xref: /openbmc/qemu/hw/acpi/cpu_hotplug.c (revision 502d0f36)
1 /*
2  * QEMU ACPI hotplug utilities
3  *
4  * Copyright (C) 2013 Red Hat Inc
5  *
6  * Authors:
7  *   Igor Mammedov <imammedo@redhat.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2 or later.
10  * See the COPYING file in the top-level directory.
11  */
12 #include "qemu/osdep.h"
13 #include "hw/hw.h"
14 #include "hw/acpi/cpu_hotplug.h"
15 #include "qapi/error.h"
16 #include "qom/cpu.h"
17 #include "hw/i386/pc.h"
18 #include "qemu/error-report.h"
19 
20 #define CPU_EJECT_METHOD "CPEJ"
21 #define CPU_MAT_METHOD "CPMA"
22 #define CPU_ON_BITMAP "CPON"
23 #define CPU_STATUS_METHOD "CPST"
24 #define CPU_STATUS_MAP "PRS"
25 #define CPU_SCAN_METHOD "PRSC"
26 
27 static uint64_t cpu_status_read(void *opaque, hwaddr addr, unsigned int size)
28 {
29     AcpiCpuHotplug *cpus = opaque;
30     uint64_t val = cpus->sts[addr];
31 
32     return val;
33 }
34 
35 static void cpu_status_write(void *opaque, hwaddr addr, uint64_t data,
36                              unsigned int size)
37 {
38     /* firmware never used to write in CPU present bitmap so use
39        this fact as means to switch QEMU into modern CPU hotplug
40        mode by writing 0 at the beginning of legacy CPU bitmap
41      */
42     if (addr == 0 && data == 0) {
43         AcpiCpuHotplug *cpus = opaque;
44         object_property_set_bool(cpus->device, false, "cpu-hotplug-legacy",
45                                  &error_abort);
46     }
47 }
48 
49 static const MemoryRegionOps AcpiCpuHotplug_ops = {
50     .read = cpu_status_read,
51     .write = cpu_status_write,
52     .endianness = DEVICE_LITTLE_ENDIAN,
53     .valid = {
54         .min_access_size = 1,
55         .max_access_size = 1,
56     },
57 };
58 
59 static void acpi_set_cpu_present_bit(AcpiCpuHotplug *g, CPUState *cpu,
60                                      Error **errp)
61 {
62     CPUClass *k = CPU_GET_CLASS(cpu);
63     int64_t cpu_id;
64 
65     cpu_id = k->get_arch_id(cpu);
66     if ((cpu_id / 8) >= ACPI_GPE_PROC_LEN) {
67         object_property_set_bool(g->device, false, "cpu-hotplug-legacy",
68                                  &error_abort);
69         return;
70     }
71 
72     g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
73 }
74 
75 void legacy_acpi_cpu_plug_cb(HotplugHandler *hotplug_dev,
76                              AcpiCpuHotplug *g, DeviceState *dev, Error **errp)
77 {
78     acpi_set_cpu_present_bit(g, CPU(dev), errp);
79     if (*errp != NULL) {
80         return;
81     }
82     acpi_send_event(DEVICE(hotplug_dev), ACPI_CPU_HOTPLUG_STATUS);
83 }
84 
85 void legacy_acpi_cpu_hotplug_init(MemoryRegion *parent, Object *owner,
86                                   AcpiCpuHotplug *gpe_cpu, uint16_t base)
87 {
88     CPUState *cpu;
89 
90     memory_region_init_io(&gpe_cpu->io, owner, &AcpiCpuHotplug_ops,
91                           gpe_cpu, "acpi-cpu-hotplug", ACPI_GPE_PROC_LEN);
92     memory_region_add_subregion(parent, base, &gpe_cpu->io);
93     gpe_cpu->device = owner;
94 
95     CPU_FOREACH(cpu) {
96         acpi_set_cpu_present_bit(gpe_cpu, cpu, &error_abort);
97     }
98 }
99 
100 void acpi_switch_to_modern_cphp(AcpiCpuHotplug *gpe_cpu,
101                                 CPUHotplugState *cpuhp_state,
102                                 uint16_t io_port)
103 {
104     MemoryRegion *parent = pci_address_space_io(PCI_DEVICE(gpe_cpu->device));
105 
106     memory_region_del_subregion(parent, &gpe_cpu->io);
107     cpu_hotplug_hw_init(parent, gpe_cpu->device, cpuhp_state, io_port);
108 }
109 
110 void build_legacy_cpu_hotplug_aml(Aml *ctx, MachineState *machine,
111                                   uint16_t io_base)
112 {
113     Aml *dev;
114     Aml *crs;
115     Aml *pkg;
116     Aml *field;
117     Aml *method;
118     Aml *if_ctx;
119     Aml *else_ctx;
120     int i, apic_idx;
121     Aml *sb_scope = aml_scope("_SB");
122     uint8_t madt_tmpl[8] = {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0};
123     Aml *cpu_id = aml_arg(1);
124     Aml *apic_id = aml_arg(0);
125     Aml *cpu_on = aml_local(0);
126     Aml *madt = aml_local(1);
127     Aml *cpus_map = aml_name(CPU_ON_BITMAP);
128     Aml *zero = aml_int(0);
129     Aml *one = aml_int(1);
130     MachineClass *mc = MACHINE_GET_CLASS(machine);
131     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(machine);
132     PCMachineState *pcms = PC_MACHINE(machine);
133 
134     /*
135      * _MAT method - creates an madt apic buffer
136      * apic_id = Arg0 = Local APIC ID
137      * cpu_id  = Arg1 = Processor ID
138      * cpu_on = Local0 = CPON flag for this cpu
139      * madt = Local1 = Buffer (in madt apic form) to return
140      */
141     method = aml_method(CPU_MAT_METHOD, 2, AML_NOTSERIALIZED);
142     aml_append(method,
143         aml_store(aml_derefof(aml_index(cpus_map, apic_id)), cpu_on));
144     aml_append(method,
145         aml_store(aml_buffer(sizeof(madt_tmpl), madt_tmpl), madt));
146     /* Update the processor id, lapic id, and enable/disable status */
147     aml_append(method, aml_store(cpu_id, aml_index(madt, aml_int(2))));
148     aml_append(method, aml_store(apic_id, aml_index(madt, aml_int(3))));
149     aml_append(method, aml_store(cpu_on, aml_index(madt, aml_int(4))));
150     aml_append(method, aml_return(madt));
151     aml_append(sb_scope, method);
152 
153     /*
154      * _STA method - return ON status of cpu
155      * apic_id = Arg0 = Local APIC ID
156      * cpu_on = Local0 = CPON flag for this cpu
157      */
158     method = aml_method(CPU_STATUS_METHOD, 1, AML_NOTSERIALIZED);
159     aml_append(method,
160         aml_store(aml_derefof(aml_index(cpus_map, apic_id)), cpu_on));
161     if_ctx = aml_if(cpu_on);
162     {
163         aml_append(if_ctx, aml_return(aml_int(0xF)));
164     }
165     aml_append(method, if_ctx);
166     else_ctx = aml_else();
167     {
168         aml_append(else_ctx, aml_return(zero));
169     }
170     aml_append(method, else_ctx);
171     aml_append(sb_scope, method);
172 
173     method = aml_method(CPU_EJECT_METHOD, 2, AML_NOTSERIALIZED);
174     aml_append(method, aml_sleep(200));
175     aml_append(sb_scope, method);
176 
177     method = aml_method(CPU_SCAN_METHOD, 0, AML_NOTSERIALIZED);
178     {
179         Aml *while_ctx, *if_ctx2, *else_ctx2;
180         Aml *bus_check_evt = aml_int(1);
181         Aml *remove_evt = aml_int(3);
182         Aml *status_map = aml_local(5); /* Local5 = active cpu bitmap */
183         Aml *byte = aml_local(2); /* Local2 = last read byte from bitmap */
184         Aml *idx = aml_local(0); /* Processor ID / APIC ID iterator */
185         Aml *is_cpu_on = aml_local(1); /* Local1 = CPON flag for cpu */
186         Aml *status = aml_local(3); /* Local3 = active state for cpu */
187 
188         aml_append(method, aml_store(aml_name(CPU_STATUS_MAP), status_map));
189         aml_append(method, aml_store(zero, byte));
190         aml_append(method, aml_store(zero, idx));
191 
192         /* While (idx < SizeOf(CPON)) */
193         while_ctx = aml_while(aml_lless(idx, aml_sizeof(cpus_map)));
194         aml_append(while_ctx,
195             aml_store(aml_derefof(aml_index(cpus_map, idx)), is_cpu_on));
196 
197         if_ctx = aml_if(aml_and(idx, aml_int(0x07), NULL));
198         {
199             /* Shift down previously read bitmap byte */
200             aml_append(if_ctx, aml_shiftright(byte, one, byte));
201         }
202         aml_append(while_ctx, if_ctx);
203 
204         else_ctx = aml_else();
205         {
206             /* Read next byte from cpu bitmap */
207             aml_append(else_ctx, aml_store(aml_derefof(aml_index(status_map,
208                        aml_shiftright(idx, aml_int(3), NULL))), byte));
209         }
210         aml_append(while_ctx, else_ctx);
211 
212         aml_append(while_ctx, aml_store(aml_and(byte, one, NULL), status));
213         if_ctx = aml_if(aml_lnot(aml_equal(is_cpu_on, status)));
214         {
215             /* State change - update CPON with new state */
216             aml_append(if_ctx, aml_store(status, aml_index(cpus_map, idx)));
217             if_ctx2 = aml_if(aml_equal(status, one));
218             {
219                 aml_append(if_ctx2,
220                     aml_call2(AML_NOTIFY_METHOD, idx, bus_check_evt));
221             }
222             aml_append(if_ctx, if_ctx2);
223             else_ctx2 = aml_else();
224             {
225                 aml_append(else_ctx2,
226                     aml_call2(AML_NOTIFY_METHOD, idx, remove_evt));
227             }
228         }
229         aml_append(if_ctx, else_ctx2);
230         aml_append(while_ctx, if_ctx);
231 
232         aml_append(while_ctx, aml_increment(idx)); /* go to next cpu */
233         aml_append(method, while_ctx);
234     }
235     aml_append(sb_scope, method);
236 
237     /* The current AML generator can cover the APIC ID range [0..255],
238      * inclusive, for VCPU hotplug. */
239     QEMU_BUILD_BUG_ON(ACPI_CPU_HOTPLUG_ID_LIMIT > 256);
240     if (pcms->apic_id_limit > ACPI_CPU_HOTPLUG_ID_LIMIT) {
241         error_report("max_cpus is too large. APIC ID of last CPU is %u",
242                      pcms->apic_id_limit - 1);
243         exit(1);
244     }
245 
246     /* create PCI0.PRES device and its _CRS to reserve CPU hotplug MMIO */
247     dev = aml_device("PCI0." stringify(CPU_HOTPLUG_RESOURCE_DEVICE));
248     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A06")));
249     aml_append(dev,
250         aml_name_decl("_UID", aml_string("CPU Hotplug resources"))
251     );
252     /* device present, functioning, decoding, not shown in UI */
253     aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
254     crs = aml_resource_template();
255     aml_append(crs,
256         aml_io(AML_DECODE16, io_base, io_base, 1, ACPI_GPE_PROC_LEN)
257     );
258     aml_append(dev, aml_name_decl("_CRS", crs));
259     aml_append(sb_scope, dev);
260     /* declare CPU hotplug MMIO region and PRS field to access it */
261     aml_append(sb_scope, aml_operation_region(
262         "PRST", AML_SYSTEM_IO, aml_int(io_base), ACPI_GPE_PROC_LEN));
263     field = aml_field("PRST", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE);
264     aml_append(field, aml_named_field("PRS", 256));
265     aml_append(sb_scope, field);
266 
267     /* build Processor object for each processor */
268     for (i = 0; i < apic_ids->len; i++) {
269         int apic_id = apic_ids->cpus[i].arch_id;
270 
271         assert(apic_id < ACPI_CPU_HOTPLUG_ID_LIMIT);
272 
273         dev = aml_processor(i, 0, 0, "CP%.02X", apic_id);
274 
275         method = aml_method("_MAT", 0, AML_NOTSERIALIZED);
276         aml_append(method,
277             aml_return(aml_call2(CPU_MAT_METHOD, aml_int(apic_id), aml_int(i))
278         ));
279         aml_append(dev, method);
280 
281         method = aml_method("_STA", 0, AML_NOTSERIALIZED);
282         aml_append(method,
283             aml_return(aml_call1(CPU_STATUS_METHOD, aml_int(apic_id))));
284         aml_append(dev, method);
285 
286         method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
287         aml_append(method,
288             aml_return(aml_call2(CPU_EJECT_METHOD, aml_int(apic_id),
289                 aml_arg(0)))
290         );
291         aml_append(dev, method);
292 
293         aml_append(sb_scope, dev);
294     }
295 
296     /* build this code:
297      *   Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}
298      */
299     /* Arg0 = APIC ID */
300     method = aml_method(AML_NOTIFY_METHOD, 2, AML_NOTSERIALIZED);
301     for (i = 0; i < apic_ids->len; i++) {
302         int apic_id = apic_ids->cpus[i].arch_id;
303 
304         if_ctx = aml_if(aml_equal(aml_arg(0), aml_int(apic_id)));
305         aml_append(if_ctx,
306             aml_notify(aml_name("CP%.02X", apic_id), aml_arg(1))
307         );
308         aml_append(method, if_ctx);
309     }
310     aml_append(sb_scope, method);
311 
312     /* build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... })"
313      *
314      * Note: The ability to create variable-sized packages was first
315      * introduced in ACPI 2.0. ACPI 1.0 only allowed fixed-size packages
316      * ith up to 255 elements. Windows guests up to win2k8 fail when
317      * VarPackageOp is used.
318      */
319     pkg = pcms->apic_id_limit <= 255 ? aml_package(pcms->apic_id_limit) :
320                                        aml_varpackage(pcms->apic_id_limit);
321 
322     for (i = 0, apic_idx = 0; i < apic_ids->len; i++) {
323         int apic_id = apic_ids->cpus[i].arch_id;
324 
325         for (; apic_idx < apic_id; apic_idx++) {
326             aml_append(pkg, aml_int(0));
327         }
328         aml_append(pkg, aml_int(apic_ids->cpus[i].cpu ? 1 : 0));
329         apic_idx = apic_id + 1;
330     }
331     aml_append(sb_scope, aml_name_decl(CPU_ON_BITMAP, pkg));
332     aml_append(ctx, sb_scope);
333 
334     method = aml_method("\\_GPE._E02", 0, AML_NOTSERIALIZED);
335     aml_append(method, aml_call0("\\_SB." CPU_SCAN_METHOD));
336     aml_append(ctx, method);
337 }
338