1 /* 2 * Block driver for RAW files (posix) 3 * 4 * Copyright (c) 2006 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu-common.h" 27 #include "qapi/error.h" 28 #include "qemu/cutils.h" 29 #include "qemu/error-report.h" 30 #include "block/block_int.h" 31 #include "qemu/module.h" 32 #include "qemu/option.h" 33 #include "qemu/units.h" 34 #include "trace.h" 35 #include "block/thread-pool.h" 36 #include "qemu/iov.h" 37 #include "block/raw-aio.h" 38 #include "qapi/qmp/qdict.h" 39 #include "qapi/qmp/qstring.h" 40 41 #include "scsi/pr-manager.h" 42 #include "scsi/constants.h" 43 44 #if defined(__APPLE__) && (__MACH__) 45 #include <sys/ioctl.h> 46 #if defined(HAVE_HOST_BLOCK_DEVICE) 47 #include <paths.h> 48 #include <sys/param.h> 49 #include <sys/mount.h> 50 #include <IOKit/IOKitLib.h> 51 #include <IOKit/IOBSD.h> 52 #include <IOKit/storage/IOMediaBSDClient.h> 53 #include <IOKit/storage/IOMedia.h> 54 #include <IOKit/storage/IOCDMedia.h> 55 //#include <IOKit/storage/IOCDTypes.h> 56 #include <IOKit/storage/IODVDMedia.h> 57 #include <CoreFoundation/CoreFoundation.h> 58 #endif /* defined(HAVE_HOST_BLOCK_DEVICE) */ 59 #endif 60 61 #ifdef __sun__ 62 #define _POSIX_PTHREAD_SEMANTICS 1 63 #include <sys/dkio.h> 64 #endif 65 #ifdef __linux__ 66 #include <sys/ioctl.h> 67 #include <sys/param.h> 68 #include <sys/syscall.h> 69 #include <sys/vfs.h> 70 #include <linux/cdrom.h> 71 #include <linux/fd.h> 72 #include <linux/fs.h> 73 #include <linux/hdreg.h> 74 #include <linux/magic.h> 75 #include <scsi/sg.h> 76 #ifdef __s390__ 77 #include <asm/dasd.h> 78 #endif 79 #ifndef FS_NOCOW_FL 80 #define FS_NOCOW_FL 0x00800000 /* Do not cow file */ 81 #endif 82 #endif 83 #if defined(CONFIG_FALLOCATE_PUNCH_HOLE) || defined(CONFIG_FALLOCATE_ZERO_RANGE) 84 #include <linux/falloc.h> 85 #endif 86 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__) 87 #include <sys/disk.h> 88 #include <sys/cdio.h> 89 #endif 90 91 #ifdef __OpenBSD__ 92 #include <sys/ioctl.h> 93 #include <sys/disklabel.h> 94 #include <sys/dkio.h> 95 #endif 96 97 #ifdef __NetBSD__ 98 #include <sys/ioctl.h> 99 #include <sys/disklabel.h> 100 #include <sys/dkio.h> 101 #include <sys/disk.h> 102 #endif 103 104 #ifdef __DragonFly__ 105 #include <sys/ioctl.h> 106 #include <sys/diskslice.h> 107 #endif 108 109 #ifdef CONFIG_XFS 110 #include <xfs/xfs.h> 111 #endif 112 113 /* OS X does not have O_DSYNC */ 114 #ifndef O_DSYNC 115 #ifdef O_SYNC 116 #define O_DSYNC O_SYNC 117 #elif defined(O_FSYNC) 118 #define O_DSYNC O_FSYNC 119 #endif 120 #endif 121 122 /* Approximate O_DIRECT with O_DSYNC if O_DIRECT isn't available */ 123 #ifndef O_DIRECT 124 #define O_DIRECT O_DSYNC 125 #endif 126 127 #define FTYPE_FILE 0 128 #define FTYPE_CD 1 129 130 #define MAX_BLOCKSIZE 4096 131 132 /* Posix file locking bytes. Libvirt takes byte 0, we start from higher bytes, 133 * leaving a few more bytes for its future use. */ 134 #define RAW_LOCK_PERM_BASE 100 135 #define RAW_LOCK_SHARED_BASE 200 136 137 typedef struct BDRVRawState { 138 int fd; 139 bool use_lock; 140 int type; 141 int open_flags; 142 size_t buf_align; 143 144 /* The current permissions. */ 145 uint64_t perm; 146 uint64_t shared_perm; 147 148 /* The perms bits whose corresponding bytes are already locked in 149 * s->fd. */ 150 uint64_t locked_perm; 151 uint64_t locked_shared_perm; 152 153 int perm_change_fd; 154 int perm_change_flags; 155 BDRVReopenState *reopen_state; 156 157 #ifdef CONFIG_XFS 158 bool is_xfs:1; 159 #endif 160 bool has_discard:1; 161 bool has_write_zeroes:1; 162 bool discard_zeroes:1; 163 bool use_linux_aio:1; 164 bool use_linux_io_uring:1; 165 int page_cache_inconsistent; /* errno from fdatasync failure */ 166 bool has_fallocate; 167 bool needs_alignment; 168 bool drop_cache; 169 bool check_cache_dropped; 170 struct { 171 uint64_t discard_nb_ok; 172 uint64_t discard_nb_failed; 173 uint64_t discard_bytes_ok; 174 } stats; 175 176 PRManager *pr_mgr; 177 } BDRVRawState; 178 179 typedef struct BDRVRawReopenState { 180 int open_flags; 181 bool drop_cache; 182 bool check_cache_dropped; 183 } BDRVRawReopenState; 184 185 static int fd_open(BlockDriverState *bs) 186 { 187 BDRVRawState *s = bs->opaque; 188 189 /* this is just to ensure s->fd is sane (its called by io ops) */ 190 if (s->fd >= 0) { 191 return 0; 192 } 193 return -EIO; 194 } 195 196 static int64_t raw_getlength(BlockDriverState *bs); 197 198 typedef struct RawPosixAIOData { 199 BlockDriverState *bs; 200 int aio_type; 201 int aio_fildes; 202 203 off_t aio_offset; 204 uint64_t aio_nbytes; 205 206 union { 207 struct { 208 struct iovec *iov; 209 int niov; 210 } io; 211 struct { 212 uint64_t cmd; 213 void *buf; 214 } ioctl; 215 struct { 216 int aio_fd2; 217 off_t aio_offset2; 218 } copy_range; 219 struct { 220 PreallocMode prealloc; 221 Error **errp; 222 } truncate; 223 }; 224 } RawPosixAIOData; 225 226 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) 227 static int cdrom_reopen(BlockDriverState *bs); 228 #endif 229 230 /* 231 * Elide EAGAIN and EACCES details when failing to lock, as this 232 * indicates that the specified file region is already locked by 233 * another process, which is considered a common scenario. 234 */ 235 #define raw_lock_error_setg_errno(errp, err, fmt, ...) \ 236 do { \ 237 if ((err) == EAGAIN || (err) == EACCES) { \ 238 error_setg((errp), (fmt), ## __VA_ARGS__); \ 239 } else { \ 240 error_setg_errno((errp), (err), (fmt), ## __VA_ARGS__); \ 241 } \ 242 } while (0) 243 244 #if defined(__NetBSD__) 245 static int raw_normalize_devicepath(const char **filename, Error **errp) 246 { 247 static char namebuf[PATH_MAX]; 248 const char *dp, *fname; 249 struct stat sb; 250 251 fname = *filename; 252 dp = strrchr(fname, '/'); 253 if (lstat(fname, &sb) < 0) { 254 error_setg_file_open(errp, errno, fname); 255 return -errno; 256 } 257 258 if (!S_ISBLK(sb.st_mode)) { 259 return 0; 260 } 261 262 if (dp == NULL) { 263 snprintf(namebuf, PATH_MAX, "r%s", fname); 264 } else { 265 snprintf(namebuf, PATH_MAX, "%.*s/r%s", 266 (int)(dp - fname), fname, dp + 1); 267 } 268 *filename = namebuf; 269 warn_report("%s is a block device, using %s", fname, *filename); 270 271 return 0; 272 } 273 #else 274 static int raw_normalize_devicepath(const char **filename, Error **errp) 275 { 276 return 0; 277 } 278 #endif 279 280 /* 281 * Get logical block size via ioctl. On success store it in @sector_size_p. 282 */ 283 static int probe_logical_blocksize(int fd, unsigned int *sector_size_p) 284 { 285 unsigned int sector_size; 286 bool success = false; 287 int i; 288 289 errno = ENOTSUP; 290 static const unsigned long ioctl_list[] = { 291 #ifdef BLKSSZGET 292 BLKSSZGET, 293 #endif 294 #ifdef DKIOCGETBLOCKSIZE 295 DKIOCGETBLOCKSIZE, 296 #endif 297 #ifdef DIOCGSECTORSIZE 298 DIOCGSECTORSIZE, 299 #endif 300 }; 301 302 /* Try a few ioctls to get the right size */ 303 for (i = 0; i < (int)ARRAY_SIZE(ioctl_list); i++) { 304 if (ioctl(fd, ioctl_list[i], §or_size) >= 0) { 305 *sector_size_p = sector_size; 306 success = true; 307 } 308 } 309 310 return success ? 0 : -errno; 311 } 312 313 /** 314 * Get physical block size of @fd. 315 * On success, store it in @blk_size and return 0. 316 * On failure, return -errno. 317 */ 318 static int probe_physical_blocksize(int fd, unsigned int *blk_size) 319 { 320 #ifdef BLKPBSZGET 321 if (ioctl(fd, BLKPBSZGET, blk_size) < 0) { 322 return -errno; 323 } 324 return 0; 325 #else 326 return -ENOTSUP; 327 #endif 328 } 329 330 /* 331 * Returns true if no alignment restrictions are necessary even for files 332 * opened with O_DIRECT. 333 * 334 * raw_probe_alignment() probes the required alignment and assume that 1 means 335 * the probing failed, so it falls back to a safe default of 4k. This can be 336 * avoided if we know that byte alignment is okay for the file. 337 */ 338 static bool dio_byte_aligned(int fd) 339 { 340 #ifdef __linux__ 341 struct statfs buf; 342 int ret; 343 344 ret = fstatfs(fd, &buf); 345 if (ret == 0 && buf.f_type == NFS_SUPER_MAGIC) { 346 return true; 347 } 348 #endif 349 return false; 350 } 351 352 /* Check if read is allowed with given memory buffer and length. 353 * 354 * This function is used to check O_DIRECT memory buffer and request alignment. 355 */ 356 static bool raw_is_io_aligned(int fd, void *buf, size_t len) 357 { 358 ssize_t ret = pread(fd, buf, len, 0); 359 360 if (ret >= 0) { 361 return true; 362 } 363 364 #ifdef __linux__ 365 /* The Linux kernel returns EINVAL for misaligned O_DIRECT reads. Ignore 366 * other errors (e.g. real I/O error), which could happen on a failed 367 * drive, since we only care about probing alignment. 368 */ 369 if (errno != EINVAL) { 370 return true; 371 } 372 #endif 373 374 return false; 375 } 376 377 static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp) 378 { 379 BDRVRawState *s = bs->opaque; 380 char *buf; 381 size_t max_align = MAX(MAX_BLOCKSIZE, qemu_real_host_page_size); 382 size_t alignments[] = {1, 512, 1024, 2048, 4096}; 383 384 /* For SCSI generic devices the alignment is not really used. 385 With buffered I/O, we don't have any restrictions. */ 386 if (bdrv_is_sg(bs) || !s->needs_alignment) { 387 bs->bl.request_alignment = 1; 388 s->buf_align = 1; 389 return; 390 } 391 392 bs->bl.request_alignment = 0; 393 s->buf_align = 0; 394 /* Let's try to use the logical blocksize for the alignment. */ 395 if (probe_logical_blocksize(fd, &bs->bl.request_alignment) < 0) { 396 bs->bl.request_alignment = 0; 397 } 398 #ifdef CONFIG_XFS 399 if (s->is_xfs) { 400 struct dioattr da; 401 if (xfsctl(NULL, fd, XFS_IOC_DIOINFO, &da) >= 0) { 402 bs->bl.request_alignment = da.d_miniosz; 403 /* The kernel returns wrong information for d_mem */ 404 /* s->buf_align = da.d_mem; */ 405 } 406 } 407 #endif 408 409 /* 410 * If we could not get the sizes so far, we can only guess them. First try 411 * to detect request alignment, since it is more likely to succeed. Then 412 * try to detect buf_align, which cannot be detected in some cases (e.g. 413 * Gluster). If buf_align cannot be detected, we fallback to the value of 414 * request_alignment. 415 */ 416 417 if (!bs->bl.request_alignment) { 418 int i; 419 size_t align; 420 buf = qemu_memalign(max_align, max_align); 421 for (i = 0; i < ARRAY_SIZE(alignments); i++) { 422 align = alignments[i]; 423 if (raw_is_io_aligned(fd, buf, align)) { 424 /* Fallback to safe value. */ 425 bs->bl.request_alignment = (align != 1) ? align : max_align; 426 break; 427 } 428 } 429 qemu_vfree(buf); 430 } 431 432 if (!s->buf_align) { 433 int i; 434 size_t align; 435 buf = qemu_memalign(max_align, 2 * max_align); 436 for (i = 0; i < ARRAY_SIZE(alignments); i++) { 437 align = alignments[i]; 438 if (raw_is_io_aligned(fd, buf + align, max_align)) { 439 /* Fallback to request_alignment. */ 440 s->buf_align = (align != 1) ? align : bs->bl.request_alignment; 441 break; 442 } 443 } 444 qemu_vfree(buf); 445 } 446 447 if (!s->buf_align || !bs->bl.request_alignment) { 448 error_setg(errp, "Could not find working O_DIRECT alignment"); 449 error_append_hint(errp, "Try cache.direct=off\n"); 450 } 451 } 452 453 static int check_hdev_writable(int fd) 454 { 455 #if defined(BLKROGET) 456 /* Linux block devices can be configured "read-only" using blockdev(8). 457 * This is independent of device node permissions and therefore open(2) 458 * with O_RDWR succeeds. Actual writes fail with EPERM. 459 * 460 * bdrv_open() is supposed to fail if the disk is read-only. Explicitly 461 * check for read-only block devices so that Linux block devices behave 462 * properly. 463 */ 464 struct stat st; 465 int readonly = 0; 466 467 if (fstat(fd, &st)) { 468 return -errno; 469 } 470 471 if (!S_ISBLK(st.st_mode)) { 472 return 0; 473 } 474 475 if (ioctl(fd, BLKROGET, &readonly) < 0) { 476 return -errno; 477 } 478 479 if (readonly) { 480 return -EACCES; 481 } 482 #endif /* defined(BLKROGET) */ 483 return 0; 484 } 485 486 static void raw_parse_flags(int bdrv_flags, int *open_flags, bool has_writers) 487 { 488 bool read_write = false; 489 assert(open_flags != NULL); 490 491 *open_flags |= O_BINARY; 492 *open_flags &= ~O_ACCMODE; 493 494 if (bdrv_flags & BDRV_O_AUTO_RDONLY) { 495 read_write = has_writers; 496 } else if (bdrv_flags & BDRV_O_RDWR) { 497 read_write = true; 498 } 499 500 if (read_write) { 501 *open_flags |= O_RDWR; 502 } else { 503 *open_flags |= O_RDONLY; 504 } 505 506 /* Use O_DSYNC for write-through caching, no flags for write-back caching, 507 * and O_DIRECT for no caching. */ 508 if ((bdrv_flags & BDRV_O_NOCACHE)) { 509 *open_flags |= O_DIRECT; 510 } 511 } 512 513 static void raw_parse_filename(const char *filename, QDict *options, 514 Error **errp) 515 { 516 bdrv_parse_filename_strip_prefix(filename, "file:", options); 517 } 518 519 static QemuOptsList raw_runtime_opts = { 520 .name = "raw", 521 .head = QTAILQ_HEAD_INITIALIZER(raw_runtime_opts.head), 522 .desc = { 523 { 524 .name = "filename", 525 .type = QEMU_OPT_STRING, 526 .help = "File name of the image", 527 }, 528 { 529 .name = "aio", 530 .type = QEMU_OPT_STRING, 531 .help = "host AIO implementation (threads, native, io_uring)", 532 }, 533 { 534 .name = "locking", 535 .type = QEMU_OPT_STRING, 536 .help = "file locking mode (on/off/auto, default: auto)", 537 }, 538 { 539 .name = "pr-manager", 540 .type = QEMU_OPT_STRING, 541 .help = "id of persistent reservation manager object (default: none)", 542 }, 543 #if defined(__linux__) 544 { 545 .name = "drop-cache", 546 .type = QEMU_OPT_BOOL, 547 .help = "invalidate page cache during live migration (default: on)", 548 }, 549 #endif 550 { 551 .name = "x-check-cache-dropped", 552 .type = QEMU_OPT_BOOL, 553 .help = "check that page cache was dropped on live migration (default: off)" 554 }, 555 { /* end of list */ } 556 }, 557 }; 558 559 static const char *const mutable_opts[] = { "x-check-cache-dropped", NULL }; 560 561 static int raw_open_common(BlockDriverState *bs, QDict *options, 562 int bdrv_flags, int open_flags, 563 bool device, Error **errp) 564 { 565 BDRVRawState *s = bs->opaque; 566 QemuOpts *opts; 567 Error *local_err = NULL; 568 const char *filename = NULL; 569 const char *str; 570 BlockdevAioOptions aio, aio_default; 571 int fd, ret; 572 struct stat st; 573 OnOffAuto locking; 574 575 opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort); 576 if (!qemu_opts_absorb_qdict(opts, options, errp)) { 577 ret = -EINVAL; 578 goto fail; 579 } 580 581 filename = qemu_opt_get(opts, "filename"); 582 583 ret = raw_normalize_devicepath(&filename, errp); 584 if (ret != 0) { 585 goto fail; 586 } 587 588 if (bdrv_flags & BDRV_O_NATIVE_AIO) { 589 aio_default = BLOCKDEV_AIO_OPTIONS_NATIVE; 590 #ifdef CONFIG_LINUX_IO_URING 591 } else if (bdrv_flags & BDRV_O_IO_URING) { 592 aio_default = BLOCKDEV_AIO_OPTIONS_IO_URING; 593 #endif 594 } else { 595 aio_default = BLOCKDEV_AIO_OPTIONS_THREADS; 596 } 597 598 aio = qapi_enum_parse(&BlockdevAioOptions_lookup, 599 qemu_opt_get(opts, "aio"), 600 aio_default, &local_err); 601 if (local_err) { 602 error_propagate(errp, local_err); 603 ret = -EINVAL; 604 goto fail; 605 } 606 607 s->use_linux_aio = (aio == BLOCKDEV_AIO_OPTIONS_NATIVE); 608 #ifdef CONFIG_LINUX_IO_URING 609 s->use_linux_io_uring = (aio == BLOCKDEV_AIO_OPTIONS_IO_URING); 610 #endif 611 612 locking = qapi_enum_parse(&OnOffAuto_lookup, 613 qemu_opt_get(opts, "locking"), 614 ON_OFF_AUTO_AUTO, &local_err); 615 if (local_err) { 616 error_propagate(errp, local_err); 617 ret = -EINVAL; 618 goto fail; 619 } 620 switch (locking) { 621 case ON_OFF_AUTO_ON: 622 s->use_lock = true; 623 if (!qemu_has_ofd_lock()) { 624 warn_report("File lock requested but OFD locking syscall is " 625 "unavailable, falling back to POSIX file locks"); 626 error_printf("Due to the implementation, locks can be lost " 627 "unexpectedly.\n"); 628 } 629 break; 630 case ON_OFF_AUTO_OFF: 631 s->use_lock = false; 632 break; 633 case ON_OFF_AUTO_AUTO: 634 s->use_lock = qemu_has_ofd_lock(); 635 break; 636 default: 637 abort(); 638 } 639 640 str = qemu_opt_get(opts, "pr-manager"); 641 if (str) { 642 s->pr_mgr = pr_manager_lookup(str, &local_err); 643 if (local_err) { 644 error_propagate(errp, local_err); 645 ret = -EINVAL; 646 goto fail; 647 } 648 } 649 650 s->drop_cache = qemu_opt_get_bool(opts, "drop-cache", true); 651 s->check_cache_dropped = qemu_opt_get_bool(opts, "x-check-cache-dropped", 652 false); 653 654 s->open_flags = open_flags; 655 raw_parse_flags(bdrv_flags, &s->open_flags, false); 656 657 s->fd = -1; 658 fd = qemu_open(filename, s->open_flags, errp); 659 ret = fd < 0 ? -errno : 0; 660 661 if (ret < 0) { 662 if (ret == -EROFS) { 663 ret = -EACCES; 664 } 665 goto fail; 666 } 667 s->fd = fd; 668 669 /* Check s->open_flags rather than bdrv_flags due to auto-read-only */ 670 if (s->open_flags & O_RDWR) { 671 ret = check_hdev_writable(s->fd); 672 if (ret < 0) { 673 error_setg_errno(errp, -ret, "The device is not writable"); 674 goto fail; 675 } 676 } 677 678 s->perm = 0; 679 s->shared_perm = BLK_PERM_ALL; 680 681 #ifdef CONFIG_LINUX_AIO 682 /* Currently Linux does AIO only for files opened with O_DIRECT */ 683 if (s->use_linux_aio) { 684 if (!(s->open_flags & O_DIRECT)) { 685 error_setg(errp, "aio=native was specified, but it requires " 686 "cache.direct=on, which was not specified."); 687 ret = -EINVAL; 688 goto fail; 689 } 690 if (!aio_setup_linux_aio(bdrv_get_aio_context(bs), errp)) { 691 error_prepend(errp, "Unable to use native AIO: "); 692 goto fail; 693 } 694 } 695 #else 696 if (s->use_linux_aio) { 697 error_setg(errp, "aio=native was specified, but is not supported " 698 "in this build."); 699 ret = -EINVAL; 700 goto fail; 701 } 702 #endif /* !defined(CONFIG_LINUX_AIO) */ 703 704 #ifdef CONFIG_LINUX_IO_URING 705 if (s->use_linux_io_uring) { 706 if (!aio_setup_linux_io_uring(bdrv_get_aio_context(bs), errp)) { 707 error_prepend(errp, "Unable to use io_uring: "); 708 goto fail; 709 } 710 } 711 #else 712 if (s->use_linux_io_uring) { 713 error_setg(errp, "aio=io_uring was specified, but is not supported " 714 "in this build."); 715 ret = -EINVAL; 716 goto fail; 717 } 718 #endif /* !defined(CONFIG_LINUX_IO_URING) */ 719 720 s->has_discard = true; 721 s->has_write_zeroes = true; 722 if ((bs->open_flags & BDRV_O_NOCACHE) != 0 && !dio_byte_aligned(s->fd)) { 723 s->needs_alignment = true; 724 } 725 726 if (fstat(s->fd, &st) < 0) { 727 ret = -errno; 728 error_setg_errno(errp, errno, "Could not stat file"); 729 goto fail; 730 } 731 732 if (!device) { 733 if (!S_ISREG(st.st_mode)) { 734 error_setg(errp, "'%s' driver requires '%s' to be a regular file", 735 bs->drv->format_name, bs->filename); 736 ret = -EINVAL; 737 goto fail; 738 } else { 739 s->discard_zeroes = true; 740 s->has_fallocate = true; 741 } 742 } else { 743 if (!(S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode))) { 744 error_setg(errp, "'%s' driver requires '%s' to be either " 745 "a character or block device", 746 bs->drv->format_name, bs->filename); 747 ret = -EINVAL; 748 goto fail; 749 } 750 } 751 752 if (S_ISBLK(st.st_mode)) { 753 #ifdef BLKDISCARDZEROES 754 unsigned int arg; 755 if (ioctl(s->fd, BLKDISCARDZEROES, &arg) == 0 && arg) { 756 s->discard_zeroes = true; 757 } 758 #endif 759 #ifdef __linux__ 760 /* On Linux 3.10, BLKDISCARD leaves stale data in the page cache. Do 761 * not rely on the contents of discarded blocks unless using O_DIRECT. 762 * Same for BLKZEROOUT. 763 */ 764 if (!(bs->open_flags & BDRV_O_NOCACHE)) { 765 s->discard_zeroes = false; 766 s->has_write_zeroes = false; 767 } 768 #endif 769 } 770 #ifdef __FreeBSD__ 771 if (S_ISCHR(st.st_mode)) { 772 /* 773 * The file is a char device (disk), which on FreeBSD isn't behind 774 * a pager, so force all requests to be aligned. This is needed 775 * so QEMU makes sure all IO operations on the device are aligned 776 * to sector size, or else FreeBSD will reject them with EINVAL. 777 */ 778 s->needs_alignment = true; 779 } 780 #endif 781 782 #ifdef CONFIG_XFS 783 if (platform_test_xfs_fd(s->fd)) { 784 s->is_xfs = true; 785 } 786 #endif 787 788 bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK; 789 if (S_ISREG(st.st_mode)) { 790 /* When extending regular files, we get zeros from the OS */ 791 bs->supported_truncate_flags = BDRV_REQ_ZERO_WRITE; 792 } 793 ret = 0; 794 fail: 795 if (ret < 0 && s->fd != -1) { 796 qemu_close(s->fd); 797 } 798 if (filename && (bdrv_flags & BDRV_O_TEMPORARY)) { 799 unlink(filename); 800 } 801 qemu_opts_del(opts); 802 return ret; 803 } 804 805 static int raw_open(BlockDriverState *bs, QDict *options, int flags, 806 Error **errp) 807 { 808 BDRVRawState *s = bs->opaque; 809 810 s->type = FTYPE_FILE; 811 return raw_open_common(bs, options, flags, 0, false, errp); 812 } 813 814 typedef enum { 815 RAW_PL_PREPARE, 816 RAW_PL_COMMIT, 817 RAW_PL_ABORT, 818 } RawPermLockOp; 819 820 #define PERM_FOREACH(i) \ 821 for ((i) = 0; (1ULL << (i)) <= BLK_PERM_ALL; i++) 822 823 /* Lock bytes indicated by @perm_lock_bits and @shared_perm_lock_bits in the 824 * file; if @unlock == true, also unlock the unneeded bytes. 825 * @shared_perm_lock_bits is the mask of all permissions that are NOT shared. 826 */ 827 static int raw_apply_lock_bytes(BDRVRawState *s, int fd, 828 uint64_t perm_lock_bits, 829 uint64_t shared_perm_lock_bits, 830 bool unlock, Error **errp) 831 { 832 int ret; 833 int i; 834 uint64_t locked_perm, locked_shared_perm; 835 836 if (s) { 837 locked_perm = s->locked_perm; 838 locked_shared_perm = s->locked_shared_perm; 839 } else { 840 /* 841 * We don't have the previous bits, just lock/unlock for each of the 842 * requested bits. 843 */ 844 if (unlock) { 845 locked_perm = BLK_PERM_ALL; 846 locked_shared_perm = BLK_PERM_ALL; 847 } else { 848 locked_perm = 0; 849 locked_shared_perm = 0; 850 } 851 } 852 853 PERM_FOREACH(i) { 854 int off = RAW_LOCK_PERM_BASE + i; 855 uint64_t bit = (1ULL << i); 856 if ((perm_lock_bits & bit) && !(locked_perm & bit)) { 857 ret = qemu_lock_fd(fd, off, 1, false); 858 if (ret) { 859 raw_lock_error_setg_errno(errp, -ret, "Failed to lock byte %d", 860 off); 861 return ret; 862 } else if (s) { 863 s->locked_perm |= bit; 864 } 865 } else if (unlock && (locked_perm & bit) && !(perm_lock_bits & bit)) { 866 ret = qemu_unlock_fd(fd, off, 1); 867 if (ret) { 868 error_setg_errno(errp, -ret, "Failed to unlock byte %d", off); 869 return ret; 870 } else if (s) { 871 s->locked_perm &= ~bit; 872 } 873 } 874 } 875 PERM_FOREACH(i) { 876 int off = RAW_LOCK_SHARED_BASE + i; 877 uint64_t bit = (1ULL << i); 878 if ((shared_perm_lock_bits & bit) && !(locked_shared_perm & bit)) { 879 ret = qemu_lock_fd(fd, off, 1, false); 880 if (ret) { 881 raw_lock_error_setg_errno(errp, -ret, "Failed to lock byte %d", 882 off); 883 return ret; 884 } else if (s) { 885 s->locked_shared_perm |= bit; 886 } 887 } else if (unlock && (locked_shared_perm & bit) && 888 !(shared_perm_lock_bits & bit)) { 889 ret = qemu_unlock_fd(fd, off, 1); 890 if (ret) { 891 error_setg_errno(errp, -ret, "Failed to unlock byte %d", off); 892 return ret; 893 } else if (s) { 894 s->locked_shared_perm &= ~bit; 895 } 896 } 897 } 898 return 0; 899 } 900 901 /* Check "unshared" bytes implied by @perm and ~@shared_perm in the file. */ 902 static int raw_check_lock_bytes(int fd, uint64_t perm, uint64_t shared_perm, 903 Error **errp) 904 { 905 int ret; 906 int i; 907 908 PERM_FOREACH(i) { 909 int off = RAW_LOCK_SHARED_BASE + i; 910 uint64_t p = 1ULL << i; 911 if (perm & p) { 912 ret = qemu_lock_fd_test(fd, off, 1, true); 913 if (ret) { 914 char *perm_name = bdrv_perm_names(p); 915 916 raw_lock_error_setg_errno(errp, -ret, 917 "Failed to get \"%s\" lock", 918 perm_name); 919 g_free(perm_name); 920 return ret; 921 } 922 } 923 } 924 PERM_FOREACH(i) { 925 int off = RAW_LOCK_PERM_BASE + i; 926 uint64_t p = 1ULL << i; 927 if (!(shared_perm & p)) { 928 ret = qemu_lock_fd_test(fd, off, 1, true); 929 if (ret) { 930 char *perm_name = bdrv_perm_names(p); 931 932 raw_lock_error_setg_errno(errp, -ret, 933 "Failed to get shared \"%s\" lock", 934 perm_name); 935 g_free(perm_name); 936 return ret; 937 } 938 } 939 } 940 return 0; 941 } 942 943 static int raw_handle_perm_lock(BlockDriverState *bs, 944 RawPermLockOp op, 945 uint64_t new_perm, uint64_t new_shared, 946 Error **errp) 947 { 948 BDRVRawState *s = bs->opaque; 949 int ret = 0; 950 Error *local_err = NULL; 951 952 if (!s->use_lock) { 953 return 0; 954 } 955 956 if (bdrv_get_flags(bs) & BDRV_O_INACTIVE) { 957 return 0; 958 } 959 960 switch (op) { 961 case RAW_PL_PREPARE: 962 if ((s->perm | new_perm) == s->perm && 963 (s->shared_perm & new_shared) == s->shared_perm) 964 { 965 /* 966 * We are going to unlock bytes, it should not fail. If it fail due 967 * to some fs-dependent permission-unrelated reasons (which occurs 968 * sometimes on NFS and leads to abort in bdrv_replace_child) we 969 * can't prevent such errors by any check here. And we ignore them 970 * anyway in ABORT and COMMIT. 971 */ 972 return 0; 973 } 974 ret = raw_apply_lock_bytes(s, s->fd, s->perm | new_perm, 975 ~s->shared_perm | ~new_shared, 976 false, errp); 977 if (!ret) { 978 ret = raw_check_lock_bytes(s->fd, new_perm, new_shared, errp); 979 if (!ret) { 980 return 0; 981 } 982 error_append_hint(errp, 983 "Is another process using the image [%s]?\n", 984 bs->filename); 985 } 986 /* fall through to unlock bytes. */ 987 case RAW_PL_ABORT: 988 raw_apply_lock_bytes(s, s->fd, s->perm, ~s->shared_perm, 989 true, &local_err); 990 if (local_err) { 991 /* Theoretically the above call only unlocks bytes and it cannot 992 * fail. Something weird happened, report it. 993 */ 994 warn_report_err(local_err); 995 } 996 break; 997 case RAW_PL_COMMIT: 998 raw_apply_lock_bytes(s, s->fd, new_perm, ~new_shared, 999 true, &local_err); 1000 if (local_err) { 1001 /* Theoretically the above call only unlocks bytes and it cannot 1002 * fail. Something weird happened, report it. 1003 */ 1004 warn_report_err(local_err); 1005 } 1006 break; 1007 } 1008 return ret; 1009 } 1010 1011 static int raw_reconfigure_getfd(BlockDriverState *bs, int flags, 1012 int *open_flags, uint64_t perm, bool force_dup, 1013 Error **errp) 1014 { 1015 BDRVRawState *s = bs->opaque; 1016 int fd = -1; 1017 int ret; 1018 bool has_writers = perm & 1019 (BLK_PERM_WRITE | BLK_PERM_WRITE_UNCHANGED | BLK_PERM_RESIZE); 1020 int fcntl_flags = O_APPEND | O_NONBLOCK; 1021 #ifdef O_NOATIME 1022 fcntl_flags |= O_NOATIME; 1023 #endif 1024 1025 *open_flags = 0; 1026 if (s->type == FTYPE_CD) { 1027 *open_flags |= O_NONBLOCK; 1028 } 1029 1030 raw_parse_flags(flags, open_flags, has_writers); 1031 1032 #ifdef O_ASYNC 1033 /* Not all operating systems have O_ASYNC, and those that don't 1034 * will not let us track the state into rs->open_flags (typically 1035 * you achieve the same effect with an ioctl, for example I_SETSIG 1036 * on Solaris). But we do not use O_ASYNC, so that's fine. 1037 */ 1038 assert((s->open_flags & O_ASYNC) == 0); 1039 #endif 1040 1041 if (!force_dup && *open_flags == s->open_flags) { 1042 /* We're lucky, the existing fd is fine */ 1043 return s->fd; 1044 } 1045 1046 if ((*open_flags & ~fcntl_flags) == (s->open_flags & ~fcntl_flags)) { 1047 /* dup the original fd */ 1048 fd = qemu_dup(s->fd); 1049 if (fd >= 0) { 1050 ret = fcntl_setfl(fd, *open_flags); 1051 if (ret) { 1052 qemu_close(fd); 1053 fd = -1; 1054 } 1055 } 1056 } 1057 1058 /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */ 1059 if (fd == -1) { 1060 const char *normalized_filename = bs->filename; 1061 ret = raw_normalize_devicepath(&normalized_filename, errp); 1062 if (ret >= 0) { 1063 fd = qemu_open(normalized_filename, *open_flags, errp); 1064 if (fd == -1) { 1065 return -1; 1066 } 1067 } 1068 } 1069 1070 if (fd != -1 && (*open_flags & O_RDWR)) { 1071 ret = check_hdev_writable(fd); 1072 if (ret < 0) { 1073 qemu_close(fd); 1074 error_setg_errno(errp, -ret, "The device is not writable"); 1075 return -1; 1076 } 1077 } 1078 1079 return fd; 1080 } 1081 1082 static int raw_reopen_prepare(BDRVReopenState *state, 1083 BlockReopenQueue *queue, Error **errp) 1084 { 1085 BDRVRawState *s; 1086 BDRVRawReopenState *rs; 1087 QemuOpts *opts; 1088 int ret; 1089 1090 assert(state != NULL); 1091 assert(state->bs != NULL); 1092 1093 s = state->bs->opaque; 1094 1095 state->opaque = g_new0(BDRVRawReopenState, 1); 1096 rs = state->opaque; 1097 1098 /* Handle options changes */ 1099 opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort); 1100 if (!qemu_opts_absorb_qdict(opts, state->options, errp)) { 1101 ret = -EINVAL; 1102 goto out; 1103 } 1104 1105 rs->drop_cache = qemu_opt_get_bool_del(opts, "drop-cache", true); 1106 rs->check_cache_dropped = 1107 qemu_opt_get_bool_del(opts, "x-check-cache-dropped", false); 1108 1109 /* This driver's reopen function doesn't currently allow changing 1110 * other options, so let's put them back in the original QDict and 1111 * bdrv_reopen_prepare() will detect changes and complain. */ 1112 qemu_opts_to_qdict(opts, state->options); 1113 1114 /* 1115 * As part of reopen prepare we also want to create new fd by 1116 * raw_reconfigure_getfd(). But it wants updated "perm", when in 1117 * bdrv_reopen_multiple() .bdrv_reopen_prepare() callback called prior to 1118 * permission update. Happily, permission update is always a part (a seprate 1119 * stage) of bdrv_reopen_multiple() so we can rely on this fact and 1120 * reconfigure fd in raw_check_perm(). 1121 */ 1122 1123 s->reopen_state = state; 1124 ret = 0; 1125 1126 out: 1127 qemu_opts_del(opts); 1128 return ret; 1129 } 1130 1131 static void raw_reopen_commit(BDRVReopenState *state) 1132 { 1133 BDRVRawReopenState *rs = state->opaque; 1134 BDRVRawState *s = state->bs->opaque; 1135 1136 s->drop_cache = rs->drop_cache; 1137 s->check_cache_dropped = rs->check_cache_dropped; 1138 s->open_flags = rs->open_flags; 1139 g_free(state->opaque); 1140 state->opaque = NULL; 1141 1142 assert(s->reopen_state == state); 1143 s->reopen_state = NULL; 1144 } 1145 1146 1147 static void raw_reopen_abort(BDRVReopenState *state) 1148 { 1149 BDRVRawReopenState *rs = state->opaque; 1150 BDRVRawState *s = state->bs->opaque; 1151 1152 /* nothing to do if NULL, we didn't get far enough */ 1153 if (rs == NULL) { 1154 return; 1155 } 1156 1157 g_free(state->opaque); 1158 state->opaque = NULL; 1159 1160 assert(s->reopen_state == state); 1161 s->reopen_state = NULL; 1162 } 1163 1164 static int hdev_get_max_hw_transfer(int fd, struct stat *st) 1165 { 1166 #ifdef BLKSECTGET 1167 if (S_ISBLK(st->st_mode)) { 1168 unsigned short max_sectors = 0; 1169 if (ioctl(fd, BLKSECTGET, &max_sectors) == 0) { 1170 return max_sectors * 512; 1171 } 1172 } else { 1173 int max_bytes = 0; 1174 if (ioctl(fd, BLKSECTGET, &max_bytes) == 0) { 1175 return max_bytes; 1176 } 1177 } 1178 return -errno; 1179 #else 1180 return -ENOSYS; 1181 #endif 1182 } 1183 1184 static int hdev_get_max_segments(int fd, struct stat *st) 1185 { 1186 #ifdef CONFIG_LINUX 1187 char buf[32]; 1188 const char *end; 1189 char *sysfspath = NULL; 1190 int ret; 1191 int sysfd = -1; 1192 long max_segments; 1193 1194 if (S_ISCHR(st->st_mode)) { 1195 if (ioctl(fd, SG_GET_SG_TABLESIZE, &ret) == 0) { 1196 return ret; 1197 } 1198 return -ENOTSUP; 1199 } 1200 1201 if (!S_ISBLK(st->st_mode)) { 1202 return -ENOTSUP; 1203 } 1204 1205 sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/max_segments", 1206 major(st->st_rdev), minor(st->st_rdev)); 1207 sysfd = open(sysfspath, O_RDONLY); 1208 if (sysfd == -1) { 1209 ret = -errno; 1210 goto out; 1211 } 1212 do { 1213 ret = read(sysfd, buf, sizeof(buf) - 1); 1214 } while (ret == -1 && errno == EINTR); 1215 if (ret < 0) { 1216 ret = -errno; 1217 goto out; 1218 } else if (ret == 0) { 1219 ret = -EIO; 1220 goto out; 1221 } 1222 buf[ret] = 0; 1223 /* The file is ended with '\n', pass 'end' to accept that. */ 1224 ret = qemu_strtol(buf, &end, 10, &max_segments); 1225 if (ret == 0 && end && *end == '\n') { 1226 ret = max_segments; 1227 } 1228 1229 out: 1230 if (sysfd != -1) { 1231 close(sysfd); 1232 } 1233 g_free(sysfspath); 1234 return ret; 1235 #else 1236 return -ENOTSUP; 1237 #endif 1238 } 1239 1240 static void raw_refresh_limits(BlockDriverState *bs, Error **errp) 1241 { 1242 BDRVRawState *s = bs->opaque; 1243 struct stat st; 1244 1245 raw_probe_alignment(bs, s->fd, errp); 1246 bs->bl.min_mem_alignment = s->buf_align; 1247 bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size); 1248 1249 /* 1250 * Maximum transfers are best effort, so it is okay to ignore any 1251 * errors. That said, based on the man page errors in fstat would be 1252 * very much unexpected; the only possible case seems to be ENOMEM. 1253 */ 1254 if (fstat(s->fd, &st)) { 1255 return; 1256 } 1257 1258 #if defined(__APPLE__) && (__MACH__) 1259 struct statfs buf; 1260 1261 if (!fstatfs(s->fd, &buf)) { 1262 bs->bl.opt_transfer = buf.f_iosize; 1263 bs->bl.pdiscard_alignment = buf.f_bsize; 1264 } 1265 #endif 1266 1267 if (bs->sg || S_ISBLK(st.st_mode)) { 1268 int ret = hdev_get_max_hw_transfer(s->fd, &st); 1269 1270 if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) { 1271 bs->bl.max_hw_transfer = ret; 1272 } 1273 1274 ret = hdev_get_max_segments(s->fd, &st); 1275 if (ret > 0) { 1276 bs->bl.max_iov = ret; 1277 } 1278 } 1279 } 1280 1281 static int check_for_dasd(int fd) 1282 { 1283 #ifdef BIODASDINFO2 1284 struct dasd_information2_t info = {0}; 1285 1286 return ioctl(fd, BIODASDINFO2, &info); 1287 #else 1288 return -1; 1289 #endif 1290 } 1291 1292 /** 1293 * Try to get @bs's logical and physical block size. 1294 * On success, store them in @bsz and return zero. 1295 * On failure, return negative errno. 1296 */ 1297 static int hdev_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz) 1298 { 1299 BDRVRawState *s = bs->opaque; 1300 int ret; 1301 1302 /* If DASD, get blocksizes */ 1303 if (check_for_dasd(s->fd) < 0) { 1304 return -ENOTSUP; 1305 } 1306 ret = probe_logical_blocksize(s->fd, &bsz->log); 1307 if (ret < 0) { 1308 return ret; 1309 } 1310 return probe_physical_blocksize(s->fd, &bsz->phys); 1311 } 1312 1313 /** 1314 * Try to get @bs's geometry: cyls, heads, sectors. 1315 * On success, store them in @geo and return 0. 1316 * On failure return -errno. 1317 * (Allows block driver to assign default geometry values that guest sees) 1318 */ 1319 #ifdef __linux__ 1320 static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo) 1321 { 1322 BDRVRawState *s = bs->opaque; 1323 struct hd_geometry ioctl_geo = {0}; 1324 1325 /* If DASD, get its geometry */ 1326 if (check_for_dasd(s->fd) < 0) { 1327 return -ENOTSUP; 1328 } 1329 if (ioctl(s->fd, HDIO_GETGEO, &ioctl_geo) < 0) { 1330 return -errno; 1331 } 1332 /* HDIO_GETGEO may return success even though geo contains zeros 1333 (e.g. certain multipath setups) */ 1334 if (!ioctl_geo.heads || !ioctl_geo.sectors || !ioctl_geo.cylinders) { 1335 return -ENOTSUP; 1336 } 1337 /* Do not return a geometry for partition */ 1338 if (ioctl_geo.start != 0) { 1339 return -ENOTSUP; 1340 } 1341 geo->heads = ioctl_geo.heads; 1342 geo->sectors = ioctl_geo.sectors; 1343 geo->cylinders = ioctl_geo.cylinders; 1344 1345 return 0; 1346 } 1347 #else /* __linux__ */ 1348 static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo) 1349 { 1350 return -ENOTSUP; 1351 } 1352 #endif 1353 1354 #if defined(__linux__) 1355 static int handle_aiocb_ioctl(void *opaque) 1356 { 1357 RawPosixAIOData *aiocb = opaque; 1358 int ret; 1359 1360 do { 1361 ret = ioctl(aiocb->aio_fildes, aiocb->ioctl.cmd, aiocb->ioctl.buf); 1362 } while (ret == -1 && errno == EINTR); 1363 if (ret == -1) { 1364 return -errno; 1365 } 1366 1367 return 0; 1368 } 1369 #endif /* linux */ 1370 1371 static int handle_aiocb_flush(void *opaque) 1372 { 1373 RawPosixAIOData *aiocb = opaque; 1374 BDRVRawState *s = aiocb->bs->opaque; 1375 int ret; 1376 1377 if (s->page_cache_inconsistent) { 1378 return -s->page_cache_inconsistent; 1379 } 1380 1381 ret = qemu_fdatasync(aiocb->aio_fildes); 1382 if (ret == -1) { 1383 trace_file_flush_fdatasync_failed(errno); 1384 1385 /* There is no clear definition of the semantics of a failing fsync(), 1386 * so we may have to assume the worst. The sad truth is that this 1387 * assumption is correct for Linux. Some pages are now probably marked 1388 * clean in the page cache even though they are inconsistent with the 1389 * on-disk contents. The next fdatasync() call would succeed, but no 1390 * further writeback attempt will be made. We can't get back to a state 1391 * in which we know what is on disk (we would have to rewrite 1392 * everything that was touched since the last fdatasync() at least), so 1393 * make bdrv_flush() fail permanently. Given that the behaviour isn't 1394 * really defined, I have little hope that other OSes are doing better. 1395 * 1396 * Obviously, this doesn't affect O_DIRECT, which bypasses the page 1397 * cache. */ 1398 if ((s->open_flags & O_DIRECT) == 0) { 1399 s->page_cache_inconsistent = errno; 1400 } 1401 return -errno; 1402 } 1403 return 0; 1404 } 1405 1406 #ifdef CONFIG_PREADV 1407 1408 static bool preadv_present = true; 1409 1410 static ssize_t 1411 qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset) 1412 { 1413 return preadv(fd, iov, nr_iov, offset); 1414 } 1415 1416 static ssize_t 1417 qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset) 1418 { 1419 return pwritev(fd, iov, nr_iov, offset); 1420 } 1421 1422 #else 1423 1424 static bool preadv_present = false; 1425 1426 static ssize_t 1427 qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset) 1428 { 1429 return -ENOSYS; 1430 } 1431 1432 static ssize_t 1433 qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset) 1434 { 1435 return -ENOSYS; 1436 } 1437 1438 #endif 1439 1440 static ssize_t handle_aiocb_rw_vector(RawPosixAIOData *aiocb) 1441 { 1442 ssize_t len; 1443 1444 do { 1445 if (aiocb->aio_type & QEMU_AIO_WRITE) 1446 len = qemu_pwritev(aiocb->aio_fildes, 1447 aiocb->io.iov, 1448 aiocb->io.niov, 1449 aiocb->aio_offset); 1450 else 1451 len = qemu_preadv(aiocb->aio_fildes, 1452 aiocb->io.iov, 1453 aiocb->io.niov, 1454 aiocb->aio_offset); 1455 } while (len == -1 && errno == EINTR); 1456 1457 if (len == -1) { 1458 return -errno; 1459 } 1460 return len; 1461 } 1462 1463 /* 1464 * Read/writes the data to/from a given linear buffer. 1465 * 1466 * Returns the number of bytes handles or -errno in case of an error. Short 1467 * reads are only returned if the end of the file is reached. 1468 */ 1469 static ssize_t handle_aiocb_rw_linear(RawPosixAIOData *aiocb, char *buf) 1470 { 1471 ssize_t offset = 0; 1472 ssize_t len; 1473 1474 while (offset < aiocb->aio_nbytes) { 1475 if (aiocb->aio_type & QEMU_AIO_WRITE) { 1476 len = pwrite(aiocb->aio_fildes, 1477 (const char *)buf + offset, 1478 aiocb->aio_nbytes - offset, 1479 aiocb->aio_offset + offset); 1480 } else { 1481 len = pread(aiocb->aio_fildes, 1482 buf + offset, 1483 aiocb->aio_nbytes - offset, 1484 aiocb->aio_offset + offset); 1485 } 1486 if (len == -1 && errno == EINTR) { 1487 continue; 1488 } else if (len == -1 && errno == EINVAL && 1489 (aiocb->bs->open_flags & BDRV_O_NOCACHE) && 1490 !(aiocb->aio_type & QEMU_AIO_WRITE) && 1491 offset > 0) { 1492 /* O_DIRECT pread() may fail with EINVAL when offset is unaligned 1493 * after a short read. Assume that O_DIRECT short reads only occur 1494 * at EOF. Therefore this is a short read, not an I/O error. 1495 */ 1496 break; 1497 } else if (len == -1) { 1498 offset = -errno; 1499 break; 1500 } else if (len == 0) { 1501 break; 1502 } 1503 offset += len; 1504 } 1505 1506 return offset; 1507 } 1508 1509 static int handle_aiocb_rw(void *opaque) 1510 { 1511 RawPosixAIOData *aiocb = opaque; 1512 ssize_t nbytes; 1513 char *buf; 1514 1515 if (!(aiocb->aio_type & QEMU_AIO_MISALIGNED)) { 1516 /* 1517 * If there is just a single buffer, and it is properly aligned 1518 * we can just use plain pread/pwrite without any problems. 1519 */ 1520 if (aiocb->io.niov == 1) { 1521 nbytes = handle_aiocb_rw_linear(aiocb, aiocb->io.iov->iov_base); 1522 goto out; 1523 } 1524 /* 1525 * We have more than one iovec, and all are properly aligned. 1526 * 1527 * Try preadv/pwritev first and fall back to linearizing the 1528 * buffer if it's not supported. 1529 */ 1530 if (preadv_present) { 1531 nbytes = handle_aiocb_rw_vector(aiocb); 1532 if (nbytes == aiocb->aio_nbytes || 1533 (nbytes < 0 && nbytes != -ENOSYS)) { 1534 goto out; 1535 } 1536 preadv_present = false; 1537 } 1538 1539 /* 1540 * XXX(hch): short read/write. no easy way to handle the reminder 1541 * using these interfaces. For now retry using plain 1542 * pread/pwrite? 1543 */ 1544 } 1545 1546 /* 1547 * Ok, we have to do it the hard way, copy all segments into 1548 * a single aligned buffer. 1549 */ 1550 buf = qemu_try_blockalign(aiocb->bs, aiocb->aio_nbytes); 1551 if (buf == NULL) { 1552 nbytes = -ENOMEM; 1553 goto out; 1554 } 1555 1556 if (aiocb->aio_type & QEMU_AIO_WRITE) { 1557 char *p = buf; 1558 int i; 1559 1560 for (i = 0; i < aiocb->io.niov; ++i) { 1561 memcpy(p, aiocb->io.iov[i].iov_base, aiocb->io.iov[i].iov_len); 1562 p += aiocb->io.iov[i].iov_len; 1563 } 1564 assert(p - buf == aiocb->aio_nbytes); 1565 } 1566 1567 nbytes = handle_aiocb_rw_linear(aiocb, buf); 1568 if (!(aiocb->aio_type & QEMU_AIO_WRITE)) { 1569 char *p = buf; 1570 size_t count = aiocb->aio_nbytes, copy; 1571 int i; 1572 1573 for (i = 0; i < aiocb->io.niov && count; ++i) { 1574 copy = count; 1575 if (copy > aiocb->io.iov[i].iov_len) { 1576 copy = aiocb->io.iov[i].iov_len; 1577 } 1578 memcpy(aiocb->io.iov[i].iov_base, p, copy); 1579 assert(count >= copy); 1580 p += copy; 1581 count -= copy; 1582 } 1583 assert(count == 0); 1584 } 1585 qemu_vfree(buf); 1586 1587 out: 1588 if (nbytes == aiocb->aio_nbytes) { 1589 return 0; 1590 } else if (nbytes >= 0 && nbytes < aiocb->aio_nbytes) { 1591 if (aiocb->aio_type & QEMU_AIO_WRITE) { 1592 return -EINVAL; 1593 } else { 1594 iov_memset(aiocb->io.iov, aiocb->io.niov, nbytes, 1595 0, aiocb->aio_nbytes - nbytes); 1596 return 0; 1597 } 1598 } else { 1599 assert(nbytes < 0); 1600 return nbytes; 1601 } 1602 } 1603 1604 #if defined(CONFIG_FALLOCATE) || defined(BLKZEROOUT) || defined(BLKDISCARD) 1605 static int translate_err(int err) 1606 { 1607 if (err == -ENODEV || err == -ENOSYS || err == -EOPNOTSUPP || 1608 err == -ENOTTY) { 1609 err = -ENOTSUP; 1610 } 1611 return err; 1612 } 1613 #endif 1614 1615 #ifdef CONFIG_FALLOCATE 1616 static int do_fallocate(int fd, int mode, off_t offset, off_t len) 1617 { 1618 do { 1619 if (fallocate(fd, mode, offset, len) == 0) { 1620 return 0; 1621 } 1622 } while (errno == EINTR); 1623 return translate_err(-errno); 1624 } 1625 #endif 1626 1627 static ssize_t handle_aiocb_write_zeroes_block(RawPosixAIOData *aiocb) 1628 { 1629 int ret = -ENOTSUP; 1630 BDRVRawState *s = aiocb->bs->opaque; 1631 1632 if (!s->has_write_zeroes) { 1633 return -ENOTSUP; 1634 } 1635 1636 #ifdef BLKZEROOUT 1637 /* The BLKZEROOUT implementation in the kernel doesn't set 1638 * BLKDEV_ZERO_NOFALLBACK, so we can't call this if we have to avoid slow 1639 * fallbacks. */ 1640 if (!(aiocb->aio_type & QEMU_AIO_NO_FALLBACK)) { 1641 do { 1642 uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes }; 1643 if (ioctl(aiocb->aio_fildes, BLKZEROOUT, range) == 0) { 1644 return 0; 1645 } 1646 } while (errno == EINTR); 1647 1648 ret = translate_err(-errno); 1649 if (ret == -ENOTSUP) { 1650 s->has_write_zeroes = false; 1651 } 1652 } 1653 #endif 1654 1655 return ret; 1656 } 1657 1658 static int handle_aiocb_write_zeroes(void *opaque) 1659 { 1660 RawPosixAIOData *aiocb = opaque; 1661 #ifdef CONFIG_FALLOCATE 1662 BDRVRawState *s = aiocb->bs->opaque; 1663 int64_t len; 1664 #endif 1665 1666 if (aiocb->aio_type & QEMU_AIO_BLKDEV) { 1667 return handle_aiocb_write_zeroes_block(aiocb); 1668 } 1669 1670 #ifdef CONFIG_FALLOCATE_ZERO_RANGE 1671 if (s->has_write_zeroes) { 1672 int ret = do_fallocate(s->fd, FALLOC_FL_ZERO_RANGE, 1673 aiocb->aio_offset, aiocb->aio_nbytes); 1674 if (ret == -ENOTSUP) { 1675 s->has_write_zeroes = false; 1676 } else if (ret == 0 || ret != -EINVAL) { 1677 return ret; 1678 } 1679 /* 1680 * Note: Some file systems do not like unaligned byte ranges, and 1681 * return EINVAL in such a case, though they should not do it according 1682 * to the man-page of fallocate(). Thus we simply ignore this return 1683 * value and try the other fallbacks instead. 1684 */ 1685 } 1686 #endif 1687 1688 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE 1689 if (s->has_discard && s->has_fallocate) { 1690 int ret = do_fallocate(s->fd, 1691 FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 1692 aiocb->aio_offset, aiocb->aio_nbytes); 1693 if (ret == 0) { 1694 ret = do_fallocate(s->fd, 0, aiocb->aio_offset, aiocb->aio_nbytes); 1695 if (ret == 0 || ret != -ENOTSUP) { 1696 return ret; 1697 } 1698 s->has_fallocate = false; 1699 } else if (ret == -EINVAL) { 1700 /* 1701 * Some file systems like older versions of GPFS do not like un- 1702 * aligned byte ranges, and return EINVAL in such a case, though 1703 * they should not do it according to the man-page of fallocate(). 1704 * Warn about the bad filesystem and try the final fallback instead. 1705 */ 1706 warn_report_once("Your file system is misbehaving: " 1707 "fallocate(FALLOC_FL_PUNCH_HOLE) returned EINVAL. " 1708 "Please report this bug to your file sytem " 1709 "vendor."); 1710 } else if (ret != -ENOTSUP) { 1711 return ret; 1712 } else { 1713 s->has_discard = false; 1714 } 1715 } 1716 #endif 1717 1718 #ifdef CONFIG_FALLOCATE 1719 /* Last resort: we are trying to extend the file with zeroed data. This 1720 * can be done via fallocate(fd, 0) */ 1721 len = bdrv_getlength(aiocb->bs); 1722 if (s->has_fallocate && len >= 0 && aiocb->aio_offset >= len) { 1723 int ret = do_fallocate(s->fd, 0, aiocb->aio_offset, aiocb->aio_nbytes); 1724 if (ret == 0 || ret != -ENOTSUP) { 1725 return ret; 1726 } 1727 s->has_fallocate = false; 1728 } 1729 #endif 1730 1731 return -ENOTSUP; 1732 } 1733 1734 static int handle_aiocb_write_zeroes_unmap(void *opaque) 1735 { 1736 RawPosixAIOData *aiocb = opaque; 1737 BDRVRawState *s G_GNUC_UNUSED = aiocb->bs->opaque; 1738 1739 /* First try to write zeros and unmap at the same time */ 1740 1741 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE 1742 int ret = do_fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 1743 aiocb->aio_offset, aiocb->aio_nbytes); 1744 switch (ret) { 1745 case -ENOTSUP: 1746 case -EINVAL: 1747 case -EBUSY: 1748 break; 1749 default: 1750 return ret; 1751 } 1752 #endif 1753 1754 /* If we couldn't manage to unmap while guaranteed that the area reads as 1755 * all-zero afterwards, just write zeroes without unmapping */ 1756 return handle_aiocb_write_zeroes(aiocb); 1757 } 1758 1759 #ifndef HAVE_COPY_FILE_RANGE 1760 static off_t copy_file_range(int in_fd, off_t *in_off, int out_fd, 1761 off_t *out_off, size_t len, unsigned int flags) 1762 { 1763 #ifdef __NR_copy_file_range 1764 return syscall(__NR_copy_file_range, in_fd, in_off, out_fd, 1765 out_off, len, flags); 1766 #else 1767 errno = ENOSYS; 1768 return -1; 1769 #endif 1770 } 1771 #endif 1772 1773 static int handle_aiocb_copy_range(void *opaque) 1774 { 1775 RawPosixAIOData *aiocb = opaque; 1776 uint64_t bytes = aiocb->aio_nbytes; 1777 off_t in_off = aiocb->aio_offset; 1778 off_t out_off = aiocb->copy_range.aio_offset2; 1779 1780 while (bytes) { 1781 ssize_t ret = copy_file_range(aiocb->aio_fildes, &in_off, 1782 aiocb->copy_range.aio_fd2, &out_off, 1783 bytes, 0); 1784 trace_file_copy_file_range(aiocb->bs, aiocb->aio_fildes, in_off, 1785 aiocb->copy_range.aio_fd2, out_off, bytes, 1786 0, ret); 1787 if (ret == 0) { 1788 /* No progress (e.g. when beyond EOF), let the caller fall back to 1789 * buffer I/O. */ 1790 return -ENOSPC; 1791 } 1792 if (ret < 0) { 1793 switch (errno) { 1794 case ENOSYS: 1795 return -ENOTSUP; 1796 case EINTR: 1797 continue; 1798 default: 1799 return -errno; 1800 } 1801 } 1802 bytes -= ret; 1803 } 1804 return 0; 1805 } 1806 1807 static int handle_aiocb_discard(void *opaque) 1808 { 1809 RawPosixAIOData *aiocb = opaque; 1810 int ret = -EOPNOTSUPP; 1811 BDRVRawState *s = aiocb->bs->opaque; 1812 1813 if (!s->has_discard) { 1814 return -ENOTSUP; 1815 } 1816 1817 if (aiocb->aio_type & QEMU_AIO_BLKDEV) { 1818 #ifdef BLKDISCARD 1819 do { 1820 uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes }; 1821 if (ioctl(aiocb->aio_fildes, BLKDISCARD, range) == 0) { 1822 return 0; 1823 } 1824 } while (errno == EINTR); 1825 1826 ret = translate_err(-errno); 1827 #endif 1828 } else { 1829 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE 1830 ret = do_fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 1831 aiocb->aio_offset, aiocb->aio_nbytes); 1832 ret = translate_err(-errno); 1833 #elif defined(__APPLE__) && (__MACH__) 1834 fpunchhole_t fpunchhole; 1835 fpunchhole.fp_flags = 0; 1836 fpunchhole.reserved = 0; 1837 fpunchhole.fp_offset = aiocb->aio_offset; 1838 fpunchhole.fp_length = aiocb->aio_nbytes; 1839 if (fcntl(s->fd, F_PUNCHHOLE, &fpunchhole) == -1) { 1840 ret = errno == ENODEV ? -ENOTSUP : -errno; 1841 } else { 1842 ret = 0; 1843 } 1844 #endif 1845 } 1846 1847 if (ret == -ENOTSUP) { 1848 s->has_discard = false; 1849 } 1850 return ret; 1851 } 1852 1853 /* 1854 * Help alignment probing by allocating the first block. 1855 * 1856 * When reading with direct I/O from unallocated area on Gluster backed by XFS, 1857 * reading succeeds regardless of request length. In this case we fallback to 1858 * safe alignment which is not optimal. Allocating the first block avoids this 1859 * fallback. 1860 * 1861 * fd may be opened with O_DIRECT, but we don't know the buffer alignment or 1862 * request alignment, so we use safe values. 1863 * 1864 * Returns: 0 on success, -errno on failure. Since this is an optimization, 1865 * caller may ignore failures. 1866 */ 1867 static int allocate_first_block(int fd, size_t max_size) 1868 { 1869 size_t write_size = (max_size < MAX_BLOCKSIZE) 1870 ? BDRV_SECTOR_SIZE 1871 : MAX_BLOCKSIZE; 1872 size_t max_align = MAX(MAX_BLOCKSIZE, qemu_real_host_page_size); 1873 void *buf; 1874 ssize_t n; 1875 int ret; 1876 1877 buf = qemu_memalign(max_align, write_size); 1878 memset(buf, 0, write_size); 1879 1880 do { 1881 n = pwrite(fd, buf, write_size, 0); 1882 } while (n == -1 && errno == EINTR); 1883 1884 ret = (n == -1) ? -errno : 0; 1885 1886 qemu_vfree(buf); 1887 return ret; 1888 } 1889 1890 static int handle_aiocb_truncate(void *opaque) 1891 { 1892 RawPosixAIOData *aiocb = opaque; 1893 int result = 0; 1894 int64_t current_length = 0; 1895 char *buf = NULL; 1896 struct stat st; 1897 int fd = aiocb->aio_fildes; 1898 int64_t offset = aiocb->aio_offset; 1899 PreallocMode prealloc = aiocb->truncate.prealloc; 1900 Error **errp = aiocb->truncate.errp; 1901 1902 if (fstat(fd, &st) < 0) { 1903 result = -errno; 1904 error_setg_errno(errp, -result, "Could not stat file"); 1905 return result; 1906 } 1907 1908 current_length = st.st_size; 1909 if (current_length > offset && prealloc != PREALLOC_MODE_OFF) { 1910 error_setg(errp, "Cannot use preallocation for shrinking files"); 1911 return -ENOTSUP; 1912 } 1913 1914 switch (prealloc) { 1915 #ifdef CONFIG_POSIX_FALLOCATE 1916 case PREALLOC_MODE_FALLOC: 1917 /* 1918 * Truncating before posix_fallocate() makes it about twice slower on 1919 * file systems that do not support fallocate(), trying to check if a 1920 * block is allocated before allocating it, so don't do that here. 1921 */ 1922 if (offset != current_length) { 1923 result = -posix_fallocate(fd, current_length, 1924 offset - current_length); 1925 if (result != 0) { 1926 /* posix_fallocate() doesn't set errno. */ 1927 error_setg_errno(errp, -result, 1928 "Could not preallocate new data"); 1929 } else if (current_length == 0) { 1930 /* 1931 * posix_fallocate() uses fallocate() if the filesystem 1932 * supports it, or fallback to manually writing zeroes. If 1933 * fallocate() was used, unaligned reads from the fallocated 1934 * area in raw_probe_alignment() will succeed, hence we need to 1935 * allocate the first block. 1936 * 1937 * Optimize future alignment probing; ignore failures. 1938 */ 1939 allocate_first_block(fd, offset); 1940 } 1941 } else { 1942 result = 0; 1943 } 1944 goto out; 1945 #endif 1946 case PREALLOC_MODE_FULL: 1947 { 1948 int64_t num = 0, left = offset - current_length; 1949 off_t seek_result; 1950 1951 /* 1952 * Knowing the final size from the beginning could allow the file 1953 * system driver to do less allocations and possibly avoid 1954 * fragmentation of the file. 1955 */ 1956 if (ftruncate(fd, offset) != 0) { 1957 result = -errno; 1958 error_setg_errno(errp, -result, "Could not resize file"); 1959 goto out; 1960 } 1961 1962 buf = g_malloc0(65536); 1963 1964 seek_result = lseek(fd, current_length, SEEK_SET); 1965 if (seek_result < 0) { 1966 result = -errno; 1967 error_setg_errno(errp, -result, 1968 "Failed to seek to the old end of file"); 1969 goto out; 1970 } 1971 1972 while (left > 0) { 1973 num = MIN(left, 65536); 1974 result = write(fd, buf, num); 1975 if (result < 0) { 1976 if (errno == EINTR) { 1977 continue; 1978 } 1979 result = -errno; 1980 error_setg_errno(errp, -result, 1981 "Could not write zeros for preallocation"); 1982 goto out; 1983 } 1984 left -= result; 1985 } 1986 if (result >= 0) { 1987 result = fsync(fd); 1988 if (result < 0) { 1989 result = -errno; 1990 error_setg_errno(errp, -result, 1991 "Could not flush file to disk"); 1992 goto out; 1993 } 1994 } 1995 goto out; 1996 } 1997 case PREALLOC_MODE_OFF: 1998 if (ftruncate(fd, offset) != 0) { 1999 result = -errno; 2000 error_setg_errno(errp, -result, "Could not resize file"); 2001 } else if (current_length == 0 && offset > current_length) { 2002 /* Optimize future alignment probing; ignore failures. */ 2003 allocate_first_block(fd, offset); 2004 } 2005 return result; 2006 default: 2007 result = -ENOTSUP; 2008 error_setg(errp, "Unsupported preallocation mode: %s", 2009 PreallocMode_str(prealloc)); 2010 return result; 2011 } 2012 2013 out: 2014 if (result < 0) { 2015 if (ftruncate(fd, current_length) < 0) { 2016 error_report("Failed to restore old file length: %s", 2017 strerror(errno)); 2018 } 2019 } 2020 2021 g_free(buf); 2022 return result; 2023 } 2024 2025 static int coroutine_fn raw_thread_pool_submit(BlockDriverState *bs, 2026 ThreadPoolFunc func, void *arg) 2027 { 2028 /* @bs can be NULL, bdrv_get_aio_context() returns the main context then */ 2029 ThreadPool *pool = aio_get_thread_pool(bdrv_get_aio_context(bs)); 2030 return thread_pool_submit_co(pool, func, arg); 2031 } 2032 2033 static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, 2034 uint64_t bytes, QEMUIOVector *qiov, int type) 2035 { 2036 BDRVRawState *s = bs->opaque; 2037 RawPosixAIOData acb; 2038 2039 if (fd_open(bs) < 0) 2040 return -EIO; 2041 2042 /* 2043 * When using O_DIRECT, the request must be aligned to be able to use 2044 * either libaio or io_uring interface. If not fail back to regular thread 2045 * pool read/write code which emulates this for us if we 2046 * set QEMU_AIO_MISALIGNED. 2047 */ 2048 if (s->needs_alignment && !bdrv_qiov_is_aligned(bs, qiov)) { 2049 type |= QEMU_AIO_MISALIGNED; 2050 #ifdef CONFIG_LINUX_IO_URING 2051 } else if (s->use_linux_io_uring) { 2052 LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); 2053 assert(qiov->size == bytes); 2054 return luring_co_submit(bs, aio, s->fd, offset, qiov, type); 2055 #endif 2056 #ifdef CONFIG_LINUX_AIO 2057 } else if (s->use_linux_aio) { 2058 LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); 2059 assert(qiov->size == bytes); 2060 return laio_co_submit(bs, aio, s->fd, offset, qiov, type); 2061 #endif 2062 } 2063 2064 acb = (RawPosixAIOData) { 2065 .bs = bs, 2066 .aio_fildes = s->fd, 2067 .aio_type = type, 2068 .aio_offset = offset, 2069 .aio_nbytes = bytes, 2070 .io = { 2071 .iov = qiov->iov, 2072 .niov = qiov->niov, 2073 }, 2074 }; 2075 2076 assert(qiov->size == bytes); 2077 return raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); 2078 } 2079 2080 static int coroutine_fn raw_co_preadv(BlockDriverState *bs, uint64_t offset, 2081 uint64_t bytes, QEMUIOVector *qiov, 2082 int flags) 2083 { 2084 return raw_co_prw(bs, offset, bytes, qiov, QEMU_AIO_READ); 2085 } 2086 2087 static int coroutine_fn raw_co_pwritev(BlockDriverState *bs, uint64_t offset, 2088 uint64_t bytes, QEMUIOVector *qiov, 2089 int flags) 2090 { 2091 assert(flags == 0); 2092 return raw_co_prw(bs, offset, bytes, qiov, QEMU_AIO_WRITE); 2093 } 2094 2095 static void raw_aio_plug(BlockDriverState *bs) 2096 { 2097 BDRVRawState __attribute__((unused)) *s = bs->opaque; 2098 #ifdef CONFIG_LINUX_AIO 2099 if (s->use_linux_aio) { 2100 LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); 2101 laio_io_plug(bs, aio); 2102 } 2103 #endif 2104 #ifdef CONFIG_LINUX_IO_URING 2105 if (s->use_linux_io_uring) { 2106 LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); 2107 luring_io_plug(bs, aio); 2108 } 2109 #endif 2110 } 2111 2112 static void raw_aio_unplug(BlockDriverState *bs) 2113 { 2114 BDRVRawState __attribute__((unused)) *s = bs->opaque; 2115 #ifdef CONFIG_LINUX_AIO 2116 if (s->use_linux_aio) { 2117 LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); 2118 laio_io_unplug(bs, aio); 2119 } 2120 #endif 2121 #ifdef CONFIG_LINUX_IO_URING 2122 if (s->use_linux_io_uring) { 2123 LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); 2124 luring_io_unplug(bs, aio); 2125 } 2126 #endif 2127 } 2128 2129 static int raw_co_flush_to_disk(BlockDriverState *bs) 2130 { 2131 BDRVRawState *s = bs->opaque; 2132 RawPosixAIOData acb; 2133 int ret; 2134 2135 ret = fd_open(bs); 2136 if (ret < 0) { 2137 return ret; 2138 } 2139 2140 acb = (RawPosixAIOData) { 2141 .bs = bs, 2142 .aio_fildes = s->fd, 2143 .aio_type = QEMU_AIO_FLUSH, 2144 }; 2145 2146 #ifdef CONFIG_LINUX_IO_URING 2147 if (s->use_linux_io_uring) { 2148 LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); 2149 return luring_co_submit(bs, aio, s->fd, 0, NULL, QEMU_AIO_FLUSH); 2150 } 2151 #endif 2152 return raw_thread_pool_submit(bs, handle_aiocb_flush, &acb); 2153 } 2154 2155 static void raw_aio_attach_aio_context(BlockDriverState *bs, 2156 AioContext *new_context) 2157 { 2158 BDRVRawState __attribute__((unused)) *s = bs->opaque; 2159 #ifdef CONFIG_LINUX_AIO 2160 if (s->use_linux_aio) { 2161 Error *local_err = NULL; 2162 if (!aio_setup_linux_aio(new_context, &local_err)) { 2163 error_reportf_err(local_err, "Unable to use native AIO, " 2164 "falling back to thread pool: "); 2165 s->use_linux_aio = false; 2166 } 2167 } 2168 #endif 2169 #ifdef CONFIG_LINUX_IO_URING 2170 if (s->use_linux_io_uring) { 2171 Error *local_err = NULL; 2172 if (!aio_setup_linux_io_uring(new_context, &local_err)) { 2173 error_reportf_err(local_err, "Unable to use linux io_uring, " 2174 "falling back to thread pool: "); 2175 s->use_linux_io_uring = false; 2176 } 2177 } 2178 #endif 2179 } 2180 2181 static void raw_close(BlockDriverState *bs) 2182 { 2183 BDRVRawState *s = bs->opaque; 2184 2185 if (s->fd >= 0) { 2186 qemu_close(s->fd); 2187 s->fd = -1; 2188 } 2189 } 2190 2191 /** 2192 * Truncates the given regular file @fd to @offset and, when growing, fills the 2193 * new space according to @prealloc. 2194 * 2195 * Returns: 0 on success, -errno on failure. 2196 */ 2197 static int coroutine_fn 2198 raw_regular_truncate(BlockDriverState *bs, int fd, int64_t offset, 2199 PreallocMode prealloc, Error **errp) 2200 { 2201 RawPosixAIOData acb; 2202 2203 acb = (RawPosixAIOData) { 2204 .bs = bs, 2205 .aio_fildes = fd, 2206 .aio_type = QEMU_AIO_TRUNCATE, 2207 .aio_offset = offset, 2208 .truncate = { 2209 .prealloc = prealloc, 2210 .errp = errp, 2211 }, 2212 }; 2213 2214 return raw_thread_pool_submit(bs, handle_aiocb_truncate, &acb); 2215 } 2216 2217 static int coroutine_fn raw_co_truncate(BlockDriverState *bs, int64_t offset, 2218 bool exact, PreallocMode prealloc, 2219 BdrvRequestFlags flags, Error **errp) 2220 { 2221 BDRVRawState *s = bs->opaque; 2222 struct stat st; 2223 int ret; 2224 2225 if (fstat(s->fd, &st)) { 2226 ret = -errno; 2227 error_setg_errno(errp, -ret, "Failed to fstat() the file"); 2228 return ret; 2229 } 2230 2231 if (S_ISREG(st.st_mode)) { 2232 /* Always resizes to the exact @offset */ 2233 return raw_regular_truncate(bs, s->fd, offset, prealloc, errp); 2234 } 2235 2236 if (prealloc != PREALLOC_MODE_OFF) { 2237 error_setg(errp, "Preallocation mode '%s' unsupported for this " 2238 "non-regular file", PreallocMode_str(prealloc)); 2239 return -ENOTSUP; 2240 } 2241 2242 if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) { 2243 int64_t cur_length = raw_getlength(bs); 2244 2245 if (offset != cur_length && exact) { 2246 error_setg(errp, "Cannot resize device files"); 2247 return -ENOTSUP; 2248 } else if (offset > cur_length) { 2249 error_setg(errp, "Cannot grow device files"); 2250 return -EINVAL; 2251 } 2252 } else { 2253 error_setg(errp, "Resizing this file is not supported"); 2254 return -ENOTSUP; 2255 } 2256 2257 return 0; 2258 } 2259 2260 #ifdef __OpenBSD__ 2261 static int64_t raw_getlength(BlockDriverState *bs) 2262 { 2263 BDRVRawState *s = bs->opaque; 2264 int fd = s->fd; 2265 struct stat st; 2266 2267 if (fstat(fd, &st)) 2268 return -errno; 2269 if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) { 2270 struct disklabel dl; 2271 2272 if (ioctl(fd, DIOCGDINFO, &dl)) 2273 return -errno; 2274 return (uint64_t)dl.d_secsize * 2275 dl.d_partitions[DISKPART(st.st_rdev)].p_size; 2276 } else 2277 return st.st_size; 2278 } 2279 #elif defined(__NetBSD__) 2280 static int64_t raw_getlength(BlockDriverState *bs) 2281 { 2282 BDRVRawState *s = bs->opaque; 2283 int fd = s->fd; 2284 struct stat st; 2285 2286 if (fstat(fd, &st)) 2287 return -errno; 2288 if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) { 2289 struct dkwedge_info dkw; 2290 2291 if (ioctl(fd, DIOCGWEDGEINFO, &dkw) != -1) { 2292 return dkw.dkw_size * 512; 2293 } else { 2294 struct disklabel dl; 2295 2296 if (ioctl(fd, DIOCGDINFO, &dl)) 2297 return -errno; 2298 return (uint64_t)dl.d_secsize * 2299 dl.d_partitions[DISKPART(st.st_rdev)].p_size; 2300 } 2301 } else 2302 return st.st_size; 2303 } 2304 #elif defined(__sun__) 2305 static int64_t raw_getlength(BlockDriverState *bs) 2306 { 2307 BDRVRawState *s = bs->opaque; 2308 struct dk_minfo minfo; 2309 int ret; 2310 int64_t size; 2311 2312 ret = fd_open(bs); 2313 if (ret < 0) { 2314 return ret; 2315 } 2316 2317 /* 2318 * Use the DKIOCGMEDIAINFO ioctl to read the size. 2319 */ 2320 ret = ioctl(s->fd, DKIOCGMEDIAINFO, &minfo); 2321 if (ret != -1) { 2322 return minfo.dki_lbsize * minfo.dki_capacity; 2323 } 2324 2325 /* 2326 * There are reports that lseek on some devices fails, but 2327 * irc discussion said that contingency on contingency was overkill. 2328 */ 2329 size = lseek(s->fd, 0, SEEK_END); 2330 if (size < 0) { 2331 return -errno; 2332 } 2333 return size; 2334 } 2335 #elif defined(CONFIG_BSD) 2336 static int64_t raw_getlength(BlockDriverState *bs) 2337 { 2338 BDRVRawState *s = bs->opaque; 2339 int fd = s->fd; 2340 int64_t size; 2341 struct stat sb; 2342 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__) 2343 int reopened = 0; 2344 #endif 2345 int ret; 2346 2347 ret = fd_open(bs); 2348 if (ret < 0) 2349 return ret; 2350 2351 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__) 2352 again: 2353 #endif 2354 if (!fstat(fd, &sb) && (S_IFCHR & sb.st_mode)) { 2355 size = 0; 2356 #ifdef DIOCGMEDIASIZE 2357 if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size)) { 2358 size = 0; 2359 } 2360 #endif 2361 #ifdef DIOCGPART 2362 if (size == 0) { 2363 struct partinfo pi; 2364 if (ioctl(fd, DIOCGPART, &pi) == 0) { 2365 size = pi.media_size; 2366 } 2367 } 2368 #endif 2369 #if defined(DKIOCGETBLOCKCOUNT) && defined(DKIOCGETBLOCKSIZE) 2370 if (size == 0) { 2371 uint64_t sectors = 0; 2372 uint32_t sector_size = 0; 2373 2374 if (ioctl(fd, DKIOCGETBLOCKCOUNT, §ors) == 0 2375 && ioctl(fd, DKIOCGETBLOCKSIZE, §or_size) == 0) { 2376 size = sectors * sector_size; 2377 } 2378 } 2379 #endif 2380 if (size == 0) { 2381 size = lseek(fd, 0LL, SEEK_END); 2382 } 2383 if (size < 0) { 2384 return -errno; 2385 } 2386 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) 2387 switch(s->type) { 2388 case FTYPE_CD: 2389 /* XXX FreeBSD acd returns UINT_MAX sectors for an empty drive */ 2390 if (size == 2048LL * (unsigned)-1) 2391 size = 0; 2392 /* XXX no disc? maybe we need to reopen... */ 2393 if (size <= 0 && !reopened && cdrom_reopen(bs) >= 0) { 2394 reopened = 1; 2395 goto again; 2396 } 2397 } 2398 #endif 2399 } else { 2400 size = lseek(fd, 0, SEEK_END); 2401 if (size < 0) { 2402 return -errno; 2403 } 2404 } 2405 return size; 2406 } 2407 #else 2408 static int64_t raw_getlength(BlockDriverState *bs) 2409 { 2410 BDRVRawState *s = bs->opaque; 2411 int ret; 2412 int64_t size; 2413 2414 ret = fd_open(bs); 2415 if (ret < 0) { 2416 return ret; 2417 } 2418 2419 size = lseek(s->fd, 0, SEEK_END); 2420 if (size < 0) { 2421 return -errno; 2422 } 2423 return size; 2424 } 2425 #endif 2426 2427 static int64_t raw_get_allocated_file_size(BlockDriverState *bs) 2428 { 2429 struct stat st; 2430 BDRVRawState *s = bs->opaque; 2431 2432 if (fstat(s->fd, &st) < 0) { 2433 return -errno; 2434 } 2435 return (int64_t)st.st_blocks * 512; 2436 } 2437 2438 static int coroutine_fn 2439 raw_co_create(BlockdevCreateOptions *options, Error **errp) 2440 { 2441 BlockdevCreateOptionsFile *file_opts; 2442 Error *local_err = NULL; 2443 int fd; 2444 uint64_t perm, shared; 2445 int result = 0; 2446 2447 /* Validate options and set default values */ 2448 assert(options->driver == BLOCKDEV_DRIVER_FILE); 2449 file_opts = &options->u.file; 2450 2451 if (!file_opts->has_nocow) { 2452 file_opts->nocow = false; 2453 } 2454 if (!file_opts->has_preallocation) { 2455 file_opts->preallocation = PREALLOC_MODE_OFF; 2456 } 2457 if (!file_opts->has_extent_size_hint) { 2458 file_opts->extent_size_hint = 1 * MiB; 2459 } 2460 if (file_opts->extent_size_hint > UINT32_MAX) { 2461 result = -EINVAL; 2462 error_setg(errp, "Extent size hint is too large"); 2463 goto out; 2464 } 2465 2466 /* Create file */ 2467 fd = qemu_create(file_opts->filename, O_RDWR | O_BINARY, 0644, errp); 2468 if (fd < 0) { 2469 result = -errno; 2470 goto out; 2471 } 2472 2473 /* Take permissions: We want to discard everything, so we need 2474 * BLK_PERM_WRITE; and truncation to the desired size requires 2475 * BLK_PERM_RESIZE. 2476 * On the other hand, we cannot share the RESIZE permission 2477 * because we promise that after this function, the file has the 2478 * size given in the options. If someone else were to resize it 2479 * concurrently, we could not guarantee that. 2480 * Note that after this function, we can no longer guarantee that 2481 * the file is not touched by a third party, so it may be resized 2482 * then. */ 2483 perm = BLK_PERM_WRITE | BLK_PERM_RESIZE; 2484 shared = BLK_PERM_ALL & ~BLK_PERM_RESIZE; 2485 2486 /* Step one: Take locks */ 2487 result = raw_apply_lock_bytes(NULL, fd, perm, ~shared, false, errp); 2488 if (result < 0) { 2489 goto out_close; 2490 } 2491 2492 /* Step two: Check that nobody else has taken conflicting locks */ 2493 result = raw_check_lock_bytes(fd, perm, shared, errp); 2494 if (result < 0) { 2495 error_append_hint(errp, 2496 "Is another process using the image [%s]?\n", 2497 file_opts->filename); 2498 goto out_unlock; 2499 } 2500 2501 /* Clear the file by truncating it to 0 */ 2502 result = raw_regular_truncate(NULL, fd, 0, PREALLOC_MODE_OFF, errp); 2503 if (result < 0) { 2504 goto out_unlock; 2505 } 2506 2507 if (file_opts->nocow) { 2508 #ifdef __linux__ 2509 /* Set NOCOW flag to solve performance issue on fs like btrfs. 2510 * This is an optimisation. The FS_IOC_SETFLAGS ioctl return value 2511 * will be ignored since any failure of this operation should not 2512 * block the left work. 2513 */ 2514 int attr; 2515 if (ioctl(fd, FS_IOC_GETFLAGS, &attr) == 0) { 2516 attr |= FS_NOCOW_FL; 2517 ioctl(fd, FS_IOC_SETFLAGS, &attr); 2518 } 2519 #endif 2520 } 2521 #ifdef FS_IOC_FSSETXATTR 2522 /* 2523 * Try to set the extent size hint. Failure is not fatal, and a warning is 2524 * only printed if the option was explicitly specified. 2525 */ 2526 { 2527 struct fsxattr attr; 2528 result = ioctl(fd, FS_IOC_FSGETXATTR, &attr); 2529 if (result == 0) { 2530 attr.fsx_xflags |= FS_XFLAG_EXTSIZE; 2531 attr.fsx_extsize = file_opts->extent_size_hint; 2532 result = ioctl(fd, FS_IOC_FSSETXATTR, &attr); 2533 } 2534 if (result < 0 && file_opts->has_extent_size_hint && 2535 file_opts->extent_size_hint) 2536 { 2537 warn_report("Failed to set extent size hint: %s", 2538 strerror(errno)); 2539 } 2540 } 2541 #endif 2542 2543 /* Resize and potentially preallocate the file to the desired 2544 * final size */ 2545 result = raw_regular_truncate(NULL, fd, file_opts->size, 2546 file_opts->preallocation, errp); 2547 if (result < 0) { 2548 goto out_unlock; 2549 } 2550 2551 out_unlock: 2552 raw_apply_lock_bytes(NULL, fd, 0, 0, true, &local_err); 2553 if (local_err) { 2554 /* The above call should not fail, and if it does, that does 2555 * not mean the whole creation operation has failed. So 2556 * report it the user for their convenience, but do not report 2557 * it to the caller. */ 2558 warn_report_err(local_err); 2559 } 2560 2561 out_close: 2562 if (qemu_close(fd) != 0 && result == 0) { 2563 result = -errno; 2564 error_setg_errno(errp, -result, "Could not close the new file"); 2565 } 2566 out: 2567 return result; 2568 } 2569 2570 static int coroutine_fn raw_co_create_opts(BlockDriver *drv, 2571 const char *filename, 2572 QemuOpts *opts, 2573 Error **errp) 2574 { 2575 BlockdevCreateOptions options; 2576 int64_t total_size = 0; 2577 int64_t extent_size_hint = 0; 2578 bool has_extent_size_hint = false; 2579 bool nocow = false; 2580 PreallocMode prealloc; 2581 char *buf = NULL; 2582 Error *local_err = NULL; 2583 2584 /* Skip file: protocol prefix */ 2585 strstart(filename, "file:", &filename); 2586 2587 /* Read out options */ 2588 total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0), 2589 BDRV_SECTOR_SIZE); 2590 if (qemu_opt_get(opts, BLOCK_OPT_EXTENT_SIZE_HINT)) { 2591 has_extent_size_hint = true; 2592 extent_size_hint = 2593 qemu_opt_get_size_del(opts, BLOCK_OPT_EXTENT_SIZE_HINT, -1); 2594 } 2595 nocow = qemu_opt_get_bool(opts, BLOCK_OPT_NOCOW, false); 2596 buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC); 2597 prealloc = qapi_enum_parse(&PreallocMode_lookup, buf, 2598 PREALLOC_MODE_OFF, &local_err); 2599 g_free(buf); 2600 if (local_err) { 2601 error_propagate(errp, local_err); 2602 return -EINVAL; 2603 } 2604 2605 options = (BlockdevCreateOptions) { 2606 .driver = BLOCKDEV_DRIVER_FILE, 2607 .u.file = { 2608 .filename = (char *) filename, 2609 .size = total_size, 2610 .has_preallocation = true, 2611 .preallocation = prealloc, 2612 .has_nocow = true, 2613 .nocow = nocow, 2614 .has_extent_size_hint = has_extent_size_hint, 2615 .extent_size_hint = extent_size_hint, 2616 }, 2617 }; 2618 return raw_co_create(&options, errp); 2619 } 2620 2621 static int coroutine_fn raw_co_delete_file(BlockDriverState *bs, 2622 Error **errp) 2623 { 2624 struct stat st; 2625 int ret; 2626 2627 if (!(stat(bs->filename, &st) == 0) || !S_ISREG(st.st_mode)) { 2628 error_setg_errno(errp, ENOENT, "%s is not a regular file", 2629 bs->filename); 2630 return -ENOENT; 2631 } 2632 2633 ret = unlink(bs->filename); 2634 if (ret < 0) { 2635 ret = -errno; 2636 error_setg_errno(errp, -ret, "Error when deleting file %s", 2637 bs->filename); 2638 } 2639 2640 return ret; 2641 } 2642 2643 /* 2644 * Find allocation range in @bs around offset @start. 2645 * May change underlying file descriptor's file offset. 2646 * If @start is not in a hole, store @start in @data, and the 2647 * beginning of the next hole in @hole, and return 0. 2648 * If @start is in a non-trailing hole, store @start in @hole and the 2649 * beginning of the next non-hole in @data, and return 0. 2650 * If @start is in a trailing hole or beyond EOF, return -ENXIO. 2651 * If we can't find out, return a negative errno other than -ENXIO. 2652 */ 2653 static int find_allocation(BlockDriverState *bs, off_t start, 2654 off_t *data, off_t *hole) 2655 { 2656 #if defined SEEK_HOLE && defined SEEK_DATA 2657 BDRVRawState *s = bs->opaque; 2658 off_t offs; 2659 2660 /* 2661 * SEEK_DATA cases: 2662 * D1. offs == start: start is in data 2663 * D2. offs > start: start is in a hole, next data at offs 2664 * D3. offs < 0, errno = ENXIO: either start is in a trailing hole 2665 * or start is beyond EOF 2666 * If the latter happens, the file has been truncated behind 2667 * our back since we opened it. All bets are off then. 2668 * Treating like a trailing hole is simplest. 2669 * D4. offs < 0, errno != ENXIO: we learned nothing 2670 */ 2671 offs = lseek(s->fd, start, SEEK_DATA); 2672 if (offs < 0) { 2673 return -errno; /* D3 or D4 */ 2674 } 2675 2676 if (offs < start) { 2677 /* This is not a valid return by lseek(). We are safe to just return 2678 * -EIO in this case, and we'll treat it like D4. */ 2679 return -EIO; 2680 } 2681 2682 if (offs > start) { 2683 /* D2: in hole, next data at offs */ 2684 *hole = start; 2685 *data = offs; 2686 return 0; 2687 } 2688 2689 /* D1: in data, end not yet known */ 2690 2691 /* 2692 * SEEK_HOLE cases: 2693 * H1. offs == start: start is in a hole 2694 * If this happens here, a hole has been dug behind our back 2695 * since the previous lseek(). 2696 * H2. offs > start: either start is in data, next hole at offs, 2697 * or start is in trailing hole, EOF at offs 2698 * Linux treats trailing holes like any other hole: offs == 2699 * start. Solaris seeks to EOF instead: offs > start (blech). 2700 * If that happens here, a hole has been dug behind our back 2701 * since the previous lseek(). 2702 * H3. offs < 0, errno = ENXIO: start is beyond EOF 2703 * If this happens, the file has been truncated behind our 2704 * back since we opened it. Treat it like a trailing hole. 2705 * H4. offs < 0, errno != ENXIO: we learned nothing 2706 * Pretend we know nothing at all, i.e. "forget" about D1. 2707 */ 2708 offs = lseek(s->fd, start, SEEK_HOLE); 2709 if (offs < 0) { 2710 return -errno; /* D1 and (H3 or H4) */ 2711 } 2712 2713 if (offs < start) { 2714 /* This is not a valid return by lseek(). We are safe to just return 2715 * -EIO in this case, and we'll treat it like H4. */ 2716 return -EIO; 2717 } 2718 2719 if (offs > start) { 2720 /* 2721 * D1 and H2: either in data, next hole at offs, or it was in 2722 * data but is now in a trailing hole. In the latter case, 2723 * all bets are off. Treating it as if it there was data all 2724 * the way to EOF is safe, so simply do that. 2725 */ 2726 *data = start; 2727 *hole = offs; 2728 return 0; 2729 } 2730 2731 /* D1 and H1 */ 2732 return -EBUSY; 2733 #else 2734 return -ENOTSUP; 2735 #endif 2736 } 2737 2738 /* 2739 * Returns the allocation status of the specified offset. 2740 * 2741 * The block layer guarantees 'offset' and 'bytes' are within bounds. 2742 * 2743 * 'pnum' is set to the number of bytes (including and immediately following 2744 * the specified offset) that are known to be in the same 2745 * allocated/unallocated state. 2746 * 2747 * 'bytes' is the max value 'pnum' should be set to. 2748 */ 2749 static int coroutine_fn raw_co_block_status(BlockDriverState *bs, 2750 bool want_zero, 2751 int64_t offset, 2752 int64_t bytes, int64_t *pnum, 2753 int64_t *map, 2754 BlockDriverState **file) 2755 { 2756 off_t data = 0, hole = 0; 2757 int ret; 2758 2759 assert(QEMU_IS_ALIGNED(offset | bytes, bs->bl.request_alignment)); 2760 2761 ret = fd_open(bs); 2762 if (ret < 0) { 2763 return ret; 2764 } 2765 2766 if (!want_zero) { 2767 *pnum = bytes; 2768 *map = offset; 2769 *file = bs; 2770 return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID; 2771 } 2772 2773 ret = find_allocation(bs, offset, &data, &hole); 2774 if (ret == -ENXIO) { 2775 /* Trailing hole */ 2776 *pnum = bytes; 2777 ret = BDRV_BLOCK_ZERO; 2778 } else if (ret < 0) { 2779 /* No info available, so pretend there are no holes */ 2780 *pnum = bytes; 2781 ret = BDRV_BLOCK_DATA; 2782 } else if (data == offset) { 2783 /* On a data extent, compute bytes to the end of the extent, 2784 * possibly including a partial sector at EOF. */ 2785 *pnum = MIN(bytes, hole - offset); 2786 2787 /* 2788 * We are not allowed to return partial sectors, though, so 2789 * round up if necessary. 2790 */ 2791 if (!QEMU_IS_ALIGNED(*pnum, bs->bl.request_alignment)) { 2792 int64_t file_length = raw_getlength(bs); 2793 if (file_length > 0) { 2794 /* Ignore errors, this is just a safeguard */ 2795 assert(hole == file_length); 2796 } 2797 *pnum = ROUND_UP(*pnum, bs->bl.request_alignment); 2798 } 2799 2800 ret = BDRV_BLOCK_DATA; 2801 } else { 2802 /* On a hole, compute bytes to the beginning of the next extent. */ 2803 assert(hole == offset); 2804 *pnum = MIN(bytes, data - offset); 2805 ret = BDRV_BLOCK_ZERO; 2806 } 2807 *map = offset; 2808 *file = bs; 2809 return ret | BDRV_BLOCK_OFFSET_VALID; 2810 } 2811 2812 #if defined(__linux__) 2813 /* Verify that the file is not in the page cache */ 2814 static void check_cache_dropped(BlockDriverState *bs, Error **errp) 2815 { 2816 const size_t window_size = 128 * 1024 * 1024; 2817 BDRVRawState *s = bs->opaque; 2818 void *window = NULL; 2819 size_t length = 0; 2820 unsigned char *vec; 2821 size_t page_size; 2822 off_t offset; 2823 off_t end; 2824 2825 /* mincore(2) page status information requires 1 byte per page */ 2826 page_size = sysconf(_SC_PAGESIZE); 2827 vec = g_malloc(DIV_ROUND_UP(window_size, page_size)); 2828 2829 end = raw_getlength(bs); 2830 2831 for (offset = 0; offset < end; offset += window_size) { 2832 void *new_window; 2833 size_t new_length; 2834 size_t vec_end; 2835 size_t i; 2836 int ret; 2837 2838 /* Unmap previous window if size has changed */ 2839 new_length = MIN(end - offset, window_size); 2840 if (new_length != length) { 2841 munmap(window, length); 2842 window = NULL; 2843 length = 0; 2844 } 2845 2846 new_window = mmap(window, new_length, PROT_NONE, MAP_PRIVATE, 2847 s->fd, offset); 2848 if (new_window == MAP_FAILED) { 2849 error_setg_errno(errp, errno, "mmap failed"); 2850 break; 2851 } 2852 2853 window = new_window; 2854 length = new_length; 2855 2856 ret = mincore(window, length, vec); 2857 if (ret < 0) { 2858 error_setg_errno(errp, errno, "mincore failed"); 2859 break; 2860 } 2861 2862 vec_end = DIV_ROUND_UP(length, page_size); 2863 for (i = 0; i < vec_end; i++) { 2864 if (vec[i] & 0x1) { 2865 break; 2866 } 2867 } 2868 if (i < vec_end) { 2869 error_setg(errp, "page cache still in use!"); 2870 break; 2871 } 2872 } 2873 2874 if (window) { 2875 munmap(window, length); 2876 } 2877 2878 g_free(vec); 2879 } 2880 #endif /* __linux__ */ 2881 2882 static void coroutine_fn raw_co_invalidate_cache(BlockDriverState *bs, 2883 Error **errp) 2884 { 2885 BDRVRawState *s = bs->opaque; 2886 int ret; 2887 2888 ret = fd_open(bs); 2889 if (ret < 0) { 2890 error_setg_errno(errp, -ret, "The file descriptor is not open"); 2891 return; 2892 } 2893 2894 if (!s->drop_cache) { 2895 return; 2896 } 2897 2898 if (s->open_flags & O_DIRECT) { 2899 return; /* No host kernel page cache */ 2900 } 2901 2902 #if defined(__linux__) 2903 /* This sets the scene for the next syscall... */ 2904 ret = bdrv_co_flush(bs); 2905 if (ret < 0) { 2906 error_setg_errno(errp, -ret, "flush failed"); 2907 return; 2908 } 2909 2910 /* Linux does not invalidate pages that are dirty, locked, or mmapped by a 2911 * process. These limitations are okay because we just fsynced the file, 2912 * we don't use mmap, and the file should not be in use by other processes. 2913 */ 2914 ret = posix_fadvise(s->fd, 0, 0, POSIX_FADV_DONTNEED); 2915 if (ret != 0) { /* the return value is a positive errno */ 2916 error_setg_errno(errp, ret, "fadvise failed"); 2917 return; 2918 } 2919 2920 if (s->check_cache_dropped) { 2921 check_cache_dropped(bs, errp); 2922 } 2923 #else /* __linux__ */ 2924 /* Do nothing. Live migration to a remote host with cache.direct=off is 2925 * unsupported on other host operating systems. Cache consistency issues 2926 * may occur but no error is reported here, partly because that's the 2927 * historical behavior and partly because it's hard to differentiate valid 2928 * configurations that should not cause errors. 2929 */ 2930 #endif /* !__linux__ */ 2931 } 2932 2933 static void raw_account_discard(BDRVRawState *s, uint64_t nbytes, int ret) 2934 { 2935 if (ret) { 2936 s->stats.discard_nb_failed++; 2937 } else { 2938 s->stats.discard_nb_ok++; 2939 s->stats.discard_bytes_ok += nbytes; 2940 } 2941 } 2942 2943 static coroutine_fn int 2944 raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int bytes, bool blkdev) 2945 { 2946 BDRVRawState *s = bs->opaque; 2947 RawPosixAIOData acb; 2948 int ret; 2949 2950 acb = (RawPosixAIOData) { 2951 .bs = bs, 2952 .aio_fildes = s->fd, 2953 .aio_type = QEMU_AIO_DISCARD, 2954 .aio_offset = offset, 2955 .aio_nbytes = bytes, 2956 }; 2957 2958 if (blkdev) { 2959 acb.aio_type |= QEMU_AIO_BLKDEV; 2960 } 2961 2962 ret = raw_thread_pool_submit(bs, handle_aiocb_discard, &acb); 2963 raw_account_discard(s, bytes, ret); 2964 return ret; 2965 } 2966 2967 static coroutine_fn int 2968 raw_co_pdiscard(BlockDriverState *bs, int64_t offset, int bytes) 2969 { 2970 return raw_do_pdiscard(bs, offset, bytes, false); 2971 } 2972 2973 static int coroutine_fn 2974 raw_do_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int bytes, 2975 BdrvRequestFlags flags, bool blkdev) 2976 { 2977 BDRVRawState *s = bs->opaque; 2978 RawPosixAIOData acb; 2979 ThreadPoolFunc *handler; 2980 2981 #ifdef CONFIG_FALLOCATE 2982 if (offset + bytes > bs->total_sectors * BDRV_SECTOR_SIZE) { 2983 BdrvTrackedRequest *req; 2984 2985 /* 2986 * This is a workaround for a bug in the Linux XFS driver, 2987 * where writes submitted through the AIO interface will be 2988 * discarded if they happen beyond a concurrently running 2989 * fallocate() that increases the file length (i.e., both the 2990 * write and the fallocate() happen beyond the EOF). 2991 * 2992 * To work around it, we extend the tracked request for this 2993 * zero write until INT64_MAX (effectively infinity), and mark 2994 * it as serializing. 2995 * 2996 * We have to enable this workaround for all filesystems and 2997 * AIO modes (not just XFS with aio=native), because for 2998 * remote filesystems we do not know the host configuration. 2999 */ 3000 3001 req = bdrv_co_get_self_request(bs); 3002 assert(req); 3003 assert(req->type == BDRV_TRACKED_WRITE); 3004 assert(req->offset <= offset); 3005 assert(req->offset + req->bytes >= offset + bytes); 3006 3007 req->bytes = BDRV_MAX_LENGTH - req->offset; 3008 3009 bdrv_check_request(req->offset, req->bytes, &error_abort); 3010 3011 bdrv_make_request_serialising(req, bs->bl.request_alignment); 3012 } 3013 #endif 3014 3015 acb = (RawPosixAIOData) { 3016 .bs = bs, 3017 .aio_fildes = s->fd, 3018 .aio_type = QEMU_AIO_WRITE_ZEROES, 3019 .aio_offset = offset, 3020 .aio_nbytes = bytes, 3021 }; 3022 3023 if (blkdev) { 3024 acb.aio_type |= QEMU_AIO_BLKDEV; 3025 } 3026 if (flags & BDRV_REQ_NO_FALLBACK) { 3027 acb.aio_type |= QEMU_AIO_NO_FALLBACK; 3028 } 3029 3030 if (flags & BDRV_REQ_MAY_UNMAP) { 3031 acb.aio_type |= QEMU_AIO_DISCARD; 3032 handler = handle_aiocb_write_zeroes_unmap; 3033 } else { 3034 handler = handle_aiocb_write_zeroes; 3035 } 3036 3037 return raw_thread_pool_submit(bs, handler, &acb); 3038 } 3039 3040 static int coroutine_fn raw_co_pwrite_zeroes( 3041 BlockDriverState *bs, int64_t offset, 3042 int bytes, BdrvRequestFlags flags) 3043 { 3044 return raw_do_pwrite_zeroes(bs, offset, bytes, flags, false); 3045 } 3046 3047 static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi) 3048 { 3049 return 0; 3050 } 3051 3052 static BlockStatsSpecificFile get_blockstats_specific_file(BlockDriverState *bs) 3053 { 3054 BDRVRawState *s = bs->opaque; 3055 return (BlockStatsSpecificFile) { 3056 .discard_nb_ok = s->stats.discard_nb_ok, 3057 .discard_nb_failed = s->stats.discard_nb_failed, 3058 .discard_bytes_ok = s->stats.discard_bytes_ok, 3059 }; 3060 } 3061 3062 static BlockStatsSpecific *raw_get_specific_stats(BlockDriverState *bs) 3063 { 3064 BlockStatsSpecific *stats = g_new(BlockStatsSpecific, 1); 3065 3066 stats->driver = BLOCKDEV_DRIVER_FILE; 3067 stats->u.file = get_blockstats_specific_file(bs); 3068 3069 return stats; 3070 } 3071 3072 #if defined(HAVE_HOST_BLOCK_DEVICE) 3073 static BlockStatsSpecific *hdev_get_specific_stats(BlockDriverState *bs) 3074 { 3075 BlockStatsSpecific *stats = g_new(BlockStatsSpecific, 1); 3076 3077 stats->driver = BLOCKDEV_DRIVER_HOST_DEVICE; 3078 stats->u.host_device = get_blockstats_specific_file(bs); 3079 3080 return stats; 3081 } 3082 #endif /* HAVE_HOST_BLOCK_DEVICE */ 3083 3084 static QemuOptsList raw_create_opts = { 3085 .name = "raw-create-opts", 3086 .head = QTAILQ_HEAD_INITIALIZER(raw_create_opts.head), 3087 .desc = { 3088 { 3089 .name = BLOCK_OPT_SIZE, 3090 .type = QEMU_OPT_SIZE, 3091 .help = "Virtual disk size" 3092 }, 3093 { 3094 .name = BLOCK_OPT_NOCOW, 3095 .type = QEMU_OPT_BOOL, 3096 .help = "Turn off copy-on-write (valid only on btrfs)" 3097 }, 3098 { 3099 .name = BLOCK_OPT_PREALLOC, 3100 .type = QEMU_OPT_STRING, 3101 .help = "Preallocation mode (allowed values: off" 3102 #ifdef CONFIG_POSIX_FALLOCATE 3103 ", falloc" 3104 #endif 3105 ", full)" 3106 }, 3107 { 3108 .name = BLOCK_OPT_EXTENT_SIZE_HINT, 3109 .type = QEMU_OPT_SIZE, 3110 .help = "Extent size hint for the image file, 0 to disable" 3111 }, 3112 { /* end of list */ } 3113 } 3114 }; 3115 3116 static int raw_check_perm(BlockDriverState *bs, uint64_t perm, uint64_t shared, 3117 Error **errp) 3118 { 3119 BDRVRawState *s = bs->opaque; 3120 int input_flags = s->reopen_state ? s->reopen_state->flags : bs->open_flags; 3121 int open_flags; 3122 int ret; 3123 3124 /* We may need a new fd if auto-read-only switches the mode */ 3125 ret = raw_reconfigure_getfd(bs, input_flags, &open_flags, perm, 3126 false, errp); 3127 if (ret < 0) { 3128 return ret; 3129 } else if (ret != s->fd) { 3130 Error *local_err = NULL; 3131 3132 /* 3133 * Fail already check_perm() if we can't get a working O_DIRECT 3134 * alignment with the new fd. 3135 */ 3136 raw_probe_alignment(bs, ret, &local_err); 3137 if (local_err) { 3138 error_propagate(errp, local_err); 3139 return -EINVAL; 3140 } 3141 3142 s->perm_change_fd = ret; 3143 s->perm_change_flags = open_flags; 3144 } 3145 3146 /* Prepare permissions on old fd to avoid conflicts between old and new, 3147 * but keep everything locked that new will need. */ 3148 ret = raw_handle_perm_lock(bs, RAW_PL_PREPARE, perm, shared, errp); 3149 if (ret < 0) { 3150 goto fail; 3151 } 3152 3153 /* Copy locks to the new fd */ 3154 if (s->perm_change_fd && s->use_lock) { 3155 ret = raw_apply_lock_bytes(NULL, s->perm_change_fd, perm, ~shared, 3156 false, errp); 3157 if (ret < 0) { 3158 raw_handle_perm_lock(bs, RAW_PL_ABORT, 0, 0, NULL); 3159 goto fail; 3160 } 3161 } 3162 return 0; 3163 3164 fail: 3165 if (s->perm_change_fd) { 3166 qemu_close(s->perm_change_fd); 3167 } 3168 s->perm_change_fd = 0; 3169 return ret; 3170 } 3171 3172 static void raw_set_perm(BlockDriverState *bs, uint64_t perm, uint64_t shared) 3173 { 3174 BDRVRawState *s = bs->opaque; 3175 3176 /* For reopen, we have already switched to the new fd (.bdrv_set_perm is 3177 * called after .bdrv_reopen_commit) */ 3178 if (s->perm_change_fd && s->fd != s->perm_change_fd) { 3179 qemu_close(s->fd); 3180 s->fd = s->perm_change_fd; 3181 s->open_flags = s->perm_change_flags; 3182 } 3183 s->perm_change_fd = 0; 3184 3185 raw_handle_perm_lock(bs, RAW_PL_COMMIT, perm, shared, NULL); 3186 s->perm = perm; 3187 s->shared_perm = shared; 3188 } 3189 3190 static void raw_abort_perm_update(BlockDriverState *bs) 3191 { 3192 BDRVRawState *s = bs->opaque; 3193 3194 /* For reopen, .bdrv_reopen_abort is called afterwards and will close 3195 * the file descriptor. */ 3196 if (s->perm_change_fd) { 3197 qemu_close(s->perm_change_fd); 3198 } 3199 s->perm_change_fd = 0; 3200 3201 raw_handle_perm_lock(bs, RAW_PL_ABORT, 0, 0, NULL); 3202 } 3203 3204 static int coroutine_fn raw_co_copy_range_from( 3205 BlockDriverState *bs, BdrvChild *src, uint64_t src_offset, 3206 BdrvChild *dst, uint64_t dst_offset, uint64_t bytes, 3207 BdrvRequestFlags read_flags, BdrvRequestFlags write_flags) 3208 { 3209 return bdrv_co_copy_range_to(src, src_offset, dst, dst_offset, bytes, 3210 read_flags, write_flags); 3211 } 3212 3213 static int coroutine_fn raw_co_copy_range_to(BlockDriverState *bs, 3214 BdrvChild *src, 3215 uint64_t src_offset, 3216 BdrvChild *dst, 3217 uint64_t dst_offset, 3218 uint64_t bytes, 3219 BdrvRequestFlags read_flags, 3220 BdrvRequestFlags write_flags) 3221 { 3222 RawPosixAIOData acb; 3223 BDRVRawState *s = bs->opaque; 3224 BDRVRawState *src_s; 3225 3226 assert(dst->bs == bs); 3227 if (src->bs->drv->bdrv_co_copy_range_to != raw_co_copy_range_to) { 3228 return -ENOTSUP; 3229 } 3230 3231 src_s = src->bs->opaque; 3232 if (fd_open(src->bs) < 0 || fd_open(dst->bs) < 0) { 3233 return -EIO; 3234 } 3235 3236 acb = (RawPosixAIOData) { 3237 .bs = bs, 3238 .aio_type = QEMU_AIO_COPY_RANGE, 3239 .aio_fildes = src_s->fd, 3240 .aio_offset = src_offset, 3241 .aio_nbytes = bytes, 3242 .copy_range = { 3243 .aio_fd2 = s->fd, 3244 .aio_offset2 = dst_offset, 3245 }, 3246 }; 3247 3248 return raw_thread_pool_submit(bs, handle_aiocb_copy_range, &acb); 3249 } 3250 3251 BlockDriver bdrv_file = { 3252 .format_name = "file", 3253 .protocol_name = "file", 3254 .instance_size = sizeof(BDRVRawState), 3255 .bdrv_needs_filename = true, 3256 .bdrv_probe = NULL, /* no probe for protocols */ 3257 .bdrv_parse_filename = raw_parse_filename, 3258 .bdrv_file_open = raw_open, 3259 .bdrv_reopen_prepare = raw_reopen_prepare, 3260 .bdrv_reopen_commit = raw_reopen_commit, 3261 .bdrv_reopen_abort = raw_reopen_abort, 3262 .bdrv_close = raw_close, 3263 .bdrv_co_create = raw_co_create, 3264 .bdrv_co_create_opts = raw_co_create_opts, 3265 .bdrv_has_zero_init = bdrv_has_zero_init_1, 3266 .bdrv_co_block_status = raw_co_block_status, 3267 .bdrv_co_invalidate_cache = raw_co_invalidate_cache, 3268 .bdrv_co_pwrite_zeroes = raw_co_pwrite_zeroes, 3269 .bdrv_co_delete_file = raw_co_delete_file, 3270 3271 .bdrv_co_preadv = raw_co_preadv, 3272 .bdrv_co_pwritev = raw_co_pwritev, 3273 .bdrv_co_flush_to_disk = raw_co_flush_to_disk, 3274 .bdrv_co_pdiscard = raw_co_pdiscard, 3275 .bdrv_co_copy_range_from = raw_co_copy_range_from, 3276 .bdrv_co_copy_range_to = raw_co_copy_range_to, 3277 .bdrv_refresh_limits = raw_refresh_limits, 3278 .bdrv_io_plug = raw_aio_plug, 3279 .bdrv_io_unplug = raw_aio_unplug, 3280 .bdrv_attach_aio_context = raw_aio_attach_aio_context, 3281 3282 .bdrv_co_truncate = raw_co_truncate, 3283 .bdrv_getlength = raw_getlength, 3284 .bdrv_get_info = raw_get_info, 3285 .bdrv_get_allocated_file_size 3286 = raw_get_allocated_file_size, 3287 .bdrv_get_specific_stats = raw_get_specific_stats, 3288 .bdrv_check_perm = raw_check_perm, 3289 .bdrv_set_perm = raw_set_perm, 3290 .bdrv_abort_perm_update = raw_abort_perm_update, 3291 .create_opts = &raw_create_opts, 3292 .mutable_opts = mutable_opts, 3293 }; 3294 3295 /***********************************************/ 3296 /* host device */ 3297 3298 #if defined(HAVE_HOST_BLOCK_DEVICE) 3299 3300 #if defined(__APPLE__) && defined(__MACH__) 3301 static kern_return_t GetBSDPath(io_iterator_t mediaIterator, char *bsdPath, 3302 CFIndex maxPathSize, int flags); 3303 static char *FindEjectableOpticalMedia(io_iterator_t *mediaIterator) 3304 { 3305 kern_return_t kernResult = KERN_FAILURE; 3306 mach_port_t masterPort; 3307 CFMutableDictionaryRef classesToMatch; 3308 const char *matching_array[] = {kIODVDMediaClass, kIOCDMediaClass}; 3309 char *mediaType = NULL; 3310 3311 kernResult = IOMasterPort( MACH_PORT_NULL, &masterPort ); 3312 if ( KERN_SUCCESS != kernResult ) { 3313 printf( "IOMasterPort returned %d\n", kernResult ); 3314 } 3315 3316 int index; 3317 for (index = 0; index < ARRAY_SIZE(matching_array); index++) { 3318 classesToMatch = IOServiceMatching(matching_array[index]); 3319 if (classesToMatch == NULL) { 3320 error_report("IOServiceMatching returned NULL for %s", 3321 matching_array[index]); 3322 continue; 3323 } 3324 CFDictionarySetValue(classesToMatch, CFSTR(kIOMediaEjectableKey), 3325 kCFBooleanTrue); 3326 kernResult = IOServiceGetMatchingServices(masterPort, classesToMatch, 3327 mediaIterator); 3328 if (kernResult != KERN_SUCCESS) { 3329 error_report("Note: IOServiceGetMatchingServices returned %d", 3330 kernResult); 3331 continue; 3332 } 3333 3334 /* If a match was found, leave the loop */ 3335 if (*mediaIterator != 0) { 3336 trace_file_FindEjectableOpticalMedia(matching_array[index]); 3337 mediaType = g_strdup(matching_array[index]); 3338 break; 3339 } 3340 } 3341 return mediaType; 3342 } 3343 3344 kern_return_t GetBSDPath(io_iterator_t mediaIterator, char *bsdPath, 3345 CFIndex maxPathSize, int flags) 3346 { 3347 io_object_t nextMedia; 3348 kern_return_t kernResult = KERN_FAILURE; 3349 *bsdPath = '\0'; 3350 nextMedia = IOIteratorNext( mediaIterator ); 3351 if ( nextMedia ) 3352 { 3353 CFTypeRef bsdPathAsCFString; 3354 bsdPathAsCFString = IORegistryEntryCreateCFProperty( nextMedia, CFSTR( kIOBSDNameKey ), kCFAllocatorDefault, 0 ); 3355 if ( bsdPathAsCFString ) { 3356 size_t devPathLength; 3357 strcpy( bsdPath, _PATH_DEV ); 3358 if (flags & BDRV_O_NOCACHE) { 3359 strcat(bsdPath, "r"); 3360 } 3361 devPathLength = strlen( bsdPath ); 3362 if ( CFStringGetCString( bsdPathAsCFString, bsdPath + devPathLength, maxPathSize - devPathLength, kCFStringEncodingASCII ) ) { 3363 kernResult = KERN_SUCCESS; 3364 } 3365 CFRelease( bsdPathAsCFString ); 3366 } 3367 IOObjectRelease( nextMedia ); 3368 } 3369 3370 return kernResult; 3371 } 3372 3373 /* Sets up a real cdrom for use in QEMU */ 3374 static bool setup_cdrom(char *bsd_path, Error **errp) 3375 { 3376 int index, num_of_test_partitions = 2, fd; 3377 char test_partition[MAXPATHLEN]; 3378 bool partition_found = false; 3379 3380 /* look for a working partition */ 3381 for (index = 0; index < num_of_test_partitions; index++) { 3382 snprintf(test_partition, sizeof(test_partition), "%ss%d", bsd_path, 3383 index); 3384 fd = qemu_open(test_partition, O_RDONLY | O_BINARY | O_LARGEFILE, NULL); 3385 if (fd >= 0) { 3386 partition_found = true; 3387 qemu_close(fd); 3388 break; 3389 } 3390 } 3391 3392 /* if a working partition on the device was not found */ 3393 if (partition_found == false) { 3394 error_setg(errp, "Failed to find a working partition on disc"); 3395 } else { 3396 trace_file_setup_cdrom(test_partition); 3397 pstrcpy(bsd_path, MAXPATHLEN, test_partition); 3398 } 3399 return partition_found; 3400 } 3401 3402 /* Prints directions on mounting and unmounting a device */ 3403 static void print_unmounting_directions(const char *file_name) 3404 { 3405 error_report("If device %s is mounted on the desktop, unmount" 3406 " it first before using it in QEMU", file_name); 3407 error_report("Command to unmount device: diskutil unmountDisk %s", 3408 file_name); 3409 error_report("Command to mount device: diskutil mountDisk %s", file_name); 3410 } 3411 3412 #endif /* defined(__APPLE__) && defined(__MACH__) */ 3413 3414 static int hdev_probe_device(const char *filename) 3415 { 3416 struct stat st; 3417 3418 /* allow a dedicated CD-ROM driver to match with a higher priority */ 3419 if (strstart(filename, "/dev/cdrom", NULL)) 3420 return 50; 3421 3422 if (stat(filename, &st) >= 0 && 3423 (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode))) { 3424 return 100; 3425 } 3426 3427 return 0; 3428 } 3429 3430 static void hdev_parse_filename(const char *filename, QDict *options, 3431 Error **errp) 3432 { 3433 bdrv_parse_filename_strip_prefix(filename, "host_device:", options); 3434 } 3435 3436 static bool hdev_is_sg(BlockDriverState *bs) 3437 { 3438 3439 #if defined(__linux__) 3440 3441 BDRVRawState *s = bs->opaque; 3442 struct stat st; 3443 struct sg_scsi_id scsiid; 3444 int sg_version; 3445 int ret; 3446 3447 if (stat(bs->filename, &st) < 0 || !S_ISCHR(st.st_mode)) { 3448 return false; 3449 } 3450 3451 ret = ioctl(s->fd, SG_GET_VERSION_NUM, &sg_version); 3452 if (ret < 0) { 3453 return false; 3454 } 3455 3456 ret = ioctl(s->fd, SG_GET_SCSI_ID, &scsiid); 3457 if (ret >= 0) { 3458 trace_file_hdev_is_sg(scsiid.scsi_type, sg_version); 3459 return true; 3460 } 3461 3462 #endif 3463 3464 return false; 3465 } 3466 3467 static int hdev_open(BlockDriverState *bs, QDict *options, int flags, 3468 Error **errp) 3469 { 3470 BDRVRawState *s = bs->opaque; 3471 int ret; 3472 3473 #if defined(__APPLE__) && defined(__MACH__) 3474 /* 3475 * Caution: while qdict_get_str() is fine, getting non-string types 3476 * would require more care. When @options come from -blockdev or 3477 * blockdev_add, its members are typed according to the QAPI 3478 * schema, but when they come from -drive, they're all QString. 3479 */ 3480 const char *filename = qdict_get_str(options, "filename"); 3481 char bsd_path[MAXPATHLEN] = ""; 3482 bool error_occurred = false; 3483 3484 /* If using a real cdrom */ 3485 if (strcmp(filename, "/dev/cdrom") == 0) { 3486 char *mediaType = NULL; 3487 kern_return_t ret_val; 3488 io_iterator_t mediaIterator = 0; 3489 3490 mediaType = FindEjectableOpticalMedia(&mediaIterator); 3491 if (mediaType == NULL) { 3492 error_setg(errp, "Please make sure your CD/DVD is in the optical" 3493 " drive"); 3494 error_occurred = true; 3495 goto hdev_open_Mac_error; 3496 } 3497 3498 ret_val = GetBSDPath(mediaIterator, bsd_path, sizeof(bsd_path), flags); 3499 if (ret_val != KERN_SUCCESS) { 3500 error_setg(errp, "Could not get BSD path for optical drive"); 3501 error_occurred = true; 3502 goto hdev_open_Mac_error; 3503 } 3504 3505 /* If a real optical drive was not found */ 3506 if (bsd_path[0] == '\0') { 3507 error_setg(errp, "Failed to obtain bsd path for optical drive"); 3508 error_occurred = true; 3509 goto hdev_open_Mac_error; 3510 } 3511 3512 /* If using a cdrom disc and finding a partition on the disc failed */ 3513 if (strncmp(mediaType, kIOCDMediaClass, 9) == 0 && 3514 setup_cdrom(bsd_path, errp) == false) { 3515 print_unmounting_directions(bsd_path); 3516 error_occurred = true; 3517 goto hdev_open_Mac_error; 3518 } 3519 3520 qdict_put_str(options, "filename", bsd_path); 3521 3522 hdev_open_Mac_error: 3523 g_free(mediaType); 3524 if (mediaIterator) { 3525 IOObjectRelease(mediaIterator); 3526 } 3527 if (error_occurred) { 3528 return -ENOENT; 3529 } 3530 } 3531 #endif /* defined(__APPLE__) && defined(__MACH__) */ 3532 3533 s->type = FTYPE_FILE; 3534 3535 ret = raw_open_common(bs, options, flags, 0, true, errp); 3536 if (ret < 0) { 3537 #if defined(__APPLE__) && defined(__MACH__) 3538 if (*bsd_path) { 3539 filename = bsd_path; 3540 } 3541 /* if a physical device experienced an error while being opened */ 3542 if (strncmp(filename, "/dev/", 5) == 0) { 3543 print_unmounting_directions(filename); 3544 } 3545 #endif /* defined(__APPLE__) && defined(__MACH__) */ 3546 return ret; 3547 } 3548 3549 /* Since this does ioctl the device must be already opened */ 3550 bs->sg = hdev_is_sg(bs); 3551 3552 return ret; 3553 } 3554 3555 #if defined(__linux__) 3556 static int coroutine_fn 3557 hdev_co_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) 3558 { 3559 BDRVRawState *s = bs->opaque; 3560 RawPosixAIOData acb; 3561 int ret; 3562 3563 ret = fd_open(bs); 3564 if (ret < 0) { 3565 return ret; 3566 } 3567 3568 if (req == SG_IO && s->pr_mgr) { 3569 struct sg_io_hdr *io_hdr = buf; 3570 if (io_hdr->cmdp[0] == PERSISTENT_RESERVE_OUT || 3571 io_hdr->cmdp[0] == PERSISTENT_RESERVE_IN) { 3572 return pr_manager_execute(s->pr_mgr, bdrv_get_aio_context(bs), 3573 s->fd, io_hdr); 3574 } 3575 } 3576 3577 acb = (RawPosixAIOData) { 3578 .bs = bs, 3579 .aio_type = QEMU_AIO_IOCTL, 3580 .aio_fildes = s->fd, 3581 .aio_offset = 0, 3582 .ioctl = { 3583 .buf = buf, 3584 .cmd = req, 3585 }, 3586 }; 3587 3588 return raw_thread_pool_submit(bs, handle_aiocb_ioctl, &acb); 3589 } 3590 #endif /* linux */ 3591 3592 static coroutine_fn int 3593 hdev_co_pdiscard(BlockDriverState *bs, int64_t offset, int bytes) 3594 { 3595 BDRVRawState *s = bs->opaque; 3596 int ret; 3597 3598 ret = fd_open(bs); 3599 if (ret < 0) { 3600 raw_account_discard(s, bytes, ret); 3601 return ret; 3602 } 3603 return raw_do_pdiscard(bs, offset, bytes, true); 3604 } 3605 3606 static coroutine_fn int hdev_co_pwrite_zeroes(BlockDriverState *bs, 3607 int64_t offset, int bytes, BdrvRequestFlags flags) 3608 { 3609 int rc; 3610 3611 rc = fd_open(bs); 3612 if (rc < 0) { 3613 return rc; 3614 } 3615 3616 return raw_do_pwrite_zeroes(bs, offset, bytes, flags, true); 3617 } 3618 3619 static BlockDriver bdrv_host_device = { 3620 .format_name = "host_device", 3621 .protocol_name = "host_device", 3622 .instance_size = sizeof(BDRVRawState), 3623 .bdrv_needs_filename = true, 3624 .bdrv_probe_device = hdev_probe_device, 3625 .bdrv_parse_filename = hdev_parse_filename, 3626 .bdrv_file_open = hdev_open, 3627 .bdrv_close = raw_close, 3628 .bdrv_reopen_prepare = raw_reopen_prepare, 3629 .bdrv_reopen_commit = raw_reopen_commit, 3630 .bdrv_reopen_abort = raw_reopen_abort, 3631 .bdrv_co_create_opts = bdrv_co_create_opts_simple, 3632 .create_opts = &bdrv_create_opts_simple, 3633 .mutable_opts = mutable_opts, 3634 .bdrv_co_invalidate_cache = raw_co_invalidate_cache, 3635 .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes, 3636 3637 .bdrv_co_preadv = raw_co_preadv, 3638 .bdrv_co_pwritev = raw_co_pwritev, 3639 .bdrv_co_flush_to_disk = raw_co_flush_to_disk, 3640 .bdrv_co_pdiscard = hdev_co_pdiscard, 3641 .bdrv_co_copy_range_from = raw_co_copy_range_from, 3642 .bdrv_co_copy_range_to = raw_co_copy_range_to, 3643 .bdrv_refresh_limits = raw_refresh_limits, 3644 .bdrv_io_plug = raw_aio_plug, 3645 .bdrv_io_unplug = raw_aio_unplug, 3646 .bdrv_attach_aio_context = raw_aio_attach_aio_context, 3647 3648 .bdrv_co_truncate = raw_co_truncate, 3649 .bdrv_getlength = raw_getlength, 3650 .bdrv_get_info = raw_get_info, 3651 .bdrv_get_allocated_file_size 3652 = raw_get_allocated_file_size, 3653 .bdrv_get_specific_stats = hdev_get_specific_stats, 3654 .bdrv_check_perm = raw_check_perm, 3655 .bdrv_set_perm = raw_set_perm, 3656 .bdrv_abort_perm_update = raw_abort_perm_update, 3657 .bdrv_probe_blocksizes = hdev_probe_blocksizes, 3658 .bdrv_probe_geometry = hdev_probe_geometry, 3659 3660 /* generic scsi device */ 3661 #ifdef __linux__ 3662 .bdrv_co_ioctl = hdev_co_ioctl, 3663 #endif 3664 }; 3665 3666 #if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__) 3667 static void cdrom_parse_filename(const char *filename, QDict *options, 3668 Error **errp) 3669 { 3670 bdrv_parse_filename_strip_prefix(filename, "host_cdrom:", options); 3671 } 3672 #endif 3673 3674 #ifdef __linux__ 3675 static int cdrom_open(BlockDriverState *bs, QDict *options, int flags, 3676 Error **errp) 3677 { 3678 BDRVRawState *s = bs->opaque; 3679 3680 s->type = FTYPE_CD; 3681 3682 /* open will not fail even if no CD is inserted, so add O_NONBLOCK */ 3683 return raw_open_common(bs, options, flags, O_NONBLOCK, true, errp); 3684 } 3685 3686 static int cdrom_probe_device(const char *filename) 3687 { 3688 int fd, ret; 3689 int prio = 0; 3690 struct stat st; 3691 3692 fd = qemu_open(filename, O_RDONLY | O_NONBLOCK, NULL); 3693 if (fd < 0) { 3694 goto out; 3695 } 3696 ret = fstat(fd, &st); 3697 if (ret == -1 || !S_ISBLK(st.st_mode)) { 3698 goto outc; 3699 } 3700 3701 /* Attempt to detect via a CDROM specific ioctl */ 3702 ret = ioctl(fd, CDROM_DRIVE_STATUS, CDSL_CURRENT); 3703 if (ret >= 0) 3704 prio = 100; 3705 3706 outc: 3707 qemu_close(fd); 3708 out: 3709 return prio; 3710 } 3711 3712 static bool cdrom_is_inserted(BlockDriverState *bs) 3713 { 3714 BDRVRawState *s = bs->opaque; 3715 int ret; 3716 3717 ret = ioctl(s->fd, CDROM_DRIVE_STATUS, CDSL_CURRENT); 3718 return ret == CDS_DISC_OK; 3719 } 3720 3721 static void cdrom_eject(BlockDriverState *bs, bool eject_flag) 3722 { 3723 BDRVRawState *s = bs->opaque; 3724 3725 if (eject_flag) { 3726 if (ioctl(s->fd, CDROMEJECT, NULL) < 0) 3727 perror("CDROMEJECT"); 3728 } else { 3729 if (ioctl(s->fd, CDROMCLOSETRAY, NULL) < 0) 3730 perror("CDROMEJECT"); 3731 } 3732 } 3733 3734 static void cdrom_lock_medium(BlockDriverState *bs, bool locked) 3735 { 3736 BDRVRawState *s = bs->opaque; 3737 3738 if (ioctl(s->fd, CDROM_LOCKDOOR, locked) < 0) { 3739 /* 3740 * Note: an error can happen if the distribution automatically 3741 * mounts the CD-ROM 3742 */ 3743 /* perror("CDROM_LOCKDOOR"); */ 3744 } 3745 } 3746 3747 static BlockDriver bdrv_host_cdrom = { 3748 .format_name = "host_cdrom", 3749 .protocol_name = "host_cdrom", 3750 .instance_size = sizeof(BDRVRawState), 3751 .bdrv_needs_filename = true, 3752 .bdrv_probe_device = cdrom_probe_device, 3753 .bdrv_parse_filename = cdrom_parse_filename, 3754 .bdrv_file_open = cdrom_open, 3755 .bdrv_close = raw_close, 3756 .bdrv_reopen_prepare = raw_reopen_prepare, 3757 .bdrv_reopen_commit = raw_reopen_commit, 3758 .bdrv_reopen_abort = raw_reopen_abort, 3759 .bdrv_co_create_opts = bdrv_co_create_opts_simple, 3760 .create_opts = &bdrv_create_opts_simple, 3761 .mutable_opts = mutable_opts, 3762 .bdrv_co_invalidate_cache = raw_co_invalidate_cache, 3763 3764 .bdrv_co_preadv = raw_co_preadv, 3765 .bdrv_co_pwritev = raw_co_pwritev, 3766 .bdrv_co_flush_to_disk = raw_co_flush_to_disk, 3767 .bdrv_refresh_limits = raw_refresh_limits, 3768 .bdrv_io_plug = raw_aio_plug, 3769 .bdrv_io_unplug = raw_aio_unplug, 3770 .bdrv_attach_aio_context = raw_aio_attach_aio_context, 3771 3772 .bdrv_co_truncate = raw_co_truncate, 3773 .bdrv_getlength = raw_getlength, 3774 .has_variable_length = true, 3775 .bdrv_get_allocated_file_size 3776 = raw_get_allocated_file_size, 3777 3778 /* removable device support */ 3779 .bdrv_is_inserted = cdrom_is_inserted, 3780 .bdrv_eject = cdrom_eject, 3781 .bdrv_lock_medium = cdrom_lock_medium, 3782 3783 /* generic scsi device */ 3784 .bdrv_co_ioctl = hdev_co_ioctl, 3785 }; 3786 #endif /* __linux__ */ 3787 3788 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__) 3789 static int cdrom_open(BlockDriverState *bs, QDict *options, int flags, 3790 Error **errp) 3791 { 3792 BDRVRawState *s = bs->opaque; 3793 int ret; 3794 3795 s->type = FTYPE_CD; 3796 3797 ret = raw_open_common(bs, options, flags, 0, true, errp); 3798 if (ret) { 3799 return ret; 3800 } 3801 3802 /* make sure the door isn't locked at this time */ 3803 ioctl(s->fd, CDIOCALLOW); 3804 return 0; 3805 } 3806 3807 static int cdrom_probe_device(const char *filename) 3808 { 3809 if (strstart(filename, "/dev/cd", NULL) || 3810 strstart(filename, "/dev/acd", NULL)) 3811 return 100; 3812 return 0; 3813 } 3814 3815 static int cdrom_reopen(BlockDriverState *bs) 3816 { 3817 BDRVRawState *s = bs->opaque; 3818 int fd; 3819 3820 /* 3821 * Force reread of possibly changed/newly loaded disc, 3822 * FreeBSD seems to not notice sometimes... 3823 */ 3824 if (s->fd >= 0) 3825 qemu_close(s->fd); 3826 fd = qemu_open(bs->filename, s->open_flags, NULL); 3827 if (fd < 0) { 3828 s->fd = -1; 3829 return -EIO; 3830 } 3831 s->fd = fd; 3832 3833 /* make sure the door isn't locked at this time */ 3834 ioctl(s->fd, CDIOCALLOW); 3835 return 0; 3836 } 3837 3838 static bool cdrom_is_inserted(BlockDriverState *bs) 3839 { 3840 return raw_getlength(bs) > 0; 3841 } 3842 3843 static void cdrom_eject(BlockDriverState *bs, bool eject_flag) 3844 { 3845 BDRVRawState *s = bs->opaque; 3846 3847 if (s->fd < 0) 3848 return; 3849 3850 (void) ioctl(s->fd, CDIOCALLOW); 3851 3852 if (eject_flag) { 3853 if (ioctl(s->fd, CDIOCEJECT) < 0) 3854 perror("CDIOCEJECT"); 3855 } else { 3856 if (ioctl(s->fd, CDIOCCLOSE) < 0) 3857 perror("CDIOCCLOSE"); 3858 } 3859 3860 cdrom_reopen(bs); 3861 } 3862 3863 static void cdrom_lock_medium(BlockDriverState *bs, bool locked) 3864 { 3865 BDRVRawState *s = bs->opaque; 3866 3867 if (s->fd < 0) 3868 return; 3869 if (ioctl(s->fd, (locked ? CDIOCPREVENT : CDIOCALLOW)) < 0) { 3870 /* 3871 * Note: an error can happen if the distribution automatically 3872 * mounts the CD-ROM 3873 */ 3874 /* perror("CDROM_LOCKDOOR"); */ 3875 } 3876 } 3877 3878 static BlockDriver bdrv_host_cdrom = { 3879 .format_name = "host_cdrom", 3880 .protocol_name = "host_cdrom", 3881 .instance_size = sizeof(BDRVRawState), 3882 .bdrv_needs_filename = true, 3883 .bdrv_probe_device = cdrom_probe_device, 3884 .bdrv_parse_filename = cdrom_parse_filename, 3885 .bdrv_file_open = cdrom_open, 3886 .bdrv_close = raw_close, 3887 .bdrv_reopen_prepare = raw_reopen_prepare, 3888 .bdrv_reopen_commit = raw_reopen_commit, 3889 .bdrv_reopen_abort = raw_reopen_abort, 3890 .bdrv_co_create_opts = bdrv_co_create_opts_simple, 3891 .create_opts = &bdrv_create_opts_simple, 3892 .mutable_opts = mutable_opts, 3893 3894 .bdrv_co_preadv = raw_co_preadv, 3895 .bdrv_co_pwritev = raw_co_pwritev, 3896 .bdrv_co_flush_to_disk = raw_co_flush_to_disk, 3897 .bdrv_refresh_limits = raw_refresh_limits, 3898 .bdrv_io_plug = raw_aio_plug, 3899 .bdrv_io_unplug = raw_aio_unplug, 3900 .bdrv_attach_aio_context = raw_aio_attach_aio_context, 3901 3902 .bdrv_co_truncate = raw_co_truncate, 3903 .bdrv_getlength = raw_getlength, 3904 .has_variable_length = true, 3905 .bdrv_get_allocated_file_size 3906 = raw_get_allocated_file_size, 3907 3908 /* removable device support */ 3909 .bdrv_is_inserted = cdrom_is_inserted, 3910 .bdrv_eject = cdrom_eject, 3911 .bdrv_lock_medium = cdrom_lock_medium, 3912 }; 3913 #endif /* __FreeBSD__ */ 3914 3915 #endif /* HAVE_HOST_BLOCK_DEVICE */ 3916 3917 static void bdrv_file_init(void) 3918 { 3919 /* 3920 * Register all the drivers. Note that order is important, the driver 3921 * registered last will get probed first. 3922 */ 3923 bdrv_register(&bdrv_file); 3924 #if defined(HAVE_HOST_BLOCK_DEVICE) 3925 bdrv_register(&bdrv_host_device); 3926 #ifdef __linux__ 3927 bdrv_register(&bdrv_host_cdrom); 3928 #endif 3929 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) 3930 bdrv_register(&bdrv_host_cdrom); 3931 #endif 3932 #endif /* HAVE_HOST_BLOCK_DEVICE */ 3933 } 3934 3935 block_init(bdrv_file_init); 3936