1COLO-proxy 2---------- 3Copyright (c) 2016 Intel Corporation 4Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD. 5Copyright (c) 2016 Fujitsu, Corp. 6 7This work is licensed under the terms of the GNU GPL, version 2 or later. 8See the COPYING file in the top-level directory. 9 10This document gives an overview of COLO proxy's design. 11 12== Background == 13COLO-proxy is a part of COLO project. It is used 14to compare the network package to help COLO decide 15whether to do checkpoint. With COLO-proxy's help, 16COLO greatly improves the performance. 17 18The filter-redirector, filter-mirror, colo-compare 19and filter-rewriter compose the COLO-proxy. 20 21== Architecture == 22 23COLO-Proxy is based on qemu netfilter and it's a plugin for qemu netfilter 24(except colo-compare). It keep Secondary VM connect normally to 25client and compare packets sent by PVM with sent by SVM. 26If the packet difference, notify COLO-frame to do checkpoint and send 27all primary packet has queued. Otherwise just send the queued primary 28packet and drop the queued secondary packet. 29 30Below is a COLO proxy ascii figure: 31 32 Primary qemu Secondary qemu 33+--------------------------------------------------------------+ +----------------------------------------------------------------+ 34| +----------------------------------------------------------+ | | +-----------------------------------------------------------+ | 35| | | | | | | | 36| | guest | | | | guest | | 37| | | | | | | | 38| +-------^--------------------------+-----------------------+ | | +---------------------+--------+----------------------------+ | 39| | | | | ^ | | 40| | | | | | | | 41| | +------------------------------------------------------+ | | | | 42|netfilter| | | | | | netfilter | | | 43| +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | 44| | | | | | out | | | | | | filter excute order | | 45| | | | +-----------------------------+ | | | | | | +-------------------> | | 46| | | | | | | | | | | | | | TCP | | 47| | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | 48| | | | | | | | |in | |in | | | | | | | | | | | | | 49| | | filter | | filter | | filter +------> colo <------+ +--------> filter +--> adjust | adjust +--> filter | | | 50| | | mirror | |redirector| |redirector| | | compare | | | | | | redirector | | ack | seq | | redirector | | | 51| | | | | | | | | | | | | | | | | | | | | | | | 52| | +----^-----+ +----+-----+ +----------+ | +---------+ | | | | +------------+ +--------+--------------+ +---+--------+ | | 53| | | tx | rx rx | | | | | tx all | rx | | 54| | | | | | | | +-----------------------------------------------------------+ | 55| | | +--------------+ | | | | | | 56| | | filter excute order | | | | | | | 57| | | +----------------> | | | +--------------------------------------------------------+ | 58| +-----------------------------------------+ | | | 59| | | | | | 60+--------------------------------------------------------------+ +----------------------------------------------------------------+ 61 |guest receive | guest send 62 | | 63+--------+----------------------------v------------------------+ 64| | NOTE: filter direction is rx/tx/all 65| tap | rx:receive packets sent to the netdev 66| | tx:receive packets sent by the netdev 67+--------------------------------------------------------------+ 68 691.Guest receive packet route: 70 71Primary: 72 73Tap --> Mirror Client Filter 74Mirror client will send packet to guest,at the 75same time, copy and forward packet to secondary 76mirror server. 77 78Secondary: 79 80Mirror Server Filter --> TCP Rewriter 81If receive packet is TCP packet,we will adjust ack 82and update TCP checksum, then send to secondary 83guest. Otherwise directly send to guest. 84 852.Guest send packet route: 86 87Primary: 88 89Guest --> Redirect Server Filter 90Redirect server filter receive primary guest packet 91but do nothing, just pass to next filter. 92 93Redirect Server Filter --> COLO-Compare 94COLO-compare receive primary guest packet then 95waiting scondary redirect packet to compare it. 96If packet same,send queued primary packet and clear 97queued secondary packet, Otherwise send primary packet 98and do checkpoint. 99 100COLO-Compare --> Another Redirector Filter 101The redirector get packet from colo-compare by use 102chardev socket. 103 104Redirector Filter --> Tap 105Send the packet. 106 107Secondary: 108 109Guest --> TCP Rewriter Filter 110If the packet is TCP packet,we will adjust seq 111and update TCP checksum. Then send it to 112redirect client filter. Otherwise directly send to 113redirect client filter. 114 115Redirect Client Filter --> Redirect Server Filter 116Forward packet to primary. 117 118== Components introduction == 119 120Filter-mirror is a netfilter plugin. 121It gives qemu the ability to mirror 122packets to a chardev. 123 124Filter-redirector is a netfilter plugin. 125It gives qemu the ability to redirect net packet. 126Redirector can redirect filter's net packet to outdev, 127and redirect indev's packet to filter. 128 129 filter 130 + 131 redirector | 132 +--------------+ 133 | | | 134 | | | 135 | | | 136 indev +---------+ +----------> outdev 137 | | | 138 | | | 139 | | | 140 +--------------+ 141 | 142 v 143 filter 144 145COLO-compare, we do packet comparing job. 146Packets coming from the primary char indev will be sent to outdev. 147Packets coming from the secondary char dev will be dropped after comparing. 148COLO-compare needs two input chardevs and one output chardev: 149primary_in=chardev1-id (source: primary send packet) 150secondary_in=chardev2-id (source: secondary send packet) 151outdev=chardev3-id 152 153Filter-rewriter will rewrite some of secondary packet to make 154secondary guest's tcp connection established successfully. 155In this module we will rewrite tcp packet's ack to the secondary 156from primary,and rewrite tcp packet's seq to the primary from 157secondary. 158 159== Usage == 160 161Here is an example using demonstration IP and port addresses to more 162clearly describe the usage. 163 164Primary(ip:3.3.3.3): 165-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown 166-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 167-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait 168-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait 169-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait 170-chardev socket,id=compare0-0,host=3.3.3.3,port=9001 171-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait 172-chardev socket,id=compare_out0,host=3.3.3.3,port=9005 173-object iothread,id=iothread1 174-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 175-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out 176-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 177-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,iothread=iothread1 178 179Secondary(ip:3.3.3.8): 180-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown 181-device e1000,netdev=hn0,mac=52:a4:00:12:78:66 182-chardev socket,id=red0,host=3.3.3.3,port=9003 183-chardev socket,id=red1,host=3.3.3.3,port=9004 184-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 185-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 186-object filter-rewriter,id=f3,netdev=hn0,queue=all 187 188If you want to use virtio-net-pci or other driver with vnet_header: 189 190Primary(ip:3.3.3.3): 191-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown 192-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 193-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait 194-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait 195-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait 196-chardev socket,id=compare0-0,host=3.3.3.3,port=9001 197-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait 198-chardev socket,id=compare_out0,host=3.3.3.3,port=9005 199-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support 200-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out,vnet_hdr_support 201-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0,vnet_hdr_support 202-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support 203 204Secondary(ip:3.3.3.8): 205-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown 206-device e1000,netdev=hn0,mac=52:a4:00:12:78:66 207-chardev socket,id=red0,host=3.3.3.3,port=9003 208-chardev socket,id=red1,host=3.3.3.3,port=9004 209-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0,vnet_hdr_support 210-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1,vnet_hdr_support 211-object filter-rewriter,id=f3,netdev=hn0,queue=all,vnet_hdr_support 212 213Note: 214 a.COLO-proxy must work with COLO-frame and Block-replication. 215 b.Primary COLO must be started firstly, because COLO-proxy needs 216 chardev socket server running before secondary started. 217 c.Filter-rewriter only rewrite tcp packet. 218