1=Specification= 2 3The file format looks like this: 4 5 +----------+----------+----------+-----+ 6 | cluster0 | cluster1 | cluster2 | ... | 7 +----------+----------+----------+-----+ 8 9The first cluster begins with the '''header'''. The header contains information about where regular clusters start; this allows the header to be extensible and store extra information about the image file. A regular cluster may be a '''data cluster''', an '''L2''', or an '''L1 table'''. L1 and L2 tables are composed of one or more contiguous clusters. 10 11Normally the file size will be a multiple of the cluster size. If the file size is not a multiple, extra information after the last cluster may not be preserved if data is written. Legitimate extra information should use space between the header and the first regular cluster. 12 13All fields are little-endian. 14 15==Header== 16 Header { 17 uint32_t magic; /* QED\0 */ 18 19 uint32_t cluster_size; /* in bytes */ 20 uint32_t table_size; /* for L1 and L2 tables, in clusters */ 21 uint32_t header_size; /* in clusters */ 22 23 uint64_t features; /* format feature bits */ 24 uint64_t compat_features; /* compat feature bits */ 25 uint64_t autoclear_features; /* self-resetting feature bits */ 26 27 uint64_t l1_table_offset; /* in bytes */ 28 uint64_t image_size; /* total logical image size, in bytes */ 29 30 /* if (features & QED_F_BACKING_FILE) */ 31 uint32_t backing_filename_offset; /* in bytes from start of header */ 32 uint32_t backing_filename_size; /* in bytes */ 33 } 34 35Field descriptions: 36* ''cluster_size'' must be a power of 2 in range [2^12, 2^26]. 37* ''table_size'' must be a power of 2 in range [1, 16]. 38* ''header_size'' is the number of clusters used by the header and any additional information stored before regular clusters. 39* ''features'', ''compat_features'', and ''autoclear_features'' are file format extension bitmaps. They work as follows: 40** An image with unknown ''features'' bits enabled must not be opened. File format changes that are not backwards-compatible must use ''features'' bits. 41** An image with unknown ''compat_features'' bits enabled can be opened safely. The unknown features are simply ignored and represent backwards-compatible changes to the file format. 42** An image with unknown ''autoclear_features'' bits enable can be opened safely after clearing the unknown bits. This allows for backwards-compatible changes to the file format which degrade gracefully and can be re-enabled again by a new program later. 43* ''l1_table_offset'' is the offset of the first byte of the L1 table in the image file and must be a multiple of ''cluster_size''. 44* ''image_size'' is the block device size seen by the guest and must be a multiple of 512 bytes. 45* ''backing_filename_offset'' and ''backing_filename_size'' describe a string in (byte offset, byte size) form. It is not NUL-terminated and has no alignment constraints. The string must be stored within the first ''header_size'' clusters. The backing filename may be an absolute path or relative to the image file. 46 47Feature bits: 48* QED_F_BACKING_FILE = 0x01. The image uses a backing file. 49* QED_F_NEED_CHECK = 0x02. The image needs a consistency check before use. 50* QED_F_BACKING_FORMAT_NO_PROBE = 0x04. The backing file is a raw disk image and no file format autodetection should be attempted. This should be used to ensure that raw backing files are never detected as an image format if they happen to contain magic constants. 51 52There are currently no defined ''compat_features'' or ''autoclear_features'' bits. 53 54Fields predicated on a feature bit are only used when that feature is set. The fields always take up header space, regardless of whether or not the feature bit is set. 55 56==Tables== 57 58Tables provide the translation from logical offsets in the block device to cluster offsets in the file. 59 60 #define TABLE_NOFFSETS (table_size * cluster_size / sizeof(uint64_t)) 61 62 Table { 63 uint64_t offsets[TABLE_NOFFSETS]; 64 } 65 66The tables are organized as follows: 67 68 +----------+ 69 | L1 table | 70 +----------+ 71 ,------' | '------. 72 +----------+ | +----------+ 73 | L2 table | ... | L2 table | 74 +----------+ +----------+ 75 ,------' | '------. 76 +----------+ | +----------+ 77 | Data | ... | Data | 78 +----------+ +----------+ 79 80A table is made up of one or more contiguous clusters. The table_size header field determines table size for an image file. For example, cluster_size=64 KB and table_size=4 results in 256 KB tables. 81 82The logical image size must be less than or equal to the maximum possible size of clusters rooted by the L1 table: 83 header.image_size <= TABLE_NOFFSETS * TABLE_NOFFSETS * header.cluster_size 84 85L1, L2, and data cluster offsets must be aligned to header.cluster_size. The following offsets have special meanings: 86 87===L2 table offsets=== 88* 0 - unallocated. The L2 table is not yet allocated. 89 90===Data cluster offsets=== 91* 0 - unallocated. The data cluster is not yet allocated. 92* 1 - zero. The data cluster contents are all zeroes and no cluster is allocated. 93 94Future format extensions may wish to store per-offset information. The least significant 12 bits of an offset are reserved for this purpose and must be set to zero. Image files with cluster_size > 2^12 will have more unused bits which should also be zeroed. 95 96===Unallocated L2 tables and data clusters=== 97Reads to an unallocated area of the image file access the backing file. If there is no backing file, then zeroes are produced. The backing file may be smaller than the image file and reads of unallocated areas beyond the end of the backing file produce zeroes. 98 99Writes to an unallocated area cause a new data clusters to be allocated, and a new L2 table if that is also unallocated. The new data cluster is populated with data from the backing file (or zeroes if no backing file) and the data being written. 100 101===Zero data clusters=== 102Zero data clusters are a space-efficient way of storing zeroed regions of the image. 103 104Reads to a zero data cluster produce zeroes. Note that the difference between an unallocated and a zero data cluster is that zero data clusters stop the reading of contents from the backing file. 105 106Writes to a zero data cluster cause a new data cluster to be allocated. The new data cluster is populated with zeroes and the data being written. 107 108===Logical offset translation=== 109Logical offsets are translated into cluster offsets as follows: 110 111 table_bits table_bits cluster_bits 112 <--------> <--------> <---------------> 113 +----------+----------+-----------------+ 114 | L1 index | L2 index | byte offset | 115 +----------+----------+-----------------+ 116 117 Structure of a logical offset 118 119 offset_mask = ~(cluster_size - 1) # mask for the image file byte offset 120 121 def logical_to_cluster_offset(l1_index, l2_index, byte_offset): 122 l2_offset = l1_table[l1_index] 123 l2_table = load_table(l2_offset) 124 cluster_offset = l2_table[l2_index] & offset_mask 125 return cluster_offset + byte_offset 126 127==Consistency checking== 128 129This section is informational and included to provide background on the use of the QED_F_NEED_CHECK ''features'' bit. 130 131The QED_F_NEED_CHECK bit is used to mark an image as dirty before starting an operation that could leave the image in an inconsistent state if interrupted by a crash or power failure. A dirty image must be checked on open because its metadata may not be consistent. 132 133Consistency check includes the following invariants: 134# Each cluster is referenced once and only once. It is an inconsistency to have a cluster referenced more than once by L1 or L2 tables. A cluster has been leaked if it has no references. 135# Offsets must be within the image file size and must be ''cluster_size'' aligned. 136# Table offsets must at least ''table_size'' * ''cluster_size'' bytes from the end of the image file so that there is space for the entire table. 137 138The consistency check process starts by from ''l1_table_offset'' and scans all L2 tables. After the check completes with no other errors besides leaks, the QED_F_NEED_CHECK bit can be cleared and the image can be accessed. 139