xref: /openbmc/qemu/hw/alpha/dp264.c (revision 2fc979cb)
1 /*
2  * QEMU Alpha DP264/CLIPPER hardware system emulator.
3  *
4  * Choose CLIPPER IRQ mappings over, say, DP264, MONET, or WEBBRICK
5  * variants because CLIPPER doesn't have an SMC669 SuperIO controller
6  * that we need to emulate as well.
7  */
8 
9 #include "qemu/osdep.h"
10 #include "qemu-common.h"
11 #include "cpu.h"
12 #include "elf.h"
13 #include "hw/loader.h"
14 #include "alpha_sys.h"
15 #include "qemu/error-report.h"
16 #include "sysemu/sysemu.h"
17 #include "hw/rtc/mc146818rtc.h"
18 #include "hw/ide/pci.h"
19 #include "hw/timer/i8254.h"
20 #include "hw/isa/superio.h"
21 #include "hw/dma/i8257.h"
22 #include "net/net.h"
23 #include "qemu/cutils.h"
24 #include "net/net.h"
25 
26 #define MAX_IDE_BUS 2
27 
28 static uint64_t cpu_alpha_superpage_to_phys(void *opaque, uint64_t addr)
29 {
30     if (((addr >> 41) & 3) == 2) {
31         addr &= 0xffffffffffull;
32     }
33     return addr;
34 }
35 
36 /* Note that there are at least 3 viewpoints of IRQ numbers on Alpha systems.
37     (0) The dev_irq_n lines into the cpu, which we totally ignore,
38     (1) The DRIR lines in the typhoon chipset,
39     (2) The "vector" aka mangled interrupt number reported by SRM PALcode,
40     (3) The interrupt number assigned by the kernel.
41    The following function is concerned with (1) only.  */
42 
43 static int clipper_pci_map_irq(PCIDevice *d, int irq_num)
44 {
45     int slot = d->devfn >> 3;
46 
47     assert(irq_num >= 0 && irq_num <= 3);
48 
49     return (slot + 1) * 4 + irq_num;
50 }
51 
52 static void clipper_init(MachineState *machine)
53 {
54     ram_addr_t ram_size = machine->ram_size;
55     const char *kernel_filename = machine->kernel_filename;
56     const char *kernel_cmdline = machine->kernel_cmdline;
57     const char *initrd_filename = machine->initrd_filename;
58     AlphaCPU *cpus[4];
59     PCIBus *pci_bus;
60     PCIDevice *pci_dev;
61     ISABus *isa_bus;
62     qemu_irq rtc_irq;
63     long size, i;
64     char *palcode_filename;
65     uint64_t palcode_entry, palcode_low, palcode_high;
66     uint64_t kernel_entry, kernel_low, kernel_high;
67     unsigned int smp_cpus = machine->smp.cpus;
68 
69     /* Create up to 4 cpus.  */
70     memset(cpus, 0, sizeof(cpus));
71     for (i = 0; i < smp_cpus; ++i) {
72         cpus[i] = ALPHA_CPU(cpu_create(machine->cpu_type));
73     }
74 
75     cpus[0]->env.trap_arg0 = ram_size;
76     cpus[0]->env.trap_arg1 = 0;
77     cpus[0]->env.trap_arg2 = smp_cpus;
78 
79     /* Init the chipset.  */
80     pci_bus = typhoon_init(machine->ram, &isa_bus, &rtc_irq, cpus,
81                            clipper_pci_map_irq);
82 
83     /* Since we have an SRM-compatible PALcode, use the SRM epoch.  */
84     mc146818_rtc_init(isa_bus, 1900, rtc_irq);
85 
86     i8254_pit_init(isa_bus, 0x40, 0, NULL);
87 
88     /* VGA setup.  Don't bother loading the bios.  */
89     pci_vga_init(pci_bus);
90 
91     /* Network setup.  e1000 is good enough, failing Tulip support.  */
92     for (i = 0; i < nb_nics; i++) {
93         pci_nic_init_nofail(&nd_table[i], pci_bus, "e1000", NULL);
94     }
95 
96     /* 2 82C37 (dma) */
97     isa_create_simple(isa_bus, "i82374");
98 
99     /* Super I/O */
100     isa_create_simple(isa_bus, TYPE_SMC37C669_SUPERIO);
101 
102     /* IDE disk setup.  */
103     pci_dev = pci_create_simple(pci_bus, -1, "cmd646-ide");
104     pci_ide_create_devs(pci_dev);
105 
106     /* Load PALcode.  Given that this is not "real" cpu palcode,
107        but one explicitly written for the emulation, we might as
108        well load it directly from and ELF image.  */
109     palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
110                                 bios_name ? bios_name : "palcode-clipper");
111     if (palcode_filename == NULL) {
112         error_report("no palcode provided");
113         exit(1);
114     }
115     size = load_elf(palcode_filename, NULL, cpu_alpha_superpage_to_phys,
116                     NULL, &palcode_entry, &palcode_low, &palcode_high, NULL,
117                     0, EM_ALPHA, 0, 0);
118     if (size < 0) {
119         error_report("could not load palcode '%s'", palcode_filename);
120         exit(1);
121     }
122     g_free(palcode_filename);
123 
124     /* Start all cpus at the PALcode RESET entry point.  */
125     for (i = 0; i < smp_cpus; ++i) {
126         cpus[i]->env.pc = palcode_entry;
127         cpus[i]->env.palbr = palcode_entry;
128     }
129 
130     /* Load a kernel.  */
131     if (kernel_filename) {
132         uint64_t param_offset;
133 
134         size = load_elf(kernel_filename, NULL, cpu_alpha_superpage_to_phys,
135                         NULL, &kernel_entry, &kernel_low, &kernel_high, NULL,
136                         0, EM_ALPHA, 0, 0);
137         if (size < 0) {
138             error_report("could not load kernel '%s'", kernel_filename);
139             exit(1);
140         }
141 
142         cpus[0]->env.trap_arg1 = kernel_entry;
143 
144         param_offset = kernel_low - 0x6000;
145 
146         if (kernel_cmdline) {
147             pstrcpy_targphys("cmdline", param_offset, 0x100, kernel_cmdline);
148         }
149 
150         if (initrd_filename) {
151             long initrd_base;
152             int64_t initrd_size;
153 
154             initrd_size = get_image_size(initrd_filename);
155             if (initrd_size < 0) {
156                 error_report("could not load initial ram disk '%s'",
157                              initrd_filename);
158                 exit(1);
159             }
160 
161             /* Put the initrd image as high in memory as possible.  */
162             initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
163             load_image_targphys(initrd_filename, initrd_base,
164                                 ram_size - initrd_base);
165 
166             address_space_stq(&address_space_memory, param_offset + 0x100,
167                               initrd_base + 0xfffffc0000000000ULL,
168                               MEMTXATTRS_UNSPECIFIED,
169                               NULL);
170             address_space_stq(&address_space_memory, param_offset + 0x108,
171                               initrd_size, MEMTXATTRS_UNSPECIFIED, NULL);
172         }
173     }
174 }
175 
176 static void clipper_machine_init(MachineClass *mc)
177 {
178     mc->desc = "Alpha DP264/CLIPPER";
179     mc->init = clipper_init;
180     mc->block_default_type = IF_IDE;
181     mc->max_cpus = 4;
182     mc->is_default = true;
183     mc->default_cpu_type = ALPHA_CPU_TYPE_NAME("ev67");
184     mc->default_ram_id = "ram";
185 }
186 
187 DEFINE_MACHINE("clipper", clipper_machine_init)
188