1 /* 2 * OpenPOWER Palmetto BMC 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12 #include "qemu/osdep.h" 13 #include "qapi/error.h" 14 #include "hw/arm/boot.h" 15 #include "hw/arm/aspeed.h" 16 #include "hw/arm/aspeed_soc.h" 17 #include "hw/i2c/i2c_mux_pca954x.h" 18 #include "hw/i2c/smbus_eeprom.h" 19 #include "hw/misc/pca9552.h" 20 #include "hw/sensor/tmp105.h" 21 #include "hw/misc/led.h" 22 #include "hw/qdev-properties.h" 23 #include "sysemu/block-backend.h" 24 #include "hw/loader.h" 25 #include "qemu/error-report.h" 26 #include "qemu/units.h" 27 28 static struct arm_boot_info aspeed_board_binfo = { 29 .board_id = -1, /* device-tree-only board */ 30 }; 31 32 struct AspeedMachineState { 33 /* Private */ 34 MachineState parent_obj; 35 /* Public */ 36 37 AspeedSoCState soc; 38 MemoryRegion ram_container; 39 MemoryRegion max_ram; 40 bool mmio_exec; 41 char *fmc_model; 42 char *spi_model; 43 }; 44 45 /* Palmetto hardware value: 0x120CE416 */ 46 #define PALMETTO_BMC_HW_STRAP1 ( \ 47 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \ 48 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \ 49 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 50 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ 51 SCU_HW_STRAP_VGA_CLASS_CODE | \ 52 SCU_HW_STRAP_LPC_RESET_PIN | \ 53 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ 54 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 55 SCU_HW_STRAP_SPI_WIDTH | \ 56 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 57 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 58 59 /* TODO: Find the actual hardware value */ 60 #define SUPERMICROX11_BMC_HW_STRAP1 ( \ 61 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ 62 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2) | \ 63 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 64 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ 65 SCU_HW_STRAP_VGA_CLASS_CODE | \ 66 SCU_HW_STRAP_LPC_RESET_PIN | \ 67 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ 68 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 69 SCU_HW_STRAP_SPI_WIDTH | \ 70 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 71 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 72 73 /* AST2500 evb hardware value: 0xF100C2E6 */ 74 #define AST2500_EVB_HW_STRAP1 (( \ 75 AST2500_HW_STRAP1_DEFAULTS | \ 76 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 77 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 78 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 79 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 80 SCU_HW_STRAP_MAC1_RGMII | \ 81 SCU_HW_STRAP_MAC0_RGMII) & \ 82 ~SCU_HW_STRAP_2ND_BOOT_WDT) 83 84 /* Romulus hardware value: 0xF10AD206 */ 85 #define ROMULUS_BMC_HW_STRAP1 ( \ 86 AST2500_HW_STRAP1_DEFAULTS | \ 87 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 88 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 89 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 90 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 91 SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ 92 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) 93 94 /* Sonorapass hardware value: 0xF100D216 */ 95 #define SONORAPASS_BMC_HW_STRAP1 ( \ 96 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 97 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 98 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 99 SCU_AST2500_HW_STRAP_RESERVED28 | \ 100 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 101 SCU_HW_STRAP_VGA_CLASS_CODE | \ 102 SCU_HW_STRAP_LPC_RESET_PIN | \ 103 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ 104 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 105 SCU_HW_STRAP_VGA_BIOS_ROM | \ 106 SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ 107 SCU_AST2500_HW_STRAP_RESERVED1) 108 109 /* Swift hardware value: 0xF11AD206 */ 110 #define SWIFT_BMC_HW_STRAP1 ( \ 111 AST2500_HW_STRAP1_DEFAULTS | \ 112 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 113 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 114 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 115 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 116 SCU_H_PLL_BYPASS_EN | \ 117 SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ 118 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) 119 120 #define G220A_BMC_HW_STRAP1 ( \ 121 SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ 122 SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ 123 SCU_AST2500_HW_STRAP_UART_DEBUG | \ 124 SCU_AST2500_HW_STRAP_RESERVED28 | \ 125 SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ 126 SCU_HW_STRAP_2ND_BOOT_WDT | \ 127 SCU_HW_STRAP_VGA_CLASS_CODE | \ 128 SCU_HW_STRAP_LPC_RESET_PIN | \ 129 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ 130 SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ 131 SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \ 132 SCU_AST2500_HW_STRAP_RESERVED1) 133 134 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ 135 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 136 137 /* Quanta-Q71l hardware value */ 138 #define QUANTA_Q71L_BMC_HW_STRAP1 ( \ 139 SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ 140 SCU_AST2400_HW_STRAP_DRAM_CONFIG(2/* DDR3 with CL=6, CWL=5 */) | \ 141 SCU_AST2400_HW_STRAP_ACPI_DIS | \ 142 SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_24M_IN) | \ 143 SCU_HW_STRAP_VGA_CLASS_CODE | \ 144 SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_PASS_THROUGH) | \ 145 SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ 146 SCU_HW_STRAP_SPI_WIDTH | \ 147 SCU_HW_STRAP_VGA_SIZE_SET(VGA_8M_DRAM) | \ 148 SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) 149 150 /* AST2600 evb hardware value */ 151 #define AST2600_EVB_HW_STRAP1 0x000000C0 152 #define AST2600_EVB_HW_STRAP2 0x00000003 153 154 /* Tacoma hardware value */ 155 #define TACOMA_BMC_HW_STRAP1 0x00000000 156 #define TACOMA_BMC_HW_STRAP2 0x00000040 157 158 /* Rainier hardware value: (QEMU prototype) */ 159 #define RAINIER_BMC_HW_STRAP1 0x00000000 160 #define RAINIER_BMC_HW_STRAP2 0x00000000 161 162 /* 163 * The max ram region is for firmwares that scan the address space 164 * with load/store to guess how much RAM the SoC has. 165 */ 166 static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size) 167 { 168 return 0; 169 } 170 171 static void max_ram_write(void *opaque, hwaddr offset, uint64_t value, 172 unsigned size) 173 { 174 /* Discard writes */ 175 } 176 177 static const MemoryRegionOps max_ram_ops = { 178 .read = max_ram_read, 179 .write = max_ram_write, 180 .endianness = DEVICE_NATIVE_ENDIAN, 181 }; 182 183 #define AST_SMP_MAILBOX_BASE 0x1e6e2180 184 #define AST_SMP_MBOX_FIELD_ENTRY (AST_SMP_MAILBOX_BASE + 0x0) 185 #define AST_SMP_MBOX_FIELD_GOSIGN (AST_SMP_MAILBOX_BASE + 0x4) 186 #define AST_SMP_MBOX_FIELD_READY (AST_SMP_MAILBOX_BASE + 0x8) 187 #define AST_SMP_MBOX_FIELD_POLLINSN (AST_SMP_MAILBOX_BASE + 0xc) 188 #define AST_SMP_MBOX_CODE (AST_SMP_MAILBOX_BASE + 0x10) 189 #define AST_SMP_MBOX_GOSIGN 0xabbaab00 190 191 static void aspeed_write_smpboot(ARMCPU *cpu, 192 const struct arm_boot_info *info) 193 { 194 static const uint32_t poll_mailbox_ready[] = { 195 /* 196 * r2 = per-cpu go sign value 197 * r1 = AST_SMP_MBOX_FIELD_ENTRY 198 * r0 = AST_SMP_MBOX_FIELD_GOSIGN 199 */ 200 0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 */ 201 0xe21000ff, /* ands r0, r0, #255 */ 202 0xe59f201c, /* ldr r2, [pc, #28] */ 203 0xe1822000, /* orr r2, r2, r0 */ 204 205 0xe59f1018, /* ldr r1, [pc, #24] */ 206 0xe59f0018, /* ldr r0, [pc, #24] */ 207 208 0xe320f002, /* wfe */ 209 0xe5904000, /* ldr r4, [r0] */ 210 0xe1520004, /* cmp r2, r4 */ 211 0x1afffffb, /* bne <wfe> */ 212 0xe591f000, /* ldr pc, [r1] */ 213 AST_SMP_MBOX_GOSIGN, 214 AST_SMP_MBOX_FIELD_ENTRY, 215 AST_SMP_MBOX_FIELD_GOSIGN, 216 }; 217 218 rom_add_blob_fixed("aspeed.smpboot", poll_mailbox_ready, 219 sizeof(poll_mailbox_ready), 220 info->smp_loader_start); 221 } 222 223 static void aspeed_reset_secondary(ARMCPU *cpu, 224 const struct arm_boot_info *info) 225 { 226 AddressSpace *as = arm_boot_address_space(cpu, info); 227 CPUState *cs = CPU(cpu); 228 229 /* info->smp_bootreg_addr */ 230 address_space_stl_notdirty(as, AST_SMP_MBOX_FIELD_GOSIGN, 0, 231 MEMTXATTRS_UNSPECIFIED, NULL); 232 cpu_set_pc(cs, info->smp_loader_start); 233 } 234 235 #define FIRMWARE_ADDR 0x0 236 237 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, 238 Error **errp) 239 { 240 BlockBackend *blk = blk_by_legacy_dinfo(dinfo); 241 uint8_t *storage; 242 int64_t size; 243 244 /* The block backend size should have already been 'validated' by 245 * the creation of the m25p80 object. 246 */ 247 size = blk_getlength(blk); 248 if (size <= 0) { 249 error_setg(errp, "failed to get flash size"); 250 return; 251 } 252 253 if (rom_size > size) { 254 rom_size = size; 255 } 256 257 storage = g_new0(uint8_t, rom_size); 258 if (blk_pread(blk, 0, storage, rom_size) < 0) { 259 error_setg(errp, "failed to read the initial flash content"); 260 return; 261 } 262 263 rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); 264 g_free(storage); 265 } 266 267 static void aspeed_board_init_flashes(AspeedSMCState *s, 268 const char *flashtype) 269 { 270 int i ; 271 272 for (i = 0; i < s->num_cs; ++i) { 273 AspeedSMCFlash *fl = &s->flashes[i]; 274 DriveInfo *dinfo = drive_get_next(IF_MTD); 275 qemu_irq cs_line; 276 277 fl->flash = qdev_new(flashtype); 278 if (dinfo) { 279 qdev_prop_set_drive(fl->flash, "drive", 280 blk_by_legacy_dinfo(dinfo)); 281 } 282 qdev_realize_and_unref(fl->flash, BUS(s->spi), &error_fatal); 283 284 cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0); 285 sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line); 286 } 287 } 288 289 static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) 290 { 291 DeviceState *card; 292 293 if (!dinfo) { 294 return; 295 } 296 card = qdev_new(TYPE_SD_CARD); 297 qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), 298 &error_fatal); 299 qdev_realize_and_unref(card, 300 qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), 301 &error_fatal); 302 } 303 304 static void aspeed_machine_init(MachineState *machine) 305 { 306 AspeedMachineState *bmc = ASPEED_MACHINE(machine); 307 AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); 308 AspeedSoCClass *sc; 309 DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); 310 ram_addr_t max_ram_size; 311 int i; 312 NICInfo *nd = &nd_table[0]; 313 314 memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container", 315 4 * GiB); 316 memory_region_add_subregion(&bmc->ram_container, 0, machine->ram); 317 318 object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name); 319 320 sc = ASPEED_SOC_GET_CLASS(&bmc->soc); 321 322 /* 323 * This will error out if isize is not supported by memory controller. 324 */ 325 object_property_set_uint(OBJECT(&bmc->soc), "ram-size", machine->ram_size, 326 &error_fatal); 327 328 for (i = 0; i < sc->macs_num; i++) { 329 if ((amc->macs_mask & (1 << i)) && nd->used) { 330 qemu_check_nic_model(nd, TYPE_FTGMAC100); 331 qdev_set_nic_properties(DEVICE(&bmc->soc.ftgmac100[i]), nd); 332 nd++; 333 } 334 } 335 336 object_property_set_int(OBJECT(&bmc->soc), "hw-strap1", amc->hw_strap1, 337 &error_abort); 338 object_property_set_int(OBJECT(&bmc->soc), "hw-strap2", amc->hw_strap2, 339 &error_abort); 340 object_property_set_int(OBJECT(&bmc->soc), "num-cs", amc->num_cs, 341 &error_abort); 342 object_property_set_link(OBJECT(&bmc->soc), "dram", 343 OBJECT(machine->ram), &error_abort); 344 if (machine->kernel_filename) { 345 /* 346 * When booting with a -kernel command line there is no u-boot 347 * that runs to unlock the SCU. In this case set the default to 348 * be unlocked as the kernel expects 349 */ 350 object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key", 351 ASPEED_SCU_PROT_KEY, &error_abort); 352 } 353 qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort); 354 355 memory_region_add_subregion(get_system_memory(), 356 sc->memmap[ASPEED_DEV_SDRAM], 357 &bmc->ram_container); 358 359 max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", 360 &error_abort); 361 memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, 362 "max_ram", max_ram_size - machine->ram_size); 363 memory_region_add_subregion(&bmc->ram_container, machine->ram_size, &bmc->max_ram); 364 365 aspeed_board_init_flashes(&bmc->soc.fmc, bmc->fmc_model ? 366 bmc->fmc_model : amc->fmc_model); 367 aspeed_board_init_flashes(&bmc->soc.spi[0], bmc->spi_model ? 368 bmc->spi_model : amc->spi_model); 369 370 /* Install first FMC flash content as a boot rom. */ 371 if (drive0) { 372 AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0]; 373 MemoryRegion *boot_rom = g_new(MemoryRegion, 1); 374 375 /* 376 * create a ROM region using the default mapping window size of 377 * the flash module. The window size is 64MB for the AST2400 378 * SoC and 128MB for the AST2500 SoC, which is twice as big as 379 * needed by the flash modules of the Aspeed machines. 380 */ 381 if (ASPEED_MACHINE(machine)->mmio_exec) { 382 memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom", 383 &fl->mmio, 0, fl->size); 384 memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, 385 boot_rom); 386 } else { 387 memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", 388 fl->size, &error_abort); 389 memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, 390 boot_rom); 391 write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); 392 } 393 } 394 395 if (machine->kernel_filename && sc->num_cpus > 1) { 396 /* With no u-boot we must set up a boot stub for the secondary CPU */ 397 MemoryRegion *smpboot = g_new(MemoryRegion, 1); 398 memory_region_init_ram(smpboot, NULL, "aspeed.smpboot", 399 0x80, &error_abort); 400 memory_region_add_subregion(get_system_memory(), 401 AST_SMP_MAILBOX_BASE, smpboot); 402 403 aspeed_board_binfo.write_secondary_boot = aspeed_write_smpboot; 404 aspeed_board_binfo.secondary_cpu_reset_hook = aspeed_reset_secondary; 405 aspeed_board_binfo.smp_loader_start = AST_SMP_MBOX_CODE; 406 } 407 408 aspeed_board_binfo.ram_size = machine->ram_size; 409 aspeed_board_binfo.loader_start = sc->memmap[ASPEED_DEV_SDRAM]; 410 aspeed_board_binfo.nb_cpus = sc->num_cpus; 411 412 if (amc->i2c_init) { 413 amc->i2c_init(bmc); 414 } 415 416 for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { 417 sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD)); 418 } 419 420 if (bmc->soc.emmc.num_slots) { 421 sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD)); 422 } 423 424 arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); 425 } 426 427 static void palmetto_bmc_i2c_init(AspeedMachineState *bmc) 428 { 429 AspeedSoCState *soc = &bmc->soc; 430 DeviceState *dev; 431 uint8_t *eeprom_buf = g_malloc0(32 * 1024); 432 433 /* The palmetto platform expects a ds3231 RTC but a ds1338 is 434 * enough to provide basic RTC features. Alarms will be missing */ 435 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68); 436 437 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, 438 eeprom_buf); 439 440 /* add a TMP423 temperature sensor */ 441 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), 442 "tmp423", 0x4c)); 443 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 444 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 445 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 446 object_property_set_int(OBJECT(dev), "temperature3", 110000, &error_abort); 447 } 448 449 static void quanta_q71l_bmc_i2c_init(AspeedMachineState *bmc) 450 { 451 AspeedSoCState *soc = &bmc->soc; 452 453 /* 454 * The quanta-q71l platform expects tmp75s which are compatible with 455 * tmp105s. 456 */ 457 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4c); 458 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4e); 459 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4f); 460 461 /* TODO: i2c-1: Add baseboard FRU eeprom@54 24c64 */ 462 /* TODO: i2c-1: Add Frontpanel FRU eeprom@57 24c64 */ 463 /* TODO: Add Memory Riser i2c mux and eeproms. */ 464 465 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x74); 466 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9548", 0x77); 467 468 /* TODO: i2c-3: Add BIOS FRU eeprom@56 24c64 */ 469 470 /* i2c-7 */ 471 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70); 472 /* - i2c@0: pmbus@59 */ 473 /* - i2c@1: pmbus@58 */ 474 /* - i2c@2: pmbus@58 */ 475 /* - i2c@3: pmbus@59 */ 476 477 /* TODO: i2c-7: Add PDB FRU eeprom@52 */ 478 /* TODO: i2c-8: Add BMC FRU eeprom@50 */ 479 } 480 481 static void ast2500_evb_i2c_init(AspeedMachineState *bmc) 482 { 483 AspeedSoCState *soc = &bmc->soc; 484 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 485 486 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50, 487 eeprom_buf); 488 489 /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ 490 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), 491 TYPE_TMP105, 0x4d); 492 493 /* The AST2500 EVB does not have an RTC. Let's pretend that one is 494 * plugged on the I2C bus header */ 495 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); 496 } 497 498 static void ast2600_evb_i2c_init(AspeedMachineState *bmc) 499 { 500 /* Start with some devices on our I2C busses */ 501 ast2500_evb_i2c_init(bmc); 502 } 503 504 static void romulus_bmc_i2c_init(AspeedMachineState *bmc) 505 { 506 AspeedSoCState *soc = &bmc->soc; 507 508 /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is 509 * good enough */ 510 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); 511 } 512 513 static void swift_bmc_i2c_init(AspeedMachineState *bmc) 514 { 515 AspeedSoCState *soc = &bmc->soc; 516 517 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60); 518 519 /* The swift board expects a TMP275 but a TMP105 is compatible */ 520 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48); 521 /* The swift board expects a pca9551 but a pca9552 is compatible */ 522 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60); 523 524 /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ 525 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32); 526 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); 527 528 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); 529 /* The swift board expects a pca9539 but a pca9552 is compatible */ 530 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74); 531 532 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); 533 /* The swift board expects a pca9539 but a pca9552 is compatible */ 534 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552", 535 0x74); 536 537 /* The swift board expects a TMP275 but a TMP105 is compatible */ 538 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48); 539 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a); 540 } 541 542 static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) 543 { 544 AspeedSoCState *soc = &bmc->soc; 545 546 /* bus 2 : */ 547 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48); 548 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49); 549 /* bus 2 : pca9546 @ 0x73 */ 550 551 /* bus 3 : pca9548 @ 0x70 */ 552 553 /* bus 4 : */ 554 uint8_t *eeprom4_54 = g_malloc0(8 * 1024); 555 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, 556 eeprom4_54); 557 /* PCA9539 @ 0x76, but PCA9552 is compatible */ 558 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76); 559 /* PCA9539 @ 0x77, but PCA9552 is compatible */ 560 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77); 561 562 /* bus 6 : */ 563 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48); 564 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49); 565 /* bus 6 : pca9546 @ 0x73 */ 566 567 /* bus 8 : */ 568 uint8_t *eeprom8_56 = g_malloc0(8 * 1024); 569 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56, 570 eeprom8_56); 571 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); 572 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61); 573 /* bus 8 : adc128d818 @ 0x1d */ 574 /* bus 8 : adc128d818 @ 0x1f */ 575 576 /* 577 * bus 13 : pca9548 @ 0x71 578 * - channel 3: 579 * - tmm421 @ 0x4c 580 * - tmp421 @ 0x4e 581 * - tmp421 @ 0x4f 582 */ 583 584 } 585 586 static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) 587 { 588 static const struct { 589 unsigned gpio_id; 590 LEDColor color; 591 const char *description; 592 bool gpio_polarity; 593 } pca1_leds[] = { 594 {13, LED_COLOR_GREEN, "front-fault-4", GPIO_POLARITY_ACTIVE_LOW}, 595 {14, LED_COLOR_GREEN, "front-power-3", GPIO_POLARITY_ACTIVE_LOW}, 596 {15, LED_COLOR_GREEN, "front-id-5", GPIO_POLARITY_ACTIVE_LOW}, 597 }; 598 AspeedSoCState *soc = &bmc->soc; 599 uint8_t *eeprom_buf = g_malloc0(8 * 1024); 600 DeviceState *dev; 601 LEDState *led; 602 603 /* Bus 3: TODO bmp280@77 */ 604 /* Bus 3: TODO max31785@52 */ 605 /* Bus 3: TODO dps310@76 */ 606 dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); 607 qdev_prop_set_string(dev, "description", "pca1"); 608 i2c_slave_realize_and_unref(I2C_SLAVE(dev), 609 aspeed_i2c_get_bus(&soc->i2c, 3), 610 &error_fatal); 611 612 for (size_t i = 0; i < ARRAY_SIZE(pca1_leds); i++) { 613 led = led_create_simple(OBJECT(bmc), 614 pca1_leds[i].gpio_polarity, 615 pca1_leds[i].color, 616 pca1_leds[i].description); 617 qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id, 618 qdev_get_gpio_in(DEVICE(led), 0)); 619 } 620 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c); 621 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c); 622 623 /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ 624 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105, 625 0x4a); 626 627 /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is 628 * good enough */ 629 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); 630 631 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51, 632 eeprom_buf); 633 dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); 634 qdev_prop_set_string(dev, "description", "pca0"); 635 i2c_slave_realize_and_unref(I2C_SLAVE(dev), 636 aspeed_i2c_get_bus(&soc->i2c, 11), 637 &error_fatal); 638 /* Bus 11: TODO ucd90160@64 */ 639 } 640 641 static void g220a_bmc_i2c_init(AspeedMachineState *bmc) 642 { 643 AspeedSoCState *soc = &bmc->soc; 644 DeviceState *dev; 645 646 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), 647 "emc1413", 0x4c)); 648 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 649 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 650 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 651 652 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), 653 "emc1413", 0x4c)); 654 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 655 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 656 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 657 658 dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), 659 "emc1413", 0x4c)); 660 object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); 661 object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); 662 object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); 663 664 static uint8_t eeprom_buf[2 * 1024] = { 665 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe, 666 0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65, 667 0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32, 668 0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42, 669 0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45, 670 0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1, 671 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, 672 }; 673 smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57, 674 eeprom_buf); 675 } 676 677 static void rainier_bmc_i2c_init(AspeedMachineState *bmc) 678 { 679 AspeedSoCState *soc = &bmc->soc; 680 681 /* The rainier expects a TMP275 but a TMP105 is compatible */ 682 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 683 0x48); 684 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 685 0x49); 686 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 687 0x4a); 688 689 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 690 0x48); 691 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 692 0x49); 693 694 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 695 0x48); 696 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 697 0x4a); 698 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 699 0x4b); 700 701 /* Bus 7: TODO dps310@76 */ 702 /* Bus 7: TODO max31785@52 */ 703 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61); 704 /* Bus 7: TODO si7021-a20@20 */ 705 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105, 706 0x48); 707 708 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 709 0x48); 710 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 711 0x4a); 712 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61); 713 /* Bus 8: ucd90320@11 */ 714 /* Bus 8: ucd90320@b */ 715 /* Bus 8: ucd90320@c */ 716 717 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); 718 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4d); 719 720 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); 721 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4d); 722 723 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 724 0x48); 725 i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 726 0x49); 727 } 728 729 static bool aspeed_get_mmio_exec(Object *obj, Error **errp) 730 { 731 return ASPEED_MACHINE(obj)->mmio_exec; 732 } 733 734 static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) 735 { 736 ASPEED_MACHINE(obj)->mmio_exec = value; 737 } 738 739 static void aspeed_machine_instance_init(Object *obj) 740 { 741 ASPEED_MACHINE(obj)->mmio_exec = false; 742 } 743 744 static char *aspeed_get_fmc_model(Object *obj, Error **errp) 745 { 746 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 747 return g_strdup(bmc->fmc_model); 748 } 749 750 static void aspeed_set_fmc_model(Object *obj, const char *value, Error **errp) 751 { 752 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 753 754 g_free(bmc->fmc_model); 755 bmc->fmc_model = g_strdup(value); 756 } 757 758 static char *aspeed_get_spi_model(Object *obj, Error **errp) 759 { 760 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 761 return g_strdup(bmc->spi_model); 762 } 763 764 static void aspeed_set_spi_model(Object *obj, const char *value, Error **errp) 765 { 766 AspeedMachineState *bmc = ASPEED_MACHINE(obj); 767 768 g_free(bmc->spi_model); 769 bmc->spi_model = g_strdup(value); 770 } 771 772 static void aspeed_machine_class_props_init(ObjectClass *oc) 773 { 774 object_class_property_add_bool(oc, "execute-in-place", 775 aspeed_get_mmio_exec, 776 aspeed_set_mmio_exec); 777 object_class_property_set_description(oc, "execute-in-place", 778 "boot directly from CE0 flash device"); 779 780 object_class_property_add_str(oc, "fmc-model", aspeed_get_fmc_model, 781 aspeed_set_fmc_model); 782 object_class_property_set_description(oc, "fmc-model", 783 "Change the FMC Flash model"); 784 object_class_property_add_str(oc, "spi-model", aspeed_get_spi_model, 785 aspeed_set_spi_model); 786 object_class_property_set_description(oc, "spi-model", 787 "Change the SPI Flash model"); 788 } 789 790 static int aspeed_soc_num_cpus(const char *soc_name) 791 { 792 AspeedSoCClass *sc = ASPEED_SOC_CLASS(object_class_by_name(soc_name)); 793 return sc->num_cpus; 794 } 795 796 static void aspeed_machine_class_init(ObjectClass *oc, void *data) 797 { 798 MachineClass *mc = MACHINE_CLASS(oc); 799 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 800 801 mc->init = aspeed_machine_init; 802 mc->no_floppy = 1; 803 mc->no_cdrom = 1; 804 mc->no_parallel = 1; 805 mc->default_ram_id = "ram"; 806 amc->macs_mask = ASPEED_MAC0_ON; 807 808 aspeed_machine_class_props_init(oc); 809 } 810 811 static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) 812 { 813 MachineClass *mc = MACHINE_CLASS(oc); 814 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 815 816 mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)"; 817 amc->soc_name = "ast2400-a1"; 818 amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1; 819 amc->fmc_model = "n25q256a"; 820 amc->spi_model = "mx25l25635e"; 821 amc->num_cs = 1; 822 amc->i2c_init = palmetto_bmc_i2c_init; 823 mc->default_ram_size = 256 * MiB; 824 mc->default_cpus = mc->min_cpus = mc->max_cpus = 825 aspeed_soc_num_cpus(amc->soc_name); 826 }; 827 828 static void aspeed_machine_quanta_q71l_class_init(ObjectClass *oc, void *data) 829 { 830 MachineClass *mc = MACHINE_CLASS(oc); 831 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 832 833 mc->desc = "Quanta-Q71l BMC (ARM926EJ-S)"; 834 amc->soc_name = "ast2400-a1"; 835 amc->hw_strap1 = QUANTA_Q71L_BMC_HW_STRAP1; 836 amc->fmc_model = "n25q256a"; 837 amc->spi_model = "mx25l25635e"; 838 amc->num_cs = 1; 839 amc->i2c_init = quanta_q71l_bmc_i2c_init; 840 mc->default_ram_size = 128 * MiB; 841 mc->default_cpus = mc->min_cpus = mc->max_cpus = 842 aspeed_soc_num_cpus(amc->soc_name); 843 } 844 845 static void aspeed_machine_supermicrox11_bmc_class_init(ObjectClass *oc, 846 void *data) 847 { 848 MachineClass *mc = MACHINE_CLASS(oc); 849 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 850 851 mc->desc = "Supermicro X11 BMC (ARM926EJ-S)"; 852 amc->soc_name = "ast2400-a1"; 853 amc->hw_strap1 = SUPERMICROX11_BMC_HW_STRAP1; 854 amc->fmc_model = "mx25l25635e"; 855 amc->spi_model = "mx25l25635e"; 856 amc->num_cs = 1; 857 amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; 858 amc->i2c_init = palmetto_bmc_i2c_init; 859 mc->default_ram_size = 256 * MiB; 860 } 861 862 static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) 863 { 864 MachineClass *mc = MACHINE_CLASS(oc); 865 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 866 867 mc->desc = "Aspeed AST2500 EVB (ARM1176)"; 868 amc->soc_name = "ast2500-a1"; 869 amc->hw_strap1 = AST2500_EVB_HW_STRAP1; 870 amc->fmc_model = "w25q256"; 871 amc->spi_model = "mx25l25635e"; 872 amc->num_cs = 1; 873 amc->i2c_init = ast2500_evb_i2c_init; 874 mc->default_ram_size = 512 * MiB; 875 mc->default_cpus = mc->min_cpus = mc->max_cpus = 876 aspeed_soc_num_cpus(amc->soc_name); 877 }; 878 879 static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) 880 { 881 MachineClass *mc = MACHINE_CLASS(oc); 882 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 883 884 mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; 885 amc->soc_name = "ast2500-a1"; 886 amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; 887 amc->fmc_model = "n25q256a"; 888 amc->spi_model = "mx66l1g45g"; 889 amc->num_cs = 2; 890 amc->i2c_init = romulus_bmc_i2c_init; 891 mc->default_ram_size = 512 * MiB; 892 mc->default_cpus = mc->min_cpus = mc->max_cpus = 893 aspeed_soc_num_cpus(amc->soc_name); 894 }; 895 896 static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data) 897 { 898 MachineClass *mc = MACHINE_CLASS(oc); 899 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 900 901 mc->desc = "OCP SonoraPass BMC (ARM1176)"; 902 amc->soc_name = "ast2500-a1"; 903 amc->hw_strap1 = SONORAPASS_BMC_HW_STRAP1; 904 amc->fmc_model = "mx66l1g45g"; 905 amc->spi_model = "mx66l1g45g"; 906 amc->num_cs = 2; 907 amc->i2c_init = sonorapass_bmc_i2c_init; 908 mc->default_ram_size = 512 * MiB; 909 mc->default_cpus = mc->min_cpus = mc->max_cpus = 910 aspeed_soc_num_cpus(amc->soc_name); 911 }; 912 913 static void aspeed_machine_swift_class_init(ObjectClass *oc, void *data) 914 { 915 MachineClass *mc = MACHINE_CLASS(oc); 916 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 917 918 mc->desc = "OpenPOWER Swift BMC (ARM1176)"; 919 amc->soc_name = "ast2500-a1"; 920 amc->hw_strap1 = SWIFT_BMC_HW_STRAP1; 921 amc->fmc_model = "mx66l1g45g"; 922 amc->spi_model = "mx66l1g45g"; 923 amc->num_cs = 2; 924 amc->i2c_init = swift_bmc_i2c_init; 925 mc->default_ram_size = 512 * MiB; 926 mc->default_cpus = mc->min_cpus = mc->max_cpus = 927 aspeed_soc_num_cpus(amc->soc_name); 928 929 mc->deprecation_reason = "redundant system. Please use a similar " 930 "OpenPOWER BMC, Witherspoon or Romulus."; 931 }; 932 933 static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data) 934 { 935 MachineClass *mc = MACHINE_CLASS(oc); 936 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 937 938 mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; 939 amc->soc_name = "ast2500-a1"; 940 amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1; 941 amc->fmc_model = "mx25l25635e"; 942 amc->spi_model = "mx66l1g45g"; 943 amc->num_cs = 2; 944 amc->i2c_init = witherspoon_bmc_i2c_init; 945 mc->default_ram_size = 512 * MiB; 946 mc->default_cpus = mc->min_cpus = mc->max_cpus = 947 aspeed_soc_num_cpus(amc->soc_name); 948 }; 949 950 static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) 951 { 952 MachineClass *mc = MACHINE_CLASS(oc); 953 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 954 955 mc->desc = "Aspeed AST2600 EVB (Cortex-A7)"; 956 amc->soc_name = "ast2600-a1"; 957 amc->hw_strap1 = AST2600_EVB_HW_STRAP1; 958 amc->hw_strap2 = AST2600_EVB_HW_STRAP2; 959 amc->fmc_model = "w25q512jv"; 960 amc->spi_model = "mx66u51235f"; 961 amc->num_cs = 1; 962 amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON | ASPEED_MAC3_ON; 963 amc->i2c_init = ast2600_evb_i2c_init; 964 mc->default_ram_size = 1 * GiB; 965 mc->default_cpus = mc->min_cpus = mc->max_cpus = 966 aspeed_soc_num_cpus(amc->soc_name); 967 }; 968 969 static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) 970 { 971 MachineClass *mc = MACHINE_CLASS(oc); 972 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 973 974 mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)"; 975 amc->soc_name = "ast2600-a1"; 976 amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; 977 amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; 978 amc->fmc_model = "mx66l1g45g"; 979 amc->spi_model = "mx66l1g45g"; 980 amc->num_cs = 2; 981 amc->macs_mask = ASPEED_MAC2_ON; 982 amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */ 983 mc->default_ram_size = 1 * GiB; 984 mc->default_cpus = mc->min_cpus = mc->max_cpus = 985 aspeed_soc_num_cpus(amc->soc_name); 986 }; 987 988 static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) 989 { 990 MachineClass *mc = MACHINE_CLASS(oc); 991 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 992 993 mc->desc = "Bytedance G220A BMC (ARM1176)"; 994 amc->soc_name = "ast2500-a1"; 995 amc->hw_strap1 = G220A_BMC_HW_STRAP1; 996 amc->fmc_model = "n25q512a"; 997 amc->spi_model = "mx25l25635e"; 998 amc->num_cs = 2; 999 amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON; 1000 amc->i2c_init = g220a_bmc_i2c_init; 1001 mc->default_ram_size = 1024 * MiB; 1002 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1003 aspeed_soc_num_cpus(amc->soc_name); 1004 }; 1005 1006 static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) 1007 { 1008 MachineClass *mc = MACHINE_CLASS(oc); 1009 AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); 1010 1011 mc->desc = "IBM Rainier BMC (Cortex-A7)"; 1012 amc->soc_name = "ast2600-a1"; 1013 amc->hw_strap1 = RAINIER_BMC_HW_STRAP1; 1014 amc->hw_strap2 = RAINIER_BMC_HW_STRAP2; 1015 amc->fmc_model = "mx66l1g45g"; 1016 amc->spi_model = "mx66l1g45g"; 1017 amc->num_cs = 2; 1018 amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; 1019 amc->i2c_init = rainier_bmc_i2c_init; 1020 mc->default_ram_size = 1 * GiB; 1021 mc->default_cpus = mc->min_cpus = mc->max_cpus = 1022 aspeed_soc_num_cpus(amc->soc_name); 1023 }; 1024 1025 static const TypeInfo aspeed_machine_types[] = { 1026 { 1027 .name = MACHINE_TYPE_NAME("palmetto-bmc"), 1028 .parent = TYPE_ASPEED_MACHINE, 1029 .class_init = aspeed_machine_palmetto_class_init, 1030 }, { 1031 .name = MACHINE_TYPE_NAME("supermicrox11-bmc"), 1032 .parent = TYPE_ASPEED_MACHINE, 1033 .class_init = aspeed_machine_supermicrox11_bmc_class_init, 1034 }, { 1035 .name = MACHINE_TYPE_NAME("ast2500-evb"), 1036 .parent = TYPE_ASPEED_MACHINE, 1037 .class_init = aspeed_machine_ast2500_evb_class_init, 1038 }, { 1039 .name = MACHINE_TYPE_NAME("romulus-bmc"), 1040 .parent = TYPE_ASPEED_MACHINE, 1041 .class_init = aspeed_machine_romulus_class_init, 1042 }, { 1043 .name = MACHINE_TYPE_NAME("swift-bmc"), 1044 .parent = TYPE_ASPEED_MACHINE, 1045 .class_init = aspeed_machine_swift_class_init, 1046 }, { 1047 .name = MACHINE_TYPE_NAME("sonorapass-bmc"), 1048 .parent = TYPE_ASPEED_MACHINE, 1049 .class_init = aspeed_machine_sonorapass_class_init, 1050 }, { 1051 .name = MACHINE_TYPE_NAME("witherspoon-bmc"), 1052 .parent = TYPE_ASPEED_MACHINE, 1053 .class_init = aspeed_machine_witherspoon_class_init, 1054 }, { 1055 .name = MACHINE_TYPE_NAME("ast2600-evb"), 1056 .parent = TYPE_ASPEED_MACHINE, 1057 .class_init = aspeed_machine_ast2600_evb_class_init, 1058 }, { 1059 .name = MACHINE_TYPE_NAME("tacoma-bmc"), 1060 .parent = TYPE_ASPEED_MACHINE, 1061 .class_init = aspeed_machine_tacoma_class_init, 1062 }, { 1063 .name = MACHINE_TYPE_NAME("g220a-bmc"), 1064 .parent = TYPE_ASPEED_MACHINE, 1065 .class_init = aspeed_machine_g220a_class_init, 1066 }, { 1067 .name = MACHINE_TYPE_NAME("quanta-q71l-bmc"), 1068 .parent = TYPE_ASPEED_MACHINE, 1069 .class_init = aspeed_machine_quanta_q71l_class_init, 1070 }, { 1071 .name = MACHINE_TYPE_NAME("rainier-bmc"), 1072 .parent = TYPE_ASPEED_MACHINE, 1073 .class_init = aspeed_machine_rainier_class_init, 1074 }, { 1075 .name = TYPE_ASPEED_MACHINE, 1076 .parent = TYPE_MACHINE, 1077 .instance_size = sizeof(AspeedMachineState), 1078 .instance_init = aspeed_machine_instance_init, 1079 .class_size = sizeof(AspeedMachineClass), 1080 .class_init = aspeed_machine_class_init, 1081 .abstract = true, 1082 } 1083 }; 1084 1085 DEFINE_TYPES(aspeed_machine_types) 1086