xref: /openbmc/qemu/block.c (revision f702e62a)
1 /*
2  * QEMU System Emulator block driver
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
38 
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48 
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52 
53 struct BdrvDirtyBitmap {
54     HBitmap *bitmap;
55     QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57 
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59 
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63         BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66         BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68                                          int64_t sector_num, int nb_sectors,
69                                          QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71                                          int64_t sector_num, int nb_sectors,
72                                          QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75     BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78     BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80                                                int64_t sector_num,
81                                                QEMUIOVector *qiov,
82                                                int nb_sectors,
83                                                BdrvRequestFlags flags,
84                                                BlockDriverCompletionFunc *cb,
85                                                void *opaque,
86                                                bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90 
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92     QTAILQ_HEAD_INITIALIZER(bdrv_states);
93 
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95     QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96 
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98     QLIST_HEAD_INITIALIZER(bdrv_drivers);
99 
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102 
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106     return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107              (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108             filename[1] == ':');
109 }
110 
111 int is_windows_drive(const char *filename)
112 {
113     if (is_windows_drive_prefix(filename) &&
114         filename[2] == '\0')
115         return 1;
116     if (strstart(filename, "\\\\.\\", NULL) ||
117         strstart(filename, "//./", NULL))
118         return 1;
119     return 0;
120 }
121 #endif
122 
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125                         ThrottleConfig *cfg)
126 {
127     int i;
128 
129     throttle_config(&bs->throttle_state, cfg);
130 
131     for (i = 0; i < 2; i++) {
132         qemu_co_enter_next(&bs->throttled_reqs[i]);
133     }
134 }
135 
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139     bool drained = false;
140     bool enabled = bs->io_limits_enabled;
141     int i;
142 
143     bs->io_limits_enabled = false;
144 
145     for (i = 0; i < 2; i++) {
146         while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147             drained = true;
148         }
149     }
150 
151     bs->io_limits_enabled = enabled;
152 
153     return drained;
154 }
155 
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158     bs->io_limits_enabled = false;
159 
160     bdrv_start_throttled_reqs(bs);
161 
162     throttle_destroy(&bs->throttle_state);
163 }
164 
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167     BlockDriverState *bs = opaque;
168     qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170 
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173     BlockDriverState *bs = opaque;
174     qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176 
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180     assert(!bs->io_limits_enabled);
181     throttle_init(&bs->throttle_state,
182                   bdrv_get_aio_context(bs),
183                   QEMU_CLOCK_VIRTUAL,
184                   bdrv_throttle_read_timer_cb,
185                   bdrv_throttle_write_timer_cb,
186                   bs);
187     bs->io_limits_enabled = true;
188 }
189 
190 /* This function makes an IO wait if needed
191  *
192  * @nb_sectors: the number of sectors of the IO
193  * @is_write:   is the IO a write
194  */
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196                                      unsigned int bytes,
197                                      bool is_write)
198 {
199     /* does this io must wait */
200     bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 
202     /* if must wait or any request of this type throttled queue the IO */
203     if (must_wait ||
204         !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205         qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
206     }
207 
208     /* the IO will be executed, do the accounting */
209     throttle_account(&bs->throttle_state, is_write, bytes);
210 
211 
212     /* if the next request must wait -> do nothing */
213     if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214         return;
215     }
216 
217     /* else queue next request for execution */
218     qemu_co_queue_next(&bs->throttled_reqs[is_write]);
219 }
220 
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 {
223     if (!bs || !bs->drv) {
224         /* 4k should be on the safe side */
225         return 4096;
226     }
227 
228     return bs->bl.opt_mem_alignment;
229 }
230 
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
233 {
234     const char *p;
235 
236 #ifdef _WIN32
237     if (is_windows_drive(path) ||
238         is_windows_drive_prefix(path)) {
239         return 0;
240     }
241     p = path + strcspn(path, ":/\\");
242 #else
243     p = path + strcspn(path, ":/");
244 #endif
245 
246     return *p == ':';
247 }
248 
249 int path_is_absolute(const char *path)
250 {
251 #ifdef _WIN32
252     /* specific case for names like: "\\.\d:" */
253     if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254         return 1;
255     }
256     return (*path == '/' || *path == '\\');
257 #else
258     return (*path == '/');
259 #endif
260 }
261 
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263    path to it by considering it is relative to base_path. URL are
264    supported. */
265 void path_combine(char *dest, int dest_size,
266                   const char *base_path,
267                   const char *filename)
268 {
269     const char *p, *p1;
270     int len;
271 
272     if (dest_size <= 0)
273         return;
274     if (path_is_absolute(filename)) {
275         pstrcpy(dest, dest_size, filename);
276     } else {
277         p = strchr(base_path, ':');
278         if (p)
279             p++;
280         else
281             p = base_path;
282         p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
284         {
285             const char *p2;
286             p2 = strrchr(base_path, '\\');
287             if (!p1 || p2 > p1)
288                 p1 = p2;
289         }
290 #endif
291         if (p1)
292             p1++;
293         else
294             p1 = base_path;
295         if (p1 > p)
296             p = p1;
297         len = p - base_path;
298         if (len > dest_size - 1)
299             len = dest_size - 1;
300         memcpy(dest, base_path, len);
301         dest[len] = '\0';
302         pstrcat(dest, dest_size, filename);
303     }
304 }
305 
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 {
308     if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309         pstrcpy(dest, sz, bs->backing_file);
310     } else {
311         path_combine(dest, sz, bs->filename, bs->backing_file);
312     }
313 }
314 
315 void bdrv_register(BlockDriver *bdrv)
316 {
317     /* Block drivers without coroutine functions need emulation */
318     if (!bdrv->bdrv_co_readv) {
319         bdrv->bdrv_co_readv = bdrv_co_readv_em;
320         bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 
322         /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323          * the block driver lacks aio we need to emulate that too.
324          */
325         if (!bdrv->bdrv_aio_readv) {
326             /* add AIO emulation layer */
327             bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328             bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
329         }
330     }
331 
332     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
333 }
334 
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
337 {
338     BlockDriverState *bs;
339     int i;
340 
341     if (bdrv_find(device_name)) {
342         error_setg(errp, "Device with id '%s' already exists",
343                    device_name);
344         return NULL;
345     }
346     if (bdrv_find_node(device_name)) {
347         error_setg(errp, "Device with node-name '%s' already exists",
348                    device_name);
349         return NULL;
350     }
351 
352     bs = g_malloc0(sizeof(BlockDriverState));
353     QLIST_INIT(&bs->dirty_bitmaps);
354     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355     if (device_name[0] != '\0') {
356         QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
357     }
358     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359         QLIST_INIT(&bs->op_blockers[i]);
360     }
361     bdrv_iostatus_disable(bs);
362     notifier_list_init(&bs->close_notifiers);
363     notifier_with_return_list_init(&bs->before_write_notifiers);
364     qemu_co_queue_init(&bs->throttled_reqs[0]);
365     qemu_co_queue_init(&bs->throttled_reqs[1]);
366     bs->refcnt = 1;
367     bs->aio_context = qemu_get_aio_context();
368 
369     return bs;
370 }
371 
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
373 {
374     notifier_list_add(&bs->close_notifiers, notify);
375 }
376 
377 BlockDriver *bdrv_find_format(const char *format_name)
378 {
379     BlockDriver *drv1;
380     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381         if (!strcmp(drv1->format_name, format_name)) {
382             return drv1;
383         }
384     }
385     return NULL;
386 }
387 
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
389 {
390     static const char *whitelist_rw[] = {
391         CONFIG_BDRV_RW_WHITELIST
392     };
393     static const char *whitelist_ro[] = {
394         CONFIG_BDRV_RO_WHITELIST
395     };
396     const char **p;
397 
398     if (!whitelist_rw[0] && !whitelist_ro[0]) {
399         return 1;               /* no whitelist, anything goes */
400     }
401 
402     for (p = whitelist_rw; *p; p++) {
403         if (!strcmp(drv->format_name, *p)) {
404             return 1;
405         }
406     }
407     if (read_only) {
408         for (p = whitelist_ro; *p; p++) {
409             if (!strcmp(drv->format_name, *p)) {
410                 return 1;
411             }
412         }
413     }
414     return 0;
415 }
416 
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418                                           bool read_only)
419 {
420     BlockDriver *drv = bdrv_find_format(format_name);
421     return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
422 }
423 
424 typedef struct CreateCo {
425     BlockDriver *drv;
426     char *filename;
427     QemuOpts *opts;
428     int ret;
429     Error *err;
430 } CreateCo;
431 
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
433 {
434     Error *local_err = NULL;
435     int ret;
436 
437     CreateCo *cco = opaque;
438     assert(cco->drv);
439 
440     ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441     if (local_err) {
442         error_propagate(&cco->err, local_err);
443     }
444     cco->ret = ret;
445 }
446 
447 int bdrv_create(BlockDriver *drv, const char* filename,
448                 QemuOpts *opts, Error **errp)
449 {
450     int ret;
451 
452     Coroutine *co;
453     CreateCo cco = {
454         .drv = drv,
455         .filename = g_strdup(filename),
456         .opts = opts,
457         .ret = NOT_DONE,
458         .err = NULL,
459     };
460 
461     if (!drv->bdrv_create) {
462         error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463         ret = -ENOTSUP;
464         goto out;
465     }
466 
467     if (qemu_in_coroutine()) {
468         /* Fast-path if already in coroutine context */
469         bdrv_create_co_entry(&cco);
470     } else {
471         co = qemu_coroutine_create(bdrv_create_co_entry);
472         qemu_coroutine_enter(co, &cco);
473         while (cco.ret == NOT_DONE) {
474             qemu_aio_wait();
475         }
476     }
477 
478     ret = cco.ret;
479     if (ret < 0) {
480         if (cco.err) {
481             error_propagate(errp, cco.err);
482         } else {
483             error_setg_errno(errp, -ret, "Could not create image");
484         }
485     }
486 
487 out:
488     g_free(cco.filename);
489     return ret;
490 }
491 
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
493 {
494     BlockDriver *drv;
495     Error *local_err = NULL;
496     int ret;
497 
498     drv = bdrv_find_protocol(filename, true);
499     if (drv == NULL) {
500         error_setg(errp, "Could not find protocol for file '%s'", filename);
501         return -ENOENT;
502     }
503 
504     ret = bdrv_create(drv, filename, opts, &local_err);
505     if (local_err) {
506         error_propagate(errp, local_err);
507     }
508     return ret;
509 }
510 
511 int bdrv_refresh_limits(BlockDriverState *bs)
512 {
513     BlockDriver *drv = bs->drv;
514 
515     memset(&bs->bl, 0, sizeof(bs->bl));
516 
517     if (!drv) {
518         return 0;
519     }
520 
521     /* Take some limits from the children as a default */
522     if (bs->file) {
523         bdrv_refresh_limits(bs->file);
524         bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
525         bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
526     } else {
527         bs->bl.opt_mem_alignment = 512;
528     }
529 
530     if (bs->backing_hd) {
531         bdrv_refresh_limits(bs->backing_hd);
532         bs->bl.opt_transfer_length =
533             MAX(bs->bl.opt_transfer_length,
534                 bs->backing_hd->bl.opt_transfer_length);
535         bs->bl.opt_mem_alignment =
536             MAX(bs->bl.opt_mem_alignment,
537                 bs->backing_hd->bl.opt_mem_alignment);
538     }
539 
540     /* Then let the driver override it */
541     if (drv->bdrv_refresh_limits) {
542         return drv->bdrv_refresh_limits(bs);
543     }
544 
545     return 0;
546 }
547 
548 /*
549  * Create a uniquely-named empty temporary file.
550  * Return 0 upon success, otherwise a negative errno value.
551  */
552 int get_tmp_filename(char *filename, int size)
553 {
554 #ifdef _WIN32
555     char temp_dir[MAX_PATH];
556     /* GetTempFileName requires that its output buffer (4th param)
557        have length MAX_PATH or greater.  */
558     assert(size >= MAX_PATH);
559     return (GetTempPath(MAX_PATH, temp_dir)
560             && GetTempFileName(temp_dir, "qem", 0, filename)
561             ? 0 : -GetLastError());
562 #else
563     int fd;
564     const char *tmpdir;
565     tmpdir = getenv("TMPDIR");
566     if (!tmpdir) {
567         tmpdir = "/var/tmp";
568     }
569     if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
570         return -EOVERFLOW;
571     }
572     fd = mkstemp(filename);
573     if (fd < 0) {
574         return -errno;
575     }
576     if (close(fd) != 0) {
577         unlink(filename);
578         return -errno;
579     }
580     return 0;
581 #endif
582 }
583 
584 /*
585  * Detect host devices. By convention, /dev/cdrom[N] is always
586  * recognized as a host CDROM.
587  */
588 static BlockDriver *find_hdev_driver(const char *filename)
589 {
590     int score_max = 0, score;
591     BlockDriver *drv = NULL, *d;
592 
593     QLIST_FOREACH(d, &bdrv_drivers, list) {
594         if (d->bdrv_probe_device) {
595             score = d->bdrv_probe_device(filename);
596             if (score > score_max) {
597                 score_max = score;
598                 drv = d;
599             }
600         }
601     }
602 
603     return drv;
604 }
605 
606 BlockDriver *bdrv_find_protocol(const char *filename,
607                                 bool allow_protocol_prefix)
608 {
609     BlockDriver *drv1;
610     char protocol[128];
611     int len;
612     const char *p;
613 
614     /* TODO Drivers without bdrv_file_open must be specified explicitly */
615 
616     /*
617      * XXX(hch): we really should not let host device detection
618      * override an explicit protocol specification, but moving this
619      * later breaks access to device names with colons in them.
620      * Thanks to the brain-dead persistent naming schemes on udev-
621      * based Linux systems those actually are quite common.
622      */
623     drv1 = find_hdev_driver(filename);
624     if (drv1) {
625         return drv1;
626     }
627 
628     if (!path_has_protocol(filename) || !allow_protocol_prefix) {
629         return bdrv_find_format("file");
630     }
631 
632     p = strchr(filename, ':');
633     assert(p != NULL);
634     len = p - filename;
635     if (len > sizeof(protocol) - 1)
636         len = sizeof(protocol) - 1;
637     memcpy(protocol, filename, len);
638     protocol[len] = '\0';
639     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
640         if (drv1->protocol_name &&
641             !strcmp(drv1->protocol_name, protocol)) {
642             return drv1;
643         }
644     }
645     return NULL;
646 }
647 
648 static int find_image_format(BlockDriverState *bs, const char *filename,
649                              BlockDriver **pdrv, Error **errp)
650 {
651     int score, score_max;
652     BlockDriver *drv1, *drv;
653     uint8_t buf[2048];
654     int ret = 0;
655 
656     /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657     if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
658         drv = bdrv_find_format("raw");
659         if (!drv) {
660             error_setg(errp, "Could not find raw image format");
661             ret = -ENOENT;
662         }
663         *pdrv = drv;
664         return ret;
665     }
666 
667     ret = bdrv_pread(bs, 0, buf, sizeof(buf));
668     if (ret < 0) {
669         error_setg_errno(errp, -ret, "Could not read image for determining its "
670                          "format");
671         *pdrv = NULL;
672         return ret;
673     }
674 
675     score_max = 0;
676     drv = NULL;
677     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
678         if (drv1->bdrv_probe) {
679             score = drv1->bdrv_probe(buf, ret, filename);
680             if (score > score_max) {
681                 score_max = score;
682                 drv = drv1;
683             }
684         }
685     }
686     if (!drv) {
687         error_setg(errp, "Could not determine image format: No compatible "
688                    "driver found");
689         ret = -ENOENT;
690     }
691     *pdrv = drv;
692     return ret;
693 }
694 
695 /**
696  * Set the current 'total_sectors' value
697  */
698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
699 {
700     BlockDriver *drv = bs->drv;
701 
702     /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
703     if (bs->sg)
704         return 0;
705 
706     /* query actual device if possible, otherwise just trust the hint */
707     if (drv->bdrv_getlength) {
708         int64_t length = drv->bdrv_getlength(bs);
709         if (length < 0) {
710             return length;
711         }
712         hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
713     }
714 
715     bs->total_sectors = hint;
716     return 0;
717 }
718 
719 /**
720  * Set open flags for a given discard mode
721  *
722  * Return 0 on success, -1 if the discard mode was invalid.
723  */
724 int bdrv_parse_discard_flags(const char *mode, int *flags)
725 {
726     *flags &= ~BDRV_O_UNMAP;
727 
728     if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
729         /* do nothing */
730     } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
731         *flags |= BDRV_O_UNMAP;
732     } else {
733         return -1;
734     }
735 
736     return 0;
737 }
738 
739 /**
740  * Set open flags for a given cache mode
741  *
742  * Return 0 on success, -1 if the cache mode was invalid.
743  */
744 int bdrv_parse_cache_flags(const char *mode, int *flags)
745 {
746     *flags &= ~BDRV_O_CACHE_MASK;
747 
748     if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
749         *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
750     } else if (!strcmp(mode, "directsync")) {
751         *flags |= BDRV_O_NOCACHE;
752     } else if (!strcmp(mode, "writeback")) {
753         *flags |= BDRV_O_CACHE_WB;
754     } else if (!strcmp(mode, "unsafe")) {
755         *flags |= BDRV_O_CACHE_WB;
756         *flags |= BDRV_O_NO_FLUSH;
757     } else if (!strcmp(mode, "writethrough")) {
758         /* this is the default */
759     } else {
760         return -1;
761     }
762 
763     return 0;
764 }
765 
766 /**
767  * The copy-on-read flag is actually a reference count so multiple users may
768  * use the feature without worrying about clobbering its previous state.
769  * Copy-on-read stays enabled until all users have called to disable it.
770  */
771 void bdrv_enable_copy_on_read(BlockDriverState *bs)
772 {
773     bs->copy_on_read++;
774 }
775 
776 void bdrv_disable_copy_on_read(BlockDriverState *bs)
777 {
778     assert(bs->copy_on_read > 0);
779     bs->copy_on_read--;
780 }
781 
782 /*
783  * Returns the flags that a temporary snapshot should get, based on the
784  * originally requested flags (the originally requested image will have flags
785  * like a backing file)
786  */
787 static int bdrv_temp_snapshot_flags(int flags)
788 {
789     return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
790 }
791 
792 /*
793  * Returns the flags that bs->file should get, based on the given flags for
794  * the parent BDS
795  */
796 static int bdrv_inherited_flags(int flags)
797 {
798     /* Enable protocol handling, disable format probing for bs->file */
799     flags |= BDRV_O_PROTOCOL;
800 
801     /* Our block drivers take care to send flushes and respect unmap policy,
802      * so we can enable both unconditionally on lower layers. */
803     flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
804 
805     /* Clear flags that only apply to the top layer */
806     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
807 
808     return flags;
809 }
810 
811 /*
812  * Returns the flags that bs->backing_hd should get, based on the given flags
813  * for the parent BDS
814  */
815 static int bdrv_backing_flags(int flags)
816 {
817     /* backing files always opened read-only */
818     flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
819 
820     /* snapshot=on is handled on the top layer */
821     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
822 
823     return flags;
824 }
825 
826 static int bdrv_open_flags(BlockDriverState *bs, int flags)
827 {
828     int open_flags = flags | BDRV_O_CACHE_WB;
829 
830     /*
831      * Clear flags that are internal to the block layer before opening the
832      * image.
833      */
834     open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
835 
836     /*
837      * Snapshots should be writable.
838      */
839     if (flags & BDRV_O_TEMPORARY) {
840         open_flags |= BDRV_O_RDWR;
841     }
842 
843     return open_flags;
844 }
845 
846 static void bdrv_assign_node_name(BlockDriverState *bs,
847                                   const char *node_name,
848                                   Error **errp)
849 {
850     if (!node_name) {
851         return;
852     }
853 
854     /* empty string node name is invalid */
855     if (node_name[0] == '\0') {
856         error_setg(errp, "Empty node name");
857         return;
858     }
859 
860     /* takes care of avoiding namespaces collisions */
861     if (bdrv_find(node_name)) {
862         error_setg(errp, "node-name=%s is conflicting with a device id",
863                    node_name);
864         return;
865     }
866 
867     /* takes care of avoiding duplicates node names */
868     if (bdrv_find_node(node_name)) {
869         error_setg(errp, "Duplicate node name");
870         return;
871     }
872 
873     /* copy node name into the bs and insert it into the graph list */
874     pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
875     QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
876 }
877 
878 /*
879  * Common part for opening disk images and files
880  *
881  * Removes all processed options from *options.
882  */
883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
884     QDict *options, int flags, BlockDriver *drv, Error **errp)
885 {
886     int ret, open_flags;
887     const char *filename;
888     const char *node_name = NULL;
889     Error *local_err = NULL;
890 
891     assert(drv != NULL);
892     assert(bs->file == NULL);
893     assert(options != NULL && bs->options != options);
894 
895     if (file != NULL) {
896         filename = file->filename;
897     } else {
898         filename = qdict_get_try_str(options, "filename");
899     }
900 
901     if (drv->bdrv_needs_filename && !filename) {
902         error_setg(errp, "The '%s' block driver requires a file name",
903                    drv->format_name);
904         return -EINVAL;
905     }
906 
907     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
908 
909     node_name = qdict_get_try_str(options, "node-name");
910     bdrv_assign_node_name(bs, node_name, &local_err);
911     if (local_err) {
912         error_propagate(errp, local_err);
913         return -EINVAL;
914     }
915     qdict_del(options, "node-name");
916 
917     /* bdrv_open() with directly using a protocol as drv. This layer is already
918      * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919      * and return immediately. */
920     if (file != NULL && drv->bdrv_file_open) {
921         bdrv_swap(file, bs);
922         return 0;
923     }
924 
925     bs->open_flags = flags;
926     bs->guest_block_size = 512;
927     bs->request_alignment = 512;
928     bs->zero_beyond_eof = true;
929     open_flags = bdrv_open_flags(bs, flags);
930     bs->read_only = !(open_flags & BDRV_O_RDWR);
931     bs->growable = !!(flags & BDRV_O_PROTOCOL);
932 
933     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
934         error_setg(errp,
935                    !bs->read_only && bdrv_is_whitelisted(drv, true)
936                         ? "Driver '%s' can only be used for read-only devices"
937                         : "Driver '%s' is not whitelisted",
938                    drv->format_name);
939         return -ENOTSUP;
940     }
941 
942     assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
943     if (flags & BDRV_O_COPY_ON_READ) {
944         if (!bs->read_only) {
945             bdrv_enable_copy_on_read(bs);
946         } else {
947             error_setg(errp, "Can't use copy-on-read on read-only device");
948             return -EINVAL;
949         }
950     }
951 
952     if (filename != NULL) {
953         pstrcpy(bs->filename, sizeof(bs->filename), filename);
954     } else {
955         bs->filename[0] = '\0';
956     }
957 
958     bs->drv = drv;
959     bs->opaque = g_malloc0(drv->instance_size);
960 
961     bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
962 
963     /* Open the image, either directly or using a protocol */
964     if (drv->bdrv_file_open) {
965         assert(file == NULL);
966         assert(!drv->bdrv_needs_filename || filename != NULL);
967         ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
968     } else {
969         if (file == NULL) {
970             error_setg(errp, "Can't use '%s' as a block driver for the "
971                        "protocol level", drv->format_name);
972             ret = -EINVAL;
973             goto free_and_fail;
974         }
975         bs->file = file;
976         ret = drv->bdrv_open(bs, options, open_flags, &local_err);
977     }
978 
979     if (ret < 0) {
980         if (local_err) {
981             error_propagate(errp, local_err);
982         } else if (bs->filename[0]) {
983             error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
984         } else {
985             error_setg_errno(errp, -ret, "Could not open image");
986         }
987         goto free_and_fail;
988     }
989 
990     ret = refresh_total_sectors(bs, bs->total_sectors);
991     if (ret < 0) {
992         error_setg_errno(errp, -ret, "Could not refresh total sector count");
993         goto free_and_fail;
994     }
995 
996     bdrv_refresh_limits(bs);
997     assert(bdrv_opt_mem_align(bs) != 0);
998     assert((bs->request_alignment != 0) || bs->sg);
999     return 0;
1000 
1001 free_and_fail:
1002     bs->file = NULL;
1003     g_free(bs->opaque);
1004     bs->opaque = NULL;
1005     bs->drv = NULL;
1006     return ret;
1007 }
1008 
1009 static QDict *parse_json_filename(const char *filename, Error **errp)
1010 {
1011     QObject *options_obj;
1012     QDict *options;
1013     int ret;
1014 
1015     ret = strstart(filename, "json:", &filename);
1016     assert(ret);
1017 
1018     options_obj = qobject_from_json(filename);
1019     if (!options_obj) {
1020         error_setg(errp, "Could not parse the JSON options");
1021         return NULL;
1022     }
1023 
1024     if (qobject_type(options_obj) != QTYPE_QDICT) {
1025         qobject_decref(options_obj);
1026         error_setg(errp, "Invalid JSON object given");
1027         return NULL;
1028     }
1029 
1030     options = qobject_to_qdict(options_obj);
1031     qdict_flatten(options);
1032 
1033     return options;
1034 }
1035 
1036 /*
1037  * Fills in default options for opening images and converts the legacy
1038  * filename/flags pair to option QDict entries.
1039  */
1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1041                              BlockDriver *drv, Error **errp)
1042 {
1043     const char *filename = *pfilename;
1044     const char *drvname;
1045     bool protocol = flags & BDRV_O_PROTOCOL;
1046     bool parse_filename = false;
1047     Error *local_err = NULL;
1048 
1049     /* Parse json: pseudo-protocol */
1050     if (filename && g_str_has_prefix(filename, "json:")) {
1051         QDict *json_options = parse_json_filename(filename, &local_err);
1052         if (local_err) {
1053             error_propagate(errp, local_err);
1054             return -EINVAL;
1055         }
1056 
1057         /* Options given in the filename have lower priority than options
1058          * specified directly */
1059         qdict_join(*options, json_options, false);
1060         QDECREF(json_options);
1061         *pfilename = filename = NULL;
1062     }
1063 
1064     /* Fetch the file name from the options QDict if necessary */
1065     if (protocol && filename) {
1066         if (!qdict_haskey(*options, "filename")) {
1067             qdict_put(*options, "filename", qstring_from_str(filename));
1068             parse_filename = true;
1069         } else {
1070             error_setg(errp, "Can't specify 'file' and 'filename' options at "
1071                              "the same time");
1072             return -EINVAL;
1073         }
1074     }
1075 
1076     /* Find the right block driver */
1077     filename = qdict_get_try_str(*options, "filename");
1078     drvname = qdict_get_try_str(*options, "driver");
1079 
1080     if (drv) {
1081         if (drvname) {
1082             error_setg(errp, "Driver specified twice");
1083             return -EINVAL;
1084         }
1085         drvname = drv->format_name;
1086         qdict_put(*options, "driver", qstring_from_str(drvname));
1087     } else {
1088         if (!drvname && protocol) {
1089             if (filename) {
1090                 drv = bdrv_find_protocol(filename, parse_filename);
1091                 if (!drv) {
1092                     error_setg(errp, "Unknown protocol");
1093                     return -EINVAL;
1094                 }
1095 
1096                 drvname = drv->format_name;
1097                 qdict_put(*options, "driver", qstring_from_str(drvname));
1098             } else {
1099                 error_setg(errp, "Must specify either driver or file");
1100                 return -EINVAL;
1101             }
1102         } else if (drvname) {
1103             drv = bdrv_find_format(drvname);
1104             if (!drv) {
1105                 error_setg(errp, "Unknown driver '%s'", drvname);
1106                 return -ENOENT;
1107             }
1108         }
1109     }
1110 
1111     assert(drv || !protocol);
1112 
1113     /* Driver-specific filename parsing */
1114     if (drv && drv->bdrv_parse_filename && parse_filename) {
1115         drv->bdrv_parse_filename(filename, *options, &local_err);
1116         if (local_err) {
1117             error_propagate(errp, local_err);
1118             return -EINVAL;
1119         }
1120 
1121         if (!drv->bdrv_needs_filename) {
1122             qdict_del(*options, "filename");
1123         }
1124     }
1125 
1126     return 0;
1127 }
1128 
1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1130 {
1131 
1132     if (bs->backing_hd) {
1133         assert(bs->backing_blocker);
1134         bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1135     } else if (backing_hd) {
1136         error_setg(&bs->backing_blocker,
1137                    "device is used as backing hd of '%s'",
1138                    bs->device_name);
1139     }
1140 
1141     bs->backing_hd = backing_hd;
1142     if (!backing_hd) {
1143         error_free(bs->backing_blocker);
1144         bs->backing_blocker = NULL;
1145         goto out;
1146     }
1147     bs->open_flags &= ~BDRV_O_NO_BACKING;
1148     pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1149     pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1150             backing_hd->drv ? backing_hd->drv->format_name : "");
1151 
1152     bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1153     /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154     bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1155                     bs->backing_blocker);
1156 out:
1157     bdrv_refresh_limits(bs);
1158 }
1159 
1160 /*
1161  * Opens the backing file for a BlockDriverState if not yet open
1162  *
1163  * options is a QDict of options to pass to the block drivers, or NULL for an
1164  * empty set of options. The reference to the QDict is transferred to this
1165  * function (even on failure), so if the caller intends to reuse the dictionary,
1166  * it needs to use QINCREF() before calling bdrv_file_open.
1167  */
1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1169 {
1170     char *backing_filename = g_malloc0(PATH_MAX);
1171     int ret = 0;
1172     BlockDriver *back_drv = NULL;
1173     BlockDriverState *backing_hd;
1174     Error *local_err = NULL;
1175 
1176     if (bs->backing_hd != NULL) {
1177         QDECREF(options);
1178         goto free_exit;
1179     }
1180 
1181     /* NULL means an empty set of options */
1182     if (options == NULL) {
1183         options = qdict_new();
1184     }
1185 
1186     bs->open_flags &= ~BDRV_O_NO_BACKING;
1187     if (qdict_haskey(options, "file.filename")) {
1188         backing_filename[0] = '\0';
1189     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1190         QDECREF(options);
1191         goto free_exit;
1192     } else {
1193         bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1194     }
1195 
1196     if (!bs->drv || !bs->drv->supports_backing) {
1197         ret = -EINVAL;
1198         error_setg(errp, "Driver doesn't support backing files");
1199         QDECREF(options);
1200         goto free_exit;
1201     }
1202 
1203     backing_hd = bdrv_new("", errp);
1204 
1205     if (bs->backing_format[0] != '\0') {
1206         back_drv = bdrv_find_format(bs->backing_format);
1207     }
1208 
1209     assert(bs->backing_hd == NULL);
1210     ret = bdrv_open(&backing_hd,
1211                     *backing_filename ? backing_filename : NULL, NULL, options,
1212                     bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1213     if (ret < 0) {
1214         bdrv_unref(backing_hd);
1215         backing_hd = NULL;
1216         bs->open_flags |= BDRV_O_NO_BACKING;
1217         error_setg(errp, "Could not open backing file: %s",
1218                    error_get_pretty(local_err));
1219         error_free(local_err);
1220         goto free_exit;
1221     }
1222     bdrv_set_backing_hd(bs, backing_hd);
1223 
1224 free_exit:
1225     g_free(backing_filename);
1226     return ret;
1227 }
1228 
1229 /*
1230  * Opens a disk image whose options are given as BlockdevRef in another block
1231  * device's options.
1232  *
1233  * If allow_none is true, no image will be opened if filename is false and no
1234  * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1235  *
1236  * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237  * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238  * itself, all options starting with "${bdref_key}." are considered part of the
1239  * BlockdevRef.
1240  *
1241  * The BlockdevRef will be removed from the options QDict.
1242  *
1243  * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1244  */
1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1246                     QDict *options, const char *bdref_key, int flags,
1247                     bool allow_none, Error **errp)
1248 {
1249     QDict *image_options;
1250     int ret;
1251     char *bdref_key_dot;
1252     const char *reference;
1253 
1254     assert(pbs);
1255     assert(*pbs == NULL);
1256 
1257     bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1258     qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1259     g_free(bdref_key_dot);
1260 
1261     reference = qdict_get_try_str(options, bdref_key);
1262     if (!filename && !reference && !qdict_size(image_options)) {
1263         if (allow_none) {
1264             ret = 0;
1265         } else {
1266             error_setg(errp, "A block device must be specified for \"%s\"",
1267                        bdref_key);
1268             ret = -EINVAL;
1269         }
1270         QDECREF(image_options);
1271         goto done;
1272     }
1273 
1274     ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1275 
1276 done:
1277     qdict_del(options, bdref_key);
1278     return ret;
1279 }
1280 
1281 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1282 {
1283     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284     char *tmp_filename = g_malloc0(PATH_MAX + 1);
1285     int64_t total_size;
1286     BlockDriver *bdrv_qcow2;
1287     QemuOpts *opts = NULL;
1288     QDict *snapshot_options;
1289     BlockDriverState *bs_snapshot;
1290     Error *local_err;
1291     int ret;
1292 
1293     /* if snapshot, we create a temporary backing file and open it
1294        instead of opening 'filename' directly */
1295 
1296     /* Get the required size from the image */
1297     total_size = bdrv_getlength(bs);
1298     if (total_size < 0) {
1299         ret = total_size;
1300         error_setg_errno(errp, -total_size, "Could not get image size");
1301         goto out;
1302     }
1303     total_size &= BDRV_SECTOR_MASK;
1304 
1305     /* Create the temporary image */
1306     ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1307     if (ret < 0) {
1308         error_setg_errno(errp, -ret, "Could not get temporary filename");
1309         goto out;
1310     }
1311 
1312     bdrv_qcow2 = bdrv_find_format("qcow2");
1313     opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1314                             &error_abort);
1315     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1316     ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1317     qemu_opts_del(opts);
1318     if (ret < 0) {
1319         error_setg_errno(errp, -ret, "Could not create temporary overlay "
1320                          "'%s': %s", tmp_filename,
1321                          error_get_pretty(local_err));
1322         error_free(local_err);
1323         goto out;
1324     }
1325 
1326     /* Prepare a new options QDict for the temporary file */
1327     snapshot_options = qdict_new();
1328     qdict_put(snapshot_options, "file.driver",
1329               qstring_from_str("file"));
1330     qdict_put(snapshot_options, "file.filename",
1331               qstring_from_str(tmp_filename));
1332 
1333     bs_snapshot = bdrv_new("", &error_abort);
1334 
1335     ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1336                     flags, bdrv_qcow2, &local_err);
1337     if (ret < 0) {
1338         error_propagate(errp, local_err);
1339         goto out;
1340     }
1341 
1342     bdrv_append(bs_snapshot, bs);
1343 
1344 out:
1345     g_free(tmp_filename);
1346     return ret;
1347 }
1348 
1349 /*
1350  * Opens a disk image (raw, qcow2, vmdk, ...)
1351  *
1352  * options is a QDict of options to pass to the block drivers, or NULL for an
1353  * empty set of options. The reference to the QDict belongs to the block layer
1354  * after the call (even on failure), so if the caller intends to reuse the
1355  * dictionary, it needs to use QINCREF() before calling bdrv_open.
1356  *
1357  * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1358  * If it is not NULL, the referenced BDS will be reused.
1359  *
1360  * The reference parameter may be used to specify an existing block device which
1361  * should be opened. If specified, neither options nor a filename may be given,
1362  * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1363  */
1364 int bdrv_open(BlockDriverState **pbs, const char *filename,
1365               const char *reference, QDict *options, int flags,
1366               BlockDriver *drv, Error **errp)
1367 {
1368     int ret;
1369     BlockDriverState *file = NULL, *bs;
1370     const char *drvname;
1371     Error *local_err = NULL;
1372     int snapshot_flags = 0;
1373 
1374     assert(pbs);
1375 
1376     if (reference) {
1377         bool options_non_empty = options ? qdict_size(options) : false;
1378         QDECREF(options);
1379 
1380         if (*pbs) {
1381             error_setg(errp, "Cannot reuse an existing BDS when referencing "
1382                        "another block device");
1383             return -EINVAL;
1384         }
1385 
1386         if (filename || options_non_empty) {
1387             error_setg(errp, "Cannot reference an existing block device with "
1388                        "additional options or a new filename");
1389             return -EINVAL;
1390         }
1391 
1392         bs = bdrv_lookup_bs(reference, reference, errp);
1393         if (!bs) {
1394             return -ENODEV;
1395         }
1396         bdrv_ref(bs);
1397         *pbs = bs;
1398         return 0;
1399     }
1400 
1401     if (*pbs) {
1402         bs = *pbs;
1403     } else {
1404         bs = bdrv_new("", &error_abort);
1405     }
1406 
1407     /* NULL means an empty set of options */
1408     if (options == NULL) {
1409         options = qdict_new();
1410     }
1411 
1412     ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1413     if (local_err) {
1414         goto fail;
1415     }
1416 
1417     /* Find the right image format driver */
1418     drv = NULL;
1419     drvname = qdict_get_try_str(options, "driver");
1420     if (drvname) {
1421         drv = bdrv_find_format(drvname);
1422         qdict_del(options, "driver");
1423         if (!drv) {
1424             error_setg(errp, "Unknown driver: '%s'", drvname);
1425             ret = -EINVAL;
1426             goto fail;
1427         }
1428     }
1429 
1430     assert(drvname || !(flags & BDRV_O_PROTOCOL));
1431     if (drv && !drv->bdrv_file_open) {
1432         /* If the user explicitly wants a format driver here, we'll need to add
1433          * another layer for the protocol in bs->file */
1434         flags &= ~BDRV_O_PROTOCOL;
1435     }
1436 
1437     bs->options = options;
1438     options = qdict_clone_shallow(options);
1439 
1440     /* Open image file without format layer */
1441     if ((flags & BDRV_O_PROTOCOL) == 0) {
1442         if (flags & BDRV_O_RDWR) {
1443             flags |= BDRV_O_ALLOW_RDWR;
1444         }
1445         if (flags & BDRV_O_SNAPSHOT) {
1446             snapshot_flags = bdrv_temp_snapshot_flags(flags);
1447             flags = bdrv_backing_flags(flags);
1448         }
1449 
1450         assert(file == NULL);
1451         ret = bdrv_open_image(&file, filename, options, "file",
1452                               bdrv_inherited_flags(flags),
1453                               true, &local_err);
1454         if (ret < 0) {
1455             goto fail;
1456         }
1457     }
1458 
1459     /* Image format probing */
1460     if (!drv && file) {
1461         ret = find_image_format(file, filename, &drv, &local_err);
1462         if (ret < 0) {
1463             goto fail;
1464         }
1465     } else if (!drv) {
1466         error_setg(errp, "Must specify either driver or file");
1467         ret = -EINVAL;
1468         goto fail;
1469     }
1470 
1471     /* Open the image */
1472     ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1473     if (ret < 0) {
1474         goto fail;
1475     }
1476 
1477     if (file && (bs->file != file)) {
1478         bdrv_unref(file);
1479         file = NULL;
1480     }
1481 
1482     /* If there is a backing file, use it */
1483     if ((flags & BDRV_O_NO_BACKING) == 0) {
1484         QDict *backing_options;
1485 
1486         qdict_extract_subqdict(options, &backing_options, "backing.");
1487         ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1488         if (ret < 0) {
1489             goto close_and_fail;
1490         }
1491     }
1492 
1493     /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1494      * temporary snapshot afterwards. */
1495     if (snapshot_flags) {
1496         ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1497         if (local_err) {
1498             goto close_and_fail;
1499         }
1500     }
1501 
1502     /* Check if any unknown options were used */
1503     if (options && (qdict_size(options) != 0)) {
1504         const QDictEntry *entry = qdict_first(options);
1505         if (flags & BDRV_O_PROTOCOL) {
1506             error_setg(errp, "Block protocol '%s' doesn't support the option "
1507                        "'%s'", drv->format_name, entry->key);
1508         } else {
1509             error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1510                        "support the option '%s'", drv->format_name,
1511                        bs->device_name, entry->key);
1512         }
1513 
1514         ret = -EINVAL;
1515         goto close_and_fail;
1516     }
1517 
1518     if (!bdrv_key_required(bs)) {
1519         bdrv_dev_change_media_cb(bs, true);
1520     } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1521                && !runstate_check(RUN_STATE_INMIGRATE)
1522                && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1523         error_setg(errp,
1524                    "Guest must be stopped for opening of encrypted image");
1525         ret = -EBUSY;
1526         goto close_and_fail;
1527     }
1528 
1529     QDECREF(options);
1530     *pbs = bs;
1531     return 0;
1532 
1533 fail:
1534     if (file != NULL) {
1535         bdrv_unref(file);
1536     }
1537     QDECREF(bs->options);
1538     QDECREF(options);
1539     bs->options = NULL;
1540     if (!*pbs) {
1541         /* If *pbs is NULL, a new BDS has been created in this function and
1542            needs to be freed now. Otherwise, it does not need to be closed,
1543            since it has not really been opened yet. */
1544         bdrv_unref(bs);
1545     }
1546     if (local_err) {
1547         error_propagate(errp, local_err);
1548     }
1549     return ret;
1550 
1551 close_and_fail:
1552     /* See fail path, but now the BDS has to be always closed */
1553     if (*pbs) {
1554         bdrv_close(bs);
1555     } else {
1556         bdrv_unref(bs);
1557     }
1558     QDECREF(options);
1559     if (local_err) {
1560         error_propagate(errp, local_err);
1561     }
1562     return ret;
1563 }
1564 
1565 typedef struct BlockReopenQueueEntry {
1566      bool prepared;
1567      BDRVReopenState state;
1568      QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1569 } BlockReopenQueueEntry;
1570 
1571 /*
1572  * Adds a BlockDriverState to a simple queue for an atomic, transactional
1573  * reopen of multiple devices.
1574  *
1575  * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1576  * already performed, or alternatively may be NULL a new BlockReopenQueue will
1577  * be created and initialized. This newly created BlockReopenQueue should be
1578  * passed back in for subsequent calls that are intended to be of the same
1579  * atomic 'set'.
1580  *
1581  * bs is the BlockDriverState to add to the reopen queue.
1582  *
1583  * flags contains the open flags for the associated bs
1584  *
1585  * returns a pointer to bs_queue, which is either the newly allocated
1586  * bs_queue, or the existing bs_queue being used.
1587  *
1588  */
1589 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1590                                     BlockDriverState *bs, int flags)
1591 {
1592     assert(bs != NULL);
1593 
1594     BlockReopenQueueEntry *bs_entry;
1595     if (bs_queue == NULL) {
1596         bs_queue = g_new0(BlockReopenQueue, 1);
1597         QSIMPLEQ_INIT(bs_queue);
1598     }
1599 
1600     /* bdrv_open() masks this flag out */
1601     flags &= ~BDRV_O_PROTOCOL;
1602 
1603     if (bs->file) {
1604         bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1605     }
1606 
1607     bs_entry = g_new0(BlockReopenQueueEntry, 1);
1608     QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1609 
1610     bs_entry->state.bs = bs;
1611     bs_entry->state.flags = flags;
1612 
1613     return bs_queue;
1614 }
1615 
1616 /*
1617  * Reopen multiple BlockDriverStates atomically & transactionally.
1618  *
1619  * The queue passed in (bs_queue) must have been built up previous
1620  * via bdrv_reopen_queue().
1621  *
1622  * Reopens all BDS specified in the queue, with the appropriate
1623  * flags.  All devices are prepared for reopen, and failure of any
1624  * device will cause all device changes to be abandonded, and intermediate
1625  * data cleaned up.
1626  *
1627  * If all devices prepare successfully, then the changes are committed
1628  * to all devices.
1629  *
1630  */
1631 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1632 {
1633     int ret = -1;
1634     BlockReopenQueueEntry *bs_entry, *next;
1635     Error *local_err = NULL;
1636 
1637     assert(bs_queue != NULL);
1638 
1639     bdrv_drain_all();
1640 
1641     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1642         if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1643             error_propagate(errp, local_err);
1644             goto cleanup;
1645         }
1646         bs_entry->prepared = true;
1647     }
1648 
1649     /* If we reach this point, we have success and just need to apply the
1650      * changes
1651      */
1652     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1653         bdrv_reopen_commit(&bs_entry->state);
1654     }
1655 
1656     ret = 0;
1657 
1658 cleanup:
1659     QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1660         if (ret && bs_entry->prepared) {
1661             bdrv_reopen_abort(&bs_entry->state);
1662         }
1663         g_free(bs_entry);
1664     }
1665     g_free(bs_queue);
1666     return ret;
1667 }
1668 
1669 
1670 /* Reopen a single BlockDriverState with the specified flags. */
1671 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1672 {
1673     int ret = -1;
1674     Error *local_err = NULL;
1675     BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1676 
1677     ret = bdrv_reopen_multiple(queue, &local_err);
1678     if (local_err != NULL) {
1679         error_propagate(errp, local_err);
1680     }
1681     return ret;
1682 }
1683 
1684 
1685 /*
1686  * Prepares a BlockDriverState for reopen. All changes are staged in the
1687  * 'opaque' field of the BDRVReopenState, which is used and allocated by
1688  * the block driver layer .bdrv_reopen_prepare()
1689  *
1690  * bs is the BlockDriverState to reopen
1691  * flags are the new open flags
1692  * queue is the reopen queue
1693  *
1694  * Returns 0 on success, non-zero on error.  On error errp will be set
1695  * as well.
1696  *
1697  * On failure, bdrv_reopen_abort() will be called to clean up any data.
1698  * It is the responsibility of the caller to then call the abort() or
1699  * commit() for any other BDS that have been left in a prepare() state
1700  *
1701  */
1702 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1703                         Error **errp)
1704 {
1705     int ret = -1;
1706     Error *local_err = NULL;
1707     BlockDriver *drv;
1708 
1709     assert(reopen_state != NULL);
1710     assert(reopen_state->bs->drv != NULL);
1711     drv = reopen_state->bs->drv;
1712 
1713     /* if we are to stay read-only, do not allow permission change
1714      * to r/w */
1715     if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1716         reopen_state->flags & BDRV_O_RDWR) {
1717         error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1718                   reopen_state->bs->device_name);
1719         goto error;
1720     }
1721 
1722 
1723     ret = bdrv_flush(reopen_state->bs);
1724     if (ret) {
1725         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1726                   strerror(-ret));
1727         goto error;
1728     }
1729 
1730     if (drv->bdrv_reopen_prepare) {
1731         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1732         if (ret) {
1733             if (local_err != NULL) {
1734                 error_propagate(errp, local_err);
1735             } else {
1736                 error_setg(errp, "failed while preparing to reopen image '%s'",
1737                            reopen_state->bs->filename);
1738             }
1739             goto error;
1740         }
1741     } else {
1742         /* It is currently mandatory to have a bdrv_reopen_prepare()
1743          * handler for each supported drv. */
1744         error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1745                   drv->format_name, reopen_state->bs->device_name,
1746                  "reopening of file");
1747         ret = -1;
1748         goto error;
1749     }
1750 
1751     ret = 0;
1752 
1753 error:
1754     return ret;
1755 }
1756 
1757 /*
1758  * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1759  * makes them final by swapping the staging BlockDriverState contents into
1760  * the active BlockDriverState contents.
1761  */
1762 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1763 {
1764     BlockDriver *drv;
1765 
1766     assert(reopen_state != NULL);
1767     drv = reopen_state->bs->drv;
1768     assert(drv != NULL);
1769 
1770     /* If there are any driver level actions to take */
1771     if (drv->bdrv_reopen_commit) {
1772         drv->bdrv_reopen_commit(reopen_state);
1773     }
1774 
1775     /* set BDS specific flags now */
1776     reopen_state->bs->open_flags         = reopen_state->flags;
1777     reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1778                                               BDRV_O_CACHE_WB);
1779     reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1780 
1781     bdrv_refresh_limits(reopen_state->bs);
1782 }
1783 
1784 /*
1785  * Abort the reopen, and delete and free the staged changes in
1786  * reopen_state
1787  */
1788 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1789 {
1790     BlockDriver *drv;
1791 
1792     assert(reopen_state != NULL);
1793     drv = reopen_state->bs->drv;
1794     assert(drv != NULL);
1795 
1796     if (drv->bdrv_reopen_abort) {
1797         drv->bdrv_reopen_abort(reopen_state);
1798     }
1799 }
1800 
1801 
1802 void bdrv_close(BlockDriverState *bs)
1803 {
1804     if (bs->job) {
1805         block_job_cancel_sync(bs->job);
1806     }
1807     bdrv_drain_all(); /* complete I/O */
1808     bdrv_flush(bs);
1809     bdrv_drain_all(); /* in case flush left pending I/O */
1810     notifier_list_notify(&bs->close_notifiers, bs);
1811 
1812     if (bs->drv) {
1813         if (bs->backing_hd) {
1814             BlockDriverState *backing_hd = bs->backing_hd;
1815             bdrv_set_backing_hd(bs, NULL);
1816             bdrv_unref(backing_hd);
1817         }
1818         bs->drv->bdrv_close(bs);
1819         g_free(bs->opaque);
1820         bs->opaque = NULL;
1821         bs->drv = NULL;
1822         bs->copy_on_read = 0;
1823         bs->backing_file[0] = '\0';
1824         bs->backing_format[0] = '\0';
1825         bs->total_sectors = 0;
1826         bs->encrypted = 0;
1827         bs->valid_key = 0;
1828         bs->sg = 0;
1829         bs->growable = 0;
1830         bs->zero_beyond_eof = false;
1831         QDECREF(bs->options);
1832         bs->options = NULL;
1833 
1834         if (bs->file != NULL) {
1835             bdrv_unref(bs->file);
1836             bs->file = NULL;
1837         }
1838     }
1839 
1840     bdrv_dev_change_media_cb(bs, false);
1841 
1842     /*throttling disk I/O limits*/
1843     if (bs->io_limits_enabled) {
1844         bdrv_io_limits_disable(bs);
1845     }
1846 }
1847 
1848 void bdrv_close_all(void)
1849 {
1850     BlockDriverState *bs;
1851 
1852     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1853         AioContext *aio_context = bdrv_get_aio_context(bs);
1854 
1855         aio_context_acquire(aio_context);
1856         bdrv_close(bs);
1857         aio_context_release(aio_context);
1858     }
1859 }
1860 
1861 /* Check if any requests are in-flight (including throttled requests) */
1862 static bool bdrv_requests_pending(BlockDriverState *bs)
1863 {
1864     if (!QLIST_EMPTY(&bs->tracked_requests)) {
1865         return true;
1866     }
1867     if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1868         return true;
1869     }
1870     if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1871         return true;
1872     }
1873     if (bs->file && bdrv_requests_pending(bs->file)) {
1874         return true;
1875     }
1876     if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1877         return true;
1878     }
1879     return false;
1880 }
1881 
1882 /*
1883  * Wait for pending requests to complete across all BlockDriverStates
1884  *
1885  * This function does not flush data to disk, use bdrv_flush_all() for that
1886  * after calling this function.
1887  *
1888  * Note that completion of an asynchronous I/O operation can trigger any
1889  * number of other I/O operations on other devices---for example a coroutine
1890  * can be arbitrarily complex and a constant flow of I/O can come until the
1891  * coroutine is complete.  Because of this, it is not possible to have a
1892  * function to drain a single device's I/O queue.
1893  */
1894 void bdrv_drain_all(void)
1895 {
1896     /* Always run first iteration so any pending completion BHs run */
1897     bool busy = true;
1898     BlockDriverState *bs;
1899 
1900     while (busy) {
1901         busy = false;
1902 
1903         QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1904             AioContext *aio_context = bdrv_get_aio_context(bs);
1905             bool bs_busy;
1906 
1907             aio_context_acquire(aio_context);
1908             bdrv_flush_io_queue(bs);
1909             bdrv_start_throttled_reqs(bs);
1910             bs_busy = bdrv_requests_pending(bs);
1911             bs_busy |= aio_poll(aio_context, bs_busy);
1912             aio_context_release(aio_context);
1913 
1914             busy |= bs_busy;
1915         }
1916     }
1917 }
1918 
1919 /* make a BlockDriverState anonymous by removing from bdrv_state and
1920  * graph_bdrv_state list.
1921    Also, NULL terminate the device_name to prevent double remove */
1922 void bdrv_make_anon(BlockDriverState *bs)
1923 {
1924     if (bs->device_name[0] != '\0') {
1925         QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1926     }
1927     bs->device_name[0] = '\0';
1928     if (bs->node_name[0] != '\0') {
1929         QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1930     }
1931     bs->node_name[0] = '\0';
1932 }
1933 
1934 static void bdrv_rebind(BlockDriverState *bs)
1935 {
1936     if (bs->drv && bs->drv->bdrv_rebind) {
1937         bs->drv->bdrv_rebind(bs);
1938     }
1939 }
1940 
1941 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1942                                      BlockDriverState *bs_src)
1943 {
1944     /* move some fields that need to stay attached to the device */
1945 
1946     /* dev info */
1947     bs_dest->dev_ops            = bs_src->dev_ops;
1948     bs_dest->dev_opaque         = bs_src->dev_opaque;
1949     bs_dest->dev                = bs_src->dev;
1950     bs_dest->guest_block_size   = bs_src->guest_block_size;
1951     bs_dest->copy_on_read       = bs_src->copy_on_read;
1952 
1953     bs_dest->enable_write_cache = bs_src->enable_write_cache;
1954 
1955     /* i/o throttled req */
1956     memcpy(&bs_dest->throttle_state,
1957            &bs_src->throttle_state,
1958            sizeof(ThrottleState));
1959     bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
1960     bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
1961     bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
1962 
1963     /* r/w error */
1964     bs_dest->on_read_error      = bs_src->on_read_error;
1965     bs_dest->on_write_error     = bs_src->on_write_error;
1966 
1967     /* i/o status */
1968     bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
1969     bs_dest->iostatus           = bs_src->iostatus;
1970 
1971     /* dirty bitmap */
1972     bs_dest->dirty_bitmaps      = bs_src->dirty_bitmaps;
1973 
1974     /* reference count */
1975     bs_dest->refcnt             = bs_src->refcnt;
1976 
1977     /* job */
1978     bs_dest->job                = bs_src->job;
1979 
1980     /* keep the same entry in bdrv_states */
1981     pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1982             bs_src->device_name);
1983     bs_dest->device_list = bs_src->device_list;
1984     memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1985            sizeof(bs_dest->op_blockers));
1986 }
1987 
1988 /*
1989  * Swap bs contents for two image chains while they are live,
1990  * while keeping required fields on the BlockDriverState that is
1991  * actually attached to a device.
1992  *
1993  * This will modify the BlockDriverState fields, and swap contents
1994  * between bs_new and bs_old. Both bs_new and bs_old are modified.
1995  *
1996  * bs_new is required to be anonymous.
1997  *
1998  * This function does not create any image files.
1999  */
2000 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2001 {
2002     BlockDriverState tmp;
2003 
2004     /* The code needs to swap the node_name but simply swapping node_list won't
2005      * work so first remove the nodes from the graph list, do the swap then
2006      * insert them back if needed.
2007      */
2008     if (bs_new->node_name[0] != '\0') {
2009         QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2010     }
2011     if (bs_old->node_name[0] != '\0') {
2012         QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2013     }
2014 
2015     /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2016     assert(bs_new->device_name[0] == '\0');
2017     assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2018     assert(bs_new->job == NULL);
2019     assert(bs_new->dev == NULL);
2020     assert(bs_new->io_limits_enabled == false);
2021     assert(!throttle_have_timer(&bs_new->throttle_state));
2022 
2023     tmp = *bs_new;
2024     *bs_new = *bs_old;
2025     *bs_old = tmp;
2026 
2027     /* there are some fields that should not be swapped, move them back */
2028     bdrv_move_feature_fields(&tmp, bs_old);
2029     bdrv_move_feature_fields(bs_old, bs_new);
2030     bdrv_move_feature_fields(bs_new, &tmp);
2031 
2032     /* bs_new shouldn't be in bdrv_states even after the swap!  */
2033     assert(bs_new->device_name[0] == '\0');
2034 
2035     /* Check a few fields that should remain attached to the device */
2036     assert(bs_new->dev == NULL);
2037     assert(bs_new->job == NULL);
2038     assert(bs_new->io_limits_enabled == false);
2039     assert(!throttle_have_timer(&bs_new->throttle_state));
2040 
2041     /* insert the nodes back into the graph node list if needed */
2042     if (bs_new->node_name[0] != '\0') {
2043         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2044     }
2045     if (bs_old->node_name[0] != '\0') {
2046         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2047     }
2048 
2049     bdrv_rebind(bs_new);
2050     bdrv_rebind(bs_old);
2051 }
2052 
2053 /*
2054  * Add new bs contents at the top of an image chain while the chain is
2055  * live, while keeping required fields on the top layer.
2056  *
2057  * This will modify the BlockDriverState fields, and swap contents
2058  * between bs_new and bs_top. Both bs_new and bs_top are modified.
2059  *
2060  * bs_new is required to be anonymous.
2061  *
2062  * This function does not create any image files.
2063  */
2064 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2065 {
2066     bdrv_swap(bs_new, bs_top);
2067 
2068     /* The contents of 'tmp' will become bs_top, as we are
2069      * swapping bs_new and bs_top contents. */
2070     bdrv_set_backing_hd(bs_top, bs_new);
2071 }
2072 
2073 static void bdrv_delete(BlockDriverState *bs)
2074 {
2075     assert(!bs->dev);
2076     assert(!bs->job);
2077     assert(bdrv_op_blocker_is_empty(bs));
2078     assert(!bs->refcnt);
2079     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2080 
2081     bdrv_close(bs);
2082 
2083     /* remove from list, if necessary */
2084     bdrv_make_anon(bs);
2085 
2086     g_free(bs);
2087 }
2088 
2089 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2090 /* TODO change to DeviceState *dev when all users are qdevified */
2091 {
2092     if (bs->dev) {
2093         return -EBUSY;
2094     }
2095     bs->dev = dev;
2096     bdrv_iostatus_reset(bs);
2097     return 0;
2098 }
2099 
2100 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2101 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2102 {
2103     if (bdrv_attach_dev(bs, dev) < 0) {
2104         abort();
2105     }
2106 }
2107 
2108 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2109 /* TODO change to DeviceState *dev when all users are qdevified */
2110 {
2111     assert(bs->dev == dev);
2112     bs->dev = NULL;
2113     bs->dev_ops = NULL;
2114     bs->dev_opaque = NULL;
2115     bs->guest_block_size = 512;
2116 }
2117 
2118 /* TODO change to return DeviceState * when all users are qdevified */
2119 void *bdrv_get_attached_dev(BlockDriverState *bs)
2120 {
2121     return bs->dev;
2122 }
2123 
2124 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2125                       void *opaque)
2126 {
2127     bs->dev_ops = ops;
2128     bs->dev_opaque = opaque;
2129 }
2130 
2131 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2132 {
2133     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2134         bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2135         bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2136         if (tray_was_closed) {
2137             /* tray open */
2138             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2139                                               true, &error_abort);
2140         }
2141         if (load) {
2142             /* tray close */
2143             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2144                                               false, &error_abort);
2145         }
2146     }
2147 }
2148 
2149 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2150 {
2151     return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2152 }
2153 
2154 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2155 {
2156     if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2157         bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2158     }
2159 }
2160 
2161 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2162 {
2163     if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2164         return bs->dev_ops->is_tray_open(bs->dev_opaque);
2165     }
2166     return false;
2167 }
2168 
2169 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2170 {
2171     if (bs->dev_ops && bs->dev_ops->resize_cb) {
2172         bs->dev_ops->resize_cb(bs->dev_opaque);
2173     }
2174 }
2175 
2176 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2177 {
2178     if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2179         return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2180     }
2181     return false;
2182 }
2183 
2184 /*
2185  * Run consistency checks on an image
2186  *
2187  * Returns 0 if the check could be completed (it doesn't mean that the image is
2188  * free of errors) or -errno when an internal error occurred. The results of the
2189  * check are stored in res.
2190  */
2191 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2192 {
2193     if (bs->drv->bdrv_check == NULL) {
2194         return -ENOTSUP;
2195     }
2196 
2197     memset(res, 0, sizeof(*res));
2198     return bs->drv->bdrv_check(bs, res, fix);
2199 }
2200 
2201 #define COMMIT_BUF_SECTORS 2048
2202 
2203 /* commit COW file into the raw image */
2204 int bdrv_commit(BlockDriverState *bs)
2205 {
2206     BlockDriver *drv = bs->drv;
2207     int64_t sector, total_sectors, length, backing_length;
2208     int n, ro, open_flags;
2209     int ret = 0;
2210     uint8_t *buf = NULL;
2211     char filename[PATH_MAX];
2212 
2213     if (!drv)
2214         return -ENOMEDIUM;
2215 
2216     if (!bs->backing_hd) {
2217         return -ENOTSUP;
2218     }
2219 
2220     if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2221         bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2222         return -EBUSY;
2223     }
2224 
2225     ro = bs->backing_hd->read_only;
2226     /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2227     pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2228     open_flags =  bs->backing_hd->open_flags;
2229 
2230     if (ro) {
2231         if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2232             return -EACCES;
2233         }
2234     }
2235 
2236     length = bdrv_getlength(bs);
2237     if (length < 0) {
2238         ret = length;
2239         goto ro_cleanup;
2240     }
2241 
2242     backing_length = bdrv_getlength(bs->backing_hd);
2243     if (backing_length < 0) {
2244         ret = backing_length;
2245         goto ro_cleanup;
2246     }
2247 
2248     /* If our top snapshot is larger than the backing file image,
2249      * grow the backing file image if possible.  If not possible,
2250      * we must return an error */
2251     if (length > backing_length) {
2252         ret = bdrv_truncate(bs->backing_hd, length);
2253         if (ret < 0) {
2254             goto ro_cleanup;
2255         }
2256     }
2257 
2258     total_sectors = length >> BDRV_SECTOR_BITS;
2259     buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2260 
2261     for (sector = 0; sector < total_sectors; sector += n) {
2262         ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2263         if (ret < 0) {
2264             goto ro_cleanup;
2265         }
2266         if (ret) {
2267             ret = bdrv_read(bs, sector, buf, n);
2268             if (ret < 0) {
2269                 goto ro_cleanup;
2270             }
2271 
2272             ret = bdrv_write(bs->backing_hd, sector, buf, n);
2273             if (ret < 0) {
2274                 goto ro_cleanup;
2275             }
2276         }
2277     }
2278 
2279     if (drv->bdrv_make_empty) {
2280         ret = drv->bdrv_make_empty(bs);
2281         if (ret < 0) {
2282             goto ro_cleanup;
2283         }
2284         bdrv_flush(bs);
2285     }
2286 
2287     /*
2288      * Make sure all data we wrote to the backing device is actually
2289      * stable on disk.
2290      */
2291     if (bs->backing_hd) {
2292         bdrv_flush(bs->backing_hd);
2293     }
2294 
2295     ret = 0;
2296 ro_cleanup:
2297     g_free(buf);
2298 
2299     if (ro) {
2300         /* ignoring error return here */
2301         bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2302     }
2303 
2304     return ret;
2305 }
2306 
2307 int bdrv_commit_all(void)
2308 {
2309     BlockDriverState *bs;
2310 
2311     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2312         AioContext *aio_context = bdrv_get_aio_context(bs);
2313 
2314         aio_context_acquire(aio_context);
2315         if (bs->drv && bs->backing_hd) {
2316             int ret = bdrv_commit(bs);
2317             if (ret < 0) {
2318                 aio_context_release(aio_context);
2319                 return ret;
2320             }
2321         }
2322         aio_context_release(aio_context);
2323     }
2324     return 0;
2325 }
2326 
2327 /**
2328  * Remove an active request from the tracked requests list
2329  *
2330  * This function should be called when a tracked request is completing.
2331  */
2332 static void tracked_request_end(BdrvTrackedRequest *req)
2333 {
2334     if (req->serialising) {
2335         req->bs->serialising_in_flight--;
2336     }
2337 
2338     QLIST_REMOVE(req, list);
2339     qemu_co_queue_restart_all(&req->wait_queue);
2340 }
2341 
2342 /**
2343  * Add an active request to the tracked requests list
2344  */
2345 static void tracked_request_begin(BdrvTrackedRequest *req,
2346                                   BlockDriverState *bs,
2347                                   int64_t offset,
2348                                   unsigned int bytes, bool is_write)
2349 {
2350     *req = (BdrvTrackedRequest){
2351         .bs = bs,
2352         .offset         = offset,
2353         .bytes          = bytes,
2354         .is_write       = is_write,
2355         .co             = qemu_coroutine_self(),
2356         .serialising    = false,
2357         .overlap_offset = offset,
2358         .overlap_bytes  = bytes,
2359     };
2360 
2361     qemu_co_queue_init(&req->wait_queue);
2362 
2363     QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2364 }
2365 
2366 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2367 {
2368     int64_t overlap_offset = req->offset & ~(align - 1);
2369     unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2370                                - overlap_offset;
2371 
2372     if (!req->serialising) {
2373         req->bs->serialising_in_flight++;
2374         req->serialising = true;
2375     }
2376 
2377     req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2378     req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2379 }
2380 
2381 /**
2382  * Round a region to cluster boundaries
2383  */
2384 void bdrv_round_to_clusters(BlockDriverState *bs,
2385                             int64_t sector_num, int nb_sectors,
2386                             int64_t *cluster_sector_num,
2387                             int *cluster_nb_sectors)
2388 {
2389     BlockDriverInfo bdi;
2390 
2391     if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2392         *cluster_sector_num = sector_num;
2393         *cluster_nb_sectors = nb_sectors;
2394     } else {
2395         int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2396         *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2397         *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2398                                             nb_sectors, c);
2399     }
2400 }
2401 
2402 static int bdrv_get_cluster_size(BlockDriverState *bs)
2403 {
2404     BlockDriverInfo bdi;
2405     int ret;
2406 
2407     ret = bdrv_get_info(bs, &bdi);
2408     if (ret < 0 || bdi.cluster_size == 0) {
2409         return bs->request_alignment;
2410     } else {
2411         return bdi.cluster_size;
2412     }
2413 }
2414 
2415 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2416                                      int64_t offset, unsigned int bytes)
2417 {
2418     /*        aaaa   bbbb */
2419     if (offset >= req->overlap_offset + req->overlap_bytes) {
2420         return false;
2421     }
2422     /* bbbb   aaaa        */
2423     if (req->overlap_offset >= offset + bytes) {
2424         return false;
2425     }
2426     return true;
2427 }
2428 
2429 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2430 {
2431     BlockDriverState *bs = self->bs;
2432     BdrvTrackedRequest *req;
2433     bool retry;
2434     bool waited = false;
2435 
2436     if (!bs->serialising_in_flight) {
2437         return false;
2438     }
2439 
2440     do {
2441         retry = false;
2442         QLIST_FOREACH(req, &bs->tracked_requests, list) {
2443             if (req == self || (!req->serialising && !self->serialising)) {
2444                 continue;
2445             }
2446             if (tracked_request_overlaps(req, self->overlap_offset,
2447                                          self->overlap_bytes))
2448             {
2449                 /* Hitting this means there was a reentrant request, for
2450                  * example, a block driver issuing nested requests.  This must
2451                  * never happen since it means deadlock.
2452                  */
2453                 assert(qemu_coroutine_self() != req->co);
2454 
2455                 /* If the request is already (indirectly) waiting for us, or
2456                  * will wait for us as soon as it wakes up, then just go on
2457                  * (instead of producing a deadlock in the former case). */
2458                 if (!req->waiting_for) {
2459                     self->waiting_for = req;
2460                     qemu_co_queue_wait(&req->wait_queue);
2461                     self->waiting_for = NULL;
2462                     retry = true;
2463                     waited = true;
2464                     break;
2465                 }
2466             }
2467         }
2468     } while (retry);
2469 
2470     return waited;
2471 }
2472 
2473 /*
2474  * Return values:
2475  * 0        - success
2476  * -EINVAL  - backing format specified, but no file
2477  * -ENOSPC  - can't update the backing file because no space is left in the
2478  *            image file header
2479  * -ENOTSUP - format driver doesn't support changing the backing file
2480  */
2481 int bdrv_change_backing_file(BlockDriverState *bs,
2482     const char *backing_file, const char *backing_fmt)
2483 {
2484     BlockDriver *drv = bs->drv;
2485     int ret;
2486 
2487     /* Backing file format doesn't make sense without a backing file */
2488     if (backing_fmt && !backing_file) {
2489         return -EINVAL;
2490     }
2491 
2492     if (drv->bdrv_change_backing_file != NULL) {
2493         ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2494     } else {
2495         ret = -ENOTSUP;
2496     }
2497 
2498     if (ret == 0) {
2499         pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2500         pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2501     }
2502     return ret;
2503 }
2504 
2505 /*
2506  * Finds the image layer in the chain that has 'bs' as its backing file.
2507  *
2508  * active is the current topmost image.
2509  *
2510  * Returns NULL if bs is not found in active's image chain,
2511  * or if active == bs.
2512  *
2513  * Returns the bottommost base image if bs == NULL.
2514  */
2515 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2516                                     BlockDriverState *bs)
2517 {
2518     while (active && bs != active->backing_hd) {
2519         active = active->backing_hd;
2520     }
2521 
2522     return active;
2523 }
2524 
2525 /* Given a BDS, searches for the base layer. */
2526 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2527 {
2528     return bdrv_find_overlay(bs, NULL);
2529 }
2530 
2531 typedef struct BlkIntermediateStates {
2532     BlockDriverState *bs;
2533     QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2534 } BlkIntermediateStates;
2535 
2536 
2537 /*
2538  * Drops images above 'base' up to and including 'top', and sets the image
2539  * above 'top' to have base as its backing file.
2540  *
2541  * Requires that the overlay to 'top' is opened r/w, so that the backing file
2542  * information in 'bs' can be properly updated.
2543  *
2544  * E.g., this will convert the following chain:
2545  * bottom <- base <- intermediate <- top <- active
2546  *
2547  * to
2548  *
2549  * bottom <- base <- active
2550  *
2551  * It is allowed for bottom==base, in which case it converts:
2552  *
2553  * base <- intermediate <- top <- active
2554  *
2555  * to
2556  *
2557  * base <- active
2558  *
2559  * If backing_file_str is non-NULL, it will be used when modifying top's
2560  * overlay image metadata.
2561  *
2562  * Error conditions:
2563  *  if active == top, that is considered an error
2564  *
2565  */
2566 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2567                            BlockDriverState *base, const char *backing_file_str)
2568 {
2569     BlockDriverState *intermediate;
2570     BlockDriverState *base_bs = NULL;
2571     BlockDriverState *new_top_bs = NULL;
2572     BlkIntermediateStates *intermediate_state, *next;
2573     int ret = -EIO;
2574 
2575     QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2576     QSIMPLEQ_INIT(&states_to_delete);
2577 
2578     if (!top->drv || !base->drv) {
2579         goto exit;
2580     }
2581 
2582     new_top_bs = bdrv_find_overlay(active, top);
2583 
2584     if (new_top_bs == NULL) {
2585         /* we could not find the image above 'top', this is an error */
2586         goto exit;
2587     }
2588 
2589     /* special case of new_top_bs->backing_hd already pointing to base - nothing
2590      * to do, no intermediate images */
2591     if (new_top_bs->backing_hd == base) {
2592         ret = 0;
2593         goto exit;
2594     }
2595 
2596     intermediate = top;
2597 
2598     /* now we will go down through the list, and add each BDS we find
2599      * into our deletion queue, until we hit the 'base'
2600      */
2601     while (intermediate) {
2602         intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2603         intermediate_state->bs = intermediate;
2604         QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2605 
2606         if (intermediate->backing_hd == base) {
2607             base_bs = intermediate->backing_hd;
2608             break;
2609         }
2610         intermediate = intermediate->backing_hd;
2611     }
2612     if (base_bs == NULL) {
2613         /* something went wrong, we did not end at the base. safely
2614          * unravel everything, and exit with error */
2615         goto exit;
2616     }
2617 
2618     /* success - we can delete the intermediate states, and link top->base */
2619     backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2620     ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2621                                    base_bs->drv ? base_bs->drv->format_name : "");
2622     if (ret) {
2623         goto exit;
2624     }
2625     bdrv_set_backing_hd(new_top_bs, base_bs);
2626 
2627     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2628         /* so that bdrv_close() does not recursively close the chain */
2629         bdrv_set_backing_hd(intermediate_state->bs, NULL);
2630         bdrv_unref(intermediate_state->bs);
2631     }
2632     ret = 0;
2633 
2634 exit:
2635     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2636         g_free(intermediate_state);
2637     }
2638     return ret;
2639 }
2640 
2641 
2642 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2643                                    size_t size)
2644 {
2645     int64_t len;
2646 
2647     if (size > INT_MAX) {
2648         return -EIO;
2649     }
2650 
2651     if (!bdrv_is_inserted(bs))
2652         return -ENOMEDIUM;
2653 
2654     if (bs->growable)
2655         return 0;
2656 
2657     len = bdrv_getlength(bs);
2658 
2659     if (offset < 0)
2660         return -EIO;
2661 
2662     if ((offset > len) || (len - offset < size))
2663         return -EIO;
2664 
2665     return 0;
2666 }
2667 
2668 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2669                               int nb_sectors)
2670 {
2671     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2672         return -EIO;
2673     }
2674 
2675     return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2676                                    nb_sectors * BDRV_SECTOR_SIZE);
2677 }
2678 
2679 typedef struct RwCo {
2680     BlockDriverState *bs;
2681     int64_t offset;
2682     QEMUIOVector *qiov;
2683     bool is_write;
2684     int ret;
2685     BdrvRequestFlags flags;
2686 } RwCo;
2687 
2688 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2689 {
2690     RwCo *rwco = opaque;
2691 
2692     if (!rwco->is_write) {
2693         rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2694                                       rwco->qiov->size, rwco->qiov,
2695                                       rwco->flags);
2696     } else {
2697         rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2698                                        rwco->qiov->size, rwco->qiov,
2699                                        rwco->flags);
2700     }
2701 }
2702 
2703 /*
2704  * Process a vectored synchronous request using coroutines
2705  */
2706 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2707                         QEMUIOVector *qiov, bool is_write,
2708                         BdrvRequestFlags flags)
2709 {
2710     Coroutine *co;
2711     RwCo rwco = {
2712         .bs = bs,
2713         .offset = offset,
2714         .qiov = qiov,
2715         .is_write = is_write,
2716         .ret = NOT_DONE,
2717         .flags = flags,
2718     };
2719 
2720     /**
2721      * In sync call context, when the vcpu is blocked, this throttling timer
2722      * will not fire; so the I/O throttling function has to be disabled here
2723      * if it has been enabled.
2724      */
2725     if (bs->io_limits_enabled) {
2726         fprintf(stderr, "Disabling I/O throttling on '%s' due "
2727                         "to synchronous I/O.\n", bdrv_get_device_name(bs));
2728         bdrv_io_limits_disable(bs);
2729     }
2730 
2731     if (qemu_in_coroutine()) {
2732         /* Fast-path if already in coroutine context */
2733         bdrv_rw_co_entry(&rwco);
2734     } else {
2735         AioContext *aio_context = bdrv_get_aio_context(bs);
2736 
2737         co = qemu_coroutine_create(bdrv_rw_co_entry);
2738         qemu_coroutine_enter(co, &rwco);
2739         while (rwco.ret == NOT_DONE) {
2740             aio_poll(aio_context, true);
2741         }
2742     }
2743     return rwco.ret;
2744 }
2745 
2746 /*
2747  * Process a synchronous request using coroutines
2748  */
2749 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2750                       int nb_sectors, bool is_write, BdrvRequestFlags flags)
2751 {
2752     QEMUIOVector qiov;
2753     struct iovec iov = {
2754         .iov_base = (void *)buf,
2755         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2756     };
2757 
2758     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2759         return -EINVAL;
2760     }
2761 
2762     qemu_iovec_init_external(&qiov, &iov, 1);
2763     return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2764                         &qiov, is_write, flags);
2765 }
2766 
2767 /* return < 0 if error. See bdrv_write() for the return codes */
2768 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2769               uint8_t *buf, int nb_sectors)
2770 {
2771     return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2772 }
2773 
2774 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2775 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2776                           uint8_t *buf, int nb_sectors)
2777 {
2778     bool enabled;
2779     int ret;
2780 
2781     enabled = bs->io_limits_enabled;
2782     bs->io_limits_enabled = false;
2783     ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2784     bs->io_limits_enabled = enabled;
2785     return ret;
2786 }
2787 
2788 /* Return < 0 if error. Important errors are:
2789   -EIO         generic I/O error (may happen for all errors)
2790   -ENOMEDIUM   No media inserted.
2791   -EINVAL      Invalid sector number or nb_sectors
2792   -EACCES      Trying to write a read-only device
2793 */
2794 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2795                const uint8_t *buf, int nb_sectors)
2796 {
2797     return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2798 }
2799 
2800 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2801                       int nb_sectors, BdrvRequestFlags flags)
2802 {
2803     return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2804                       BDRV_REQ_ZERO_WRITE | flags);
2805 }
2806 
2807 /*
2808  * Completely zero out a block device with the help of bdrv_write_zeroes.
2809  * The operation is sped up by checking the block status and only writing
2810  * zeroes to the device if they currently do not return zeroes. Optional
2811  * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2812  *
2813  * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2814  */
2815 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2816 {
2817     int64_t target_size;
2818     int64_t ret, nb_sectors, sector_num = 0;
2819     int n;
2820 
2821     target_size = bdrv_getlength(bs);
2822     if (target_size < 0) {
2823         return target_size;
2824     }
2825     target_size /= BDRV_SECTOR_SIZE;
2826 
2827     for (;;) {
2828         nb_sectors = target_size - sector_num;
2829         if (nb_sectors <= 0) {
2830             return 0;
2831         }
2832         if (nb_sectors > INT_MAX) {
2833             nb_sectors = INT_MAX;
2834         }
2835         ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2836         if (ret < 0) {
2837             error_report("error getting block status at sector %" PRId64 ": %s",
2838                          sector_num, strerror(-ret));
2839             return ret;
2840         }
2841         if (ret & BDRV_BLOCK_ZERO) {
2842             sector_num += n;
2843             continue;
2844         }
2845         ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2846         if (ret < 0) {
2847             error_report("error writing zeroes at sector %" PRId64 ": %s",
2848                          sector_num, strerror(-ret));
2849             return ret;
2850         }
2851         sector_num += n;
2852     }
2853 }
2854 
2855 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2856 {
2857     QEMUIOVector qiov;
2858     struct iovec iov = {
2859         .iov_base = (void *)buf,
2860         .iov_len = bytes,
2861     };
2862     int ret;
2863 
2864     if (bytes < 0) {
2865         return -EINVAL;
2866     }
2867 
2868     qemu_iovec_init_external(&qiov, &iov, 1);
2869     ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2870     if (ret < 0) {
2871         return ret;
2872     }
2873 
2874     return bytes;
2875 }
2876 
2877 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2878 {
2879     int ret;
2880 
2881     ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2882     if (ret < 0) {
2883         return ret;
2884     }
2885 
2886     return qiov->size;
2887 }
2888 
2889 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2890                 const void *buf, int bytes)
2891 {
2892     QEMUIOVector qiov;
2893     struct iovec iov = {
2894         .iov_base   = (void *) buf,
2895         .iov_len    = bytes,
2896     };
2897 
2898     if (bytes < 0) {
2899         return -EINVAL;
2900     }
2901 
2902     qemu_iovec_init_external(&qiov, &iov, 1);
2903     return bdrv_pwritev(bs, offset, &qiov);
2904 }
2905 
2906 /*
2907  * Writes to the file and ensures that no writes are reordered across this
2908  * request (acts as a barrier)
2909  *
2910  * Returns 0 on success, -errno in error cases.
2911  */
2912 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2913     const void *buf, int count)
2914 {
2915     int ret;
2916 
2917     ret = bdrv_pwrite(bs, offset, buf, count);
2918     if (ret < 0) {
2919         return ret;
2920     }
2921 
2922     /* No flush needed for cache modes that already do it */
2923     if (bs->enable_write_cache) {
2924         bdrv_flush(bs);
2925     }
2926 
2927     return 0;
2928 }
2929 
2930 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2931         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2932 {
2933     /* Perform I/O through a temporary buffer so that users who scribble over
2934      * their read buffer while the operation is in progress do not end up
2935      * modifying the image file.  This is critical for zero-copy guest I/O
2936      * where anything might happen inside guest memory.
2937      */
2938     void *bounce_buffer;
2939 
2940     BlockDriver *drv = bs->drv;
2941     struct iovec iov;
2942     QEMUIOVector bounce_qiov;
2943     int64_t cluster_sector_num;
2944     int cluster_nb_sectors;
2945     size_t skip_bytes;
2946     int ret;
2947 
2948     /* Cover entire cluster so no additional backing file I/O is required when
2949      * allocating cluster in the image file.
2950      */
2951     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2952                            &cluster_sector_num, &cluster_nb_sectors);
2953 
2954     trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2955                                    cluster_sector_num, cluster_nb_sectors);
2956 
2957     iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2958     iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2959     qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2960 
2961     ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2962                              &bounce_qiov);
2963     if (ret < 0) {
2964         goto err;
2965     }
2966 
2967     if (drv->bdrv_co_write_zeroes &&
2968         buffer_is_zero(bounce_buffer, iov.iov_len)) {
2969         ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2970                                       cluster_nb_sectors, 0);
2971     } else {
2972         /* This does not change the data on the disk, it is not necessary
2973          * to flush even in cache=writethrough mode.
2974          */
2975         ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2976                                   &bounce_qiov);
2977     }
2978 
2979     if (ret < 0) {
2980         /* It might be okay to ignore write errors for guest requests.  If this
2981          * is a deliberate copy-on-read then we don't want to ignore the error.
2982          * Simply report it in all cases.
2983          */
2984         goto err;
2985     }
2986 
2987     skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2988     qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2989                         nb_sectors * BDRV_SECTOR_SIZE);
2990 
2991 err:
2992     qemu_vfree(bounce_buffer);
2993     return ret;
2994 }
2995 
2996 /*
2997  * Forwards an already correctly aligned request to the BlockDriver. This
2998  * handles copy on read and zeroing after EOF; any other features must be
2999  * implemented by the caller.
3000  */
3001 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3002     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3003     int64_t align, QEMUIOVector *qiov, int flags)
3004 {
3005     BlockDriver *drv = bs->drv;
3006     int ret;
3007 
3008     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3009     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3010 
3011     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3012     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3013 
3014     /* Handle Copy on Read and associated serialisation */
3015     if (flags & BDRV_REQ_COPY_ON_READ) {
3016         /* If we touch the same cluster it counts as an overlap.  This
3017          * guarantees that allocating writes will be serialized and not race
3018          * with each other for the same cluster.  For example, in copy-on-read
3019          * it ensures that the CoR read and write operations are atomic and
3020          * guest writes cannot interleave between them. */
3021         mark_request_serialising(req, bdrv_get_cluster_size(bs));
3022     }
3023 
3024     wait_serialising_requests(req);
3025 
3026     if (flags & BDRV_REQ_COPY_ON_READ) {
3027         int pnum;
3028 
3029         ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3030         if (ret < 0) {
3031             goto out;
3032         }
3033 
3034         if (!ret || pnum != nb_sectors) {
3035             ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3036             goto out;
3037         }
3038     }
3039 
3040     /* Forward the request to the BlockDriver */
3041     if (!(bs->zero_beyond_eof && bs->growable)) {
3042         ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3043     } else {
3044         /* Read zeros after EOF of growable BDSes */
3045         int64_t len, total_sectors, max_nb_sectors;
3046 
3047         len = bdrv_getlength(bs);
3048         if (len < 0) {
3049             ret = len;
3050             goto out;
3051         }
3052 
3053         total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3054         max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3055                                   align >> BDRV_SECTOR_BITS);
3056         if (max_nb_sectors > 0) {
3057             ret = drv->bdrv_co_readv(bs, sector_num,
3058                                      MIN(nb_sectors, max_nb_sectors), qiov);
3059         } else {
3060             ret = 0;
3061         }
3062 
3063         /* Reading beyond end of file is supposed to produce zeroes */
3064         if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3065             uint64_t offset = MAX(0, total_sectors - sector_num);
3066             uint64_t bytes = (sector_num + nb_sectors - offset) *
3067                               BDRV_SECTOR_SIZE;
3068             qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3069         }
3070     }
3071 
3072 out:
3073     return ret;
3074 }
3075 
3076 /*
3077  * Handle a read request in coroutine context
3078  */
3079 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3080     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3081     BdrvRequestFlags flags)
3082 {
3083     BlockDriver *drv = bs->drv;
3084     BdrvTrackedRequest req;
3085 
3086     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3087     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3088     uint8_t *head_buf = NULL;
3089     uint8_t *tail_buf = NULL;
3090     QEMUIOVector local_qiov;
3091     bool use_local_qiov = false;
3092     int ret;
3093 
3094     if (!drv) {
3095         return -ENOMEDIUM;
3096     }
3097     if (bdrv_check_byte_request(bs, offset, bytes)) {
3098         return -EIO;
3099     }
3100 
3101     if (bs->copy_on_read) {
3102         flags |= BDRV_REQ_COPY_ON_READ;
3103     }
3104 
3105     /* throttling disk I/O */
3106     if (bs->io_limits_enabled) {
3107         bdrv_io_limits_intercept(bs, bytes, false);
3108     }
3109 
3110     /* Align read if necessary by padding qiov */
3111     if (offset & (align - 1)) {
3112         head_buf = qemu_blockalign(bs, align);
3113         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3114         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3115         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3116         use_local_qiov = true;
3117 
3118         bytes += offset & (align - 1);
3119         offset = offset & ~(align - 1);
3120     }
3121 
3122     if ((offset + bytes) & (align - 1)) {
3123         if (!use_local_qiov) {
3124             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3125             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3126             use_local_qiov = true;
3127         }
3128         tail_buf = qemu_blockalign(bs, align);
3129         qemu_iovec_add(&local_qiov, tail_buf,
3130                        align - ((offset + bytes) & (align - 1)));
3131 
3132         bytes = ROUND_UP(bytes, align);
3133     }
3134 
3135     tracked_request_begin(&req, bs, offset, bytes, false);
3136     ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3137                               use_local_qiov ? &local_qiov : qiov,
3138                               flags);
3139     tracked_request_end(&req);
3140 
3141     if (use_local_qiov) {
3142         qemu_iovec_destroy(&local_qiov);
3143         qemu_vfree(head_buf);
3144         qemu_vfree(tail_buf);
3145     }
3146 
3147     return ret;
3148 }
3149 
3150 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3151     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3152     BdrvRequestFlags flags)
3153 {
3154     if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3155         return -EINVAL;
3156     }
3157 
3158     return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3159                              nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3160 }
3161 
3162 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3163     int nb_sectors, QEMUIOVector *qiov)
3164 {
3165     trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3166 
3167     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3168 }
3169 
3170 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3171     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3172 {
3173     trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3174 
3175     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3176                             BDRV_REQ_COPY_ON_READ);
3177 }
3178 
3179 /* if no limit is specified in the BlockLimits use a default
3180  * of 32768 512-byte sectors (16 MiB) per request.
3181  */
3182 #define MAX_WRITE_ZEROES_DEFAULT 32768
3183 
3184 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3185     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3186 {
3187     BlockDriver *drv = bs->drv;
3188     QEMUIOVector qiov;
3189     struct iovec iov = {0};
3190     int ret = 0;
3191 
3192     int max_write_zeroes = bs->bl.max_write_zeroes ?
3193                            bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3194 
3195     while (nb_sectors > 0 && !ret) {
3196         int num = nb_sectors;
3197 
3198         /* Align request.  Block drivers can expect the "bulk" of the request
3199          * to be aligned.
3200          */
3201         if (bs->bl.write_zeroes_alignment
3202             && num > bs->bl.write_zeroes_alignment) {
3203             if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3204                 /* Make a small request up to the first aligned sector.  */
3205                 num = bs->bl.write_zeroes_alignment;
3206                 num -= sector_num % bs->bl.write_zeroes_alignment;
3207             } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3208                 /* Shorten the request to the last aligned sector.  num cannot
3209                  * underflow because num > bs->bl.write_zeroes_alignment.
3210                  */
3211                 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3212             }
3213         }
3214 
3215         /* limit request size */
3216         if (num > max_write_zeroes) {
3217             num = max_write_zeroes;
3218         }
3219 
3220         ret = -ENOTSUP;
3221         /* First try the efficient write zeroes operation */
3222         if (drv->bdrv_co_write_zeroes) {
3223             ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3224         }
3225 
3226         if (ret == -ENOTSUP) {
3227             /* Fall back to bounce buffer if write zeroes is unsupported */
3228             iov.iov_len = num * BDRV_SECTOR_SIZE;
3229             if (iov.iov_base == NULL) {
3230                 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3231                 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3232             }
3233             qemu_iovec_init_external(&qiov, &iov, 1);
3234 
3235             ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3236 
3237             /* Keep bounce buffer around if it is big enough for all
3238              * all future requests.
3239              */
3240             if (num < max_write_zeroes) {
3241                 qemu_vfree(iov.iov_base);
3242                 iov.iov_base = NULL;
3243             }
3244         }
3245 
3246         sector_num += num;
3247         nb_sectors -= num;
3248     }
3249 
3250     qemu_vfree(iov.iov_base);
3251     return ret;
3252 }
3253 
3254 /*
3255  * Forwards an already correctly aligned write request to the BlockDriver.
3256  */
3257 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3258     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3259     QEMUIOVector *qiov, int flags)
3260 {
3261     BlockDriver *drv = bs->drv;
3262     bool waited;
3263     int ret;
3264 
3265     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3266     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3267 
3268     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3269     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3270 
3271     waited = wait_serialising_requests(req);
3272     assert(!waited || !req->serialising);
3273     assert(req->overlap_offset <= offset);
3274     assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3275 
3276     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3277 
3278     if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3279         !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3280         qemu_iovec_is_zero(qiov)) {
3281         flags |= BDRV_REQ_ZERO_WRITE;
3282         if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3283             flags |= BDRV_REQ_MAY_UNMAP;
3284         }
3285     }
3286 
3287     if (ret < 0) {
3288         /* Do nothing, write notifier decided to fail this request */
3289     } else if (flags & BDRV_REQ_ZERO_WRITE) {
3290         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3291         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3292     } else {
3293         BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3294         ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3295     }
3296     BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3297 
3298     if (ret == 0 && !bs->enable_write_cache) {
3299         ret = bdrv_co_flush(bs);
3300     }
3301 
3302     bdrv_set_dirty(bs, sector_num, nb_sectors);
3303 
3304     if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3305         bs->wr_highest_sector = sector_num + nb_sectors - 1;
3306     }
3307     if (bs->growable && ret >= 0) {
3308         bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3309     }
3310 
3311     return ret;
3312 }
3313 
3314 /*
3315  * Handle a write request in coroutine context
3316  */
3317 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3318     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3319     BdrvRequestFlags flags)
3320 {
3321     BdrvTrackedRequest req;
3322     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3323     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3324     uint8_t *head_buf = NULL;
3325     uint8_t *tail_buf = NULL;
3326     QEMUIOVector local_qiov;
3327     bool use_local_qiov = false;
3328     int ret;
3329 
3330     if (!bs->drv) {
3331         return -ENOMEDIUM;
3332     }
3333     if (bs->read_only) {
3334         return -EACCES;
3335     }
3336     if (bdrv_check_byte_request(bs, offset, bytes)) {
3337         return -EIO;
3338     }
3339 
3340     /* throttling disk I/O */
3341     if (bs->io_limits_enabled) {
3342         bdrv_io_limits_intercept(bs, bytes, true);
3343     }
3344 
3345     /*
3346      * Align write if necessary by performing a read-modify-write cycle.
3347      * Pad qiov with the read parts and be sure to have a tracked request not
3348      * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3349      */
3350     tracked_request_begin(&req, bs, offset, bytes, true);
3351 
3352     if (offset & (align - 1)) {
3353         QEMUIOVector head_qiov;
3354         struct iovec head_iov;
3355 
3356         mark_request_serialising(&req, align);
3357         wait_serialising_requests(&req);
3358 
3359         head_buf = qemu_blockalign(bs, align);
3360         head_iov = (struct iovec) {
3361             .iov_base   = head_buf,
3362             .iov_len    = align,
3363         };
3364         qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3365 
3366         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3367         ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3368                                   align, &head_qiov, 0);
3369         if (ret < 0) {
3370             goto fail;
3371         }
3372         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3373 
3374         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3375         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3376         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3377         use_local_qiov = true;
3378 
3379         bytes += offset & (align - 1);
3380         offset = offset & ~(align - 1);
3381     }
3382 
3383     if ((offset + bytes) & (align - 1)) {
3384         QEMUIOVector tail_qiov;
3385         struct iovec tail_iov;
3386         size_t tail_bytes;
3387         bool waited;
3388 
3389         mark_request_serialising(&req, align);
3390         waited = wait_serialising_requests(&req);
3391         assert(!waited || !use_local_qiov);
3392 
3393         tail_buf = qemu_blockalign(bs, align);
3394         tail_iov = (struct iovec) {
3395             .iov_base   = tail_buf,
3396             .iov_len    = align,
3397         };
3398         qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3399 
3400         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3401         ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3402                                   align, &tail_qiov, 0);
3403         if (ret < 0) {
3404             goto fail;
3405         }
3406         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3407 
3408         if (!use_local_qiov) {
3409             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3410             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3411             use_local_qiov = true;
3412         }
3413 
3414         tail_bytes = (offset + bytes) & (align - 1);
3415         qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3416 
3417         bytes = ROUND_UP(bytes, align);
3418     }
3419 
3420     ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3421                                use_local_qiov ? &local_qiov : qiov,
3422                                flags);
3423 
3424 fail:
3425     tracked_request_end(&req);
3426 
3427     if (use_local_qiov) {
3428         qemu_iovec_destroy(&local_qiov);
3429     }
3430     qemu_vfree(head_buf);
3431     qemu_vfree(tail_buf);
3432 
3433     return ret;
3434 }
3435 
3436 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3437     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3438     BdrvRequestFlags flags)
3439 {
3440     if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3441         return -EINVAL;
3442     }
3443 
3444     return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3445                               nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3446 }
3447 
3448 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3449     int nb_sectors, QEMUIOVector *qiov)
3450 {
3451     trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3452 
3453     return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3454 }
3455 
3456 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3457                                       int64_t sector_num, int nb_sectors,
3458                                       BdrvRequestFlags flags)
3459 {
3460     trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3461 
3462     if (!(bs->open_flags & BDRV_O_UNMAP)) {
3463         flags &= ~BDRV_REQ_MAY_UNMAP;
3464     }
3465 
3466     return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3467                              BDRV_REQ_ZERO_WRITE | flags);
3468 }
3469 
3470 /**
3471  * Truncate file to 'offset' bytes (needed only for file protocols)
3472  */
3473 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3474 {
3475     BlockDriver *drv = bs->drv;
3476     int ret;
3477     if (!drv)
3478         return -ENOMEDIUM;
3479     if (!drv->bdrv_truncate)
3480         return -ENOTSUP;
3481     if (bs->read_only)
3482         return -EACCES;
3483 
3484     ret = drv->bdrv_truncate(bs, offset);
3485     if (ret == 0) {
3486         ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3487         bdrv_dev_resize_cb(bs);
3488     }
3489     return ret;
3490 }
3491 
3492 /**
3493  * Length of a allocated file in bytes. Sparse files are counted by actual
3494  * allocated space. Return < 0 if error or unknown.
3495  */
3496 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3497 {
3498     BlockDriver *drv = bs->drv;
3499     if (!drv) {
3500         return -ENOMEDIUM;
3501     }
3502     if (drv->bdrv_get_allocated_file_size) {
3503         return drv->bdrv_get_allocated_file_size(bs);
3504     }
3505     if (bs->file) {
3506         return bdrv_get_allocated_file_size(bs->file);
3507     }
3508     return -ENOTSUP;
3509 }
3510 
3511 /**
3512  * Length of a file in bytes. Return < 0 if error or unknown.
3513  */
3514 int64_t bdrv_getlength(BlockDriverState *bs)
3515 {
3516     BlockDriver *drv = bs->drv;
3517     if (!drv)
3518         return -ENOMEDIUM;
3519 
3520     if (drv->has_variable_length) {
3521         int ret = refresh_total_sectors(bs, bs->total_sectors);
3522         if (ret < 0) {
3523             return ret;
3524         }
3525     }
3526     return bs->total_sectors * BDRV_SECTOR_SIZE;
3527 }
3528 
3529 /* return 0 as number of sectors if no device present or error */
3530 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3531 {
3532     int64_t length;
3533     length = bdrv_getlength(bs);
3534     if (length < 0)
3535         length = 0;
3536     else
3537         length = length >> BDRV_SECTOR_BITS;
3538     *nb_sectors_ptr = length;
3539 }
3540 
3541 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3542                        BlockdevOnError on_write_error)
3543 {
3544     bs->on_read_error = on_read_error;
3545     bs->on_write_error = on_write_error;
3546 }
3547 
3548 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3549 {
3550     return is_read ? bs->on_read_error : bs->on_write_error;
3551 }
3552 
3553 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3554 {
3555     BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3556 
3557     switch (on_err) {
3558     case BLOCKDEV_ON_ERROR_ENOSPC:
3559         return (error == ENOSPC) ?
3560                BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3561     case BLOCKDEV_ON_ERROR_STOP:
3562         return BLOCK_ERROR_ACTION_STOP;
3563     case BLOCKDEV_ON_ERROR_REPORT:
3564         return BLOCK_ERROR_ACTION_REPORT;
3565     case BLOCKDEV_ON_ERROR_IGNORE:
3566         return BLOCK_ERROR_ACTION_IGNORE;
3567     default:
3568         abort();
3569     }
3570 }
3571 
3572 /* This is done by device models because, while the block layer knows
3573  * about the error, it does not know whether an operation comes from
3574  * the device or the block layer (from a job, for example).
3575  */
3576 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3577                        bool is_read, int error)
3578 {
3579     assert(error >= 0);
3580 
3581     if (action == BLOCK_ERROR_ACTION_STOP) {
3582         /* First set the iostatus, so that "info block" returns an iostatus
3583          * that matches the events raised so far (an additional error iostatus
3584          * is fine, but not a lost one).
3585          */
3586         bdrv_iostatus_set_err(bs, error);
3587 
3588         /* Then raise the request to stop the VM and the event.
3589          * qemu_system_vmstop_request_prepare has two effects.  First,
3590          * it ensures that the STOP event always comes after the
3591          * BLOCK_IO_ERROR event.  Second, it ensures that even if management
3592          * can observe the STOP event and do a "cont" before the STOP
3593          * event is issued, the VM will not stop.  In this case, vm_start()
3594          * also ensures that the STOP/RESUME pair of events is emitted.
3595          */
3596         qemu_system_vmstop_request_prepare();
3597         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3598                                        is_read ? IO_OPERATION_TYPE_READ :
3599                                        IO_OPERATION_TYPE_WRITE,
3600                                        action, &error_abort);
3601         qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3602     } else {
3603         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3604                                        is_read ? IO_OPERATION_TYPE_READ :
3605                                        IO_OPERATION_TYPE_WRITE,
3606                                        action, &error_abort);
3607     }
3608 }
3609 
3610 int bdrv_is_read_only(BlockDriverState *bs)
3611 {
3612     return bs->read_only;
3613 }
3614 
3615 int bdrv_is_sg(BlockDriverState *bs)
3616 {
3617     return bs->sg;
3618 }
3619 
3620 int bdrv_enable_write_cache(BlockDriverState *bs)
3621 {
3622     return bs->enable_write_cache;
3623 }
3624 
3625 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3626 {
3627     bs->enable_write_cache = wce;
3628 
3629     /* so a reopen() will preserve wce */
3630     if (wce) {
3631         bs->open_flags |= BDRV_O_CACHE_WB;
3632     } else {
3633         bs->open_flags &= ~BDRV_O_CACHE_WB;
3634     }
3635 }
3636 
3637 int bdrv_is_encrypted(BlockDriverState *bs)
3638 {
3639     if (bs->backing_hd && bs->backing_hd->encrypted)
3640         return 1;
3641     return bs->encrypted;
3642 }
3643 
3644 int bdrv_key_required(BlockDriverState *bs)
3645 {
3646     BlockDriverState *backing_hd = bs->backing_hd;
3647 
3648     if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3649         return 1;
3650     return (bs->encrypted && !bs->valid_key);
3651 }
3652 
3653 int bdrv_set_key(BlockDriverState *bs, const char *key)
3654 {
3655     int ret;
3656     if (bs->backing_hd && bs->backing_hd->encrypted) {
3657         ret = bdrv_set_key(bs->backing_hd, key);
3658         if (ret < 0)
3659             return ret;
3660         if (!bs->encrypted)
3661             return 0;
3662     }
3663     if (!bs->encrypted) {
3664         return -EINVAL;
3665     } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3666         return -ENOMEDIUM;
3667     }
3668     ret = bs->drv->bdrv_set_key(bs, key);
3669     if (ret < 0) {
3670         bs->valid_key = 0;
3671     } else if (!bs->valid_key) {
3672         bs->valid_key = 1;
3673         /* call the change callback now, we skipped it on open */
3674         bdrv_dev_change_media_cb(bs, true);
3675     }
3676     return ret;
3677 }
3678 
3679 const char *bdrv_get_format_name(BlockDriverState *bs)
3680 {
3681     return bs->drv ? bs->drv->format_name : NULL;
3682 }
3683 
3684 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3685                          void *opaque)
3686 {
3687     BlockDriver *drv;
3688     int count = 0;
3689     const char **formats = NULL;
3690 
3691     QLIST_FOREACH(drv, &bdrv_drivers, list) {
3692         if (drv->format_name) {
3693             bool found = false;
3694             int i = count;
3695             while (formats && i && !found) {
3696                 found = !strcmp(formats[--i], drv->format_name);
3697             }
3698 
3699             if (!found) {
3700                 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3701                 formats[count++] = drv->format_name;
3702                 it(opaque, drv->format_name);
3703             }
3704         }
3705     }
3706     g_free(formats);
3707 }
3708 
3709 /* This function is to find block backend bs */
3710 BlockDriverState *bdrv_find(const char *name)
3711 {
3712     BlockDriverState *bs;
3713 
3714     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3715         if (!strcmp(name, bs->device_name)) {
3716             return bs;
3717         }
3718     }
3719     return NULL;
3720 }
3721 
3722 /* This function is to find a node in the bs graph */
3723 BlockDriverState *bdrv_find_node(const char *node_name)
3724 {
3725     BlockDriverState *bs;
3726 
3727     assert(node_name);
3728 
3729     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3730         if (!strcmp(node_name, bs->node_name)) {
3731             return bs;
3732         }
3733     }
3734     return NULL;
3735 }
3736 
3737 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3738 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3739 {
3740     BlockDeviceInfoList *list, *entry;
3741     BlockDriverState *bs;
3742 
3743     list = NULL;
3744     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3745         entry = g_malloc0(sizeof(*entry));
3746         entry->value = bdrv_block_device_info(bs);
3747         entry->next = list;
3748         list = entry;
3749     }
3750 
3751     return list;
3752 }
3753 
3754 BlockDriverState *bdrv_lookup_bs(const char *device,
3755                                  const char *node_name,
3756                                  Error **errp)
3757 {
3758     BlockDriverState *bs = NULL;
3759 
3760     if (device) {
3761         bs = bdrv_find(device);
3762 
3763         if (bs) {
3764             return bs;
3765         }
3766     }
3767 
3768     if (node_name) {
3769         bs = bdrv_find_node(node_name);
3770 
3771         if (bs) {
3772             return bs;
3773         }
3774     }
3775 
3776     error_setg(errp, "Cannot find device=%s nor node_name=%s",
3777                      device ? device : "",
3778                      node_name ? node_name : "");
3779     return NULL;
3780 }
3781 
3782 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3783  * return false.  If either argument is NULL, return false. */
3784 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3785 {
3786     while (top && top != base) {
3787         top = top->backing_hd;
3788     }
3789 
3790     return top != NULL;
3791 }
3792 
3793 BlockDriverState *bdrv_next(BlockDriverState *bs)
3794 {
3795     if (!bs) {
3796         return QTAILQ_FIRST(&bdrv_states);
3797     }
3798     return QTAILQ_NEXT(bs, device_list);
3799 }
3800 
3801 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3802 {
3803     BlockDriverState *bs;
3804 
3805     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3806         it(opaque, bs);
3807     }
3808 }
3809 
3810 const char *bdrv_get_device_name(BlockDriverState *bs)
3811 {
3812     return bs->device_name;
3813 }
3814 
3815 int bdrv_get_flags(BlockDriverState *bs)
3816 {
3817     return bs->open_flags;
3818 }
3819 
3820 int bdrv_flush_all(void)
3821 {
3822     BlockDriverState *bs;
3823     int result = 0;
3824 
3825     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3826         AioContext *aio_context = bdrv_get_aio_context(bs);
3827         int ret;
3828 
3829         aio_context_acquire(aio_context);
3830         ret = bdrv_flush(bs);
3831         if (ret < 0 && !result) {
3832             result = ret;
3833         }
3834         aio_context_release(aio_context);
3835     }
3836 
3837     return result;
3838 }
3839 
3840 int bdrv_has_zero_init_1(BlockDriverState *bs)
3841 {
3842     return 1;
3843 }
3844 
3845 int bdrv_has_zero_init(BlockDriverState *bs)
3846 {
3847     assert(bs->drv);
3848 
3849     /* If BS is a copy on write image, it is initialized to
3850        the contents of the base image, which may not be zeroes.  */
3851     if (bs->backing_hd) {
3852         return 0;
3853     }
3854     if (bs->drv->bdrv_has_zero_init) {
3855         return bs->drv->bdrv_has_zero_init(bs);
3856     }
3857 
3858     /* safe default */
3859     return 0;
3860 }
3861 
3862 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3863 {
3864     BlockDriverInfo bdi;
3865 
3866     if (bs->backing_hd) {
3867         return false;
3868     }
3869 
3870     if (bdrv_get_info(bs, &bdi) == 0) {
3871         return bdi.unallocated_blocks_are_zero;
3872     }
3873 
3874     return false;
3875 }
3876 
3877 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3878 {
3879     BlockDriverInfo bdi;
3880 
3881     if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3882         return false;
3883     }
3884 
3885     if (bdrv_get_info(bs, &bdi) == 0) {
3886         return bdi.can_write_zeroes_with_unmap;
3887     }
3888 
3889     return false;
3890 }
3891 
3892 typedef struct BdrvCoGetBlockStatusData {
3893     BlockDriverState *bs;
3894     BlockDriverState *base;
3895     int64_t sector_num;
3896     int nb_sectors;
3897     int *pnum;
3898     int64_t ret;
3899     bool done;
3900 } BdrvCoGetBlockStatusData;
3901 
3902 /*
3903  * Returns true iff the specified sector is present in the disk image. Drivers
3904  * not implementing the functionality are assumed to not support backing files,
3905  * hence all their sectors are reported as allocated.
3906  *
3907  * If 'sector_num' is beyond the end of the disk image the return value is 0
3908  * and 'pnum' is set to 0.
3909  *
3910  * 'pnum' is set to the number of sectors (including and immediately following
3911  * the specified sector) that are known to be in the same
3912  * allocated/unallocated state.
3913  *
3914  * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
3915  * beyond the end of the disk image it will be clamped.
3916  */
3917 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3918                                                      int64_t sector_num,
3919                                                      int nb_sectors, int *pnum)
3920 {
3921     int64_t length;
3922     int64_t n;
3923     int64_t ret, ret2;
3924 
3925     length = bdrv_getlength(bs);
3926     if (length < 0) {
3927         return length;
3928     }
3929 
3930     if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3931         *pnum = 0;
3932         return 0;
3933     }
3934 
3935     n = bs->total_sectors - sector_num;
3936     if (n < nb_sectors) {
3937         nb_sectors = n;
3938     }
3939 
3940     if (!bs->drv->bdrv_co_get_block_status) {
3941         *pnum = nb_sectors;
3942         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3943         if (bs->drv->protocol_name) {
3944             ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3945         }
3946         return ret;
3947     }
3948 
3949     ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3950     if (ret < 0) {
3951         *pnum = 0;
3952         return ret;
3953     }
3954 
3955     if (ret & BDRV_BLOCK_RAW) {
3956         assert(ret & BDRV_BLOCK_OFFSET_VALID);
3957         return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3958                                      *pnum, pnum);
3959     }
3960 
3961     if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3962         ret |= BDRV_BLOCK_ALLOCATED;
3963     }
3964 
3965     if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3966         if (bdrv_unallocated_blocks_are_zero(bs)) {
3967             ret |= BDRV_BLOCK_ZERO;
3968         } else if (bs->backing_hd) {
3969             BlockDriverState *bs2 = bs->backing_hd;
3970             int64_t length2 = bdrv_getlength(bs2);
3971             if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3972                 ret |= BDRV_BLOCK_ZERO;
3973             }
3974         }
3975     }
3976 
3977     if (bs->file &&
3978         (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3979         (ret & BDRV_BLOCK_OFFSET_VALID)) {
3980         ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3981                                         *pnum, pnum);
3982         if (ret2 >= 0) {
3983             /* Ignore errors.  This is just providing extra information, it
3984              * is useful but not necessary.
3985              */
3986             ret |= (ret2 & BDRV_BLOCK_ZERO);
3987         }
3988     }
3989 
3990     return ret;
3991 }
3992 
3993 /* Coroutine wrapper for bdrv_get_block_status() */
3994 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3995 {
3996     BdrvCoGetBlockStatusData *data = opaque;
3997     BlockDriverState *bs = data->bs;
3998 
3999     data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4000                                          data->pnum);
4001     data->done = true;
4002 }
4003 
4004 /*
4005  * Synchronous wrapper around bdrv_co_get_block_status().
4006  *
4007  * See bdrv_co_get_block_status() for details.
4008  */
4009 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4010                               int nb_sectors, int *pnum)
4011 {
4012     Coroutine *co;
4013     BdrvCoGetBlockStatusData data = {
4014         .bs = bs,
4015         .sector_num = sector_num,
4016         .nb_sectors = nb_sectors,
4017         .pnum = pnum,
4018         .done = false,
4019     };
4020 
4021     if (qemu_in_coroutine()) {
4022         /* Fast-path if already in coroutine context */
4023         bdrv_get_block_status_co_entry(&data);
4024     } else {
4025         AioContext *aio_context = bdrv_get_aio_context(bs);
4026 
4027         co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4028         qemu_coroutine_enter(co, &data);
4029         while (!data.done) {
4030             aio_poll(aio_context, true);
4031         }
4032     }
4033     return data.ret;
4034 }
4035 
4036 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4037                                    int nb_sectors, int *pnum)
4038 {
4039     int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4040     if (ret < 0) {
4041         return ret;
4042     }
4043     return (ret & BDRV_BLOCK_ALLOCATED);
4044 }
4045 
4046 /*
4047  * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4048  *
4049  * Return true if the given sector is allocated in any image between
4050  * BASE and TOP (inclusive).  BASE can be NULL to check if the given
4051  * sector is allocated in any image of the chain.  Return false otherwise.
4052  *
4053  * 'pnum' is set to the number of sectors (including and immediately following
4054  *  the specified sector) that are known to be in the same
4055  *  allocated/unallocated state.
4056  *
4057  */
4058 int bdrv_is_allocated_above(BlockDriverState *top,
4059                             BlockDriverState *base,
4060                             int64_t sector_num,
4061                             int nb_sectors, int *pnum)
4062 {
4063     BlockDriverState *intermediate;
4064     int ret, n = nb_sectors;
4065 
4066     intermediate = top;
4067     while (intermediate && intermediate != base) {
4068         int pnum_inter;
4069         ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4070                                 &pnum_inter);
4071         if (ret < 0) {
4072             return ret;
4073         } else if (ret) {
4074             *pnum = pnum_inter;
4075             return 1;
4076         }
4077 
4078         /*
4079          * [sector_num, nb_sectors] is unallocated on top but intermediate
4080          * might have
4081          *
4082          * [sector_num+x, nr_sectors] allocated.
4083          */
4084         if (n > pnum_inter &&
4085             (intermediate == top ||
4086              sector_num + pnum_inter < intermediate->total_sectors)) {
4087             n = pnum_inter;
4088         }
4089 
4090         intermediate = intermediate->backing_hd;
4091     }
4092 
4093     *pnum = n;
4094     return 0;
4095 }
4096 
4097 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4098 {
4099     if (bs->backing_hd && bs->backing_hd->encrypted)
4100         return bs->backing_file;
4101     else if (bs->encrypted)
4102         return bs->filename;
4103     else
4104         return NULL;
4105 }
4106 
4107 void bdrv_get_backing_filename(BlockDriverState *bs,
4108                                char *filename, int filename_size)
4109 {
4110     pstrcpy(filename, filename_size, bs->backing_file);
4111 }
4112 
4113 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4114                           const uint8_t *buf, int nb_sectors)
4115 {
4116     BlockDriver *drv = bs->drv;
4117     if (!drv)
4118         return -ENOMEDIUM;
4119     if (!drv->bdrv_write_compressed)
4120         return -ENOTSUP;
4121     if (bdrv_check_request(bs, sector_num, nb_sectors))
4122         return -EIO;
4123 
4124     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4125 
4126     return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4127 }
4128 
4129 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4130 {
4131     BlockDriver *drv = bs->drv;
4132     if (!drv)
4133         return -ENOMEDIUM;
4134     if (!drv->bdrv_get_info)
4135         return -ENOTSUP;
4136     memset(bdi, 0, sizeof(*bdi));
4137     return drv->bdrv_get_info(bs, bdi);
4138 }
4139 
4140 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4141 {
4142     BlockDriver *drv = bs->drv;
4143     if (drv && drv->bdrv_get_specific_info) {
4144         return drv->bdrv_get_specific_info(bs);
4145     }
4146     return NULL;
4147 }
4148 
4149 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4150                       int64_t pos, int size)
4151 {
4152     QEMUIOVector qiov;
4153     struct iovec iov = {
4154         .iov_base   = (void *) buf,
4155         .iov_len    = size,
4156     };
4157 
4158     qemu_iovec_init_external(&qiov, &iov, 1);
4159     return bdrv_writev_vmstate(bs, &qiov, pos);
4160 }
4161 
4162 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4163 {
4164     BlockDriver *drv = bs->drv;
4165 
4166     if (!drv) {
4167         return -ENOMEDIUM;
4168     } else if (drv->bdrv_save_vmstate) {
4169         return drv->bdrv_save_vmstate(bs, qiov, pos);
4170     } else if (bs->file) {
4171         return bdrv_writev_vmstate(bs->file, qiov, pos);
4172     }
4173 
4174     return -ENOTSUP;
4175 }
4176 
4177 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4178                       int64_t pos, int size)
4179 {
4180     BlockDriver *drv = bs->drv;
4181     if (!drv)
4182         return -ENOMEDIUM;
4183     if (drv->bdrv_load_vmstate)
4184         return drv->bdrv_load_vmstate(bs, buf, pos, size);
4185     if (bs->file)
4186         return bdrv_load_vmstate(bs->file, buf, pos, size);
4187     return -ENOTSUP;
4188 }
4189 
4190 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4191 {
4192     if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4193         return;
4194     }
4195 
4196     bs->drv->bdrv_debug_event(bs, event);
4197 }
4198 
4199 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4200                           const char *tag)
4201 {
4202     while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4203         bs = bs->file;
4204     }
4205 
4206     if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4207         return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4208     }
4209 
4210     return -ENOTSUP;
4211 }
4212 
4213 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4214 {
4215     while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4216         bs = bs->file;
4217     }
4218 
4219     if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4220         return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4221     }
4222 
4223     return -ENOTSUP;
4224 }
4225 
4226 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4227 {
4228     while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4229         bs = bs->file;
4230     }
4231 
4232     if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4233         return bs->drv->bdrv_debug_resume(bs, tag);
4234     }
4235 
4236     return -ENOTSUP;
4237 }
4238 
4239 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4240 {
4241     while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4242         bs = bs->file;
4243     }
4244 
4245     if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4246         return bs->drv->bdrv_debug_is_suspended(bs, tag);
4247     }
4248 
4249     return false;
4250 }
4251 
4252 int bdrv_is_snapshot(BlockDriverState *bs)
4253 {
4254     return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4255 }
4256 
4257 /* backing_file can either be relative, or absolute, or a protocol.  If it is
4258  * relative, it must be relative to the chain.  So, passing in bs->filename
4259  * from a BDS as backing_file should not be done, as that may be relative to
4260  * the CWD rather than the chain. */
4261 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4262         const char *backing_file)
4263 {
4264     char *filename_full = NULL;
4265     char *backing_file_full = NULL;
4266     char *filename_tmp = NULL;
4267     int is_protocol = 0;
4268     BlockDriverState *curr_bs = NULL;
4269     BlockDriverState *retval = NULL;
4270 
4271     if (!bs || !bs->drv || !backing_file) {
4272         return NULL;
4273     }
4274 
4275     filename_full     = g_malloc(PATH_MAX);
4276     backing_file_full = g_malloc(PATH_MAX);
4277     filename_tmp      = g_malloc(PATH_MAX);
4278 
4279     is_protocol = path_has_protocol(backing_file);
4280 
4281     for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4282 
4283         /* If either of the filename paths is actually a protocol, then
4284          * compare unmodified paths; otherwise make paths relative */
4285         if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4286             if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4287                 retval = curr_bs->backing_hd;
4288                 break;
4289             }
4290         } else {
4291             /* If not an absolute filename path, make it relative to the current
4292              * image's filename path */
4293             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4294                          backing_file);
4295 
4296             /* We are going to compare absolute pathnames */
4297             if (!realpath(filename_tmp, filename_full)) {
4298                 continue;
4299             }
4300 
4301             /* We need to make sure the backing filename we are comparing against
4302              * is relative to the current image filename (or absolute) */
4303             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4304                          curr_bs->backing_file);
4305 
4306             if (!realpath(filename_tmp, backing_file_full)) {
4307                 continue;
4308             }
4309 
4310             if (strcmp(backing_file_full, filename_full) == 0) {
4311                 retval = curr_bs->backing_hd;
4312                 break;
4313             }
4314         }
4315     }
4316 
4317     g_free(filename_full);
4318     g_free(backing_file_full);
4319     g_free(filename_tmp);
4320     return retval;
4321 }
4322 
4323 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4324 {
4325     if (!bs->drv) {
4326         return 0;
4327     }
4328 
4329     if (!bs->backing_hd) {
4330         return 0;
4331     }
4332 
4333     return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4334 }
4335 
4336 /**************************************************************/
4337 /* async I/Os */
4338 
4339 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4340                                  QEMUIOVector *qiov, int nb_sectors,
4341                                  BlockDriverCompletionFunc *cb, void *opaque)
4342 {
4343     trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4344 
4345     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4346                                  cb, opaque, false);
4347 }
4348 
4349 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4350                                   QEMUIOVector *qiov, int nb_sectors,
4351                                   BlockDriverCompletionFunc *cb, void *opaque)
4352 {
4353     trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4354 
4355     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4356                                  cb, opaque, true);
4357 }
4358 
4359 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4360         int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4361         BlockDriverCompletionFunc *cb, void *opaque)
4362 {
4363     trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4364 
4365     return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4366                                  BDRV_REQ_ZERO_WRITE | flags,
4367                                  cb, opaque, true);
4368 }
4369 
4370 
4371 typedef struct MultiwriteCB {
4372     int error;
4373     int num_requests;
4374     int num_callbacks;
4375     struct {
4376         BlockDriverCompletionFunc *cb;
4377         void *opaque;
4378         QEMUIOVector *free_qiov;
4379     } callbacks[];
4380 } MultiwriteCB;
4381 
4382 static void multiwrite_user_cb(MultiwriteCB *mcb)
4383 {
4384     int i;
4385 
4386     for (i = 0; i < mcb->num_callbacks; i++) {
4387         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4388         if (mcb->callbacks[i].free_qiov) {
4389             qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4390         }
4391         g_free(mcb->callbacks[i].free_qiov);
4392     }
4393 }
4394 
4395 static void multiwrite_cb(void *opaque, int ret)
4396 {
4397     MultiwriteCB *mcb = opaque;
4398 
4399     trace_multiwrite_cb(mcb, ret);
4400 
4401     if (ret < 0 && !mcb->error) {
4402         mcb->error = ret;
4403     }
4404 
4405     mcb->num_requests--;
4406     if (mcb->num_requests == 0) {
4407         multiwrite_user_cb(mcb);
4408         g_free(mcb);
4409     }
4410 }
4411 
4412 static int multiwrite_req_compare(const void *a, const void *b)
4413 {
4414     const BlockRequest *req1 = a, *req2 = b;
4415 
4416     /*
4417      * Note that we can't simply subtract req2->sector from req1->sector
4418      * here as that could overflow the return value.
4419      */
4420     if (req1->sector > req2->sector) {
4421         return 1;
4422     } else if (req1->sector < req2->sector) {
4423         return -1;
4424     } else {
4425         return 0;
4426     }
4427 }
4428 
4429 /*
4430  * Takes a bunch of requests and tries to merge them. Returns the number of
4431  * requests that remain after merging.
4432  */
4433 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4434     int num_reqs, MultiwriteCB *mcb)
4435 {
4436     int i, outidx;
4437 
4438     // Sort requests by start sector
4439     qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4440 
4441     // Check if adjacent requests touch the same clusters. If so, combine them,
4442     // filling up gaps with zero sectors.
4443     outidx = 0;
4444     for (i = 1; i < num_reqs; i++) {
4445         int merge = 0;
4446         int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4447 
4448         // Handle exactly sequential writes and overlapping writes.
4449         if (reqs[i].sector <= oldreq_last) {
4450             merge = 1;
4451         }
4452 
4453         if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4454             merge = 0;
4455         }
4456 
4457         if (merge) {
4458             size_t size;
4459             QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4460             qemu_iovec_init(qiov,
4461                 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4462 
4463             // Add the first request to the merged one. If the requests are
4464             // overlapping, drop the last sectors of the first request.
4465             size = (reqs[i].sector - reqs[outidx].sector) << 9;
4466             qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4467 
4468             // We should need to add any zeros between the two requests
4469             assert (reqs[i].sector <= oldreq_last);
4470 
4471             // Add the second request
4472             qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4473 
4474             reqs[outidx].nb_sectors = qiov->size >> 9;
4475             reqs[outidx].qiov = qiov;
4476 
4477             mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4478         } else {
4479             outidx++;
4480             reqs[outidx].sector     = reqs[i].sector;
4481             reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4482             reqs[outidx].qiov       = reqs[i].qiov;
4483         }
4484     }
4485 
4486     return outidx + 1;
4487 }
4488 
4489 /*
4490  * Submit multiple AIO write requests at once.
4491  *
4492  * On success, the function returns 0 and all requests in the reqs array have
4493  * been submitted. In error case this function returns -1, and any of the
4494  * requests may or may not be submitted yet. In particular, this means that the
4495  * callback will be called for some of the requests, for others it won't. The
4496  * caller must check the error field of the BlockRequest to wait for the right
4497  * callbacks (if error != 0, no callback will be called).
4498  *
4499  * The implementation may modify the contents of the reqs array, e.g. to merge
4500  * requests. However, the fields opaque and error are left unmodified as they
4501  * are used to signal failure for a single request to the caller.
4502  */
4503 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4504 {
4505     MultiwriteCB *mcb;
4506     int i;
4507 
4508     /* don't submit writes if we don't have a medium */
4509     if (bs->drv == NULL) {
4510         for (i = 0; i < num_reqs; i++) {
4511             reqs[i].error = -ENOMEDIUM;
4512         }
4513         return -1;
4514     }
4515 
4516     if (num_reqs == 0) {
4517         return 0;
4518     }
4519 
4520     // Create MultiwriteCB structure
4521     mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4522     mcb->num_requests = 0;
4523     mcb->num_callbacks = num_reqs;
4524 
4525     for (i = 0; i < num_reqs; i++) {
4526         mcb->callbacks[i].cb = reqs[i].cb;
4527         mcb->callbacks[i].opaque = reqs[i].opaque;
4528     }
4529 
4530     // Check for mergable requests
4531     num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4532 
4533     trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4534 
4535     /* Run the aio requests. */
4536     mcb->num_requests = num_reqs;
4537     for (i = 0; i < num_reqs; i++) {
4538         bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4539                               reqs[i].nb_sectors, reqs[i].flags,
4540                               multiwrite_cb, mcb,
4541                               true);
4542     }
4543 
4544     return 0;
4545 }
4546 
4547 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4548 {
4549     acb->aiocb_info->cancel(acb);
4550 }
4551 
4552 /**************************************************************/
4553 /* async block device emulation */
4554 
4555 typedef struct BlockDriverAIOCBSync {
4556     BlockDriverAIOCB common;
4557     QEMUBH *bh;
4558     int ret;
4559     /* vector translation state */
4560     QEMUIOVector *qiov;
4561     uint8_t *bounce;
4562     int is_write;
4563 } BlockDriverAIOCBSync;
4564 
4565 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4566 {
4567     BlockDriverAIOCBSync *acb =
4568         container_of(blockacb, BlockDriverAIOCBSync, common);
4569     qemu_bh_delete(acb->bh);
4570     acb->bh = NULL;
4571     qemu_aio_release(acb);
4572 }
4573 
4574 static const AIOCBInfo bdrv_em_aiocb_info = {
4575     .aiocb_size         = sizeof(BlockDriverAIOCBSync),
4576     .cancel             = bdrv_aio_cancel_em,
4577 };
4578 
4579 static void bdrv_aio_bh_cb(void *opaque)
4580 {
4581     BlockDriverAIOCBSync *acb = opaque;
4582 
4583     if (!acb->is_write)
4584         qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4585     qemu_vfree(acb->bounce);
4586     acb->common.cb(acb->common.opaque, acb->ret);
4587     qemu_bh_delete(acb->bh);
4588     acb->bh = NULL;
4589     qemu_aio_release(acb);
4590 }
4591 
4592 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4593                                             int64_t sector_num,
4594                                             QEMUIOVector *qiov,
4595                                             int nb_sectors,
4596                                             BlockDriverCompletionFunc *cb,
4597                                             void *opaque,
4598                                             int is_write)
4599 
4600 {
4601     BlockDriverAIOCBSync *acb;
4602 
4603     acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4604     acb->is_write = is_write;
4605     acb->qiov = qiov;
4606     acb->bounce = qemu_blockalign(bs, qiov->size);
4607     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4608 
4609     if (is_write) {
4610         qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4611         acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4612     } else {
4613         acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4614     }
4615 
4616     qemu_bh_schedule(acb->bh);
4617 
4618     return &acb->common;
4619 }
4620 
4621 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4622         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4623         BlockDriverCompletionFunc *cb, void *opaque)
4624 {
4625     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4626 }
4627 
4628 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4629         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4630         BlockDriverCompletionFunc *cb, void *opaque)
4631 {
4632     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4633 }
4634 
4635 
4636 typedef struct BlockDriverAIOCBCoroutine {
4637     BlockDriverAIOCB common;
4638     BlockRequest req;
4639     bool is_write;
4640     bool *done;
4641     QEMUBH* bh;
4642 } BlockDriverAIOCBCoroutine;
4643 
4644 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4645 {
4646     AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4647     BlockDriverAIOCBCoroutine *acb =
4648         container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4649     bool done = false;
4650 
4651     acb->done = &done;
4652     while (!done) {
4653         aio_poll(aio_context, true);
4654     }
4655 }
4656 
4657 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4658     .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
4659     .cancel             = bdrv_aio_co_cancel_em,
4660 };
4661 
4662 static void bdrv_co_em_bh(void *opaque)
4663 {
4664     BlockDriverAIOCBCoroutine *acb = opaque;
4665 
4666     acb->common.cb(acb->common.opaque, acb->req.error);
4667 
4668     if (acb->done) {
4669         *acb->done = true;
4670     }
4671 
4672     qemu_bh_delete(acb->bh);
4673     qemu_aio_release(acb);
4674 }
4675 
4676 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4677 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4678 {
4679     BlockDriverAIOCBCoroutine *acb = opaque;
4680     BlockDriverState *bs = acb->common.bs;
4681 
4682     if (!acb->is_write) {
4683         acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4684             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4685     } else {
4686         acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4687             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4688     }
4689 
4690     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4691     qemu_bh_schedule(acb->bh);
4692 }
4693 
4694 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4695                                                int64_t sector_num,
4696                                                QEMUIOVector *qiov,
4697                                                int nb_sectors,
4698                                                BdrvRequestFlags flags,
4699                                                BlockDriverCompletionFunc *cb,
4700                                                void *opaque,
4701                                                bool is_write)
4702 {
4703     Coroutine *co;
4704     BlockDriverAIOCBCoroutine *acb;
4705 
4706     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4707     acb->req.sector = sector_num;
4708     acb->req.nb_sectors = nb_sectors;
4709     acb->req.qiov = qiov;
4710     acb->req.flags = flags;
4711     acb->is_write = is_write;
4712     acb->done = NULL;
4713 
4714     co = qemu_coroutine_create(bdrv_co_do_rw);
4715     qemu_coroutine_enter(co, acb);
4716 
4717     return &acb->common;
4718 }
4719 
4720 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4721 {
4722     BlockDriverAIOCBCoroutine *acb = opaque;
4723     BlockDriverState *bs = acb->common.bs;
4724 
4725     acb->req.error = bdrv_co_flush(bs);
4726     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4727     qemu_bh_schedule(acb->bh);
4728 }
4729 
4730 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4731         BlockDriverCompletionFunc *cb, void *opaque)
4732 {
4733     trace_bdrv_aio_flush(bs, opaque);
4734 
4735     Coroutine *co;
4736     BlockDriverAIOCBCoroutine *acb;
4737 
4738     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4739     acb->done = NULL;
4740 
4741     co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4742     qemu_coroutine_enter(co, acb);
4743 
4744     return &acb->common;
4745 }
4746 
4747 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4748 {
4749     BlockDriverAIOCBCoroutine *acb = opaque;
4750     BlockDriverState *bs = acb->common.bs;
4751 
4752     acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4753     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4754     qemu_bh_schedule(acb->bh);
4755 }
4756 
4757 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4758         int64_t sector_num, int nb_sectors,
4759         BlockDriverCompletionFunc *cb, void *opaque)
4760 {
4761     Coroutine *co;
4762     BlockDriverAIOCBCoroutine *acb;
4763 
4764     trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4765 
4766     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4767     acb->req.sector = sector_num;
4768     acb->req.nb_sectors = nb_sectors;
4769     acb->done = NULL;
4770     co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4771     qemu_coroutine_enter(co, acb);
4772 
4773     return &acb->common;
4774 }
4775 
4776 void bdrv_init(void)
4777 {
4778     module_call_init(MODULE_INIT_BLOCK);
4779 }
4780 
4781 void bdrv_init_with_whitelist(void)
4782 {
4783     use_bdrv_whitelist = 1;
4784     bdrv_init();
4785 }
4786 
4787 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4788                    BlockDriverCompletionFunc *cb, void *opaque)
4789 {
4790     BlockDriverAIOCB *acb;
4791 
4792     acb = g_slice_alloc(aiocb_info->aiocb_size);
4793     acb->aiocb_info = aiocb_info;
4794     acb->bs = bs;
4795     acb->cb = cb;
4796     acb->opaque = opaque;
4797     return acb;
4798 }
4799 
4800 void qemu_aio_release(void *p)
4801 {
4802     BlockDriverAIOCB *acb = p;
4803     g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4804 }
4805 
4806 /**************************************************************/
4807 /* Coroutine block device emulation */
4808 
4809 typedef struct CoroutineIOCompletion {
4810     Coroutine *coroutine;
4811     int ret;
4812 } CoroutineIOCompletion;
4813 
4814 static void bdrv_co_io_em_complete(void *opaque, int ret)
4815 {
4816     CoroutineIOCompletion *co = opaque;
4817 
4818     co->ret = ret;
4819     qemu_coroutine_enter(co->coroutine, NULL);
4820 }
4821 
4822 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4823                                       int nb_sectors, QEMUIOVector *iov,
4824                                       bool is_write)
4825 {
4826     CoroutineIOCompletion co = {
4827         .coroutine = qemu_coroutine_self(),
4828     };
4829     BlockDriverAIOCB *acb;
4830 
4831     if (is_write) {
4832         acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4833                                        bdrv_co_io_em_complete, &co);
4834     } else {
4835         acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4836                                       bdrv_co_io_em_complete, &co);
4837     }
4838 
4839     trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4840     if (!acb) {
4841         return -EIO;
4842     }
4843     qemu_coroutine_yield();
4844 
4845     return co.ret;
4846 }
4847 
4848 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4849                                          int64_t sector_num, int nb_sectors,
4850                                          QEMUIOVector *iov)
4851 {
4852     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4853 }
4854 
4855 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4856                                          int64_t sector_num, int nb_sectors,
4857                                          QEMUIOVector *iov)
4858 {
4859     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4860 }
4861 
4862 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4863 {
4864     RwCo *rwco = opaque;
4865 
4866     rwco->ret = bdrv_co_flush(rwco->bs);
4867 }
4868 
4869 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4870 {
4871     int ret;
4872 
4873     if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4874         return 0;
4875     }
4876 
4877     /* Write back cached data to the OS even with cache=unsafe */
4878     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4879     if (bs->drv->bdrv_co_flush_to_os) {
4880         ret = bs->drv->bdrv_co_flush_to_os(bs);
4881         if (ret < 0) {
4882             return ret;
4883         }
4884     }
4885 
4886     /* But don't actually force it to the disk with cache=unsafe */
4887     if (bs->open_flags & BDRV_O_NO_FLUSH) {
4888         goto flush_parent;
4889     }
4890 
4891     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4892     if (bs->drv->bdrv_co_flush_to_disk) {
4893         ret = bs->drv->bdrv_co_flush_to_disk(bs);
4894     } else if (bs->drv->bdrv_aio_flush) {
4895         BlockDriverAIOCB *acb;
4896         CoroutineIOCompletion co = {
4897             .coroutine = qemu_coroutine_self(),
4898         };
4899 
4900         acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4901         if (acb == NULL) {
4902             ret = -EIO;
4903         } else {
4904             qemu_coroutine_yield();
4905             ret = co.ret;
4906         }
4907     } else {
4908         /*
4909          * Some block drivers always operate in either writethrough or unsafe
4910          * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4911          * know how the server works (because the behaviour is hardcoded or
4912          * depends on server-side configuration), so we can't ensure that
4913          * everything is safe on disk. Returning an error doesn't work because
4914          * that would break guests even if the server operates in writethrough
4915          * mode.
4916          *
4917          * Let's hope the user knows what he's doing.
4918          */
4919         ret = 0;
4920     }
4921     if (ret < 0) {
4922         return ret;
4923     }
4924 
4925     /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
4926      * in the case of cache=unsafe, so there are no useless flushes.
4927      */
4928 flush_parent:
4929     return bdrv_co_flush(bs->file);
4930 }
4931 
4932 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4933 {
4934     Error *local_err = NULL;
4935     int ret;
4936 
4937     if (!bs->drv)  {
4938         return;
4939     }
4940 
4941     if (bs->drv->bdrv_invalidate_cache) {
4942         bs->drv->bdrv_invalidate_cache(bs, &local_err);
4943     } else if (bs->file) {
4944         bdrv_invalidate_cache(bs->file, &local_err);
4945     }
4946     if (local_err) {
4947         error_propagate(errp, local_err);
4948         return;
4949     }
4950 
4951     ret = refresh_total_sectors(bs, bs->total_sectors);
4952     if (ret < 0) {
4953         error_setg_errno(errp, -ret, "Could not refresh total sector count");
4954         return;
4955     }
4956 }
4957 
4958 void bdrv_invalidate_cache_all(Error **errp)
4959 {
4960     BlockDriverState *bs;
4961     Error *local_err = NULL;
4962 
4963     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4964         AioContext *aio_context = bdrv_get_aio_context(bs);
4965 
4966         aio_context_acquire(aio_context);
4967         bdrv_invalidate_cache(bs, &local_err);
4968         aio_context_release(aio_context);
4969         if (local_err) {
4970             error_propagate(errp, local_err);
4971             return;
4972         }
4973     }
4974 }
4975 
4976 void bdrv_clear_incoming_migration_all(void)
4977 {
4978     BlockDriverState *bs;
4979 
4980     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4981         AioContext *aio_context = bdrv_get_aio_context(bs);
4982 
4983         aio_context_acquire(aio_context);
4984         bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4985         aio_context_release(aio_context);
4986     }
4987 }
4988 
4989 int bdrv_flush(BlockDriverState *bs)
4990 {
4991     Coroutine *co;
4992     RwCo rwco = {
4993         .bs = bs,
4994         .ret = NOT_DONE,
4995     };
4996 
4997     if (qemu_in_coroutine()) {
4998         /* Fast-path if already in coroutine context */
4999         bdrv_flush_co_entry(&rwco);
5000     } else {
5001         AioContext *aio_context = bdrv_get_aio_context(bs);
5002 
5003         co = qemu_coroutine_create(bdrv_flush_co_entry);
5004         qemu_coroutine_enter(co, &rwco);
5005         while (rwco.ret == NOT_DONE) {
5006             aio_poll(aio_context, true);
5007         }
5008     }
5009 
5010     return rwco.ret;
5011 }
5012 
5013 typedef struct DiscardCo {
5014     BlockDriverState *bs;
5015     int64_t sector_num;
5016     int nb_sectors;
5017     int ret;
5018 } DiscardCo;
5019 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5020 {
5021     DiscardCo *rwco = opaque;
5022 
5023     rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5024 }
5025 
5026 /* if no limit is specified in the BlockLimits use a default
5027  * of 32768 512-byte sectors (16 MiB) per request.
5028  */
5029 #define MAX_DISCARD_DEFAULT 32768
5030 
5031 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5032                                  int nb_sectors)
5033 {
5034     int max_discard;
5035 
5036     if (!bs->drv) {
5037         return -ENOMEDIUM;
5038     } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5039         return -EIO;
5040     } else if (bs->read_only) {
5041         return -EROFS;
5042     }
5043 
5044     bdrv_reset_dirty(bs, sector_num, nb_sectors);
5045 
5046     /* Do nothing if disabled.  */
5047     if (!(bs->open_flags & BDRV_O_UNMAP)) {
5048         return 0;
5049     }
5050 
5051     if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5052         return 0;
5053     }
5054 
5055     max_discard = bs->bl.max_discard ?  bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5056     while (nb_sectors > 0) {
5057         int ret;
5058         int num = nb_sectors;
5059 
5060         /* align request */
5061         if (bs->bl.discard_alignment &&
5062             num >= bs->bl.discard_alignment &&
5063             sector_num % bs->bl.discard_alignment) {
5064             if (num > bs->bl.discard_alignment) {
5065                 num = bs->bl.discard_alignment;
5066             }
5067             num -= sector_num % bs->bl.discard_alignment;
5068         }
5069 
5070         /* limit request size */
5071         if (num > max_discard) {
5072             num = max_discard;
5073         }
5074 
5075         if (bs->drv->bdrv_co_discard) {
5076             ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5077         } else {
5078             BlockDriverAIOCB *acb;
5079             CoroutineIOCompletion co = {
5080                 .coroutine = qemu_coroutine_self(),
5081             };
5082 
5083             acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5084                                             bdrv_co_io_em_complete, &co);
5085             if (acb == NULL) {
5086                 return -EIO;
5087             } else {
5088                 qemu_coroutine_yield();
5089                 ret = co.ret;
5090             }
5091         }
5092         if (ret && ret != -ENOTSUP) {
5093             return ret;
5094         }
5095 
5096         sector_num += num;
5097         nb_sectors -= num;
5098     }
5099     return 0;
5100 }
5101 
5102 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5103 {
5104     Coroutine *co;
5105     DiscardCo rwco = {
5106         .bs = bs,
5107         .sector_num = sector_num,
5108         .nb_sectors = nb_sectors,
5109         .ret = NOT_DONE,
5110     };
5111 
5112     if (qemu_in_coroutine()) {
5113         /* Fast-path if already in coroutine context */
5114         bdrv_discard_co_entry(&rwco);
5115     } else {
5116         AioContext *aio_context = bdrv_get_aio_context(bs);
5117 
5118         co = qemu_coroutine_create(bdrv_discard_co_entry);
5119         qemu_coroutine_enter(co, &rwco);
5120         while (rwco.ret == NOT_DONE) {
5121             aio_poll(aio_context, true);
5122         }
5123     }
5124 
5125     return rwco.ret;
5126 }
5127 
5128 /**************************************************************/
5129 /* removable device support */
5130 
5131 /**
5132  * Return TRUE if the media is present
5133  */
5134 int bdrv_is_inserted(BlockDriverState *bs)
5135 {
5136     BlockDriver *drv = bs->drv;
5137 
5138     if (!drv)
5139         return 0;
5140     if (!drv->bdrv_is_inserted)
5141         return 1;
5142     return drv->bdrv_is_inserted(bs);
5143 }
5144 
5145 /**
5146  * Return whether the media changed since the last call to this
5147  * function, or -ENOTSUP if we don't know.  Most drivers don't know.
5148  */
5149 int bdrv_media_changed(BlockDriverState *bs)
5150 {
5151     BlockDriver *drv = bs->drv;
5152 
5153     if (drv && drv->bdrv_media_changed) {
5154         return drv->bdrv_media_changed(bs);
5155     }
5156     return -ENOTSUP;
5157 }
5158 
5159 /**
5160  * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5161  */
5162 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5163 {
5164     BlockDriver *drv = bs->drv;
5165 
5166     if (drv && drv->bdrv_eject) {
5167         drv->bdrv_eject(bs, eject_flag);
5168     }
5169 
5170     if (bs->device_name[0] != '\0') {
5171         qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5172                                           eject_flag, &error_abort);
5173     }
5174 }
5175 
5176 /**
5177  * Lock or unlock the media (if it is locked, the user won't be able
5178  * to eject it manually).
5179  */
5180 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5181 {
5182     BlockDriver *drv = bs->drv;
5183 
5184     trace_bdrv_lock_medium(bs, locked);
5185 
5186     if (drv && drv->bdrv_lock_medium) {
5187         drv->bdrv_lock_medium(bs, locked);
5188     }
5189 }
5190 
5191 /* needed for generic scsi interface */
5192 
5193 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5194 {
5195     BlockDriver *drv = bs->drv;
5196 
5197     if (drv && drv->bdrv_ioctl)
5198         return drv->bdrv_ioctl(bs, req, buf);
5199     return -ENOTSUP;
5200 }
5201 
5202 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5203         unsigned long int req, void *buf,
5204         BlockDriverCompletionFunc *cb, void *opaque)
5205 {
5206     BlockDriver *drv = bs->drv;
5207 
5208     if (drv && drv->bdrv_aio_ioctl)
5209         return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5210     return NULL;
5211 }
5212 
5213 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5214 {
5215     bs->guest_block_size = align;
5216 }
5217 
5218 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5219 {
5220     return qemu_memalign(bdrv_opt_mem_align(bs), size);
5221 }
5222 
5223 /*
5224  * Check if all memory in this vector is sector aligned.
5225  */
5226 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5227 {
5228     int i;
5229     size_t alignment = bdrv_opt_mem_align(bs);
5230 
5231     for (i = 0; i < qiov->niov; i++) {
5232         if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5233             return false;
5234         }
5235         if (qiov->iov[i].iov_len % alignment) {
5236             return false;
5237         }
5238     }
5239 
5240     return true;
5241 }
5242 
5243 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5244                                           Error **errp)
5245 {
5246     int64_t bitmap_size;
5247     BdrvDirtyBitmap *bitmap;
5248 
5249     assert((granularity & (granularity - 1)) == 0);
5250 
5251     granularity >>= BDRV_SECTOR_BITS;
5252     assert(granularity);
5253     bitmap_size = bdrv_getlength(bs);
5254     if (bitmap_size < 0) {
5255         error_setg_errno(errp, -bitmap_size, "could not get length of device");
5256         errno = -bitmap_size;
5257         return NULL;
5258     }
5259     bitmap_size >>= BDRV_SECTOR_BITS;
5260     bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5261     bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5262     QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5263     return bitmap;
5264 }
5265 
5266 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5267 {
5268     BdrvDirtyBitmap *bm, *next;
5269     QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5270         if (bm == bitmap) {
5271             QLIST_REMOVE(bitmap, list);
5272             hbitmap_free(bitmap->bitmap);
5273             g_free(bitmap);
5274             return;
5275         }
5276     }
5277 }
5278 
5279 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5280 {
5281     BdrvDirtyBitmap *bm;
5282     BlockDirtyInfoList *list = NULL;
5283     BlockDirtyInfoList **plist = &list;
5284 
5285     QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5286         BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5287         BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5288         info->count = bdrv_get_dirty_count(bs, bm);
5289         info->granularity =
5290             ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5291         entry->value = info;
5292         *plist = entry;
5293         plist = &entry->next;
5294     }
5295 
5296     return list;
5297 }
5298 
5299 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5300 {
5301     if (bitmap) {
5302         return hbitmap_get(bitmap->bitmap, sector);
5303     } else {
5304         return 0;
5305     }
5306 }
5307 
5308 void bdrv_dirty_iter_init(BlockDriverState *bs,
5309                           BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5310 {
5311     hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5312 }
5313 
5314 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5315                     int nr_sectors)
5316 {
5317     BdrvDirtyBitmap *bitmap;
5318     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5319         hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5320     }
5321 }
5322 
5323 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5324 {
5325     BdrvDirtyBitmap *bitmap;
5326     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5327         hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5328     }
5329 }
5330 
5331 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5332 {
5333     return hbitmap_count(bitmap->bitmap);
5334 }
5335 
5336 /* Get a reference to bs */
5337 void bdrv_ref(BlockDriverState *bs)
5338 {
5339     bs->refcnt++;
5340 }
5341 
5342 /* Release a previously grabbed reference to bs.
5343  * If after releasing, reference count is zero, the BlockDriverState is
5344  * deleted. */
5345 void bdrv_unref(BlockDriverState *bs)
5346 {
5347     assert(bs->refcnt > 0);
5348     if (--bs->refcnt == 0) {
5349         bdrv_delete(bs);
5350     }
5351 }
5352 
5353 struct BdrvOpBlocker {
5354     Error *reason;
5355     QLIST_ENTRY(BdrvOpBlocker) list;
5356 };
5357 
5358 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5359 {
5360     BdrvOpBlocker *blocker;
5361     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5362     if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5363         blocker = QLIST_FIRST(&bs->op_blockers[op]);
5364         if (errp) {
5365             error_setg(errp, "Device '%s' is busy: %s",
5366                        bs->device_name, error_get_pretty(blocker->reason));
5367         }
5368         return true;
5369     }
5370     return false;
5371 }
5372 
5373 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5374 {
5375     BdrvOpBlocker *blocker;
5376     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5377 
5378     blocker = g_malloc0(sizeof(BdrvOpBlocker));
5379     blocker->reason = reason;
5380     QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5381 }
5382 
5383 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5384 {
5385     BdrvOpBlocker *blocker, *next;
5386     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5387     QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5388         if (blocker->reason == reason) {
5389             QLIST_REMOVE(blocker, list);
5390             g_free(blocker);
5391         }
5392     }
5393 }
5394 
5395 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5396 {
5397     int i;
5398     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5399         bdrv_op_block(bs, i, reason);
5400     }
5401 }
5402 
5403 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5404 {
5405     int i;
5406     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5407         bdrv_op_unblock(bs, i, reason);
5408     }
5409 }
5410 
5411 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5412 {
5413     int i;
5414 
5415     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5416         if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5417             return false;
5418         }
5419     }
5420     return true;
5421 }
5422 
5423 void bdrv_iostatus_enable(BlockDriverState *bs)
5424 {
5425     bs->iostatus_enabled = true;
5426     bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5427 }
5428 
5429 /* The I/O status is only enabled if the drive explicitly
5430  * enables it _and_ the VM is configured to stop on errors */
5431 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5432 {
5433     return (bs->iostatus_enabled &&
5434            (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5435             bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
5436             bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5437 }
5438 
5439 void bdrv_iostatus_disable(BlockDriverState *bs)
5440 {
5441     bs->iostatus_enabled = false;
5442 }
5443 
5444 void bdrv_iostatus_reset(BlockDriverState *bs)
5445 {
5446     if (bdrv_iostatus_is_enabled(bs)) {
5447         bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5448         if (bs->job) {
5449             block_job_iostatus_reset(bs->job);
5450         }
5451     }
5452 }
5453 
5454 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5455 {
5456     assert(bdrv_iostatus_is_enabled(bs));
5457     if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5458         bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5459                                          BLOCK_DEVICE_IO_STATUS_FAILED;
5460     }
5461 }
5462 
5463 void
5464 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5465         enum BlockAcctType type)
5466 {
5467     assert(type < BDRV_MAX_IOTYPE);
5468 
5469     cookie->bytes = bytes;
5470     cookie->start_time_ns = get_clock();
5471     cookie->type = type;
5472 }
5473 
5474 void
5475 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5476 {
5477     assert(cookie->type < BDRV_MAX_IOTYPE);
5478 
5479     bs->nr_bytes[cookie->type] += cookie->bytes;
5480     bs->nr_ops[cookie->type]++;
5481     bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5482 }
5483 
5484 void bdrv_img_create(const char *filename, const char *fmt,
5485                      const char *base_filename, const char *base_fmt,
5486                      char *options, uint64_t img_size, int flags,
5487                      Error **errp, bool quiet)
5488 {
5489     QemuOptsList *create_opts = NULL;
5490     QemuOpts *opts = NULL;
5491     const char *backing_fmt, *backing_file;
5492     int64_t size;
5493     BlockDriver *drv, *proto_drv;
5494     BlockDriver *backing_drv = NULL;
5495     Error *local_err = NULL;
5496     int ret = 0;
5497 
5498     /* Find driver and parse its options */
5499     drv = bdrv_find_format(fmt);
5500     if (!drv) {
5501         error_setg(errp, "Unknown file format '%s'", fmt);
5502         return;
5503     }
5504 
5505     proto_drv = bdrv_find_protocol(filename, true);
5506     if (!proto_drv) {
5507         error_setg(errp, "Unknown protocol '%s'", filename);
5508         return;
5509     }
5510 
5511     create_opts = qemu_opts_append(create_opts, drv->create_opts);
5512     create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5513 
5514     /* Create parameter list with default values */
5515     opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5516     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5517 
5518     /* Parse -o options */
5519     if (options) {
5520         if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5521             error_setg(errp, "Invalid options for file format '%s'", fmt);
5522             goto out;
5523         }
5524     }
5525 
5526     if (base_filename) {
5527         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5528             error_setg(errp, "Backing file not supported for file format '%s'",
5529                        fmt);
5530             goto out;
5531         }
5532     }
5533 
5534     if (base_fmt) {
5535         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5536             error_setg(errp, "Backing file format not supported for file "
5537                              "format '%s'", fmt);
5538             goto out;
5539         }
5540     }
5541 
5542     backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5543     if (backing_file) {
5544         if (!strcmp(filename, backing_file)) {
5545             error_setg(errp, "Error: Trying to create an image with the "
5546                              "same filename as the backing file");
5547             goto out;
5548         }
5549     }
5550 
5551     backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5552     if (backing_fmt) {
5553         backing_drv = bdrv_find_format(backing_fmt);
5554         if (!backing_drv) {
5555             error_setg(errp, "Unknown backing file format '%s'",
5556                        backing_fmt);
5557             goto out;
5558         }
5559     }
5560 
5561     // The size for the image must always be specified, with one exception:
5562     // If we are using a backing file, we can obtain the size from there
5563     size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5564     if (size == -1) {
5565         if (backing_file) {
5566             BlockDriverState *bs;
5567             uint64_t size;
5568             int back_flags;
5569 
5570             /* backing files always opened read-only */
5571             back_flags =
5572                 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5573 
5574             bs = NULL;
5575             ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5576                             backing_drv, &local_err);
5577             if (ret < 0) {
5578                 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5579                                  backing_file,
5580                                  error_get_pretty(local_err));
5581                 error_free(local_err);
5582                 local_err = NULL;
5583                 goto out;
5584             }
5585             bdrv_get_geometry(bs, &size);
5586             size *= 512;
5587 
5588             qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5589 
5590             bdrv_unref(bs);
5591         } else {
5592             error_setg(errp, "Image creation needs a size parameter");
5593             goto out;
5594         }
5595     }
5596 
5597     if (!quiet) {
5598         printf("Formatting '%s', fmt=%s ", filename, fmt);
5599         qemu_opts_print(opts);
5600         puts("");
5601     }
5602 
5603     ret = bdrv_create(drv, filename, opts, &local_err);
5604 
5605     if (ret == -EFBIG) {
5606         /* This is generally a better message than whatever the driver would
5607          * deliver (especially because of the cluster_size_hint), since that
5608          * is most probably not much different from "image too large". */
5609         const char *cluster_size_hint = "";
5610         if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5611             cluster_size_hint = " (try using a larger cluster size)";
5612         }
5613         error_setg(errp, "The image size is too large for file format '%s'"
5614                    "%s", fmt, cluster_size_hint);
5615         error_free(local_err);
5616         local_err = NULL;
5617     }
5618 
5619 out:
5620     qemu_opts_del(opts);
5621     qemu_opts_free(create_opts);
5622     if (local_err) {
5623         error_propagate(errp, local_err);
5624     }
5625 }
5626 
5627 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5628 {
5629     return bs->aio_context;
5630 }
5631 
5632 void bdrv_detach_aio_context(BlockDriverState *bs)
5633 {
5634     if (!bs->drv) {
5635         return;
5636     }
5637 
5638     if (bs->io_limits_enabled) {
5639         throttle_detach_aio_context(&bs->throttle_state);
5640     }
5641     if (bs->drv->bdrv_detach_aio_context) {
5642         bs->drv->bdrv_detach_aio_context(bs);
5643     }
5644     if (bs->file) {
5645         bdrv_detach_aio_context(bs->file);
5646     }
5647     if (bs->backing_hd) {
5648         bdrv_detach_aio_context(bs->backing_hd);
5649     }
5650 
5651     bs->aio_context = NULL;
5652 }
5653 
5654 void bdrv_attach_aio_context(BlockDriverState *bs,
5655                              AioContext *new_context)
5656 {
5657     if (!bs->drv) {
5658         return;
5659     }
5660 
5661     bs->aio_context = new_context;
5662 
5663     if (bs->backing_hd) {
5664         bdrv_attach_aio_context(bs->backing_hd, new_context);
5665     }
5666     if (bs->file) {
5667         bdrv_attach_aio_context(bs->file, new_context);
5668     }
5669     if (bs->drv->bdrv_attach_aio_context) {
5670         bs->drv->bdrv_attach_aio_context(bs, new_context);
5671     }
5672     if (bs->io_limits_enabled) {
5673         throttle_attach_aio_context(&bs->throttle_state, new_context);
5674     }
5675 }
5676 
5677 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5678 {
5679     bdrv_drain_all(); /* ensure there are no in-flight requests */
5680 
5681     bdrv_detach_aio_context(bs);
5682 
5683     /* This function executes in the old AioContext so acquire the new one in
5684      * case it runs in a different thread.
5685      */
5686     aio_context_acquire(new_context);
5687     bdrv_attach_aio_context(bs, new_context);
5688     aio_context_release(new_context);
5689 }
5690 
5691 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5692                                     NotifierWithReturn *notifier)
5693 {
5694     notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5695 }
5696 
5697 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5698 {
5699     if (!bs->drv->bdrv_amend_options) {
5700         return -ENOTSUP;
5701     }
5702     return bs->drv->bdrv_amend_options(bs, opts);
5703 }
5704 
5705 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5706  * of block filter and by bdrv_is_first_non_filter.
5707  * It is used to test if the given bs is the candidate or recurse more in the
5708  * node graph.
5709  */
5710 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5711                                       BlockDriverState *candidate)
5712 {
5713     /* return false if basic checks fails */
5714     if (!bs || !bs->drv) {
5715         return false;
5716     }
5717 
5718     /* the code reached a non block filter driver -> check if the bs is
5719      * the same as the candidate. It's the recursion termination condition.
5720      */
5721     if (!bs->drv->is_filter) {
5722         return bs == candidate;
5723     }
5724     /* Down this path the driver is a block filter driver */
5725 
5726     /* If the block filter recursion method is defined use it to recurse down
5727      * the node graph.
5728      */
5729     if (bs->drv->bdrv_recurse_is_first_non_filter) {
5730         return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5731     }
5732 
5733     /* the driver is a block filter but don't allow to recurse -> return false
5734      */
5735     return false;
5736 }
5737 
5738 /* This function checks if the candidate is the first non filter bs down it's
5739  * bs chain. Since we don't have pointers to parents it explore all bs chains
5740  * from the top. Some filters can choose not to pass down the recursion.
5741  */
5742 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5743 {
5744     BlockDriverState *bs;
5745 
5746     /* walk down the bs forest recursively */
5747     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5748         bool perm;
5749 
5750         /* try to recurse in this top level bs */
5751         perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5752 
5753         /* candidate is the first non filter */
5754         if (perm) {
5755             return true;
5756         }
5757     }
5758 
5759     return false;
5760 }
5761 
5762 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5763 {
5764     BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5765     if (!to_replace_bs) {
5766         error_setg(errp, "Node name '%s' not found", node_name);
5767         return NULL;
5768     }
5769 
5770     if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5771         return NULL;
5772     }
5773 
5774     /* We don't want arbitrary node of the BDS chain to be replaced only the top
5775      * most non filter in order to prevent data corruption.
5776      * Another benefit is that this tests exclude backing files which are
5777      * blocked by the backing blockers.
5778      */
5779     if (!bdrv_is_first_non_filter(to_replace_bs)) {
5780         error_setg(errp, "Only top most non filter can be replaced");
5781         return NULL;
5782     }
5783 
5784     return to_replace_bs;
5785 }
5786 
5787 void bdrv_io_plug(BlockDriverState *bs)
5788 {
5789     BlockDriver *drv = bs->drv;
5790     if (drv && drv->bdrv_io_plug) {
5791         drv->bdrv_io_plug(bs);
5792     } else if (bs->file) {
5793         bdrv_io_plug(bs->file);
5794     }
5795 }
5796 
5797 void bdrv_io_unplug(BlockDriverState *bs)
5798 {
5799     BlockDriver *drv = bs->drv;
5800     if (drv && drv->bdrv_io_unplug) {
5801         drv->bdrv_io_unplug(bs);
5802     } else if (bs->file) {
5803         bdrv_io_unplug(bs->file);
5804     }
5805 }
5806 
5807 void bdrv_flush_io_queue(BlockDriverState *bs)
5808 {
5809     BlockDriver *drv = bs->drv;
5810     if (drv && drv->bdrv_flush_io_queue) {
5811         drv->bdrv_flush_io_queue(bs);
5812     } else if (bs->file) {
5813         bdrv_flush_io_queue(bs->file);
5814     }
5815 }
5816