1 /* 2 * QEMU System Emulator block driver 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "config-host.h" 25 #include "qemu-common.h" 26 #include "trace.h" 27 #include "monitor/monitor.h" 28 #include "block/block_int.h" 29 #include "block/blockjob.h" 30 #include "qemu/module.h" 31 #include "qapi/qmp/qjson.h" 32 #include "sysemu/sysemu.h" 33 #include "qemu/notify.h" 34 #include "block/coroutine.h" 35 #include "block/qapi.h" 36 #include "qmp-commands.h" 37 #include "qemu/timer.h" 38 39 #ifdef CONFIG_BSD 40 #include <sys/types.h> 41 #include <sys/stat.h> 42 #include <sys/ioctl.h> 43 #include <sys/queue.h> 44 #ifndef __DragonFly__ 45 #include <sys/disk.h> 46 #endif 47 #endif 48 49 #ifdef _WIN32 50 #include <windows.h> 51 #endif 52 53 struct BdrvDirtyBitmap { 54 HBitmap *bitmap; 55 QLIST_ENTRY(BdrvDirtyBitmap) list; 56 }; 57 58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */ 59 60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load); 61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, 62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 63 BlockDriverCompletionFunc *cb, void *opaque); 64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, 65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 66 BlockDriverCompletionFunc *cb, void *opaque); 67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, 68 int64_t sector_num, int nb_sectors, 69 QEMUIOVector *iov); 70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, 71 int64_t sector_num, int nb_sectors, 72 QEMUIOVector *iov); 73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, 74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 75 BdrvRequestFlags flags); 76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, 77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 78 BdrvRequestFlags flags); 79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, 80 int64_t sector_num, 81 QEMUIOVector *qiov, 82 int nb_sectors, 83 BdrvRequestFlags flags, 84 BlockDriverCompletionFunc *cb, 85 void *opaque, 86 bool is_write); 87 static void coroutine_fn bdrv_co_do_rw(void *opaque); 88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, 89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags); 90 91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states = 92 QTAILQ_HEAD_INITIALIZER(bdrv_states); 93 94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states = 95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states); 96 97 static QLIST_HEAD(, BlockDriver) bdrv_drivers = 98 QLIST_HEAD_INITIALIZER(bdrv_drivers); 99 100 /* If non-zero, use only whitelisted block drivers */ 101 static int use_bdrv_whitelist; 102 103 #ifdef _WIN32 104 static int is_windows_drive_prefix(const char *filename) 105 { 106 return (((filename[0] >= 'a' && filename[0] <= 'z') || 107 (filename[0] >= 'A' && filename[0] <= 'Z')) && 108 filename[1] == ':'); 109 } 110 111 int is_windows_drive(const char *filename) 112 { 113 if (is_windows_drive_prefix(filename) && 114 filename[2] == '\0') 115 return 1; 116 if (strstart(filename, "\\\\.\\", NULL) || 117 strstart(filename, "//./", NULL)) 118 return 1; 119 return 0; 120 } 121 #endif 122 123 /* throttling disk I/O limits */ 124 void bdrv_set_io_limits(BlockDriverState *bs, 125 ThrottleConfig *cfg) 126 { 127 int i; 128 129 throttle_config(&bs->throttle_state, cfg); 130 131 for (i = 0; i < 2; i++) { 132 qemu_co_enter_next(&bs->throttled_reqs[i]); 133 } 134 } 135 136 /* this function drain all the throttled IOs */ 137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs) 138 { 139 bool drained = false; 140 bool enabled = bs->io_limits_enabled; 141 int i; 142 143 bs->io_limits_enabled = false; 144 145 for (i = 0; i < 2; i++) { 146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) { 147 drained = true; 148 } 149 } 150 151 bs->io_limits_enabled = enabled; 152 153 return drained; 154 } 155 156 void bdrv_io_limits_disable(BlockDriverState *bs) 157 { 158 bs->io_limits_enabled = false; 159 160 bdrv_start_throttled_reqs(bs); 161 162 throttle_destroy(&bs->throttle_state); 163 } 164 165 static void bdrv_throttle_read_timer_cb(void *opaque) 166 { 167 BlockDriverState *bs = opaque; 168 qemu_co_enter_next(&bs->throttled_reqs[0]); 169 } 170 171 static void bdrv_throttle_write_timer_cb(void *opaque) 172 { 173 BlockDriverState *bs = opaque; 174 qemu_co_enter_next(&bs->throttled_reqs[1]); 175 } 176 177 /* should be called before bdrv_set_io_limits if a limit is set */ 178 void bdrv_io_limits_enable(BlockDriverState *bs) 179 { 180 assert(!bs->io_limits_enabled); 181 throttle_init(&bs->throttle_state, 182 QEMU_CLOCK_VIRTUAL, 183 bdrv_throttle_read_timer_cb, 184 bdrv_throttle_write_timer_cb, 185 bs); 186 bs->io_limits_enabled = true; 187 } 188 189 /* This function makes an IO wait if needed 190 * 191 * @nb_sectors: the number of sectors of the IO 192 * @is_write: is the IO a write 193 */ 194 static void bdrv_io_limits_intercept(BlockDriverState *bs, 195 unsigned int bytes, 196 bool is_write) 197 { 198 /* does this io must wait */ 199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write); 200 201 /* if must wait or any request of this type throttled queue the IO */ 202 if (must_wait || 203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) { 204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]); 205 } 206 207 /* the IO will be executed, do the accounting */ 208 throttle_account(&bs->throttle_state, is_write, bytes); 209 210 211 /* if the next request must wait -> do nothing */ 212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) { 213 return; 214 } 215 216 /* else queue next request for execution */ 217 qemu_co_queue_next(&bs->throttled_reqs[is_write]); 218 } 219 220 size_t bdrv_opt_mem_align(BlockDriverState *bs) 221 { 222 if (!bs || !bs->drv) { 223 /* 4k should be on the safe side */ 224 return 4096; 225 } 226 227 return bs->bl.opt_mem_alignment; 228 } 229 230 /* check if the path starts with "<protocol>:" */ 231 static int path_has_protocol(const char *path) 232 { 233 const char *p; 234 235 #ifdef _WIN32 236 if (is_windows_drive(path) || 237 is_windows_drive_prefix(path)) { 238 return 0; 239 } 240 p = path + strcspn(path, ":/\\"); 241 #else 242 p = path + strcspn(path, ":/"); 243 #endif 244 245 return *p == ':'; 246 } 247 248 int path_is_absolute(const char *path) 249 { 250 #ifdef _WIN32 251 /* specific case for names like: "\\.\d:" */ 252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) { 253 return 1; 254 } 255 return (*path == '/' || *path == '\\'); 256 #else 257 return (*path == '/'); 258 #endif 259 } 260 261 /* if filename is absolute, just copy it to dest. Otherwise, build a 262 path to it by considering it is relative to base_path. URL are 263 supported. */ 264 void path_combine(char *dest, int dest_size, 265 const char *base_path, 266 const char *filename) 267 { 268 const char *p, *p1; 269 int len; 270 271 if (dest_size <= 0) 272 return; 273 if (path_is_absolute(filename)) { 274 pstrcpy(dest, dest_size, filename); 275 } else { 276 p = strchr(base_path, ':'); 277 if (p) 278 p++; 279 else 280 p = base_path; 281 p1 = strrchr(base_path, '/'); 282 #ifdef _WIN32 283 { 284 const char *p2; 285 p2 = strrchr(base_path, '\\'); 286 if (!p1 || p2 > p1) 287 p1 = p2; 288 } 289 #endif 290 if (p1) 291 p1++; 292 else 293 p1 = base_path; 294 if (p1 > p) 295 p = p1; 296 len = p - base_path; 297 if (len > dest_size - 1) 298 len = dest_size - 1; 299 memcpy(dest, base_path, len); 300 dest[len] = '\0'; 301 pstrcat(dest, dest_size, filename); 302 } 303 } 304 305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz) 306 { 307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) { 308 pstrcpy(dest, sz, bs->backing_file); 309 } else { 310 path_combine(dest, sz, bs->filename, bs->backing_file); 311 } 312 } 313 314 void bdrv_register(BlockDriver *bdrv) 315 { 316 /* Block drivers without coroutine functions need emulation */ 317 if (!bdrv->bdrv_co_readv) { 318 bdrv->bdrv_co_readv = bdrv_co_readv_em; 319 bdrv->bdrv_co_writev = bdrv_co_writev_em; 320 321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if 322 * the block driver lacks aio we need to emulate that too. 323 */ 324 if (!bdrv->bdrv_aio_readv) { 325 /* add AIO emulation layer */ 326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em; 327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em; 328 } 329 } 330 331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list); 332 } 333 334 /* create a new block device (by default it is empty) */ 335 BlockDriverState *bdrv_new(const char *device_name, Error **errp) 336 { 337 BlockDriverState *bs; 338 339 if (bdrv_find(device_name)) { 340 error_setg(errp, "Device with id '%s' already exists", 341 device_name); 342 return NULL; 343 } 344 if (bdrv_find_node(device_name)) { 345 error_setg(errp, "Device with node-name '%s' already exists", 346 device_name); 347 return NULL; 348 } 349 350 bs = g_malloc0(sizeof(BlockDriverState)); 351 QLIST_INIT(&bs->dirty_bitmaps); 352 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name); 353 if (device_name[0] != '\0') { 354 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list); 355 } 356 bdrv_iostatus_disable(bs); 357 notifier_list_init(&bs->close_notifiers); 358 notifier_with_return_list_init(&bs->before_write_notifiers); 359 qemu_co_queue_init(&bs->throttled_reqs[0]); 360 qemu_co_queue_init(&bs->throttled_reqs[1]); 361 bs->refcnt = 1; 362 363 return bs; 364 } 365 366 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify) 367 { 368 notifier_list_add(&bs->close_notifiers, notify); 369 } 370 371 BlockDriver *bdrv_find_format(const char *format_name) 372 { 373 BlockDriver *drv1; 374 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 375 if (!strcmp(drv1->format_name, format_name)) { 376 return drv1; 377 } 378 } 379 return NULL; 380 } 381 382 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only) 383 { 384 static const char *whitelist_rw[] = { 385 CONFIG_BDRV_RW_WHITELIST 386 }; 387 static const char *whitelist_ro[] = { 388 CONFIG_BDRV_RO_WHITELIST 389 }; 390 const char **p; 391 392 if (!whitelist_rw[0] && !whitelist_ro[0]) { 393 return 1; /* no whitelist, anything goes */ 394 } 395 396 for (p = whitelist_rw; *p; p++) { 397 if (!strcmp(drv->format_name, *p)) { 398 return 1; 399 } 400 } 401 if (read_only) { 402 for (p = whitelist_ro; *p; p++) { 403 if (!strcmp(drv->format_name, *p)) { 404 return 1; 405 } 406 } 407 } 408 return 0; 409 } 410 411 BlockDriver *bdrv_find_whitelisted_format(const char *format_name, 412 bool read_only) 413 { 414 BlockDriver *drv = bdrv_find_format(format_name); 415 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL; 416 } 417 418 typedef struct CreateCo { 419 BlockDriver *drv; 420 char *filename; 421 QEMUOptionParameter *options; 422 int ret; 423 Error *err; 424 } CreateCo; 425 426 static void coroutine_fn bdrv_create_co_entry(void *opaque) 427 { 428 Error *local_err = NULL; 429 int ret; 430 431 CreateCo *cco = opaque; 432 assert(cco->drv); 433 434 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err); 435 if (local_err) { 436 error_propagate(&cco->err, local_err); 437 } 438 cco->ret = ret; 439 } 440 441 int bdrv_create(BlockDriver *drv, const char* filename, 442 QEMUOptionParameter *options, Error **errp) 443 { 444 int ret; 445 446 Coroutine *co; 447 CreateCo cco = { 448 .drv = drv, 449 .filename = g_strdup(filename), 450 .options = options, 451 .ret = NOT_DONE, 452 .err = NULL, 453 }; 454 455 if (!drv->bdrv_create) { 456 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name); 457 ret = -ENOTSUP; 458 goto out; 459 } 460 461 if (qemu_in_coroutine()) { 462 /* Fast-path if already in coroutine context */ 463 bdrv_create_co_entry(&cco); 464 } else { 465 co = qemu_coroutine_create(bdrv_create_co_entry); 466 qemu_coroutine_enter(co, &cco); 467 while (cco.ret == NOT_DONE) { 468 qemu_aio_wait(); 469 } 470 } 471 472 ret = cco.ret; 473 if (ret < 0) { 474 if (cco.err) { 475 error_propagate(errp, cco.err); 476 } else { 477 error_setg_errno(errp, -ret, "Could not create image"); 478 } 479 } 480 481 out: 482 g_free(cco.filename); 483 return ret; 484 } 485 486 int bdrv_create_file(const char* filename, QEMUOptionParameter *options, 487 Error **errp) 488 { 489 BlockDriver *drv; 490 Error *local_err = NULL; 491 int ret; 492 493 drv = bdrv_find_protocol(filename, true); 494 if (drv == NULL) { 495 error_setg(errp, "Could not find protocol for file '%s'", filename); 496 return -ENOENT; 497 } 498 499 ret = bdrv_create(drv, filename, options, &local_err); 500 if (local_err) { 501 error_propagate(errp, local_err); 502 } 503 return ret; 504 } 505 506 int bdrv_refresh_limits(BlockDriverState *bs) 507 { 508 BlockDriver *drv = bs->drv; 509 510 memset(&bs->bl, 0, sizeof(bs->bl)); 511 512 if (!drv) { 513 return 0; 514 } 515 516 /* Take some limits from the children as a default */ 517 if (bs->file) { 518 bdrv_refresh_limits(bs->file); 519 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length; 520 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment; 521 } else { 522 bs->bl.opt_mem_alignment = 512; 523 } 524 525 if (bs->backing_hd) { 526 bdrv_refresh_limits(bs->backing_hd); 527 bs->bl.opt_transfer_length = 528 MAX(bs->bl.opt_transfer_length, 529 bs->backing_hd->bl.opt_transfer_length); 530 bs->bl.opt_mem_alignment = 531 MAX(bs->bl.opt_mem_alignment, 532 bs->backing_hd->bl.opt_mem_alignment); 533 } 534 535 /* Then let the driver override it */ 536 if (drv->bdrv_refresh_limits) { 537 return drv->bdrv_refresh_limits(bs); 538 } 539 540 return 0; 541 } 542 543 /* 544 * Create a uniquely-named empty temporary file. 545 * Return 0 upon success, otherwise a negative errno value. 546 */ 547 int get_tmp_filename(char *filename, int size) 548 { 549 #ifdef _WIN32 550 char temp_dir[MAX_PATH]; 551 /* GetTempFileName requires that its output buffer (4th param) 552 have length MAX_PATH or greater. */ 553 assert(size >= MAX_PATH); 554 return (GetTempPath(MAX_PATH, temp_dir) 555 && GetTempFileName(temp_dir, "qem", 0, filename) 556 ? 0 : -GetLastError()); 557 #else 558 int fd; 559 const char *tmpdir; 560 tmpdir = getenv("TMPDIR"); 561 if (!tmpdir) { 562 tmpdir = "/var/tmp"; 563 } 564 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) { 565 return -EOVERFLOW; 566 } 567 fd = mkstemp(filename); 568 if (fd < 0) { 569 return -errno; 570 } 571 if (close(fd) != 0) { 572 unlink(filename); 573 return -errno; 574 } 575 return 0; 576 #endif 577 } 578 579 /* 580 * Detect host devices. By convention, /dev/cdrom[N] is always 581 * recognized as a host CDROM. 582 */ 583 static BlockDriver *find_hdev_driver(const char *filename) 584 { 585 int score_max = 0, score; 586 BlockDriver *drv = NULL, *d; 587 588 QLIST_FOREACH(d, &bdrv_drivers, list) { 589 if (d->bdrv_probe_device) { 590 score = d->bdrv_probe_device(filename); 591 if (score > score_max) { 592 score_max = score; 593 drv = d; 594 } 595 } 596 } 597 598 return drv; 599 } 600 601 BlockDriver *bdrv_find_protocol(const char *filename, 602 bool allow_protocol_prefix) 603 { 604 BlockDriver *drv1; 605 char protocol[128]; 606 int len; 607 const char *p; 608 609 /* TODO Drivers without bdrv_file_open must be specified explicitly */ 610 611 /* 612 * XXX(hch): we really should not let host device detection 613 * override an explicit protocol specification, but moving this 614 * later breaks access to device names with colons in them. 615 * Thanks to the brain-dead persistent naming schemes on udev- 616 * based Linux systems those actually are quite common. 617 */ 618 drv1 = find_hdev_driver(filename); 619 if (drv1) { 620 return drv1; 621 } 622 623 if (!path_has_protocol(filename) || !allow_protocol_prefix) { 624 return bdrv_find_format("file"); 625 } 626 627 p = strchr(filename, ':'); 628 assert(p != NULL); 629 len = p - filename; 630 if (len > sizeof(protocol) - 1) 631 len = sizeof(protocol) - 1; 632 memcpy(protocol, filename, len); 633 protocol[len] = '\0'; 634 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 635 if (drv1->protocol_name && 636 !strcmp(drv1->protocol_name, protocol)) { 637 return drv1; 638 } 639 } 640 return NULL; 641 } 642 643 static int find_image_format(BlockDriverState *bs, const char *filename, 644 BlockDriver **pdrv, Error **errp) 645 { 646 int score, score_max; 647 BlockDriver *drv1, *drv; 648 uint8_t buf[2048]; 649 int ret = 0; 650 651 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */ 652 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) { 653 drv = bdrv_find_format("raw"); 654 if (!drv) { 655 error_setg(errp, "Could not find raw image format"); 656 ret = -ENOENT; 657 } 658 *pdrv = drv; 659 return ret; 660 } 661 662 ret = bdrv_pread(bs, 0, buf, sizeof(buf)); 663 if (ret < 0) { 664 error_setg_errno(errp, -ret, "Could not read image for determining its " 665 "format"); 666 *pdrv = NULL; 667 return ret; 668 } 669 670 score_max = 0; 671 drv = NULL; 672 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 673 if (drv1->bdrv_probe) { 674 score = drv1->bdrv_probe(buf, ret, filename); 675 if (score > score_max) { 676 score_max = score; 677 drv = drv1; 678 } 679 } 680 } 681 if (!drv) { 682 error_setg(errp, "Could not determine image format: No compatible " 683 "driver found"); 684 ret = -ENOENT; 685 } 686 *pdrv = drv; 687 return ret; 688 } 689 690 /** 691 * Set the current 'total_sectors' value 692 */ 693 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint) 694 { 695 BlockDriver *drv = bs->drv; 696 697 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */ 698 if (bs->sg) 699 return 0; 700 701 /* query actual device if possible, otherwise just trust the hint */ 702 if (drv->bdrv_getlength) { 703 int64_t length = drv->bdrv_getlength(bs); 704 if (length < 0) { 705 return length; 706 } 707 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE); 708 } 709 710 bs->total_sectors = hint; 711 return 0; 712 } 713 714 /** 715 * Set open flags for a given discard mode 716 * 717 * Return 0 on success, -1 if the discard mode was invalid. 718 */ 719 int bdrv_parse_discard_flags(const char *mode, int *flags) 720 { 721 *flags &= ~BDRV_O_UNMAP; 722 723 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) { 724 /* do nothing */ 725 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) { 726 *flags |= BDRV_O_UNMAP; 727 } else { 728 return -1; 729 } 730 731 return 0; 732 } 733 734 /** 735 * Set open flags for a given cache mode 736 * 737 * Return 0 on success, -1 if the cache mode was invalid. 738 */ 739 int bdrv_parse_cache_flags(const char *mode, int *flags) 740 { 741 *flags &= ~BDRV_O_CACHE_MASK; 742 743 if (!strcmp(mode, "off") || !strcmp(mode, "none")) { 744 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB; 745 } else if (!strcmp(mode, "directsync")) { 746 *flags |= BDRV_O_NOCACHE; 747 } else if (!strcmp(mode, "writeback")) { 748 *flags |= BDRV_O_CACHE_WB; 749 } else if (!strcmp(mode, "unsafe")) { 750 *flags |= BDRV_O_CACHE_WB; 751 *flags |= BDRV_O_NO_FLUSH; 752 } else if (!strcmp(mode, "writethrough")) { 753 /* this is the default */ 754 } else { 755 return -1; 756 } 757 758 return 0; 759 } 760 761 /** 762 * The copy-on-read flag is actually a reference count so multiple users may 763 * use the feature without worrying about clobbering its previous state. 764 * Copy-on-read stays enabled until all users have called to disable it. 765 */ 766 void bdrv_enable_copy_on_read(BlockDriverState *bs) 767 { 768 bs->copy_on_read++; 769 } 770 771 void bdrv_disable_copy_on_read(BlockDriverState *bs) 772 { 773 assert(bs->copy_on_read > 0); 774 bs->copy_on_read--; 775 } 776 777 /* 778 * Returns the flags that a temporary snapshot should get, based on the 779 * originally requested flags (the originally requested image will have flags 780 * like a backing file) 781 */ 782 static int bdrv_temp_snapshot_flags(int flags) 783 { 784 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY; 785 } 786 787 /* 788 * Returns the flags that bs->file should get, based on the given flags for 789 * the parent BDS 790 */ 791 static int bdrv_inherited_flags(int flags) 792 { 793 /* Enable protocol handling, disable format probing for bs->file */ 794 flags |= BDRV_O_PROTOCOL; 795 796 /* Our block drivers take care to send flushes and respect unmap policy, 797 * so we can enable both unconditionally on lower layers. */ 798 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP; 799 800 /* Clear flags that only apply to the top layer */ 801 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ); 802 803 return flags; 804 } 805 806 /* 807 * Returns the flags that bs->backing_hd should get, based on the given flags 808 * for the parent BDS 809 */ 810 static int bdrv_backing_flags(int flags) 811 { 812 /* backing files always opened read-only */ 813 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ); 814 815 /* snapshot=on is handled on the top layer */ 816 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY); 817 818 return flags; 819 } 820 821 static int bdrv_open_flags(BlockDriverState *bs, int flags) 822 { 823 int open_flags = flags | BDRV_O_CACHE_WB; 824 825 /* 826 * Clear flags that are internal to the block layer before opening the 827 * image. 828 */ 829 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING); 830 831 /* 832 * Snapshots should be writable. 833 */ 834 if (flags & BDRV_O_TEMPORARY) { 835 open_flags |= BDRV_O_RDWR; 836 } 837 838 return open_flags; 839 } 840 841 static void bdrv_assign_node_name(BlockDriverState *bs, 842 const char *node_name, 843 Error **errp) 844 { 845 if (!node_name) { 846 return; 847 } 848 849 /* empty string node name is invalid */ 850 if (node_name[0] == '\0') { 851 error_setg(errp, "Empty node name"); 852 return; 853 } 854 855 /* takes care of avoiding namespaces collisions */ 856 if (bdrv_find(node_name)) { 857 error_setg(errp, "node-name=%s is conflicting with a device id", 858 node_name); 859 return; 860 } 861 862 /* takes care of avoiding duplicates node names */ 863 if (bdrv_find_node(node_name)) { 864 error_setg(errp, "Duplicate node name"); 865 return; 866 } 867 868 /* copy node name into the bs and insert it into the graph list */ 869 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name); 870 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list); 871 } 872 873 /* 874 * Common part for opening disk images and files 875 * 876 * Removes all processed options from *options. 877 */ 878 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file, 879 QDict *options, int flags, BlockDriver *drv, Error **errp) 880 { 881 int ret, open_flags; 882 const char *filename; 883 const char *node_name = NULL; 884 Error *local_err = NULL; 885 886 assert(drv != NULL); 887 assert(bs->file == NULL); 888 assert(options != NULL && bs->options != options); 889 890 if (file != NULL) { 891 filename = file->filename; 892 } else { 893 filename = qdict_get_try_str(options, "filename"); 894 } 895 896 if (drv->bdrv_needs_filename && !filename) { 897 error_setg(errp, "The '%s' block driver requires a file name", 898 drv->format_name); 899 return -EINVAL; 900 } 901 902 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name); 903 904 node_name = qdict_get_try_str(options, "node-name"); 905 bdrv_assign_node_name(bs, node_name, &local_err); 906 if (local_err) { 907 error_propagate(errp, local_err); 908 return -EINVAL; 909 } 910 qdict_del(options, "node-name"); 911 912 /* bdrv_open() with directly using a protocol as drv. This layer is already 913 * opened, so assign it to bs (while file becomes a closed BlockDriverState) 914 * and return immediately. */ 915 if (file != NULL && drv->bdrv_file_open) { 916 bdrv_swap(file, bs); 917 return 0; 918 } 919 920 bs->open_flags = flags; 921 bs->guest_block_size = 512; 922 bs->request_alignment = 512; 923 bs->zero_beyond_eof = true; 924 open_flags = bdrv_open_flags(bs, flags); 925 bs->read_only = !(open_flags & BDRV_O_RDWR); 926 927 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) { 928 error_setg(errp, 929 !bs->read_only && bdrv_is_whitelisted(drv, true) 930 ? "Driver '%s' can only be used for read-only devices" 931 : "Driver '%s' is not whitelisted", 932 drv->format_name); 933 return -ENOTSUP; 934 } 935 936 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */ 937 if (flags & BDRV_O_COPY_ON_READ) { 938 if (!bs->read_only) { 939 bdrv_enable_copy_on_read(bs); 940 } else { 941 error_setg(errp, "Can't use copy-on-read on read-only device"); 942 return -EINVAL; 943 } 944 } 945 946 if (filename != NULL) { 947 pstrcpy(bs->filename, sizeof(bs->filename), filename); 948 } else { 949 bs->filename[0] = '\0'; 950 } 951 952 bs->drv = drv; 953 bs->opaque = g_malloc0(drv->instance_size); 954 955 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB); 956 957 /* Open the image, either directly or using a protocol */ 958 if (drv->bdrv_file_open) { 959 assert(file == NULL); 960 assert(!drv->bdrv_needs_filename || filename != NULL); 961 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err); 962 } else { 963 if (file == NULL) { 964 error_setg(errp, "Can't use '%s' as a block driver for the " 965 "protocol level", drv->format_name); 966 ret = -EINVAL; 967 goto free_and_fail; 968 } 969 bs->file = file; 970 ret = drv->bdrv_open(bs, options, open_flags, &local_err); 971 } 972 973 if (ret < 0) { 974 if (local_err) { 975 error_propagate(errp, local_err); 976 } else if (bs->filename[0]) { 977 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename); 978 } else { 979 error_setg_errno(errp, -ret, "Could not open image"); 980 } 981 goto free_and_fail; 982 } 983 984 ret = refresh_total_sectors(bs, bs->total_sectors); 985 if (ret < 0) { 986 error_setg_errno(errp, -ret, "Could not refresh total sector count"); 987 goto free_and_fail; 988 } 989 990 bdrv_refresh_limits(bs); 991 assert(bdrv_opt_mem_align(bs) != 0); 992 assert((bs->request_alignment != 0) || bs->sg); 993 return 0; 994 995 free_and_fail: 996 bs->file = NULL; 997 g_free(bs->opaque); 998 bs->opaque = NULL; 999 bs->drv = NULL; 1000 return ret; 1001 } 1002 1003 /* 1004 * Opens a file using a protocol (file, host_device, nbd, ...) 1005 * 1006 * options is an indirect pointer to a QDict of options to pass to the block 1007 * drivers, or pointer to NULL for an empty set of options. If this function 1008 * takes ownership of the QDict reference, it will set *options to NULL; 1009 * otherwise, it will contain unused/unrecognized options after this function 1010 * returns. Then, the caller is responsible for freeing it. If it intends to 1011 * reuse the QDict, QINCREF() should be called beforehand. 1012 */ 1013 static int bdrv_file_open(BlockDriverState *bs, const char *filename, 1014 QDict **options, int flags, Error **errp) 1015 { 1016 BlockDriver *drv; 1017 const char *drvname; 1018 bool parse_filename = false; 1019 Error *local_err = NULL; 1020 int ret; 1021 1022 /* Fetch the file name from the options QDict if necessary */ 1023 if (!filename) { 1024 filename = qdict_get_try_str(*options, "filename"); 1025 } else if (filename && !qdict_haskey(*options, "filename")) { 1026 qdict_put(*options, "filename", qstring_from_str(filename)); 1027 parse_filename = true; 1028 } else { 1029 error_setg(errp, "Can't specify 'file' and 'filename' options at the " 1030 "same time"); 1031 ret = -EINVAL; 1032 goto fail; 1033 } 1034 1035 /* Find the right block driver */ 1036 drvname = qdict_get_try_str(*options, "driver"); 1037 if (drvname) { 1038 drv = bdrv_find_format(drvname); 1039 if (!drv) { 1040 error_setg(errp, "Unknown driver '%s'", drvname); 1041 } 1042 qdict_del(*options, "driver"); 1043 } else if (filename) { 1044 drv = bdrv_find_protocol(filename, parse_filename); 1045 if (!drv) { 1046 error_setg(errp, "Unknown protocol"); 1047 } 1048 } else { 1049 error_setg(errp, "Must specify either driver or file"); 1050 drv = NULL; 1051 } 1052 1053 if (!drv) { 1054 /* errp has been set already */ 1055 ret = -ENOENT; 1056 goto fail; 1057 } 1058 1059 /* Parse the filename and open it */ 1060 if (drv->bdrv_parse_filename && parse_filename) { 1061 drv->bdrv_parse_filename(filename, *options, &local_err); 1062 if (local_err) { 1063 error_propagate(errp, local_err); 1064 ret = -EINVAL; 1065 goto fail; 1066 } 1067 1068 if (!drv->bdrv_needs_filename) { 1069 qdict_del(*options, "filename"); 1070 } else { 1071 filename = qdict_get_str(*options, "filename"); 1072 } 1073 } 1074 1075 if (!drv->bdrv_file_open) { 1076 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err); 1077 *options = NULL; 1078 } else { 1079 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err); 1080 } 1081 if (ret < 0) { 1082 error_propagate(errp, local_err); 1083 goto fail; 1084 } 1085 1086 bs->growable = 1; 1087 return 0; 1088 1089 fail: 1090 return ret; 1091 } 1092 1093 /* 1094 * Opens the backing file for a BlockDriverState if not yet open 1095 * 1096 * options is a QDict of options to pass to the block drivers, or NULL for an 1097 * empty set of options. The reference to the QDict is transferred to this 1098 * function (even on failure), so if the caller intends to reuse the dictionary, 1099 * it needs to use QINCREF() before calling bdrv_file_open. 1100 */ 1101 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp) 1102 { 1103 char *backing_filename = g_malloc0(PATH_MAX); 1104 int ret = 0; 1105 BlockDriver *back_drv = NULL; 1106 Error *local_err = NULL; 1107 1108 if (bs->backing_hd != NULL) { 1109 QDECREF(options); 1110 goto free_exit; 1111 } 1112 1113 /* NULL means an empty set of options */ 1114 if (options == NULL) { 1115 options = qdict_new(); 1116 } 1117 1118 bs->open_flags &= ~BDRV_O_NO_BACKING; 1119 if (qdict_haskey(options, "file.filename")) { 1120 backing_filename[0] = '\0'; 1121 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) { 1122 QDECREF(options); 1123 goto free_exit; 1124 } else { 1125 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX); 1126 } 1127 1128 if (bs->backing_format[0] != '\0') { 1129 back_drv = bdrv_find_format(bs->backing_format); 1130 } 1131 1132 assert(bs->backing_hd == NULL); 1133 ret = bdrv_open(&bs->backing_hd, 1134 *backing_filename ? backing_filename : NULL, NULL, options, 1135 bdrv_backing_flags(bs->open_flags), back_drv, &local_err); 1136 if (ret < 0) { 1137 bs->backing_hd = NULL; 1138 bs->open_flags |= BDRV_O_NO_BACKING; 1139 error_setg(errp, "Could not open backing file: %s", 1140 error_get_pretty(local_err)); 1141 error_free(local_err); 1142 goto free_exit; 1143 } 1144 1145 if (bs->backing_hd->file) { 1146 pstrcpy(bs->backing_file, sizeof(bs->backing_file), 1147 bs->backing_hd->file->filename); 1148 } 1149 1150 /* Recalculate the BlockLimits with the backing file */ 1151 bdrv_refresh_limits(bs); 1152 1153 free_exit: 1154 g_free(backing_filename); 1155 return ret; 1156 } 1157 1158 /* 1159 * Opens a disk image whose options are given as BlockdevRef in another block 1160 * device's options. 1161 * 1162 * If allow_none is true, no image will be opened if filename is false and no 1163 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned. 1164 * 1165 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict. 1166 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict 1167 * itself, all options starting with "${bdref_key}." are considered part of the 1168 * BlockdevRef. 1169 * 1170 * The BlockdevRef will be removed from the options QDict. 1171 * 1172 * To conform with the behavior of bdrv_open(), *pbs has to be NULL. 1173 */ 1174 int bdrv_open_image(BlockDriverState **pbs, const char *filename, 1175 QDict *options, const char *bdref_key, int flags, 1176 bool allow_none, Error **errp) 1177 { 1178 QDict *image_options; 1179 int ret; 1180 char *bdref_key_dot; 1181 const char *reference; 1182 1183 assert(pbs); 1184 assert(*pbs == NULL); 1185 1186 bdref_key_dot = g_strdup_printf("%s.", bdref_key); 1187 qdict_extract_subqdict(options, &image_options, bdref_key_dot); 1188 g_free(bdref_key_dot); 1189 1190 reference = qdict_get_try_str(options, bdref_key); 1191 if (!filename && !reference && !qdict_size(image_options)) { 1192 if (allow_none) { 1193 ret = 0; 1194 } else { 1195 error_setg(errp, "A block device must be specified for \"%s\"", 1196 bdref_key); 1197 ret = -EINVAL; 1198 } 1199 goto done; 1200 } 1201 1202 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp); 1203 1204 done: 1205 qdict_del(options, bdref_key); 1206 return ret; 1207 } 1208 1209 void bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp) 1210 { 1211 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */ 1212 char *tmp_filename = g_malloc0(PATH_MAX + 1); 1213 int64_t total_size; 1214 BlockDriver *bdrv_qcow2; 1215 QEMUOptionParameter *create_options; 1216 QDict *snapshot_options; 1217 BlockDriverState *bs_snapshot; 1218 Error *local_err; 1219 int ret; 1220 1221 /* if snapshot, we create a temporary backing file and open it 1222 instead of opening 'filename' directly */ 1223 1224 /* Get the required size from the image */ 1225 total_size = bdrv_getlength(bs); 1226 if (total_size < 0) { 1227 error_setg_errno(errp, -total_size, "Could not get image size"); 1228 goto out; 1229 } 1230 total_size &= BDRV_SECTOR_MASK; 1231 1232 /* Create the temporary image */ 1233 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1); 1234 if (ret < 0) { 1235 error_setg_errno(errp, -ret, "Could not get temporary filename"); 1236 goto out; 1237 } 1238 1239 bdrv_qcow2 = bdrv_find_format("qcow2"); 1240 create_options = parse_option_parameters("", bdrv_qcow2->create_options, 1241 NULL); 1242 1243 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size); 1244 1245 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err); 1246 free_option_parameters(create_options); 1247 if (ret < 0) { 1248 error_setg_errno(errp, -ret, "Could not create temporary overlay " 1249 "'%s': %s", tmp_filename, 1250 error_get_pretty(local_err)); 1251 error_free(local_err); 1252 goto out; 1253 } 1254 1255 /* Prepare a new options QDict for the temporary file */ 1256 snapshot_options = qdict_new(); 1257 qdict_put(snapshot_options, "file.driver", 1258 qstring_from_str("file")); 1259 qdict_put(snapshot_options, "file.filename", 1260 qstring_from_str(tmp_filename)); 1261 1262 bs_snapshot = bdrv_new("", &error_abort); 1263 1264 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options, 1265 flags, bdrv_qcow2, &local_err); 1266 if (ret < 0) { 1267 error_propagate(errp, local_err); 1268 goto out; 1269 } 1270 1271 bdrv_append(bs_snapshot, bs); 1272 1273 out: 1274 g_free(tmp_filename); 1275 } 1276 1277 /* 1278 * Opens a disk image (raw, qcow2, vmdk, ...) 1279 * 1280 * options is a QDict of options to pass to the block drivers, or NULL for an 1281 * empty set of options. The reference to the QDict belongs to the block layer 1282 * after the call (even on failure), so if the caller intends to reuse the 1283 * dictionary, it needs to use QINCREF() before calling bdrv_open. 1284 * 1285 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there. 1286 * If it is not NULL, the referenced BDS will be reused. 1287 * 1288 * The reference parameter may be used to specify an existing block device which 1289 * should be opened. If specified, neither options nor a filename may be given, 1290 * nor can an existing BDS be reused (that is, *pbs has to be NULL). 1291 */ 1292 int bdrv_open(BlockDriverState **pbs, const char *filename, 1293 const char *reference, QDict *options, int flags, 1294 BlockDriver *drv, Error **errp) 1295 { 1296 int ret; 1297 BlockDriverState *file = NULL, *bs; 1298 const char *drvname; 1299 Error *local_err = NULL; 1300 int snapshot_flags = 0; 1301 1302 assert(pbs); 1303 1304 if (reference) { 1305 bool options_non_empty = options ? qdict_size(options) : false; 1306 QDECREF(options); 1307 1308 if (*pbs) { 1309 error_setg(errp, "Cannot reuse an existing BDS when referencing " 1310 "another block device"); 1311 return -EINVAL; 1312 } 1313 1314 if (filename || options_non_empty) { 1315 error_setg(errp, "Cannot reference an existing block device with " 1316 "additional options or a new filename"); 1317 return -EINVAL; 1318 } 1319 1320 bs = bdrv_lookup_bs(reference, reference, errp); 1321 if (!bs) { 1322 return -ENODEV; 1323 } 1324 bdrv_ref(bs); 1325 *pbs = bs; 1326 return 0; 1327 } 1328 1329 if (*pbs) { 1330 bs = *pbs; 1331 } else { 1332 bs = bdrv_new("", &error_abort); 1333 } 1334 1335 /* NULL means an empty set of options */ 1336 if (options == NULL) { 1337 options = qdict_new(); 1338 } 1339 1340 bs->options = options; 1341 options = qdict_clone_shallow(options); 1342 1343 if (flags & BDRV_O_PROTOCOL) { 1344 assert(!drv); 1345 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL, 1346 &local_err); 1347 if (!ret) { 1348 drv = bs->drv; 1349 goto done; 1350 } else if (bs->drv) { 1351 goto close_and_fail; 1352 } else { 1353 goto fail; 1354 } 1355 } 1356 1357 /* Open image file without format layer */ 1358 if (flags & BDRV_O_RDWR) { 1359 flags |= BDRV_O_ALLOW_RDWR; 1360 } 1361 if (flags & BDRV_O_SNAPSHOT) { 1362 snapshot_flags = bdrv_temp_snapshot_flags(flags); 1363 flags = bdrv_backing_flags(flags); 1364 } 1365 1366 assert(file == NULL); 1367 ret = bdrv_open_image(&file, filename, options, "file", 1368 bdrv_inherited_flags(flags), 1369 true, &local_err); 1370 if (ret < 0) { 1371 goto fail; 1372 } 1373 1374 /* Find the right image format driver */ 1375 drvname = qdict_get_try_str(options, "driver"); 1376 if (drvname) { 1377 drv = bdrv_find_format(drvname); 1378 qdict_del(options, "driver"); 1379 if (!drv) { 1380 error_setg(errp, "Invalid driver: '%s'", drvname); 1381 ret = -EINVAL; 1382 goto fail; 1383 } 1384 } 1385 1386 if (!drv) { 1387 if (file) { 1388 ret = find_image_format(file, filename, &drv, &local_err); 1389 } else { 1390 error_setg(errp, "Must specify either driver or file"); 1391 ret = -EINVAL; 1392 goto fail; 1393 } 1394 } 1395 1396 if (!drv) { 1397 goto fail; 1398 } 1399 1400 /* Open the image */ 1401 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err); 1402 if (ret < 0) { 1403 goto fail; 1404 } 1405 1406 if (file && (bs->file != file)) { 1407 bdrv_unref(file); 1408 file = NULL; 1409 } 1410 1411 /* If there is a backing file, use it */ 1412 if ((flags & BDRV_O_NO_BACKING) == 0) { 1413 QDict *backing_options; 1414 1415 qdict_extract_subqdict(options, &backing_options, "backing."); 1416 ret = bdrv_open_backing_file(bs, backing_options, &local_err); 1417 if (ret < 0) { 1418 goto close_and_fail; 1419 } 1420 } 1421 1422 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the 1423 * temporary snapshot afterwards. */ 1424 if (snapshot_flags) { 1425 bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err); 1426 if (local_err) { 1427 error_propagate(errp, local_err); 1428 goto close_and_fail; 1429 } 1430 } 1431 1432 1433 done: 1434 /* Check if any unknown options were used */ 1435 if (options && (qdict_size(options) != 0)) { 1436 const QDictEntry *entry = qdict_first(options); 1437 if (flags & BDRV_O_PROTOCOL) { 1438 error_setg(errp, "Block protocol '%s' doesn't support the option " 1439 "'%s'", drv->format_name, entry->key); 1440 } else { 1441 error_setg(errp, "Block format '%s' used by device '%s' doesn't " 1442 "support the option '%s'", drv->format_name, 1443 bs->device_name, entry->key); 1444 } 1445 1446 ret = -EINVAL; 1447 goto close_and_fail; 1448 } 1449 1450 if (!bdrv_key_required(bs)) { 1451 bdrv_dev_change_media_cb(bs, true); 1452 } else if (!runstate_check(RUN_STATE_PRELAUNCH) 1453 && !runstate_check(RUN_STATE_INMIGRATE) 1454 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */ 1455 error_setg(errp, 1456 "Guest must be stopped for opening of encrypted image"); 1457 ret = -EBUSY; 1458 goto close_and_fail; 1459 } 1460 1461 QDECREF(options); 1462 *pbs = bs; 1463 return 0; 1464 1465 fail: 1466 if (file != NULL) { 1467 bdrv_unref(file); 1468 } 1469 QDECREF(bs->options); 1470 QDECREF(options); 1471 bs->options = NULL; 1472 if (!*pbs) { 1473 /* If *pbs is NULL, a new BDS has been created in this function and 1474 needs to be freed now. Otherwise, it does not need to be closed, 1475 since it has not really been opened yet. */ 1476 bdrv_unref(bs); 1477 } 1478 if (local_err) { 1479 error_propagate(errp, local_err); 1480 } 1481 return ret; 1482 1483 close_and_fail: 1484 /* See fail path, but now the BDS has to be always closed */ 1485 if (*pbs) { 1486 bdrv_close(bs); 1487 } else { 1488 bdrv_unref(bs); 1489 } 1490 QDECREF(options); 1491 if (local_err) { 1492 error_propagate(errp, local_err); 1493 } 1494 return ret; 1495 } 1496 1497 typedef struct BlockReopenQueueEntry { 1498 bool prepared; 1499 BDRVReopenState state; 1500 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry; 1501 } BlockReopenQueueEntry; 1502 1503 /* 1504 * Adds a BlockDriverState to a simple queue for an atomic, transactional 1505 * reopen of multiple devices. 1506 * 1507 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT 1508 * already performed, or alternatively may be NULL a new BlockReopenQueue will 1509 * be created and initialized. This newly created BlockReopenQueue should be 1510 * passed back in for subsequent calls that are intended to be of the same 1511 * atomic 'set'. 1512 * 1513 * bs is the BlockDriverState to add to the reopen queue. 1514 * 1515 * flags contains the open flags for the associated bs 1516 * 1517 * returns a pointer to bs_queue, which is either the newly allocated 1518 * bs_queue, or the existing bs_queue being used. 1519 * 1520 */ 1521 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue, 1522 BlockDriverState *bs, int flags) 1523 { 1524 assert(bs != NULL); 1525 1526 BlockReopenQueueEntry *bs_entry; 1527 if (bs_queue == NULL) { 1528 bs_queue = g_new0(BlockReopenQueue, 1); 1529 QSIMPLEQ_INIT(bs_queue); 1530 } 1531 1532 /* bdrv_open() masks this flag out */ 1533 flags &= ~BDRV_O_PROTOCOL; 1534 1535 if (bs->file) { 1536 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags)); 1537 } 1538 1539 bs_entry = g_new0(BlockReopenQueueEntry, 1); 1540 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry); 1541 1542 bs_entry->state.bs = bs; 1543 bs_entry->state.flags = flags; 1544 1545 return bs_queue; 1546 } 1547 1548 /* 1549 * Reopen multiple BlockDriverStates atomically & transactionally. 1550 * 1551 * The queue passed in (bs_queue) must have been built up previous 1552 * via bdrv_reopen_queue(). 1553 * 1554 * Reopens all BDS specified in the queue, with the appropriate 1555 * flags. All devices are prepared for reopen, and failure of any 1556 * device will cause all device changes to be abandonded, and intermediate 1557 * data cleaned up. 1558 * 1559 * If all devices prepare successfully, then the changes are committed 1560 * to all devices. 1561 * 1562 */ 1563 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp) 1564 { 1565 int ret = -1; 1566 BlockReopenQueueEntry *bs_entry, *next; 1567 Error *local_err = NULL; 1568 1569 assert(bs_queue != NULL); 1570 1571 bdrv_drain_all(); 1572 1573 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) { 1574 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) { 1575 error_propagate(errp, local_err); 1576 goto cleanup; 1577 } 1578 bs_entry->prepared = true; 1579 } 1580 1581 /* If we reach this point, we have success and just need to apply the 1582 * changes 1583 */ 1584 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) { 1585 bdrv_reopen_commit(&bs_entry->state); 1586 } 1587 1588 ret = 0; 1589 1590 cleanup: 1591 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) { 1592 if (ret && bs_entry->prepared) { 1593 bdrv_reopen_abort(&bs_entry->state); 1594 } 1595 g_free(bs_entry); 1596 } 1597 g_free(bs_queue); 1598 return ret; 1599 } 1600 1601 1602 /* Reopen a single BlockDriverState with the specified flags. */ 1603 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp) 1604 { 1605 int ret = -1; 1606 Error *local_err = NULL; 1607 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags); 1608 1609 ret = bdrv_reopen_multiple(queue, &local_err); 1610 if (local_err != NULL) { 1611 error_propagate(errp, local_err); 1612 } 1613 return ret; 1614 } 1615 1616 1617 /* 1618 * Prepares a BlockDriverState for reopen. All changes are staged in the 1619 * 'opaque' field of the BDRVReopenState, which is used and allocated by 1620 * the block driver layer .bdrv_reopen_prepare() 1621 * 1622 * bs is the BlockDriverState to reopen 1623 * flags are the new open flags 1624 * queue is the reopen queue 1625 * 1626 * Returns 0 on success, non-zero on error. On error errp will be set 1627 * as well. 1628 * 1629 * On failure, bdrv_reopen_abort() will be called to clean up any data. 1630 * It is the responsibility of the caller to then call the abort() or 1631 * commit() for any other BDS that have been left in a prepare() state 1632 * 1633 */ 1634 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue, 1635 Error **errp) 1636 { 1637 int ret = -1; 1638 Error *local_err = NULL; 1639 BlockDriver *drv; 1640 1641 assert(reopen_state != NULL); 1642 assert(reopen_state->bs->drv != NULL); 1643 drv = reopen_state->bs->drv; 1644 1645 /* if we are to stay read-only, do not allow permission change 1646 * to r/w */ 1647 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) && 1648 reopen_state->flags & BDRV_O_RDWR) { 1649 error_set(errp, QERR_DEVICE_IS_READ_ONLY, 1650 reopen_state->bs->device_name); 1651 goto error; 1652 } 1653 1654 1655 ret = bdrv_flush(reopen_state->bs); 1656 if (ret) { 1657 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive", 1658 strerror(-ret)); 1659 goto error; 1660 } 1661 1662 if (drv->bdrv_reopen_prepare) { 1663 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err); 1664 if (ret) { 1665 if (local_err != NULL) { 1666 error_propagate(errp, local_err); 1667 } else { 1668 error_setg(errp, "failed while preparing to reopen image '%s'", 1669 reopen_state->bs->filename); 1670 } 1671 goto error; 1672 } 1673 } else { 1674 /* It is currently mandatory to have a bdrv_reopen_prepare() 1675 * handler for each supported drv. */ 1676 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED, 1677 drv->format_name, reopen_state->bs->device_name, 1678 "reopening of file"); 1679 ret = -1; 1680 goto error; 1681 } 1682 1683 ret = 0; 1684 1685 error: 1686 return ret; 1687 } 1688 1689 /* 1690 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and 1691 * makes them final by swapping the staging BlockDriverState contents into 1692 * the active BlockDriverState contents. 1693 */ 1694 void bdrv_reopen_commit(BDRVReopenState *reopen_state) 1695 { 1696 BlockDriver *drv; 1697 1698 assert(reopen_state != NULL); 1699 drv = reopen_state->bs->drv; 1700 assert(drv != NULL); 1701 1702 /* If there are any driver level actions to take */ 1703 if (drv->bdrv_reopen_commit) { 1704 drv->bdrv_reopen_commit(reopen_state); 1705 } 1706 1707 /* set BDS specific flags now */ 1708 reopen_state->bs->open_flags = reopen_state->flags; 1709 reopen_state->bs->enable_write_cache = !!(reopen_state->flags & 1710 BDRV_O_CACHE_WB); 1711 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR); 1712 1713 bdrv_refresh_limits(reopen_state->bs); 1714 } 1715 1716 /* 1717 * Abort the reopen, and delete and free the staged changes in 1718 * reopen_state 1719 */ 1720 void bdrv_reopen_abort(BDRVReopenState *reopen_state) 1721 { 1722 BlockDriver *drv; 1723 1724 assert(reopen_state != NULL); 1725 drv = reopen_state->bs->drv; 1726 assert(drv != NULL); 1727 1728 if (drv->bdrv_reopen_abort) { 1729 drv->bdrv_reopen_abort(reopen_state); 1730 } 1731 } 1732 1733 1734 void bdrv_close(BlockDriverState *bs) 1735 { 1736 if (bs->job) { 1737 block_job_cancel_sync(bs->job); 1738 } 1739 bdrv_drain_all(); /* complete I/O */ 1740 bdrv_flush(bs); 1741 bdrv_drain_all(); /* in case flush left pending I/O */ 1742 notifier_list_notify(&bs->close_notifiers, bs); 1743 1744 if (bs->drv) { 1745 if (bs->backing_hd) { 1746 bdrv_unref(bs->backing_hd); 1747 bs->backing_hd = NULL; 1748 } 1749 bs->drv->bdrv_close(bs); 1750 g_free(bs->opaque); 1751 bs->opaque = NULL; 1752 bs->drv = NULL; 1753 bs->copy_on_read = 0; 1754 bs->backing_file[0] = '\0'; 1755 bs->backing_format[0] = '\0'; 1756 bs->total_sectors = 0; 1757 bs->encrypted = 0; 1758 bs->valid_key = 0; 1759 bs->sg = 0; 1760 bs->growable = 0; 1761 bs->zero_beyond_eof = false; 1762 QDECREF(bs->options); 1763 bs->options = NULL; 1764 1765 if (bs->file != NULL) { 1766 bdrv_unref(bs->file); 1767 bs->file = NULL; 1768 } 1769 } 1770 1771 bdrv_dev_change_media_cb(bs, false); 1772 1773 /*throttling disk I/O limits*/ 1774 if (bs->io_limits_enabled) { 1775 bdrv_io_limits_disable(bs); 1776 } 1777 } 1778 1779 void bdrv_close_all(void) 1780 { 1781 BlockDriverState *bs; 1782 1783 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 1784 bdrv_close(bs); 1785 } 1786 } 1787 1788 /* Check if any requests are in-flight (including throttled requests) */ 1789 static bool bdrv_requests_pending(BlockDriverState *bs) 1790 { 1791 if (!QLIST_EMPTY(&bs->tracked_requests)) { 1792 return true; 1793 } 1794 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) { 1795 return true; 1796 } 1797 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) { 1798 return true; 1799 } 1800 if (bs->file && bdrv_requests_pending(bs->file)) { 1801 return true; 1802 } 1803 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) { 1804 return true; 1805 } 1806 return false; 1807 } 1808 1809 static bool bdrv_requests_pending_all(void) 1810 { 1811 BlockDriverState *bs; 1812 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 1813 if (bdrv_requests_pending(bs)) { 1814 return true; 1815 } 1816 } 1817 return false; 1818 } 1819 1820 /* 1821 * Wait for pending requests to complete across all BlockDriverStates 1822 * 1823 * This function does not flush data to disk, use bdrv_flush_all() for that 1824 * after calling this function. 1825 * 1826 * Note that completion of an asynchronous I/O operation can trigger any 1827 * number of other I/O operations on other devices---for example a coroutine 1828 * can be arbitrarily complex and a constant flow of I/O can come until the 1829 * coroutine is complete. Because of this, it is not possible to have a 1830 * function to drain a single device's I/O queue. 1831 */ 1832 void bdrv_drain_all(void) 1833 { 1834 /* Always run first iteration so any pending completion BHs run */ 1835 bool busy = true; 1836 BlockDriverState *bs; 1837 1838 while (busy) { 1839 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 1840 bdrv_start_throttled_reqs(bs); 1841 } 1842 1843 busy = bdrv_requests_pending_all(); 1844 busy |= aio_poll(qemu_get_aio_context(), busy); 1845 } 1846 } 1847 1848 /* make a BlockDriverState anonymous by removing from bdrv_state and 1849 * graph_bdrv_state list. 1850 Also, NULL terminate the device_name to prevent double remove */ 1851 void bdrv_make_anon(BlockDriverState *bs) 1852 { 1853 if (bs->device_name[0] != '\0') { 1854 QTAILQ_REMOVE(&bdrv_states, bs, device_list); 1855 } 1856 bs->device_name[0] = '\0'; 1857 if (bs->node_name[0] != '\0') { 1858 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list); 1859 } 1860 bs->node_name[0] = '\0'; 1861 } 1862 1863 static void bdrv_rebind(BlockDriverState *bs) 1864 { 1865 if (bs->drv && bs->drv->bdrv_rebind) { 1866 bs->drv->bdrv_rebind(bs); 1867 } 1868 } 1869 1870 static void bdrv_move_feature_fields(BlockDriverState *bs_dest, 1871 BlockDriverState *bs_src) 1872 { 1873 /* move some fields that need to stay attached to the device */ 1874 1875 /* dev info */ 1876 bs_dest->dev_ops = bs_src->dev_ops; 1877 bs_dest->dev_opaque = bs_src->dev_opaque; 1878 bs_dest->dev = bs_src->dev; 1879 bs_dest->guest_block_size = bs_src->guest_block_size; 1880 bs_dest->copy_on_read = bs_src->copy_on_read; 1881 1882 bs_dest->enable_write_cache = bs_src->enable_write_cache; 1883 1884 /* i/o throttled req */ 1885 memcpy(&bs_dest->throttle_state, 1886 &bs_src->throttle_state, 1887 sizeof(ThrottleState)); 1888 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0]; 1889 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1]; 1890 bs_dest->io_limits_enabled = bs_src->io_limits_enabled; 1891 1892 /* r/w error */ 1893 bs_dest->on_read_error = bs_src->on_read_error; 1894 bs_dest->on_write_error = bs_src->on_write_error; 1895 1896 /* i/o status */ 1897 bs_dest->iostatus_enabled = bs_src->iostatus_enabled; 1898 bs_dest->iostatus = bs_src->iostatus; 1899 1900 /* dirty bitmap */ 1901 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps; 1902 1903 /* reference count */ 1904 bs_dest->refcnt = bs_src->refcnt; 1905 1906 /* job */ 1907 bs_dest->in_use = bs_src->in_use; 1908 bs_dest->job = bs_src->job; 1909 1910 /* keep the same entry in bdrv_states */ 1911 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name), 1912 bs_src->device_name); 1913 bs_dest->device_list = bs_src->device_list; 1914 } 1915 1916 /* 1917 * Swap bs contents for two image chains while they are live, 1918 * while keeping required fields on the BlockDriverState that is 1919 * actually attached to a device. 1920 * 1921 * This will modify the BlockDriverState fields, and swap contents 1922 * between bs_new and bs_old. Both bs_new and bs_old are modified. 1923 * 1924 * bs_new is required to be anonymous. 1925 * 1926 * This function does not create any image files. 1927 */ 1928 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old) 1929 { 1930 BlockDriverState tmp; 1931 1932 /* The code needs to swap the node_name but simply swapping node_list won't 1933 * work so first remove the nodes from the graph list, do the swap then 1934 * insert them back if needed. 1935 */ 1936 if (bs_new->node_name[0] != '\0') { 1937 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list); 1938 } 1939 if (bs_old->node_name[0] != '\0') { 1940 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list); 1941 } 1942 1943 /* bs_new must be anonymous and shouldn't have anything fancy enabled */ 1944 assert(bs_new->device_name[0] == '\0'); 1945 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps)); 1946 assert(bs_new->job == NULL); 1947 assert(bs_new->dev == NULL); 1948 assert(bs_new->in_use == 0); 1949 assert(bs_new->io_limits_enabled == false); 1950 assert(!throttle_have_timer(&bs_new->throttle_state)); 1951 1952 tmp = *bs_new; 1953 *bs_new = *bs_old; 1954 *bs_old = tmp; 1955 1956 /* there are some fields that should not be swapped, move them back */ 1957 bdrv_move_feature_fields(&tmp, bs_old); 1958 bdrv_move_feature_fields(bs_old, bs_new); 1959 bdrv_move_feature_fields(bs_new, &tmp); 1960 1961 /* bs_new shouldn't be in bdrv_states even after the swap! */ 1962 assert(bs_new->device_name[0] == '\0'); 1963 1964 /* Check a few fields that should remain attached to the device */ 1965 assert(bs_new->dev == NULL); 1966 assert(bs_new->job == NULL); 1967 assert(bs_new->in_use == 0); 1968 assert(bs_new->io_limits_enabled == false); 1969 assert(!throttle_have_timer(&bs_new->throttle_state)); 1970 1971 /* insert the nodes back into the graph node list if needed */ 1972 if (bs_new->node_name[0] != '\0') { 1973 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list); 1974 } 1975 if (bs_old->node_name[0] != '\0') { 1976 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list); 1977 } 1978 1979 bdrv_rebind(bs_new); 1980 bdrv_rebind(bs_old); 1981 } 1982 1983 /* 1984 * Add new bs contents at the top of an image chain while the chain is 1985 * live, while keeping required fields on the top layer. 1986 * 1987 * This will modify the BlockDriverState fields, and swap contents 1988 * between bs_new and bs_top. Both bs_new and bs_top are modified. 1989 * 1990 * bs_new is required to be anonymous. 1991 * 1992 * This function does not create any image files. 1993 */ 1994 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top) 1995 { 1996 bdrv_swap(bs_new, bs_top); 1997 1998 /* The contents of 'tmp' will become bs_top, as we are 1999 * swapping bs_new and bs_top contents. */ 2000 bs_top->backing_hd = bs_new; 2001 bs_top->open_flags &= ~BDRV_O_NO_BACKING; 2002 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file), 2003 bs_new->filename); 2004 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format), 2005 bs_new->drv ? bs_new->drv->format_name : ""); 2006 } 2007 2008 static void bdrv_delete(BlockDriverState *bs) 2009 { 2010 assert(!bs->dev); 2011 assert(!bs->job); 2012 assert(!bs->in_use); 2013 assert(!bs->refcnt); 2014 assert(QLIST_EMPTY(&bs->dirty_bitmaps)); 2015 2016 bdrv_close(bs); 2017 2018 /* remove from list, if necessary */ 2019 bdrv_make_anon(bs); 2020 2021 g_free(bs); 2022 } 2023 2024 int bdrv_attach_dev(BlockDriverState *bs, void *dev) 2025 /* TODO change to DeviceState *dev when all users are qdevified */ 2026 { 2027 if (bs->dev) { 2028 return -EBUSY; 2029 } 2030 bs->dev = dev; 2031 bdrv_iostatus_reset(bs); 2032 return 0; 2033 } 2034 2035 /* TODO qdevified devices don't use this, remove when devices are qdevified */ 2036 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev) 2037 { 2038 if (bdrv_attach_dev(bs, dev) < 0) { 2039 abort(); 2040 } 2041 } 2042 2043 void bdrv_detach_dev(BlockDriverState *bs, void *dev) 2044 /* TODO change to DeviceState *dev when all users are qdevified */ 2045 { 2046 assert(bs->dev == dev); 2047 bs->dev = NULL; 2048 bs->dev_ops = NULL; 2049 bs->dev_opaque = NULL; 2050 bs->guest_block_size = 512; 2051 } 2052 2053 /* TODO change to return DeviceState * when all users are qdevified */ 2054 void *bdrv_get_attached_dev(BlockDriverState *bs) 2055 { 2056 return bs->dev; 2057 } 2058 2059 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops, 2060 void *opaque) 2061 { 2062 bs->dev_ops = ops; 2063 bs->dev_opaque = opaque; 2064 } 2065 2066 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv, 2067 enum MonitorEvent ev, 2068 BlockErrorAction action, bool is_read) 2069 { 2070 QObject *data; 2071 const char *action_str; 2072 2073 switch (action) { 2074 case BDRV_ACTION_REPORT: 2075 action_str = "report"; 2076 break; 2077 case BDRV_ACTION_IGNORE: 2078 action_str = "ignore"; 2079 break; 2080 case BDRV_ACTION_STOP: 2081 action_str = "stop"; 2082 break; 2083 default: 2084 abort(); 2085 } 2086 2087 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }", 2088 bdrv->device_name, 2089 action_str, 2090 is_read ? "read" : "write"); 2091 monitor_protocol_event(ev, data); 2092 2093 qobject_decref(data); 2094 } 2095 2096 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected) 2097 { 2098 QObject *data; 2099 2100 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }", 2101 bdrv_get_device_name(bs), ejected); 2102 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data); 2103 2104 qobject_decref(data); 2105 } 2106 2107 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load) 2108 { 2109 if (bs->dev_ops && bs->dev_ops->change_media_cb) { 2110 bool tray_was_closed = !bdrv_dev_is_tray_open(bs); 2111 bs->dev_ops->change_media_cb(bs->dev_opaque, load); 2112 if (tray_was_closed) { 2113 /* tray open */ 2114 bdrv_emit_qmp_eject_event(bs, true); 2115 } 2116 if (load) { 2117 /* tray close */ 2118 bdrv_emit_qmp_eject_event(bs, false); 2119 } 2120 } 2121 } 2122 2123 bool bdrv_dev_has_removable_media(BlockDriverState *bs) 2124 { 2125 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb); 2126 } 2127 2128 void bdrv_dev_eject_request(BlockDriverState *bs, bool force) 2129 { 2130 if (bs->dev_ops && bs->dev_ops->eject_request_cb) { 2131 bs->dev_ops->eject_request_cb(bs->dev_opaque, force); 2132 } 2133 } 2134 2135 bool bdrv_dev_is_tray_open(BlockDriverState *bs) 2136 { 2137 if (bs->dev_ops && bs->dev_ops->is_tray_open) { 2138 return bs->dev_ops->is_tray_open(bs->dev_opaque); 2139 } 2140 return false; 2141 } 2142 2143 static void bdrv_dev_resize_cb(BlockDriverState *bs) 2144 { 2145 if (bs->dev_ops && bs->dev_ops->resize_cb) { 2146 bs->dev_ops->resize_cb(bs->dev_opaque); 2147 } 2148 } 2149 2150 bool bdrv_dev_is_medium_locked(BlockDriverState *bs) 2151 { 2152 if (bs->dev_ops && bs->dev_ops->is_medium_locked) { 2153 return bs->dev_ops->is_medium_locked(bs->dev_opaque); 2154 } 2155 return false; 2156 } 2157 2158 /* 2159 * Run consistency checks on an image 2160 * 2161 * Returns 0 if the check could be completed (it doesn't mean that the image is 2162 * free of errors) or -errno when an internal error occurred. The results of the 2163 * check are stored in res. 2164 */ 2165 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix) 2166 { 2167 if (bs->drv->bdrv_check == NULL) { 2168 return -ENOTSUP; 2169 } 2170 2171 memset(res, 0, sizeof(*res)); 2172 return bs->drv->bdrv_check(bs, res, fix); 2173 } 2174 2175 #define COMMIT_BUF_SECTORS 2048 2176 2177 /* commit COW file into the raw image */ 2178 int bdrv_commit(BlockDriverState *bs) 2179 { 2180 BlockDriver *drv = bs->drv; 2181 int64_t sector, total_sectors, length, backing_length; 2182 int n, ro, open_flags; 2183 int ret = 0; 2184 uint8_t *buf = NULL; 2185 char filename[PATH_MAX]; 2186 2187 if (!drv) 2188 return -ENOMEDIUM; 2189 2190 if (!bs->backing_hd) { 2191 return -ENOTSUP; 2192 } 2193 2194 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) { 2195 return -EBUSY; 2196 } 2197 2198 ro = bs->backing_hd->read_only; 2199 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */ 2200 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename); 2201 open_flags = bs->backing_hd->open_flags; 2202 2203 if (ro) { 2204 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) { 2205 return -EACCES; 2206 } 2207 } 2208 2209 length = bdrv_getlength(bs); 2210 if (length < 0) { 2211 ret = length; 2212 goto ro_cleanup; 2213 } 2214 2215 backing_length = bdrv_getlength(bs->backing_hd); 2216 if (backing_length < 0) { 2217 ret = backing_length; 2218 goto ro_cleanup; 2219 } 2220 2221 /* If our top snapshot is larger than the backing file image, 2222 * grow the backing file image if possible. If not possible, 2223 * we must return an error */ 2224 if (length > backing_length) { 2225 ret = bdrv_truncate(bs->backing_hd, length); 2226 if (ret < 0) { 2227 goto ro_cleanup; 2228 } 2229 } 2230 2231 total_sectors = length >> BDRV_SECTOR_BITS; 2232 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE); 2233 2234 for (sector = 0; sector < total_sectors; sector += n) { 2235 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n); 2236 if (ret < 0) { 2237 goto ro_cleanup; 2238 } 2239 if (ret) { 2240 ret = bdrv_read(bs, sector, buf, n); 2241 if (ret < 0) { 2242 goto ro_cleanup; 2243 } 2244 2245 ret = bdrv_write(bs->backing_hd, sector, buf, n); 2246 if (ret < 0) { 2247 goto ro_cleanup; 2248 } 2249 } 2250 } 2251 2252 if (drv->bdrv_make_empty) { 2253 ret = drv->bdrv_make_empty(bs); 2254 if (ret < 0) { 2255 goto ro_cleanup; 2256 } 2257 bdrv_flush(bs); 2258 } 2259 2260 /* 2261 * Make sure all data we wrote to the backing device is actually 2262 * stable on disk. 2263 */ 2264 if (bs->backing_hd) { 2265 bdrv_flush(bs->backing_hd); 2266 } 2267 2268 ret = 0; 2269 ro_cleanup: 2270 g_free(buf); 2271 2272 if (ro) { 2273 /* ignoring error return here */ 2274 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL); 2275 } 2276 2277 return ret; 2278 } 2279 2280 int bdrv_commit_all(void) 2281 { 2282 BlockDriverState *bs; 2283 2284 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 2285 if (bs->drv && bs->backing_hd) { 2286 int ret = bdrv_commit(bs); 2287 if (ret < 0) { 2288 return ret; 2289 } 2290 } 2291 } 2292 return 0; 2293 } 2294 2295 /** 2296 * Remove an active request from the tracked requests list 2297 * 2298 * This function should be called when a tracked request is completing. 2299 */ 2300 static void tracked_request_end(BdrvTrackedRequest *req) 2301 { 2302 if (req->serialising) { 2303 req->bs->serialising_in_flight--; 2304 } 2305 2306 QLIST_REMOVE(req, list); 2307 qemu_co_queue_restart_all(&req->wait_queue); 2308 } 2309 2310 /** 2311 * Add an active request to the tracked requests list 2312 */ 2313 static void tracked_request_begin(BdrvTrackedRequest *req, 2314 BlockDriverState *bs, 2315 int64_t offset, 2316 unsigned int bytes, bool is_write) 2317 { 2318 *req = (BdrvTrackedRequest){ 2319 .bs = bs, 2320 .offset = offset, 2321 .bytes = bytes, 2322 .is_write = is_write, 2323 .co = qemu_coroutine_self(), 2324 .serialising = false, 2325 .overlap_offset = offset, 2326 .overlap_bytes = bytes, 2327 }; 2328 2329 qemu_co_queue_init(&req->wait_queue); 2330 2331 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list); 2332 } 2333 2334 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align) 2335 { 2336 int64_t overlap_offset = req->offset & ~(align - 1); 2337 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align) 2338 - overlap_offset; 2339 2340 if (!req->serialising) { 2341 req->bs->serialising_in_flight++; 2342 req->serialising = true; 2343 } 2344 2345 req->overlap_offset = MIN(req->overlap_offset, overlap_offset); 2346 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes); 2347 } 2348 2349 /** 2350 * Round a region to cluster boundaries 2351 */ 2352 void bdrv_round_to_clusters(BlockDriverState *bs, 2353 int64_t sector_num, int nb_sectors, 2354 int64_t *cluster_sector_num, 2355 int *cluster_nb_sectors) 2356 { 2357 BlockDriverInfo bdi; 2358 2359 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) { 2360 *cluster_sector_num = sector_num; 2361 *cluster_nb_sectors = nb_sectors; 2362 } else { 2363 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE; 2364 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c); 2365 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num + 2366 nb_sectors, c); 2367 } 2368 } 2369 2370 static int bdrv_get_cluster_size(BlockDriverState *bs) 2371 { 2372 BlockDriverInfo bdi; 2373 int ret; 2374 2375 ret = bdrv_get_info(bs, &bdi); 2376 if (ret < 0 || bdi.cluster_size == 0) { 2377 return bs->request_alignment; 2378 } else { 2379 return bdi.cluster_size; 2380 } 2381 } 2382 2383 static bool tracked_request_overlaps(BdrvTrackedRequest *req, 2384 int64_t offset, unsigned int bytes) 2385 { 2386 /* aaaa bbbb */ 2387 if (offset >= req->overlap_offset + req->overlap_bytes) { 2388 return false; 2389 } 2390 /* bbbb aaaa */ 2391 if (req->overlap_offset >= offset + bytes) { 2392 return false; 2393 } 2394 return true; 2395 } 2396 2397 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self) 2398 { 2399 BlockDriverState *bs = self->bs; 2400 BdrvTrackedRequest *req; 2401 bool retry; 2402 bool waited = false; 2403 2404 if (!bs->serialising_in_flight) { 2405 return false; 2406 } 2407 2408 do { 2409 retry = false; 2410 QLIST_FOREACH(req, &bs->tracked_requests, list) { 2411 if (req == self || (!req->serialising && !self->serialising)) { 2412 continue; 2413 } 2414 if (tracked_request_overlaps(req, self->overlap_offset, 2415 self->overlap_bytes)) 2416 { 2417 /* Hitting this means there was a reentrant request, for 2418 * example, a block driver issuing nested requests. This must 2419 * never happen since it means deadlock. 2420 */ 2421 assert(qemu_coroutine_self() != req->co); 2422 2423 /* If the request is already (indirectly) waiting for us, or 2424 * will wait for us as soon as it wakes up, then just go on 2425 * (instead of producing a deadlock in the former case). */ 2426 if (!req->waiting_for) { 2427 self->waiting_for = req; 2428 qemu_co_queue_wait(&req->wait_queue); 2429 self->waiting_for = NULL; 2430 retry = true; 2431 waited = true; 2432 break; 2433 } 2434 } 2435 } 2436 } while (retry); 2437 2438 return waited; 2439 } 2440 2441 /* 2442 * Return values: 2443 * 0 - success 2444 * -EINVAL - backing format specified, but no file 2445 * -ENOSPC - can't update the backing file because no space is left in the 2446 * image file header 2447 * -ENOTSUP - format driver doesn't support changing the backing file 2448 */ 2449 int bdrv_change_backing_file(BlockDriverState *bs, 2450 const char *backing_file, const char *backing_fmt) 2451 { 2452 BlockDriver *drv = bs->drv; 2453 int ret; 2454 2455 /* Backing file format doesn't make sense without a backing file */ 2456 if (backing_fmt && !backing_file) { 2457 return -EINVAL; 2458 } 2459 2460 if (drv->bdrv_change_backing_file != NULL) { 2461 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt); 2462 } else { 2463 ret = -ENOTSUP; 2464 } 2465 2466 if (ret == 0) { 2467 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: ""); 2468 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: ""); 2469 } 2470 return ret; 2471 } 2472 2473 /* 2474 * Finds the image layer in the chain that has 'bs' as its backing file. 2475 * 2476 * active is the current topmost image. 2477 * 2478 * Returns NULL if bs is not found in active's image chain, 2479 * or if active == bs. 2480 */ 2481 BlockDriverState *bdrv_find_overlay(BlockDriverState *active, 2482 BlockDriverState *bs) 2483 { 2484 BlockDriverState *overlay = NULL; 2485 BlockDriverState *intermediate; 2486 2487 assert(active != NULL); 2488 assert(bs != NULL); 2489 2490 /* if bs is the same as active, then by definition it has no overlay 2491 */ 2492 if (active == bs) { 2493 return NULL; 2494 } 2495 2496 intermediate = active; 2497 while (intermediate->backing_hd) { 2498 if (intermediate->backing_hd == bs) { 2499 overlay = intermediate; 2500 break; 2501 } 2502 intermediate = intermediate->backing_hd; 2503 } 2504 2505 return overlay; 2506 } 2507 2508 typedef struct BlkIntermediateStates { 2509 BlockDriverState *bs; 2510 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry; 2511 } BlkIntermediateStates; 2512 2513 2514 /* 2515 * Drops images above 'base' up to and including 'top', and sets the image 2516 * above 'top' to have base as its backing file. 2517 * 2518 * Requires that the overlay to 'top' is opened r/w, so that the backing file 2519 * information in 'bs' can be properly updated. 2520 * 2521 * E.g., this will convert the following chain: 2522 * bottom <- base <- intermediate <- top <- active 2523 * 2524 * to 2525 * 2526 * bottom <- base <- active 2527 * 2528 * It is allowed for bottom==base, in which case it converts: 2529 * 2530 * base <- intermediate <- top <- active 2531 * 2532 * to 2533 * 2534 * base <- active 2535 * 2536 * Error conditions: 2537 * if active == top, that is considered an error 2538 * 2539 */ 2540 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top, 2541 BlockDriverState *base) 2542 { 2543 BlockDriverState *intermediate; 2544 BlockDriverState *base_bs = NULL; 2545 BlockDriverState *new_top_bs = NULL; 2546 BlkIntermediateStates *intermediate_state, *next; 2547 int ret = -EIO; 2548 2549 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete; 2550 QSIMPLEQ_INIT(&states_to_delete); 2551 2552 if (!top->drv || !base->drv) { 2553 goto exit; 2554 } 2555 2556 new_top_bs = bdrv_find_overlay(active, top); 2557 2558 if (new_top_bs == NULL) { 2559 /* we could not find the image above 'top', this is an error */ 2560 goto exit; 2561 } 2562 2563 /* special case of new_top_bs->backing_hd already pointing to base - nothing 2564 * to do, no intermediate images */ 2565 if (new_top_bs->backing_hd == base) { 2566 ret = 0; 2567 goto exit; 2568 } 2569 2570 intermediate = top; 2571 2572 /* now we will go down through the list, and add each BDS we find 2573 * into our deletion queue, until we hit the 'base' 2574 */ 2575 while (intermediate) { 2576 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates)); 2577 intermediate_state->bs = intermediate; 2578 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry); 2579 2580 if (intermediate->backing_hd == base) { 2581 base_bs = intermediate->backing_hd; 2582 break; 2583 } 2584 intermediate = intermediate->backing_hd; 2585 } 2586 if (base_bs == NULL) { 2587 /* something went wrong, we did not end at the base. safely 2588 * unravel everything, and exit with error */ 2589 goto exit; 2590 } 2591 2592 /* success - we can delete the intermediate states, and link top->base */ 2593 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename, 2594 base_bs->drv ? base_bs->drv->format_name : ""); 2595 if (ret) { 2596 goto exit; 2597 } 2598 new_top_bs->backing_hd = base_bs; 2599 2600 bdrv_refresh_limits(new_top_bs); 2601 2602 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) { 2603 /* so that bdrv_close() does not recursively close the chain */ 2604 intermediate_state->bs->backing_hd = NULL; 2605 bdrv_unref(intermediate_state->bs); 2606 } 2607 ret = 0; 2608 2609 exit: 2610 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) { 2611 g_free(intermediate_state); 2612 } 2613 return ret; 2614 } 2615 2616 2617 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset, 2618 size_t size) 2619 { 2620 int64_t len; 2621 2622 if (size > INT_MAX) { 2623 return -EIO; 2624 } 2625 2626 if (!bdrv_is_inserted(bs)) 2627 return -ENOMEDIUM; 2628 2629 if (bs->growable) 2630 return 0; 2631 2632 len = bdrv_getlength(bs); 2633 2634 if (offset < 0) 2635 return -EIO; 2636 2637 if ((offset > len) || (len - offset < size)) 2638 return -EIO; 2639 2640 return 0; 2641 } 2642 2643 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num, 2644 int nb_sectors) 2645 { 2646 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) { 2647 return -EIO; 2648 } 2649 2650 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE, 2651 nb_sectors * BDRV_SECTOR_SIZE); 2652 } 2653 2654 typedef struct RwCo { 2655 BlockDriverState *bs; 2656 int64_t offset; 2657 QEMUIOVector *qiov; 2658 bool is_write; 2659 int ret; 2660 BdrvRequestFlags flags; 2661 } RwCo; 2662 2663 static void coroutine_fn bdrv_rw_co_entry(void *opaque) 2664 { 2665 RwCo *rwco = opaque; 2666 2667 if (!rwco->is_write) { 2668 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset, 2669 rwco->qiov->size, rwco->qiov, 2670 rwco->flags); 2671 } else { 2672 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset, 2673 rwco->qiov->size, rwco->qiov, 2674 rwco->flags); 2675 } 2676 } 2677 2678 /* 2679 * Process a vectored synchronous request using coroutines 2680 */ 2681 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset, 2682 QEMUIOVector *qiov, bool is_write, 2683 BdrvRequestFlags flags) 2684 { 2685 Coroutine *co; 2686 RwCo rwco = { 2687 .bs = bs, 2688 .offset = offset, 2689 .qiov = qiov, 2690 .is_write = is_write, 2691 .ret = NOT_DONE, 2692 .flags = flags, 2693 }; 2694 2695 /** 2696 * In sync call context, when the vcpu is blocked, this throttling timer 2697 * will not fire; so the I/O throttling function has to be disabled here 2698 * if it has been enabled. 2699 */ 2700 if (bs->io_limits_enabled) { 2701 fprintf(stderr, "Disabling I/O throttling on '%s' due " 2702 "to synchronous I/O.\n", bdrv_get_device_name(bs)); 2703 bdrv_io_limits_disable(bs); 2704 } 2705 2706 if (qemu_in_coroutine()) { 2707 /* Fast-path if already in coroutine context */ 2708 bdrv_rw_co_entry(&rwco); 2709 } else { 2710 co = qemu_coroutine_create(bdrv_rw_co_entry); 2711 qemu_coroutine_enter(co, &rwco); 2712 while (rwco.ret == NOT_DONE) { 2713 qemu_aio_wait(); 2714 } 2715 } 2716 return rwco.ret; 2717 } 2718 2719 /* 2720 * Process a synchronous request using coroutines 2721 */ 2722 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf, 2723 int nb_sectors, bool is_write, BdrvRequestFlags flags) 2724 { 2725 QEMUIOVector qiov; 2726 struct iovec iov = { 2727 .iov_base = (void *)buf, 2728 .iov_len = nb_sectors * BDRV_SECTOR_SIZE, 2729 }; 2730 2731 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) { 2732 return -EINVAL; 2733 } 2734 2735 qemu_iovec_init_external(&qiov, &iov, 1); 2736 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS, 2737 &qiov, is_write, flags); 2738 } 2739 2740 /* return < 0 if error. See bdrv_write() for the return codes */ 2741 int bdrv_read(BlockDriverState *bs, int64_t sector_num, 2742 uint8_t *buf, int nb_sectors) 2743 { 2744 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0); 2745 } 2746 2747 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */ 2748 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num, 2749 uint8_t *buf, int nb_sectors) 2750 { 2751 bool enabled; 2752 int ret; 2753 2754 enabled = bs->io_limits_enabled; 2755 bs->io_limits_enabled = false; 2756 ret = bdrv_read(bs, sector_num, buf, nb_sectors); 2757 bs->io_limits_enabled = enabled; 2758 return ret; 2759 } 2760 2761 /* Return < 0 if error. Important errors are: 2762 -EIO generic I/O error (may happen for all errors) 2763 -ENOMEDIUM No media inserted. 2764 -EINVAL Invalid sector number or nb_sectors 2765 -EACCES Trying to write a read-only device 2766 */ 2767 int bdrv_write(BlockDriverState *bs, int64_t sector_num, 2768 const uint8_t *buf, int nb_sectors) 2769 { 2770 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0); 2771 } 2772 2773 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, 2774 int nb_sectors, BdrvRequestFlags flags) 2775 { 2776 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true, 2777 BDRV_REQ_ZERO_WRITE | flags); 2778 } 2779 2780 /* 2781 * Completely zero out a block device with the help of bdrv_write_zeroes. 2782 * The operation is sped up by checking the block status and only writing 2783 * zeroes to the device if they currently do not return zeroes. Optional 2784 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP). 2785 * 2786 * Returns < 0 on error, 0 on success. For error codes see bdrv_write(). 2787 */ 2788 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags) 2789 { 2790 int64_t target_size; 2791 int64_t ret, nb_sectors, sector_num = 0; 2792 int n; 2793 2794 target_size = bdrv_getlength(bs); 2795 if (target_size < 0) { 2796 return target_size; 2797 } 2798 target_size /= BDRV_SECTOR_SIZE; 2799 2800 for (;;) { 2801 nb_sectors = target_size - sector_num; 2802 if (nb_sectors <= 0) { 2803 return 0; 2804 } 2805 if (nb_sectors > INT_MAX) { 2806 nb_sectors = INT_MAX; 2807 } 2808 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n); 2809 if (ret < 0) { 2810 error_report("error getting block status at sector %" PRId64 ": %s", 2811 sector_num, strerror(-ret)); 2812 return ret; 2813 } 2814 if (ret & BDRV_BLOCK_ZERO) { 2815 sector_num += n; 2816 continue; 2817 } 2818 ret = bdrv_write_zeroes(bs, sector_num, n, flags); 2819 if (ret < 0) { 2820 error_report("error writing zeroes at sector %" PRId64 ": %s", 2821 sector_num, strerror(-ret)); 2822 return ret; 2823 } 2824 sector_num += n; 2825 } 2826 } 2827 2828 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes) 2829 { 2830 QEMUIOVector qiov; 2831 struct iovec iov = { 2832 .iov_base = (void *)buf, 2833 .iov_len = bytes, 2834 }; 2835 int ret; 2836 2837 if (bytes < 0) { 2838 return -EINVAL; 2839 } 2840 2841 qemu_iovec_init_external(&qiov, &iov, 1); 2842 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0); 2843 if (ret < 0) { 2844 return ret; 2845 } 2846 2847 return bytes; 2848 } 2849 2850 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov) 2851 { 2852 int ret; 2853 2854 ret = bdrv_prwv_co(bs, offset, qiov, true, 0); 2855 if (ret < 0) { 2856 return ret; 2857 } 2858 2859 return qiov->size; 2860 } 2861 2862 int bdrv_pwrite(BlockDriverState *bs, int64_t offset, 2863 const void *buf, int bytes) 2864 { 2865 QEMUIOVector qiov; 2866 struct iovec iov = { 2867 .iov_base = (void *) buf, 2868 .iov_len = bytes, 2869 }; 2870 2871 if (bytes < 0) { 2872 return -EINVAL; 2873 } 2874 2875 qemu_iovec_init_external(&qiov, &iov, 1); 2876 return bdrv_pwritev(bs, offset, &qiov); 2877 } 2878 2879 /* 2880 * Writes to the file and ensures that no writes are reordered across this 2881 * request (acts as a barrier) 2882 * 2883 * Returns 0 on success, -errno in error cases. 2884 */ 2885 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset, 2886 const void *buf, int count) 2887 { 2888 int ret; 2889 2890 ret = bdrv_pwrite(bs, offset, buf, count); 2891 if (ret < 0) { 2892 return ret; 2893 } 2894 2895 /* No flush needed for cache modes that already do it */ 2896 if (bs->enable_write_cache) { 2897 bdrv_flush(bs); 2898 } 2899 2900 return 0; 2901 } 2902 2903 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs, 2904 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) 2905 { 2906 /* Perform I/O through a temporary buffer so that users who scribble over 2907 * their read buffer while the operation is in progress do not end up 2908 * modifying the image file. This is critical for zero-copy guest I/O 2909 * where anything might happen inside guest memory. 2910 */ 2911 void *bounce_buffer; 2912 2913 BlockDriver *drv = bs->drv; 2914 struct iovec iov; 2915 QEMUIOVector bounce_qiov; 2916 int64_t cluster_sector_num; 2917 int cluster_nb_sectors; 2918 size_t skip_bytes; 2919 int ret; 2920 2921 /* Cover entire cluster so no additional backing file I/O is required when 2922 * allocating cluster in the image file. 2923 */ 2924 bdrv_round_to_clusters(bs, sector_num, nb_sectors, 2925 &cluster_sector_num, &cluster_nb_sectors); 2926 2927 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, 2928 cluster_sector_num, cluster_nb_sectors); 2929 2930 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE; 2931 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len); 2932 qemu_iovec_init_external(&bounce_qiov, &iov, 1); 2933 2934 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors, 2935 &bounce_qiov); 2936 if (ret < 0) { 2937 goto err; 2938 } 2939 2940 if (drv->bdrv_co_write_zeroes && 2941 buffer_is_zero(bounce_buffer, iov.iov_len)) { 2942 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num, 2943 cluster_nb_sectors, 0); 2944 } else { 2945 /* This does not change the data on the disk, it is not necessary 2946 * to flush even in cache=writethrough mode. 2947 */ 2948 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors, 2949 &bounce_qiov); 2950 } 2951 2952 if (ret < 0) { 2953 /* It might be okay to ignore write errors for guest requests. If this 2954 * is a deliberate copy-on-read then we don't want to ignore the error. 2955 * Simply report it in all cases. 2956 */ 2957 goto err; 2958 } 2959 2960 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE; 2961 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes, 2962 nb_sectors * BDRV_SECTOR_SIZE); 2963 2964 err: 2965 qemu_vfree(bounce_buffer); 2966 return ret; 2967 } 2968 2969 /* 2970 * Forwards an already correctly aligned request to the BlockDriver. This 2971 * handles copy on read and zeroing after EOF; any other features must be 2972 * implemented by the caller. 2973 */ 2974 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs, 2975 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, 2976 int64_t align, QEMUIOVector *qiov, int flags) 2977 { 2978 BlockDriver *drv = bs->drv; 2979 int ret; 2980 2981 int64_t sector_num = offset >> BDRV_SECTOR_BITS; 2982 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; 2983 2984 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); 2985 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); 2986 2987 /* Handle Copy on Read and associated serialisation */ 2988 if (flags & BDRV_REQ_COPY_ON_READ) { 2989 /* If we touch the same cluster it counts as an overlap. This 2990 * guarantees that allocating writes will be serialized and not race 2991 * with each other for the same cluster. For example, in copy-on-read 2992 * it ensures that the CoR read and write operations are atomic and 2993 * guest writes cannot interleave between them. */ 2994 mark_request_serialising(req, bdrv_get_cluster_size(bs)); 2995 } 2996 2997 wait_serialising_requests(req); 2998 2999 if (flags & BDRV_REQ_COPY_ON_READ) { 3000 int pnum; 3001 3002 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum); 3003 if (ret < 0) { 3004 goto out; 3005 } 3006 3007 if (!ret || pnum != nb_sectors) { 3008 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov); 3009 goto out; 3010 } 3011 } 3012 3013 /* Forward the request to the BlockDriver */ 3014 if (!(bs->zero_beyond_eof && bs->growable)) { 3015 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov); 3016 } else { 3017 /* Read zeros after EOF of growable BDSes */ 3018 int64_t len, total_sectors, max_nb_sectors; 3019 3020 len = bdrv_getlength(bs); 3021 if (len < 0) { 3022 ret = len; 3023 goto out; 3024 } 3025 3026 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE); 3027 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num), 3028 align >> BDRV_SECTOR_BITS); 3029 if (max_nb_sectors > 0) { 3030 ret = drv->bdrv_co_readv(bs, sector_num, 3031 MIN(nb_sectors, max_nb_sectors), qiov); 3032 } else { 3033 ret = 0; 3034 } 3035 3036 /* Reading beyond end of file is supposed to produce zeroes */ 3037 if (ret == 0 && total_sectors < sector_num + nb_sectors) { 3038 uint64_t offset = MAX(0, total_sectors - sector_num); 3039 uint64_t bytes = (sector_num + nb_sectors - offset) * 3040 BDRV_SECTOR_SIZE; 3041 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes); 3042 } 3043 } 3044 3045 out: 3046 return ret; 3047 } 3048 3049 /* 3050 * Handle a read request in coroutine context 3051 */ 3052 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, 3053 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 3054 BdrvRequestFlags flags) 3055 { 3056 BlockDriver *drv = bs->drv; 3057 BdrvTrackedRequest req; 3058 3059 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ 3060 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); 3061 uint8_t *head_buf = NULL; 3062 uint8_t *tail_buf = NULL; 3063 QEMUIOVector local_qiov; 3064 bool use_local_qiov = false; 3065 int ret; 3066 3067 if (!drv) { 3068 return -ENOMEDIUM; 3069 } 3070 if (bdrv_check_byte_request(bs, offset, bytes)) { 3071 return -EIO; 3072 } 3073 3074 if (bs->copy_on_read) { 3075 flags |= BDRV_REQ_COPY_ON_READ; 3076 } 3077 3078 /* throttling disk I/O */ 3079 if (bs->io_limits_enabled) { 3080 bdrv_io_limits_intercept(bs, bytes, false); 3081 } 3082 3083 /* Align read if necessary by padding qiov */ 3084 if (offset & (align - 1)) { 3085 head_buf = qemu_blockalign(bs, align); 3086 qemu_iovec_init(&local_qiov, qiov->niov + 2); 3087 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); 3088 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3089 use_local_qiov = true; 3090 3091 bytes += offset & (align - 1); 3092 offset = offset & ~(align - 1); 3093 } 3094 3095 if ((offset + bytes) & (align - 1)) { 3096 if (!use_local_qiov) { 3097 qemu_iovec_init(&local_qiov, qiov->niov + 1); 3098 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3099 use_local_qiov = true; 3100 } 3101 tail_buf = qemu_blockalign(bs, align); 3102 qemu_iovec_add(&local_qiov, tail_buf, 3103 align - ((offset + bytes) & (align - 1))); 3104 3105 bytes = ROUND_UP(bytes, align); 3106 } 3107 3108 tracked_request_begin(&req, bs, offset, bytes, false); 3109 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align, 3110 use_local_qiov ? &local_qiov : qiov, 3111 flags); 3112 tracked_request_end(&req); 3113 3114 if (use_local_qiov) { 3115 qemu_iovec_destroy(&local_qiov); 3116 qemu_vfree(head_buf); 3117 qemu_vfree(tail_buf); 3118 } 3119 3120 return ret; 3121 } 3122 3123 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs, 3124 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, 3125 BdrvRequestFlags flags) 3126 { 3127 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) { 3128 return -EINVAL; 3129 } 3130 3131 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS, 3132 nb_sectors << BDRV_SECTOR_BITS, qiov, flags); 3133 } 3134 3135 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num, 3136 int nb_sectors, QEMUIOVector *qiov) 3137 { 3138 trace_bdrv_co_readv(bs, sector_num, nb_sectors); 3139 3140 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0); 3141 } 3142 3143 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs, 3144 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) 3145 { 3146 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors); 3147 3148 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 3149 BDRV_REQ_COPY_ON_READ); 3150 } 3151 3152 /* if no limit is specified in the BlockLimits use a default 3153 * of 32768 512-byte sectors (16 MiB) per request. 3154 */ 3155 #define MAX_WRITE_ZEROES_DEFAULT 32768 3156 3157 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, 3158 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags) 3159 { 3160 BlockDriver *drv = bs->drv; 3161 QEMUIOVector qiov; 3162 struct iovec iov = {0}; 3163 int ret = 0; 3164 3165 int max_write_zeroes = bs->bl.max_write_zeroes ? 3166 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT; 3167 3168 while (nb_sectors > 0 && !ret) { 3169 int num = nb_sectors; 3170 3171 /* Align request. Block drivers can expect the "bulk" of the request 3172 * to be aligned. 3173 */ 3174 if (bs->bl.write_zeroes_alignment 3175 && num > bs->bl.write_zeroes_alignment) { 3176 if (sector_num % bs->bl.write_zeroes_alignment != 0) { 3177 /* Make a small request up to the first aligned sector. */ 3178 num = bs->bl.write_zeroes_alignment; 3179 num -= sector_num % bs->bl.write_zeroes_alignment; 3180 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) { 3181 /* Shorten the request to the last aligned sector. num cannot 3182 * underflow because num > bs->bl.write_zeroes_alignment. 3183 */ 3184 num -= (sector_num + num) % bs->bl.write_zeroes_alignment; 3185 } 3186 } 3187 3188 /* limit request size */ 3189 if (num > max_write_zeroes) { 3190 num = max_write_zeroes; 3191 } 3192 3193 ret = -ENOTSUP; 3194 /* First try the efficient write zeroes operation */ 3195 if (drv->bdrv_co_write_zeroes) { 3196 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags); 3197 } 3198 3199 if (ret == -ENOTSUP) { 3200 /* Fall back to bounce buffer if write zeroes is unsupported */ 3201 iov.iov_len = num * BDRV_SECTOR_SIZE; 3202 if (iov.iov_base == NULL) { 3203 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE); 3204 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE); 3205 } 3206 qemu_iovec_init_external(&qiov, &iov, 1); 3207 3208 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov); 3209 3210 /* Keep bounce buffer around if it is big enough for all 3211 * all future requests. 3212 */ 3213 if (num < max_write_zeroes) { 3214 qemu_vfree(iov.iov_base); 3215 iov.iov_base = NULL; 3216 } 3217 } 3218 3219 sector_num += num; 3220 nb_sectors -= num; 3221 } 3222 3223 qemu_vfree(iov.iov_base); 3224 return ret; 3225 } 3226 3227 /* 3228 * Forwards an already correctly aligned write request to the BlockDriver. 3229 */ 3230 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs, 3231 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, 3232 QEMUIOVector *qiov, int flags) 3233 { 3234 BlockDriver *drv = bs->drv; 3235 bool waited; 3236 int ret; 3237 3238 int64_t sector_num = offset >> BDRV_SECTOR_BITS; 3239 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; 3240 3241 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); 3242 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); 3243 3244 waited = wait_serialising_requests(req); 3245 assert(!waited || !req->serialising); 3246 assert(req->overlap_offset <= offset); 3247 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes); 3248 3249 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req); 3250 3251 if (ret < 0) { 3252 /* Do nothing, write notifier decided to fail this request */ 3253 } else if (flags & BDRV_REQ_ZERO_WRITE) { 3254 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO); 3255 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags); 3256 } else { 3257 BLKDBG_EVENT(bs, BLKDBG_PWRITEV); 3258 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov); 3259 } 3260 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE); 3261 3262 if (ret == 0 && !bs->enable_write_cache) { 3263 ret = bdrv_co_flush(bs); 3264 } 3265 3266 bdrv_set_dirty(bs, sector_num, nb_sectors); 3267 3268 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) { 3269 bs->wr_highest_sector = sector_num + nb_sectors - 1; 3270 } 3271 if (bs->growable && ret >= 0) { 3272 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors); 3273 } 3274 3275 return ret; 3276 } 3277 3278 /* 3279 * Handle a write request in coroutine context 3280 */ 3281 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, 3282 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 3283 BdrvRequestFlags flags) 3284 { 3285 BdrvTrackedRequest req; 3286 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ 3287 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); 3288 uint8_t *head_buf = NULL; 3289 uint8_t *tail_buf = NULL; 3290 QEMUIOVector local_qiov; 3291 bool use_local_qiov = false; 3292 int ret; 3293 3294 if (!bs->drv) { 3295 return -ENOMEDIUM; 3296 } 3297 if (bs->read_only) { 3298 return -EACCES; 3299 } 3300 if (bdrv_check_byte_request(bs, offset, bytes)) { 3301 return -EIO; 3302 } 3303 3304 /* throttling disk I/O */ 3305 if (bs->io_limits_enabled) { 3306 bdrv_io_limits_intercept(bs, bytes, true); 3307 } 3308 3309 /* 3310 * Align write if necessary by performing a read-modify-write cycle. 3311 * Pad qiov with the read parts and be sure to have a tracked request not 3312 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle. 3313 */ 3314 tracked_request_begin(&req, bs, offset, bytes, true); 3315 3316 if (offset & (align - 1)) { 3317 QEMUIOVector head_qiov; 3318 struct iovec head_iov; 3319 3320 mark_request_serialising(&req, align); 3321 wait_serialising_requests(&req); 3322 3323 head_buf = qemu_blockalign(bs, align); 3324 head_iov = (struct iovec) { 3325 .iov_base = head_buf, 3326 .iov_len = align, 3327 }; 3328 qemu_iovec_init_external(&head_qiov, &head_iov, 1); 3329 3330 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD); 3331 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align, 3332 align, &head_qiov, 0); 3333 if (ret < 0) { 3334 goto fail; 3335 } 3336 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD); 3337 3338 qemu_iovec_init(&local_qiov, qiov->niov + 2); 3339 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); 3340 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3341 use_local_qiov = true; 3342 3343 bytes += offset & (align - 1); 3344 offset = offset & ~(align - 1); 3345 } 3346 3347 if ((offset + bytes) & (align - 1)) { 3348 QEMUIOVector tail_qiov; 3349 struct iovec tail_iov; 3350 size_t tail_bytes; 3351 bool waited; 3352 3353 mark_request_serialising(&req, align); 3354 waited = wait_serialising_requests(&req); 3355 assert(!waited || !use_local_qiov); 3356 3357 tail_buf = qemu_blockalign(bs, align); 3358 tail_iov = (struct iovec) { 3359 .iov_base = tail_buf, 3360 .iov_len = align, 3361 }; 3362 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1); 3363 3364 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL); 3365 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align, 3366 align, &tail_qiov, 0); 3367 if (ret < 0) { 3368 goto fail; 3369 } 3370 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL); 3371 3372 if (!use_local_qiov) { 3373 qemu_iovec_init(&local_qiov, qiov->niov + 1); 3374 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3375 use_local_qiov = true; 3376 } 3377 3378 tail_bytes = (offset + bytes) & (align - 1); 3379 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes); 3380 3381 bytes = ROUND_UP(bytes, align); 3382 } 3383 3384 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, 3385 use_local_qiov ? &local_qiov : qiov, 3386 flags); 3387 3388 fail: 3389 tracked_request_end(&req); 3390 3391 if (use_local_qiov) { 3392 qemu_iovec_destroy(&local_qiov); 3393 } 3394 qemu_vfree(head_buf); 3395 qemu_vfree(tail_buf); 3396 3397 return ret; 3398 } 3399 3400 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs, 3401 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, 3402 BdrvRequestFlags flags) 3403 { 3404 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) { 3405 return -EINVAL; 3406 } 3407 3408 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS, 3409 nb_sectors << BDRV_SECTOR_BITS, qiov, flags); 3410 } 3411 3412 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num, 3413 int nb_sectors, QEMUIOVector *qiov) 3414 { 3415 trace_bdrv_co_writev(bs, sector_num, nb_sectors); 3416 3417 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0); 3418 } 3419 3420 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs, 3421 int64_t sector_num, int nb_sectors, 3422 BdrvRequestFlags flags) 3423 { 3424 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags); 3425 3426 if (!(bs->open_flags & BDRV_O_UNMAP)) { 3427 flags &= ~BDRV_REQ_MAY_UNMAP; 3428 } 3429 3430 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL, 3431 BDRV_REQ_ZERO_WRITE | flags); 3432 } 3433 3434 /** 3435 * Truncate file to 'offset' bytes (needed only for file protocols) 3436 */ 3437 int bdrv_truncate(BlockDriverState *bs, int64_t offset) 3438 { 3439 BlockDriver *drv = bs->drv; 3440 int ret; 3441 if (!drv) 3442 return -ENOMEDIUM; 3443 if (!drv->bdrv_truncate) 3444 return -ENOTSUP; 3445 if (bs->read_only) 3446 return -EACCES; 3447 if (bdrv_in_use(bs)) 3448 return -EBUSY; 3449 ret = drv->bdrv_truncate(bs, offset); 3450 if (ret == 0) { 3451 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS); 3452 bdrv_dev_resize_cb(bs); 3453 } 3454 return ret; 3455 } 3456 3457 /** 3458 * Length of a allocated file in bytes. Sparse files are counted by actual 3459 * allocated space. Return < 0 if error or unknown. 3460 */ 3461 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs) 3462 { 3463 BlockDriver *drv = bs->drv; 3464 if (!drv) { 3465 return -ENOMEDIUM; 3466 } 3467 if (drv->bdrv_get_allocated_file_size) { 3468 return drv->bdrv_get_allocated_file_size(bs); 3469 } 3470 if (bs->file) { 3471 return bdrv_get_allocated_file_size(bs->file); 3472 } 3473 return -ENOTSUP; 3474 } 3475 3476 /** 3477 * Length of a file in bytes. Return < 0 if error or unknown. 3478 */ 3479 int64_t bdrv_getlength(BlockDriverState *bs) 3480 { 3481 BlockDriver *drv = bs->drv; 3482 if (!drv) 3483 return -ENOMEDIUM; 3484 3485 if (drv->has_variable_length) { 3486 int ret = refresh_total_sectors(bs, bs->total_sectors); 3487 if (ret < 0) { 3488 return ret; 3489 } 3490 } 3491 return bs->total_sectors * BDRV_SECTOR_SIZE; 3492 } 3493 3494 /* return 0 as number of sectors if no device present or error */ 3495 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr) 3496 { 3497 int64_t length; 3498 length = bdrv_getlength(bs); 3499 if (length < 0) 3500 length = 0; 3501 else 3502 length = length >> BDRV_SECTOR_BITS; 3503 *nb_sectors_ptr = length; 3504 } 3505 3506 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error, 3507 BlockdevOnError on_write_error) 3508 { 3509 bs->on_read_error = on_read_error; 3510 bs->on_write_error = on_write_error; 3511 } 3512 3513 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read) 3514 { 3515 return is_read ? bs->on_read_error : bs->on_write_error; 3516 } 3517 3518 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error) 3519 { 3520 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error; 3521 3522 switch (on_err) { 3523 case BLOCKDEV_ON_ERROR_ENOSPC: 3524 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT; 3525 case BLOCKDEV_ON_ERROR_STOP: 3526 return BDRV_ACTION_STOP; 3527 case BLOCKDEV_ON_ERROR_REPORT: 3528 return BDRV_ACTION_REPORT; 3529 case BLOCKDEV_ON_ERROR_IGNORE: 3530 return BDRV_ACTION_IGNORE; 3531 default: 3532 abort(); 3533 } 3534 } 3535 3536 /* This is done by device models because, while the block layer knows 3537 * about the error, it does not know whether an operation comes from 3538 * the device or the block layer (from a job, for example). 3539 */ 3540 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action, 3541 bool is_read, int error) 3542 { 3543 assert(error >= 0); 3544 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read); 3545 if (action == BDRV_ACTION_STOP) { 3546 vm_stop(RUN_STATE_IO_ERROR); 3547 bdrv_iostatus_set_err(bs, error); 3548 } 3549 } 3550 3551 int bdrv_is_read_only(BlockDriverState *bs) 3552 { 3553 return bs->read_only; 3554 } 3555 3556 int bdrv_is_sg(BlockDriverState *bs) 3557 { 3558 return bs->sg; 3559 } 3560 3561 int bdrv_enable_write_cache(BlockDriverState *bs) 3562 { 3563 return bs->enable_write_cache; 3564 } 3565 3566 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce) 3567 { 3568 bs->enable_write_cache = wce; 3569 3570 /* so a reopen() will preserve wce */ 3571 if (wce) { 3572 bs->open_flags |= BDRV_O_CACHE_WB; 3573 } else { 3574 bs->open_flags &= ~BDRV_O_CACHE_WB; 3575 } 3576 } 3577 3578 int bdrv_is_encrypted(BlockDriverState *bs) 3579 { 3580 if (bs->backing_hd && bs->backing_hd->encrypted) 3581 return 1; 3582 return bs->encrypted; 3583 } 3584 3585 int bdrv_key_required(BlockDriverState *bs) 3586 { 3587 BlockDriverState *backing_hd = bs->backing_hd; 3588 3589 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key) 3590 return 1; 3591 return (bs->encrypted && !bs->valid_key); 3592 } 3593 3594 int bdrv_set_key(BlockDriverState *bs, const char *key) 3595 { 3596 int ret; 3597 if (bs->backing_hd && bs->backing_hd->encrypted) { 3598 ret = bdrv_set_key(bs->backing_hd, key); 3599 if (ret < 0) 3600 return ret; 3601 if (!bs->encrypted) 3602 return 0; 3603 } 3604 if (!bs->encrypted) { 3605 return -EINVAL; 3606 } else if (!bs->drv || !bs->drv->bdrv_set_key) { 3607 return -ENOMEDIUM; 3608 } 3609 ret = bs->drv->bdrv_set_key(bs, key); 3610 if (ret < 0) { 3611 bs->valid_key = 0; 3612 } else if (!bs->valid_key) { 3613 bs->valid_key = 1; 3614 /* call the change callback now, we skipped it on open */ 3615 bdrv_dev_change_media_cb(bs, true); 3616 } 3617 return ret; 3618 } 3619 3620 const char *bdrv_get_format_name(BlockDriverState *bs) 3621 { 3622 return bs->drv ? bs->drv->format_name : NULL; 3623 } 3624 3625 void bdrv_iterate_format(void (*it)(void *opaque, const char *name), 3626 void *opaque) 3627 { 3628 BlockDriver *drv; 3629 int count = 0; 3630 const char **formats = NULL; 3631 3632 QLIST_FOREACH(drv, &bdrv_drivers, list) { 3633 if (drv->format_name) { 3634 bool found = false; 3635 int i = count; 3636 while (formats && i && !found) { 3637 found = !strcmp(formats[--i], drv->format_name); 3638 } 3639 3640 if (!found) { 3641 formats = g_realloc(formats, (count + 1) * sizeof(char *)); 3642 formats[count++] = drv->format_name; 3643 it(opaque, drv->format_name); 3644 } 3645 } 3646 } 3647 g_free(formats); 3648 } 3649 3650 /* This function is to find block backend bs */ 3651 BlockDriverState *bdrv_find(const char *name) 3652 { 3653 BlockDriverState *bs; 3654 3655 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3656 if (!strcmp(name, bs->device_name)) { 3657 return bs; 3658 } 3659 } 3660 return NULL; 3661 } 3662 3663 /* This function is to find a node in the bs graph */ 3664 BlockDriverState *bdrv_find_node(const char *node_name) 3665 { 3666 BlockDriverState *bs; 3667 3668 assert(node_name); 3669 3670 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) { 3671 if (!strcmp(node_name, bs->node_name)) { 3672 return bs; 3673 } 3674 } 3675 return NULL; 3676 } 3677 3678 /* Put this QMP function here so it can access the static graph_bdrv_states. */ 3679 BlockDeviceInfoList *bdrv_named_nodes_list(void) 3680 { 3681 BlockDeviceInfoList *list, *entry; 3682 BlockDriverState *bs; 3683 3684 list = NULL; 3685 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) { 3686 entry = g_malloc0(sizeof(*entry)); 3687 entry->value = bdrv_block_device_info(bs); 3688 entry->next = list; 3689 list = entry; 3690 } 3691 3692 return list; 3693 } 3694 3695 BlockDriverState *bdrv_lookup_bs(const char *device, 3696 const char *node_name, 3697 Error **errp) 3698 { 3699 BlockDriverState *bs = NULL; 3700 3701 if (device) { 3702 bs = bdrv_find(device); 3703 3704 if (bs) { 3705 return bs; 3706 } 3707 } 3708 3709 if (node_name) { 3710 bs = bdrv_find_node(node_name); 3711 3712 if (bs) { 3713 return bs; 3714 } 3715 } 3716 3717 error_setg(errp, "Cannot find device=%s nor node_name=%s", 3718 device ? device : "", 3719 node_name ? node_name : ""); 3720 return NULL; 3721 } 3722 3723 BlockDriverState *bdrv_next(BlockDriverState *bs) 3724 { 3725 if (!bs) { 3726 return QTAILQ_FIRST(&bdrv_states); 3727 } 3728 return QTAILQ_NEXT(bs, device_list); 3729 } 3730 3731 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque) 3732 { 3733 BlockDriverState *bs; 3734 3735 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3736 it(opaque, bs); 3737 } 3738 } 3739 3740 const char *bdrv_get_device_name(BlockDriverState *bs) 3741 { 3742 return bs->device_name; 3743 } 3744 3745 int bdrv_get_flags(BlockDriverState *bs) 3746 { 3747 return bs->open_flags; 3748 } 3749 3750 int bdrv_flush_all(void) 3751 { 3752 BlockDriverState *bs; 3753 int result = 0; 3754 3755 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3756 int ret = bdrv_flush(bs); 3757 if (ret < 0 && !result) { 3758 result = ret; 3759 } 3760 } 3761 3762 return result; 3763 } 3764 3765 int bdrv_has_zero_init_1(BlockDriverState *bs) 3766 { 3767 return 1; 3768 } 3769 3770 int bdrv_has_zero_init(BlockDriverState *bs) 3771 { 3772 assert(bs->drv); 3773 3774 /* If BS is a copy on write image, it is initialized to 3775 the contents of the base image, which may not be zeroes. */ 3776 if (bs->backing_hd) { 3777 return 0; 3778 } 3779 if (bs->drv->bdrv_has_zero_init) { 3780 return bs->drv->bdrv_has_zero_init(bs); 3781 } 3782 3783 /* safe default */ 3784 return 0; 3785 } 3786 3787 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs) 3788 { 3789 BlockDriverInfo bdi; 3790 3791 if (bs->backing_hd) { 3792 return false; 3793 } 3794 3795 if (bdrv_get_info(bs, &bdi) == 0) { 3796 return bdi.unallocated_blocks_are_zero; 3797 } 3798 3799 return false; 3800 } 3801 3802 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs) 3803 { 3804 BlockDriverInfo bdi; 3805 3806 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) { 3807 return false; 3808 } 3809 3810 if (bdrv_get_info(bs, &bdi) == 0) { 3811 return bdi.can_write_zeroes_with_unmap; 3812 } 3813 3814 return false; 3815 } 3816 3817 typedef struct BdrvCoGetBlockStatusData { 3818 BlockDriverState *bs; 3819 BlockDriverState *base; 3820 int64_t sector_num; 3821 int nb_sectors; 3822 int *pnum; 3823 int64_t ret; 3824 bool done; 3825 } BdrvCoGetBlockStatusData; 3826 3827 /* 3828 * Returns true iff the specified sector is present in the disk image. Drivers 3829 * not implementing the functionality are assumed to not support backing files, 3830 * hence all their sectors are reported as allocated. 3831 * 3832 * If 'sector_num' is beyond the end of the disk image the return value is 0 3833 * and 'pnum' is set to 0. 3834 * 3835 * 'pnum' is set to the number of sectors (including and immediately following 3836 * the specified sector) that are known to be in the same 3837 * allocated/unallocated state. 3838 * 3839 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes 3840 * beyond the end of the disk image it will be clamped. 3841 */ 3842 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, 3843 int64_t sector_num, 3844 int nb_sectors, int *pnum) 3845 { 3846 int64_t length; 3847 int64_t n; 3848 int64_t ret, ret2; 3849 3850 length = bdrv_getlength(bs); 3851 if (length < 0) { 3852 return length; 3853 } 3854 3855 if (sector_num >= (length >> BDRV_SECTOR_BITS)) { 3856 *pnum = 0; 3857 return 0; 3858 } 3859 3860 n = bs->total_sectors - sector_num; 3861 if (n < nb_sectors) { 3862 nb_sectors = n; 3863 } 3864 3865 if (!bs->drv->bdrv_co_get_block_status) { 3866 *pnum = nb_sectors; 3867 ret = BDRV_BLOCK_DATA; 3868 if (bs->drv->protocol_name) { 3869 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE); 3870 } 3871 return ret; 3872 } 3873 3874 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum); 3875 if (ret < 0) { 3876 *pnum = 0; 3877 return ret; 3878 } 3879 3880 if (ret & BDRV_BLOCK_RAW) { 3881 assert(ret & BDRV_BLOCK_OFFSET_VALID); 3882 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, 3883 *pnum, pnum); 3884 } 3885 3886 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) { 3887 if (bdrv_unallocated_blocks_are_zero(bs)) { 3888 ret |= BDRV_BLOCK_ZERO; 3889 } else if (bs->backing_hd) { 3890 BlockDriverState *bs2 = bs->backing_hd; 3891 int64_t length2 = bdrv_getlength(bs2); 3892 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) { 3893 ret |= BDRV_BLOCK_ZERO; 3894 } 3895 } 3896 } 3897 3898 if (bs->file && 3899 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) && 3900 (ret & BDRV_BLOCK_OFFSET_VALID)) { 3901 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, 3902 *pnum, pnum); 3903 if (ret2 >= 0) { 3904 /* Ignore errors. This is just providing extra information, it 3905 * is useful but not necessary. 3906 */ 3907 ret |= (ret2 & BDRV_BLOCK_ZERO); 3908 } 3909 } 3910 3911 return ret; 3912 } 3913 3914 /* Coroutine wrapper for bdrv_get_block_status() */ 3915 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque) 3916 { 3917 BdrvCoGetBlockStatusData *data = opaque; 3918 BlockDriverState *bs = data->bs; 3919 3920 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors, 3921 data->pnum); 3922 data->done = true; 3923 } 3924 3925 /* 3926 * Synchronous wrapper around bdrv_co_get_block_status(). 3927 * 3928 * See bdrv_co_get_block_status() for details. 3929 */ 3930 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num, 3931 int nb_sectors, int *pnum) 3932 { 3933 Coroutine *co; 3934 BdrvCoGetBlockStatusData data = { 3935 .bs = bs, 3936 .sector_num = sector_num, 3937 .nb_sectors = nb_sectors, 3938 .pnum = pnum, 3939 .done = false, 3940 }; 3941 3942 if (qemu_in_coroutine()) { 3943 /* Fast-path if already in coroutine context */ 3944 bdrv_get_block_status_co_entry(&data); 3945 } else { 3946 co = qemu_coroutine_create(bdrv_get_block_status_co_entry); 3947 qemu_coroutine_enter(co, &data); 3948 while (!data.done) { 3949 qemu_aio_wait(); 3950 } 3951 } 3952 return data.ret; 3953 } 3954 3955 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, 3956 int nb_sectors, int *pnum) 3957 { 3958 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum); 3959 if (ret < 0) { 3960 return ret; 3961 } 3962 return 3963 (ret & BDRV_BLOCK_DATA) || 3964 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs)); 3965 } 3966 3967 /* 3968 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP] 3969 * 3970 * Return true if the given sector is allocated in any image between 3971 * BASE and TOP (inclusive). BASE can be NULL to check if the given 3972 * sector is allocated in any image of the chain. Return false otherwise. 3973 * 3974 * 'pnum' is set to the number of sectors (including and immediately following 3975 * the specified sector) that are known to be in the same 3976 * allocated/unallocated state. 3977 * 3978 */ 3979 int bdrv_is_allocated_above(BlockDriverState *top, 3980 BlockDriverState *base, 3981 int64_t sector_num, 3982 int nb_sectors, int *pnum) 3983 { 3984 BlockDriverState *intermediate; 3985 int ret, n = nb_sectors; 3986 3987 intermediate = top; 3988 while (intermediate && intermediate != base) { 3989 int pnum_inter; 3990 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors, 3991 &pnum_inter); 3992 if (ret < 0) { 3993 return ret; 3994 } else if (ret) { 3995 *pnum = pnum_inter; 3996 return 1; 3997 } 3998 3999 /* 4000 * [sector_num, nb_sectors] is unallocated on top but intermediate 4001 * might have 4002 * 4003 * [sector_num+x, nr_sectors] allocated. 4004 */ 4005 if (n > pnum_inter && 4006 (intermediate == top || 4007 sector_num + pnum_inter < intermediate->total_sectors)) { 4008 n = pnum_inter; 4009 } 4010 4011 intermediate = intermediate->backing_hd; 4012 } 4013 4014 *pnum = n; 4015 return 0; 4016 } 4017 4018 const char *bdrv_get_encrypted_filename(BlockDriverState *bs) 4019 { 4020 if (bs->backing_hd && bs->backing_hd->encrypted) 4021 return bs->backing_file; 4022 else if (bs->encrypted) 4023 return bs->filename; 4024 else 4025 return NULL; 4026 } 4027 4028 void bdrv_get_backing_filename(BlockDriverState *bs, 4029 char *filename, int filename_size) 4030 { 4031 pstrcpy(filename, filename_size, bs->backing_file); 4032 } 4033 4034 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num, 4035 const uint8_t *buf, int nb_sectors) 4036 { 4037 BlockDriver *drv = bs->drv; 4038 if (!drv) 4039 return -ENOMEDIUM; 4040 if (!drv->bdrv_write_compressed) 4041 return -ENOTSUP; 4042 if (bdrv_check_request(bs, sector_num, nb_sectors)) 4043 return -EIO; 4044 4045 assert(QLIST_EMPTY(&bs->dirty_bitmaps)); 4046 4047 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors); 4048 } 4049 4050 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi) 4051 { 4052 BlockDriver *drv = bs->drv; 4053 if (!drv) 4054 return -ENOMEDIUM; 4055 if (!drv->bdrv_get_info) 4056 return -ENOTSUP; 4057 memset(bdi, 0, sizeof(*bdi)); 4058 return drv->bdrv_get_info(bs, bdi); 4059 } 4060 4061 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs) 4062 { 4063 BlockDriver *drv = bs->drv; 4064 if (drv && drv->bdrv_get_specific_info) { 4065 return drv->bdrv_get_specific_info(bs); 4066 } 4067 return NULL; 4068 } 4069 4070 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf, 4071 int64_t pos, int size) 4072 { 4073 QEMUIOVector qiov; 4074 struct iovec iov = { 4075 .iov_base = (void *) buf, 4076 .iov_len = size, 4077 }; 4078 4079 qemu_iovec_init_external(&qiov, &iov, 1); 4080 return bdrv_writev_vmstate(bs, &qiov, pos); 4081 } 4082 4083 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos) 4084 { 4085 BlockDriver *drv = bs->drv; 4086 4087 if (!drv) { 4088 return -ENOMEDIUM; 4089 } else if (drv->bdrv_save_vmstate) { 4090 return drv->bdrv_save_vmstate(bs, qiov, pos); 4091 } else if (bs->file) { 4092 return bdrv_writev_vmstate(bs->file, qiov, pos); 4093 } 4094 4095 return -ENOTSUP; 4096 } 4097 4098 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf, 4099 int64_t pos, int size) 4100 { 4101 BlockDriver *drv = bs->drv; 4102 if (!drv) 4103 return -ENOMEDIUM; 4104 if (drv->bdrv_load_vmstate) 4105 return drv->bdrv_load_vmstate(bs, buf, pos, size); 4106 if (bs->file) 4107 return bdrv_load_vmstate(bs->file, buf, pos, size); 4108 return -ENOTSUP; 4109 } 4110 4111 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event) 4112 { 4113 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) { 4114 return; 4115 } 4116 4117 bs->drv->bdrv_debug_event(bs, event); 4118 } 4119 4120 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event, 4121 const char *tag) 4122 { 4123 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) { 4124 bs = bs->file; 4125 } 4126 4127 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) { 4128 return bs->drv->bdrv_debug_breakpoint(bs, event, tag); 4129 } 4130 4131 return -ENOTSUP; 4132 } 4133 4134 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag) 4135 { 4136 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) { 4137 bs = bs->file; 4138 } 4139 4140 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) { 4141 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag); 4142 } 4143 4144 return -ENOTSUP; 4145 } 4146 4147 int bdrv_debug_resume(BlockDriverState *bs, const char *tag) 4148 { 4149 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) { 4150 bs = bs->file; 4151 } 4152 4153 if (bs && bs->drv && bs->drv->bdrv_debug_resume) { 4154 return bs->drv->bdrv_debug_resume(bs, tag); 4155 } 4156 4157 return -ENOTSUP; 4158 } 4159 4160 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag) 4161 { 4162 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) { 4163 bs = bs->file; 4164 } 4165 4166 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) { 4167 return bs->drv->bdrv_debug_is_suspended(bs, tag); 4168 } 4169 4170 return false; 4171 } 4172 4173 int bdrv_is_snapshot(BlockDriverState *bs) 4174 { 4175 return !!(bs->open_flags & BDRV_O_SNAPSHOT); 4176 } 4177 4178 /* backing_file can either be relative, or absolute, or a protocol. If it is 4179 * relative, it must be relative to the chain. So, passing in bs->filename 4180 * from a BDS as backing_file should not be done, as that may be relative to 4181 * the CWD rather than the chain. */ 4182 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs, 4183 const char *backing_file) 4184 { 4185 char *filename_full = NULL; 4186 char *backing_file_full = NULL; 4187 char *filename_tmp = NULL; 4188 int is_protocol = 0; 4189 BlockDriverState *curr_bs = NULL; 4190 BlockDriverState *retval = NULL; 4191 4192 if (!bs || !bs->drv || !backing_file) { 4193 return NULL; 4194 } 4195 4196 filename_full = g_malloc(PATH_MAX); 4197 backing_file_full = g_malloc(PATH_MAX); 4198 filename_tmp = g_malloc(PATH_MAX); 4199 4200 is_protocol = path_has_protocol(backing_file); 4201 4202 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) { 4203 4204 /* If either of the filename paths is actually a protocol, then 4205 * compare unmodified paths; otherwise make paths relative */ 4206 if (is_protocol || path_has_protocol(curr_bs->backing_file)) { 4207 if (strcmp(backing_file, curr_bs->backing_file) == 0) { 4208 retval = curr_bs->backing_hd; 4209 break; 4210 } 4211 } else { 4212 /* If not an absolute filename path, make it relative to the current 4213 * image's filename path */ 4214 path_combine(filename_tmp, PATH_MAX, curr_bs->filename, 4215 backing_file); 4216 4217 /* We are going to compare absolute pathnames */ 4218 if (!realpath(filename_tmp, filename_full)) { 4219 continue; 4220 } 4221 4222 /* We need to make sure the backing filename we are comparing against 4223 * is relative to the current image filename (or absolute) */ 4224 path_combine(filename_tmp, PATH_MAX, curr_bs->filename, 4225 curr_bs->backing_file); 4226 4227 if (!realpath(filename_tmp, backing_file_full)) { 4228 continue; 4229 } 4230 4231 if (strcmp(backing_file_full, filename_full) == 0) { 4232 retval = curr_bs->backing_hd; 4233 break; 4234 } 4235 } 4236 } 4237 4238 g_free(filename_full); 4239 g_free(backing_file_full); 4240 g_free(filename_tmp); 4241 return retval; 4242 } 4243 4244 int bdrv_get_backing_file_depth(BlockDriverState *bs) 4245 { 4246 if (!bs->drv) { 4247 return 0; 4248 } 4249 4250 if (!bs->backing_hd) { 4251 return 0; 4252 } 4253 4254 return 1 + bdrv_get_backing_file_depth(bs->backing_hd); 4255 } 4256 4257 BlockDriverState *bdrv_find_base(BlockDriverState *bs) 4258 { 4259 BlockDriverState *curr_bs = NULL; 4260 4261 if (!bs) { 4262 return NULL; 4263 } 4264 4265 curr_bs = bs; 4266 4267 while (curr_bs->backing_hd) { 4268 curr_bs = curr_bs->backing_hd; 4269 } 4270 return curr_bs; 4271 } 4272 4273 /**************************************************************/ 4274 /* async I/Os */ 4275 4276 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num, 4277 QEMUIOVector *qiov, int nb_sectors, 4278 BlockDriverCompletionFunc *cb, void *opaque) 4279 { 4280 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque); 4281 4282 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, 4283 cb, opaque, false); 4284 } 4285 4286 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num, 4287 QEMUIOVector *qiov, int nb_sectors, 4288 BlockDriverCompletionFunc *cb, void *opaque) 4289 { 4290 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque); 4291 4292 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, 4293 cb, opaque, true); 4294 } 4295 4296 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs, 4297 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags, 4298 BlockDriverCompletionFunc *cb, void *opaque) 4299 { 4300 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque); 4301 4302 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors, 4303 BDRV_REQ_ZERO_WRITE | flags, 4304 cb, opaque, true); 4305 } 4306 4307 4308 typedef struct MultiwriteCB { 4309 int error; 4310 int num_requests; 4311 int num_callbacks; 4312 struct { 4313 BlockDriverCompletionFunc *cb; 4314 void *opaque; 4315 QEMUIOVector *free_qiov; 4316 } callbacks[]; 4317 } MultiwriteCB; 4318 4319 static void multiwrite_user_cb(MultiwriteCB *mcb) 4320 { 4321 int i; 4322 4323 for (i = 0; i < mcb->num_callbacks; i++) { 4324 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error); 4325 if (mcb->callbacks[i].free_qiov) { 4326 qemu_iovec_destroy(mcb->callbacks[i].free_qiov); 4327 } 4328 g_free(mcb->callbacks[i].free_qiov); 4329 } 4330 } 4331 4332 static void multiwrite_cb(void *opaque, int ret) 4333 { 4334 MultiwriteCB *mcb = opaque; 4335 4336 trace_multiwrite_cb(mcb, ret); 4337 4338 if (ret < 0 && !mcb->error) { 4339 mcb->error = ret; 4340 } 4341 4342 mcb->num_requests--; 4343 if (mcb->num_requests == 0) { 4344 multiwrite_user_cb(mcb); 4345 g_free(mcb); 4346 } 4347 } 4348 4349 static int multiwrite_req_compare(const void *a, const void *b) 4350 { 4351 const BlockRequest *req1 = a, *req2 = b; 4352 4353 /* 4354 * Note that we can't simply subtract req2->sector from req1->sector 4355 * here as that could overflow the return value. 4356 */ 4357 if (req1->sector > req2->sector) { 4358 return 1; 4359 } else if (req1->sector < req2->sector) { 4360 return -1; 4361 } else { 4362 return 0; 4363 } 4364 } 4365 4366 /* 4367 * Takes a bunch of requests and tries to merge them. Returns the number of 4368 * requests that remain after merging. 4369 */ 4370 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs, 4371 int num_reqs, MultiwriteCB *mcb) 4372 { 4373 int i, outidx; 4374 4375 // Sort requests by start sector 4376 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare); 4377 4378 // Check if adjacent requests touch the same clusters. If so, combine them, 4379 // filling up gaps with zero sectors. 4380 outidx = 0; 4381 for (i = 1; i < num_reqs; i++) { 4382 int merge = 0; 4383 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors; 4384 4385 // Handle exactly sequential writes and overlapping writes. 4386 if (reqs[i].sector <= oldreq_last) { 4387 merge = 1; 4388 } 4389 4390 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) { 4391 merge = 0; 4392 } 4393 4394 if (merge) { 4395 size_t size; 4396 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov)); 4397 qemu_iovec_init(qiov, 4398 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1); 4399 4400 // Add the first request to the merged one. If the requests are 4401 // overlapping, drop the last sectors of the first request. 4402 size = (reqs[i].sector - reqs[outidx].sector) << 9; 4403 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size); 4404 4405 // We should need to add any zeros between the two requests 4406 assert (reqs[i].sector <= oldreq_last); 4407 4408 // Add the second request 4409 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size); 4410 4411 reqs[outidx].nb_sectors = qiov->size >> 9; 4412 reqs[outidx].qiov = qiov; 4413 4414 mcb->callbacks[i].free_qiov = reqs[outidx].qiov; 4415 } else { 4416 outidx++; 4417 reqs[outidx].sector = reqs[i].sector; 4418 reqs[outidx].nb_sectors = reqs[i].nb_sectors; 4419 reqs[outidx].qiov = reqs[i].qiov; 4420 } 4421 } 4422 4423 return outidx + 1; 4424 } 4425 4426 /* 4427 * Submit multiple AIO write requests at once. 4428 * 4429 * On success, the function returns 0 and all requests in the reqs array have 4430 * been submitted. In error case this function returns -1, and any of the 4431 * requests may or may not be submitted yet. In particular, this means that the 4432 * callback will be called for some of the requests, for others it won't. The 4433 * caller must check the error field of the BlockRequest to wait for the right 4434 * callbacks (if error != 0, no callback will be called). 4435 * 4436 * The implementation may modify the contents of the reqs array, e.g. to merge 4437 * requests. However, the fields opaque and error are left unmodified as they 4438 * are used to signal failure for a single request to the caller. 4439 */ 4440 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs) 4441 { 4442 MultiwriteCB *mcb; 4443 int i; 4444 4445 /* don't submit writes if we don't have a medium */ 4446 if (bs->drv == NULL) { 4447 for (i = 0; i < num_reqs; i++) { 4448 reqs[i].error = -ENOMEDIUM; 4449 } 4450 return -1; 4451 } 4452 4453 if (num_reqs == 0) { 4454 return 0; 4455 } 4456 4457 // Create MultiwriteCB structure 4458 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks)); 4459 mcb->num_requests = 0; 4460 mcb->num_callbacks = num_reqs; 4461 4462 for (i = 0; i < num_reqs; i++) { 4463 mcb->callbacks[i].cb = reqs[i].cb; 4464 mcb->callbacks[i].opaque = reqs[i].opaque; 4465 } 4466 4467 // Check for mergable requests 4468 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb); 4469 4470 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs); 4471 4472 /* Run the aio requests. */ 4473 mcb->num_requests = num_reqs; 4474 for (i = 0; i < num_reqs; i++) { 4475 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov, 4476 reqs[i].nb_sectors, reqs[i].flags, 4477 multiwrite_cb, mcb, 4478 true); 4479 } 4480 4481 return 0; 4482 } 4483 4484 void bdrv_aio_cancel(BlockDriverAIOCB *acb) 4485 { 4486 acb->aiocb_info->cancel(acb); 4487 } 4488 4489 /**************************************************************/ 4490 /* async block device emulation */ 4491 4492 typedef struct BlockDriverAIOCBSync { 4493 BlockDriverAIOCB common; 4494 QEMUBH *bh; 4495 int ret; 4496 /* vector translation state */ 4497 QEMUIOVector *qiov; 4498 uint8_t *bounce; 4499 int is_write; 4500 } BlockDriverAIOCBSync; 4501 4502 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb) 4503 { 4504 BlockDriverAIOCBSync *acb = 4505 container_of(blockacb, BlockDriverAIOCBSync, common); 4506 qemu_bh_delete(acb->bh); 4507 acb->bh = NULL; 4508 qemu_aio_release(acb); 4509 } 4510 4511 static const AIOCBInfo bdrv_em_aiocb_info = { 4512 .aiocb_size = sizeof(BlockDriverAIOCBSync), 4513 .cancel = bdrv_aio_cancel_em, 4514 }; 4515 4516 static void bdrv_aio_bh_cb(void *opaque) 4517 { 4518 BlockDriverAIOCBSync *acb = opaque; 4519 4520 if (!acb->is_write) 4521 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size); 4522 qemu_vfree(acb->bounce); 4523 acb->common.cb(acb->common.opaque, acb->ret); 4524 qemu_bh_delete(acb->bh); 4525 acb->bh = NULL; 4526 qemu_aio_release(acb); 4527 } 4528 4529 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs, 4530 int64_t sector_num, 4531 QEMUIOVector *qiov, 4532 int nb_sectors, 4533 BlockDriverCompletionFunc *cb, 4534 void *opaque, 4535 int is_write) 4536 4537 { 4538 BlockDriverAIOCBSync *acb; 4539 4540 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque); 4541 acb->is_write = is_write; 4542 acb->qiov = qiov; 4543 acb->bounce = qemu_blockalign(bs, qiov->size); 4544 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb); 4545 4546 if (is_write) { 4547 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size); 4548 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors); 4549 } else { 4550 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors); 4551 } 4552 4553 qemu_bh_schedule(acb->bh); 4554 4555 return &acb->common; 4556 } 4557 4558 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, 4559 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 4560 BlockDriverCompletionFunc *cb, void *opaque) 4561 { 4562 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0); 4563 } 4564 4565 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, 4566 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 4567 BlockDriverCompletionFunc *cb, void *opaque) 4568 { 4569 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1); 4570 } 4571 4572 4573 typedef struct BlockDriverAIOCBCoroutine { 4574 BlockDriverAIOCB common; 4575 BlockRequest req; 4576 bool is_write; 4577 bool *done; 4578 QEMUBH* bh; 4579 } BlockDriverAIOCBCoroutine; 4580 4581 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb) 4582 { 4583 BlockDriverAIOCBCoroutine *acb = 4584 container_of(blockacb, BlockDriverAIOCBCoroutine, common); 4585 bool done = false; 4586 4587 acb->done = &done; 4588 while (!done) { 4589 qemu_aio_wait(); 4590 } 4591 } 4592 4593 static const AIOCBInfo bdrv_em_co_aiocb_info = { 4594 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine), 4595 .cancel = bdrv_aio_co_cancel_em, 4596 }; 4597 4598 static void bdrv_co_em_bh(void *opaque) 4599 { 4600 BlockDriverAIOCBCoroutine *acb = opaque; 4601 4602 acb->common.cb(acb->common.opaque, acb->req.error); 4603 4604 if (acb->done) { 4605 *acb->done = true; 4606 } 4607 4608 qemu_bh_delete(acb->bh); 4609 qemu_aio_release(acb); 4610 } 4611 4612 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */ 4613 static void coroutine_fn bdrv_co_do_rw(void *opaque) 4614 { 4615 BlockDriverAIOCBCoroutine *acb = opaque; 4616 BlockDriverState *bs = acb->common.bs; 4617 4618 if (!acb->is_write) { 4619 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector, 4620 acb->req.nb_sectors, acb->req.qiov, acb->req.flags); 4621 } else { 4622 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector, 4623 acb->req.nb_sectors, acb->req.qiov, acb->req.flags); 4624 } 4625 4626 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb); 4627 qemu_bh_schedule(acb->bh); 4628 } 4629 4630 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, 4631 int64_t sector_num, 4632 QEMUIOVector *qiov, 4633 int nb_sectors, 4634 BdrvRequestFlags flags, 4635 BlockDriverCompletionFunc *cb, 4636 void *opaque, 4637 bool is_write) 4638 { 4639 Coroutine *co; 4640 BlockDriverAIOCBCoroutine *acb; 4641 4642 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4643 acb->req.sector = sector_num; 4644 acb->req.nb_sectors = nb_sectors; 4645 acb->req.qiov = qiov; 4646 acb->req.flags = flags; 4647 acb->is_write = is_write; 4648 acb->done = NULL; 4649 4650 co = qemu_coroutine_create(bdrv_co_do_rw); 4651 qemu_coroutine_enter(co, acb); 4652 4653 return &acb->common; 4654 } 4655 4656 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque) 4657 { 4658 BlockDriverAIOCBCoroutine *acb = opaque; 4659 BlockDriverState *bs = acb->common.bs; 4660 4661 acb->req.error = bdrv_co_flush(bs); 4662 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb); 4663 qemu_bh_schedule(acb->bh); 4664 } 4665 4666 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs, 4667 BlockDriverCompletionFunc *cb, void *opaque) 4668 { 4669 trace_bdrv_aio_flush(bs, opaque); 4670 4671 Coroutine *co; 4672 BlockDriverAIOCBCoroutine *acb; 4673 4674 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4675 acb->done = NULL; 4676 4677 co = qemu_coroutine_create(bdrv_aio_flush_co_entry); 4678 qemu_coroutine_enter(co, acb); 4679 4680 return &acb->common; 4681 } 4682 4683 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque) 4684 { 4685 BlockDriverAIOCBCoroutine *acb = opaque; 4686 BlockDriverState *bs = acb->common.bs; 4687 4688 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors); 4689 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb); 4690 qemu_bh_schedule(acb->bh); 4691 } 4692 4693 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs, 4694 int64_t sector_num, int nb_sectors, 4695 BlockDriverCompletionFunc *cb, void *opaque) 4696 { 4697 Coroutine *co; 4698 BlockDriverAIOCBCoroutine *acb; 4699 4700 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque); 4701 4702 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4703 acb->req.sector = sector_num; 4704 acb->req.nb_sectors = nb_sectors; 4705 acb->done = NULL; 4706 co = qemu_coroutine_create(bdrv_aio_discard_co_entry); 4707 qemu_coroutine_enter(co, acb); 4708 4709 return &acb->common; 4710 } 4711 4712 void bdrv_init(void) 4713 { 4714 module_call_init(MODULE_INIT_BLOCK); 4715 } 4716 4717 void bdrv_init_with_whitelist(void) 4718 { 4719 use_bdrv_whitelist = 1; 4720 bdrv_init(); 4721 } 4722 4723 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs, 4724 BlockDriverCompletionFunc *cb, void *opaque) 4725 { 4726 BlockDriverAIOCB *acb; 4727 4728 acb = g_slice_alloc(aiocb_info->aiocb_size); 4729 acb->aiocb_info = aiocb_info; 4730 acb->bs = bs; 4731 acb->cb = cb; 4732 acb->opaque = opaque; 4733 return acb; 4734 } 4735 4736 void qemu_aio_release(void *p) 4737 { 4738 BlockDriverAIOCB *acb = p; 4739 g_slice_free1(acb->aiocb_info->aiocb_size, acb); 4740 } 4741 4742 /**************************************************************/ 4743 /* Coroutine block device emulation */ 4744 4745 typedef struct CoroutineIOCompletion { 4746 Coroutine *coroutine; 4747 int ret; 4748 } CoroutineIOCompletion; 4749 4750 static void bdrv_co_io_em_complete(void *opaque, int ret) 4751 { 4752 CoroutineIOCompletion *co = opaque; 4753 4754 co->ret = ret; 4755 qemu_coroutine_enter(co->coroutine, NULL); 4756 } 4757 4758 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num, 4759 int nb_sectors, QEMUIOVector *iov, 4760 bool is_write) 4761 { 4762 CoroutineIOCompletion co = { 4763 .coroutine = qemu_coroutine_self(), 4764 }; 4765 BlockDriverAIOCB *acb; 4766 4767 if (is_write) { 4768 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors, 4769 bdrv_co_io_em_complete, &co); 4770 } else { 4771 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors, 4772 bdrv_co_io_em_complete, &co); 4773 } 4774 4775 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb); 4776 if (!acb) { 4777 return -EIO; 4778 } 4779 qemu_coroutine_yield(); 4780 4781 return co.ret; 4782 } 4783 4784 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, 4785 int64_t sector_num, int nb_sectors, 4786 QEMUIOVector *iov) 4787 { 4788 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false); 4789 } 4790 4791 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, 4792 int64_t sector_num, int nb_sectors, 4793 QEMUIOVector *iov) 4794 { 4795 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true); 4796 } 4797 4798 static void coroutine_fn bdrv_flush_co_entry(void *opaque) 4799 { 4800 RwCo *rwco = opaque; 4801 4802 rwco->ret = bdrv_co_flush(rwco->bs); 4803 } 4804 4805 int coroutine_fn bdrv_co_flush(BlockDriverState *bs) 4806 { 4807 int ret; 4808 4809 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) { 4810 return 0; 4811 } 4812 4813 /* Write back cached data to the OS even with cache=unsafe */ 4814 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS); 4815 if (bs->drv->bdrv_co_flush_to_os) { 4816 ret = bs->drv->bdrv_co_flush_to_os(bs); 4817 if (ret < 0) { 4818 return ret; 4819 } 4820 } 4821 4822 /* But don't actually force it to the disk with cache=unsafe */ 4823 if (bs->open_flags & BDRV_O_NO_FLUSH) { 4824 goto flush_parent; 4825 } 4826 4827 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK); 4828 if (bs->drv->bdrv_co_flush_to_disk) { 4829 ret = bs->drv->bdrv_co_flush_to_disk(bs); 4830 } else if (bs->drv->bdrv_aio_flush) { 4831 BlockDriverAIOCB *acb; 4832 CoroutineIOCompletion co = { 4833 .coroutine = qemu_coroutine_self(), 4834 }; 4835 4836 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co); 4837 if (acb == NULL) { 4838 ret = -EIO; 4839 } else { 4840 qemu_coroutine_yield(); 4841 ret = co.ret; 4842 } 4843 } else { 4844 /* 4845 * Some block drivers always operate in either writethrough or unsafe 4846 * mode and don't support bdrv_flush therefore. Usually qemu doesn't 4847 * know how the server works (because the behaviour is hardcoded or 4848 * depends on server-side configuration), so we can't ensure that 4849 * everything is safe on disk. Returning an error doesn't work because 4850 * that would break guests even if the server operates in writethrough 4851 * mode. 4852 * 4853 * Let's hope the user knows what he's doing. 4854 */ 4855 ret = 0; 4856 } 4857 if (ret < 0) { 4858 return ret; 4859 } 4860 4861 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH 4862 * in the case of cache=unsafe, so there are no useless flushes. 4863 */ 4864 flush_parent: 4865 return bdrv_co_flush(bs->file); 4866 } 4867 4868 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp) 4869 { 4870 Error *local_err = NULL; 4871 int ret; 4872 4873 if (!bs->drv) { 4874 return; 4875 } 4876 4877 if (bs->drv->bdrv_invalidate_cache) { 4878 bs->drv->bdrv_invalidate_cache(bs, &local_err); 4879 } else if (bs->file) { 4880 bdrv_invalidate_cache(bs->file, &local_err); 4881 } 4882 if (local_err) { 4883 error_propagate(errp, local_err); 4884 return; 4885 } 4886 4887 ret = refresh_total_sectors(bs, bs->total_sectors); 4888 if (ret < 0) { 4889 error_setg_errno(errp, -ret, "Could not refresh total sector count"); 4890 return; 4891 } 4892 } 4893 4894 void bdrv_invalidate_cache_all(Error **errp) 4895 { 4896 BlockDriverState *bs; 4897 Error *local_err = NULL; 4898 4899 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 4900 bdrv_invalidate_cache(bs, &local_err); 4901 if (local_err) { 4902 error_propagate(errp, local_err); 4903 return; 4904 } 4905 } 4906 } 4907 4908 void bdrv_clear_incoming_migration_all(void) 4909 { 4910 BlockDriverState *bs; 4911 4912 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 4913 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING); 4914 } 4915 } 4916 4917 int bdrv_flush(BlockDriverState *bs) 4918 { 4919 Coroutine *co; 4920 RwCo rwco = { 4921 .bs = bs, 4922 .ret = NOT_DONE, 4923 }; 4924 4925 if (qemu_in_coroutine()) { 4926 /* Fast-path if already in coroutine context */ 4927 bdrv_flush_co_entry(&rwco); 4928 } else { 4929 co = qemu_coroutine_create(bdrv_flush_co_entry); 4930 qemu_coroutine_enter(co, &rwco); 4931 while (rwco.ret == NOT_DONE) { 4932 qemu_aio_wait(); 4933 } 4934 } 4935 4936 return rwco.ret; 4937 } 4938 4939 typedef struct DiscardCo { 4940 BlockDriverState *bs; 4941 int64_t sector_num; 4942 int nb_sectors; 4943 int ret; 4944 } DiscardCo; 4945 static void coroutine_fn bdrv_discard_co_entry(void *opaque) 4946 { 4947 DiscardCo *rwco = opaque; 4948 4949 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors); 4950 } 4951 4952 /* if no limit is specified in the BlockLimits use a default 4953 * of 32768 512-byte sectors (16 MiB) per request. 4954 */ 4955 #define MAX_DISCARD_DEFAULT 32768 4956 4957 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num, 4958 int nb_sectors) 4959 { 4960 int max_discard; 4961 4962 if (!bs->drv) { 4963 return -ENOMEDIUM; 4964 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) { 4965 return -EIO; 4966 } else if (bs->read_only) { 4967 return -EROFS; 4968 } 4969 4970 bdrv_reset_dirty(bs, sector_num, nb_sectors); 4971 4972 /* Do nothing if disabled. */ 4973 if (!(bs->open_flags & BDRV_O_UNMAP)) { 4974 return 0; 4975 } 4976 4977 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) { 4978 return 0; 4979 } 4980 4981 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT; 4982 while (nb_sectors > 0) { 4983 int ret; 4984 int num = nb_sectors; 4985 4986 /* align request */ 4987 if (bs->bl.discard_alignment && 4988 num >= bs->bl.discard_alignment && 4989 sector_num % bs->bl.discard_alignment) { 4990 if (num > bs->bl.discard_alignment) { 4991 num = bs->bl.discard_alignment; 4992 } 4993 num -= sector_num % bs->bl.discard_alignment; 4994 } 4995 4996 /* limit request size */ 4997 if (num > max_discard) { 4998 num = max_discard; 4999 } 5000 5001 if (bs->drv->bdrv_co_discard) { 5002 ret = bs->drv->bdrv_co_discard(bs, sector_num, num); 5003 } else { 5004 BlockDriverAIOCB *acb; 5005 CoroutineIOCompletion co = { 5006 .coroutine = qemu_coroutine_self(), 5007 }; 5008 5009 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors, 5010 bdrv_co_io_em_complete, &co); 5011 if (acb == NULL) { 5012 return -EIO; 5013 } else { 5014 qemu_coroutine_yield(); 5015 ret = co.ret; 5016 } 5017 } 5018 if (ret && ret != -ENOTSUP) { 5019 return ret; 5020 } 5021 5022 sector_num += num; 5023 nb_sectors -= num; 5024 } 5025 return 0; 5026 } 5027 5028 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors) 5029 { 5030 Coroutine *co; 5031 DiscardCo rwco = { 5032 .bs = bs, 5033 .sector_num = sector_num, 5034 .nb_sectors = nb_sectors, 5035 .ret = NOT_DONE, 5036 }; 5037 5038 if (qemu_in_coroutine()) { 5039 /* Fast-path if already in coroutine context */ 5040 bdrv_discard_co_entry(&rwco); 5041 } else { 5042 co = qemu_coroutine_create(bdrv_discard_co_entry); 5043 qemu_coroutine_enter(co, &rwco); 5044 while (rwco.ret == NOT_DONE) { 5045 qemu_aio_wait(); 5046 } 5047 } 5048 5049 return rwco.ret; 5050 } 5051 5052 /**************************************************************/ 5053 /* removable device support */ 5054 5055 /** 5056 * Return TRUE if the media is present 5057 */ 5058 int bdrv_is_inserted(BlockDriverState *bs) 5059 { 5060 BlockDriver *drv = bs->drv; 5061 5062 if (!drv) 5063 return 0; 5064 if (!drv->bdrv_is_inserted) 5065 return 1; 5066 return drv->bdrv_is_inserted(bs); 5067 } 5068 5069 /** 5070 * Return whether the media changed since the last call to this 5071 * function, or -ENOTSUP if we don't know. Most drivers don't know. 5072 */ 5073 int bdrv_media_changed(BlockDriverState *bs) 5074 { 5075 BlockDriver *drv = bs->drv; 5076 5077 if (drv && drv->bdrv_media_changed) { 5078 return drv->bdrv_media_changed(bs); 5079 } 5080 return -ENOTSUP; 5081 } 5082 5083 /** 5084 * If eject_flag is TRUE, eject the media. Otherwise, close the tray 5085 */ 5086 void bdrv_eject(BlockDriverState *bs, bool eject_flag) 5087 { 5088 BlockDriver *drv = bs->drv; 5089 5090 if (drv && drv->bdrv_eject) { 5091 drv->bdrv_eject(bs, eject_flag); 5092 } 5093 5094 if (bs->device_name[0] != '\0') { 5095 bdrv_emit_qmp_eject_event(bs, eject_flag); 5096 } 5097 } 5098 5099 /** 5100 * Lock or unlock the media (if it is locked, the user won't be able 5101 * to eject it manually). 5102 */ 5103 void bdrv_lock_medium(BlockDriverState *bs, bool locked) 5104 { 5105 BlockDriver *drv = bs->drv; 5106 5107 trace_bdrv_lock_medium(bs, locked); 5108 5109 if (drv && drv->bdrv_lock_medium) { 5110 drv->bdrv_lock_medium(bs, locked); 5111 } 5112 } 5113 5114 /* needed for generic scsi interface */ 5115 5116 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) 5117 { 5118 BlockDriver *drv = bs->drv; 5119 5120 if (drv && drv->bdrv_ioctl) 5121 return drv->bdrv_ioctl(bs, req, buf); 5122 return -ENOTSUP; 5123 } 5124 5125 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs, 5126 unsigned long int req, void *buf, 5127 BlockDriverCompletionFunc *cb, void *opaque) 5128 { 5129 BlockDriver *drv = bs->drv; 5130 5131 if (drv && drv->bdrv_aio_ioctl) 5132 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque); 5133 return NULL; 5134 } 5135 5136 void bdrv_set_guest_block_size(BlockDriverState *bs, int align) 5137 { 5138 bs->guest_block_size = align; 5139 } 5140 5141 void *qemu_blockalign(BlockDriverState *bs, size_t size) 5142 { 5143 return qemu_memalign(bdrv_opt_mem_align(bs), size); 5144 } 5145 5146 /* 5147 * Check if all memory in this vector is sector aligned. 5148 */ 5149 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov) 5150 { 5151 int i; 5152 size_t alignment = bdrv_opt_mem_align(bs); 5153 5154 for (i = 0; i < qiov->niov; i++) { 5155 if ((uintptr_t) qiov->iov[i].iov_base % alignment) { 5156 return false; 5157 } 5158 if (qiov->iov[i].iov_len % alignment) { 5159 return false; 5160 } 5161 } 5162 5163 return true; 5164 } 5165 5166 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity, 5167 Error **errp) 5168 { 5169 int64_t bitmap_size; 5170 BdrvDirtyBitmap *bitmap; 5171 5172 assert((granularity & (granularity - 1)) == 0); 5173 5174 granularity >>= BDRV_SECTOR_BITS; 5175 assert(granularity); 5176 bitmap_size = bdrv_getlength(bs); 5177 if (bitmap_size < 0) { 5178 error_setg_errno(errp, -bitmap_size, "could not get length of device"); 5179 errno = -bitmap_size; 5180 return NULL; 5181 } 5182 bitmap_size >>= BDRV_SECTOR_BITS; 5183 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap)); 5184 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1); 5185 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list); 5186 return bitmap; 5187 } 5188 5189 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) 5190 { 5191 BdrvDirtyBitmap *bm, *next; 5192 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) { 5193 if (bm == bitmap) { 5194 QLIST_REMOVE(bitmap, list); 5195 hbitmap_free(bitmap->bitmap); 5196 g_free(bitmap); 5197 return; 5198 } 5199 } 5200 } 5201 5202 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) 5203 { 5204 BdrvDirtyBitmap *bm; 5205 BlockDirtyInfoList *list = NULL; 5206 BlockDirtyInfoList **plist = &list; 5207 5208 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) { 5209 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo)); 5210 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList)); 5211 info->count = bdrv_get_dirty_count(bs, bm); 5212 info->granularity = 5213 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap)); 5214 entry->value = info; 5215 *plist = entry; 5216 plist = &entry->next; 5217 } 5218 5219 return list; 5220 } 5221 5222 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector) 5223 { 5224 if (bitmap) { 5225 return hbitmap_get(bitmap->bitmap, sector); 5226 } else { 5227 return 0; 5228 } 5229 } 5230 5231 void bdrv_dirty_iter_init(BlockDriverState *bs, 5232 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi) 5233 { 5234 hbitmap_iter_init(hbi, bitmap->bitmap, 0); 5235 } 5236 5237 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, 5238 int nr_sectors) 5239 { 5240 BdrvDirtyBitmap *bitmap; 5241 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { 5242 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors); 5243 } 5244 } 5245 5246 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors) 5247 { 5248 BdrvDirtyBitmap *bitmap; 5249 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { 5250 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors); 5251 } 5252 } 5253 5254 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) 5255 { 5256 return hbitmap_count(bitmap->bitmap); 5257 } 5258 5259 /* Get a reference to bs */ 5260 void bdrv_ref(BlockDriverState *bs) 5261 { 5262 bs->refcnt++; 5263 } 5264 5265 /* Release a previously grabbed reference to bs. 5266 * If after releasing, reference count is zero, the BlockDriverState is 5267 * deleted. */ 5268 void bdrv_unref(BlockDriverState *bs) 5269 { 5270 assert(bs->refcnt > 0); 5271 if (--bs->refcnt == 0) { 5272 bdrv_delete(bs); 5273 } 5274 } 5275 5276 void bdrv_set_in_use(BlockDriverState *bs, int in_use) 5277 { 5278 assert(bs->in_use != in_use); 5279 bs->in_use = in_use; 5280 } 5281 5282 int bdrv_in_use(BlockDriverState *bs) 5283 { 5284 return bs->in_use; 5285 } 5286 5287 void bdrv_iostatus_enable(BlockDriverState *bs) 5288 { 5289 bs->iostatus_enabled = true; 5290 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK; 5291 } 5292 5293 /* The I/O status is only enabled if the drive explicitly 5294 * enables it _and_ the VM is configured to stop on errors */ 5295 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs) 5296 { 5297 return (bs->iostatus_enabled && 5298 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC || 5299 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP || 5300 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP)); 5301 } 5302 5303 void bdrv_iostatus_disable(BlockDriverState *bs) 5304 { 5305 bs->iostatus_enabled = false; 5306 } 5307 5308 void bdrv_iostatus_reset(BlockDriverState *bs) 5309 { 5310 if (bdrv_iostatus_is_enabled(bs)) { 5311 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK; 5312 if (bs->job) { 5313 block_job_iostatus_reset(bs->job); 5314 } 5315 } 5316 } 5317 5318 void bdrv_iostatus_set_err(BlockDriverState *bs, int error) 5319 { 5320 assert(bdrv_iostatus_is_enabled(bs)); 5321 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) { 5322 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE : 5323 BLOCK_DEVICE_IO_STATUS_FAILED; 5324 } 5325 } 5326 5327 void 5328 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes, 5329 enum BlockAcctType type) 5330 { 5331 assert(type < BDRV_MAX_IOTYPE); 5332 5333 cookie->bytes = bytes; 5334 cookie->start_time_ns = get_clock(); 5335 cookie->type = type; 5336 } 5337 5338 void 5339 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie) 5340 { 5341 assert(cookie->type < BDRV_MAX_IOTYPE); 5342 5343 bs->nr_bytes[cookie->type] += cookie->bytes; 5344 bs->nr_ops[cookie->type]++; 5345 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns; 5346 } 5347 5348 void bdrv_img_create(const char *filename, const char *fmt, 5349 const char *base_filename, const char *base_fmt, 5350 char *options, uint64_t img_size, int flags, 5351 Error **errp, bool quiet) 5352 { 5353 QEMUOptionParameter *param = NULL, *create_options = NULL; 5354 QEMUOptionParameter *backing_fmt, *backing_file, *size; 5355 BlockDriver *drv, *proto_drv; 5356 BlockDriver *backing_drv = NULL; 5357 Error *local_err = NULL; 5358 int ret = 0; 5359 5360 /* Find driver and parse its options */ 5361 drv = bdrv_find_format(fmt); 5362 if (!drv) { 5363 error_setg(errp, "Unknown file format '%s'", fmt); 5364 return; 5365 } 5366 5367 proto_drv = bdrv_find_protocol(filename, true); 5368 if (!proto_drv) { 5369 error_setg(errp, "Unknown protocol '%s'", filename); 5370 return; 5371 } 5372 5373 create_options = append_option_parameters(create_options, 5374 drv->create_options); 5375 create_options = append_option_parameters(create_options, 5376 proto_drv->create_options); 5377 5378 /* Create parameter list with default values */ 5379 param = parse_option_parameters("", create_options, param); 5380 5381 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size); 5382 5383 /* Parse -o options */ 5384 if (options) { 5385 param = parse_option_parameters(options, create_options, param); 5386 if (param == NULL) { 5387 error_setg(errp, "Invalid options for file format '%s'.", fmt); 5388 goto out; 5389 } 5390 } 5391 5392 if (base_filename) { 5393 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE, 5394 base_filename)) { 5395 error_setg(errp, "Backing file not supported for file format '%s'", 5396 fmt); 5397 goto out; 5398 } 5399 } 5400 5401 if (base_fmt) { 5402 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) { 5403 error_setg(errp, "Backing file format not supported for file " 5404 "format '%s'", fmt); 5405 goto out; 5406 } 5407 } 5408 5409 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE); 5410 if (backing_file && backing_file->value.s) { 5411 if (!strcmp(filename, backing_file->value.s)) { 5412 error_setg(errp, "Error: Trying to create an image with the " 5413 "same filename as the backing file"); 5414 goto out; 5415 } 5416 } 5417 5418 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT); 5419 if (backing_fmt && backing_fmt->value.s) { 5420 backing_drv = bdrv_find_format(backing_fmt->value.s); 5421 if (!backing_drv) { 5422 error_setg(errp, "Unknown backing file format '%s'", 5423 backing_fmt->value.s); 5424 goto out; 5425 } 5426 } 5427 5428 // The size for the image must always be specified, with one exception: 5429 // If we are using a backing file, we can obtain the size from there 5430 size = get_option_parameter(param, BLOCK_OPT_SIZE); 5431 if (size && size->value.n == -1) { 5432 if (backing_file && backing_file->value.s) { 5433 BlockDriverState *bs; 5434 uint64_t size; 5435 char buf[32]; 5436 int back_flags; 5437 5438 /* backing files always opened read-only */ 5439 back_flags = 5440 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING); 5441 5442 bs = NULL; 5443 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags, 5444 backing_drv, &local_err); 5445 if (ret < 0) { 5446 error_setg_errno(errp, -ret, "Could not open '%s': %s", 5447 backing_file->value.s, 5448 error_get_pretty(local_err)); 5449 error_free(local_err); 5450 local_err = NULL; 5451 goto out; 5452 } 5453 bdrv_get_geometry(bs, &size); 5454 size *= 512; 5455 5456 snprintf(buf, sizeof(buf), "%" PRId64, size); 5457 set_option_parameter(param, BLOCK_OPT_SIZE, buf); 5458 5459 bdrv_unref(bs); 5460 } else { 5461 error_setg(errp, "Image creation needs a size parameter"); 5462 goto out; 5463 } 5464 } 5465 5466 if (!quiet) { 5467 printf("Formatting '%s', fmt=%s ", filename, fmt); 5468 print_option_parameters(param); 5469 puts(""); 5470 } 5471 ret = bdrv_create(drv, filename, param, &local_err); 5472 if (ret == -EFBIG) { 5473 /* This is generally a better message than whatever the driver would 5474 * deliver (especially because of the cluster_size_hint), since that 5475 * is most probably not much different from "image too large". */ 5476 const char *cluster_size_hint = ""; 5477 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) { 5478 cluster_size_hint = " (try using a larger cluster size)"; 5479 } 5480 error_setg(errp, "The image size is too large for file format '%s'" 5481 "%s", fmt, cluster_size_hint); 5482 error_free(local_err); 5483 local_err = NULL; 5484 } 5485 5486 out: 5487 free_option_parameters(create_options); 5488 free_option_parameters(param); 5489 5490 if (local_err) { 5491 error_propagate(errp, local_err); 5492 } 5493 } 5494 5495 AioContext *bdrv_get_aio_context(BlockDriverState *bs) 5496 { 5497 /* Currently BlockDriverState always uses the main loop AioContext */ 5498 return qemu_get_aio_context(); 5499 } 5500 5501 void bdrv_add_before_write_notifier(BlockDriverState *bs, 5502 NotifierWithReturn *notifier) 5503 { 5504 notifier_with_return_list_add(&bs->before_write_notifiers, notifier); 5505 } 5506 5507 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options) 5508 { 5509 if (bs->drv->bdrv_amend_options == NULL) { 5510 return -ENOTSUP; 5511 } 5512 return bs->drv->bdrv_amend_options(bs, options); 5513 } 5514 5515 /* This function will be called by the bdrv_recurse_is_first_non_filter method 5516 * of block filter and by bdrv_is_first_non_filter. 5517 * It is used to test if the given bs is the candidate or recurse more in the 5518 * node graph. 5519 */ 5520 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs, 5521 BlockDriverState *candidate) 5522 { 5523 /* return false if basic checks fails */ 5524 if (!bs || !bs->drv) { 5525 return false; 5526 } 5527 5528 /* the code reached a non block filter driver -> check if the bs is 5529 * the same as the candidate. It's the recursion termination condition. 5530 */ 5531 if (!bs->drv->is_filter) { 5532 return bs == candidate; 5533 } 5534 /* Down this path the driver is a block filter driver */ 5535 5536 /* If the block filter recursion method is defined use it to recurse down 5537 * the node graph. 5538 */ 5539 if (bs->drv->bdrv_recurse_is_first_non_filter) { 5540 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate); 5541 } 5542 5543 /* the driver is a block filter but don't allow to recurse -> return false 5544 */ 5545 return false; 5546 } 5547 5548 /* This function checks if the candidate is the first non filter bs down it's 5549 * bs chain. Since we don't have pointers to parents it explore all bs chains 5550 * from the top. Some filters can choose not to pass down the recursion. 5551 */ 5552 bool bdrv_is_first_non_filter(BlockDriverState *candidate) 5553 { 5554 BlockDriverState *bs; 5555 5556 /* walk down the bs forest recursively */ 5557 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 5558 bool perm; 5559 5560 /* try to recurse in this top level bs */ 5561 perm = bdrv_recurse_is_first_non_filter(bs, candidate); 5562 5563 /* candidate is the first non filter */ 5564 if (perm) { 5565 return true; 5566 } 5567 } 5568 5569 return false; 5570 } 5571