1 /* 2 * ARMV7M System emulation. 3 * 4 * Copyright (c) 2006-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "hw/sysbus.h" 11 #include "hw/arm/arm.h" 12 #include "hw/loader.h" 13 #include "elf.h" 14 15 /* Bitbanded IO. Each word corresponds to a single bit. */ 16 17 /* Get the byte address of the real memory for a bitband access. */ 18 static inline uint32_t bitband_addr(void * opaque, uint32_t addr) 19 { 20 uint32_t res; 21 22 res = *(uint32_t *)opaque; 23 res |= (addr & 0x1ffffff) >> 5; 24 return res; 25 26 } 27 28 static uint32_t bitband_readb(void *opaque, hwaddr offset) 29 { 30 uint8_t v; 31 cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); 32 return (v & (1 << ((offset >> 2) & 7))) != 0; 33 } 34 35 static void bitband_writeb(void *opaque, hwaddr offset, 36 uint32_t value) 37 { 38 uint32_t addr; 39 uint8_t mask; 40 uint8_t v; 41 addr = bitband_addr(opaque, offset); 42 mask = (1 << ((offset >> 2) & 7)); 43 cpu_physical_memory_read(addr, &v, 1); 44 if (value & 1) 45 v |= mask; 46 else 47 v &= ~mask; 48 cpu_physical_memory_write(addr, &v, 1); 49 } 50 51 static uint32_t bitband_readw(void *opaque, hwaddr offset) 52 { 53 uint32_t addr; 54 uint16_t mask; 55 uint16_t v; 56 addr = bitband_addr(opaque, offset) & ~1; 57 mask = (1 << ((offset >> 2) & 15)); 58 mask = tswap16(mask); 59 cpu_physical_memory_read(addr, &v, 2); 60 return (v & mask) != 0; 61 } 62 63 static void bitband_writew(void *opaque, hwaddr offset, 64 uint32_t value) 65 { 66 uint32_t addr; 67 uint16_t mask; 68 uint16_t v; 69 addr = bitband_addr(opaque, offset) & ~1; 70 mask = (1 << ((offset >> 2) & 15)); 71 mask = tswap16(mask); 72 cpu_physical_memory_read(addr, &v, 2); 73 if (value & 1) 74 v |= mask; 75 else 76 v &= ~mask; 77 cpu_physical_memory_write(addr, &v, 2); 78 } 79 80 static uint32_t bitband_readl(void *opaque, hwaddr offset) 81 { 82 uint32_t addr; 83 uint32_t mask; 84 uint32_t v; 85 addr = bitband_addr(opaque, offset) & ~3; 86 mask = (1 << ((offset >> 2) & 31)); 87 mask = tswap32(mask); 88 cpu_physical_memory_read(addr, &v, 4); 89 return (v & mask) != 0; 90 } 91 92 static void bitband_writel(void *opaque, hwaddr offset, 93 uint32_t value) 94 { 95 uint32_t addr; 96 uint32_t mask; 97 uint32_t v; 98 addr = bitband_addr(opaque, offset) & ~3; 99 mask = (1 << ((offset >> 2) & 31)); 100 mask = tswap32(mask); 101 cpu_physical_memory_read(addr, &v, 4); 102 if (value & 1) 103 v |= mask; 104 else 105 v &= ~mask; 106 cpu_physical_memory_write(addr, &v, 4); 107 } 108 109 static const MemoryRegionOps bitband_ops = { 110 .old_mmio = { 111 .read = { bitband_readb, bitband_readw, bitband_readl, }, 112 .write = { bitband_writeb, bitband_writew, bitband_writel, }, 113 }, 114 .endianness = DEVICE_NATIVE_ENDIAN, 115 }; 116 117 typedef struct { 118 SysBusDevice busdev; 119 MemoryRegion iomem; 120 uint32_t base; 121 } BitBandState; 122 123 static int bitband_init(SysBusDevice *dev) 124 { 125 BitBandState *s = FROM_SYSBUS(BitBandState, dev); 126 127 memory_region_init_io(&s->iomem, &bitband_ops, &s->base, "bitband", 128 0x02000000); 129 sysbus_init_mmio(dev, &s->iomem); 130 return 0; 131 } 132 133 static void armv7m_bitband_init(void) 134 { 135 DeviceState *dev; 136 137 dev = qdev_create(NULL, "ARM,bitband-memory"); 138 qdev_prop_set_uint32(dev, "base", 0x20000000); 139 qdev_init_nofail(dev); 140 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); 141 142 dev = qdev_create(NULL, "ARM,bitband-memory"); 143 qdev_prop_set_uint32(dev, "base", 0x40000000); 144 qdev_init_nofail(dev); 145 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); 146 } 147 148 /* Board init. */ 149 150 static void armv7m_reset(void *opaque) 151 { 152 ARMCPU *cpu = opaque; 153 154 cpu_reset(CPU(cpu)); 155 } 156 157 /* Init CPU and memory for a v7-M based board. 158 flash_size and sram_size are in kb. 159 Returns the NVIC array. */ 160 161 qemu_irq *armv7m_init(MemoryRegion *address_space_mem, 162 int flash_size, int sram_size, 163 const char *kernel_filename, const char *cpu_model) 164 { 165 ARMCPU *cpu; 166 CPUARMState *env; 167 DeviceState *nvic; 168 /* FIXME: make this local state. */ 169 static qemu_irq pic[64]; 170 qemu_irq *cpu_pic; 171 int image_size; 172 uint64_t entry; 173 uint64_t lowaddr; 174 int i; 175 int big_endian; 176 MemoryRegion *sram = g_new(MemoryRegion, 1); 177 MemoryRegion *flash = g_new(MemoryRegion, 1); 178 MemoryRegion *hack = g_new(MemoryRegion, 1); 179 180 flash_size *= 1024; 181 sram_size *= 1024; 182 183 if (cpu_model == NULL) { 184 cpu_model = "cortex-m3"; 185 } 186 cpu = cpu_arm_init(cpu_model); 187 if (cpu == NULL) { 188 fprintf(stderr, "Unable to find CPU definition\n"); 189 exit(1); 190 } 191 env = &cpu->env; 192 193 #if 0 194 /* > 32Mb SRAM gets complicated because it overlaps the bitband area. 195 We don't have proper commandline options, so allocate half of memory 196 as SRAM, up to a maximum of 32Mb, and the rest as code. */ 197 if (ram_size > (512 + 32) * 1024 * 1024) 198 ram_size = (512 + 32) * 1024 * 1024; 199 sram_size = (ram_size / 2) & TARGET_PAGE_MASK; 200 if (sram_size > 32 * 1024 * 1024) 201 sram_size = 32 * 1024 * 1024; 202 code_size = ram_size - sram_size; 203 #endif 204 205 /* Flash programming is done via the SCU, so pretend it is ROM. */ 206 memory_region_init_ram(flash, "armv7m.flash", flash_size); 207 vmstate_register_ram_global(flash); 208 memory_region_set_readonly(flash, true); 209 memory_region_add_subregion(address_space_mem, 0, flash); 210 memory_region_init_ram(sram, "armv7m.sram", sram_size); 211 vmstate_register_ram_global(sram); 212 memory_region_add_subregion(address_space_mem, 0x20000000, sram); 213 armv7m_bitband_init(); 214 215 nvic = qdev_create(NULL, "armv7m_nvic"); 216 env->nvic = nvic; 217 qdev_init_nofail(nvic); 218 cpu_pic = arm_pic_init_cpu(cpu); 219 sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, cpu_pic[ARM_PIC_CPU_IRQ]); 220 for (i = 0; i < 64; i++) { 221 pic[i] = qdev_get_gpio_in(nvic, i); 222 } 223 224 #ifdef TARGET_WORDS_BIGENDIAN 225 big_endian = 1; 226 #else 227 big_endian = 0; 228 #endif 229 230 if (!kernel_filename) { 231 fprintf(stderr, "Guest image must be specified (using -kernel)\n"); 232 exit(1); 233 } 234 235 image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, 236 NULL, big_endian, ELF_MACHINE, 1); 237 if (image_size < 0) { 238 image_size = load_image_targphys(kernel_filename, 0, flash_size); 239 lowaddr = 0; 240 } 241 if (image_size < 0) { 242 fprintf(stderr, "qemu: could not load kernel '%s'\n", 243 kernel_filename); 244 exit(1); 245 } 246 247 /* Hack to map an additional page of ram at the top of the address 248 space. This stops qemu complaining about executing code outside RAM 249 when returning from an exception. */ 250 memory_region_init_ram(hack, "armv7m.hack", 0x1000); 251 vmstate_register_ram_global(hack); 252 memory_region_add_subregion(address_space_mem, 0xfffff000, hack); 253 254 qemu_register_reset(armv7m_reset, cpu); 255 return pic; 256 } 257 258 static Property bitband_properties[] = { 259 DEFINE_PROP_UINT32("base", BitBandState, base, 0), 260 DEFINE_PROP_END_OF_LIST(), 261 }; 262 263 static void bitband_class_init(ObjectClass *klass, void *data) 264 { 265 DeviceClass *dc = DEVICE_CLASS(klass); 266 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 267 268 k->init = bitband_init; 269 dc->props = bitband_properties; 270 } 271 272 static const TypeInfo bitband_info = { 273 .name = "ARM,bitband-memory", 274 .parent = TYPE_SYS_BUS_DEVICE, 275 .instance_size = sizeof(BitBandState), 276 .class_init = bitband_class_init, 277 }; 278 279 static void armv7m_register_types(void) 280 { 281 type_register_static(&bitband_info); 282 } 283 284 type_init(armv7m_register_types) 285