, 13, 0x60); 832 833 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB); 834 create_pca9552(soc, 14, 0x60); 835 836 at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB); 837 create_pca9552(soc, 15, 0x60); 838 } 839 840 static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr, 841 I2CBus **channels) 842 { 843 I2CSlave *mux = i2c_slave_create_simple(bus, "pca9548", mux_addr); 844 for (int i = 0; i < 8; i++) { 845 channels[i] = pca954x_i2c_get_bus(mux, i); 846 } 847 } 848 849 #define TYPE_LM75 TYPE_TMP105 850 #define TYPE_TMP75 TYPE_TMP105 851 #define TYPE_TMP422 "tmp422" 852 853 static void fuji_bmc_i2c_init(AspeedMachineState *bmc) 854 { 855 AspeedSoCState *soc = &bmc->soc; 856 I2CBus *i2c[144] = {}; 857 858 for (int i = 0; i < 16; i++) { 859 i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); 860 } 861 I2CBus *i2c180 = i2c[2]; 862 I2CBus *i2c480 = i2c[8]; 863 I2CBus *i2c600 = i2c[11]; 864 865 get_pca9548_channels(i2c180, 0x70, &i2c[16]); 866 get_pca9548_channels(i2c480, 0x70, &i2c[24]); 867 /* NOTE: The device tree skips [32, 40) in the alias numbering */ 868 get_pca9548_channels(i2c600, 0x77, &i2c[40]); 869 get_pca9548_channels(i2c[24], 0x71, &i2c[48]); 870 get_pca9548_channels(i2c[25], 0x72, &i2c[56]); 871 get_pca9548_channels(i2c[26], 0x76, &i2c[64]); 872 get_pca9548_channels(i2c[27], 0x76, &i2c[72]); 873 for (int i = 0; i < 8; i++) { 874 get_pca9548_channels(i2c[40 + i], 0x76, &i2c[80 + i * 8]); 875 } 876 877 i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4c); 878 i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4d); 879 880 /* 881 * EEPROM 24c64 size is 64Kbits or 8 Kbytes 882 * 24c02 size is 2Kbits or 256 bytes 883 */ 884 at24c_eeprom_init(i2c[19], 0x52, 8 * KiB); 885 at24c_eeprom_init(i2c[20], 0x50, 256); 886 at24c_eeprom_init(i2c[22], 0x52, 256); 887 888 i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x48); 889 i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x49); 890 i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x4a); 891 i2c_slave_create_simple(i2c[3], TYPE_TMP422, 0x4c); 892 893 at24c_eeprom_init(i2c[8], 0x51, 8 * KiB); 894 i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x4a); 895 896 i2c_slave_create_simple(i2c[50], TYPE_LM75, 0x4c); 897 at24c_eeprom_init(i2c[50], 0x52, 8 * KiB); 898 i2c_slave_create_simple(i2c[51], TYPE_TMP75, 0x48); 899 i2c_slave_create_simple(i2c[52], TYPE_TMP75, 0x49); 900 901 i2c_slave_create_simple(i2c[59], TYPE_TMP75, 0x48); 902 i2c_slave_create_simple(i2c[60], TYPE_TMP75, 0x49); 903 904 at24c_eeprom_init(i2c[65], 0x53, 8 * KiB); 905 i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x49); 906 i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x48); 907 at24c_eeprom_init(i2c[68], 0x52, 8 * KiB); 908 at24c_eeprom_init(i2c[69], 0x52, 8 * KiB); 909 at24c_eeprom_init(i2c[70], 0x52, 8 * KiB); 910 at24c_eeprom_init(i2c[71], 0x52, 8 * KiB); 911 912 at24c_eeprom_init(i2c[73], 0x53, 8 * KiB); 913 i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x49); 914 i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x48); 915 at24c_eeprom_init(i2c[76], 0x52, 8 * KiB); 916 at24c_eeprom_init(i2c[77], 0x52, 8 * KiB); 917 at24c_eeprom_init(i2c[78], 0x52, 8 * KiB); 918 at24c_eeprom_init(i2c[79], 0x52, 8 * KiB); 919 at24c_eeprom_init(i2c[28], 0x50, 256); 920 921 for (int i = 0; i < 8; i++) { 922 at24c_eeprom_init(i2c[81 + i * 8], 0x56, 64 * KiB); 923 i2c_slave_create_simple(i2c[82 + i * 8], TYPE_TMP75, 0x48); 924 i2c_slave_create_simple(i2c[83 + i * 8], TYPE_TMP75, 0x4b); 925 i2c_slave_create_simple(i2c[84 + i * 8], TYPE_TMP75, 0x4a); 926 } 927 } 928 929 #define TYPE_TMP421 "tmp421" 930 931 static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) 932 { 933 AspeedSoCState *soc = &bmc->soc; 934 I2CBus *i2c[13] = {}; 935 for (int i = 0; i < 13; i++) { 936 if ((i == 8) || (i == 11)) { 937 continue; 938 } 939 i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); 940 } 941 942 /* Bus 0 - 5 all have the same config. */ 943 for (int i = 0; i < 6; i++) { 944 /* Missing model: ti,ina230 @ 0x45 */ 945 /* Missing model: mps,mp5023 @ 0x40 */ 946 i2c_slave_create_simple(i2c[i], TYPE_TMP421, 0x4f); 947 /* Missing model: nxp,pca9539 @ 0x76, but PCA9552 works enough */ 948 i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x76); 949 i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x67); 950 /* Missing model: fsc,fusb302 @ 0x22 */ 951 } 952 953 /* Bus 6 */ 954 at24c_eeprom_init(i2c[6], 0x56, 65536); 955 /* Missing model: nxp,pcf85263 @ 0x51 , but ds1338 works enough */ 956 i2c_slave_create_simple(i2c[6], "ds1338", 0x51); 957 958 959 /* Bus 7 */ 960 at24c_eeprom_init(i2c[7], 0x54, 65536); 961 962 /* Bus 9 */ 963 i2c_slave_create_simple(i2c[9], TYPE_TMP421, 0x4f); 964 965 /* Bus 10 */ 966 i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x4f); 967 /* Missing model: ti,hdc1080 @ 0x40 */ 968 i2c_slave_create_simple(i2c[10], TYPE_PCA9552, 0x67); 969 970 /* Bus 12 */ 971 /* Missing model: adi,adm1278 @ 0x11 */ 972 i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4c); 973 i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4d); 974 i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); 975 } 976 977 static void fby35_i2c_init(AspeedMachineState *bmc) 978 { 979 AspeedSoCState *soc = &bmc->soc; 980 I2CBus *i2c[16]; 981 982 for (int i = 0; i < 16; i++) { 983 i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); 984 } 985 986 i2c_slave_create_simple(i2c[2], TYPE_LM75, 0x4f); 987 i2c_slave_create_simple(i2c[8], TYPE_TMP421, 0x1f); 988 /* Hotswap controller is actually supposed to be mp5920 or ltc4282. */ 989 i2c_slave_create_simple(i2c[11], "adm1272", 0x44); 990 i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4e); 991 i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4f); 992 993 at24c_eeprom_init(i2c[4], 0x51, 128 * KiB); 994 at24c_eeprom_init(i2c[6], 0x51, 128 * KiB); 995 at24c_eeprom_init_rom(i2c[8], 0x50, 32 * KiB, fby35_nic_fruid, 996 fby35_nic_fruid_len); 997 at24c_eeprom_init_rom(i2c[11], 0x51, 128 * KiB, fby35_bb_fruid, 998 fby35_bb_fruid_len); 999 at24c_eeprom_init_rom(i2c[11], 0x54, 128 * KiB, fby35_bmc_fruid, 1000 fby35_bmc_fruid_len); 1001 1002 /* 1003 * TODO: There is a multi-master i2c connection to an AST1030 MiniBMC on 1004 * buses 0, 1, 2, 3, and 9. Source address 0x10, target address 0x20 on 1005 * each. 1006 */ 1007 } 1008 1009 static void qcom_dc_scm_bmc_i2c_init(AspeedMachineState *bmc) 1010 { 1011 AspeedSoCState *soc = &bmc->soc; 1012 1013 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "tmp105", 0x4d); 1014 } 1015 1016 static void qcom_dc_scm_firework_i2c_init(AspeedMachineState *bmc) 1017 { 1018 AspeedSoCState *soc = &bmc->soc; 1019 I2CSlave *therm_mux, *cpuvr_mux; 1020 1021 /* Create the generic DC-SCM hardware */ 1022 qcom_dc_scm_bmc_i2c_init(bmc); 1023 1024 /* Now create the Firework specific hardware */ 1025 1026 /* I2C7 CPUVR MUX */ 1027 cpuvr_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), 1028 "pca9546", 0x70); 1029 i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 0), "pca9548", 0x72); 1030 i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 1), "pca9548", 0x72); 1031 i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 2), "pca9548", 0x72); 1032 i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 3), "pca9548", 0x72); 1033 1034 /* I2C8 Thermal Diodes*/ 1035 therm_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), 1036 "pca9548", 0x70); 1037 i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 0), TYPE_LM75, 0x4C); 1038 i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 1), TYPE_LM75, 0x4C); 1039 i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 2), TYPE_LM75, 0x48); 1040 i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 3), TYPE_LM75, 0x48); 1041 i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 4), TYPE_LM75, 0x48); 1042 1043 /* I2C9 Fan Controller (MAX31785) */ 1044 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x52); 1045 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x54); 1046 } 1047 1048 static bool aspeed_get_mmio_exec(Object *obj, Error **errp) 1049 { 1050 return ASPEED_MACHINE(obj)->mmio_exec; 1051 } 1052 1053 static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) 1054 { 1055 ASPEED_MACHINE(obj)->mmio_exec = value; 1056 } 1057 1058 static void aspeed_machine_instance_init(Object *obj) 1059 { 1060 ASPEED_MACHINE(obj)->mmio_exec = false; 1061 } 1062 1063 static char *aspeed_get_fmc_model(Object *obj, Error **errp) 1064 { 1065 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1066 return g_strdup(bmc->fmc_model); 1067 } 1068 1069 static void aspeed_set_fmc_model(Object *obj, const char *value, Error **errp) 1070 { 1071 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1072 1073 g_free(bmc->fmc_model); 1074 bmc->fmc_model = g_strdup(value); 1075 } 1076 1077 static char *aspeed_get_spi_model(Object *obj, Error **errp) 1078 { 1079 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1080 return g_strdup(bmc->spi_model); 1081 } 1082 1083 static void aspeed_set_spi_model(Object *obj, const char *value, Error **errp) 1084 { 1085 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1086 1087 g_free(bmc->spi_model); 1088 bmc->spi_model = g_strdup(value); 1089 } 1090 1091 static char *aspeed_get_bmc_console(Object *obj, Error **errp) 1092 { 1093 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1094 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc); 1095 int uart_chosen = bmc->uart_chosen ? bmc->uart_chosen : amc->uart_default; 1096 1097 return g_strdup_printf("uart%d", uart_chosen - ASPEED_DEV_UART1 + 1); 1098 } 1099 1100 static void aspeed_set_bmc_console(Object *obj, const char *value, Error **errp) 1101 { 1102 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 1103 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc); 1104 AspeedSoCClass *sc = ASPEED_SOC_CLASS(object_class_by_name(amc->soc_name)); 1105 int val; 1106 1107 if (sscanf(value, "uart%u", &val) != 1) { 1108 error_setg(errp, "Bad value for \"uart\" property"); 1109 return; 1110 } 1111 1112 /* The number of UART depends on the SoC */ 1113 if (val < 1 || val > sc->uarts_num) { 1114 error_setg(errp, "\"uart\" should be in range [1 - %d]", sc->uarts_num); 1115 return; 1116 } 1117 bmc->uart_chosen = ASPEED_DEV_UART1 + val - 1; 1118 } 1119 1120 static void aspeed_machine_class_props_init(ObjectClass *oc) 1121 { 1122 object_class_property_add_bool(oc, "execute-in-place", 1123 aspeed_get_mmio_exec, 1124 aspeed_set_mmio_exec); 1125 object_class_property_set_description(oc, "execute-in-place", 1126 "boot directly from CE0 flash device"); 1127 1128 object_class_property_add_str(oc, "bmc-console", aspeed_get_bmc_console, 1129 aspeed_set_bmc_console); 1130 object_class_property_set_description(oc, "bmc-console", 1131 "Change the default UART to \"uartX\""); 1132 1133 object_class_property_add_str(oc, "fmc-model", aspeed_get_fmc_model, 1134 aspeed_set_fmc_model); 1135 object_class_property_set_description(oc, "fmc-model", 1136 "Change the FMC Flash model"); 1137 object_class_property_add_str(oc, "spi-model", aspeed_get_spi_model, 1138 aspeed_set_spi_model); 1139 object_class_property_set_description(oc, "spi-model", 1140 "Change the SPI Flash model"); 1141 } 1142 1143 static int aspeed_soc_num_cpus(const char *soc_name) 1144 { 1145 AspeedSoCClass *sc = ASPEED_SOC_CLASS(object_class_by_name(soc_name)); 1146 return sc->num_cpus; 1147 } 1148 1149 static void aspeed_machine_class_init(ObjectClass *oc, void *data) 1150 { 1151 MachineClass *mc = MACHINE_CLASS(oc); 1152 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1153 1154 mc->init = aspeed_machine_init; 1155 mc->no_floppy = 1; 1156 mc->no_cdrom = 1; 1157 mc->no_parallel = 1; 1158 mc->default_ram_id = "ram"; 1159 amc->macs_mask = ASPEED_MAC0_ON; 1160 amc->uart_default = ASPEED_DEV_UART5; 1161 1162 aspeed_machine_class_props_init(oc); 1163 } 1164 1165 static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) 1166 { 1167 MachineClass *mc = MACHINE_CLASS(oc); 1168 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1169 1170 mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)"; 1171 amc->soc_name = "ast2400-a1"; 1172 amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1; 1173 amc->fmc_model = "n25q256a"; 1174 amc->spi_model = "mx25l25635f"; 1175 amc->num_cs = 1; 1176 amc->i2c_init = palmetto_bmc_i2c_init; 1177 mc->default_ram_size = 256 * MiB; 1178 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1179 aspeed_soc_num_cpus(amc->soc_name); 1180 }; 1181 1182 static void aspeed_machine_quanta_q71l_class_init(ObjectClass *oc, void *data) 1183 { 1184 MachineClass *mc = MACHINE_CLASS(oc); 1185 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1186 1187 mc->desc = "Quanta-Q71l BMC (ARM926EJ-S)"; 1188 amc->soc_name = "ast2400-a1"; 1189 amc->hw_strap1 = QUANTA_Q71L_BMC_HW_STRAP1; 1190 amc->fmc_model = "n25q256a"; 1191 amc->spi_model = "mx25l25635e"; 1192 amc->num_cs = 1; 1193 amc->i2c_init = quanta_q71l_bmc_i2c_init; 1194 mc->default_ram_size = 128 * MiB; 1195 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1196 aspeed_soc_num_cpus(amc->soc_name); 1197 } 1198 1199 static void aspeed_machine_supermicrox11_bmc_class_init(ObjectClass *oc, 1200 void *data) 1201 { 1202 MachineClass *mc = MACHINE_CLASS(oc); 1203 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1204 1205 mc->desc = "Supermicro X11 BMC (ARM926EJ-S)"; 1206 amc->soc_name = "ast2400-a1"; 1207 amc->hw_strap1 = SUPERMICROX11_BMC_HW_STRAP1; 1208 amc->fmc_model = "mx25l25635e"; 1209 amc->spi_model = "mx25l25635e"; 1210 amc->num_cs = 1; 1211 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; 1212 amc->i2c_init = palmetto_bmc_i2c_init; 1213 mc->default_ram_size = 256 * MiB; 1214 } 1215 1216 static void aspeed_machine_supermicro_x11spi_bmc_class_init(ObjectClass *oc, 1217 void *data) 1218 { 1219 MachineClass *mc = MACHINE_CLASS(oc); 1220 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1221 1222 mc->desc = "Supermicro X11 SPI BMC (ARM1176)"; 1223 amc->soc_name = "ast2500-a1"; 1224 amc->hw_strap1 = SUPERMICRO_X11SPI_BMC_HW_STRAP1; 1225 amc->fmc_model = "mx25l25635e"; 1226 amc->spi_model = "mx25l25635e"; 1227 amc->num_cs = 1; 1228 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; 1229 amc->i2c_init = palmetto_bmc_i2c_init; 1230 mc->default_ram_size = 512 * MiB; 1231 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1232 aspeed_soc_num_cpus(amc->soc_name); 1233 } 1234 1235 static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) 1236 { 1237 MachineClass *mc = MACHINE_CLASS(oc); 1238 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1239 1240 mc->desc = "Aspeed AST2500 EVB (ARM1176)"; 1241 amc->soc_name = "ast2500-a1"; 1242 amc->hw_strap1 = AST2500_EVB_HW_STRAP1; 1243 amc->fmc_model = "mx25l25635e"; 1244 amc->spi_model = "mx25l25635f"; 1245 amc->num_cs = 1; 1246 amc->i2c_init = ast2500_evb_i2c_init; 1247 mc->default_ram_size = 512 * MiB; 1248 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1249 aspeed_soc_num_cpus(amc->soc_name); 1250 }; 1251 1252 static void aspeed_machine_yosemitev2_class_init(ObjectClass *oc, void *data) 1253 { 1254 MachineClass *mc = MACHINE_CLASS(oc); 1255 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1256 1257 mc->desc = "Facebook YosemiteV2 BMC (ARM1176)"; 1258 amc->soc_name = "ast2500-a1"; 1259 amc->hw_strap1 = AST2500_EVB_HW_STRAP1; 1260 amc->hw_strap2 = 0; 1261 amc->fmc_model = "n25q256a"; 1262 amc->spi_model = "mx25l25635e"; 1263 amc->num_cs = 2; 1264 amc->i2c_init = yosemitev2_bmc_i2c_init; 1265 mc->default_ram_size = 512 * MiB; 1266 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1267 aspeed_soc_num_cpus(amc->soc_name); 1268 }; 1269 1270 static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) 1271 { 1272 MachineClass *mc = MACHINE_CLASS(oc); 1273 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1274 1275 mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; 1276 amc->soc_name = "ast2500-a1"; 1277 amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; 1278 amc->fmc_model = "n25q256a"; 1279 amc->spi_model = "mx66l1g45g"; 1280 amc->num_cs = 2; 1281 amc->i2c_init = romulus_bmc_i2c_init; 1282 mc->default_ram_size = 512 * MiB; 1283 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1284 aspeed_soc_num_cpus(amc->soc_name); 1285 }; 1286 1287 static void aspeed_machine_tiogapass_class_init(ObjectClass *oc, void *data) 1288 { 1289 MachineClass *mc = MACHINE_CLASS(oc); 1290 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1291 1292 mc->desc = "Facebook Tiogapass BMC (ARM1176)"; 1293 amc->soc_name = "ast2500-a1"; 1294 amc->hw_strap1 = AST2500_EVB_HW_STRAP1; 1295 amc->hw_strap2 = 0; 1296 amc->fmc_model = "n25q256a"; 1297 amc->spi_model = "mx25l25635e"; 1298 amc->num_cs = 2; 1299 amc->i2c_init = tiogapass_bmc_i2c_init; 1300 mc->default_ram_size = 1 * GiB; 1301 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1302 aspeed_soc_num_cpus(amc->soc_name); 1303 aspeed_soc_num_cpus(amc->soc_name); 1304 }; 1305 1306 static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data) 1307 { 1308 MachineClass *mc = MACHINE_CLASS(oc); 1309 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1310 1311 mc->desc = "OCP SonoraPass BMC (ARM1176)"; 1312 amc->soc_name = "ast2500-a1"; 1313 amc->hw_strap1 = SONORAPASS_BMC_HW_STRAP1; 1314 amc->fmc_model = "mx66l1g45g"; 1315 amc->spi_model = "mx66l1g45g"; 1316 amc->num_cs = 2; 1317 amc->i2c_init = sonorapass_bmc_i2c_init; 1318 mc->default_ram_size = 512 * MiB; 1319 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1320 aspeed_soc_num_cpus(amc->soc_name); 1321 }; 1322 1323 static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data) 1324 { 1325 MachineClass *mc = MACHINE_CLASS(oc); 1326 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1327 1328 mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; 1329 amc->soc_name = "ast2500-a1"; 1330 amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1; 1331 amc->fmc_model = "mx25l25635f"; 1332 amc->spi_model = "mx66l1g45g"; 1333 amc->num_cs = 2; 1334 amc->i2c_init = witherspoon_bmc_i2c_init; 1335 mc->default_ram_size = 512 * MiB; 1336 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1337 aspeed_soc_num_cpus(amc->soc_name); 1338 }; 1339 1340 static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) 1341 { 1342 MachineClass *mc = MACHINE_CLASS(oc); 1343 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1344 1345 mc->desc = "Aspeed AST2600 EVB (Cortex-A7)"; 1346 amc->soc_name = "ast2600-a3"; 1347 amc->hw_strap1 = AST2600_EVB_HW_STRAP1; 1348 amc->hw_strap2 = AST2600_EVB_HW_STRAP2; 1349 amc->fmc_model = "mx66u51235f"; 1350 amc->spi_model = "mx66u51235f"; 1351 amc->num_cs = 1; 1352 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON | 1353 ASPEED_MAC3_ON; 1354 amc->i2c_init = ast2600_evb_i2c_init; 1355 mc->default_ram_size = 1 * GiB; 1356 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1357 aspeed_soc_num_cpus(amc->soc_name); 1358 }; 1359 1360 static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) 1361 { 1362 MachineClass *mc = MACHINE_CLASS(oc); 1363 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1364 1365 mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)"; 1366 amc->soc_name = "ast2600-a3"; 1367 amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; 1368 amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; 1369 amc->fmc_model = "mx66l1g45g"; 1370 amc->spi_model = "mx66l1g45g"; 1371 amc->num_cs = 2; 1372 amc->macs_mask = ASPEED_MAC2_ON; 1373 amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */ 1374 mc->default_ram_size = 1 * GiB; 1375 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1376 aspeed_soc_num_cpus(amc->soc_name); 1377 }; 1378 1379 static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) 1380 { 1381 MachineClass *mc = MACHINE_CLASS(oc); 1382 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1383 1384 mc->desc = "Bytedance G220A BMC (ARM1176)"; 1385 amc->soc_name = "ast2500-a1"; 1386 amc->hw_strap1 = G220A_BMC_HW_STRAP1; 1387 amc->fmc_model = "n25q512a"; 1388 amc->spi_model = "mx25l25635e"; 1389 amc->num_cs = 2; 1390 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; 1391 amc->i2c_init = g220a_bmc_i2c_init; 1392 mc->default_ram_size = 1024 * MiB; 1393 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1394 aspeed_soc_num_cpus(amc->soc_name); 1395 }; 1396 1397 static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc, void *data) 1398 { 1399 MachineClass *mc = MACHINE_CLASS(oc); 1400 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1401 1402 mc->desc = "Inspur FP5280G2 BMC (ARM1176)"; 1403 amc->soc_name = "ast2500-a1"; 1404 amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1; 1405 amc->fmc_model = "n25q512a"; 1406 amc->spi_model = "mx25l25635e"; 1407 amc->num_cs = 2; 1408 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; 1409 amc->i2c_init = fp5280g2_bmc_i2c_init; 1410 mc->default_ram_size = 512 * MiB; 1411 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1412 aspeed_soc_num_cpus(amc->soc_name); 1413 }; 1414 1415 static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) 1416 { 1417 MachineClass *mc = MACHINE_CLASS(oc); 1418 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1419 1420 mc->desc = "IBM Rainier BMC (Cortex-A7)"; 1421 amc->soc_name = "ast2600-a3"; 1422 amc->hw_strap1 = RAINIER_BMC_HW_STRAP1; 1423 amc->hw_strap2 = RAINIER_BMC_HW_STRAP2; 1424 amc->fmc_model = "mx66l1g45g"; 1425 amc->spi_model = "mx66l1g45g"; 1426 amc->num_cs = 2; 1427 amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; 1428 amc->i2c_init = rainier_bmc_i2c_init; 1429 mc->default_ram_size = 1 * GiB; 1430 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1431 aspeed_soc_num_cpus(amc->soc_name); 1432 }; 1433 1434 #define FUJI_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) 1435 1436 static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data) 1437 { 1438 MachineClass *mc = MACHINE_CLASS(oc); 1439 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1440 1441 mc->desc = "Facebook Fuji BMC (Cortex-A7)"; 1442 amc->soc_name = "ast2600-a3"; 1443 amc->hw_strap1 = FUJI_BMC_HW_STRAP1; 1444 amc->hw_strap2 = FUJI_BMC_HW_STRAP2; 1445 amc->fmc_model = "mx66l1g45g"; 1446 amc->spi_model = "mx66l1g45g"; 1447 amc->num_cs = 2; 1448 amc->macs_mask = ASPEED_MAC3_ON; 1449 amc->i2c_init = fuji_bmc_i2c_init; 1450 amc->uart_default = ASPEED_DEV_UART1; 1451 mc->default_ram_size = FUJI_BMC_RAM_SIZE; 1452 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1453 aspeed_soc_num_cpus(amc->soc_name); 1454 }; 1455 1456 #define BLETCHLEY_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB) 1457 1458 static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data) 1459 { 1460 MachineClass *mc = MACHINE_CLASS(oc); 1461 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1462 1463 mc->desc = "Facebook Bletchley BMC (Cortex-A7)"; 1464 amc->soc_name = "ast2600-a3"; 1465 amc->hw_strap1 = BLETCHLEY_BMC_HW_STRAP1; 1466 amc->hw_strap2 = BLETCHLEY_BMC_HW_STRAP2; 1467 amc->fmc_model = "w25q01jvq"; 1468 amc->spi_model = NULL; 1469 amc->num_cs = 2; 1470 amc->macs_mask = ASPEED_MAC2_ON; 1471 amc->i2c_init = bletchley_bmc_i2c_init; 1472 mc->default_ram_size = BLETCHLEY_BMC_RAM_SIZE; 1473 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1474 aspeed_soc_num_cpus(amc->soc_name); 1475 } 1476 1477 static void fby35_reset(MachineState *state, ShutdownCause reason) 1478 { 1479 AspeedMachineState *bmc = ASPEED_MACHINE(state); 1480 AspeedGPIOState *gpio = &bmc->soc.gpio; 1481 1482 qemu_devices_reset(reason); 1483 1484 /* Board ID: 7 (Class-1, 4 slots) */ 1485 object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal); 1486 object_property_set_bool(OBJECT(gpio), "gpioV5", true, &error_fatal); 1487 object_property_set_bool(OBJECT(gpio), "gpioV6", true, &error_fatal); 1488 object_property_set_bool(OBJECT(gpio), "gpioV7", false, &error_fatal); 1489 1490 /* Slot presence pins, inverse polarity. (False means present) */ 1491 object_property_set_bool(OBJECT(gpio), "gpioH4", false, &error_fatal); 1492 object_property_set_bool(OBJECT(gpio), "gpioH5", true, &error_fatal); 1493 object_property_set_bool(OBJECT(gpio), "gpioH6", true, &error_fatal); 1494 object_property_set_bool(OBJECT(gpio), "gpioH7", true, &error_fatal); 1495 1496 /* Slot 12v power pins, normal polarity. (True means powered-on) */ 1497 object_property_set_bool(OBJECT(gpio), "gpioB2", true, &error_fatal); 1498 object_property_set_bool(OBJECT(gpio), "gpioB3", false, &error_fatal); 1499 object_property_set_bool(OBJECT(gpio), "gpioB4", false, &error_fatal); 1500 object_property_set_bool(OBJECT(gpio), "gpioB5", false, &error_fatal); 1501 } 1502 1503 static void aspeed_machine_fby35_class_init(ObjectClass *oc, void *data) 1504 { 1505 MachineClass *mc = MACHINE_CLASS(oc); 1506 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1507 1508 mc->desc = "Facebook fby35 BMC (Cortex-A7)"; 1509 mc->reset = fby35_reset; 1510 amc->fmc_model = "mx66l1g45g"; 1511 amc->num_cs = 2; 1512 amc->macs_mask = ASPEED_MAC3_ON; 1513 amc->i2c_init = fby35_i2c_init; 1514 /* FIXME: Replace this macro with something more general */ 1515 mc->default_ram_size = FUJI_BMC_RAM_SIZE; 1516 } 1517 1518 #define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024) 1519 /* Main SYSCLK frequency in Hz (200MHz) */ 1520 #define SYSCLK_FRQ 200000000ULL 1521 1522 static void aspeed_minibmc_machine_init(MachineState *machine) 1523 { 1524 AspeedMachineState *bmc = ASPEED_MACHINE(machine); 1525 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); 1526 Clock *sysclk; 1527 1528 sysclk = clock_new(OBJECT(machine), "SYSCLK"); 1529 clock_set_hz(sysclk, SYSCLK_FRQ); 1530 1531 object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name); 1532 qdev_connect_clock_in(DEVICE(&bmc->soc), "sysclk", sysclk); 1533 1534 object_property_set_link(OBJECT(&bmc->soc), "memory", 1535 OBJECT(get_system_memory()), &error_abort); 1536 connect_serial_hds_to_uarts(bmc); 1537 qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort); 1538 1539 aspeed_board_init_flashes(&bmc->soc.fmc, 1540 bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, 1541 amc->num_cs, 1542 0); 1543 1544 aspeed_board_init_flashes(&bmc->soc.spi[0], 1545 bmc->spi_model ? bmc->spi_model : amc->spi_model, 1546 amc->num_cs, amc->num_cs); 1547 1548 aspeed_board_init_flashes(&bmc->soc.spi[1], 1549 bmc->spi_model ? bmc->spi_model : amc->spi_model, 1550 amc->num_cs, (amc->num_cs * 2)); 1551 1552 if (amc->i2c_init) { 1553 amc->i2c_init(bmc); 1554 } 1555 1556 armv7m_load_kernel(ARM_CPU(first_cpu), 1557 machine->kernel_filename, 1558 0, 1559 AST1030_INTERNAL_FLASH_SIZE); 1560 } 1561 1562 static void ast1030_evb_i2c_init(AspeedMachineState *bmc) 1563 { 1564 AspeedSoCState *soc = &bmc->soc; 1565 1566 /* U10 24C08 connects to SDA/SCL Group 1 by default */ 1567 uint8_t *eeprom_buf = g_malloc0(32 * 1024); 1568 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf); 1569 1570 /* U11 LM75 connects to SDA/SCL Group 2 by default */ 1571 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4d); 1572 } 1573 1574 static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc, 1575 void *data) 1576 { 1577 MachineClass *mc = MACHINE_CLASS(oc); 1578 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1579 1580 mc->desc = "Aspeed AST1030 MiniBMC (Cortex-M4)"; 1581 amc->soc_name = "ast1030-a1"; 1582 amc->hw_strap1 = 0; 1583 amc->hw_strap2 = 0; 1584 mc->init = aspeed_minibmc_machine_init; 1585 amc->i2c_init = ast1030_evb_i2c_init; 1586 mc->default_ram_size = 0; 1587 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1; 1588 amc->fmc_model = "sst25vf032b"; 1589 amc->spi_model = "sst25vf032b"; 1590 amc->num_cs = 2; 1591 amc->macs_mask = 0; 1592 } 1593 1594 static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc, 1595 void *data) 1596 { 1597 MachineClass *mc = MACHINE_CLASS(oc); 1598 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1599 1600 mc->desc = "Qualcomm DC-SCM V1 BMC (Cortex A7)"; 1601 amc->soc_name = "ast2600-a3"; 1602 amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1; 1603 amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2; 1604 amc->fmc_model = "n25q512a"; 1605 amc->spi_model = "n25q512a"; 1606 amc->num_cs = 2; 1607 amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; 1608 amc->i2c_init = qcom_dc_scm_bmc_i2c_init; 1609 mc->default_ram_size = 1 * GiB; 1610 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1611 aspeed_soc_num_cpus(amc->soc_name); 1612 }; 1613 1614 static void aspeed_machine_qcom_firework_class_init(ObjectClass *oc, 1615 void *data) 1616 { 1617 MachineClass *mc = MACHINE_CLASS(oc); 1618 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1619 1620 mc->desc = "Qualcomm DC-SCM V1/Firework BMC (Cortex A7)"; 1621 amc->soc_name = "ast2600-a3"; 1622 amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1; 1623 amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2; 1624 amc->fmc_model = "n25q512a"; 1625 amc->spi_model = "n25q512a"; 1626 amc->num_cs = 2; 1627 amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; 1628 amc->i2c_init = qcom_dc_scm_firework_i2c_init; 1629 mc->default_ram_size = 1 * GiB; 1630 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1631 aspeed_soc_num_cpus(amc->soc_name); 1632 }; 1633 1634 static const TypeInfo aspeed_machine_types[] = { 1635 { 1636 .name = MACHINE_TYPE_NAME("palmetto-bmc"), 1637 .parent = TYPE_ASPEED_MACHINE, 1638 .class_init = aspeed_machine_palmetto_class_init, 1639 }, { 1640 .name = MACHINE_TYPE_NAME("supermicrox11-bmc"), 1641 .parent = TYPE_ASPEED_MACHINE, 1642 .class_init = aspeed_machine_supermicrox11_bmc_class_init, 1643 }, { 1644 .name = MACHINE_TYPE_NAME("supermicro-x11spi-bmc"), 1645 .parent = TYPE_ASPEED_MACHINE, 1646 .class_init = aspeed_machine_supermicro_x11spi_bmc_class_init, 1647 }, { 1648 .name = MACHINE_TYPE_NAME("ast2500-evb"), 1649 .parent = TYPE_ASPEED_MACHINE, 1650 .class_init = aspeed_machine_ast2500_evb_class_init, 1651 }, { 1652 .name = MACHINE_TYPE_NAME("romulus-bmc"), 1653 .parent = TYPE_ASPEED_MACHINE, 1654 .class_init = aspeed_machine_romulus_class_init, 1655 }, { 1656 .name = MACHINE_TYPE_NAME("sonorapass-bmc"), 1657 .parent = TYPE_ASPEED_MACHINE, 1658 .class_init = aspeed_machine_sonorapass_class_init, 1659 }, { 1660 .name = MACHINE_TYPE_NAME("witherspoon-bmc"), 1661 .parent = TYPE_ASPEED_MACHINE, 1662 .class_init = aspeed_machine_witherspoon_class_init, 1663 }, { 1664 .name = MACHINE_TYPE_NAME("ast2600-evb"), 1665 .parent = TYPE_ASPEED_MACHINE, 1666 .class_init = aspeed_machine_ast2600_evb_class_init, 1667 }, { 1668 .name = MACHINE_TYPE_NAME("yosemitev2-bmc"), 1669 .parent = TYPE_ASPEED_MACHINE, 1670 .class_init = aspeed_machine_yosemitev2_class_init, 1671 }, { 1672 .name = MACHINE_TYPE_NAME("tacoma-bmc"), 1673 .parent = TYPE_ASPEED_MACHINE, 1674 .class_init = aspeed_machine_tacoma_class_init, 1675 }, { 1676 .name = MACHINE_TYPE_NAME("tiogapass-bmc"), 1677 .parent = TYPE_ASPEED_MACHINE, 1678 .class_init = aspeed_machine_tiogapass_class_init, 1679 }, { 1680 .name = MACHINE_TYPE_NAME("g220a-bmc"), 1681 .parent = TYPE_ASPEED_MACHINE, 1682 .class_init = aspeed_machine_g220a_class_init, 1683 }, { 1684 .name = MACHINE_TYPE_NAME("qcom-dc-scm-v1-bmc"), 1685 .parent = TYPE_ASPEED_MACHINE, 1686 .class_init = aspeed_machine_qcom_dc_scm_v1_class_init, 1687 }, { 1688 .name = MACHINE_TYPE_NAME("qcom-firework-bmc"), 1689 .parent = TYPE_ASPEED_MACHINE, 1690 .class_init = aspeed_machine_qcom_firework_class_init, 1691 }, { 1692 .name = MACHINE_TYPE_NAME("fp5280g2-bmc"), 1693 .parent = TYPE_ASPEED_MACHINE, 1694 .class_init = aspeed_machine_fp5280g2_class_init, 1695 }, { 1696 .name = MACHINE_TYPE_NAME("quanta-q71l-bmc"), 1697 .parent = TYPE_ASPEED_MACHINE, 1698 .class_init = aspeed_machine_quanta_q71l_class_init, 1699 }, { 1700 .name = MACHINE_TYPE_NAME("rainier-bmc"), 1701 .parent = TYPE_ASPEED_MACHINE, 1702 .class_init = aspeed_machine_rainier_class_init, 1703 }, { 1704 .name = MACHINE_TYPE_NAME("fuji-bmc"), 1705 .parent = TYPE_ASPEED_MACHINE, 1706 .class_init = aspeed_machine_fuji_class_init, 1707 }, { 1708 .name = MACHINE_TYPE_NAME("bletchley-bmc"), 1709 .parent = TYPE_ASPEED_MACHINE, 1710 .class_init = aspeed_machine_bletchley_class_init, 1711 }, { 1712 .name = MACHINE_TYPE_NAME("fby35-bmc"), 1713 .parent = MACHINE_TYPE_NAME("ast2600-evb"), 1714 .class_init = aspeed_machine_fby35_class_init, 1715 }, { 1716 .name = MACHINE_TYPE_NAME("ast1030-evb"), 1717 .parent = TYPE_ASPEED_MACHINE, 1718 .class_init = aspeed_minibmc_machine_ast1030_evb_class_init, 1719 }, { 1720 .name = TYPE_ASPEED_MACHINE, 1721 .parent = TYPE_MACHINE, 1722 .instance_size = sizeof(AspeedMachineState), 1723 .instance_init = aspeed_machine_instance_init, 1724 .class_size = sizeof(AspeedMachineClass), 1725 .class_init = aspeed_machine_class_init, 1726 .abstract = true, 1727 } 1728 }; 1729 1730 DEFINE_TYPES(aspeed_machine_types) 1731