1# mach-virt - VirtIO guest (serial console)
2# =========================================================
3#
4# Usage:
5#
6#   $ qemu-system-aarch64 \
7#     -nodefaults \
8#     -readconfig mach-virt-serial.cfg \
9#     -display none -serial mon:stdio \
10#     -cpu host
11#
12# You will probably need to tweak the lines marked as
13# CHANGE ME before being able to use this configuration!
14#
15# The guest will have a selection of VirtIO devices
16# tailored towards optimal performance with modern guests,
17# and will be accessed through the serial console.
18#
19# ---------------------------------------------------------
20#
21# Using -nodefaults is required to have full control over
22# the virtual hardware: when it's specified, QEMU will
23# populate the board with only the builtin peripherals,
24# such as the PL011 UART, plus a PCI Express Root Bus; the
25# user will then have to explicitly add further devices.
26#
27# The PCI Express Root Bus shows up in the guest as:
28#
29#   00:00.0 Host bridge
30#
31# This configuration file adds a number of other useful
32# devices, more specifically:
33#
34#   00.1c.* PCI bridge (PCI Express Root Ports)
35#   01:00.0 SCSI storage controller
36#   02:00.0 Ethernet controller
37#
38# More information about these devices is available below.
39#
40# We use '-display none' to prevent QEMU from creating a
41# graphical display window, which would serve no use in
42# this specific configuration, and '-serial mon:stdio' to
43# multiplex the guest's serial console and the QEMU monitor
44# to the host's stdio; use 'Ctrl+A h' to learn how to
45# switch between the two and more.
46
47
48# Machine options
49# =========================================================
50#
51# We use the virt machine type and enable KVM acceleration
52# for better performance.
53#
54# Using less than 1 GiB of memory is probably not going to
55# yield good performance in the guest, and might even lead
56# to obscure boot issues in some cases.
57#
58# Unfortunately, there is no way to configure the CPU model
59# in this file, so it will have to be provided on the
60# command line, but we can configure the guest to use the
61# same GIC version as the host.
62
63[machine]
64  type = "virt"
65  accel = "kvm"
66  gic-version = "host"
67
68[memory]
69  size = "1024"
70
71
72# Firmware configuration
73# =========================================================
74#
75# There are two parts to the firmware: a read-only image
76# containing the executable code, which is shared between
77# guests, and a read/write variable store that is owned
78# by one specific guest, exclusively, and is used to
79# record information such as the UEFI boot order.
80#
81# For any new guest, its permanent, private variable store
82# should initially be copied from the template file
83# provided along with the firmware binary.
84#
85# Depending on the OS distribution you're using on the
86# host, the name of the package containing the firmware
87# binary and variable store template, as well as the paths
88# to the files themselves, will be different. For example:
89#
90# Fedora
91#   edk2-aarch64                                      (pkg)
92#   /usr/share/edk2/aarch64/QEMU_EFI-pflash.raw       (bin)
93#   /usr/share/edk2/aarch64/vars-template-pflash.raw  (var)
94#
95# RHEL
96#   AAVMF                                             (pkg)
97#   /usr/share/AAVMF/AAVMF_CODE.fd                    (bin)
98#   /usr/share/AAVMF/AAVMF_VARS.fd                    (var)
99#
100# Debian/Ubuntu
101#   qemu-efi                                          (pkg)
102#   /usr/share/AAVMF/AAVMF_CODE.fd                    (bin)
103#   /usr/share/AAVMF/AAVMF_VARS.fd                    (var)
104
105[drive "uefi-binary"]
106  file = "/usr/share/AAVMF/AAVMF_CODE.fd"       # CHANGE ME
107  format = "raw"
108  if = "pflash"
109  unit = "0"
110  readonly = "on"
111
112[drive "uefi-varstore"]
113  file = "guest_VARS.fd"                        # CHANGE ME
114  format = "raw"
115  if = "pflash"
116  unit = "1"
117
118
119# PCI bridge (PCI Express Root Ports)
120# =========================================================
121#
122# We create eight PCI Express Root Ports, and we plug them
123# all into separate functions of the same slot. Some of
124# them will be used by devices, the rest will remain
125# available for hotplug.
126
127[device "pcie.1"]
128  driver = "pcie-root-port"
129  bus = "pcie.0"
130  addr = "1c.0"
131  port = "1"
132  chassis = "1"
133  multifunction = "on"
134
135[device "pcie.2"]
136  driver = "pcie-root-port"
137  bus = "pcie.0"
138  addr = "1c.1"
139  port = "2"
140  chassis = "2"
141
142[device "pcie.3"]
143  driver = "pcie-root-port"
144  bus = "pcie.0"
145  addr = "1c.2"
146  port = "3"
147  chassis = "3"
148
149[device "pcie.4"]
150  driver = "pcie-root-port"
151  bus = "pcie.0"
152  addr = "1c.3"
153  port = "4"
154  chassis = "4"
155
156[device "pcie.5"]
157  driver = "pcie-root-port"
158  bus = "pcie.0"
159  addr = "1c.4"
160  port = "5"
161  chassis = "5"
162
163[device "pcie.6"]
164  driver = "pcie-root-port"
165  bus = "pcie.0"
166  addr = "1c.5"
167  port = "6"
168  chassis = "6"
169
170[device "pcie.7"]
171  driver = "pcie-root-port"
172  bus = "pcie.0"
173  addr = "1c.6"
174  port = "7"
175  chassis = "7"
176
177[device "pcie.8"]
178  driver = "pcie-root-port"
179  bus = "pcie.0"
180  addr = "1c.7"
181  port = "8"
182  chassis = "8"
183
184
185# SCSI storage controller (and storage)
186# =========================================================
187#
188# We use virtio-scsi here so that we can (hot)plug a large
189# number of disks without running into issues; a SCSI disk,
190# backed by a qcow2 disk image on the host's filesystem, is
191# attached to it.
192#
193# We also create an optical disk, mostly for installation
194# purposes: once the guest OS has been successfully
195# installed, the guest will no longer boot from optical
196# media. If you don't want, or no longer want, to have an
197# optical disk in the guest you can safely comment out
198# all relevant sections below.
199
200[device "scsi"]
201  driver = "virtio-scsi-pci"
202  bus = "pcie.1"
203  addr = "00.0"
204
205[device "scsi-disk"]
206  driver = "scsi-hd"
207  bus = "scsi.0"
208  drive = "disk"
209  bootindex = "1"
210
211[drive "disk"]
212  file = "guest.qcow2"                          # CHANGE ME
213  format = "qcow2"
214  if = "none"
215
216[device "scsi-optical-disk"]
217  driver = "scsi-cd"
218  bus = "scsi.0"
219  drive = "optical-disk"
220  bootindex = "2"
221
222[drive "optical-disk"]
223  file = "install.iso"                          # CHANGE ME
224  format = "raw"
225  if = "none"
226
227
228# Ethernet controller
229# =========================================================
230#
231# We use virtio-net for improved performance over emulated
232# hardware; on the host side, we take advantage of user
233# networking so that the QEMU process doesn't require any
234# additional privileges.
235
236[netdev "hostnet"]
237  type = "user"
238
239[device "net"]
240  driver = "virtio-net-pci"
241  netdev = "hostnet"
242  bus = "pcie.2"
243  addr = "00.0"
244