1 /* 2 * OpenPOWER Palmetto BMC 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12 #include "qemu/osdep.h" 13 #include "qapi/error.h" 14 #include "cpu.h" 15 #include "exec/address-spaces.h" 16 #include "hw/arm/boot.h" 17 #include "hw/arm/aspeed.h" 18 #include "hw/arm/aspeed_soc.h" 19 #include "hw/boards.h" 20 #include "hw/i2c/smbus_eeprom.h" 21 #include "hw/misc/pca9552.h" 22 #include "hw/misc/tmp105.h" 23 #include "hw/qdev-properties.h" 24 #include "qemu/log.h" 25 #include "sysemu/block-backend.h" 26 #include "sysemu/sysemu.h" 27 #include "hw/loader.h" 28 #include "qemu/error-report.h" 29 #include "qemu/units.h" 30 31 static struct arm_boot_info aspeed_board_binfo = { 32 .board_id = -1, /* device-tree-only board */ 33 }; 34 35 struct AspeedBoardState { 36 AspeedSoCState soc; 37 MemoryRegion ram_container; 38 MemoryRegion ram; 39 MemoryRegion max_ram; 40 }; 41 42 /* Palmetto hardware value: 0x120CE416 */ 43 #define PALMETTO_BMC_HW_STRAP1 ( \ 44 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \ 45 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \ 46 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 47 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ 48 SCU_HW_STRAP_VGA_CLASS_CODE | \ 49 SCU_HW_STRAP_LPC_RESET_PIN | \ 50 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ 51 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 52 SCU_HW_STRAP_SPI_WIDTH | \ 53 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 54 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 55 56 /* AST2500 evb hardware value: 0xF100C2E6 */ 57 #define AST2500_EVB_HW_STRAP1 (( \ 58 AST2500_HW_STRAP1_DEFAULTS | \ 59 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 60 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 61 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 62 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 63 SCU_HW_STRAP_MAC1_RGMII | \ 64 SCU_HW_STRAP_MAC0_RGMII) & \ 65 ~SCU_HW_STRAP_2ND_BOOT_WDT) 66 67 /* Romulus hardware value: 0xF10AD206 */ 68 #define ROMULUS_BMC_HW_STRAP1 ( \ 69 AST2500_HW_STRAP1_DEFAULTS | \ 70 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 71 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 72 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 73 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 74 SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ 75 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) 76 77 /* Swift hardware value: 0xF11AD206 */ 78 #define SWIFT_BMC_HW_STRAP1 ( \ 79 AST2500_HW_STRAP1_DEFAULTS | \ 80 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 81 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 82 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 83 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 84 SCU_H_PLL_BYPASS_EN | \ 85 SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ 86 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) 87 88 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ 89 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 90 91 /* AST2600 evb hardware value */ 92 #define AST2600_EVB_HW_STRAP1 0x000000C0 93 #define AST2600_EVB_HW_STRAP2 0x00000003 94 95 /* Tacoma hardware value */ 96 #define TACOMA_BMC_HW_STRAP1 0x00000000 97 #define TACOMA_BMC_HW_STRAP2 0x00000000 98 99 /* 100 * The max ram region is for firmwares that scan the address space 101 * with load/store to guess how much RAM the SoC has. 102 */ 103 static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size) 104 { 105 return 0; 106 } 107 108 static void max_ram_write(void *opaque, hwaddr offset, uint64_t value, 109 unsigned size) 110 { 111 /* Discard writes */ 112 } 113 114 static const MemoryRegionOps max_ram_ops = { 115 .read = max_ram_read, 116 .write = max_ram_write, 117 .endianness = DEVICE_NATIVE_ENDIAN, 118 }; 119 120 #define FIRMWARE_ADDR 0x0 121 122 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, 123 Error **errp) 124 { 125 BlockBackend *blk = blk_by_legacy_dinfo(dinfo); 126 uint8_t *storage; 127 int64_t size; 128 129 /* The block backend size should have already been 'validated' by 130 * the creation of the m25p80 object. 131 */ 132 size = blk_getlength(blk); 133 if (size <= 0) { 134 error_setg(errp, "failed to get flash size"); 135 return; 136 } 137 138 if (rom_size > size) { 139 rom_size = size; 140 } 141 142 storage = g_new0(uint8_t, rom_size); 143 if (blk_pread(blk, 0, storage, rom_size) < 0) { 144 error_setg(errp, "failed to read the initial flash content"); 145 return; 146 } 147 148 rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); 149 g_free(storage); 150 } 151 152 static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, 153 Error **errp) 154 { 155 int i ; 156 157 for (i = 0; i < s->num_cs; ++i) { 158 AspeedSMCFlash *fl = &s->flashes[i]; 159 DriveInfo *dinfo = drive_get_next(IF_MTD); 160 qemu_irq cs_line; 161 162 fl->flash = ssi_create_slave_no_init(s->spi, flashtype); 163 if (dinfo) { 164 qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo), 165 errp); 166 } 167 qdev_init_nofail(fl->flash); 168 169 cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0); 170 sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line); 171 } 172 } 173 174 static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) 175 { 176 DeviceState *card; 177 178 card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), 179 TYPE_SD_CARD); 180 if (dinfo) { 181 qdev_prop_set_drive(card, "drive", blk_by_legacy_dinfo(dinfo), 182 &error_fatal); 183 } 184 object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); 185 } 186 187 static void aspeed_machine_init(MachineState *machine) 188 { 189 AspeedBoardState *bmc; 190 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); 191 AspeedSoCClass *sc; 192 DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); 193 ram_addr_t max_ram_size; 194 int i; 195 196 bmc = g_new0(AspeedBoardState, 1); 197 198 memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container", 199 UINT32_MAX); 200 201 object_initialize_child(OBJECT(machine), "soc", &bmc->soc, 202 (sizeof(bmc->soc)), amc->soc_name, &error_abort, 203 NULL); 204 205 sc = ASPEED_SOC_GET_CLASS(&bmc->soc); 206 207 object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size", 208 &error_abort); 209 object_property_set_int(OBJECT(&bmc->soc), amc->hw_strap1, "hw-strap1", 210 &error_abort); 211 object_property_set_int(OBJECT(&bmc->soc), amc->hw_strap2, "hw-strap2", 212 &error_abort); 213 object_property_set_int(OBJECT(&bmc->soc), amc->num_cs, "num-cs", 214 &error_abort); 215 object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", 216 &error_abort); 217 object_property_set_link(OBJECT(&bmc->soc), OBJECT(&bmc->ram_container), 218 "dram", &error_abort); 219 if (machine->kernel_filename) { 220 /* 221 * When booting with a -kernel command line there is no u-boot 222 * that runs to unlock the SCU. In this case set the default to 223 * be unlocked as the kernel expects 224 */ 225 object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY, 226 "hw-prot-key", &error_abort); 227 } 228 object_property_set_bool(OBJECT(&bmc->soc), true, "realized", 229 &error_abort); 230 231 /* 232 * Allocate RAM after the memory controller has checked the size 233 * was valid. If not, a default value is used. 234 */ 235 ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size", 236 &error_abort); 237 238 memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); 239 memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram); 240 memory_region_add_subregion(get_system_memory(), 241 sc->memmap[ASPEED_SDRAM], 242 &bmc->ram_container); 243 244 max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", 245 &error_abort); 246 memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, 247 "max_ram", max_ram_size - ram_size); 248 memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram); 249 250 aspeed_board_init_flashes(&bmc->soc.fmc, amc->fmc_model, &error_abort); 251 aspeed_board_init_flashes(&bmc->soc.spi[0], amc->spi_model, &error_abort); 252 253 /* Install first FMC flash content as a boot rom. */ 254 if (drive0) { 255 AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0]; 256 MemoryRegion *boot_rom = g_new(MemoryRegion, 1); 257 258 /* 259 * create a ROM region using the default mapping window size of 260 * the flash module. The window size is 64MB for the AST2400 261 * SoC and 128MB for the AST2500 SoC, which is twice as big as 262 * needed by the flash modules of the Aspeed machines. 263 */ 264 if (ASPEED_MACHINE(machine)->mmio_exec) { 265 memory_region_init_alias(boot_rom, OBJECT(bmc), "aspeed.boot_rom", 266 &fl->mmio, 0, fl->size); 267 memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, 268 boot_rom); 269 } else { 270 memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", 271 fl->size, &error_abort); 272 memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, 273 boot_rom); 274 write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); 275 } 276 } 277 278 aspeed_board_binfo.ram_size = ram_size; 279 aspeed_board_binfo.loader_start = sc->memmap[ASPEED_SDRAM]; 280 aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus; 281 282 if (amc->i2c_init) { 283 amc->i2c_init(bmc); 284 } 285 286 for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { 287 sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD)); 288 } 289 290 if (bmc->soc.emmc.num_slots) { 291 sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD)); 292 } 293 294 arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); 295 } 296 297 static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) 298 { 299 AspeedSoCState *soc = &bmc->soc; 300 DeviceState *dev; 301 uint8_t *eeprom_buf = g_malloc0(32 * 1024); 302 303 /* The palmetto platform expects a ds3231 RTC but a ds1338 is 304 * enough to provide basic RTC features. Alarms will be missing */ 305 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); 306 307 smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50, 308 eeprom_buf); 309 310 /* add a TMP423 temperature sensor */ 311 dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), 312 "tmp423", 0x4c); 313 object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort); 314 object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort); 315 object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort); 316 object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort); 317 } 318 319 static void ast2500_evb_i2c_init(AspeedBoardState *bmc) 320 { 321 AspeedSoCState *soc = &bmc->soc; 322 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 323 324 smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50, 325 eeprom_buf); 326 327 /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ 328 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), 329 TYPE_TMP105, 0x4d); 330 331 /* The AST2500 EVB does not have an RTC. Let's pretend that one is 332 * plugged on the I2C bus header */ 333 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); 334 } 335 336 static void ast2600_evb_i2c_init(AspeedBoardState *bmc) 337 { 338 /* Start with some devices on our I2C busses */ 339 ast2500_evb_i2c_init(bmc); 340 } 341 342 static void romulus_bmc_i2c_init(AspeedBoardState *bmc) 343 { 344 AspeedSoCState *soc = &bmc->soc; 345 346 /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is 347 * good enough */ 348 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); 349 } 350 351 static void swift_bmc_i2c_init(AspeedBoardState *bmc) 352 { 353 AspeedSoCState *soc = &bmc->soc; 354 355 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); 356 357 /* The swift board expects a TMP275 but a TMP105 is compatible */ 358 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48); 359 /* The swift board expects a pca9551 but a pca9552 is compatible */ 360 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60); 361 362 /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ 363 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32); 364 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60); 365 366 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c); 367 /* The swift board expects a pca9539 but a pca9552 is compatible */ 368 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74); 369 370 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c); 371 /* The swift board expects a pca9539 but a pca9552 is compatible */ 372 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552", 373 0x74); 374 375 /* The swift board expects a TMP275 but a TMP105 is compatible */ 376 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48); 377 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a); 378 } 379 380 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) 381 { 382 AspeedSoCState *soc = &bmc->soc; 383 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 384 385 /* Bus 3: TODO bmp280@77 */ 386 /* Bus 3: TODO max31785@52 */ 387 /* Bus 3: TODO dps310@76 */ 388 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, 389 0x60); 390 391 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); 392 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); 393 394 /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ 395 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, 396 0x4a); 397 398 /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is 399 * good enough */ 400 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); 401 402 smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, 403 eeprom_buf); 404 i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 405 0x60); 406 /* Bus 11: TODO ucd90160@64 */ 407 } 408 409 static bool aspeed_get_mmio_exec(Object *obj, Error **errp) 410 { 411 return ASPEED_MACHINE(obj)->mmio_exec; 412 } 413 414 static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) 415 { 416 ASPEED_MACHINE(obj)->mmio_exec = value; 417 } 418 419 static void aspeed_machine_instance_init(Object *obj) 420 { 421 ASPEED_MACHINE(obj)->mmio_exec = false; 422 } 423 424 static void aspeed_machine_class_props_init(ObjectClass *oc) 425 { 426 object_class_property_add_bool(oc, "execute-in-place", 427 aspeed_get_mmio_exec, 428 aspeed_set_mmio_exec, &error_abort); 429 object_class_property_set_description(oc, "execute-in-place", 430 "boot directly from CE0 flash device", &error_abort); 431 } 432 433 static void aspeed_machine_class_init(ObjectClass *oc, void *data) 434 { 435 MachineClass *mc = MACHINE_CLASS(oc); 436 437 mc->init = aspeed_machine_init; 438 mc->max_cpus = ASPEED_CPUS_NUM; 439 mc->no_floppy = 1; 440 mc->no_cdrom = 1; 441 mc->no_parallel = 1; 442 443 aspeed_machine_class_props_init(oc); 444 } 445 446 static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) 447 { 448 MachineClass *mc = MACHINE_CLASS(oc); 449 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 450 451 mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)"; 452 amc->soc_name = "ast2400-a1"; 453 amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1; 454 amc->fmc_model = "n25q256a"; 455 amc->spi_model = "mx25l25635e"; 456 amc->num_cs = 1; 457 amc->i2c_init = palmetto_bmc_i2c_init; 458 mc->default_ram_size = 256 * MiB; 459 }; 460 461 static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) 462 { 463 MachineClass *mc = MACHINE_CLASS(oc); 464 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 465 466 mc->desc = "Aspeed AST2500 EVB (ARM1176)"; 467 amc->soc_name = "ast2500-a1"; 468 amc->hw_strap1 = AST2500_EVB_HW_STRAP1; 469 amc->fmc_model = "w25q256"; 470 amc->spi_model = "mx25l25635e"; 471 amc->num_cs = 1; 472 amc->i2c_init = ast2500_evb_i2c_init; 473 mc->default_ram_size = 512 * MiB; 474 }; 475 476 static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) 477 { 478 MachineClass *mc = MACHINE_CLASS(oc); 479 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 480 481 mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; 482 amc->soc_name = "ast2500-a1"; 483 amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; 484 amc->fmc_model = "n25q256a"; 485 amc->spi_model = "mx66l1g45g"; 486 amc->num_cs = 2; 487 amc->i2c_init = romulus_bmc_i2c_init; 488 mc->default_ram_size = 512 * MiB; 489 }; 490 491 static void aspeed_machine_swift_class_init(ObjectClass *oc, void *data) 492 { 493 MachineClass *mc = MACHINE_CLASS(oc); 494 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 495 496 mc->desc = "OpenPOWER Swift BMC (ARM1176)"; 497 amc->soc_name = "ast2500-a1"; 498 amc->hw_strap1 = SWIFT_BMC_HW_STRAP1; 499 amc->fmc_model = "mx66l1g45g"; 500 amc->spi_model = "mx66l1g45g"; 501 amc->num_cs = 2; 502 amc->i2c_init = swift_bmc_i2c_init; 503 mc->default_ram_size = 512 * MiB; 504 }; 505 506 static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data) 507 { 508 MachineClass *mc = MACHINE_CLASS(oc); 509 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 510 511 mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; 512 amc->soc_name = "ast2500-a1"; 513 amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1; 514 amc->fmc_model = "mx25l25635e"; 515 amc->spi_model = "mx66l1g45g"; 516 amc->num_cs = 2; 517 amc->i2c_init = witherspoon_bmc_i2c_init; 518 mc->default_ram_size = 512 * MiB; 519 }; 520 521 static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) 522 { 523 MachineClass *mc = MACHINE_CLASS(oc); 524 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 525 526 mc->desc = "Aspeed AST2600 EVB (Cortex A7)"; 527 amc->soc_name = "ast2600-a0"; 528 amc->hw_strap1 = AST2600_EVB_HW_STRAP1; 529 amc->hw_strap2 = AST2600_EVB_HW_STRAP2; 530 amc->fmc_model = "w25q512jv"; 531 amc->spi_model = "mx66u51235f"; 532 amc->num_cs = 1; 533 amc->i2c_init = ast2600_evb_i2c_init; 534 mc->default_ram_size = 1 * GiB; 535 }; 536 537 static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) 538 { 539 MachineClass *mc = MACHINE_CLASS(oc); 540 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 541 542 mc->desc = "Aspeed AST2600 EVB (Cortex A7)"; 543 amc->soc_name = "ast2600-a0"; 544 amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; 545 amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; 546 amc->fmc_model = "mx66l1g45g"; 547 amc->spi_model = "mx66l1g45g"; 548 amc->num_cs = 2; 549 amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */ 550 mc->default_ram_size = 1 * GiB; 551 }; 552 553 static const TypeInfo aspeed_machine_types[] = { 554 { 555 .name = MACHINE_TYPE_NAME("palmetto-bmc"), 556 .parent = TYPE_ASPEED_MACHINE, 557 .class_init = aspeed_machine_palmetto_class_init, 558 }, { 559 .name = MACHINE_TYPE_NAME("ast2500-evb"), 560 .parent = TYPE_ASPEED_MACHINE, 561 .class_init = aspeed_machine_ast2500_evb_class_init, 562 }, { 563 .name = MACHINE_TYPE_NAME("romulus-bmc"), 564 .parent = TYPE_ASPEED_MACHINE, 565 .class_init = aspeed_machine_romulus_class_init, 566 }, { 567 .name = MACHINE_TYPE_NAME("swift-bmc"), 568 .parent = TYPE_ASPEED_MACHINE, 569 .class_init = aspeed_machine_swift_class_init, 570 }, { 571 .name = MACHINE_TYPE_NAME("witherspoon-bmc"), 572 .parent = TYPE_ASPEED_MACHINE, 573 .class_init = aspeed_machine_witherspoon_class_init, 574 }, { 575 .name = MACHINE_TYPE_NAME("ast2600-evb"), 576 .parent = TYPE_ASPEED_MACHINE, 577 .class_init = aspeed_machine_ast2600_evb_class_init, 578 }, { 579 .name = MACHINE_TYPE_NAME("tacoma-bmc"), 580 .parent = TYPE_ASPEED_MACHINE, 581 .class_init = aspeed_machine_tacoma_class_init, 582 }, { 583 .name = TYPE_ASPEED_MACHINE, 584 .parent = TYPE_MACHINE, 585 .instance_size = sizeof(AspeedMachine), 586 .instance_init = aspeed_machine_instance_init, 587 .class_size = sizeof(AspeedMachineClass), 588 .class_init = aspeed_machine_class_init, 589 .abstract = true, 590 } 591 }; 592 593 DEFINE_TYPES(aspeed_machine_types) 594