1 /* 2 * QEMU Alpha DP264/CLIPPER hardware system emulator. 3 * 4 * Choose CLIPPER IRQ mappings over, say, DP264, MONET, or WEBBRICK 5 * variants because CLIPPER doesn't have an SMC669 SuperIO controller 6 * that we need to emulate as well. 7 */ 8 9 #include "hw/hw.h" 10 #include "elf.h" 11 #include "hw/loader.h" 12 #include "hw/boards.h" 13 #include "alpha_sys.h" 14 #include "sysemu/sysemu.h" 15 #include "hw/timer/mc146818rtc.h" 16 #include "hw/ide.h" 17 #include "hw/timer/i8254.h" 18 #include "hw/char/serial.h" 19 20 #define MAX_IDE_BUS 2 21 22 static uint64_t cpu_alpha_superpage_to_phys(void *opaque, uint64_t addr) 23 { 24 if (((addr >> 41) & 3) == 2) { 25 addr &= 0xffffffffffull; 26 } 27 return addr; 28 } 29 30 /* Note that there are at least 3 viewpoints of IRQ numbers on Alpha systems. 31 (0) The dev_irq_n lines into the cpu, which we totally ignore, 32 (1) The DRIR lines in the typhoon chipset, 33 (2) The "vector" aka mangled interrupt number reported by SRM PALcode, 34 (3) The interrupt number assigned by the kernel. 35 The following function is concerned with (1) only. */ 36 37 static int clipper_pci_map_irq(PCIDevice *d, int irq_num) 38 { 39 int slot = d->devfn >> 3; 40 41 assert(irq_num >= 0 && irq_num <= 3); 42 43 return (slot + 1) * 4 + irq_num; 44 } 45 46 static void clipper_init(MachineState *machine) 47 { 48 ram_addr_t ram_size = machine->ram_size; 49 const char *cpu_model = machine->cpu_model; 50 const char *kernel_filename = machine->kernel_filename; 51 const char *kernel_cmdline = machine->kernel_cmdline; 52 const char *initrd_filename = machine->initrd_filename; 53 AlphaCPU *cpus[4]; 54 PCIBus *pci_bus; 55 ISABus *isa_bus; 56 qemu_irq rtc_irq; 57 long size, i; 58 const char *palcode_filename; 59 uint64_t palcode_entry, palcode_low, palcode_high; 60 uint64_t kernel_entry, kernel_low, kernel_high; 61 62 /* Create up to 4 cpus. */ 63 memset(cpus, 0, sizeof(cpus)); 64 for (i = 0; i < smp_cpus; ++i) { 65 cpus[i] = cpu_alpha_init(cpu_model ? cpu_model : "ev67"); 66 } 67 68 cpus[0]->env.trap_arg0 = ram_size; 69 cpus[0]->env.trap_arg1 = 0; 70 cpus[0]->env.trap_arg2 = smp_cpus; 71 72 /* Init the chipset. */ 73 pci_bus = typhoon_init(ram_size, &isa_bus, &rtc_irq, cpus, 74 clipper_pci_map_irq); 75 76 /* Since we have an SRM-compatible PALcode, use the SRM epoch. */ 77 rtc_init(isa_bus, 1900, rtc_irq); 78 79 pit_init(isa_bus, 0x40, 0, NULL); 80 isa_create_simple(isa_bus, "i8042"); 81 82 /* VGA setup. Don't bother loading the bios. */ 83 pci_vga_init(pci_bus); 84 85 /* Serial code setup. */ 86 serial_hds_isa_init(isa_bus, MAX_SERIAL_PORTS); 87 88 /* Network setup. e1000 is good enough, failing Tulip support. */ 89 for (i = 0; i < nb_nics; i++) { 90 pci_nic_init_nofail(&nd_table[i], pci_bus, "e1000", NULL); 91 } 92 93 /* IDE disk setup. */ 94 { 95 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; 96 ide_drive_get(hd, ARRAY_SIZE(hd)); 97 98 pci_cmd646_ide_init(pci_bus, hd, 0); 99 } 100 101 /* Load PALcode. Given that this is not "real" cpu palcode, 102 but one explicitly written for the emulation, we might as 103 well load it directly from and ELF image. */ 104 palcode_filename = (bios_name ? bios_name : "palcode-clipper"); 105 palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, palcode_filename); 106 if (palcode_filename == NULL) { 107 hw_error("no palcode provided\n"); 108 exit(1); 109 } 110 size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys, 111 NULL, &palcode_entry, &palcode_low, &palcode_high, 112 0, EM_ALPHA, 0); 113 if (size < 0) { 114 hw_error("could not load palcode '%s'\n", palcode_filename); 115 exit(1); 116 } 117 118 /* Start all cpus at the PALcode RESET entry point. */ 119 for (i = 0; i < smp_cpus; ++i) { 120 cpus[i]->env.pal_mode = 1; 121 cpus[i]->env.pc = palcode_entry; 122 cpus[i]->env.palbr = palcode_entry; 123 } 124 125 /* Load a kernel. */ 126 if (kernel_filename) { 127 uint64_t param_offset; 128 129 size = load_elf(kernel_filename, cpu_alpha_superpage_to_phys, 130 NULL, &kernel_entry, &kernel_low, &kernel_high, 131 0, EM_ALPHA, 0); 132 if (size < 0) { 133 hw_error("could not load kernel '%s'\n", kernel_filename); 134 exit(1); 135 } 136 137 cpus[0]->env.trap_arg1 = kernel_entry; 138 139 param_offset = kernel_low - 0x6000; 140 141 if (kernel_cmdline) { 142 pstrcpy_targphys("cmdline", param_offset, 0x100, kernel_cmdline); 143 } 144 145 if (initrd_filename) { 146 long initrd_base, initrd_size; 147 148 initrd_size = get_image_size(initrd_filename); 149 if (initrd_size < 0) { 150 hw_error("could not load initial ram disk '%s'\n", 151 initrd_filename); 152 exit(1); 153 } 154 155 /* Put the initrd image as high in memory as possible. */ 156 initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK; 157 load_image_targphys(initrd_filename, initrd_base, 158 ram_size - initrd_base); 159 160 stq_phys(&address_space_memory, 161 param_offset + 0x100, initrd_base + 0xfffffc0000000000ULL); 162 stq_phys(&address_space_memory, param_offset + 0x108, initrd_size); 163 } 164 } 165 } 166 167 static QEMUMachine clipper_machine = { 168 .name = "clipper", 169 .desc = "Alpha DP264/CLIPPER", 170 .init = clipper_init, 171 .max_cpus = 4, 172 .is_default = 1, 173 }; 174 175 static void clipper_machine_init(void) 176 { 177 qemu_register_machine(&clipper_machine); 178 } 179 180 machine_init(clipper_machine_init); 181