1 /* 2 * Block driver for the QCOW version 2 format 3 * 4 * Copyright (c) 2004-2006 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include <zlib.h> 27 28 #include "qapi/error.h" 29 #include "qcow2.h" 30 #include "qemu/bswap.h" 31 #include "trace.h" 32 33 int qcow2_shrink_l1_table(BlockDriverState *bs, uint64_t exact_size) 34 { 35 BDRVQcow2State *s = bs->opaque; 36 int new_l1_size, i, ret; 37 38 if (exact_size >= s->l1_size) { 39 return 0; 40 } 41 42 new_l1_size = exact_size; 43 44 #ifdef DEBUG_ALLOC2 45 fprintf(stderr, "shrink l1_table from %d to %d\n", s->l1_size, new_l1_size); 46 #endif 47 48 BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_WRITE_TABLE); 49 ret = bdrv_pwrite_zeroes(bs->file, s->l1_table_offset + 50 new_l1_size * sizeof(uint64_t), 51 (s->l1_size - new_l1_size) * sizeof(uint64_t), 0); 52 if (ret < 0) { 53 goto fail; 54 } 55 56 ret = bdrv_flush(bs->file->bs); 57 if (ret < 0) { 58 goto fail; 59 } 60 61 BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_FREE_L2_CLUSTERS); 62 for (i = s->l1_size - 1; i > new_l1_size - 1; i--) { 63 if ((s->l1_table[i] & L1E_OFFSET_MASK) == 0) { 64 continue; 65 } 66 qcow2_free_clusters(bs, s->l1_table[i] & L1E_OFFSET_MASK, 67 s->cluster_size, QCOW2_DISCARD_ALWAYS); 68 s->l1_table[i] = 0; 69 } 70 return 0; 71 72 fail: 73 /* 74 * If the write in the l1_table failed the image may contain a partially 75 * overwritten l1_table. In this case it would be better to clear the 76 * l1_table in memory to avoid possible image corruption. 77 */ 78 memset(s->l1_table + new_l1_size, 0, 79 (s->l1_size - new_l1_size) * sizeof(uint64_t)); 80 return ret; 81 } 82 83 int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size, 84 bool exact_size) 85 { 86 BDRVQcow2State *s = bs->opaque; 87 int new_l1_size2, ret, i; 88 uint64_t *new_l1_table; 89 int64_t old_l1_table_offset, old_l1_size; 90 int64_t new_l1_table_offset, new_l1_size; 91 uint8_t data[12]; 92 93 if (min_size <= s->l1_size) 94 return 0; 95 96 /* Do a sanity check on min_size before trying to calculate new_l1_size 97 * (this prevents overflows during the while loop for the calculation of 98 * new_l1_size) */ 99 if (min_size > INT_MAX / sizeof(uint64_t)) { 100 return -EFBIG; 101 } 102 103 if (exact_size) { 104 new_l1_size = min_size; 105 } else { 106 /* Bump size up to reduce the number of times we have to grow */ 107 new_l1_size = s->l1_size; 108 if (new_l1_size == 0) { 109 new_l1_size = 1; 110 } 111 while (min_size > new_l1_size) { 112 new_l1_size = DIV_ROUND_UP(new_l1_size * 3, 2); 113 } 114 } 115 116 QEMU_BUILD_BUG_ON(QCOW_MAX_L1_SIZE > INT_MAX); 117 if (new_l1_size > QCOW_MAX_L1_SIZE / sizeof(uint64_t)) { 118 return -EFBIG; 119 } 120 121 #ifdef DEBUG_ALLOC2 122 fprintf(stderr, "grow l1_table from %d to %" PRId64 "\n", 123 s->l1_size, new_l1_size); 124 #endif 125 126 new_l1_size2 = sizeof(uint64_t) * new_l1_size; 127 new_l1_table = qemu_try_blockalign(bs->file->bs, new_l1_size2); 128 if (new_l1_table == NULL) { 129 return -ENOMEM; 130 } 131 memset(new_l1_table, 0, new_l1_size2); 132 133 if (s->l1_size) { 134 memcpy(new_l1_table, s->l1_table, s->l1_size * sizeof(uint64_t)); 135 } 136 137 /* write new table (align to cluster) */ 138 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ALLOC_TABLE); 139 new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2); 140 if (new_l1_table_offset < 0) { 141 qemu_vfree(new_l1_table); 142 return new_l1_table_offset; 143 } 144 145 ret = qcow2_cache_flush(bs, s->refcount_block_cache); 146 if (ret < 0) { 147 goto fail; 148 } 149 150 /* the L1 position has not yet been updated, so these clusters must 151 * indeed be completely free */ 152 ret = qcow2_pre_write_overlap_check(bs, 0, new_l1_table_offset, 153 new_l1_size2, false); 154 if (ret < 0) { 155 goto fail; 156 } 157 158 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_WRITE_TABLE); 159 for(i = 0; i < s->l1_size; i++) 160 new_l1_table[i] = cpu_to_be64(new_l1_table[i]); 161 ret = bdrv_pwrite_sync(bs->file, new_l1_table_offset, 162 new_l1_table, new_l1_size2); 163 if (ret < 0) 164 goto fail; 165 for(i = 0; i < s->l1_size; i++) 166 new_l1_table[i] = be64_to_cpu(new_l1_table[i]); 167 168 /* set new table */ 169 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ACTIVATE_TABLE); 170 stl_be_p(data, new_l1_size); 171 stq_be_p(data + 4, new_l1_table_offset); 172 ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_size), 173 data, sizeof(data)); 174 if (ret < 0) { 175 goto fail; 176 } 177 qemu_vfree(s->l1_table); 178 old_l1_table_offset = s->l1_table_offset; 179 s->l1_table_offset = new_l1_table_offset; 180 s->l1_table = new_l1_table; 181 old_l1_size = s->l1_size; 182 s->l1_size = new_l1_size; 183 qcow2_free_clusters(bs, old_l1_table_offset, old_l1_size * sizeof(uint64_t), 184 QCOW2_DISCARD_OTHER); 185 return 0; 186 fail: 187 qemu_vfree(new_l1_table); 188 qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2, 189 QCOW2_DISCARD_OTHER); 190 return ret; 191 } 192 193 /* 194 * l2_load 195 * 196 * @bs: The BlockDriverState 197 * @offset: A guest offset, used to calculate what slice of the L2 198 * table to load. 199 * @l2_offset: Offset to the L2 table in the image file. 200 * @l2_slice: Location to store the pointer to the L2 slice. 201 * 202 * Loads a L2 slice into memory (L2 slices are the parts of L2 tables 203 * that are loaded by the qcow2 cache). If the slice is in the cache, 204 * the cache is used; otherwise the L2 slice is loaded from the image 205 * file. 206 */ 207 static int l2_load(BlockDriverState *bs, uint64_t offset, 208 uint64_t l2_offset, uint64_t **l2_slice) 209 { 210 BDRVQcow2State *s = bs->opaque; 211 int start_of_slice = l2_entry_size(s) * 212 (offset_to_l2_index(s, offset) - offset_to_l2_slice_index(s, offset)); 213 214 return qcow2_cache_get(bs, s->l2_table_cache, l2_offset + start_of_slice, 215 (void **)l2_slice); 216 } 217 218 /* 219 * Writes an L1 entry to disk (note that depending on the alignment 220 * requirements this function may write more that just one entry in 221 * order to prevent bdrv_pwrite from performing a read-modify-write) 222 */ 223 int qcow2_write_l1_entry(BlockDriverState *bs, int l1_index) 224 { 225 BDRVQcow2State *s = bs->opaque; 226 int l1_start_index; 227 int i, ret; 228 int bufsize = MAX(sizeof(uint64_t), 229 MIN(bs->file->bs->bl.request_alignment, s->cluster_size)); 230 int nentries = bufsize / sizeof(uint64_t); 231 g_autofree uint64_t *buf = g_try_new0(uint64_t, nentries); 232 233 if (buf == NULL) { 234 return -ENOMEM; 235 } 236 237 l1_start_index = QEMU_ALIGN_DOWN(l1_index, nentries); 238 for (i = 0; i < MIN(nentries, s->l1_size - l1_start_index); i++) { 239 buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]); 240 } 241 242 ret = qcow2_pre_write_overlap_check(bs, QCOW2_OL_ACTIVE_L1, 243 s->l1_table_offset + 8 * l1_start_index, bufsize, false); 244 if (ret < 0) { 245 return ret; 246 } 247 248 BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE); 249 ret = bdrv_pwrite_sync(bs->file, 250 s->l1_table_offset + 8 * l1_start_index, 251 buf, bufsize); 252 if (ret < 0) { 253 return ret; 254 } 255 256 return 0; 257 } 258 259 /* 260 * l2_allocate 261 * 262 * Allocate a new l2 entry in the file. If l1_index points to an already 263 * used entry in the L2 table (i.e. we are doing a copy on write for the L2 264 * table) copy the contents of the old L2 table into the newly allocated one. 265 * Otherwise the new table is initialized with zeros. 266 * 267 */ 268 269 static int l2_allocate(BlockDriverState *bs, int l1_index) 270 { 271 BDRVQcow2State *s = bs->opaque; 272 uint64_t old_l2_offset; 273 uint64_t *l2_slice = NULL; 274 unsigned slice, slice_size2, n_slices; 275 int64_t l2_offset; 276 int ret; 277 278 old_l2_offset = s->l1_table[l1_index]; 279 280 trace_qcow2_l2_allocate(bs, l1_index); 281 282 /* allocate a new l2 entry */ 283 284 l2_offset = qcow2_alloc_clusters(bs, s->l2_size * l2_entry_size(s)); 285 if (l2_offset < 0) { 286 ret = l2_offset; 287 goto fail; 288 } 289 290 /* The offset must fit in the offset field of the L1 table entry */ 291 assert((l2_offset & L1E_OFFSET_MASK) == l2_offset); 292 293 /* If we're allocating the table at offset 0 then something is wrong */ 294 if (l2_offset == 0) { 295 qcow2_signal_corruption(bs, true, -1, -1, "Preventing invalid " 296 "allocation of L2 table at offset 0"); 297 ret = -EIO; 298 goto fail; 299 } 300 301 ret = qcow2_cache_flush(bs, s->refcount_block_cache); 302 if (ret < 0) { 303 goto fail; 304 } 305 306 /* allocate a new entry in the l2 cache */ 307 308 slice_size2 = s->l2_slice_size * l2_entry_size(s); 309 n_slices = s->cluster_size / slice_size2; 310 311 trace_qcow2_l2_allocate_get_empty(bs, l1_index); 312 for (slice = 0; slice < n_slices; slice++) { 313 ret = qcow2_cache_get_empty(bs, s->l2_table_cache, 314 l2_offset + slice * slice_size2, 315 (void **) &l2_slice); 316 if (ret < 0) { 317 goto fail; 318 } 319 320 if ((old_l2_offset & L1E_OFFSET_MASK) == 0) { 321 /* if there was no old l2 table, clear the new slice */ 322 memset(l2_slice, 0, slice_size2); 323 } else { 324 uint64_t *old_slice; 325 uint64_t old_l2_slice_offset = 326 (old_l2_offset & L1E_OFFSET_MASK) + slice * slice_size2; 327 328 /* if there was an old l2 table, read a slice from the disk */ 329 BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ); 330 ret = qcow2_cache_get(bs, s->l2_table_cache, old_l2_slice_offset, 331 (void **) &old_slice); 332 if (ret < 0) { 333 goto fail; 334 } 335 336 memcpy(l2_slice, old_slice, slice_size2); 337 338 qcow2_cache_put(s->l2_table_cache, (void **) &old_slice); 339 } 340 341 /* write the l2 slice to the file */ 342 BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE); 343 344 trace_qcow2_l2_allocate_write_l2(bs, l1_index); 345 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 346 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 347 } 348 349 ret = qcow2_cache_flush(bs, s->l2_table_cache); 350 if (ret < 0) { 351 goto fail; 352 } 353 354 /* update the L1 entry */ 355 trace_qcow2_l2_allocate_write_l1(bs, l1_index); 356 s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED; 357 ret = qcow2_write_l1_entry(bs, l1_index); 358 if (ret < 0) { 359 goto fail; 360 } 361 362 trace_qcow2_l2_allocate_done(bs, l1_index, 0); 363 return 0; 364 365 fail: 366 trace_qcow2_l2_allocate_done(bs, l1_index, ret); 367 if (l2_slice != NULL) { 368 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 369 } 370 s->l1_table[l1_index] = old_l2_offset; 371 if (l2_offset > 0) { 372 qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s), 373 QCOW2_DISCARD_ALWAYS); 374 } 375 return ret; 376 } 377 378 /* 379 * For a given L2 entry, count the number of contiguous subclusters of 380 * the same type starting from @sc_from. Compressed clusters are 381 * treated as if they were divided into subclusters of size 382 * s->subcluster_size. 383 * 384 * Return the number of contiguous subclusters and set @type to the 385 * subcluster type. 386 * 387 * If the L2 entry is invalid return -errno and set @type to 388 * QCOW2_SUBCLUSTER_INVALID. 389 */ 390 static int qcow2_get_subcluster_range_type(BlockDriverState *bs, 391 uint64_t l2_entry, 392 uint64_t l2_bitmap, 393 unsigned sc_from, 394 QCow2SubclusterType *type) 395 { 396 BDRVQcow2State *s = bs->opaque; 397 uint32_t val; 398 399 *type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_from); 400 401 if (*type == QCOW2_SUBCLUSTER_INVALID) { 402 return -EINVAL; 403 } else if (!has_subclusters(s) || *type == QCOW2_SUBCLUSTER_COMPRESSED) { 404 return s->subclusters_per_cluster - sc_from; 405 } 406 407 switch (*type) { 408 case QCOW2_SUBCLUSTER_NORMAL: 409 val = l2_bitmap | QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from); 410 return cto32(val) - sc_from; 411 412 case QCOW2_SUBCLUSTER_ZERO_PLAIN: 413 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 414 val = (l2_bitmap | QCOW_OFLAG_SUB_ZERO_RANGE(0, sc_from)) >> 32; 415 return cto32(val) - sc_from; 416 417 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: 418 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: 419 val = ((l2_bitmap >> 32) | l2_bitmap) 420 & ~QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from); 421 return ctz32(val) - sc_from; 422 423 default: 424 g_assert_not_reached(); 425 } 426 } 427 428 /* 429 * Return the number of contiguous subclusters of the exact same type 430 * in a given L2 slice, starting from cluster @l2_index, subcluster 431 * @sc_index. Allocated subclusters are required to be contiguous in 432 * the image file. 433 * At most @nb_clusters are checked (note that this means clusters, 434 * not subclusters). 435 * Compressed clusters are always processed one by one but for the 436 * purpose of this count they are treated as if they were divided into 437 * subclusters of size s->subcluster_size. 438 * On failure return -errno and update @l2_index to point to the 439 * invalid entry. 440 */ 441 static int count_contiguous_subclusters(BlockDriverState *bs, int nb_clusters, 442 unsigned sc_index, uint64_t *l2_slice, 443 unsigned *l2_index) 444 { 445 BDRVQcow2State *s = bs->opaque; 446 int i, count = 0; 447 bool check_offset = false; 448 uint64_t expected_offset = 0; 449 QCow2SubclusterType expected_type = QCOW2_SUBCLUSTER_NORMAL, type; 450 451 assert(*l2_index + nb_clusters <= s->l2_slice_size); 452 453 for (i = 0; i < nb_clusters; i++) { 454 unsigned first_sc = (i == 0) ? sc_index : 0; 455 uint64_t l2_entry = get_l2_entry(s, l2_slice, *l2_index + i); 456 uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, *l2_index + i); 457 int ret = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap, 458 first_sc, &type); 459 if (ret < 0) { 460 *l2_index += i; /* Point to the invalid entry */ 461 return -EIO; 462 } 463 if (i == 0) { 464 if (type == QCOW2_SUBCLUSTER_COMPRESSED) { 465 /* Compressed clusters are always processed one by one */ 466 return ret; 467 } 468 expected_type = type; 469 expected_offset = l2_entry & L2E_OFFSET_MASK; 470 check_offset = (type == QCOW2_SUBCLUSTER_NORMAL || 471 type == QCOW2_SUBCLUSTER_ZERO_ALLOC || 472 type == QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC); 473 } else if (type != expected_type) { 474 break; 475 } else if (check_offset) { 476 expected_offset += s->cluster_size; 477 if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) { 478 break; 479 } 480 } 481 count += ret; 482 /* Stop if there are type changes before the end of the cluster */ 483 if (first_sc + ret < s->subclusters_per_cluster) { 484 break; 485 } 486 } 487 488 return count; 489 } 490 491 static int coroutine_fn do_perform_cow_read(BlockDriverState *bs, 492 uint64_t src_cluster_offset, 493 unsigned offset_in_cluster, 494 QEMUIOVector *qiov) 495 { 496 int ret; 497 498 if (qiov->size == 0) { 499 return 0; 500 } 501 502 BLKDBG_EVENT(bs->file, BLKDBG_COW_READ); 503 504 if (!bs->drv) { 505 return -ENOMEDIUM; 506 } 507 508 /* Call .bdrv_co_readv() directly instead of using the public block-layer 509 * interface. This avoids double I/O throttling and request tracking, 510 * which can lead to deadlock when block layer copy-on-read is enabled. 511 */ 512 ret = bs->drv->bdrv_co_preadv_part(bs, 513 src_cluster_offset + offset_in_cluster, 514 qiov->size, qiov, 0, 0); 515 if (ret < 0) { 516 return ret; 517 } 518 519 return 0; 520 } 521 522 static int coroutine_fn do_perform_cow_write(BlockDriverState *bs, 523 uint64_t cluster_offset, 524 unsigned offset_in_cluster, 525 QEMUIOVector *qiov) 526 { 527 BDRVQcow2State *s = bs->opaque; 528 int ret; 529 530 if (qiov->size == 0) { 531 return 0; 532 } 533 534 ret = qcow2_pre_write_overlap_check(bs, 0, 535 cluster_offset + offset_in_cluster, qiov->size, true); 536 if (ret < 0) { 537 return ret; 538 } 539 540 BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE); 541 ret = bdrv_co_pwritev(s->data_file, cluster_offset + offset_in_cluster, 542 qiov->size, qiov, 0); 543 if (ret < 0) { 544 return ret; 545 } 546 547 return 0; 548 } 549 550 551 /* 552 * get_host_offset 553 * 554 * For a given offset of the virtual disk find the equivalent host 555 * offset in the qcow2 file and store it in *host_offset. Neither 556 * offset needs to be aligned to a cluster boundary. 557 * 558 * If the cluster is unallocated then *host_offset will be 0. 559 * If the cluster is compressed then *host_offset will contain the 560 * complete compressed cluster descriptor. 561 * 562 * On entry, *bytes is the maximum number of contiguous bytes starting at 563 * offset that we are interested in. 564 * 565 * On exit, *bytes is the number of bytes starting at offset that have the same 566 * subcluster type and (if applicable) are stored contiguously in the image 567 * file. The subcluster type is stored in *subcluster_type. 568 * Compressed clusters are always processed one by one. 569 * 570 * Returns 0 on success, -errno in error cases. 571 */ 572 int qcow2_get_host_offset(BlockDriverState *bs, uint64_t offset, 573 unsigned int *bytes, uint64_t *host_offset, 574 QCow2SubclusterType *subcluster_type) 575 { 576 BDRVQcow2State *s = bs->opaque; 577 unsigned int l2_index, sc_index; 578 uint64_t l1_index, l2_offset, *l2_slice, l2_entry, l2_bitmap; 579 int sc; 580 unsigned int offset_in_cluster; 581 uint64_t bytes_available, bytes_needed, nb_clusters; 582 QCow2SubclusterType type; 583 int ret; 584 585 offset_in_cluster = offset_into_cluster(s, offset); 586 bytes_needed = (uint64_t) *bytes + offset_in_cluster; 587 588 /* compute how many bytes there are between the start of the cluster 589 * containing offset and the end of the l2 slice that contains 590 * the entry pointing to it */ 591 bytes_available = 592 ((uint64_t) (s->l2_slice_size - offset_to_l2_slice_index(s, offset))) 593 << s->cluster_bits; 594 595 if (bytes_needed > bytes_available) { 596 bytes_needed = bytes_available; 597 } 598 599 *host_offset = 0; 600 601 /* seek to the l2 offset in the l1 table */ 602 603 l1_index = offset_to_l1_index(s, offset); 604 if (l1_index >= s->l1_size) { 605 type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN; 606 goto out; 607 } 608 609 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; 610 if (!l2_offset) { 611 type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN; 612 goto out; 613 } 614 615 if (offset_into_cluster(s, l2_offset)) { 616 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64 617 " unaligned (L1 index: %#" PRIx64 ")", 618 l2_offset, l1_index); 619 return -EIO; 620 } 621 622 /* load the l2 slice in memory */ 623 624 ret = l2_load(bs, offset, l2_offset, &l2_slice); 625 if (ret < 0) { 626 return ret; 627 } 628 629 /* find the cluster offset for the given disk offset */ 630 631 l2_index = offset_to_l2_slice_index(s, offset); 632 sc_index = offset_to_sc_index(s, offset); 633 l2_entry = get_l2_entry(s, l2_slice, l2_index); 634 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); 635 636 nb_clusters = size_to_clusters(s, bytes_needed); 637 /* bytes_needed <= *bytes + offset_in_cluster, both of which are unsigned 638 * integers; the minimum cluster size is 512, so this assertion is always 639 * true */ 640 assert(nb_clusters <= INT_MAX); 641 642 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); 643 if (s->qcow_version < 3 && (type == QCOW2_SUBCLUSTER_ZERO_PLAIN || 644 type == QCOW2_SUBCLUSTER_ZERO_ALLOC)) { 645 qcow2_signal_corruption(bs, true, -1, -1, "Zero cluster entry found" 646 " in pre-v3 image (L2 offset: %#" PRIx64 647 ", L2 index: %#x)", l2_offset, l2_index); 648 ret = -EIO; 649 goto fail; 650 } 651 switch (type) { 652 case QCOW2_SUBCLUSTER_INVALID: 653 break; /* This is handled by count_contiguous_subclusters() below */ 654 case QCOW2_SUBCLUSTER_COMPRESSED: 655 if (has_data_file(bs)) { 656 qcow2_signal_corruption(bs, true, -1, -1, "Compressed cluster " 657 "entry found in image with external data " 658 "file (L2 offset: %#" PRIx64 ", L2 index: " 659 "%#x)", l2_offset, l2_index); 660 ret = -EIO; 661 goto fail; 662 } 663 *host_offset = l2_entry & L2E_COMPRESSED_OFFSET_SIZE_MASK; 664 break; 665 case QCOW2_SUBCLUSTER_ZERO_PLAIN: 666 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: 667 break; 668 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 669 case QCOW2_SUBCLUSTER_NORMAL: 670 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: { 671 uint64_t host_cluster_offset = l2_entry & L2E_OFFSET_MASK; 672 *host_offset = host_cluster_offset + offset_in_cluster; 673 if (offset_into_cluster(s, host_cluster_offset)) { 674 qcow2_signal_corruption(bs, true, -1, -1, 675 "Cluster allocation offset %#" 676 PRIx64 " unaligned (L2 offset: %#" PRIx64 677 ", L2 index: %#x)", host_cluster_offset, 678 l2_offset, l2_index); 679 ret = -EIO; 680 goto fail; 681 } 682 if (has_data_file(bs) && *host_offset != offset) { 683 qcow2_signal_corruption(bs, true, -1, -1, 684 "External data file host cluster offset %#" 685 PRIx64 " does not match guest cluster " 686 "offset: %#" PRIx64 687 ", L2 index: %#x)", host_cluster_offset, 688 offset - offset_in_cluster, l2_index); 689 ret = -EIO; 690 goto fail; 691 } 692 break; 693 } 694 default: 695 abort(); 696 } 697 698 sc = count_contiguous_subclusters(bs, nb_clusters, sc_index, 699 l2_slice, &l2_index); 700 if (sc < 0) { 701 qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster entry found " 702 " (L2 offset: %#" PRIx64 ", L2 index: %#x)", 703 l2_offset, l2_index); 704 ret = -EIO; 705 goto fail; 706 } 707 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 708 709 bytes_available = ((int64_t)sc + sc_index) << s->subcluster_bits; 710 711 out: 712 if (bytes_available > bytes_needed) { 713 bytes_available = bytes_needed; 714 } 715 716 /* bytes_available <= bytes_needed <= *bytes + offset_in_cluster; 717 * subtracting offset_in_cluster will therefore definitely yield something 718 * not exceeding UINT_MAX */ 719 assert(bytes_available - offset_in_cluster <= UINT_MAX); 720 *bytes = bytes_available - offset_in_cluster; 721 722 *subcluster_type = type; 723 724 return 0; 725 726 fail: 727 qcow2_cache_put(s->l2_table_cache, (void **)&l2_slice); 728 return ret; 729 } 730 731 /* 732 * get_cluster_table 733 * 734 * for a given disk offset, load (and allocate if needed) 735 * the appropriate slice of its l2 table. 736 * 737 * the cluster index in the l2 slice is given to the caller. 738 * 739 * Returns 0 on success, -errno in failure case 740 */ 741 static int get_cluster_table(BlockDriverState *bs, uint64_t offset, 742 uint64_t **new_l2_slice, 743 int *new_l2_index) 744 { 745 BDRVQcow2State *s = bs->opaque; 746 unsigned int l2_index; 747 uint64_t l1_index, l2_offset; 748 uint64_t *l2_slice = NULL; 749 int ret; 750 751 /* seek to the l2 offset in the l1 table */ 752 753 l1_index = offset_to_l1_index(s, offset); 754 if (l1_index >= s->l1_size) { 755 ret = qcow2_grow_l1_table(bs, l1_index + 1, false); 756 if (ret < 0) { 757 return ret; 758 } 759 } 760 761 assert(l1_index < s->l1_size); 762 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; 763 if (offset_into_cluster(s, l2_offset)) { 764 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64 765 " unaligned (L1 index: %#" PRIx64 ")", 766 l2_offset, l1_index); 767 return -EIO; 768 } 769 770 if (!(s->l1_table[l1_index] & QCOW_OFLAG_COPIED)) { 771 /* First allocate a new L2 table (and do COW if needed) */ 772 ret = l2_allocate(bs, l1_index); 773 if (ret < 0) { 774 return ret; 775 } 776 777 /* Then decrease the refcount of the old table */ 778 if (l2_offset) { 779 qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s), 780 QCOW2_DISCARD_OTHER); 781 } 782 783 /* Get the offset of the newly-allocated l2 table */ 784 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; 785 assert(offset_into_cluster(s, l2_offset) == 0); 786 } 787 788 /* load the l2 slice in memory */ 789 ret = l2_load(bs, offset, l2_offset, &l2_slice); 790 if (ret < 0) { 791 return ret; 792 } 793 794 /* find the cluster offset for the given disk offset */ 795 796 l2_index = offset_to_l2_slice_index(s, offset); 797 798 *new_l2_slice = l2_slice; 799 *new_l2_index = l2_index; 800 801 return 0; 802 } 803 804 /* 805 * alloc_compressed_cluster_offset 806 * 807 * For a given offset on the virtual disk, allocate a new compressed cluster 808 * and put the host offset of the cluster into *host_offset. If a cluster is 809 * already allocated at the offset, return an error. 810 * 811 * Return 0 on success and -errno in error cases 812 */ 813 int qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs, 814 uint64_t offset, 815 int compressed_size, 816 uint64_t *host_offset) 817 { 818 BDRVQcow2State *s = bs->opaque; 819 int l2_index, ret; 820 uint64_t *l2_slice; 821 int64_t cluster_offset; 822 int nb_csectors; 823 824 if (has_data_file(bs)) { 825 return 0; 826 } 827 828 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); 829 if (ret < 0) { 830 return ret; 831 } 832 833 /* Compression can't overwrite anything. Fail if the cluster was already 834 * allocated. */ 835 cluster_offset = get_l2_entry(s, l2_slice, l2_index); 836 if (cluster_offset & L2E_OFFSET_MASK) { 837 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 838 return -EIO; 839 } 840 841 cluster_offset = qcow2_alloc_bytes(bs, compressed_size); 842 if (cluster_offset < 0) { 843 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 844 return cluster_offset; 845 } 846 847 nb_csectors = 848 (cluster_offset + compressed_size - 1) / QCOW2_COMPRESSED_SECTOR_SIZE - 849 (cluster_offset / QCOW2_COMPRESSED_SECTOR_SIZE); 850 851 /* The offset and size must fit in their fields of the L2 table entry */ 852 assert((cluster_offset & s->cluster_offset_mask) == cluster_offset); 853 assert((nb_csectors & s->csize_mask) == nb_csectors); 854 855 cluster_offset |= QCOW_OFLAG_COMPRESSED | 856 ((uint64_t)nb_csectors << s->csize_shift); 857 858 /* update L2 table */ 859 860 /* compressed clusters never have the copied flag */ 861 862 BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED); 863 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 864 set_l2_entry(s, l2_slice, l2_index, cluster_offset); 865 if (has_subclusters(s)) { 866 set_l2_bitmap(s, l2_slice, l2_index, 0); 867 } 868 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 869 870 *host_offset = cluster_offset & s->cluster_offset_mask; 871 return 0; 872 } 873 874 static int perform_cow(BlockDriverState *bs, QCowL2Meta *m) 875 { 876 BDRVQcow2State *s = bs->opaque; 877 Qcow2COWRegion *start = &m->cow_start; 878 Qcow2COWRegion *end = &m->cow_end; 879 unsigned buffer_size; 880 unsigned data_bytes = end->offset - (start->offset + start->nb_bytes); 881 bool merge_reads; 882 uint8_t *start_buffer, *end_buffer; 883 QEMUIOVector qiov; 884 int ret; 885 886 assert(start->nb_bytes <= UINT_MAX - end->nb_bytes); 887 assert(start->nb_bytes + end->nb_bytes <= UINT_MAX - data_bytes); 888 assert(start->offset + start->nb_bytes <= end->offset); 889 890 if ((start->nb_bytes == 0 && end->nb_bytes == 0) || m->skip_cow) { 891 return 0; 892 } 893 894 /* If we have to read both the start and end COW regions and the 895 * middle region is not too large then perform just one read 896 * operation */ 897 merge_reads = start->nb_bytes && end->nb_bytes && data_bytes <= 16384; 898 if (merge_reads) { 899 buffer_size = start->nb_bytes + data_bytes + end->nb_bytes; 900 } else { 901 /* If we have to do two reads, add some padding in the middle 902 * if necessary to make sure that the end region is optimally 903 * aligned. */ 904 size_t align = bdrv_opt_mem_align(bs); 905 assert(align > 0 && align <= UINT_MAX); 906 assert(QEMU_ALIGN_UP(start->nb_bytes, align) <= 907 UINT_MAX - end->nb_bytes); 908 buffer_size = QEMU_ALIGN_UP(start->nb_bytes, align) + end->nb_bytes; 909 } 910 911 /* Reserve a buffer large enough to store all the data that we're 912 * going to read */ 913 start_buffer = qemu_try_blockalign(bs, buffer_size); 914 if (start_buffer == NULL) { 915 return -ENOMEM; 916 } 917 /* The part of the buffer where the end region is located */ 918 end_buffer = start_buffer + buffer_size - end->nb_bytes; 919 920 qemu_iovec_init(&qiov, 2 + (m->data_qiov ? 921 qemu_iovec_subvec_niov(m->data_qiov, 922 m->data_qiov_offset, 923 data_bytes) 924 : 0)); 925 926 qemu_co_mutex_unlock(&s->lock); 927 /* First we read the existing data from both COW regions. We 928 * either read the whole region in one go, or the start and end 929 * regions separately. */ 930 if (merge_reads) { 931 qemu_iovec_add(&qiov, start_buffer, buffer_size); 932 ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov); 933 } else { 934 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); 935 ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov); 936 if (ret < 0) { 937 goto fail; 938 } 939 940 qemu_iovec_reset(&qiov); 941 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); 942 ret = do_perform_cow_read(bs, m->offset, end->offset, &qiov); 943 } 944 if (ret < 0) { 945 goto fail; 946 } 947 948 /* Encrypt the data if necessary before writing it */ 949 if (bs->encrypted) { 950 ret = qcow2_co_encrypt(bs, 951 m->alloc_offset + start->offset, 952 m->offset + start->offset, 953 start_buffer, start->nb_bytes); 954 if (ret < 0) { 955 goto fail; 956 } 957 958 ret = qcow2_co_encrypt(bs, 959 m->alloc_offset + end->offset, 960 m->offset + end->offset, 961 end_buffer, end->nb_bytes); 962 if (ret < 0) { 963 goto fail; 964 } 965 } 966 967 /* And now we can write everything. If we have the guest data we 968 * can write everything in one single operation */ 969 if (m->data_qiov) { 970 qemu_iovec_reset(&qiov); 971 if (start->nb_bytes) { 972 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); 973 } 974 qemu_iovec_concat(&qiov, m->data_qiov, m->data_qiov_offset, data_bytes); 975 if (end->nb_bytes) { 976 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); 977 } 978 /* NOTE: we have a write_aio blkdebug event here followed by 979 * a cow_write one in do_perform_cow_write(), but there's only 980 * one single I/O operation */ 981 BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO); 982 ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov); 983 } else { 984 /* If there's no guest data then write both COW regions separately */ 985 qemu_iovec_reset(&qiov); 986 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); 987 ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov); 988 if (ret < 0) { 989 goto fail; 990 } 991 992 qemu_iovec_reset(&qiov); 993 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); 994 ret = do_perform_cow_write(bs, m->alloc_offset, end->offset, &qiov); 995 } 996 997 fail: 998 qemu_co_mutex_lock(&s->lock); 999 1000 /* 1001 * Before we update the L2 table to actually point to the new cluster, we 1002 * need to be sure that the refcounts have been increased and COW was 1003 * handled. 1004 */ 1005 if (ret == 0) { 1006 qcow2_cache_depends_on_flush(s->l2_table_cache); 1007 } 1008 1009 qemu_vfree(start_buffer); 1010 qemu_iovec_destroy(&qiov); 1011 return ret; 1012 } 1013 1014 int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m) 1015 { 1016 BDRVQcow2State *s = bs->opaque; 1017 int i, j = 0, l2_index, ret; 1018 uint64_t *old_cluster, *l2_slice; 1019 uint64_t cluster_offset = m->alloc_offset; 1020 1021 trace_qcow2_cluster_link_l2(qemu_coroutine_self(), m->nb_clusters); 1022 assert(m->nb_clusters > 0); 1023 1024 old_cluster = g_try_new(uint64_t, m->nb_clusters); 1025 if (old_cluster == NULL) { 1026 ret = -ENOMEM; 1027 goto err; 1028 } 1029 1030 /* copy content of unmodified sectors */ 1031 ret = perform_cow(bs, m); 1032 if (ret < 0) { 1033 goto err; 1034 } 1035 1036 /* Update L2 table. */ 1037 if (s->use_lazy_refcounts) { 1038 qcow2_mark_dirty(bs); 1039 } 1040 if (qcow2_need_accurate_refcounts(s)) { 1041 qcow2_cache_set_dependency(bs, s->l2_table_cache, 1042 s->refcount_block_cache); 1043 } 1044 1045 ret = get_cluster_table(bs, m->offset, &l2_slice, &l2_index); 1046 if (ret < 0) { 1047 goto err; 1048 } 1049 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 1050 1051 assert(l2_index + m->nb_clusters <= s->l2_slice_size); 1052 for (i = 0; i < m->nb_clusters; i++) { 1053 uint64_t offset = cluster_offset + ((uint64_t)i << s->cluster_bits); 1054 /* if two concurrent writes happen to the same unallocated cluster 1055 * each write allocates separate cluster and writes data concurrently. 1056 * The first one to complete updates l2 table with pointer to its 1057 * cluster the second one has to do RMW (which is done above by 1058 * perform_cow()), update l2 table with its cluster pointer and free 1059 * old cluster. This is what this loop does */ 1060 if (get_l2_entry(s, l2_slice, l2_index + i) != 0) { 1061 old_cluster[j++] = get_l2_entry(s, l2_slice, l2_index + i); 1062 } 1063 1064 /* The offset must fit in the offset field of the L2 table entry */ 1065 assert((offset & L2E_OFFSET_MASK) == offset); 1066 1067 set_l2_entry(s, l2_slice, l2_index + i, offset | QCOW_OFLAG_COPIED); 1068 1069 /* Update bitmap with the subclusters that were just written */ 1070 if (has_subclusters(s) && !m->prealloc) { 1071 uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); 1072 unsigned written_from = m->cow_start.offset; 1073 unsigned written_to = m->cow_end.offset + m->cow_end.nb_bytes ?: 1074 m->nb_clusters << s->cluster_bits; 1075 int first_sc, last_sc; 1076 /* Narrow written_from and written_to down to the current cluster */ 1077 written_from = MAX(written_from, i << s->cluster_bits); 1078 written_to = MIN(written_to, (i + 1) << s->cluster_bits); 1079 assert(written_from < written_to); 1080 first_sc = offset_to_sc_index(s, written_from); 1081 last_sc = offset_to_sc_index(s, written_to - 1); 1082 l2_bitmap |= QCOW_OFLAG_SUB_ALLOC_RANGE(first_sc, last_sc + 1); 1083 l2_bitmap &= ~QCOW_OFLAG_SUB_ZERO_RANGE(first_sc, last_sc + 1); 1084 set_l2_bitmap(s, l2_slice, l2_index + i, l2_bitmap); 1085 } 1086 } 1087 1088 1089 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 1090 1091 /* 1092 * If this was a COW, we need to decrease the refcount of the old cluster. 1093 * 1094 * Don't discard clusters that reach a refcount of 0 (e.g. compressed 1095 * clusters), the next write will reuse them anyway. 1096 */ 1097 if (!m->keep_old_clusters && j != 0) { 1098 for (i = 0; i < j; i++) { 1099 qcow2_free_any_clusters(bs, old_cluster[i], 1, QCOW2_DISCARD_NEVER); 1100 } 1101 } 1102 1103 ret = 0; 1104 err: 1105 g_free(old_cluster); 1106 return ret; 1107 } 1108 1109 /** 1110 * Frees the allocated clusters because the request failed and they won't 1111 * actually be linked. 1112 */ 1113 void qcow2_alloc_cluster_abort(BlockDriverState *bs, QCowL2Meta *m) 1114 { 1115 BDRVQcow2State *s = bs->opaque; 1116 if (!has_data_file(bs) && !m->keep_old_clusters) { 1117 qcow2_free_clusters(bs, m->alloc_offset, 1118 m->nb_clusters << s->cluster_bits, 1119 QCOW2_DISCARD_NEVER); 1120 } 1121 } 1122 1123 /* 1124 * For a given write request, create a new QCowL2Meta structure, add 1125 * it to @m and the BDRVQcow2State.cluster_allocs list. If the write 1126 * request does not need copy-on-write or changes to the L2 metadata 1127 * then this function does nothing. 1128 * 1129 * @host_cluster_offset points to the beginning of the first cluster. 1130 * 1131 * @guest_offset and @bytes indicate the offset and length of the 1132 * request. 1133 * 1134 * @l2_slice contains the L2 entries of all clusters involved in this 1135 * write request. 1136 * 1137 * If @keep_old is true it means that the clusters were already 1138 * allocated and will be overwritten. If false then the clusters are 1139 * new and we have to decrease the reference count of the old ones. 1140 * 1141 * Returns 0 on success, -errno on failure. 1142 */ 1143 static int calculate_l2_meta(BlockDriverState *bs, uint64_t host_cluster_offset, 1144 uint64_t guest_offset, unsigned bytes, 1145 uint64_t *l2_slice, QCowL2Meta **m, bool keep_old) 1146 { 1147 BDRVQcow2State *s = bs->opaque; 1148 int sc_index, l2_index = offset_to_l2_slice_index(s, guest_offset); 1149 uint64_t l2_entry, l2_bitmap; 1150 unsigned cow_start_from, cow_end_to; 1151 unsigned cow_start_to = offset_into_cluster(s, guest_offset); 1152 unsigned cow_end_from = cow_start_to + bytes; 1153 unsigned nb_clusters = size_to_clusters(s, cow_end_from); 1154 QCowL2Meta *old_m = *m; 1155 QCow2SubclusterType type; 1156 int i; 1157 bool skip_cow = keep_old; 1158 1159 assert(nb_clusters <= s->l2_slice_size - l2_index); 1160 1161 /* Check the type of all affected subclusters */ 1162 for (i = 0; i < nb_clusters; i++) { 1163 l2_entry = get_l2_entry(s, l2_slice, l2_index + i); 1164 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); 1165 if (skip_cow) { 1166 unsigned write_from = MAX(cow_start_to, i << s->cluster_bits); 1167 unsigned write_to = MIN(cow_end_from, (i + 1) << s->cluster_bits); 1168 int first_sc = offset_to_sc_index(s, write_from); 1169 int last_sc = offset_to_sc_index(s, write_to - 1); 1170 int cnt = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap, 1171 first_sc, &type); 1172 /* Is any of the subclusters of type != QCOW2_SUBCLUSTER_NORMAL ? */ 1173 if (type != QCOW2_SUBCLUSTER_NORMAL || first_sc + cnt <= last_sc) { 1174 skip_cow = false; 1175 } 1176 } else { 1177 /* If we can't skip the cow we can still look for invalid entries */ 1178 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, 0); 1179 } 1180 if (type == QCOW2_SUBCLUSTER_INVALID) { 1181 int l1_index = offset_to_l1_index(s, guest_offset); 1182 uint64_t l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; 1183 qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster " 1184 "entry found (L2 offset: %#" PRIx64 1185 ", L2 index: %#x)", 1186 l2_offset, l2_index + i); 1187 return -EIO; 1188 } 1189 } 1190 1191 if (skip_cow) { 1192 return 0; 1193 } 1194 1195 /* Get the L2 entry of the first cluster */ 1196 l2_entry = get_l2_entry(s, l2_slice, l2_index); 1197 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); 1198 sc_index = offset_to_sc_index(s, guest_offset); 1199 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); 1200 1201 if (!keep_old) { 1202 switch (type) { 1203 case QCOW2_SUBCLUSTER_COMPRESSED: 1204 cow_start_from = 0; 1205 break; 1206 case QCOW2_SUBCLUSTER_NORMAL: 1207 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 1208 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: 1209 if (has_subclusters(s)) { 1210 /* Skip all leading zero and unallocated subclusters */ 1211 uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC; 1212 cow_start_from = 1213 MIN(sc_index, ctz32(alloc_bitmap)) << s->subcluster_bits; 1214 } else { 1215 cow_start_from = 0; 1216 } 1217 break; 1218 case QCOW2_SUBCLUSTER_ZERO_PLAIN: 1219 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: 1220 cow_start_from = sc_index << s->subcluster_bits; 1221 break; 1222 default: 1223 g_assert_not_reached(); 1224 } 1225 } else { 1226 switch (type) { 1227 case QCOW2_SUBCLUSTER_NORMAL: 1228 cow_start_from = cow_start_to; 1229 break; 1230 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 1231 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: 1232 cow_start_from = sc_index << s->subcluster_bits; 1233 break; 1234 default: 1235 g_assert_not_reached(); 1236 } 1237 } 1238 1239 /* Get the L2 entry of the last cluster */ 1240 l2_index += nb_clusters - 1; 1241 l2_entry = get_l2_entry(s, l2_slice, l2_index); 1242 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); 1243 sc_index = offset_to_sc_index(s, guest_offset + bytes - 1); 1244 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); 1245 1246 if (!keep_old) { 1247 switch (type) { 1248 case QCOW2_SUBCLUSTER_COMPRESSED: 1249 cow_end_to = ROUND_UP(cow_end_from, s->cluster_size); 1250 break; 1251 case QCOW2_SUBCLUSTER_NORMAL: 1252 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 1253 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: 1254 cow_end_to = ROUND_UP(cow_end_from, s->cluster_size); 1255 if (has_subclusters(s)) { 1256 /* Skip all trailing zero and unallocated subclusters */ 1257 uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC; 1258 cow_end_to -= 1259 MIN(s->subclusters_per_cluster - sc_index - 1, 1260 clz32(alloc_bitmap)) << s->subcluster_bits; 1261 } 1262 break; 1263 case QCOW2_SUBCLUSTER_ZERO_PLAIN: 1264 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: 1265 cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size); 1266 break; 1267 default: 1268 g_assert_not_reached(); 1269 } 1270 } else { 1271 switch (type) { 1272 case QCOW2_SUBCLUSTER_NORMAL: 1273 cow_end_to = cow_end_from; 1274 break; 1275 case QCOW2_SUBCLUSTER_ZERO_ALLOC: 1276 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: 1277 cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size); 1278 break; 1279 default: 1280 g_assert_not_reached(); 1281 } 1282 } 1283 1284 *m = g_malloc0(sizeof(**m)); 1285 **m = (QCowL2Meta) { 1286 .next = old_m, 1287 1288 .alloc_offset = host_cluster_offset, 1289 .offset = start_of_cluster(s, guest_offset), 1290 .nb_clusters = nb_clusters, 1291 1292 .keep_old_clusters = keep_old, 1293 1294 .cow_start = { 1295 .offset = cow_start_from, 1296 .nb_bytes = cow_start_to - cow_start_from, 1297 }, 1298 .cow_end = { 1299 .offset = cow_end_from, 1300 .nb_bytes = cow_end_to - cow_end_from, 1301 }, 1302 }; 1303 1304 qemu_co_queue_init(&(*m)->dependent_requests); 1305 QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight); 1306 1307 return 0; 1308 } 1309 1310 /* 1311 * Returns true if writing to the cluster pointed to by @l2_entry 1312 * requires a new allocation (that is, if the cluster is unallocated 1313 * or has refcount > 1 and therefore cannot be written in-place). 1314 */ 1315 static bool cluster_needs_new_alloc(BlockDriverState *bs, uint64_t l2_entry) 1316 { 1317 switch (qcow2_get_cluster_type(bs, l2_entry)) { 1318 case QCOW2_CLUSTER_NORMAL: 1319 case QCOW2_CLUSTER_ZERO_ALLOC: 1320 if (l2_entry & QCOW_OFLAG_COPIED) { 1321 return false; 1322 } 1323 case QCOW2_CLUSTER_UNALLOCATED: 1324 case QCOW2_CLUSTER_COMPRESSED: 1325 case QCOW2_CLUSTER_ZERO_PLAIN: 1326 return true; 1327 default: 1328 abort(); 1329 } 1330 } 1331 1332 /* 1333 * Returns the number of contiguous clusters that can be written to 1334 * using one single write request, starting from @l2_index. 1335 * At most @nb_clusters are checked. 1336 * 1337 * If @new_alloc is true this counts clusters that are either 1338 * unallocated, or allocated but with refcount > 1 (so they need to be 1339 * newly allocated and COWed). 1340 * 1341 * If @new_alloc is false this counts clusters that are already 1342 * allocated and can be overwritten in-place (this includes clusters 1343 * of type QCOW2_CLUSTER_ZERO_ALLOC). 1344 */ 1345 static int count_single_write_clusters(BlockDriverState *bs, int nb_clusters, 1346 uint64_t *l2_slice, int l2_index, 1347 bool new_alloc) 1348 { 1349 BDRVQcow2State *s = bs->opaque; 1350 uint64_t l2_entry = get_l2_entry(s, l2_slice, l2_index); 1351 uint64_t expected_offset = l2_entry & L2E_OFFSET_MASK; 1352 int i; 1353 1354 for (i = 0; i < nb_clusters; i++) { 1355 l2_entry = get_l2_entry(s, l2_slice, l2_index + i); 1356 if (cluster_needs_new_alloc(bs, l2_entry) != new_alloc) { 1357 break; 1358 } 1359 if (!new_alloc) { 1360 if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) { 1361 break; 1362 } 1363 expected_offset += s->cluster_size; 1364 } 1365 } 1366 1367 assert(i <= nb_clusters); 1368 return i; 1369 } 1370 1371 /* 1372 * Check if there already is an AIO write request in flight which allocates 1373 * the same cluster. In this case we need to wait until the previous 1374 * request has completed and updated the L2 table accordingly. 1375 * 1376 * Returns: 1377 * 0 if there was no dependency. *cur_bytes indicates the number of 1378 * bytes from guest_offset that can be read before the next 1379 * dependency must be processed (or the request is complete) 1380 * 1381 * -EAGAIN if we had to wait for another request, previously gathered 1382 * information on cluster allocation may be invalid now. The caller 1383 * must start over anyway, so consider *cur_bytes undefined. 1384 */ 1385 static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset, 1386 uint64_t *cur_bytes, QCowL2Meta **m) 1387 { 1388 BDRVQcow2State *s = bs->opaque; 1389 QCowL2Meta *old_alloc; 1390 uint64_t bytes = *cur_bytes; 1391 1392 QLIST_FOREACH(old_alloc, &s->cluster_allocs, next_in_flight) { 1393 1394 uint64_t start = guest_offset; 1395 uint64_t end = start + bytes; 1396 uint64_t old_start = start_of_cluster(s, l2meta_cow_start(old_alloc)); 1397 uint64_t old_end = ROUND_UP(l2meta_cow_end(old_alloc), s->cluster_size); 1398 1399 if (end <= old_start || start >= old_end) { 1400 /* No intersection */ 1401 } else { 1402 if (start < old_start) { 1403 /* Stop at the start of a running allocation */ 1404 bytes = old_start - start; 1405 } else { 1406 bytes = 0; 1407 } 1408 1409 /* Stop if already an l2meta exists. After yielding, it wouldn't 1410 * be valid any more, so we'd have to clean up the old L2Metas 1411 * and deal with requests depending on them before starting to 1412 * gather new ones. Not worth the trouble. */ 1413 if (bytes == 0 && *m) { 1414 *cur_bytes = 0; 1415 return 0; 1416 } 1417 1418 if (bytes == 0) { 1419 /* Wait for the dependency to complete. We need to recheck 1420 * the free/allocated clusters when we continue. */ 1421 qemu_co_queue_wait(&old_alloc->dependent_requests, &s->lock); 1422 return -EAGAIN; 1423 } 1424 } 1425 } 1426 1427 /* Make sure that existing clusters and new allocations are only used up to 1428 * the next dependency if we shortened the request above */ 1429 *cur_bytes = bytes; 1430 1431 return 0; 1432 } 1433 1434 /* 1435 * Checks how many already allocated clusters that don't require a new 1436 * allocation there are at the given guest_offset (up to *bytes). 1437 * If *host_offset is not INV_OFFSET, only physically contiguous clusters 1438 * beginning at this host offset are counted. 1439 * 1440 * Note that guest_offset may not be cluster aligned. In this case, the 1441 * returned *host_offset points to exact byte referenced by guest_offset and 1442 * therefore isn't cluster aligned as well. 1443 * 1444 * Returns: 1445 * 0: if no allocated clusters are available at the given offset. 1446 * *bytes is normally unchanged. It is set to 0 if the cluster 1447 * is allocated and can be overwritten in-place but doesn't have 1448 * the right physical offset. 1449 * 1450 * 1: if allocated clusters that can be overwritten in place are 1451 * available at the requested offset. *bytes may have decreased 1452 * and describes the length of the area that can be written to. 1453 * 1454 * -errno: in error cases 1455 */ 1456 static int handle_copied(BlockDriverState *bs, uint64_t guest_offset, 1457 uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m) 1458 { 1459 BDRVQcow2State *s = bs->opaque; 1460 int l2_index; 1461 uint64_t l2_entry, cluster_offset; 1462 uint64_t *l2_slice; 1463 uint64_t nb_clusters; 1464 unsigned int keep_clusters; 1465 int ret; 1466 1467 trace_qcow2_handle_copied(qemu_coroutine_self(), guest_offset, *host_offset, 1468 *bytes); 1469 1470 assert(*host_offset == INV_OFFSET || offset_into_cluster(s, guest_offset) 1471 == offset_into_cluster(s, *host_offset)); 1472 1473 /* 1474 * Calculate the number of clusters to look for. We stop at L2 slice 1475 * boundaries to keep things simple. 1476 */ 1477 nb_clusters = 1478 size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes); 1479 1480 l2_index = offset_to_l2_slice_index(s, guest_offset); 1481 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); 1482 /* Limit total byte count to BDRV_REQUEST_MAX_BYTES */ 1483 nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits); 1484 1485 /* Find L2 entry for the first involved cluster */ 1486 ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index); 1487 if (ret < 0) { 1488 return ret; 1489 } 1490 1491 l2_entry = get_l2_entry(s, l2_slice, l2_index); 1492 cluster_offset = l2_entry & L2E_OFFSET_MASK; 1493 1494 if (!cluster_needs_new_alloc(bs, l2_entry)) { 1495 if (offset_into_cluster(s, cluster_offset)) { 1496 qcow2_signal_corruption(bs, true, -1, -1, "%s cluster offset " 1497 "%#" PRIx64 " unaligned (guest offset: %#" 1498 PRIx64 ")", l2_entry & QCOW_OFLAG_ZERO ? 1499 "Preallocated zero" : "Data", 1500 cluster_offset, guest_offset); 1501 ret = -EIO; 1502 goto out; 1503 } 1504 1505 /* If a specific host_offset is required, check it */ 1506 if (*host_offset != INV_OFFSET && cluster_offset != *host_offset) { 1507 *bytes = 0; 1508 ret = 0; 1509 goto out; 1510 } 1511 1512 /* We keep all QCOW_OFLAG_COPIED clusters */ 1513 keep_clusters = count_single_write_clusters(bs, nb_clusters, l2_slice, 1514 l2_index, false); 1515 assert(keep_clusters <= nb_clusters); 1516 1517 *bytes = MIN(*bytes, 1518 keep_clusters * s->cluster_size 1519 - offset_into_cluster(s, guest_offset)); 1520 assert(*bytes != 0); 1521 1522 ret = calculate_l2_meta(bs, cluster_offset, guest_offset, 1523 *bytes, l2_slice, m, true); 1524 if (ret < 0) { 1525 goto out; 1526 } 1527 1528 ret = 1; 1529 } else { 1530 ret = 0; 1531 } 1532 1533 /* Cleanup */ 1534 out: 1535 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 1536 1537 /* Only return a host offset if we actually made progress. Otherwise we 1538 * would make requirements for handle_alloc() that it can't fulfill */ 1539 if (ret > 0) { 1540 *host_offset = cluster_offset + offset_into_cluster(s, guest_offset); 1541 } 1542 1543 return ret; 1544 } 1545 1546 /* 1547 * Allocates new clusters for the given guest_offset. 1548 * 1549 * At most *nb_clusters are allocated, and on return *nb_clusters is updated to 1550 * contain the number of clusters that have been allocated and are contiguous 1551 * in the image file. 1552 * 1553 * If *host_offset is not INV_OFFSET, it specifies the offset in the image file 1554 * at which the new clusters must start. *nb_clusters can be 0 on return in 1555 * this case if the cluster at host_offset is already in use. If *host_offset 1556 * is INV_OFFSET, the clusters can be allocated anywhere in the image file. 1557 * 1558 * *host_offset is updated to contain the offset into the image file at which 1559 * the first allocated cluster starts. 1560 * 1561 * Return 0 on success and -errno in error cases. -EAGAIN means that the 1562 * function has been waiting for another request and the allocation must be 1563 * restarted, but the whole request should not be failed. 1564 */ 1565 static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset, 1566 uint64_t *host_offset, uint64_t *nb_clusters) 1567 { 1568 BDRVQcow2State *s = bs->opaque; 1569 1570 trace_qcow2_do_alloc_clusters_offset(qemu_coroutine_self(), guest_offset, 1571 *host_offset, *nb_clusters); 1572 1573 if (has_data_file(bs)) { 1574 assert(*host_offset == INV_OFFSET || 1575 *host_offset == start_of_cluster(s, guest_offset)); 1576 *host_offset = start_of_cluster(s, guest_offset); 1577 return 0; 1578 } 1579 1580 /* Allocate new clusters */ 1581 trace_qcow2_cluster_alloc_phys(qemu_coroutine_self()); 1582 if (*host_offset == INV_OFFSET) { 1583 int64_t cluster_offset = 1584 qcow2_alloc_clusters(bs, *nb_clusters * s->cluster_size); 1585 if (cluster_offset < 0) { 1586 return cluster_offset; 1587 } 1588 *host_offset = cluster_offset; 1589 return 0; 1590 } else { 1591 int64_t ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters); 1592 if (ret < 0) { 1593 return ret; 1594 } 1595 *nb_clusters = ret; 1596 return 0; 1597 } 1598 } 1599 1600 /* 1601 * Allocates new clusters for an area that is either still unallocated or 1602 * cannot be overwritten in-place. If *host_offset is not INV_OFFSET, 1603 * clusters are only allocated if the new allocation can match the specified 1604 * host offset. 1605 * 1606 * Note that guest_offset may not be cluster aligned. In this case, the 1607 * returned *host_offset points to exact byte referenced by guest_offset and 1608 * therefore isn't cluster aligned as well. 1609 * 1610 * Returns: 1611 * 0: if no clusters could be allocated. *bytes is set to 0, 1612 * *host_offset is left unchanged. 1613 * 1614 * 1: if new clusters were allocated. *bytes may be decreased if the 1615 * new allocation doesn't cover all of the requested area. 1616 * *host_offset is updated to contain the host offset of the first 1617 * newly allocated cluster. 1618 * 1619 * -errno: in error cases 1620 */ 1621 static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset, 1622 uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m) 1623 { 1624 BDRVQcow2State *s = bs->opaque; 1625 int l2_index; 1626 uint64_t *l2_slice; 1627 uint64_t nb_clusters; 1628 int ret; 1629 1630 uint64_t alloc_cluster_offset; 1631 1632 trace_qcow2_handle_alloc(qemu_coroutine_self(), guest_offset, *host_offset, 1633 *bytes); 1634 assert(*bytes > 0); 1635 1636 /* 1637 * Calculate the number of clusters to look for. We stop at L2 slice 1638 * boundaries to keep things simple. 1639 */ 1640 nb_clusters = 1641 size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes); 1642 1643 l2_index = offset_to_l2_slice_index(s, guest_offset); 1644 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); 1645 /* Limit total allocation byte count to BDRV_REQUEST_MAX_BYTES */ 1646 nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits); 1647 1648 /* Find L2 entry for the first involved cluster */ 1649 ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index); 1650 if (ret < 0) { 1651 return ret; 1652 } 1653 1654 nb_clusters = count_single_write_clusters(bs, nb_clusters, 1655 l2_slice, l2_index, true); 1656 1657 /* This function is only called when there were no non-COW clusters, so if 1658 * we can't find any unallocated or COW clusters either, something is 1659 * wrong with our code. */ 1660 assert(nb_clusters > 0); 1661 1662 /* Allocate at a given offset in the image file */ 1663 alloc_cluster_offset = *host_offset == INV_OFFSET ? INV_OFFSET : 1664 start_of_cluster(s, *host_offset); 1665 ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset, 1666 &nb_clusters); 1667 if (ret < 0) { 1668 goto out; 1669 } 1670 1671 /* Can't extend contiguous allocation */ 1672 if (nb_clusters == 0) { 1673 *bytes = 0; 1674 ret = 0; 1675 goto out; 1676 } 1677 1678 assert(alloc_cluster_offset != INV_OFFSET); 1679 1680 /* 1681 * Save info needed for meta data update. 1682 * 1683 * requested_bytes: Number of bytes from the start of the first 1684 * newly allocated cluster to the end of the (possibly shortened 1685 * before) write request. 1686 * 1687 * avail_bytes: Number of bytes from the start of the first 1688 * newly allocated to the end of the last newly allocated cluster. 1689 * 1690 * nb_bytes: The number of bytes from the start of the first 1691 * newly allocated cluster to the end of the area that the write 1692 * request actually writes to (excluding COW at the end) 1693 */ 1694 uint64_t requested_bytes = *bytes + offset_into_cluster(s, guest_offset); 1695 int avail_bytes = nb_clusters << s->cluster_bits; 1696 int nb_bytes = MIN(requested_bytes, avail_bytes); 1697 1698 *host_offset = alloc_cluster_offset + offset_into_cluster(s, guest_offset); 1699 *bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset)); 1700 assert(*bytes != 0); 1701 1702 ret = calculate_l2_meta(bs, alloc_cluster_offset, guest_offset, *bytes, 1703 l2_slice, m, false); 1704 if (ret < 0) { 1705 goto out; 1706 } 1707 1708 ret = 1; 1709 1710 out: 1711 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 1712 if (ret < 0 && *m && (*m)->nb_clusters > 0) { 1713 QLIST_REMOVE(*m, next_in_flight); 1714 } 1715 return ret; 1716 } 1717 1718 /* 1719 * alloc_cluster_offset 1720 * 1721 * For a given offset on the virtual disk, find the cluster offset in qcow2 1722 * file. If the offset is not found, allocate a new cluster. 1723 * 1724 * If the cluster was already allocated, m->nb_clusters is set to 0 and 1725 * other fields in m are meaningless. 1726 * 1727 * If the cluster is newly allocated, m->nb_clusters is set to the number of 1728 * contiguous clusters that have been allocated. In this case, the other 1729 * fields of m are valid and contain information about the first allocated 1730 * cluster. 1731 * 1732 * If the request conflicts with another write request in flight, the coroutine 1733 * is queued and will be reentered when the dependency has completed. 1734 * 1735 * Return 0 on success and -errno in error cases 1736 */ 1737 int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset, 1738 unsigned int *bytes, uint64_t *host_offset, 1739 QCowL2Meta **m) 1740 { 1741 BDRVQcow2State *s = bs->opaque; 1742 uint64_t start, remaining; 1743 uint64_t cluster_offset; 1744 uint64_t cur_bytes; 1745 int ret; 1746 1747 trace_qcow2_alloc_clusters_offset(qemu_coroutine_self(), offset, *bytes); 1748 1749 again: 1750 start = offset; 1751 remaining = *bytes; 1752 cluster_offset = INV_OFFSET; 1753 *host_offset = INV_OFFSET; 1754 cur_bytes = 0; 1755 *m = NULL; 1756 1757 while (true) { 1758 1759 if (*host_offset == INV_OFFSET && cluster_offset != INV_OFFSET) { 1760 *host_offset = start_of_cluster(s, cluster_offset); 1761 } 1762 1763 assert(remaining >= cur_bytes); 1764 1765 start += cur_bytes; 1766 remaining -= cur_bytes; 1767 1768 if (cluster_offset != INV_OFFSET) { 1769 cluster_offset += cur_bytes; 1770 } 1771 1772 if (remaining == 0) { 1773 break; 1774 } 1775 1776 cur_bytes = remaining; 1777 1778 /* 1779 * Now start gathering as many contiguous clusters as possible: 1780 * 1781 * 1. Check for overlaps with in-flight allocations 1782 * 1783 * a) Overlap not in the first cluster -> shorten this request and 1784 * let the caller handle the rest in its next loop iteration. 1785 * 1786 * b) Real overlaps of two requests. Yield and restart the search 1787 * for contiguous clusters (the situation could have changed 1788 * while we were sleeping) 1789 * 1790 * c) TODO: Request starts in the same cluster as the in-flight 1791 * allocation ends. Shorten the COW of the in-fight allocation, 1792 * set cluster_offset to write to the same cluster and set up 1793 * the right synchronisation between the in-flight request and 1794 * the new one. 1795 */ 1796 ret = handle_dependencies(bs, start, &cur_bytes, m); 1797 if (ret == -EAGAIN) { 1798 /* Currently handle_dependencies() doesn't yield if we already had 1799 * an allocation. If it did, we would have to clean up the L2Meta 1800 * structs before starting over. */ 1801 assert(*m == NULL); 1802 goto again; 1803 } else if (ret < 0) { 1804 return ret; 1805 } else if (cur_bytes == 0) { 1806 break; 1807 } else { 1808 /* handle_dependencies() may have decreased cur_bytes (shortened 1809 * the allocations below) so that the next dependency is processed 1810 * correctly during the next loop iteration. */ 1811 } 1812 1813 /* 1814 * 2. Count contiguous COPIED clusters. 1815 */ 1816 ret = handle_copied(bs, start, &cluster_offset, &cur_bytes, m); 1817 if (ret < 0) { 1818 return ret; 1819 } else if (ret) { 1820 continue; 1821 } else if (cur_bytes == 0) { 1822 break; 1823 } 1824 1825 /* 1826 * 3. If the request still hasn't completed, allocate new clusters, 1827 * considering any cluster_offset of steps 1c or 2. 1828 */ 1829 ret = handle_alloc(bs, start, &cluster_offset, &cur_bytes, m); 1830 if (ret < 0) { 1831 return ret; 1832 } else if (ret) { 1833 continue; 1834 } else { 1835 assert(cur_bytes == 0); 1836 break; 1837 } 1838 } 1839 1840 *bytes -= remaining; 1841 assert(*bytes > 0); 1842 assert(*host_offset != INV_OFFSET); 1843 1844 return 0; 1845 } 1846 1847 /* 1848 * This discards as many clusters of nb_clusters as possible at once (i.e. 1849 * all clusters in the same L2 slice) and returns the number of discarded 1850 * clusters. 1851 */ 1852 static int discard_in_l2_slice(BlockDriverState *bs, uint64_t offset, 1853 uint64_t nb_clusters, 1854 enum qcow2_discard_type type, bool full_discard) 1855 { 1856 BDRVQcow2State *s = bs->opaque; 1857 uint64_t *l2_slice; 1858 int l2_index; 1859 int ret; 1860 int i; 1861 1862 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); 1863 if (ret < 0) { 1864 return ret; 1865 } 1866 1867 /* Limit nb_clusters to one L2 slice */ 1868 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); 1869 assert(nb_clusters <= INT_MAX); 1870 1871 for (i = 0; i < nb_clusters; i++) { 1872 uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i); 1873 uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); 1874 uint64_t new_l2_entry = old_l2_entry; 1875 uint64_t new_l2_bitmap = old_l2_bitmap; 1876 QCow2ClusterType cluster_type = 1877 qcow2_get_cluster_type(bs, old_l2_entry); 1878 1879 /* 1880 * If full_discard is true, the cluster should not read back as zeroes, 1881 * but rather fall through to the backing file. 1882 * 1883 * If full_discard is false, make sure that a discarded area reads back 1884 * as zeroes for v3 images (we cannot do it for v2 without actually 1885 * writing a zero-filled buffer). We can skip the operation if the 1886 * cluster is already marked as zero, or if it's unallocated and we 1887 * don't have a backing file. 1888 * 1889 * TODO We might want to use bdrv_block_status(bs) here, but we're 1890 * holding s->lock, so that doesn't work today. 1891 */ 1892 if (full_discard) { 1893 new_l2_entry = new_l2_bitmap = 0; 1894 } else if (bs->backing || qcow2_cluster_is_allocated(cluster_type)) { 1895 if (has_subclusters(s)) { 1896 new_l2_entry = 0; 1897 new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES; 1898 } else { 1899 new_l2_entry = s->qcow_version >= 3 ? QCOW_OFLAG_ZERO : 0; 1900 } 1901 } 1902 1903 if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) { 1904 continue; 1905 } 1906 1907 /* First remove L2 entries */ 1908 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 1909 set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry); 1910 if (has_subclusters(s)) { 1911 set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap); 1912 } 1913 /* Then decrease the refcount */ 1914 qcow2_free_any_clusters(bs, old_l2_entry, 1, type); 1915 } 1916 1917 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 1918 1919 return nb_clusters; 1920 } 1921 1922 int qcow2_cluster_discard(BlockDriverState *bs, uint64_t offset, 1923 uint64_t bytes, enum qcow2_discard_type type, 1924 bool full_discard) 1925 { 1926 BDRVQcow2State *s = bs->opaque; 1927 uint64_t end_offset = offset + bytes; 1928 uint64_t nb_clusters; 1929 int64_t cleared; 1930 int ret; 1931 1932 /* Caller must pass aligned values, except at image end */ 1933 assert(QEMU_IS_ALIGNED(offset, s->cluster_size)); 1934 assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) || 1935 end_offset == bs->total_sectors << BDRV_SECTOR_BITS); 1936 1937 nb_clusters = size_to_clusters(s, bytes); 1938 1939 s->cache_discards = true; 1940 1941 /* Each L2 slice is handled by its own loop iteration */ 1942 while (nb_clusters > 0) { 1943 cleared = discard_in_l2_slice(bs, offset, nb_clusters, type, 1944 full_discard); 1945 if (cleared < 0) { 1946 ret = cleared; 1947 goto fail; 1948 } 1949 1950 nb_clusters -= cleared; 1951 offset += (cleared * s->cluster_size); 1952 } 1953 1954 ret = 0; 1955 fail: 1956 s->cache_discards = false; 1957 qcow2_process_discards(bs, ret); 1958 1959 return ret; 1960 } 1961 1962 /* 1963 * This zeroes as many clusters of nb_clusters as possible at once (i.e. 1964 * all clusters in the same L2 slice) and returns the number of zeroed 1965 * clusters. 1966 */ 1967 static int zero_in_l2_slice(BlockDriverState *bs, uint64_t offset, 1968 uint64_t nb_clusters, int flags) 1969 { 1970 BDRVQcow2State *s = bs->opaque; 1971 uint64_t *l2_slice; 1972 int l2_index; 1973 int ret; 1974 int i; 1975 1976 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); 1977 if (ret < 0) { 1978 return ret; 1979 } 1980 1981 /* Limit nb_clusters to one L2 slice */ 1982 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); 1983 assert(nb_clusters <= INT_MAX); 1984 1985 for (i = 0; i < nb_clusters; i++) { 1986 uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i); 1987 uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); 1988 QCow2ClusterType type = qcow2_get_cluster_type(bs, old_l2_entry); 1989 bool unmap = (type == QCOW2_CLUSTER_COMPRESSED) || 1990 ((flags & BDRV_REQ_MAY_UNMAP) && qcow2_cluster_is_allocated(type)); 1991 uint64_t new_l2_entry = unmap ? 0 : old_l2_entry; 1992 uint64_t new_l2_bitmap = old_l2_bitmap; 1993 1994 if (has_subclusters(s)) { 1995 new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES; 1996 } else { 1997 new_l2_entry |= QCOW_OFLAG_ZERO; 1998 } 1999 2000 if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) { 2001 continue; 2002 } 2003 2004 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 2005 if (unmap) { 2006 qcow2_free_any_clusters(bs, old_l2_entry, 1, QCOW2_DISCARD_REQUEST); 2007 } 2008 set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry); 2009 if (has_subclusters(s)) { 2010 set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap); 2011 } 2012 } 2013 2014 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 2015 2016 return nb_clusters; 2017 } 2018 2019 static int zero_l2_subclusters(BlockDriverState *bs, uint64_t offset, 2020 unsigned nb_subclusters) 2021 { 2022 BDRVQcow2State *s = bs->opaque; 2023 uint64_t *l2_slice; 2024 uint64_t old_l2_bitmap, l2_bitmap; 2025 int l2_index, ret, sc = offset_to_sc_index(s, offset); 2026 2027 /* For full clusters use zero_in_l2_slice() instead */ 2028 assert(nb_subclusters > 0 && nb_subclusters < s->subclusters_per_cluster); 2029 assert(sc + nb_subclusters <= s->subclusters_per_cluster); 2030 assert(offset_into_subcluster(s, offset) == 0); 2031 2032 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); 2033 if (ret < 0) { 2034 return ret; 2035 } 2036 2037 switch (qcow2_get_cluster_type(bs, get_l2_entry(s, l2_slice, l2_index))) { 2038 case QCOW2_CLUSTER_COMPRESSED: 2039 ret = -ENOTSUP; /* We cannot partially zeroize compressed clusters */ 2040 goto out; 2041 case QCOW2_CLUSTER_NORMAL: 2042 case QCOW2_CLUSTER_UNALLOCATED: 2043 break; 2044 default: 2045 g_assert_not_reached(); 2046 } 2047 2048 old_l2_bitmap = l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); 2049 2050 l2_bitmap |= QCOW_OFLAG_SUB_ZERO_RANGE(sc, sc + nb_subclusters); 2051 l2_bitmap &= ~QCOW_OFLAG_SUB_ALLOC_RANGE(sc, sc + nb_subclusters); 2052 2053 if (old_l2_bitmap != l2_bitmap) { 2054 set_l2_bitmap(s, l2_slice, l2_index, l2_bitmap); 2055 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 2056 } 2057 2058 ret = 0; 2059 out: 2060 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 2061 2062 return ret; 2063 } 2064 2065 int qcow2_subcluster_zeroize(BlockDriverState *bs, uint64_t offset, 2066 uint64_t bytes, int flags) 2067 { 2068 BDRVQcow2State *s = bs->opaque; 2069 uint64_t end_offset = offset + bytes; 2070 uint64_t nb_clusters; 2071 unsigned head, tail; 2072 int64_t cleared; 2073 int ret; 2074 2075 /* If we have to stay in sync with an external data file, zero out 2076 * s->data_file first. */ 2077 if (data_file_is_raw(bs)) { 2078 assert(has_data_file(bs)); 2079 ret = bdrv_co_pwrite_zeroes(s->data_file, offset, bytes, flags); 2080 if (ret < 0) { 2081 return ret; 2082 } 2083 } 2084 2085 /* Caller must pass aligned values, except at image end */ 2086 assert(offset_into_subcluster(s, offset) == 0); 2087 assert(offset_into_subcluster(s, end_offset) == 0 || 2088 end_offset >= bs->total_sectors << BDRV_SECTOR_BITS); 2089 2090 /* 2091 * The zero flag is only supported by version 3 and newer. However, if we 2092 * have no backing file, we can resort to discard in version 2. 2093 */ 2094 if (s->qcow_version < 3) { 2095 if (!bs->backing) { 2096 return qcow2_cluster_discard(bs, offset, bytes, 2097 QCOW2_DISCARD_REQUEST, false); 2098 } 2099 return -ENOTSUP; 2100 } 2101 2102 head = MIN(end_offset, ROUND_UP(offset, s->cluster_size)) - offset; 2103 offset += head; 2104 2105 tail = (end_offset >= bs->total_sectors << BDRV_SECTOR_BITS) ? 0 : 2106 end_offset - MAX(offset, start_of_cluster(s, end_offset)); 2107 end_offset -= tail; 2108 2109 s->cache_discards = true; 2110 2111 if (head) { 2112 ret = zero_l2_subclusters(bs, offset - head, 2113 size_to_subclusters(s, head)); 2114 if (ret < 0) { 2115 goto fail; 2116 } 2117 } 2118 2119 /* Each L2 slice is handled by its own loop iteration */ 2120 nb_clusters = size_to_clusters(s, end_offset - offset); 2121 2122 while (nb_clusters > 0) { 2123 cleared = zero_in_l2_slice(bs, offset, nb_clusters, flags); 2124 if (cleared < 0) { 2125 ret = cleared; 2126 goto fail; 2127 } 2128 2129 nb_clusters -= cleared; 2130 offset += (cleared * s->cluster_size); 2131 } 2132 2133 if (tail) { 2134 ret = zero_l2_subclusters(bs, end_offset, size_to_subclusters(s, tail)); 2135 if (ret < 0) { 2136 goto fail; 2137 } 2138 } 2139 2140 ret = 0; 2141 fail: 2142 s->cache_discards = false; 2143 qcow2_process_discards(bs, ret); 2144 2145 return ret; 2146 } 2147 2148 /* 2149 * Expands all zero clusters in a specific L1 table (or deallocates them, for 2150 * non-backed non-pre-allocated zero clusters). 2151 * 2152 * l1_entries and *visited_l1_entries are used to keep track of progress for 2153 * status_cb(). l1_entries contains the total number of L1 entries and 2154 * *visited_l1_entries counts all visited L1 entries. 2155 */ 2156 static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table, 2157 int l1_size, int64_t *visited_l1_entries, 2158 int64_t l1_entries, 2159 BlockDriverAmendStatusCB *status_cb, 2160 void *cb_opaque) 2161 { 2162 BDRVQcow2State *s = bs->opaque; 2163 bool is_active_l1 = (l1_table == s->l1_table); 2164 uint64_t *l2_slice = NULL; 2165 unsigned slice, slice_size2, n_slices; 2166 int ret; 2167 int i, j; 2168 2169 /* qcow2_downgrade() is not allowed in images with subclusters */ 2170 assert(!has_subclusters(s)); 2171 2172 slice_size2 = s->l2_slice_size * l2_entry_size(s); 2173 n_slices = s->cluster_size / slice_size2; 2174 2175 if (!is_active_l1) { 2176 /* inactive L2 tables require a buffer to be stored in when loading 2177 * them from disk */ 2178 l2_slice = qemu_try_blockalign(bs->file->bs, slice_size2); 2179 if (l2_slice == NULL) { 2180 return -ENOMEM; 2181 } 2182 } 2183 2184 for (i = 0; i < l1_size; i++) { 2185 uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK; 2186 uint64_t l2_refcount; 2187 2188 if (!l2_offset) { 2189 /* unallocated */ 2190 (*visited_l1_entries)++; 2191 if (status_cb) { 2192 status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque); 2193 } 2194 continue; 2195 } 2196 2197 if (offset_into_cluster(s, l2_offset)) { 2198 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" 2199 PRIx64 " unaligned (L1 index: %#x)", 2200 l2_offset, i); 2201 ret = -EIO; 2202 goto fail; 2203 } 2204 2205 ret = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits, 2206 &l2_refcount); 2207 if (ret < 0) { 2208 goto fail; 2209 } 2210 2211 for (slice = 0; slice < n_slices; slice++) { 2212 uint64_t slice_offset = l2_offset + slice * slice_size2; 2213 bool l2_dirty = false; 2214 if (is_active_l1) { 2215 /* get active L2 tables from cache */ 2216 ret = qcow2_cache_get(bs, s->l2_table_cache, slice_offset, 2217 (void **)&l2_slice); 2218 } else { 2219 /* load inactive L2 tables from disk */ 2220 ret = bdrv_pread(bs->file, slice_offset, l2_slice, slice_size2); 2221 } 2222 if (ret < 0) { 2223 goto fail; 2224 } 2225 2226 for (j = 0; j < s->l2_slice_size; j++) { 2227 uint64_t l2_entry = get_l2_entry(s, l2_slice, j); 2228 int64_t offset = l2_entry & L2E_OFFSET_MASK; 2229 QCow2ClusterType cluster_type = 2230 qcow2_get_cluster_type(bs, l2_entry); 2231 2232 if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN && 2233 cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) { 2234 continue; 2235 } 2236 2237 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { 2238 if (!bs->backing) { 2239 /* 2240 * not backed; therefore we can simply deallocate the 2241 * cluster. No need to call set_l2_bitmap(), this 2242 * function doesn't support images with subclusters. 2243 */ 2244 set_l2_entry(s, l2_slice, j, 0); 2245 l2_dirty = true; 2246 continue; 2247 } 2248 2249 offset = qcow2_alloc_clusters(bs, s->cluster_size); 2250 if (offset < 0) { 2251 ret = offset; 2252 goto fail; 2253 } 2254 2255 /* The offset must fit in the offset field */ 2256 assert((offset & L2E_OFFSET_MASK) == offset); 2257 2258 if (l2_refcount > 1) { 2259 /* For shared L2 tables, set the refcount accordingly 2260 * (it is already 1 and needs to be l2_refcount) */ 2261 ret = qcow2_update_cluster_refcount( 2262 bs, offset >> s->cluster_bits, 2263 refcount_diff(1, l2_refcount), false, 2264 QCOW2_DISCARD_OTHER); 2265 if (ret < 0) { 2266 qcow2_free_clusters(bs, offset, s->cluster_size, 2267 QCOW2_DISCARD_OTHER); 2268 goto fail; 2269 } 2270 } 2271 } 2272 2273 if (offset_into_cluster(s, offset)) { 2274 int l2_index = slice * s->l2_slice_size + j; 2275 qcow2_signal_corruption( 2276 bs, true, -1, -1, 2277 "Cluster allocation offset " 2278 "%#" PRIx64 " unaligned (L2 offset: %#" 2279 PRIx64 ", L2 index: %#x)", offset, 2280 l2_offset, l2_index); 2281 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { 2282 qcow2_free_clusters(bs, offset, s->cluster_size, 2283 QCOW2_DISCARD_ALWAYS); 2284 } 2285 ret = -EIO; 2286 goto fail; 2287 } 2288 2289 ret = qcow2_pre_write_overlap_check(bs, 0, offset, 2290 s->cluster_size, true); 2291 if (ret < 0) { 2292 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { 2293 qcow2_free_clusters(bs, offset, s->cluster_size, 2294 QCOW2_DISCARD_ALWAYS); 2295 } 2296 goto fail; 2297 } 2298 2299 ret = bdrv_pwrite_zeroes(s->data_file, offset, 2300 s->cluster_size, 0); 2301 if (ret < 0) { 2302 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { 2303 qcow2_free_clusters(bs, offset, s->cluster_size, 2304 QCOW2_DISCARD_ALWAYS); 2305 } 2306 goto fail; 2307 } 2308 2309 if (l2_refcount == 1) { 2310 set_l2_entry(s, l2_slice, j, offset | QCOW_OFLAG_COPIED); 2311 } else { 2312 set_l2_entry(s, l2_slice, j, offset); 2313 } 2314 /* 2315 * No need to call set_l2_bitmap() after set_l2_entry() because 2316 * this function doesn't support images with subclusters. 2317 */ 2318 l2_dirty = true; 2319 } 2320 2321 if (is_active_l1) { 2322 if (l2_dirty) { 2323 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); 2324 qcow2_cache_depends_on_flush(s->l2_table_cache); 2325 } 2326 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 2327 } else { 2328 if (l2_dirty) { 2329 ret = qcow2_pre_write_overlap_check( 2330 bs, QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2, 2331 slice_offset, slice_size2, false); 2332 if (ret < 0) { 2333 goto fail; 2334 } 2335 2336 ret = bdrv_pwrite(bs->file, slice_offset, 2337 l2_slice, slice_size2); 2338 if (ret < 0) { 2339 goto fail; 2340 } 2341 } 2342 } 2343 } 2344 2345 (*visited_l1_entries)++; 2346 if (status_cb) { 2347 status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque); 2348 } 2349 } 2350 2351 ret = 0; 2352 2353 fail: 2354 if (l2_slice) { 2355 if (!is_active_l1) { 2356 qemu_vfree(l2_slice); 2357 } else { 2358 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); 2359 } 2360 } 2361 return ret; 2362 } 2363 2364 /* 2365 * For backed images, expands all zero clusters on the image. For non-backed 2366 * images, deallocates all non-pre-allocated zero clusters (and claims the 2367 * allocation for pre-allocated ones). This is important for downgrading to a 2368 * qcow2 version which doesn't yet support metadata zero clusters. 2369 */ 2370 int qcow2_expand_zero_clusters(BlockDriverState *bs, 2371 BlockDriverAmendStatusCB *status_cb, 2372 void *cb_opaque) 2373 { 2374 BDRVQcow2State *s = bs->opaque; 2375 uint64_t *l1_table = NULL; 2376 int64_t l1_entries = 0, visited_l1_entries = 0; 2377 int ret; 2378 int i, j; 2379 2380 if (status_cb) { 2381 l1_entries = s->l1_size; 2382 for (i = 0; i < s->nb_snapshots; i++) { 2383 l1_entries += s->snapshots[i].l1_size; 2384 } 2385 } 2386 2387 ret = expand_zero_clusters_in_l1(bs, s->l1_table, s->l1_size, 2388 &visited_l1_entries, l1_entries, 2389 status_cb, cb_opaque); 2390 if (ret < 0) { 2391 goto fail; 2392 } 2393 2394 /* Inactive L1 tables may point to active L2 tables - therefore it is 2395 * necessary to flush the L2 table cache before trying to access the L2 2396 * tables pointed to by inactive L1 entries (else we might try to expand 2397 * zero clusters that have already been expanded); furthermore, it is also 2398 * necessary to empty the L2 table cache, since it may contain tables which 2399 * are now going to be modified directly on disk, bypassing the cache. 2400 * qcow2_cache_empty() does both for us. */ 2401 ret = qcow2_cache_empty(bs, s->l2_table_cache); 2402 if (ret < 0) { 2403 goto fail; 2404 } 2405 2406 for (i = 0; i < s->nb_snapshots; i++) { 2407 int l1_size2; 2408 uint64_t *new_l1_table; 2409 Error *local_err = NULL; 2410 2411 ret = qcow2_validate_table(bs, s->snapshots[i].l1_table_offset, 2412 s->snapshots[i].l1_size, sizeof(uint64_t), 2413 QCOW_MAX_L1_SIZE, "Snapshot L1 table", 2414 &local_err); 2415 if (ret < 0) { 2416 error_report_err(local_err); 2417 goto fail; 2418 } 2419 2420 l1_size2 = s->snapshots[i].l1_size * sizeof(uint64_t); 2421 new_l1_table = g_try_realloc(l1_table, l1_size2); 2422 2423 if (!new_l1_table) { 2424 ret = -ENOMEM; 2425 goto fail; 2426 } 2427 2428 l1_table = new_l1_table; 2429 2430 ret = bdrv_pread(bs->file, s->snapshots[i].l1_table_offset, 2431 l1_table, l1_size2); 2432 if (ret < 0) { 2433 goto fail; 2434 } 2435 2436 for (j = 0; j < s->snapshots[i].l1_size; j++) { 2437 be64_to_cpus(&l1_table[j]); 2438 } 2439 2440 ret = expand_zero_clusters_in_l1(bs, l1_table, s->snapshots[i].l1_size, 2441 &visited_l1_entries, l1_entries, 2442 status_cb, cb_opaque); 2443 if (ret < 0) { 2444 goto fail; 2445 } 2446 } 2447 2448 ret = 0; 2449 2450 fail: 2451 g_free(l1_table); 2452 return ret; 2453 } 2454