xref: /openbmc/qemu/block.c (revision 95faaa73)
1 /*
2  * QEMU System Emulator block driver
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
38 
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48 
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52 
53 struct BdrvDirtyBitmap {
54     HBitmap *bitmap;
55     QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57 
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59 
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63         BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66         BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68                                          int64_t sector_num, int nb_sectors,
69                                          QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71                                          int64_t sector_num, int nb_sectors,
72                                          QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75     BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78     BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80                                                int64_t sector_num,
81                                                QEMUIOVector *qiov,
82                                                int nb_sectors,
83                                                BdrvRequestFlags flags,
84                                                BlockDriverCompletionFunc *cb,
85                                                void *opaque,
86                                                bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90 
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92     QTAILQ_HEAD_INITIALIZER(bdrv_states);
93 
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95     QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96 
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98     QLIST_HEAD_INITIALIZER(bdrv_drivers);
99 
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102 
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106     return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107              (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108             filename[1] == ':');
109 }
110 
111 int is_windows_drive(const char *filename)
112 {
113     if (is_windows_drive_prefix(filename) &&
114         filename[2] == '\0')
115         return 1;
116     if (strstart(filename, "\\\\.\\", NULL) ||
117         strstart(filename, "//./", NULL))
118         return 1;
119     return 0;
120 }
121 #endif
122 
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125                         ThrottleConfig *cfg)
126 {
127     int i;
128 
129     throttle_config(&bs->throttle_state, cfg);
130 
131     for (i = 0; i < 2; i++) {
132         qemu_co_enter_next(&bs->throttled_reqs[i]);
133     }
134 }
135 
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139     bool drained = false;
140     bool enabled = bs->io_limits_enabled;
141     int i;
142 
143     bs->io_limits_enabled = false;
144 
145     for (i = 0; i < 2; i++) {
146         while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147             drained = true;
148         }
149     }
150 
151     bs->io_limits_enabled = enabled;
152 
153     return drained;
154 }
155 
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158     bs->io_limits_enabled = false;
159 
160     bdrv_start_throttled_reqs(bs);
161 
162     throttle_destroy(&bs->throttle_state);
163 }
164 
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167     BlockDriverState *bs = opaque;
168     qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170 
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173     BlockDriverState *bs = opaque;
174     qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176 
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180     assert(!bs->io_limits_enabled);
181     throttle_init(&bs->throttle_state,
182                   QEMU_CLOCK_VIRTUAL,
183                   bdrv_throttle_read_timer_cb,
184                   bdrv_throttle_write_timer_cb,
185                   bs);
186     bs->io_limits_enabled = true;
187 }
188 
189 /* This function makes an IO wait if needed
190  *
191  * @nb_sectors: the number of sectors of the IO
192  * @is_write:   is the IO a write
193  */
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195                                      unsigned int bytes,
196                                      bool is_write)
197 {
198     /* does this io must wait */
199     bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
200 
201     /* if must wait or any request of this type throttled queue the IO */
202     if (must_wait ||
203         !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204         qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
205     }
206 
207     /* the IO will be executed, do the accounting */
208     throttle_account(&bs->throttle_state, is_write, bytes);
209 
210 
211     /* if the next request must wait -> do nothing */
212     if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213         return;
214     }
215 
216     /* else queue next request for execution */
217     qemu_co_queue_next(&bs->throttled_reqs[is_write]);
218 }
219 
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
221 {
222     if (!bs || !bs->drv) {
223         /* 4k should be on the safe side */
224         return 4096;
225     }
226 
227     return bs->bl.opt_mem_alignment;
228 }
229 
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
232 {
233     const char *p;
234 
235 #ifdef _WIN32
236     if (is_windows_drive(path) ||
237         is_windows_drive_prefix(path)) {
238         return 0;
239     }
240     p = path + strcspn(path, ":/\\");
241 #else
242     p = path + strcspn(path, ":/");
243 #endif
244 
245     return *p == ':';
246 }
247 
248 int path_is_absolute(const char *path)
249 {
250 #ifdef _WIN32
251     /* specific case for names like: "\\.\d:" */
252     if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253         return 1;
254     }
255     return (*path == '/' || *path == '\\');
256 #else
257     return (*path == '/');
258 #endif
259 }
260 
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262    path to it by considering it is relative to base_path. URL are
263    supported. */
264 void path_combine(char *dest, int dest_size,
265                   const char *base_path,
266                   const char *filename)
267 {
268     const char *p, *p1;
269     int len;
270 
271     if (dest_size <= 0)
272         return;
273     if (path_is_absolute(filename)) {
274         pstrcpy(dest, dest_size, filename);
275     } else {
276         p = strchr(base_path, ':');
277         if (p)
278             p++;
279         else
280             p = base_path;
281         p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
283         {
284             const char *p2;
285             p2 = strrchr(base_path, '\\');
286             if (!p1 || p2 > p1)
287                 p1 = p2;
288         }
289 #endif
290         if (p1)
291             p1++;
292         else
293             p1 = base_path;
294         if (p1 > p)
295             p = p1;
296         len = p - base_path;
297         if (len > dest_size - 1)
298             len = dest_size - 1;
299         memcpy(dest, base_path, len);
300         dest[len] = '\0';
301         pstrcat(dest, dest_size, filename);
302     }
303 }
304 
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
306 {
307     if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308         pstrcpy(dest, sz, bs->backing_file);
309     } else {
310         path_combine(dest, sz, bs->filename, bs->backing_file);
311     }
312 }
313 
314 void bdrv_register(BlockDriver *bdrv)
315 {
316     /* Block drivers without coroutine functions need emulation */
317     if (!bdrv->bdrv_co_readv) {
318         bdrv->bdrv_co_readv = bdrv_co_readv_em;
319         bdrv->bdrv_co_writev = bdrv_co_writev_em;
320 
321         /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322          * the block driver lacks aio we need to emulate that too.
323          */
324         if (!bdrv->bdrv_aio_readv) {
325             /* add AIO emulation layer */
326             bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327             bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
328         }
329     }
330 
331     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
332 }
333 
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
336 {
337     BlockDriverState *bs;
338     int i;
339 
340     if (bdrv_find(device_name)) {
341         error_setg(errp, "Device with id '%s' already exists",
342                    device_name);
343         return NULL;
344     }
345     if (bdrv_find_node(device_name)) {
346         error_setg(errp, "Device with node-name '%s' already exists",
347                    device_name);
348         return NULL;
349     }
350 
351     bs = g_malloc0(sizeof(BlockDriverState));
352     QLIST_INIT(&bs->dirty_bitmaps);
353     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
354     if (device_name[0] != '\0') {
355         QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
356     }
357     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
358         QLIST_INIT(&bs->op_blockers[i]);
359     }
360     bdrv_iostatus_disable(bs);
361     notifier_list_init(&bs->close_notifiers);
362     notifier_with_return_list_init(&bs->before_write_notifiers);
363     qemu_co_queue_init(&bs->throttled_reqs[0]);
364     qemu_co_queue_init(&bs->throttled_reqs[1]);
365     bs->refcnt = 1;
366 
367     return bs;
368 }
369 
370 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
371 {
372     notifier_list_add(&bs->close_notifiers, notify);
373 }
374 
375 BlockDriver *bdrv_find_format(const char *format_name)
376 {
377     BlockDriver *drv1;
378     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
379         if (!strcmp(drv1->format_name, format_name)) {
380             return drv1;
381         }
382     }
383     return NULL;
384 }
385 
386 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
387 {
388     static const char *whitelist_rw[] = {
389         CONFIG_BDRV_RW_WHITELIST
390     };
391     static const char *whitelist_ro[] = {
392         CONFIG_BDRV_RO_WHITELIST
393     };
394     const char **p;
395 
396     if (!whitelist_rw[0] && !whitelist_ro[0]) {
397         return 1;               /* no whitelist, anything goes */
398     }
399 
400     for (p = whitelist_rw; *p; p++) {
401         if (!strcmp(drv->format_name, *p)) {
402             return 1;
403         }
404     }
405     if (read_only) {
406         for (p = whitelist_ro; *p; p++) {
407             if (!strcmp(drv->format_name, *p)) {
408                 return 1;
409             }
410         }
411     }
412     return 0;
413 }
414 
415 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
416                                           bool read_only)
417 {
418     BlockDriver *drv = bdrv_find_format(format_name);
419     return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
420 }
421 
422 typedef struct CreateCo {
423     BlockDriver *drv;
424     char *filename;
425     QEMUOptionParameter *options;
426     int ret;
427     Error *err;
428 } CreateCo;
429 
430 static void coroutine_fn bdrv_create_co_entry(void *opaque)
431 {
432     Error *local_err = NULL;
433     int ret;
434 
435     CreateCo *cco = opaque;
436     assert(cco->drv);
437 
438     ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
439     if (local_err) {
440         error_propagate(&cco->err, local_err);
441     }
442     cco->ret = ret;
443 }
444 
445 int bdrv_create(BlockDriver *drv, const char* filename,
446     QEMUOptionParameter *options, Error **errp)
447 {
448     int ret;
449 
450     Coroutine *co;
451     CreateCo cco = {
452         .drv = drv,
453         .filename = g_strdup(filename),
454         .options = options,
455         .ret = NOT_DONE,
456         .err = NULL,
457     };
458 
459     if (!drv->bdrv_create) {
460         error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
461         ret = -ENOTSUP;
462         goto out;
463     }
464 
465     if (qemu_in_coroutine()) {
466         /* Fast-path if already in coroutine context */
467         bdrv_create_co_entry(&cco);
468     } else {
469         co = qemu_coroutine_create(bdrv_create_co_entry);
470         qemu_coroutine_enter(co, &cco);
471         while (cco.ret == NOT_DONE) {
472             qemu_aio_wait();
473         }
474     }
475 
476     ret = cco.ret;
477     if (ret < 0) {
478         if (cco.err) {
479             error_propagate(errp, cco.err);
480         } else {
481             error_setg_errno(errp, -ret, "Could not create image");
482         }
483     }
484 
485 out:
486     g_free(cco.filename);
487     return ret;
488 }
489 
490 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
491                      Error **errp)
492 {
493     BlockDriver *drv;
494     Error *local_err = NULL;
495     int ret;
496 
497     drv = bdrv_find_protocol(filename, true);
498     if (drv == NULL) {
499         error_setg(errp, "Could not find protocol for file '%s'", filename);
500         return -ENOENT;
501     }
502 
503     ret = bdrv_create(drv, filename, options, &local_err);
504     if (local_err) {
505         error_propagate(errp, local_err);
506     }
507     return ret;
508 }
509 
510 int bdrv_refresh_limits(BlockDriverState *bs)
511 {
512     BlockDriver *drv = bs->drv;
513 
514     memset(&bs->bl, 0, sizeof(bs->bl));
515 
516     if (!drv) {
517         return 0;
518     }
519 
520     /* Take some limits from the children as a default */
521     if (bs->file) {
522         bdrv_refresh_limits(bs->file);
523         bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
524         bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
525     } else {
526         bs->bl.opt_mem_alignment = 512;
527     }
528 
529     if (bs->backing_hd) {
530         bdrv_refresh_limits(bs->backing_hd);
531         bs->bl.opt_transfer_length =
532             MAX(bs->bl.opt_transfer_length,
533                 bs->backing_hd->bl.opt_transfer_length);
534         bs->bl.opt_mem_alignment =
535             MAX(bs->bl.opt_mem_alignment,
536                 bs->backing_hd->bl.opt_mem_alignment);
537     }
538 
539     /* Then let the driver override it */
540     if (drv->bdrv_refresh_limits) {
541         return drv->bdrv_refresh_limits(bs);
542     }
543 
544     return 0;
545 }
546 
547 /*
548  * Create a uniquely-named empty temporary file.
549  * Return 0 upon success, otherwise a negative errno value.
550  */
551 int get_tmp_filename(char *filename, int size)
552 {
553 #ifdef _WIN32
554     char temp_dir[MAX_PATH];
555     /* GetTempFileName requires that its output buffer (4th param)
556        have length MAX_PATH or greater.  */
557     assert(size >= MAX_PATH);
558     return (GetTempPath(MAX_PATH, temp_dir)
559             && GetTempFileName(temp_dir, "qem", 0, filename)
560             ? 0 : -GetLastError());
561 #else
562     int fd;
563     const char *tmpdir;
564     tmpdir = getenv("TMPDIR");
565     if (!tmpdir) {
566         tmpdir = "/var/tmp";
567     }
568     if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
569         return -EOVERFLOW;
570     }
571     fd = mkstemp(filename);
572     if (fd < 0) {
573         return -errno;
574     }
575     if (close(fd) != 0) {
576         unlink(filename);
577         return -errno;
578     }
579     return 0;
580 #endif
581 }
582 
583 /*
584  * Detect host devices. By convention, /dev/cdrom[N] is always
585  * recognized as a host CDROM.
586  */
587 static BlockDriver *find_hdev_driver(const char *filename)
588 {
589     int score_max = 0, score;
590     BlockDriver *drv = NULL, *d;
591 
592     QLIST_FOREACH(d, &bdrv_drivers, list) {
593         if (d->bdrv_probe_device) {
594             score = d->bdrv_probe_device(filename);
595             if (score > score_max) {
596                 score_max = score;
597                 drv = d;
598             }
599         }
600     }
601 
602     return drv;
603 }
604 
605 BlockDriver *bdrv_find_protocol(const char *filename,
606                                 bool allow_protocol_prefix)
607 {
608     BlockDriver *drv1;
609     char protocol[128];
610     int len;
611     const char *p;
612 
613     /* TODO Drivers without bdrv_file_open must be specified explicitly */
614 
615     /*
616      * XXX(hch): we really should not let host device detection
617      * override an explicit protocol specification, but moving this
618      * later breaks access to device names with colons in them.
619      * Thanks to the brain-dead persistent naming schemes on udev-
620      * based Linux systems those actually are quite common.
621      */
622     drv1 = find_hdev_driver(filename);
623     if (drv1) {
624         return drv1;
625     }
626 
627     if (!path_has_protocol(filename) || !allow_protocol_prefix) {
628         return bdrv_find_format("file");
629     }
630 
631     p = strchr(filename, ':');
632     assert(p != NULL);
633     len = p - filename;
634     if (len > sizeof(protocol) - 1)
635         len = sizeof(protocol) - 1;
636     memcpy(protocol, filename, len);
637     protocol[len] = '\0';
638     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
639         if (drv1->protocol_name &&
640             !strcmp(drv1->protocol_name, protocol)) {
641             return drv1;
642         }
643     }
644     return NULL;
645 }
646 
647 static int find_image_format(BlockDriverState *bs, const char *filename,
648                              BlockDriver **pdrv, Error **errp)
649 {
650     int score, score_max;
651     BlockDriver *drv1, *drv;
652     uint8_t buf[2048];
653     int ret = 0;
654 
655     /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
656     if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
657         drv = bdrv_find_format("raw");
658         if (!drv) {
659             error_setg(errp, "Could not find raw image format");
660             ret = -ENOENT;
661         }
662         *pdrv = drv;
663         return ret;
664     }
665 
666     ret = bdrv_pread(bs, 0, buf, sizeof(buf));
667     if (ret < 0) {
668         error_setg_errno(errp, -ret, "Could not read image for determining its "
669                          "format");
670         *pdrv = NULL;
671         return ret;
672     }
673 
674     score_max = 0;
675     drv = NULL;
676     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
677         if (drv1->bdrv_probe) {
678             score = drv1->bdrv_probe(buf, ret, filename);
679             if (score > score_max) {
680                 score_max = score;
681                 drv = drv1;
682             }
683         }
684     }
685     if (!drv) {
686         error_setg(errp, "Could not determine image format: No compatible "
687                    "driver found");
688         ret = -ENOENT;
689     }
690     *pdrv = drv;
691     return ret;
692 }
693 
694 /**
695  * Set the current 'total_sectors' value
696  */
697 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
698 {
699     BlockDriver *drv = bs->drv;
700 
701     /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
702     if (bs->sg)
703         return 0;
704 
705     /* query actual device if possible, otherwise just trust the hint */
706     if (drv->bdrv_getlength) {
707         int64_t length = drv->bdrv_getlength(bs);
708         if (length < 0) {
709             return length;
710         }
711         hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
712     }
713 
714     bs->total_sectors = hint;
715     return 0;
716 }
717 
718 /**
719  * Set open flags for a given discard mode
720  *
721  * Return 0 on success, -1 if the discard mode was invalid.
722  */
723 int bdrv_parse_discard_flags(const char *mode, int *flags)
724 {
725     *flags &= ~BDRV_O_UNMAP;
726 
727     if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
728         /* do nothing */
729     } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
730         *flags |= BDRV_O_UNMAP;
731     } else {
732         return -1;
733     }
734 
735     return 0;
736 }
737 
738 /**
739  * Set open flags for a given cache mode
740  *
741  * Return 0 on success, -1 if the cache mode was invalid.
742  */
743 int bdrv_parse_cache_flags(const char *mode, int *flags)
744 {
745     *flags &= ~BDRV_O_CACHE_MASK;
746 
747     if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
748         *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
749     } else if (!strcmp(mode, "directsync")) {
750         *flags |= BDRV_O_NOCACHE;
751     } else if (!strcmp(mode, "writeback")) {
752         *flags |= BDRV_O_CACHE_WB;
753     } else if (!strcmp(mode, "unsafe")) {
754         *flags |= BDRV_O_CACHE_WB;
755         *flags |= BDRV_O_NO_FLUSH;
756     } else if (!strcmp(mode, "writethrough")) {
757         /* this is the default */
758     } else {
759         return -1;
760     }
761 
762     return 0;
763 }
764 
765 /**
766  * The copy-on-read flag is actually a reference count so multiple users may
767  * use the feature without worrying about clobbering its previous state.
768  * Copy-on-read stays enabled until all users have called to disable it.
769  */
770 void bdrv_enable_copy_on_read(BlockDriverState *bs)
771 {
772     bs->copy_on_read++;
773 }
774 
775 void bdrv_disable_copy_on_read(BlockDriverState *bs)
776 {
777     assert(bs->copy_on_read > 0);
778     bs->copy_on_read--;
779 }
780 
781 /*
782  * Returns the flags that a temporary snapshot should get, based on the
783  * originally requested flags (the originally requested image will have flags
784  * like a backing file)
785  */
786 static int bdrv_temp_snapshot_flags(int flags)
787 {
788     return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
789 }
790 
791 /*
792  * Returns the flags that bs->file should get, based on the given flags for
793  * the parent BDS
794  */
795 static int bdrv_inherited_flags(int flags)
796 {
797     /* Enable protocol handling, disable format probing for bs->file */
798     flags |= BDRV_O_PROTOCOL;
799 
800     /* Our block drivers take care to send flushes and respect unmap policy,
801      * so we can enable both unconditionally on lower layers. */
802     flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
803 
804     /* Clear flags that only apply to the top layer */
805     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
806 
807     return flags;
808 }
809 
810 /*
811  * Returns the flags that bs->backing_hd should get, based on the given flags
812  * for the parent BDS
813  */
814 static int bdrv_backing_flags(int flags)
815 {
816     /* backing files always opened read-only */
817     flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
818 
819     /* snapshot=on is handled on the top layer */
820     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
821 
822     return flags;
823 }
824 
825 static int bdrv_open_flags(BlockDriverState *bs, int flags)
826 {
827     int open_flags = flags | BDRV_O_CACHE_WB;
828 
829     /*
830      * Clear flags that are internal to the block layer before opening the
831      * image.
832      */
833     open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
834 
835     /*
836      * Snapshots should be writable.
837      */
838     if (flags & BDRV_O_TEMPORARY) {
839         open_flags |= BDRV_O_RDWR;
840     }
841 
842     return open_flags;
843 }
844 
845 static void bdrv_assign_node_name(BlockDriverState *bs,
846                                   const char *node_name,
847                                   Error **errp)
848 {
849     if (!node_name) {
850         return;
851     }
852 
853     /* empty string node name is invalid */
854     if (node_name[0] == '\0') {
855         error_setg(errp, "Empty node name");
856         return;
857     }
858 
859     /* takes care of avoiding namespaces collisions */
860     if (bdrv_find(node_name)) {
861         error_setg(errp, "node-name=%s is conflicting with a device id",
862                    node_name);
863         return;
864     }
865 
866     /* takes care of avoiding duplicates node names */
867     if (bdrv_find_node(node_name)) {
868         error_setg(errp, "Duplicate node name");
869         return;
870     }
871 
872     /* copy node name into the bs and insert it into the graph list */
873     pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
874     QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
875 }
876 
877 /*
878  * Common part for opening disk images and files
879  *
880  * Removes all processed options from *options.
881  */
882 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
883     QDict *options, int flags, BlockDriver *drv, Error **errp)
884 {
885     int ret, open_flags;
886     const char *filename;
887     const char *node_name = NULL;
888     Error *local_err = NULL;
889 
890     assert(drv != NULL);
891     assert(bs->file == NULL);
892     assert(options != NULL && bs->options != options);
893 
894     if (file != NULL) {
895         filename = file->filename;
896     } else {
897         filename = qdict_get_try_str(options, "filename");
898     }
899 
900     if (drv->bdrv_needs_filename && !filename) {
901         error_setg(errp, "The '%s' block driver requires a file name",
902                    drv->format_name);
903         return -EINVAL;
904     }
905 
906     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
907 
908     node_name = qdict_get_try_str(options, "node-name");
909     bdrv_assign_node_name(bs, node_name, &local_err);
910     if (local_err) {
911         error_propagate(errp, local_err);
912         return -EINVAL;
913     }
914     qdict_del(options, "node-name");
915 
916     /* bdrv_open() with directly using a protocol as drv. This layer is already
917      * opened, so assign it to bs (while file becomes a closed BlockDriverState)
918      * and return immediately. */
919     if (file != NULL && drv->bdrv_file_open) {
920         bdrv_swap(file, bs);
921         return 0;
922     }
923 
924     bs->open_flags = flags;
925     bs->guest_block_size = 512;
926     bs->request_alignment = 512;
927     bs->zero_beyond_eof = true;
928     open_flags = bdrv_open_flags(bs, flags);
929     bs->read_only = !(open_flags & BDRV_O_RDWR);
930 
931     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
932         error_setg(errp,
933                    !bs->read_only && bdrv_is_whitelisted(drv, true)
934                         ? "Driver '%s' can only be used for read-only devices"
935                         : "Driver '%s' is not whitelisted",
936                    drv->format_name);
937         return -ENOTSUP;
938     }
939 
940     assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
941     if (flags & BDRV_O_COPY_ON_READ) {
942         if (!bs->read_only) {
943             bdrv_enable_copy_on_read(bs);
944         } else {
945             error_setg(errp, "Can't use copy-on-read on read-only device");
946             return -EINVAL;
947         }
948     }
949 
950     if (filename != NULL) {
951         pstrcpy(bs->filename, sizeof(bs->filename), filename);
952     } else {
953         bs->filename[0] = '\0';
954     }
955 
956     bs->drv = drv;
957     bs->opaque = g_malloc0(drv->instance_size);
958 
959     bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
960 
961     /* Open the image, either directly or using a protocol */
962     if (drv->bdrv_file_open) {
963         assert(file == NULL);
964         assert(!drv->bdrv_needs_filename || filename != NULL);
965         ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
966     } else {
967         if (file == NULL) {
968             error_setg(errp, "Can't use '%s' as a block driver for the "
969                        "protocol level", drv->format_name);
970             ret = -EINVAL;
971             goto free_and_fail;
972         }
973         bs->file = file;
974         ret = drv->bdrv_open(bs, options, open_flags, &local_err);
975     }
976 
977     if (ret < 0) {
978         if (local_err) {
979             error_propagate(errp, local_err);
980         } else if (bs->filename[0]) {
981             error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
982         } else {
983             error_setg_errno(errp, -ret, "Could not open image");
984         }
985         goto free_and_fail;
986     }
987 
988     ret = refresh_total_sectors(bs, bs->total_sectors);
989     if (ret < 0) {
990         error_setg_errno(errp, -ret, "Could not refresh total sector count");
991         goto free_and_fail;
992     }
993 
994     bdrv_refresh_limits(bs);
995     assert(bdrv_opt_mem_align(bs) != 0);
996     assert((bs->request_alignment != 0) || bs->sg);
997     return 0;
998 
999 free_and_fail:
1000     bs->file = NULL;
1001     g_free(bs->opaque);
1002     bs->opaque = NULL;
1003     bs->drv = NULL;
1004     return ret;
1005 }
1006 
1007 /*
1008  * Opens a file using a protocol (file, host_device, nbd, ...)
1009  *
1010  * options is an indirect pointer to a QDict of options to pass to the block
1011  * drivers, or pointer to NULL for an empty set of options. If this function
1012  * takes ownership of the QDict reference, it will set *options to NULL;
1013  * otherwise, it will contain unused/unrecognized options after this function
1014  * returns. Then, the caller is responsible for freeing it. If it intends to
1015  * reuse the QDict, QINCREF() should be called beforehand.
1016  */
1017 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
1018                           QDict **options, int flags, Error **errp)
1019 {
1020     BlockDriver *drv;
1021     const char *drvname;
1022     bool parse_filename = false;
1023     Error *local_err = NULL;
1024     int ret;
1025 
1026     /* Fetch the file name from the options QDict if necessary */
1027     if (!filename) {
1028         filename = qdict_get_try_str(*options, "filename");
1029     } else if (filename && !qdict_haskey(*options, "filename")) {
1030         qdict_put(*options, "filename", qstring_from_str(filename));
1031         parse_filename = true;
1032     } else {
1033         error_setg(errp, "Can't specify 'file' and 'filename' options at the "
1034                    "same time");
1035         ret = -EINVAL;
1036         goto fail;
1037     }
1038 
1039     /* Find the right block driver */
1040     drvname = qdict_get_try_str(*options, "driver");
1041     if (drvname) {
1042         drv = bdrv_find_format(drvname);
1043         if (!drv) {
1044             error_setg(errp, "Unknown driver '%s'", drvname);
1045         }
1046         qdict_del(*options, "driver");
1047     } else if (filename) {
1048         drv = bdrv_find_protocol(filename, parse_filename);
1049         if (!drv) {
1050             error_setg(errp, "Unknown protocol");
1051         }
1052     } else {
1053         error_setg(errp, "Must specify either driver or file");
1054         drv = NULL;
1055     }
1056 
1057     if (!drv) {
1058         /* errp has been set already */
1059         ret = -ENOENT;
1060         goto fail;
1061     }
1062 
1063     /* Parse the filename and open it */
1064     if (drv->bdrv_parse_filename && parse_filename) {
1065         drv->bdrv_parse_filename(filename, *options, &local_err);
1066         if (local_err) {
1067             error_propagate(errp, local_err);
1068             ret = -EINVAL;
1069             goto fail;
1070         }
1071 
1072         if (!drv->bdrv_needs_filename) {
1073             qdict_del(*options, "filename");
1074         } else {
1075             filename = qdict_get_str(*options, "filename");
1076         }
1077     }
1078 
1079     if (!drv->bdrv_file_open) {
1080         ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1081         *options = NULL;
1082     } else {
1083         ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1084     }
1085     if (ret < 0) {
1086         error_propagate(errp, local_err);
1087         goto fail;
1088     }
1089 
1090     bs->growable = 1;
1091     return 0;
1092 
1093 fail:
1094     return ret;
1095 }
1096 
1097 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1098 {
1099 
1100     if (bs->backing_hd) {
1101         assert(bs->backing_blocker);
1102         bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1103     } else if (backing_hd) {
1104         error_setg(&bs->backing_blocker,
1105                    "device is used as backing hd of '%s'",
1106                    bs->device_name);
1107     }
1108 
1109     bs->backing_hd = backing_hd;
1110     if (!backing_hd) {
1111         error_free(bs->backing_blocker);
1112         bs->backing_blocker = NULL;
1113         goto out;
1114     }
1115     bs->open_flags &= ~BDRV_O_NO_BACKING;
1116     pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1117     pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1118             backing_hd->drv ? backing_hd->drv->format_name : "");
1119 
1120     bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1121     /* Otherwise we won't be able to commit due to check in bdrv_commit */
1122     bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1123                     bs->backing_blocker);
1124 out:
1125     bdrv_refresh_limits(bs);
1126 }
1127 
1128 /*
1129  * Opens the backing file for a BlockDriverState if not yet open
1130  *
1131  * options is a QDict of options to pass to the block drivers, or NULL for an
1132  * empty set of options. The reference to the QDict is transferred to this
1133  * function (even on failure), so if the caller intends to reuse the dictionary,
1134  * it needs to use QINCREF() before calling bdrv_file_open.
1135  */
1136 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1137 {
1138     char *backing_filename = g_malloc0(PATH_MAX);
1139     int ret = 0;
1140     BlockDriver *back_drv = NULL;
1141     BlockDriverState *backing_hd;
1142     Error *local_err = NULL;
1143 
1144     if (bs->backing_hd != NULL) {
1145         QDECREF(options);
1146         goto free_exit;
1147     }
1148 
1149     /* NULL means an empty set of options */
1150     if (options == NULL) {
1151         options = qdict_new();
1152     }
1153 
1154     bs->open_flags &= ~BDRV_O_NO_BACKING;
1155     if (qdict_haskey(options, "file.filename")) {
1156         backing_filename[0] = '\0';
1157     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1158         QDECREF(options);
1159         goto free_exit;
1160     } else {
1161         bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1162     }
1163 
1164     backing_hd = bdrv_new("", errp);
1165 
1166     if (bs->backing_format[0] != '\0') {
1167         back_drv = bdrv_find_format(bs->backing_format);
1168     }
1169 
1170     assert(bs->backing_hd == NULL);
1171     ret = bdrv_open(&backing_hd,
1172                     *backing_filename ? backing_filename : NULL, NULL, options,
1173                     bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1174     if (ret < 0) {
1175         bdrv_unref(backing_hd);
1176         backing_hd = NULL;
1177         bs->open_flags |= BDRV_O_NO_BACKING;
1178         error_setg(errp, "Could not open backing file: %s",
1179                    error_get_pretty(local_err));
1180         error_free(local_err);
1181         goto free_exit;
1182     }
1183     bdrv_set_backing_hd(bs, backing_hd);
1184 
1185 free_exit:
1186     g_free(backing_filename);
1187     return ret;
1188 }
1189 
1190 /*
1191  * Opens a disk image whose options are given as BlockdevRef in another block
1192  * device's options.
1193  *
1194  * If allow_none is true, no image will be opened if filename is false and no
1195  * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1196  *
1197  * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1198  * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1199  * itself, all options starting with "${bdref_key}." are considered part of the
1200  * BlockdevRef.
1201  *
1202  * The BlockdevRef will be removed from the options QDict.
1203  *
1204  * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1205  */
1206 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1207                     QDict *options, const char *bdref_key, int flags,
1208                     bool allow_none, Error **errp)
1209 {
1210     QDict *image_options;
1211     int ret;
1212     char *bdref_key_dot;
1213     const char *reference;
1214 
1215     assert(pbs);
1216     assert(*pbs == NULL);
1217 
1218     bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1219     qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1220     g_free(bdref_key_dot);
1221 
1222     reference = qdict_get_try_str(options, bdref_key);
1223     if (!filename && !reference && !qdict_size(image_options)) {
1224         if (allow_none) {
1225             ret = 0;
1226         } else {
1227             error_setg(errp, "A block device must be specified for \"%s\"",
1228                        bdref_key);
1229             ret = -EINVAL;
1230         }
1231         QDECREF(image_options);
1232         goto done;
1233     }
1234 
1235     ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1236 
1237 done:
1238     qdict_del(options, bdref_key);
1239     return ret;
1240 }
1241 
1242 void bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1243 {
1244     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1245     char *tmp_filename = g_malloc0(PATH_MAX + 1);
1246     int64_t total_size;
1247     BlockDriver *bdrv_qcow2;
1248     QEMUOptionParameter *create_options;
1249     QDict *snapshot_options;
1250     BlockDriverState *bs_snapshot;
1251     Error *local_err;
1252     int ret;
1253 
1254     /* if snapshot, we create a temporary backing file and open it
1255        instead of opening 'filename' directly */
1256 
1257     /* Get the required size from the image */
1258     total_size = bdrv_getlength(bs);
1259     if (total_size < 0) {
1260         error_setg_errno(errp, -total_size, "Could not get image size");
1261         goto out;
1262     }
1263     total_size &= BDRV_SECTOR_MASK;
1264 
1265     /* Create the temporary image */
1266     ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1267     if (ret < 0) {
1268         error_setg_errno(errp, -ret, "Could not get temporary filename");
1269         goto out;
1270     }
1271 
1272     bdrv_qcow2 = bdrv_find_format("qcow2");
1273     create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1274                                              NULL);
1275 
1276     set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1277 
1278     ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1279     free_option_parameters(create_options);
1280     if (ret < 0) {
1281         error_setg_errno(errp, -ret, "Could not create temporary overlay "
1282                          "'%s': %s", tmp_filename,
1283                          error_get_pretty(local_err));
1284         error_free(local_err);
1285         goto out;
1286     }
1287 
1288     /* Prepare a new options QDict for the temporary file */
1289     snapshot_options = qdict_new();
1290     qdict_put(snapshot_options, "file.driver",
1291               qstring_from_str("file"));
1292     qdict_put(snapshot_options, "file.filename",
1293               qstring_from_str(tmp_filename));
1294 
1295     bs_snapshot = bdrv_new("", &error_abort);
1296 
1297     ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1298                     flags, bdrv_qcow2, &local_err);
1299     if (ret < 0) {
1300         error_propagate(errp, local_err);
1301         goto out;
1302     }
1303 
1304     bdrv_append(bs_snapshot, bs);
1305 
1306 out:
1307     g_free(tmp_filename);
1308 }
1309 
1310 static QDict *parse_json_filename(const char *filename, Error **errp)
1311 {
1312     QObject *options_obj;
1313     QDict *options;
1314     int ret;
1315 
1316     ret = strstart(filename, "json:", &filename);
1317     assert(ret);
1318 
1319     options_obj = qobject_from_json(filename);
1320     if (!options_obj) {
1321         error_setg(errp, "Could not parse the JSON options");
1322         return NULL;
1323     }
1324 
1325     if (qobject_type(options_obj) != QTYPE_QDICT) {
1326         qobject_decref(options_obj);
1327         error_setg(errp, "Invalid JSON object given");
1328         return NULL;
1329     }
1330 
1331     options = qobject_to_qdict(options_obj);
1332     qdict_flatten(options);
1333 
1334     return options;
1335 }
1336 
1337 /*
1338  * Opens a disk image (raw, qcow2, vmdk, ...)
1339  *
1340  * options is a QDict of options to pass to the block drivers, or NULL for an
1341  * empty set of options. The reference to the QDict belongs to the block layer
1342  * after the call (even on failure), so if the caller intends to reuse the
1343  * dictionary, it needs to use QINCREF() before calling bdrv_open.
1344  *
1345  * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1346  * If it is not NULL, the referenced BDS will be reused.
1347  *
1348  * The reference parameter may be used to specify an existing block device which
1349  * should be opened. If specified, neither options nor a filename may be given,
1350  * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1351  */
1352 int bdrv_open(BlockDriverState **pbs, const char *filename,
1353               const char *reference, QDict *options, int flags,
1354               BlockDriver *drv, Error **errp)
1355 {
1356     int ret;
1357     BlockDriverState *file = NULL, *bs;
1358     const char *drvname;
1359     Error *local_err = NULL;
1360     int snapshot_flags = 0;
1361 
1362     assert(pbs);
1363 
1364     if (reference) {
1365         bool options_non_empty = options ? qdict_size(options) : false;
1366         QDECREF(options);
1367 
1368         if (*pbs) {
1369             error_setg(errp, "Cannot reuse an existing BDS when referencing "
1370                        "another block device");
1371             return -EINVAL;
1372         }
1373 
1374         if (filename || options_non_empty) {
1375             error_setg(errp, "Cannot reference an existing block device with "
1376                        "additional options or a new filename");
1377             return -EINVAL;
1378         }
1379 
1380         bs = bdrv_lookup_bs(reference, reference, errp);
1381         if (!bs) {
1382             return -ENODEV;
1383         }
1384         bdrv_ref(bs);
1385         *pbs = bs;
1386         return 0;
1387     }
1388 
1389     if (*pbs) {
1390         bs = *pbs;
1391     } else {
1392         bs = bdrv_new("", &error_abort);
1393     }
1394 
1395     /* NULL means an empty set of options */
1396     if (options == NULL) {
1397         options = qdict_new();
1398     }
1399 
1400     if (filename && g_str_has_prefix(filename, "json:")) {
1401         QDict *json_options = parse_json_filename(filename, &local_err);
1402         if (local_err) {
1403             ret = -EINVAL;
1404             goto fail;
1405         }
1406 
1407         /* Options given in the filename have lower priority than options
1408          * specified directly */
1409         qdict_join(options, json_options, false);
1410         QDECREF(json_options);
1411         filename = NULL;
1412     }
1413 
1414     bs->options = options;
1415     options = qdict_clone_shallow(options);
1416 
1417     if (flags & BDRV_O_PROTOCOL) {
1418         assert(!drv);
1419         ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1420                              &local_err);
1421         if (!ret) {
1422             drv = bs->drv;
1423             goto done;
1424         } else if (bs->drv) {
1425             goto close_and_fail;
1426         } else {
1427             goto fail;
1428         }
1429     }
1430 
1431     /* Open image file without format layer */
1432     if (flags & BDRV_O_RDWR) {
1433         flags |= BDRV_O_ALLOW_RDWR;
1434     }
1435     if (flags & BDRV_O_SNAPSHOT) {
1436         snapshot_flags = bdrv_temp_snapshot_flags(flags);
1437         flags = bdrv_backing_flags(flags);
1438     }
1439 
1440     assert(file == NULL);
1441     ret = bdrv_open_image(&file, filename, options, "file",
1442                           bdrv_inherited_flags(flags),
1443                           true, &local_err);
1444     if (ret < 0) {
1445         goto fail;
1446     }
1447 
1448     /* Find the right image format driver */
1449     drvname = qdict_get_try_str(options, "driver");
1450     if (drvname) {
1451         drv = bdrv_find_format(drvname);
1452         qdict_del(options, "driver");
1453         if (!drv) {
1454             error_setg(errp, "Invalid driver: '%s'", drvname);
1455             ret = -EINVAL;
1456             goto fail;
1457         }
1458     }
1459 
1460     if (!drv) {
1461         if (file) {
1462             ret = find_image_format(file, filename, &drv, &local_err);
1463         } else {
1464             error_setg(errp, "Must specify either driver or file");
1465             ret = -EINVAL;
1466             goto fail;
1467         }
1468     }
1469 
1470     if (!drv) {
1471         goto fail;
1472     }
1473 
1474     /* Open the image */
1475     ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1476     if (ret < 0) {
1477         goto fail;
1478     }
1479 
1480     if (file && (bs->file != file)) {
1481         bdrv_unref(file);
1482         file = NULL;
1483     }
1484 
1485     /* If there is a backing file, use it */
1486     if ((flags & BDRV_O_NO_BACKING) == 0) {
1487         QDict *backing_options;
1488 
1489         qdict_extract_subqdict(options, &backing_options, "backing.");
1490         ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1491         if (ret < 0) {
1492             goto close_and_fail;
1493         }
1494     }
1495 
1496     /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1497      * temporary snapshot afterwards. */
1498     if (snapshot_flags) {
1499         bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1500         if (local_err) {
1501             error_propagate(errp, local_err);
1502             goto close_and_fail;
1503         }
1504     }
1505 
1506 
1507 done:
1508     /* Check if any unknown options were used */
1509     if (options && (qdict_size(options) != 0)) {
1510         const QDictEntry *entry = qdict_first(options);
1511         if (flags & BDRV_O_PROTOCOL) {
1512             error_setg(errp, "Block protocol '%s' doesn't support the option "
1513                        "'%s'", drv->format_name, entry->key);
1514         } else {
1515             error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1516                        "support the option '%s'", drv->format_name,
1517                        bs->device_name, entry->key);
1518         }
1519 
1520         ret = -EINVAL;
1521         goto close_and_fail;
1522     }
1523 
1524     if (!bdrv_key_required(bs)) {
1525         bdrv_dev_change_media_cb(bs, true);
1526     } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1527                && !runstate_check(RUN_STATE_INMIGRATE)
1528                && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1529         error_setg(errp,
1530                    "Guest must be stopped for opening of encrypted image");
1531         ret = -EBUSY;
1532         goto close_and_fail;
1533     }
1534 
1535     QDECREF(options);
1536     *pbs = bs;
1537     return 0;
1538 
1539 fail:
1540     if (file != NULL) {
1541         bdrv_unref(file);
1542     }
1543     QDECREF(bs->options);
1544     QDECREF(options);
1545     bs->options = NULL;
1546     if (!*pbs) {
1547         /* If *pbs is NULL, a new BDS has been created in this function and
1548            needs to be freed now. Otherwise, it does not need to be closed,
1549            since it has not really been opened yet. */
1550         bdrv_unref(bs);
1551     }
1552     if (local_err) {
1553         error_propagate(errp, local_err);
1554     }
1555     return ret;
1556 
1557 close_and_fail:
1558     /* See fail path, but now the BDS has to be always closed */
1559     if (*pbs) {
1560         bdrv_close(bs);
1561     } else {
1562         bdrv_unref(bs);
1563     }
1564     QDECREF(options);
1565     if (local_err) {
1566         error_propagate(errp, local_err);
1567     }
1568     return ret;
1569 }
1570 
1571 typedef struct BlockReopenQueueEntry {
1572      bool prepared;
1573      BDRVReopenState state;
1574      QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1575 } BlockReopenQueueEntry;
1576 
1577 /*
1578  * Adds a BlockDriverState to a simple queue for an atomic, transactional
1579  * reopen of multiple devices.
1580  *
1581  * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1582  * already performed, or alternatively may be NULL a new BlockReopenQueue will
1583  * be created and initialized. This newly created BlockReopenQueue should be
1584  * passed back in for subsequent calls that are intended to be of the same
1585  * atomic 'set'.
1586  *
1587  * bs is the BlockDriverState to add to the reopen queue.
1588  *
1589  * flags contains the open flags for the associated bs
1590  *
1591  * returns a pointer to bs_queue, which is either the newly allocated
1592  * bs_queue, or the existing bs_queue being used.
1593  *
1594  */
1595 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1596                                     BlockDriverState *bs, int flags)
1597 {
1598     assert(bs != NULL);
1599 
1600     BlockReopenQueueEntry *bs_entry;
1601     if (bs_queue == NULL) {
1602         bs_queue = g_new0(BlockReopenQueue, 1);
1603         QSIMPLEQ_INIT(bs_queue);
1604     }
1605 
1606     /* bdrv_open() masks this flag out */
1607     flags &= ~BDRV_O_PROTOCOL;
1608 
1609     if (bs->file) {
1610         bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1611     }
1612 
1613     bs_entry = g_new0(BlockReopenQueueEntry, 1);
1614     QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1615 
1616     bs_entry->state.bs = bs;
1617     bs_entry->state.flags = flags;
1618 
1619     return bs_queue;
1620 }
1621 
1622 /*
1623  * Reopen multiple BlockDriverStates atomically & transactionally.
1624  *
1625  * The queue passed in (bs_queue) must have been built up previous
1626  * via bdrv_reopen_queue().
1627  *
1628  * Reopens all BDS specified in the queue, with the appropriate
1629  * flags.  All devices are prepared for reopen, and failure of any
1630  * device will cause all device changes to be abandonded, and intermediate
1631  * data cleaned up.
1632  *
1633  * If all devices prepare successfully, then the changes are committed
1634  * to all devices.
1635  *
1636  */
1637 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1638 {
1639     int ret = -1;
1640     BlockReopenQueueEntry *bs_entry, *next;
1641     Error *local_err = NULL;
1642 
1643     assert(bs_queue != NULL);
1644 
1645     bdrv_drain_all();
1646 
1647     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1648         if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1649             error_propagate(errp, local_err);
1650             goto cleanup;
1651         }
1652         bs_entry->prepared = true;
1653     }
1654 
1655     /* If we reach this point, we have success and just need to apply the
1656      * changes
1657      */
1658     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1659         bdrv_reopen_commit(&bs_entry->state);
1660     }
1661 
1662     ret = 0;
1663 
1664 cleanup:
1665     QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1666         if (ret && bs_entry->prepared) {
1667             bdrv_reopen_abort(&bs_entry->state);
1668         }
1669         g_free(bs_entry);
1670     }
1671     g_free(bs_queue);
1672     return ret;
1673 }
1674 
1675 
1676 /* Reopen a single BlockDriverState with the specified flags. */
1677 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1678 {
1679     int ret = -1;
1680     Error *local_err = NULL;
1681     BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1682 
1683     ret = bdrv_reopen_multiple(queue, &local_err);
1684     if (local_err != NULL) {
1685         error_propagate(errp, local_err);
1686     }
1687     return ret;
1688 }
1689 
1690 
1691 /*
1692  * Prepares a BlockDriverState for reopen. All changes are staged in the
1693  * 'opaque' field of the BDRVReopenState, which is used and allocated by
1694  * the block driver layer .bdrv_reopen_prepare()
1695  *
1696  * bs is the BlockDriverState to reopen
1697  * flags are the new open flags
1698  * queue is the reopen queue
1699  *
1700  * Returns 0 on success, non-zero on error.  On error errp will be set
1701  * as well.
1702  *
1703  * On failure, bdrv_reopen_abort() will be called to clean up any data.
1704  * It is the responsibility of the caller to then call the abort() or
1705  * commit() for any other BDS that have been left in a prepare() state
1706  *
1707  */
1708 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1709                         Error **errp)
1710 {
1711     int ret = -1;
1712     Error *local_err = NULL;
1713     BlockDriver *drv;
1714 
1715     assert(reopen_state != NULL);
1716     assert(reopen_state->bs->drv != NULL);
1717     drv = reopen_state->bs->drv;
1718 
1719     /* if we are to stay read-only, do not allow permission change
1720      * to r/w */
1721     if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1722         reopen_state->flags & BDRV_O_RDWR) {
1723         error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1724                   reopen_state->bs->device_name);
1725         goto error;
1726     }
1727 
1728 
1729     ret = bdrv_flush(reopen_state->bs);
1730     if (ret) {
1731         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1732                   strerror(-ret));
1733         goto error;
1734     }
1735 
1736     if (drv->bdrv_reopen_prepare) {
1737         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1738         if (ret) {
1739             if (local_err != NULL) {
1740                 error_propagate(errp, local_err);
1741             } else {
1742                 error_setg(errp, "failed while preparing to reopen image '%s'",
1743                            reopen_state->bs->filename);
1744             }
1745             goto error;
1746         }
1747     } else {
1748         /* It is currently mandatory to have a bdrv_reopen_prepare()
1749          * handler for each supported drv. */
1750         error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1751                   drv->format_name, reopen_state->bs->device_name,
1752                  "reopening of file");
1753         ret = -1;
1754         goto error;
1755     }
1756 
1757     ret = 0;
1758 
1759 error:
1760     return ret;
1761 }
1762 
1763 /*
1764  * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1765  * makes them final by swapping the staging BlockDriverState contents into
1766  * the active BlockDriverState contents.
1767  */
1768 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1769 {
1770     BlockDriver *drv;
1771 
1772     assert(reopen_state != NULL);
1773     drv = reopen_state->bs->drv;
1774     assert(drv != NULL);
1775 
1776     /* If there are any driver level actions to take */
1777     if (drv->bdrv_reopen_commit) {
1778         drv->bdrv_reopen_commit(reopen_state);
1779     }
1780 
1781     /* set BDS specific flags now */
1782     reopen_state->bs->open_flags         = reopen_state->flags;
1783     reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1784                                               BDRV_O_CACHE_WB);
1785     reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1786 
1787     bdrv_refresh_limits(reopen_state->bs);
1788 }
1789 
1790 /*
1791  * Abort the reopen, and delete and free the staged changes in
1792  * reopen_state
1793  */
1794 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1795 {
1796     BlockDriver *drv;
1797 
1798     assert(reopen_state != NULL);
1799     drv = reopen_state->bs->drv;
1800     assert(drv != NULL);
1801 
1802     if (drv->bdrv_reopen_abort) {
1803         drv->bdrv_reopen_abort(reopen_state);
1804     }
1805 }
1806 
1807 
1808 void bdrv_close(BlockDriverState *bs)
1809 {
1810     if (bs->job) {
1811         block_job_cancel_sync(bs->job);
1812     }
1813     bdrv_drain_all(); /* complete I/O */
1814     bdrv_flush(bs);
1815     bdrv_drain_all(); /* in case flush left pending I/O */
1816     notifier_list_notify(&bs->close_notifiers, bs);
1817 
1818     if (bs->drv) {
1819         if (bs->backing_hd) {
1820             BlockDriverState *backing_hd = bs->backing_hd;
1821             bdrv_set_backing_hd(bs, NULL);
1822             bdrv_unref(backing_hd);
1823         }
1824         bs->drv->bdrv_close(bs);
1825         g_free(bs->opaque);
1826         bs->opaque = NULL;
1827         bs->drv = NULL;
1828         bs->copy_on_read = 0;
1829         bs->backing_file[0] = '\0';
1830         bs->backing_format[0] = '\0';
1831         bs->total_sectors = 0;
1832         bs->encrypted = 0;
1833         bs->valid_key = 0;
1834         bs->sg = 0;
1835         bs->growable = 0;
1836         bs->zero_beyond_eof = false;
1837         QDECREF(bs->options);
1838         bs->options = NULL;
1839 
1840         if (bs->file != NULL) {
1841             bdrv_unref(bs->file);
1842             bs->file = NULL;
1843         }
1844     }
1845 
1846     bdrv_dev_change_media_cb(bs, false);
1847 
1848     /*throttling disk I/O limits*/
1849     if (bs->io_limits_enabled) {
1850         bdrv_io_limits_disable(bs);
1851     }
1852 }
1853 
1854 void bdrv_close_all(void)
1855 {
1856     BlockDriverState *bs;
1857 
1858     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1859         bdrv_close(bs);
1860     }
1861 }
1862 
1863 /* Check if any requests are in-flight (including throttled requests) */
1864 static bool bdrv_requests_pending(BlockDriverState *bs)
1865 {
1866     if (!QLIST_EMPTY(&bs->tracked_requests)) {
1867         return true;
1868     }
1869     if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1870         return true;
1871     }
1872     if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1873         return true;
1874     }
1875     if (bs->file && bdrv_requests_pending(bs->file)) {
1876         return true;
1877     }
1878     if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1879         return true;
1880     }
1881     return false;
1882 }
1883 
1884 static bool bdrv_requests_pending_all(void)
1885 {
1886     BlockDriverState *bs;
1887     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1888         if (bdrv_requests_pending(bs)) {
1889             return true;
1890         }
1891     }
1892     return false;
1893 }
1894 
1895 /*
1896  * Wait for pending requests to complete across all BlockDriverStates
1897  *
1898  * This function does not flush data to disk, use bdrv_flush_all() for that
1899  * after calling this function.
1900  *
1901  * Note that completion of an asynchronous I/O operation can trigger any
1902  * number of other I/O operations on other devices---for example a coroutine
1903  * can be arbitrarily complex and a constant flow of I/O can come until the
1904  * coroutine is complete.  Because of this, it is not possible to have a
1905  * function to drain a single device's I/O queue.
1906  */
1907 void bdrv_drain_all(void)
1908 {
1909     /* Always run first iteration so any pending completion BHs run */
1910     bool busy = true;
1911     BlockDriverState *bs;
1912 
1913     while (busy) {
1914         QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1915             bdrv_start_throttled_reqs(bs);
1916         }
1917 
1918         busy = bdrv_requests_pending_all();
1919         busy |= aio_poll(qemu_get_aio_context(), busy);
1920     }
1921 }
1922 
1923 /* make a BlockDriverState anonymous by removing from bdrv_state and
1924  * graph_bdrv_state list.
1925    Also, NULL terminate the device_name to prevent double remove */
1926 void bdrv_make_anon(BlockDriverState *bs)
1927 {
1928     if (bs->device_name[0] != '\0') {
1929         QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1930     }
1931     bs->device_name[0] = '\0';
1932     if (bs->node_name[0] != '\0') {
1933         QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1934     }
1935     bs->node_name[0] = '\0';
1936 }
1937 
1938 static void bdrv_rebind(BlockDriverState *bs)
1939 {
1940     if (bs->drv && bs->drv->bdrv_rebind) {
1941         bs->drv->bdrv_rebind(bs);
1942     }
1943 }
1944 
1945 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1946                                      BlockDriverState *bs_src)
1947 {
1948     /* move some fields that need to stay attached to the device */
1949 
1950     /* dev info */
1951     bs_dest->dev_ops            = bs_src->dev_ops;
1952     bs_dest->dev_opaque         = bs_src->dev_opaque;
1953     bs_dest->dev                = bs_src->dev;
1954     bs_dest->guest_block_size   = bs_src->guest_block_size;
1955     bs_dest->copy_on_read       = bs_src->copy_on_read;
1956 
1957     bs_dest->enable_write_cache = bs_src->enable_write_cache;
1958 
1959     /* i/o throttled req */
1960     memcpy(&bs_dest->throttle_state,
1961            &bs_src->throttle_state,
1962            sizeof(ThrottleState));
1963     bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
1964     bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
1965     bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
1966 
1967     /* r/w error */
1968     bs_dest->on_read_error      = bs_src->on_read_error;
1969     bs_dest->on_write_error     = bs_src->on_write_error;
1970 
1971     /* i/o status */
1972     bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
1973     bs_dest->iostatus           = bs_src->iostatus;
1974 
1975     /* dirty bitmap */
1976     bs_dest->dirty_bitmaps      = bs_src->dirty_bitmaps;
1977 
1978     /* reference count */
1979     bs_dest->refcnt             = bs_src->refcnt;
1980 
1981     /* job */
1982     bs_dest->job                = bs_src->job;
1983 
1984     /* keep the same entry in bdrv_states */
1985     pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1986             bs_src->device_name);
1987     bs_dest->device_list = bs_src->device_list;
1988     memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1989            sizeof(bs_dest->op_blockers));
1990 }
1991 
1992 /*
1993  * Swap bs contents for two image chains while they are live,
1994  * while keeping required fields on the BlockDriverState that is
1995  * actually attached to a device.
1996  *
1997  * This will modify the BlockDriverState fields, and swap contents
1998  * between bs_new and bs_old. Both bs_new and bs_old are modified.
1999  *
2000  * bs_new is required to be anonymous.
2001  *
2002  * This function does not create any image files.
2003  */
2004 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2005 {
2006     BlockDriverState tmp;
2007 
2008     /* The code needs to swap the node_name but simply swapping node_list won't
2009      * work so first remove the nodes from the graph list, do the swap then
2010      * insert them back if needed.
2011      */
2012     if (bs_new->node_name[0] != '\0') {
2013         QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2014     }
2015     if (bs_old->node_name[0] != '\0') {
2016         QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2017     }
2018 
2019     /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2020     assert(bs_new->device_name[0] == '\0');
2021     assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2022     assert(bs_new->job == NULL);
2023     assert(bs_new->dev == NULL);
2024     assert(bs_new->io_limits_enabled == false);
2025     assert(!throttle_have_timer(&bs_new->throttle_state));
2026 
2027     tmp = *bs_new;
2028     *bs_new = *bs_old;
2029     *bs_old = tmp;
2030 
2031     /* there are some fields that should not be swapped, move them back */
2032     bdrv_move_feature_fields(&tmp, bs_old);
2033     bdrv_move_feature_fields(bs_old, bs_new);
2034     bdrv_move_feature_fields(bs_new, &tmp);
2035 
2036     /* bs_new shouldn't be in bdrv_states even after the swap!  */
2037     assert(bs_new->device_name[0] == '\0');
2038 
2039     /* Check a few fields that should remain attached to the device */
2040     assert(bs_new->dev == NULL);
2041     assert(bs_new->job == NULL);
2042     assert(bs_new->io_limits_enabled == false);
2043     assert(!throttle_have_timer(&bs_new->throttle_state));
2044 
2045     /* insert the nodes back into the graph node list if needed */
2046     if (bs_new->node_name[0] != '\0') {
2047         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2048     }
2049     if (bs_old->node_name[0] != '\0') {
2050         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2051     }
2052 
2053     bdrv_rebind(bs_new);
2054     bdrv_rebind(bs_old);
2055 }
2056 
2057 /*
2058  * Add new bs contents at the top of an image chain while the chain is
2059  * live, while keeping required fields on the top layer.
2060  *
2061  * This will modify the BlockDriverState fields, and swap contents
2062  * between bs_new and bs_top. Both bs_new and bs_top are modified.
2063  *
2064  * bs_new is required to be anonymous.
2065  *
2066  * This function does not create any image files.
2067  */
2068 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2069 {
2070     bdrv_swap(bs_new, bs_top);
2071 
2072     /* The contents of 'tmp' will become bs_top, as we are
2073      * swapping bs_new and bs_top contents. */
2074     bdrv_set_backing_hd(bs_top, bs_new);
2075 }
2076 
2077 static void bdrv_delete(BlockDriverState *bs)
2078 {
2079     assert(!bs->dev);
2080     assert(!bs->job);
2081     assert(bdrv_op_blocker_is_empty(bs));
2082     assert(!bs->refcnt);
2083     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2084 
2085     bdrv_close(bs);
2086 
2087     /* remove from list, if necessary */
2088     bdrv_make_anon(bs);
2089 
2090     g_free(bs);
2091 }
2092 
2093 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2094 /* TODO change to DeviceState *dev when all users are qdevified */
2095 {
2096     if (bs->dev) {
2097         return -EBUSY;
2098     }
2099     bs->dev = dev;
2100     bdrv_iostatus_reset(bs);
2101     return 0;
2102 }
2103 
2104 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2105 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2106 {
2107     if (bdrv_attach_dev(bs, dev) < 0) {
2108         abort();
2109     }
2110 }
2111 
2112 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2113 /* TODO change to DeviceState *dev when all users are qdevified */
2114 {
2115     assert(bs->dev == dev);
2116     bs->dev = NULL;
2117     bs->dev_ops = NULL;
2118     bs->dev_opaque = NULL;
2119     bs->guest_block_size = 512;
2120 }
2121 
2122 /* TODO change to return DeviceState * when all users are qdevified */
2123 void *bdrv_get_attached_dev(BlockDriverState *bs)
2124 {
2125     return bs->dev;
2126 }
2127 
2128 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2129                       void *opaque)
2130 {
2131     bs->dev_ops = ops;
2132     bs->dev_opaque = opaque;
2133 }
2134 
2135 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
2136                                enum MonitorEvent ev,
2137                                BlockErrorAction action, bool is_read)
2138 {
2139     QObject *data;
2140     const char *action_str;
2141 
2142     switch (action) {
2143     case BDRV_ACTION_REPORT:
2144         action_str = "report";
2145         break;
2146     case BDRV_ACTION_IGNORE:
2147         action_str = "ignore";
2148         break;
2149     case BDRV_ACTION_STOP:
2150         action_str = "stop";
2151         break;
2152     default:
2153         abort();
2154     }
2155 
2156     data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2157                               bdrv->device_name,
2158                               action_str,
2159                               is_read ? "read" : "write");
2160     monitor_protocol_event(ev, data);
2161 
2162     qobject_decref(data);
2163 }
2164 
2165 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2166 {
2167     QObject *data;
2168 
2169     data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2170                               bdrv_get_device_name(bs), ejected);
2171     monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2172 
2173     qobject_decref(data);
2174 }
2175 
2176 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2177 {
2178     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2179         bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2180         bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2181         if (tray_was_closed) {
2182             /* tray open */
2183             bdrv_emit_qmp_eject_event(bs, true);
2184         }
2185         if (load) {
2186             /* tray close */
2187             bdrv_emit_qmp_eject_event(bs, false);
2188         }
2189     }
2190 }
2191 
2192 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2193 {
2194     return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2195 }
2196 
2197 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2198 {
2199     if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2200         bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2201     }
2202 }
2203 
2204 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2205 {
2206     if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2207         return bs->dev_ops->is_tray_open(bs->dev_opaque);
2208     }
2209     return false;
2210 }
2211 
2212 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2213 {
2214     if (bs->dev_ops && bs->dev_ops->resize_cb) {
2215         bs->dev_ops->resize_cb(bs->dev_opaque);
2216     }
2217 }
2218 
2219 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2220 {
2221     if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2222         return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2223     }
2224     return false;
2225 }
2226 
2227 /*
2228  * Run consistency checks on an image
2229  *
2230  * Returns 0 if the check could be completed (it doesn't mean that the image is
2231  * free of errors) or -errno when an internal error occurred. The results of the
2232  * check are stored in res.
2233  */
2234 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2235 {
2236     if (bs->drv->bdrv_check == NULL) {
2237         return -ENOTSUP;
2238     }
2239 
2240     memset(res, 0, sizeof(*res));
2241     return bs->drv->bdrv_check(bs, res, fix);
2242 }
2243 
2244 #define COMMIT_BUF_SECTORS 2048
2245 
2246 /* commit COW file into the raw image */
2247 int bdrv_commit(BlockDriverState *bs)
2248 {
2249     BlockDriver *drv = bs->drv;
2250     int64_t sector, total_sectors, length, backing_length;
2251     int n, ro, open_flags;
2252     int ret = 0;
2253     uint8_t *buf = NULL;
2254     char filename[PATH_MAX];
2255 
2256     if (!drv)
2257         return -ENOMEDIUM;
2258 
2259     if (!bs->backing_hd) {
2260         return -ENOTSUP;
2261     }
2262 
2263     if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2264         bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2265         return -EBUSY;
2266     }
2267 
2268     ro = bs->backing_hd->read_only;
2269     /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2270     pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2271     open_flags =  bs->backing_hd->open_flags;
2272 
2273     if (ro) {
2274         if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2275             return -EACCES;
2276         }
2277     }
2278 
2279     length = bdrv_getlength(bs);
2280     if (length < 0) {
2281         ret = length;
2282         goto ro_cleanup;
2283     }
2284 
2285     backing_length = bdrv_getlength(bs->backing_hd);
2286     if (backing_length < 0) {
2287         ret = backing_length;
2288         goto ro_cleanup;
2289     }
2290 
2291     /* If our top snapshot is larger than the backing file image,
2292      * grow the backing file image if possible.  If not possible,
2293      * we must return an error */
2294     if (length > backing_length) {
2295         ret = bdrv_truncate(bs->backing_hd, length);
2296         if (ret < 0) {
2297             goto ro_cleanup;
2298         }
2299     }
2300 
2301     total_sectors = length >> BDRV_SECTOR_BITS;
2302     buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2303 
2304     for (sector = 0; sector < total_sectors; sector += n) {
2305         ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2306         if (ret < 0) {
2307             goto ro_cleanup;
2308         }
2309         if (ret) {
2310             ret = bdrv_read(bs, sector, buf, n);
2311             if (ret < 0) {
2312                 goto ro_cleanup;
2313             }
2314 
2315             ret = bdrv_write(bs->backing_hd, sector, buf, n);
2316             if (ret < 0) {
2317                 goto ro_cleanup;
2318             }
2319         }
2320     }
2321 
2322     if (drv->bdrv_make_empty) {
2323         ret = drv->bdrv_make_empty(bs);
2324         if (ret < 0) {
2325             goto ro_cleanup;
2326         }
2327         bdrv_flush(bs);
2328     }
2329 
2330     /*
2331      * Make sure all data we wrote to the backing device is actually
2332      * stable on disk.
2333      */
2334     if (bs->backing_hd) {
2335         bdrv_flush(bs->backing_hd);
2336     }
2337 
2338     ret = 0;
2339 ro_cleanup:
2340     g_free(buf);
2341 
2342     if (ro) {
2343         /* ignoring error return here */
2344         bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2345     }
2346 
2347     return ret;
2348 }
2349 
2350 int bdrv_commit_all(void)
2351 {
2352     BlockDriverState *bs;
2353 
2354     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2355         if (bs->drv && bs->backing_hd) {
2356             int ret = bdrv_commit(bs);
2357             if (ret < 0) {
2358                 return ret;
2359             }
2360         }
2361     }
2362     return 0;
2363 }
2364 
2365 /**
2366  * Remove an active request from the tracked requests list
2367  *
2368  * This function should be called when a tracked request is completing.
2369  */
2370 static void tracked_request_end(BdrvTrackedRequest *req)
2371 {
2372     if (req->serialising) {
2373         req->bs->serialising_in_flight--;
2374     }
2375 
2376     QLIST_REMOVE(req, list);
2377     qemu_co_queue_restart_all(&req->wait_queue);
2378 }
2379 
2380 /**
2381  * Add an active request to the tracked requests list
2382  */
2383 static void tracked_request_begin(BdrvTrackedRequest *req,
2384                                   BlockDriverState *bs,
2385                                   int64_t offset,
2386                                   unsigned int bytes, bool is_write)
2387 {
2388     *req = (BdrvTrackedRequest){
2389         .bs = bs,
2390         .offset         = offset,
2391         .bytes          = bytes,
2392         .is_write       = is_write,
2393         .co             = qemu_coroutine_self(),
2394         .serialising    = false,
2395         .overlap_offset = offset,
2396         .overlap_bytes  = bytes,
2397     };
2398 
2399     qemu_co_queue_init(&req->wait_queue);
2400 
2401     QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2402 }
2403 
2404 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2405 {
2406     int64_t overlap_offset = req->offset & ~(align - 1);
2407     unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2408                                - overlap_offset;
2409 
2410     if (!req->serialising) {
2411         req->bs->serialising_in_flight++;
2412         req->serialising = true;
2413     }
2414 
2415     req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2416     req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2417 }
2418 
2419 /**
2420  * Round a region to cluster boundaries
2421  */
2422 void bdrv_round_to_clusters(BlockDriverState *bs,
2423                             int64_t sector_num, int nb_sectors,
2424                             int64_t *cluster_sector_num,
2425                             int *cluster_nb_sectors)
2426 {
2427     BlockDriverInfo bdi;
2428 
2429     if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2430         *cluster_sector_num = sector_num;
2431         *cluster_nb_sectors = nb_sectors;
2432     } else {
2433         int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2434         *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2435         *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2436                                             nb_sectors, c);
2437     }
2438 }
2439 
2440 static int bdrv_get_cluster_size(BlockDriverState *bs)
2441 {
2442     BlockDriverInfo bdi;
2443     int ret;
2444 
2445     ret = bdrv_get_info(bs, &bdi);
2446     if (ret < 0 || bdi.cluster_size == 0) {
2447         return bs->request_alignment;
2448     } else {
2449         return bdi.cluster_size;
2450     }
2451 }
2452 
2453 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2454                                      int64_t offset, unsigned int bytes)
2455 {
2456     /*        aaaa   bbbb */
2457     if (offset >= req->overlap_offset + req->overlap_bytes) {
2458         return false;
2459     }
2460     /* bbbb   aaaa        */
2461     if (req->overlap_offset >= offset + bytes) {
2462         return false;
2463     }
2464     return true;
2465 }
2466 
2467 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2468 {
2469     BlockDriverState *bs = self->bs;
2470     BdrvTrackedRequest *req;
2471     bool retry;
2472     bool waited = false;
2473 
2474     if (!bs->serialising_in_flight) {
2475         return false;
2476     }
2477 
2478     do {
2479         retry = false;
2480         QLIST_FOREACH(req, &bs->tracked_requests, list) {
2481             if (req == self || (!req->serialising && !self->serialising)) {
2482                 continue;
2483             }
2484             if (tracked_request_overlaps(req, self->overlap_offset,
2485                                          self->overlap_bytes))
2486             {
2487                 /* Hitting this means there was a reentrant request, for
2488                  * example, a block driver issuing nested requests.  This must
2489                  * never happen since it means deadlock.
2490                  */
2491                 assert(qemu_coroutine_self() != req->co);
2492 
2493                 /* If the request is already (indirectly) waiting for us, or
2494                  * will wait for us as soon as it wakes up, then just go on
2495                  * (instead of producing a deadlock in the former case). */
2496                 if (!req->waiting_for) {
2497                     self->waiting_for = req;
2498                     qemu_co_queue_wait(&req->wait_queue);
2499                     self->waiting_for = NULL;
2500                     retry = true;
2501                     waited = true;
2502                     break;
2503                 }
2504             }
2505         }
2506     } while (retry);
2507 
2508     return waited;
2509 }
2510 
2511 /*
2512  * Return values:
2513  * 0        - success
2514  * -EINVAL  - backing format specified, but no file
2515  * -ENOSPC  - can't update the backing file because no space is left in the
2516  *            image file header
2517  * -ENOTSUP - format driver doesn't support changing the backing file
2518  */
2519 int bdrv_change_backing_file(BlockDriverState *bs,
2520     const char *backing_file, const char *backing_fmt)
2521 {
2522     BlockDriver *drv = bs->drv;
2523     int ret;
2524 
2525     /* Backing file format doesn't make sense without a backing file */
2526     if (backing_fmt && !backing_file) {
2527         return -EINVAL;
2528     }
2529 
2530     if (drv->bdrv_change_backing_file != NULL) {
2531         ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2532     } else {
2533         ret = -ENOTSUP;
2534     }
2535 
2536     if (ret == 0) {
2537         pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2538         pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2539     }
2540     return ret;
2541 }
2542 
2543 /*
2544  * Finds the image layer in the chain that has 'bs' as its backing file.
2545  *
2546  * active is the current topmost image.
2547  *
2548  * Returns NULL if bs is not found in active's image chain,
2549  * or if active == bs.
2550  */
2551 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2552                                     BlockDriverState *bs)
2553 {
2554     BlockDriverState *overlay = NULL;
2555     BlockDriverState *intermediate;
2556 
2557     assert(active != NULL);
2558     assert(bs != NULL);
2559 
2560     /* if bs is the same as active, then by definition it has no overlay
2561      */
2562     if (active == bs) {
2563         return NULL;
2564     }
2565 
2566     intermediate = active;
2567     while (intermediate->backing_hd) {
2568         if (intermediate->backing_hd == bs) {
2569             overlay = intermediate;
2570             break;
2571         }
2572         intermediate = intermediate->backing_hd;
2573     }
2574 
2575     return overlay;
2576 }
2577 
2578 typedef struct BlkIntermediateStates {
2579     BlockDriverState *bs;
2580     QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2581 } BlkIntermediateStates;
2582 
2583 
2584 /*
2585  * Drops images above 'base' up to and including 'top', and sets the image
2586  * above 'top' to have base as its backing file.
2587  *
2588  * Requires that the overlay to 'top' is opened r/w, so that the backing file
2589  * information in 'bs' can be properly updated.
2590  *
2591  * E.g., this will convert the following chain:
2592  * bottom <- base <- intermediate <- top <- active
2593  *
2594  * to
2595  *
2596  * bottom <- base <- active
2597  *
2598  * It is allowed for bottom==base, in which case it converts:
2599  *
2600  * base <- intermediate <- top <- active
2601  *
2602  * to
2603  *
2604  * base <- active
2605  *
2606  * Error conditions:
2607  *  if active == top, that is considered an error
2608  *
2609  */
2610 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2611                            BlockDriverState *base)
2612 {
2613     BlockDriverState *intermediate;
2614     BlockDriverState *base_bs = NULL;
2615     BlockDriverState *new_top_bs = NULL;
2616     BlkIntermediateStates *intermediate_state, *next;
2617     int ret = -EIO;
2618 
2619     QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2620     QSIMPLEQ_INIT(&states_to_delete);
2621 
2622     if (!top->drv || !base->drv) {
2623         goto exit;
2624     }
2625 
2626     new_top_bs = bdrv_find_overlay(active, top);
2627 
2628     if (new_top_bs == NULL) {
2629         /* we could not find the image above 'top', this is an error */
2630         goto exit;
2631     }
2632 
2633     /* special case of new_top_bs->backing_hd already pointing to base - nothing
2634      * to do, no intermediate images */
2635     if (new_top_bs->backing_hd == base) {
2636         ret = 0;
2637         goto exit;
2638     }
2639 
2640     intermediate = top;
2641 
2642     /* now we will go down through the list, and add each BDS we find
2643      * into our deletion queue, until we hit the 'base'
2644      */
2645     while (intermediate) {
2646         intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2647         intermediate_state->bs = intermediate;
2648         QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2649 
2650         if (intermediate->backing_hd == base) {
2651             base_bs = intermediate->backing_hd;
2652             break;
2653         }
2654         intermediate = intermediate->backing_hd;
2655     }
2656     if (base_bs == NULL) {
2657         /* something went wrong, we did not end at the base. safely
2658          * unravel everything, and exit with error */
2659         goto exit;
2660     }
2661 
2662     /* success - we can delete the intermediate states, and link top->base */
2663     ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2664                                    base_bs->drv ? base_bs->drv->format_name : "");
2665     if (ret) {
2666         goto exit;
2667     }
2668     bdrv_set_backing_hd(new_top_bs, base_bs);
2669 
2670     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2671         /* so that bdrv_close() does not recursively close the chain */
2672         bdrv_set_backing_hd(intermediate_state->bs, NULL);
2673         bdrv_unref(intermediate_state->bs);
2674     }
2675     ret = 0;
2676 
2677 exit:
2678     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2679         g_free(intermediate_state);
2680     }
2681     return ret;
2682 }
2683 
2684 
2685 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2686                                    size_t size)
2687 {
2688     int64_t len;
2689 
2690     if (size > INT_MAX) {
2691         return -EIO;
2692     }
2693 
2694     if (!bdrv_is_inserted(bs))
2695         return -ENOMEDIUM;
2696 
2697     if (bs->growable)
2698         return 0;
2699 
2700     len = bdrv_getlength(bs);
2701 
2702     if (offset < 0)
2703         return -EIO;
2704 
2705     if ((offset > len) || (len - offset < size))
2706         return -EIO;
2707 
2708     return 0;
2709 }
2710 
2711 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2712                               int nb_sectors)
2713 {
2714     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2715         return -EIO;
2716     }
2717 
2718     return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2719                                    nb_sectors * BDRV_SECTOR_SIZE);
2720 }
2721 
2722 typedef struct RwCo {
2723     BlockDriverState *bs;
2724     int64_t offset;
2725     QEMUIOVector *qiov;
2726     bool is_write;
2727     int ret;
2728     BdrvRequestFlags flags;
2729 } RwCo;
2730 
2731 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2732 {
2733     RwCo *rwco = opaque;
2734 
2735     if (!rwco->is_write) {
2736         rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2737                                       rwco->qiov->size, rwco->qiov,
2738                                       rwco->flags);
2739     } else {
2740         rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2741                                        rwco->qiov->size, rwco->qiov,
2742                                        rwco->flags);
2743     }
2744 }
2745 
2746 /*
2747  * Process a vectored synchronous request using coroutines
2748  */
2749 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2750                         QEMUIOVector *qiov, bool is_write,
2751                         BdrvRequestFlags flags)
2752 {
2753     Coroutine *co;
2754     RwCo rwco = {
2755         .bs = bs,
2756         .offset = offset,
2757         .qiov = qiov,
2758         .is_write = is_write,
2759         .ret = NOT_DONE,
2760         .flags = flags,
2761     };
2762 
2763     /**
2764      * In sync call context, when the vcpu is blocked, this throttling timer
2765      * will not fire; so the I/O throttling function has to be disabled here
2766      * if it has been enabled.
2767      */
2768     if (bs->io_limits_enabled) {
2769         fprintf(stderr, "Disabling I/O throttling on '%s' due "
2770                         "to synchronous I/O.\n", bdrv_get_device_name(bs));
2771         bdrv_io_limits_disable(bs);
2772     }
2773 
2774     if (qemu_in_coroutine()) {
2775         /* Fast-path if already in coroutine context */
2776         bdrv_rw_co_entry(&rwco);
2777     } else {
2778         co = qemu_coroutine_create(bdrv_rw_co_entry);
2779         qemu_coroutine_enter(co, &rwco);
2780         while (rwco.ret == NOT_DONE) {
2781             qemu_aio_wait();
2782         }
2783     }
2784     return rwco.ret;
2785 }
2786 
2787 /*
2788  * Process a synchronous request using coroutines
2789  */
2790 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2791                       int nb_sectors, bool is_write, BdrvRequestFlags flags)
2792 {
2793     QEMUIOVector qiov;
2794     struct iovec iov = {
2795         .iov_base = (void *)buf,
2796         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2797     };
2798 
2799     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2800         return -EINVAL;
2801     }
2802 
2803     qemu_iovec_init_external(&qiov, &iov, 1);
2804     return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2805                         &qiov, is_write, flags);
2806 }
2807 
2808 /* return < 0 if error. See bdrv_write() for the return codes */
2809 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2810               uint8_t *buf, int nb_sectors)
2811 {
2812     return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2813 }
2814 
2815 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2816 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2817                           uint8_t *buf, int nb_sectors)
2818 {
2819     bool enabled;
2820     int ret;
2821 
2822     enabled = bs->io_limits_enabled;
2823     bs->io_limits_enabled = false;
2824     ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2825     bs->io_limits_enabled = enabled;
2826     return ret;
2827 }
2828 
2829 /* Return < 0 if error. Important errors are:
2830   -EIO         generic I/O error (may happen for all errors)
2831   -ENOMEDIUM   No media inserted.
2832   -EINVAL      Invalid sector number or nb_sectors
2833   -EACCES      Trying to write a read-only device
2834 */
2835 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2836                const uint8_t *buf, int nb_sectors)
2837 {
2838     return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2839 }
2840 
2841 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2842                       int nb_sectors, BdrvRequestFlags flags)
2843 {
2844     return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2845                       BDRV_REQ_ZERO_WRITE | flags);
2846 }
2847 
2848 /*
2849  * Completely zero out a block device with the help of bdrv_write_zeroes.
2850  * The operation is sped up by checking the block status and only writing
2851  * zeroes to the device if they currently do not return zeroes. Optional
2852  * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2853  *
2854  * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2855  */
2856 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2857 {
2858     int64_t target_size;
2859     int64_t ret, nb_sectors, sector_num = 0;
2860     int n;
2861 
2862     target_size = bdrv_getlength(bs);
2863     if (target_size < 0) {
2864         return target_size;
2865     }
2866     target_size /= BDRV_SECTOR_SIZE;
2867 
2868     for (;;) {
2869         nb_sectors = target_size - sector_num;
2870         if (nb_sectors <= 0) {
2871             return 0;
2872         }
2873         if (nb_sectors > INT_MAX) {
2874             nb_sectors = INT_MAX;
2875         }
2876         ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2877         if (ret < 0) {
2878             error_report("error getting block status at sector %" PRId64 ": %s",
2879                          sector_num, strerror(-ret));
2880             return ret;
2881         }
2882         if (ret & BDRV_BLOCK_ZERO) {
2883             sector_num += n;
2884             continue;
2885         }
2886         ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2887         if (ret < 0) {
2888             error_report("error writing zeroes at sector %" PRId64 ": %s",
2889                          sector_num, strerror(-ret));
2890             return ret;
2891         }
2892         sector_num += n;
2893     }
2894 }
2895 
2896 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2897 {
2898     QEMUIOVector qiov;
2899     struct iovec iov = {
2900         .iov_base = (void *)buf,
2901         .iov_len = bytes,
2902     };
2903     int ret;
2904 
2905     if (bytes < 0) {
2906         return -EINVAL;
2907     }
2908 
2909     qemu_iovec_init_external(&qiov, &iov, 1);
2910     ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2911     if (ret < 0) {
2912         return ret;
2913     }
2914 
2915     return bytes;
2916 }
2917 
2918 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2919 {
2920     int ret;
2921 
2922     ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2923     if (ret < 0) {
2924         return ret;
2925     }
2926 
2927     return qiov->size;
2928 }
2929 
2930 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2931                 const void *buf, int bytes)
2932 {
2933     QEMUIOVector qiov;
2934     struct iovec iov = {
2935         .iov_base   = (void *) buf,
2936         .iov_len    = bytes,
2937     };
2938 
2939     if (bytes < 0) {
2940         return -EINVAL;
2941     }
2942 
2943     qemu_iovec_init_external(&qiov, &iov, 1);
2944     return bdrv_pwritev(bs, offset, &qiov);
2945 }
2946 
2947 /*
2948  * Writes to the file and ensures that no writes are reordered across this
2949  * request (acts as a barrier)
2950  *
2951  * Returns 0 on success, -errno in error cases.
2952  */
2953 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2954     const void *buf, int count)
2955 {
2956     int ret;
2957 
2958     ret = bdrv_pwrite(bs, offset, buf, count);
2959     if (ret < 0) {
2960         return ret;
2961     }
2962 
2963     /* No flush needed for cache modes that already do it */
2964     if (bs->enable_write_cache) {
2965         bdrv_flush(bs);
2966     }
2967 
2968     return 0;
2969 }
2970 
2971 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2972         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2973 {
2974     /* Perform I/O through a temporary buffer so that users who scribble over
2975      * their read buffer while the operation is in progress do not end up
2976      * modifying the image file.  This is critical for zero-copy guest I/O
2977      * where anything might happen inside guest memory.
2978      */
2979     void *bounce_buffer;
2980 
2981     BlockDriver *drv = bs->drv;
2982     struct iovec iov;
2983     QEMUIOVector bounce_qiov;
2984     int64_t cluster_sector_num;
2985     int cluster_nb_sectors;
2986     size_t skip_bytes;
2987     int ret;
2988 
2989     /* Cover entire cluster so no additional backing file I/O is required when
2990      * allocating cluster in the image file.
2991      */
2992     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2993                            &cluster_sector_num, &cluster_nb_sectors);
2994 
2995     trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2996                                    cluster_sector_num, cluster_nb_sectors);
2997 
2998     iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2999     iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
3000     qemu_iovec_init_external(&bounce_qiov, &iov, 1);
3001 
3002     ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
3003                              &bounce_qiov);
3004     if (ret < 0) {
3005         goto err;
3006     }
3007 
3008     if (drv->bdrv_co_write_zeroes &&
3009         buffer_is_zero(bounce_buffer, iov.iov_len)) {
3010         ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
3011                                       cluster_nb_sectors, 0);
3012     } else {
3013         /* This does not change the data on the disk, it is not necessary
3014          * to flush even in cache=writethrough mode.
3015          */
3016         ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
3017                                   &bounce_qiov);
3018     }
3019 
3020     if (ret < 0) {
3021         /* It might be okay to ignore write errors for guest requests.  If this
3022          * is a deliberate copy-on-read then we don't want to ignore the error.
3023          * Simply report it in all cases.
3024          */
3025         goto err;
3026     }
3027 
3028     skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
3029     qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
3030                         nb_sectors * BDRV_SECTOR_SIZE);
3031 
3032 err:
3033     qemu_vfree(bounce_buffer);
3034     return ret;
3035 }
3036 
3037 /*
3038  * Forwards an already correctly aligned request to the BlockDriver. This
3039  * handles copy on read and zeroing after EOF; any other features must be
3040  * implemented by the caller.
3041  */
3042 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3043     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3044     int64_t align, QEMUIOVector *qiov, int flags)
3045 {
3046     BlockDriver *drv = bs->drv;
3047     int ret;
3048 
3049     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3050     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3051 
3052     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3053     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3054 
3055     /* Handle Copy on Read and associated serialisation */
3056     if (flags & BDRV_REQ_COPY_ON_READ) {
3057         /* If we touch the same cluster it counts as an overlap.  This
3058          * guarantees that allocating writes will be serialized and not race
3059          * with each other for the same cluster.  For example, in copy-on-read
3060          * it ensures that the CoR read and write operations are atomic and
3061          * guest writes cannot interleave between them. */
3062         mark_request_serialising(req, bdrv_get_cluster_size(bs));
3063     }
3064 
3065     wait_serialising_requests(req);
3066 
3067     if (flags & BDRV_REQ_COPY_ON_READ) {
3068         int pnum;
3069 
3070         ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3071         if (ret < 0) {
3072             goto out;
3073         }
3074 
3075         if (!ret || pnum != nb_sectors) {
3076             ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3077             goto out;
3078         }
3079     }
3080 
3081     /* Forward the request to the BlockDriver */
3082     if (!(bs->zero_beyond_eof && bs->growable)) {
3083         ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3084     } else {
3085         /* Read zeros after EOF of growable BDSes */
3086         int64_t len, total_sectors, max_nb_sectors;
3087 
3088         len = bdrv_getlength(bs);
3089         if (len < 0) {
3090             ret = len;
3091             goto out;
3092         }
3093 
3094         total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3095         max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3096                                   align >> BDRV_SECTOR_BITS);
3097         if (max_nb_sectors > 0) {
3098             ret = drv->bdrv_co_readv(bs, sector_num,
3099                                      MIN(nb_sectors, max_nb_sectors), qiov);
3100         } else {
3101             ret = 0;
3102         }
3103 
3104         /* Reading beyond end of file is supposed to produce zeroes */
3105         if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3106             uint64_t offset = MAX(0, total_sectors - sector_num);
3107             uint64_t bytes = (sector_num + nb_sectors - offset) *
3108                               BDRV_SECTOR_SIZE;
3109             qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3110         }
3111     }
3112 
3113 out:
3114     return ret;
3115 }
3116 
3117 /*
3118  * Handle a read request in coroutine context
3119  */
3120 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3121     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3122     BdrvRequestFlags flags)
3123 {
3124     BlockDriver *drv = bs->drv;
3125     BdrvTrackedRequest req;
3126 
3127     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3128     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3129     uint8_t *head_buf = NULL;
3130     uint8_t *tail_buf = NULL;
3131     QEMUIOVector local_qiov;
3132     bool use_local_qiov = false;
3133     int ret;
3134 
3135     if (!drv) {
3136         return -ENOMEDIUM;
3137     }
3138     if (bdrv_check_byte_request(bs, offset, bytes)) {
3139         return -EIO;
3140     }
3141 
3142     if (bs->copy_on_read) {
3143         flags |= BDRV_REQ_COPY_ON_READ;
3144     }
3145 
3146     /* throttling disk I/O */
3147     if (bs->io_limits_enabled) {
3148         bdrv_io_limits_intercept(bs, bytes, false);
3149     }
3150 
3151     /* Align read if necessary by padding qiov */
3152     if (offset & (align - 1)) {
3153         head_buf = qemu_blockalign(bs, align);
3154         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3155         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3156         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3157         use_local_qiov = true;
3158 
3159         bytes += offset & (align - 1);
3160         offset = offset & ~(align - 1);
3161     }
3162 
3163     if ((offset + bytes) & (align - 1)) {
3164         if (!use_local_qiov) {
3165             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3166             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3167             use_local_qiov = true;
3168         }
3169         tail_buf = qemu_blockalign(bs, align);
3170         qemu_iovec_add(&local_qiov, tail_buf,
3171                        align - ((offset + bytes) & (align - 1)));
3172 
3173         bytes = ROUND_UP(bytes, align);
3174     }
3175 
3176     tracked_request_begin(&req, bs, offset, bytes, false);
3177     ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3178                               use_local_qiov ? &local_qiov : qiov,
3179                               flags);
3180     tracked_request_end(&req);
3181 
3182     if (use_local_qiov) {
3183         qemu_iovec_destroy(&local_qiov);
3184         qemu_vfree(head_buf);
3185         qemu_vfree(tail_buf);
3186     }
3187 
3188     return ret;
3189 }
3190 
3191 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3192     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3193     BdrvRequestFlags flags)
3194 {
3195     if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3196         return -EINVAL;
3197     }
3198 
3199     return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3200                              nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3201 }
3202 
3203 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3204     int nb_sectors, QEMUIOVector *qiov)
3205 {
3206     trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3207 
3208     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3209 }
3210 
3211 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3212     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3213 {
3214     trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3215 
3216     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3217                             BDRV_REQ_COPY_ON_READ);
3218 }
3219 
3220 /* if no limit is specified in the BlockLimits use a default
3221  * of 32768 512-byte sectors (16 MiB) per request.
3222  */
3223 #define MAX_WRITE_ZEROES_DEFAULT 32768
3224 
3225 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3226     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3227 {
3228     BlockDriver *drv = bs->drv;
3229     QEMUIOVector qiov;
3230     struct iovec iov = {0};
3231     int ret = 0;
3232 
3233     int max_write_zeroes = bs->bl.max_write_zeroes ?
3234                            bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3235 
3236     while (nb_sectors > 0 && !ret) {
3237         int num = nb_sectors;
3238 
3239         /* Align request.  Block drivers can expect the "bulk" of the request
3240          * to be aligned.
3241          */
3242         if (bs->bl.write_zeroes_alignment
3243             && num > bs->bl.write_zeroes_alignment) {
3244             if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3245                 /* Make a small request up to the first aligned sector.  */
3246                 num = bs->bl.write_zeroes_alignment;
3247                 num -= sector_num % bs->bl.write_zeroes_alignment;
3248             } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3249                 /* Shorten the request to the last aligned sector.  num cannot
3250                  * underflow because num > bs->bl.write_zeroes_alignment.
3251                  */
3252                 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3253             }
3254         }
3255 
3256         /* limit request size */
3257         if (num > max_write_zeroes) {
3258             num = max_write_zeroes;
3259         }
3260 
3261         ret = -ENOTSUP;
3262         /* First try the efficient write zeroes operation */
3263         if (drv->bdrv_co_write_zeroes) {
3264             ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3265         }
3266 
3267         if (ret == -ENOTSUP) {
3268             /* Fall back to bounce buffer if write zeroes is unsupported */
3269             iov.iov_len = num * BDRV_SECTOR_SIZE;
3270             if (iov.iov_base == NULL) {
3271                 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3272                 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3273             }
3274             qemu_iovec_init_external(&qiov, &iov, 1);
3275 
3276             ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3277 
3278             /* Keep bounce buffer around if it is big enough for all
3279              * all future requests.
3280              */
3281             if (num < max_write_zeroes) {
3282                 qemu_vfree(iov.iov_base);
3283                 iov.iov_base = NULL;
3284             }
3285         }
3286 
3287         sector_num += num;
3288         nb_sectors -= num;
3289     }
3290 
3291     qemu_vfree(iov.iov_base);
3292     return ret;
3293 }
3294 
3295 /*
3296  * Forwards an already correctly aligned write request to the BlockDriver.
3297  */
3298 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3299     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3300     QEMUIOVector *qiov, int flags)
3301 {
3302     BlockDriver *drv = bs->drv;
3303     bool waited;
3304     int ret;
3305 
3306     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3307     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3308 
3309     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3310     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3311 
3312     waited = wait_serialising_requests(req);
3313     assert(!waited || !req->serialising);
3314     assert(req->overlap_offset <= offset);
3315     assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3316 
3317     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3318 
3319     if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3320         !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3321         qemu_iovec_is_zero(qiov)) {
3322         flags |= BDRV_REQ_ZERO_WRITE;
3323         if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3324             flags |= BDRV_REQ_MAY_UNMAP;
3325         }
3326     }
3327 
3328     if (ret < 0) {
3329         /* Do nothing, write notifier decided to fail this request */
3330     } else if (flags & BDRV_REQ_ZERO_WRITE) {
3331         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3332         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3333     } else {
3334         BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3335         ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3336     }
3337     BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3338 
3339     if (ret == 0 && !bs->enable_write_cache) {
3340         ret = bdrv_co_flush(bs);
3341     }
3342 
3343     bdrv_set_dirty(bs, sector_num, nb_sectors);
3344 
3345     if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3346         bs->wr_highest_sector = sector_num + nb_sectors - 1;
3347     }
3348     if (bs->growable && ret >= 0) {
3349         bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3350     }
3351 
3352     return ret;
3353 }
3354 
3355 /*
3356  * Handle a write request in coroutine context
3357  */
3358 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3359     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3360     BdrvRequestFlags flags)
3361 {
3362     BdrvTrackedRequest req;
3363     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3364     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3365     uint8_t *head_buf = NULL;
3366     uint8_t *tail_buf = NULL;
3367     QEMUIOVector local_qiov;
3368     bool use_local_qiov = false;
3369     int ret;
3370 
3371     if (!bs->drv) {
3372         return -ENOMEDIUM;
3373     }
3374     if (bs->read_only) {
3375         return -EACCES;
3376     }
3377     if (bdrv_check_byte_request(bs, offset, bytes)) {
3378         return -EIO;
3379     }
3380 
3381     /* throttling disk I/O */
3382     if (bs->io_limits_enabled) {
3383         bdrv_io_limits_intercept(bs, bytes, true);
3384     }
3385 
3386     /*
3387      * Align write if necessary by performing a read-modify-write cycle.
3388      * Pad qiov with the read parts and be sure to have a tracked request not
3389      * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3390      */
3391     tracked_request_begin(&req, bs, offset, bytes, true);
3392 
3393     if (offset & (align - 1)) {
3394         QEMUIOVector head_qiov;
3395         struct iovec head_iov;
3396 
3397         mark_request_serialising(&req, align);
3398         wait_serialising_requests(&req);
3399 
3400         head_buf = qemu_blockalign(bs, align);
3401         head_iov = (struct iovec) {
3402             .iov_base   = head_buf,
3403             .iov_len    = align,
3404         };
3405         qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3406 
3407         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3408         ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3409                                   align, &head_qiov, 0);
3410         if (ret < 0) {
3411             goto fail;
3412         }
3413         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3414 
3415         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3416         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3417         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3418         use_local_qiov = true;
3419 
3420         bytes += offset & (align - 1);
3421         offset = offset & ~(align - 1);
3422     }
3423 
3424     if ((offset + bytes) & (align - 1)) {
3425         QEMUIOVector tail_qiov;
3426         struct iovec tail_iov;
3427         size_t tail_bytes;
3428         bool waited;
3429 
3430         mark_request_serialising(&req, align);
3431         waited = wait_serialising_requests(&req);
3432         assert(!waited || !use_local_qiov);
3433 
3434         tail_buf = qemu_blockalign(bs, align);
3435         tail_iov = (struct iovec) {
3436             .iov_base   = tail_buf,
3437             .iov_len    = align,
3438         };
3439         qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3440 
3441         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3442         ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3443                                   align, &tail_qiov, 0);
3444         if (ret < 0) {
3445             goto fail;
3446         }
3447         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3448 
3449         if (!use_local_qiov) {
3450             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3451             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3452             use_local_qiov = true;
3453         }
3454 
3455         tail_bytes = (offset + bytes) & (align - 1);
3456         qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3457 
3458         bytes = ROUND_UP(bytes, align);
3459     }
3460 
3461     ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3462                                use_local_qiov ? &local_qiov : qiov,
3463                                flags);
3464 
3465 fail:
3466     tracked_request_end(&req);
3467 
3468     if (use_local_qiov) {
3469         qemu_iovec_destroy(&local_qiov);
3470     }
3471     qemu_vfree(head_buf);
3472     qemu_vfree(tail_buf);
3473 
3474     return ret;
3475 }
3476 
3477 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3478     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3479     BdrvRequestFlags flags)
3480 {
3481     if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3482         return -EINVAL;
3483     }
3484 
3485     return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3486                               nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3487 }
3488 
3489 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3490     int nb_sectors, QEMUIOVector *qiov)
3491 {
3492     trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3493 
3494     return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3495 }
3496 
3497 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3498                                       int64_t sector_num, int nb_sectors,
3499                                       BdrvRequestFlags flags)
3500 {
3501     trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3502 
3503     if (!(bs->open_flags & BDRV_O_UNMAP)) {
3504         flags &= ~BDRV_REQ_MAY_UNMAP;
3505     }
3506 
3507     return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3508                              BDRV_REQ_ZERO_WRITE | flags);
3509 }
3510 
3511 /**
3512  * Truncate file to 'offset' bytes (needed only for file protocols)
3513  */
3514 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3515 {
3516     BlockDriver *drv = bs->drv;
3517     int ret;
3518     if (!drv)
3519         return -ENOMEDIUM;
3520     if (!drv->bdrv_truncate)
3521         return -ENOTSUP;
3522     if (bs->read_only)
3523         return -EACCES;
3524     if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_RESIZE, NULL)) {
3525         return -EBUSY;
3526     }
3527     ret = drv->bdrv_truncate(bs, offset);
3528     if (ret == 0) {
3529         ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3530         bdrv_dev_resize_cb(bs);
3531     }
3532     return ret;
3533 }
3534 
3535 /**
3536  * Length of a allocated file in bytes. Sparse files are counted by actual
3537  * allocated space. Return < 0 if error or unknown.
3538  */
3539 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3540 {
3541     BlockDriver *drv = bs->drv;
3542     if (!drv) {
3543         return -ENOMEDIUM;
3544     }
3545     if (drv->bdrv_get_allocated_file_size) {
3546         return drv->bdrv_get_allocated_file_size(bs);
3547     }
3548     if (bs->file) {
3549         return bdrv_get_allocated_file_size(bs->file);
3550     }
3551     return -ENOTSUP;
3552 }
3553 
3554 /**
3555  * Length of a file in bytes. Return < 0 if error or unknown.
3556  */
3557 int64_t bdrv_getlength(BlockDriverState *bs)
3558 {
3559     BlockDriver *drv = bs->drv;
3560     if (!drv)
3561         return -ENOMEDIUM;
3562 
3563     if (drv->has_variable_length) {
3564         int ret = refresh_total_sectors(bs, bs->total_sectors);
3565         if (ret < 0) {
3566             return ret;
3567         }
3568     }
3569     return bs->total_sectors * BDRV_SECTOR_SIZE;
3570 }
3571 
3572 /* return 0 as number of sectors if no device present or error */
3573 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3574 {
3575     int64_t length;
3576     length = bdrv_getlength(bs);
3577     if (length < 0)
3578         length = 0;
3579     else
3580         length = length >> BDRV_SECTOR_BITS;
3581     *nb_sectors_ptr = length;
3582 }
3583 
3584 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3585                        BlockdevOnError on_write_error)
3586 {
3587     bs->on_read_error = on_read_error;
3588     bs->on_write_error = on_write_error;
3589 }
3590 
3591 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3592 {
3593     return is_read ? bs->on_read_error : bs->on_write_error;
3594 }
3595 
3596 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3597 {
3598     BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3599 
3600     switch (on_err) {
3601     case BLOCKDEV_ON_ERROR_ENOSPC:
3602         return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3603     case BLOCKDEV_ON_ERROR_STOP:
3604         return BDRV_ACTION_STOP;
3605     case BLOCKDEV_ON_ERROR_REPORT:
3606         return BDRV_ACTION_REPORT;
3607     case BLOCKDEV_ON_ERROR_IGNORE:
3608         return BDRV_ACTION_IGNORE;
3609     default:
3610         abort();
3611     }
3612 }
3613 
3614 /* This is done by device models because, while the block layer knows
3615  * about the error, it does not know whether an operation comes from
3616  * the device or the block layer (from a job, for example).
3617  */
3618 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3619                        bool is_read, int error)
3620 {
3621     assert(error >= 0);
3622     bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3623     if (action == BDRV_ACTION_STOP) {
3624         vm_stop(RUN_STATE_IO_ERROR);
3625         bdrv_iostatus_set_err(bs, error);
3626     }
3627 }
3628 
3629 int bdrv_is_read_only(BlockDriverState *bs)
3630 {
3631     return bs->read_only;
3632 }
3633 
3634 int bdrv_is_sg(BlockDriverState *bs)
3635 {
3636     return bs->sg;
3637 }
3638 
3639 int bdrv_enable_write_cache(BlockDriverState *bs)
3640 {
3641     return bs->enable_write_cache;
3642 }
3643 
3644 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3645 {
3646     bs->enable_write_cache = wce;
3647 
3648     /* so a reopen() will preserve wce */
3649     if (wce) {
3650         bs->open_flags |= BDRV_O_CACHE_WB;
3651     } else {
3652         bs->open_flags &= ~BDRV_O_CACHE_WB;
3653     }
3654 }
3655 
3656 int bdrv_is_encrypted(BlockDriverState *bs)
3657 {
3658     if (bs->backing_hd && bs->backing_hd->encrypted)
3659         return 1;
3660     return bs->encrypted;
3661 }
3662 
3663 int bdrv_key_required(BlockDriverState *bs)
3664 {
3665     BlockDriverState *backing_hd = bs->backing_hd;
3666 
3667     if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3668         return 1;
3669     return (bs->encrypted && !bs->valid_key);
3670 }
3671 
3672 int bdrv_set_key(BlockDriverState *bs, const char *key)
3673 {
3674     int ret;
3675     if (bs->backing_hd && bs->backing_hd->encrypted) {
3676         ret = bdrv_set_key(bs->backing_hd, key);
3677         if (ret < 0)
3678             return ret;
3679         if (!bs->encrypted)
3680             return 0;
3681     }
3682     if (!bs->encrypted) {
3683         return -EINVAL;
3684     } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3685         return -ENOMEDIUM;
3686     }
3687     ret = bs->drv->bdrv_set_key(bs, key);
3688     if (ret < 0) {
3689         bs->valid_key = 0;
3690     } else if (!bs->valid_key) {
3691         bs->valid_key = 1;
3692         /* call the change callback now, we skipped it on open */
3693         bdrv_dev_change_media_cb(bs, true);
3694     }
3695     return ret;
3696 }
3697 
3698 const char *bdrv_get_format_name(BlockDriverState *bs)
3699 {
3700     return bs->drv ? bs->drv->format_name : NULL;
3701 }
3702 
3703 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3704                          void *opaque)
3705 {
3706     BlockDriver *drv;
3707     int count = 0;
3708     const char **formats = NULL;
3709 
3710     QLIST_FOREACH(drv, &bdrv_drivers, list) {
3711         if (drv->format_name) {
3712             bool found = false;
3713             int i = count;
3714             while (formats && i && !found) {
3715                 found = !strcmp(formats[--i], drv->format_name);
3716             }
3717 
3718             if (!found) {
3719                 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3720                 formats[count++] = drv->format_name;
3721                 it(opaque, drv->format_name);
3722             }
3723         }
3724     }
3725     g_free(formats);
3726 }
3727 
3728 /* This function is to find block backend bs */
3729 BlockDriverState *bdrv_find(const char *name)
3730 {
3731     BlockDriverState *bs;
3732 
3733     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3734         if (!strcmp(name, bs->device_name)) {
3735             return bs;
3736         }
3737     }
3738     return NULL;
3739 }
3740 
3741 /* This function is to find a node in the bs graph */
3742 BlockDriverState *bdrv_find_node(const char *node_name)
3743 {
3744     BlockDriverState *bs;
3745 
3746     assert(node_name);
3747 
3748     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3749         if (!strcmp(node_name, bs->node_name)) {
3750             return bs;
3751         }
3752     }
3753     return NULL;
3754 }
3755 
3756 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3757 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3758 {
3759     BlockDeviceInfoList *list, *entry;
3760     BlockDriverState *bs;
3761 
3762     list = NULL;
3763     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3764         entry = g_malloc0(sizeof(*entry));
3765         entry->value = bdrv_block_device_info(bs);
3766         entry->next = list;
3767         list = entry;
3768     }
3769 
3770     return list;
3771 }
3772 
3773 BlockDriverState *bdrv_lookup_bs(const char *device,
3774                                  const char *node_name,
3775                                  Error **errp)
3776 {
3777     BlockDriverState *bs = NULL;
3778 
3779     if (device) {
3780         bs = bdrv_find(device);
3781 
3782         if (bs) {
3783             return bs;
3784         }
3785     }
3786 
3787     if (node_name) {
3788         bs = bdrv_find_node(node_name);
3789 
3790         if (bs) {
3791             return bs;
3792         }
3793     }
3794 
3795     error_setg(errp, "Cannot find device=%s nor node_name=%s",
3796                      device ? device : "",
3797                      node_name ? node_name : "");
3798     return NULL;
3799 }
3800 
3801 BlockDriverState *bdrv_next(BlockDriverState *bs)
3802 {
3803     if (!bs) {
3804         return QTAILQ_FIRST(&bdrv_states);
3805     }
3806     return QTAILQ_NEXT(bs, device_list);
3807 }
3808 
3809 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3810 {
3811     BlockDriverState *bs;
3812 
3813     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3814         it(opaque, bs);
3815     }
3816 }
3817 
3818 const char *bdrv_get_device_name(BlockDriverState *bs)
3819 {
3820     return bs->device_name;
3821 }
3822 
3823 int bdrv_get_flags(BlockDriverState *bs)
3824 {
3825     return bs->open_flags;
3826 }
3827 
3828 int bdrv_flush_all(void)
3829 {
3830     BlockDriverState *bs;
3831     int result = 0;
3832 
3833     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3834         int ret = bdrv_flush(bs);
3835         if (ret < 0 && !result) {
3836             result = ret;
3837         }
3838     }
3839 
3840     return result;
3841 }
3842 
3843 int bdrv_has_zero_init_1(BlockDriverState *bs)
3844 {
3845     return 1;
3846 }
3847 
3848 int bdrv_has_zero_init(BlockDriverState *bs)
3849 {
3850     assert(bs->drv);
3851 
3852     /* If BS is a copy on write image, it is initialized to
3853        the contents of the base image, which may not be zeroes.  */
3854     if (bs->backing_hd) {
3855         return 0;
3856     }
3857     if (bs->drv->bdrv_has_zero_init) {
3858         return bs->drv->bdrv_has_zero_init(bs);
3859     }
3860 
3861     /* safe default */
3862     return 0;
3863 }
3864 
3865 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3866 {
3867     BlockDriverInfo bdi;
3868 
3869     if (bs->backing_hd) {
3870         return false;
3871     }
3872 
3873     if (bdrv_get_info(bs, &bdi) == 0) {
3874         return bdi.unallocated_blocks_are_zero;
3875     }
3876 
3877     return false;
3878 }
3879 
3880 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3881 {
3882     BlockDriverInfo bdi;
3883 
3884     if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3885         return false;
3886     }
3887 
3888     if (bdrv_get_info(bs, &bdi) == 0) {
3889         return bdi.can_write_zeroes_with_unmap;
3890     }
3891 
3892     return false;
3893 }
3894 
3895 typedef struct BdrvCoGetBlockStatusData {
3896     BlockDriverState *bs;
3897     BlockDriverState *base;
3898     int64_t sector_num;
3899     int nb_sectors;
3900     int *pnum;
3901     int64_t ret;
3902     bool done;
3903 } BdrvCoGetBlockStatusData;
3904 
3905 /*
3906  * Returns true iff the specified sector is present in the disk image. Drivers
3907  * not implementing the functionality are assumed to not support backing files,
3908  * hence all their sectors are reported as allocated.
3909  *
3910  * If 'sector_num' is beyond the end of the disk image the return value is 0
3911  * and 'pnum' is set to 0.
3912  *
3913  * 'pnum' is set to the number of sectors (including and immediately following
3914  * the specified sector) that are known to be in the same
3915  * allocated/unallocated state.
3916  *
3917  * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
3918  * beyond the end of the disk image it will be clamped.
3919  */
3920 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3921                                                      int64_t sector_num,
3922                                                      int nb_sectors, int *pnum)
3923 {
3924     int64_t length;
3925     int64_t n;
3926     int64_t ret, ret2;
3927 
3928     length = bdrv_getlength(bs);
3929     if (length < 0) {
3930         return length;
3931     }
3932 
3933     if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3934         *pnum = 0;
3935         return 0;
3936     }
3937 
3938     n = bs->total_sectors - sector_num;
3939     if (n < nb_sectors) {
3940         nb_sectors = n;
3941     }
3942 
3943     if (!bs->drv->bdrv_co_get_block_status) {
3944         *pnum = nb_sectors;
3945         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3946         if (bs->drv->protocol_name) {
3947             ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3948         }
3949         return ret;
3950     }
3951 
3952     ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3953     if (ret < 0) {
3954         *pnum = 0;
3955         return ret;
3956     }
3957 
3958     if (ret & BDRV_BLOCK_RAW) {
3959         assert(ret & BDRV_BLOCK_OFFSET_VALID);
3960         return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3961                                      *pnum, pnum);
3962     }
3963 
3964     if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3965         ret |= BDRV_BLOCK_ALLOCATED;
3966     }
3967 
3968     if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3969         if (bdrv_unallocated_blocks_are_zero(bs)) {
3970             ret |= BDRV_BLOCK_ZERO;
3971         } else if (bs->backing_hd) {
3972             BlockDriverState *bs2 = bs->backing_hd;
3973             int64_t length2 = bdrv_getlength(bs2);
3974             if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3975                 ret |= BDRV_BLOCK_ZERO;
3976             }
3977         }
3978     }
3979 
3980     if (bs->file &&
3981         (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3982         (ret & BDRV_BLOCK_OFFSET_VALID)) {
3983         ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3984                                         *pnum, pnum);
3985         if (ret2 >= 0) {
3986             /* Ignore errors.  This is just providing extra information, it
3987              * is useful but not necessary.
3988              */
3989             ret |= (ret2 & BDRV_BLOCK_ZERO);
3990         }
3991     }
3992 
3993     return ret;
3994 }
3995 
3996 /* Coroutine wrapper for bdrv_get_block_status() */
3997 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3998 {
3999     BdrvCoGetBlockStatusData *data = opaque;
4000     BlockDriverState *bs = data->bs;
4001 
4002     data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4003                                          data->pnum);
4004     data->done = true;
4005 }
4006 
4007 /*
4008  * Synchronous wrapper around bdrv_co_get_block_status().
4009  *
4010  * See bdrv_co_get_block_status() for details.
4011  */
4012 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4013                               int nb_sectors, int *pnum)
4014 {
4015     Coroutine *co;
4016     BdrvCoGetBlockStatusData data = {
4017         .bs = bs,
4018         .sector_num = sector_num,
4019         .nb_sectors = nb_sectors,
4020         .pnum = pnum,
4021         .done = false,
4022     };
4023 
4024     if (qemu_in_coroutine()) {
4025         /* Fast-path if already in coroutine context */
4026         bdrv_get_block_status_co_entry(&data);
4027     } else {
4028         co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4029         qemu_coroutine_enter(co, &data);
4030         while (!data.done) {
4031             qemu_aio_wait();
4032         }
4033     }
4034     return data.ret;
4035 }
4036 
4037 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4038                                    int nb_sectors, int *pnum)
4039 {
4040     int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4041     if (ret < 0) {
4042         return ret;
4043     }
4044     return (ret & BDRV_BLOCK_ALLOCATED);
4045 }
4046 
4047 /*
4048  * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4049  *
4050  * Return true if the given sector is allocated in any image between
4051  * BASE and TOP (inclusive).  BASE can be NULL to check if the given
4052  * sector is allocated in any image of the chain.  Return false otherwise.
4053  *
4054  * 'pnum' is set to the number of sectors (including and immediately following
4055  *  the specified sector) that are known to be in the same
4056  *  allocated/unallocated state.
4057  *
4058  */
4059 int bdrv_is_allocated_above(BlockDriverState *top,
4060                             BlockDriverState *base,
4061                             int64_t sector_num,
4062                             int nb_sectors, int *pnum)
4063 {
4064     BlockDriverState *intermediate;
4065     int ret, n = nb_sectors;
4066 
4067     intermediate = top;
4068     while (intermediate && intermediate != base) {
4069         int pnum_inter;
4070         ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4071                                 &pnum_inter);
4072         if (ret < 0) {
4073             return ret;
4074         } else if (ret) {
4075             *pnum = pnum_inter;
4076             return 1;
4077         }
4078 
4079         /*
4080          * [sector_num, nb_sectors] is unallocated on top but intermediate
4081          * might have
4082          *
4083          * [sector_num+x, nr_sectors] allocated.
4084          */
4085         if (n > pnum_inter &&
4086             (intermediate == top ||
4087              sector_num + pnum_inter < intermediate->total_sectors)) {
4088             n = pnum_inter;
4089         }
4090 
4091         intermediate = intermediate->backing_hd;
4092     }
4093 
4094     *pnum = n;
4095     return 0;
4096 }
4097 
4098 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4099 {
4100     if (bs->backing_hd && bs->backing_hd->encrypted)
4101         return bs->backing_file;
4102     else if (bs->encrypted)
4103         return bs->filename;
4104     else
4105         return NULL;
4106 }
4107 
4108 void bdrv_get_backing_filename(BlockDriverState *bs,
4109                                char *filename, int filename_size)
4110 {
4111     pstrcpy(filename, filename_size, bs->backing_file);
4112 }
4113 
4114 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4115                           const uint8_t *buf, int nb_sectors)
4116 {
4117     BlockDriver *drv = bs->drv;
4118     if (!drv)
4119         return -ENOMEDIUM;
4120     if (!drv->bdrv_write_compressed)
4121         return -ENOTSUP;
4122     if (bdrv_check_request(bs, sector_num, nb_sectors))
4123         return -EIO;
4124 
4125     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4126 
4127     return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4128 }
4129 
4130 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4131 {
4132     BlockDriver *drv = bs->drv;
4133     if (!drv)
4134         return -ENOMEDIUM;
4135     if (!drv->bdrv_get_info)
4136         return -ENOTSUP;
4137     memset(bdi, 0, sizeof(*bdi));
4138     return drv->bdrv_get_info(bs, bdi);
4139 }
4140 
4141 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4142 {
4143     BlockDriver *drv = bs->drv;
4144     if (drv && drv->bdrv_get_specific_info) {
4145         return drv->bdrv_get_specific_info(bs);
4146     }
4147     return NULL;
4148 }
4149 
4150 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4151                       int64_t pos, int size)
4152 {
4153     QEMUIOVector qiov;
4154     struct iovec iov = {
4155         .iov_base   = (void *) buf,
4156         .iov_len    = size,
4157     };
4158 
4159     qemu_iovec_init_external(&qiov, &iov, 1);
4160     return bdrv_writev_vmstate(bs, &qiov, pos);
4161 }
4162 
4163 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4164 {
4165     BlockDriver *drv = bs->drv;
4166 
4167     if (!drv) {
4168         return -ENOMEDIUM;
4169     } else if (drv->bdrv_save_vmstate) {
4170         return drv->bdrv_save_vmstate(bs, qiov, pos);
4171     } else if (bs->file) {
4172         return bdrv_writev_vmstate(bs->file, qiov, pos);
4173     }
4174 
4175     return -ENOTSUP;
4176 }
4177 
4178 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4179                       int64_t pos, int size)
4180 {
4181     BlockDriver *drv = bs->drv;
4182     if (!drv)
4183         return -ENOMEDIUM;
4184     if (drv->bdrv_load_vmstate)
4185         return drv->bdrv_load_vmstate(bs, buf, pos, size);
4186     if (bs->file)
4187         return bdrv_load_vmstate(bs->file, buf, pos, size);
4188     return -ENOTSUP;
4189 }
4190 
4191 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4192 {
4193     if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4194         return;
4195     }
4196 
4197     bs->drv->bdrv_debug_event(bs, event);
4198 }
4199 
4200 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4201                           const char *tag)
4202 {
4203     while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4204         bs = bs->file;
4205     }
4206 
4207     if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4208         return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4209     }
4210 
4211     return -ENOTSUP;
4212 }
4213 
4214 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4215 {
4216     while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4217         bs = bs->file;
4218     }
4219 
4220     if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4221         return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4222     }
4223 
4224     return -ENOTSUP;
4225 }
4226 
4227 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4228 {
4229     while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4230         bs = bs->file;
4231     }
4232 
4233     if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4234         return bs->drv->bdrv_debug_resume(bs, tag);
4235     }
4236 
4237     return -ENOTSUP;
4238 }
4239 
4240 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4241 {
4242     while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4243         bs = bs->file;
4244     }
4245 
4246     if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4247         return bs->drv->bdrv_debug_is_suspended(bs, tag);
4248     }
4249 
4250     return false;
4251 }
4252 
4253 int bdrv_is_snapshot(BlockDriverState *bs)
4254 {
4255     return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4256 }
4257 
4258 /* backing_file can either be relative, or absolute, or a protocol.  If it is
4259  * relative, it must be relative to the chain.  So, passing in bs->filename
4260  * from a BDS as backing_file should not be done, as that may be relative to
4261  * the CWD rather than the chain. */
4262 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4263         const char *backing_file)
4264 {
4265     char *filename_full = NULL;
4266     char *backing_file_full = NULL;
4267     char *filename_tmp = NULL;
4268     int is_protocol = 0;
4269     BlockDriverState *curr_bs = NULL;
4270     BlockDriverState *retval = NULL;
4271 
4272     if (!bs || !bs->drv || !backing_file) {
4273         return NULL;
4274     }
4275 
4276     filename_full     = g_malloc(PATH_MAX);
4277     backing_file_full = g_malloc(PATH_MAX);
4278     filename_tmp      = g_malloc(PATH_MAX);
4279 
4280     is_protocol = path_has_protocol(backing_file);
4281 
4282     for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4283 
4284         /* If either of the filename paths is actually a protocol, then
4285          * compare unmodified paths; otherwise make paths relative */
4286         if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4287             if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4288                 retval = curr_bs->backing_hd;
4289                 break;
4290             }
4291         } else {
4292             /* If not an absolute filename path, make it relative to the current
4293              * image's filename path */
4294             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4295                          backing_file);
4296 
4297             /* We are going to compare absolute pathnames */
4298             if (!realpath(filename_tmp, filename_full)) {
4299                 continue;
4300             }
4301 
4302             /* We need to make sure the backing filename we are comparing against
4303              * is relative to the current image filename (or absolute) */
4304             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4305                          curr_bs->backing_file);
4306 
4307             if (!realpath(filename_tmp, backing_file_full)) {
4308                 continue;
4309             }
4310 
4311             if (strcmp(backing_file_full, filename_full) == 0) {
4312                 retval = curr_bs->backing_hd;
4313                 break;
4314             }
4315         }
4316     }
4317 
4318     g_free(filename_full);
4319     g_free(backing_file_full);
4320     g_free(filename_tmp);
4321     return retval;
4322 }
4323 
4324 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4325 {
4326     if (!bs->drv) {
4327         return 0;
4328     }
4329 
4330     if (!bs->backing_hd) {
4331         return 0;
4332     }
4333 
4334     return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4335 }
4336 
4337 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4338 {
4339     BlockDriverState *curr_bs = NULL;
4340 
4341     if (!bs) {
4342         return NULL;
4343     }
4344 
4345     curr_bs = bs;
4346 
4347     while (curr_bs->backing_hd) {
4348         curr_bs = curr_bs->backing_hd;
4349     }
4350     return curr_bs;
4351 }
4352 
4353 /**************************************************************/
4354 /* async I/Os */
4355 
4356 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4357                                  QEMUIOVector *qiov, int nb_sectors,
4358                                  BlockDriverCompletionFunc *cb, void *opaque)
4359 {
4360     trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4361 
4362     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4363                                  cb, opaque, false);
4364 }
4365 
4366 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4367                                   QEMUIOVector *qiov, int nb_sectors,
4368                                   BlockDriverCompletionFunc *cb, void *opaque)
4369 {
4370     trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4371 
4372     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4373                                  cb, opaque, true);
4374 }
4375 
4376 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4377         int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4378         BlockDriverCompletionFunc *cb, void *opaque)
4379 {
4380     trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4381 
4382     return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4383                                  BDRV_REQ_ZERO_WRITE | flags,
4384                                  cb, opaque, true);
4385 }
4386 
4387 
4388 typedef struct MultiwriteCB {
4389     int error;
4390     int num_requests;
4391     int num_callbacks;
4392     struct {
4393         BlockDriverCompletionFunc *cb;
4394         void *opaque;
4395         QEMUIOVector *free_qiov;
4396     } callbacks[];
4397 } MultiwriteCB;
4398 
4399 static void multiwrite_user_cb(MultiwriteCB *mcb)
4400 {
4401     int i;
4402 
4403     for (i = 0; i < mcb->num_callbacks; i++) {
4404         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4405         if (mcb->callbacks[i].free_qiov) {
4406             qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4407         }
4408         g_free(mcb->callbacks[i].free_qiov);
4409     }
4410 }
4411 
4412 static void multiwrite_cb(void *opaque, int ret)
4413 {
4414     MultiwriteCB *mcb = opaque;
4415 
4416     trace_multiwrite_cb(mcb, ret);
4417 
4418     if (ret < 0 && !mcb->error) {
4419         mcb->error = ret;
4420     }
4421 
4422     mcb->num_requests--;
4423     if (mcb->num_requests == 0) {
4424         multiwrite_user_cb(mcb);
4425         g_free(mcb);
4426     }
4427 }
4428 
4429 static int multiwrite_req_compare(const void *a, const void *b)
4430 {
4431     const BlockRequest *req1 = a, *req2 = b;
4432 
4433     /*
4434      * Note that we can't simply subtract req2->sector from req1->sector
4435      * here as that could overflow the return value.
4436      */
4437     if (req1->sector > req2->sector) {
4438         return 1;
4439     } else if (req1->sector < req2->sector) {
4440         return -1;
4441     } else {
4442         return 0;
4443     }
4444 }
4445 
4446 /*
4447  * Takes a bunch of requests and tries to merge them. Returns the number of
4448  * requests that remain after merging.
4449  */
4450 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4451     int num_reqs, MultiwriteCB *mcb)
4452 {
4453     int i, outidx;
4454 
4455     // Sort requests by start sector
4456     qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4457 
4458     // Check if adjacent requests touch the same clusters. If so, combine them,
4459     // filling up gaps with zero sectors.
4460     outidx = 0;
4461     for (i = 1; i < num_reqs; i++) {
4462         int merge = 0;
4463         int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4464 
4465         // Handle exactly sequential writes and overlapping writes.
4466         if (reqs[i].sector <= oldreq_last) {
4467             merge = 1;
4468         }
4469 
4470         if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4471             merge = 0;
4472         }
4473 
4474         if (merge) {
4475             size_t size;
4476             QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4477             qemu_iovec_init(qiov,
4478                 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4479 
4480             // Add the first request to the merged one. If the requests are
4481             // overlapping, drop the last sectors of the first request.
4482             size = (reqs[i].sector - reqs[outidx].sector) << 9;
4483             qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4484 
4485             // We should need to add any zeros between the two requests
4486             assert (reqs[i].sector <= oldreq_last);
4487 
4488             // Add the second request
4489             qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4490 
4491             reqs[outidx].nb_sectors = qiov->size >> 9;
4492             reqs[outidx].qiov = qiov;
4493 
4494             mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4495         } else {
4496             outidx++;
4497             reqs[outidx].sector     = reqs[i].sector;
4498             reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4499             reqs[outidx].qiov       = reqs[i].qiov;
4500         }
4501     }
4502 
4503     return outidx + 1;
4504 }
4505 
4506 /*
4507  * Submit multiple AIO write requests at once.
4508  *
4509  * On success, the function returns 0 and all requests in the reqs array have
4510  * been submitted. In error case this function returns -1, and any of the
4511  * requests may or may not be submitted yet. In particular, this means that the
4512  * callback will be called for some of the requests, for others it won't. The
4513  * caller must check the error field of the BlockRequest to wait for the right
4514  * callbacks (if error != 0, no callback will be called).
4515  *
4516  * The implementation may modify the contents of the reqs array, e.g. to merge
4517  * requests. However, the fields opaque and error are left unmodified as they
4518  * are used to signal failure for a single request to the caller.
4519  */
4520 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4521 {
4522     MultiwriteCB *mcb;
4523     int i;
4524 
4525     /* don't submit writes if we don't have a medium */
4526     if (bs->drv == NULL) {
4527         for (i = 0; i < num_reqs; i++) {
4528             reqs[i].error = -ENOMEDIUM;
4529         }
4530         return -1;
4531     }
4532 
4533     if (num_reqs == 0) {
4534         return 0;
4535     }
4536 
4537     // Create MultiwriteCB structure
4538     mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4539     mcb->num_requests = 0;
4540     mcb->num_callbacks = num_reqs;
4541 
4542     for (i = 0; i < num_reqs; i++) {
4543         mcb->callbacks[i].cb = reqs[i].cb;
4544         mcb->callbacks[i].opaque = reqs[i].opaque;
4545     }
4546 
4547     // Check for mergable requests
4548     num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4549 
4550     trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4551 
4552     /* Run the aio requests. */
4553     mcb->num_requests = num_reqs;
4554     for (i = 0; i < num_reqs; i++) {
4555         bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4556                               reqs[i].nb_sectors, reqs[i].flags,
4557                               multiwrite_cb, mcb,
4558                               true);
4559     }
4560 
4561     return 0;
4562 }
4563 
4564 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4565 {
4566     acb->aiocb_info->cancel(acb);
4567 }
4568 
4569 /**************************************************************/
4570 /* async block device emulation */
4571 
4572 typedef struct BlockDriverAIOCBSync {
4573     BlockDriverAIOCB common;
4574     QEMUBH *bh;
4575     int ret;
4576     /* vector translation state */
4577     QEMUIOVector *qiov;
4578     uint8_t *bounce;
4579     int is_write;
4580 } BlockDriverAIOCBSync;
4581 
4582 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4583 {
4584     BlockDriverAIOCBSync *acb =
4585         container_of(blockacb, BlockDriverAIOCBSync, common);
4586     qemu_bh_delete(acb->bh);
4587     acb->bh = NULL;
4588     qemu_aio_release(acb);
4589 }
4590 
4591 static const AIOCBInfo bdrv_em_aiocb_info = {
4592     .aiocb_size         = sizeof(BlockDriverAIOCBSync),
4593     .cancel             = bdrv_aio_cancel_em,
4594 };
4595 
4596 static void bdrv_aio_bh_cb(void *opaque)
4597 {
4598     BlockDriverAIOCBSync *acb = opaque;
4599 
4600     if (!acb->is_write)
4601         qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4602     qemu_vfree(acb->bounce);
4603     acb->common.cb(acb->common.opaque, acb->ret);
4604     qemu_bh_delete(acb->bh);
4605     acb->bh = NULL;
4606     qemu_aio_release(acb);
4607 }
4608 
4609 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4610                                             int64_t sector_num,
4611                                             QEMUIOVector *qiov,
4612                                             int nb_sectors,
4613                                             BlockDriverCompletionFunc *cb,
4614                                             void *opaque,
4615                                             int is_write)
4616 
4617 {
4618     BlockDriverAIOCBSync *acb;
4619 
4620     acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4621     acb->is_write = is_write;
4622     acb->qiov = qiov;
4623     acb->bounce = qemu_blockalign(bs, qiov->size);
4624     acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4625 
4626     if (is_write) {
4627         qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4628         acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4629     } else {
4630         acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4631     }
4632 
4633     qemu_bh_schedule(acb->bh);
4634 
4635     return &acb->common;
4636 }
4637 
4638 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4639         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4640         BlockDriverCompletionFunc *cb, void *opaque)
4641 {
4642     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4643 }
4644 
4645 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4646         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4647         BlockDriverCompletionFunc *cb, void *opaque)
4648 {
4649     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4650 }
4651 
4652 
4653 typedef struct BlockDriverAIOCBCoroutine {
4654     BlockDriverAIOCB common;
4655     BlockRequest req;
4656     bool is_write;
4657     bool *done;
4658     QEMUBH* bh;
4659 } BlockDriverAIOCBCoroutine;
4660 
4661 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4662 {
4663     BlockDriverAIOCBCoroutine *acb =
4664         container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4665     bool done = false;
4666 
4667     acb->done = &done;
4668     while (!done) {
4669         qemu_aio_wait();
4670     }
4671 }
4672 
4673 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4674     .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
4675     .cancel             = bdrv_aio_co_cancel_em,
4676 };
4677 
4678 static void bdrv_co_em_bh(void *opaque)
4679 {
4680     BlockDriverAIOCBCoroutine *acb = opaque;
4681 
4682     acb->common.cb(acb->common.opaque, acb->req.error);
4683 
4684     if (acb->done) {
4685         *acb->done = true;
4686     }
4687 
4688     qemu_bh_delete(acb->bh);
4689     qemu_aio_release(acb);
4690 }
4691 
4692 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4693 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4694 {
4695     BlockDriverAIOCBCoroutine *acb = opaque;
4696     BlockDriverState *bs = acb->common.bs;
4697 
4698     if (!acb->is_write) {
4699         acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4700             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4701     } else {
4702         acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4703             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4704     }
4705 
4706     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4707     qemu_bh_schedule(acb->bh);
4708 }
4709 
4710 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4711                                                int64_t sector_num,
4712                                                QEMUIOVector *qiov,
4713                                                int nb_sectors,
4714                                                BdrvRequestFlags flags,
4715                                                BlockDriverCompletionFunc *cb,
4716                                                void *opaque,
4717                                                bool is_write)
4718 {
4719     Coroutine *co;
4720     BlockDriverAIOCBCoroutine *acb;
4721 
4722     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4723     acb->req.sector = sector_num;
4724     acb->req.nb_sectors = nb_sectors;
4725     acb->req.qiov = qiov;
4726     acb->req.flags = flags;
4727     acb->is_write = is_write;
4728     acb->done = NULL;
4729 
4730     co = qemu_coroutine_create(bdrv_co_do_rw);
4731     qemu_coroutine_enter(co, acb);
4732 
4733     return &acb->common;
4734 }
4735 
4736 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4737 {
4738     BlockDriverAIOCBCoroutine *acb = opaque;
4739     BlockDriverState *bs = acb->common.bs;
4740 
4741     acb->req.error = bdrv_co_flush(bs);
4742     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4743     qemu_bh_schedule(acb->bh);
4744 }
4745 
4746 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4747         BlockDriverCompletionFunc *cb, void *opaque)
4748 {
4749     trace_bdrv_aio_flush(bs, opaque);
4750 
4751     Coroutine *co;
4752     BlockDriverAIOCBCoroutine *acb;
4753 
4754     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4755     acb->done = NULL;
4756 
4757     co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4758     qemu_coroutine_enter(co, acb);
4759 
4760     return &acb->common;
4761 }
4762 
4763 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4764 {
4765     BlockDriverAIOCBCoroutine *acb = opaque;
4766     BlockDriverState *bs = acb->common.bs;
4767 
4768     acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4769     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4770     qemu_bh_schedule(acb->bh);
4771 }
4772 
4773 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4774         int64_t sector_num, int nb_sectors,
4775         BlockDriverCompletionFunc *cb, void *opaque)
4776 {
4777     Coroutine *co;
4778     BlockDriverAIOCBCoroutine *acb;
4779 
4780     trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4781 
4782     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4783     acb->req.sector = sector_num;
4784     acb->req.nb_sectors = nb_sectors;
4785     acb->done = NULL;
4786     co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4787     qemu_coroutine_enter(co, acb);
4788 
4789     return &acb->common;
4790 }
4791 
4792 void bdrv_init(void)
4793 {
4794     module_call_init(MODULE_INIT_BLOCK);
4795 }
4796 
4797 void bdrv_init_with_whitelist(void)
4798 {
4799     use_bdrv_whitelist = 1;
4800     bdrv_init();
4801 }
4802 
4803 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4804                    BlockDriverCompletionFunc *cb, void *opaque)
4805 {
4806     BlockDriverAIOCB *acb;
4807 
4808     acb = g_slice_alloc(aiocb_info->aiocb_size);
4809     acb->aiocb_info = aiocb_info;
4810     acb->bs = bs;
4811     acb->cb = cb;
4812     acb->opaque = opaque;
4813     return acb;
4814 }
4815 
4816 void qemu_aio_release(void *p)
4817 {
4818     BlockDriverAIOCB *acb = p;
4819     g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4820 }
4821 
4822 /**************************************************************/
4823 /* Coroutine block device emulation */
4824 
4825 typedef struct CoroutineIOCompletion {
4826     Coroutine *coroutine;
4827     int ret;
4828 } CoroutineIOCompletion;
4829 
4830 static void bdrv_co_io_em_complete(void *opaque, int ret)
4831 {
4832     CoroutineIOCompletion *co = opaque;
4833 
4834     co->ret = ret;
4835     qemu_coroutine_enter(co->coroutine, NULL);
4836 }
4837 
4838 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4839                                       int nb_sectors, QEMUIOVector *iov,
4840                                       bool is_write)
4841 {
4842     CoroutineIOCompletion co = {
4843         .coroutine = qemu_coroutine_self(),
4844     };
4845     BlockDriverAIOCB *acb;
4846 
4847     if (is_write) {
4848         acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4849                                        bdrv_co_io_em_complete, &co);
4850     } else {
4851         acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4852                                       bdrv_co_io_em_complete, &co);
4853     }
4854 
4855     trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4856     if (!acb) {
4857         return -EIO;
4858     }
4859     qemu_coroutine_yield();
4860 
4861     return co.ret;
4862 }
4863 
4864 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4865                                          int64_t sector_num, int nb_sectors,
4866                                          QEMUIOVector *iov)
4867 {
4868     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4869 }
4870 
4871 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4872                                          int64_t sector_num, int nb_sectors,
4873                                          QEMUIOVector *iov)
4874 {
4875     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4876 }
4877 
4878 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4879 {
4880     RwCo *rwco = opaque;
4881 
4882     rwco->ret = bdrv_co_flush(rwco->bs);
4883 }
4884 
4885 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4886 {
4887     int ret;
4888 
4889     if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4890         return 0;
4891     }
4892 
4893     /* Write back cached data to the OS even with cache=unsafe */
4894     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4895     if (bs->drv->bdrv_co_flush_to_os) {
4896         ret = bs->drv->bdrv_co_flush_to_os(bs);
4897         if (ret < 0) {
4898             return ret;
4899         }
4900     }
4901 
4902     /* But don't actually force it to the disk with cache=unsafe */
4903     if (bs->open_flags & BDRV_O_NO_FLUSH) {
4904         goto flush_parent;
4905     }
4906 
4907     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4908     if (bs->drv->bdrv_co_flush_to_disk) {
4909         ret = bs->drv->bdrv_co_flush_to_disk(bs);
4910     } else if (bs->drv->bdrv_aio_flush) {
4911         BlockDriverAIOCB *acb;
4912         CoroutineIOCompletion co = {
4913             .coroutine = qemu_coroutine_self(),
4914         };
4915 
4916         acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4917         if (acb == NULL) {
4918             ret = -EIO;
4919         } else {
4920             qemu_coroutine_yield();
4921             ret = co.ret;
4922         }
4923     } else {
4924         /*
4925          * Some block drivers always operate in either writethrough or unsafe
4926          * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4927          * know how the server works (because the behaviour is hardcoded or
4928          * depends on server-side configuration), so we can't ensure that
4929          * everything is safe on disk. Returning an error doesn't work because
4930          * that would break guests even if the server operates in writethrough
4931          * mode.
4932          *
4933          * Let's hope the user knows what he's doing.
4934          */
4935         ret = 0;
4936     }
4937     if (ret < 0) {
4938         return ret;
4939     }
4940 
4941     /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
4942      * in the case of cache=unsafe, so there are no useless flushes.
4943      */
4944 flush_parent:
4945     return bdrv_co_flush(bs->file);
4946 }
4947 
4948 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4949 {
4950     Error *local_err = NULL;
4951     int ret;
4952 
4953     if (!bs->drv)  {
4954         return;
4955     }
4956 
4957     if (bs->drv->bdrv_invalidate_cache) {
4958         bs->drv->bdrv_invalidate_cache(bs, &local_err);
4959     } else if (bs->file) {
4960         bdrv_invalidate_cache(bs->file, &local_err);
4961     }
4962     if (local_err) {
4963         error_propagate(errp, local_err);
4964         return;
4965     }
4966 
4967     ret = refresh_total_sectors(bs, bs->total_sectors);
4968     if (ret < 0) {
4969         error_setg_errno(errp, -ret, "Could not refresh total sector count");
4970         return;
4971     }
4972 }
4973 
4974 void bdrv_invalidate_cache_all(Error **errp)
4975 {
4976     BlockDriverState *bs;
4977     Error *local_err = NULL;
4978 
4979     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4980         bdrv_invalidate_cache(bs, &local_err);
4981         if (local_err) {
4982             error_propagate(errp, local_err);
4983             return;
4984         }
4985     }
4986 }
4987 
4988 void bdrv_clear_incoming_migration_all(void)
4989 {
4990     BlockDriverState *bs;
4991 
4992     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4993         bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4994     }
4995 }
4996 
4997 int bdrv_flush(BlockDriverState *bs)
4998 {
4999     Coroutine *co;
5000     RwCo rwco = {
5001         .bs = bs,
5002         .ret = NOT_DONE,
5003     };
5004 
5005     if (qemu_in_coroutine()) {
5006         /* Fast-path if already in coroutine context */
5007         bdrv_flush_co_entry(&rwco);
5008     } else {
5009         co = qemu_coroutine_create(bdrv_flush_co_entry);
5010         qemu_coroutine_enter(co, &rwco);
5011         while (rwco.ret == NOT_DONE) {
5012             qemu_aio_wait();
5013         }
5014     }
5015 
5016     return rwco.ret;
5017 }
5018 
5019 typedef struct DiscardCo {
5020     BlockDriverState *bs;
5021     int64_t sector_num;
5022     int nb_sectors;
5023     int ret;
5024 } DiscardCo;
5025 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5026 {
5027     DiscardCo *rwco = opaque;
5028 
5029     rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5030 }
5031 
5032 /* if no limit is specified in the BlockLimits use a default
5033  * of 32768 512-byte sectors (16 MiB) per request.
5034  */
5035 #define MAX_DISCARD_DEFAULT 32768
5036 
5037 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5038                                  int nb_sectors)
5039 {
5040     int max_discard;
5041 
5042     if (!bs->drv) {
5043         return -ENOMEDIUM;
5044     } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5045         return -EIO;
5046     } else if (bs->read_only) {
5047         return -EROFS;
5048     }
5049 
5050     bdrv_reset_dirty(bs, sector_num, nb_sectors);
5051 
5052     /* Do nothing if disabled.  */
5053     if (!(bs->open_flags & BDRV_O_UNMAP)) {
5054         return 0;
5055     }
5056 
5057     if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5058         return 0;
5059     }
5060 
5061     max_discard = bs->bl.max_discard ?  bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5062     while (nb_sectors > 0) {
5063         int ret;
5064         int num = nb_sectors;
5065 
5066         /* align request */
5067         if (bs->bl.discard_alignment &&
5068             num >= bs->bl.discard_alignment &&
5069             sector_num % bs->bl.discard_alignment) {
5070             if (num > bs->bl.discard_alignment) {
5071                 num = bs->bl.discard_alignment;
5072             }
5073             num -= sector_num % bs->bl.discard_alignment;
5074         }
5075 
5076         /* limit request size */
5077         if (num > max_discard) {
5078             num = max_discard;
5079         }
5080 
5081         if (bs->drv->bdrv_co_discard) {
5082             ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5083         } else {
5084             BlockDriverAIOCB *acb;
5085             CoroutineIOCompletion co = {
5086                 .coroutine = qemu_coroutine_self(),
5087             };
5088 
5089             acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5090                                             bdrv_co_io_em_complete, &co);
5091             if (acb == NULL) {
5092                 return -EIO;
5093             } else {
5094                 qemu_coroutine_yield();
5095                 ret = co.ret;
5096             }
5097         }
5098         if (ret && ret != -ENOTSUP) {
5099             return ret;
5100         }
5101 
5102         sector_num += num;
5103         nb_sectors -= num;
5104     }
5105     return 0;
5106 }
5107 
5108 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5109 {
5110     Coroutine *co;
5111     DiscardCo rwco = {
5112         .bs = bs,
5113         .sector_num = sector_num,
5114         .nb_sectors = nb_sectors,
5115         .ret = NOT_DONE,
5116     };
5117 
5118     if (qemu_in_coroutine()) {
5119         /* Fast-path if already in coroutine context */
5120         bdrv_discard_co_entry(&rwco);
5121     } else {
5122         co = qemu_coroutine_create(bdrv_discard_co_entry);
5123         qemu_coroutine_enter(co, &rwco);
5124         while (rwco.ret == NOT_DONE) {
5125             qemu_aio_wait();
5126         }
5127     }
5128 
5129     return rwco.ret;
5130 }
5131 
5132 /**************************************************************/
5133 /* removable device support */
5134 
5135 /**
5136  * Return TRUE if the media is present
5137  */
5138 int bdrv_is_inserted(BlockDriverState *bs)
5139 {
5140     BlockDriver *drv = bs->drv;
5141 
5142     if (!drv)
5143         return 0;
5144     if (!drv->bdrv_is_inserted)
5145         return 1;
5146     return drv->bdrv_is_inserted(bs);
5147 }
5148 
5149 /**
5150  * Return whether the media changed since the last call to this
5151  * function, or -ENOTSUP if we don't know.  Most drivers don't know.
5152  */
5153 int bdrv_media_changed(BlockDriverState *bs)
5154 {
5155     BlockDriver *drv = bs->drv;
5156 
5157     if (drv && drv->bdrv_media_changed) {
5158         return drv->bdrv_media_changed(bs);
5159     }
5160     return -ENOTSUP;
5161 }
5162 
5163 /**
5164  * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5165  */
5166 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5167 {
5168     BlockDriver *drv = bs->drv;
5169 
5170     if (drv && drv->bdrv_eject) {
5171         drv->bdrv_eject(bs, eject_flag);
5172     }
5173 
5174     if (bs->device_name[0] != '\0') {
5175         bdrv_emit_qmp_eject_event(bs, eject_flag);
5176     }
5177 }
5178 
5179 /**
5180  * Lock or unlock the media (if it is locked, the user won't be able
5181  * to eject it manually).
5182  */
5183 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5184 {
5185     BlockDriver *drv = bs->drv;
5186 
5187     trace_bdrv_lock_medium(bs, locked);
5188 
5189     if (drv && drv->bdrv_lock_medium) {
5190         drv->bdrv_lock_medium(bs, locked);
5191     }
5192 }
5193 
5194 /* needed for generic scsi interface */
5195 
5196 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5197 {
5198     BlockDriver *drv = bs->drv;
5199 
5200     if (drv && drv->bdrv_ioctl)
5201         return drv->bdrv_ioctl(bs, req, buf);
5202     return -ENOTSUP;
5203 }
5204 
5205 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5206         unsigned long int req, void *buf,
5207         BlockDriverCompletionFunc *cb, void *opaque)
5208 {
5209     BlockDriver *drv = bs->drv;
5210 
5211     if (drv && drv->bdrv_aio_ioctl)
5212         return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5213     return NULL;
5214 }
5215 
5216 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5217 {
5218     bs->guest_block_size = align;
5219 }
5220 
5221 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5222 {
5223     return qemu_memalign(bdrv_opt_mem_align(bs), size);
5224 }
5225 
5226 /*
5227  * Check if all memory in this vector is sector aligned.
5228  */
5229 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5230 {
5231     int i;
5232     size_t alignment = bdrv_opt_mem_align(bs);
5233 
5234     for (i = 0; i < qiov->niov; i++) {
5235         if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5236             return false;
5237         }
5238         if (qiov->iov[i].iov_len % alignment) {
5239             return false;
5240         }
5241     }
5242 
5243     return true;
5244 }
5245 
5246 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5247                                           Error **errp)
5248 {
5249     int64_t bitmap_size;
5250     BdrvDirtyBitmap *bitmap;
5251 
5252     assert((granularity & (granularity - 1)) == 0);
5253 
5254     granularity >>= BDRV_SECTOR_BITS;
5255     assert(granularity);
5256     bitmap_size = bdrv_getlength(bs);
5257     if (bitmap_size < 0) {
5258         error_setg_errno(errp, -bitmap_size, "could not get length of device");
5259         errno = -bitmap_size;
5260         return NULL;
5261     }
5262     bitmap_size >>= BDRV_SECTOR_BITS;
5263     bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5264     bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5265     QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5266     return bitmap;
5267 }
5268 
5269 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5270 {
5271     BdrvDirtyBitmap *bm, *next;
5272     QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5273         if (bm == bitmap) {
5274             QLIST_REMOVE(bitmap, list);
5275             hbitmap_free(bitmap->bitmap);
5276             g_free(bitmap);
5277             return;
5278         }
5279     }
5280 }
5281 
5282 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5283 {
5284     BdrvDirtyBitmap *bm;
5285     BlockDirtyInfoList *list = NULL;
5286     BlockDirtyInfoList **plist = &list;
5287 
5288     QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5289         BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5290         BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5291         info->count = bdrv_get_dirty_count(bs, bm);
5292         info->granularity =
5293             ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5294         entry->value = info;
5295         *plist = entry;
5296         plist = &entry->next;
5297     }
5298 
5299     return list;
5300 }
5301 
5302 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5303 {
5304     if (bitmap) {
5305         return hbitmap_get(bitmap->bitmap, sector);
5306     } else {
5307         return 0;
5308     }
5309 }
5310 
5311 void bdrv_dirty_iter_init(BlockDriverState *bs,
5312                           BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5313 {
5314     hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5315 }
5316 
5317 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5318                     int nr_sectors)
5319 {
5320     BdrvDirtyBitmap *bitmap;
5321     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5322         hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5323     }
5324 }
5325 
5326 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5327 {
5328     BdrvDirtyBitmap *bitmap;
5329     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5330         hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5331     }
5332 }
5333 
5334 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5335 {
5336     return hbitmap_count(bitmap->bitmap);
5337 }
5338 
5339 /* Get a reference to bs */
5340 void bdrv_ref(BlockDriverState *bs)
5341 {
5342     bs->refcnt++;
5343 }
5344 
5345 /* Release a previously grabbed reference to bs.
5346  * If after releasing, reference count is zero, the BlockDriverState is
5347  * deleted. */
5348 void bdrv_unref(BlockDriverState *bs)
5349 {
5350     assert(bs->refcnt > 0);
5351     if (--bs->refcnt == 0) {
5352         bdrv_delete(bs);
5353     }
5354 }
5355 
5356 struct BdrvOpBlocker {
5357     Error *reason;
5358     QLIST_ENTRY(BdrvOpBlocker) list;
5359 };
5360 
5361 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5362 {
5363     BdrvOpBlocker *blocker;
5364     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5365     if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5366         blocker = QLIST_FIRST(&bs->op_blockers[op]);
5367         if (errp) {
5368             error_setg(errp, "Device '%s' is busy: %s",
5369                        bs->device_name, error_get_pretty(blocker->reason));
5370         }
5371         return true;
5372     }
5373     return false;
5374 }
5375 
5376 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5377 {
5378     BdrvOpBlocker *blocker;
5379     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5380 
5381     blocker = g_malloc0(sizeof(BdrvOpBlocker));
5382     blocker->reason = reason;
5383     QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5384 }
5385 
5386 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5387 {
5388     BdrvOpBlocker *blocker, *next;
5389     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5390     QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5391         if (blocker->reason == reason) {
5392             QLIST_REMOVE(blocker, list);
5393             g_free(blocker);
5394         }
5395     }
5396 }
5397 
5398 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5399 {
5400     int i;
5401     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5402         bdrv_op_block(bs, i, reason);
5403     }
5404 }
5405 
5406 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5407 {
5408     int i;
5409     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5410         bdrv_op_unblock(bs, i, reason);
5411     }
5412 }
5413 
5414 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5415 {
5416     int i;
5417 
5418     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5419         if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5420             return false;
5421         }
5422     }
5423     return true;
5424 }
5425 
5426 void bdrv_iostatus_enable(BlockDriverState *bs)
5427 {
5428     bs->iostatus_enabled = true;
5429     bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5430 }
5431 
5432 /* The I/O status is only enabled if the drive explicitly
5433  * enables it _and_ the VM is configured to stop on errors */
5434 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5435 {
5436     return (bs->iostatus_enabled &&
5437            (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5438             bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
5439             bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5440 }
5441 
5442 void bdrv_iostatus_disable(BlockDriverState *bs)
5443 {
5444     bs->iostatus_enabled = false;
5445 }
5446 
5447 void bdrv_iostatus_reset(BlockDriverState *bs)
5448 {
5449     if (bdrv_iostatus_is_enabled(bs)) {
5450         bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5451         if (bs->job) {
5452             block_job_iostatus_reset(bs->job);
5453         }
5454     }
5455 }
5456 
5457 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5458 {
5459     assert(bdrv_iostatus_is_enabled(bs));
5460     if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5461         bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5462                                          BLOCK_DEVICE_IO_STATUS_FAILED;
5463     }
5464 }
5465 
5466 void
5467 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5468         enum BlockAcctType type)
5469 {
5470     assert(type < BDRV_MAX_IOTYPE);
5471 
5472     cookie->bytes = bytes;
5473     cookie->start_time_ns = get_clock();
5474     cookie->type = type;
5475 }
5476 
5477 void
5478 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5479 {
5480     assert(cookie->type < BDRV_MAX_IOTYPE);
5481 
5482     bs->nr_bytes[cookie->type] += cookie->bytes;
5483     bs->nr_ops[cookie->type]++;
5484     bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5485 }
5486 
5487 void bdrv_img_create(const char *filename, const char *fmt,
5488                      const char *base_filename, const char *base_fmt,
5489                      char *options, uint64_t img_size, int flags,
5490                      Error **errp, bool quiet)
5491 {
5492     QEMUOptionParameter *param = NULL, *create_options = NULL;
5493     QEMUOptionParameter *backing_fmt, *backing_file, *size;
5494     BlockDriver *drv, *proto_drv;
5495     BlockDriver *backing_drv = NULL;
5496     Error *local_err = NULL;
5497     int ret = 0;
5498 
5499     /* Find driver and parse its options */
5500     drv = bdrv_find_format(fmt);
5501     if (!drv) {
5502         error_setg(errp, "Unknown file format '%s'", fmt);
5503         return;
5504     }
5505 
5506     proto_drv = bdrv_find_protocol(filename, true);
5507     if (!proto_drv) {
5508         error_setg(errp, "Unknown protocol '%s'", filename);
5509         return;
5510     }
5511 
5512     create_options = append_option_parameters(create_options,
5513                                               drv->create_options);
5514     create_options = append_option_parameters(create_options,
5515                                               proto_drv->create_options);
5516 
5517     /* Create parameter list with default values */
5518     param = parse_option_parameters("", create_options, param);
5519 
5520     set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5521 
5522     /* Parse -o options */
5523     if (options) {
5524         param = parse_option_parameters(options, create_options, param);
5525         if (param == NULL) {
5526             error_setg(errp, "Invalid options for file format '%s'.", fmt);
5527             goto out;
5528         }
5529     }
5530 
5531     if (base_filename) {
5532         if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5533                                  base_filename)) {
5534             error_setg(errp, "Backing file not supported for file format '%s'",
5535                        fmt);
5536             goto out;
5537         }
5538     }
5539 
5540     if (base_fmt) {
5541         if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5542             error_setg(errp, "Backing file format not supported for file "
5543                              "format '%s'", fmt);
5544             goto out;
5545         }
5546     }
5547 
5548     backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5549     if (backing_file && backing_file->value.s) {
5550         if (!strcmp(filename, backing_file->value.s)) {
5551             error_setg(errp, "Error: Trying to create an image with the "
5552                              "same filename as the backing file");
5553             goto out;
5554         }
5555     }
5556 
5557     backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5558     if (backing_fmt && backing_fmt->value.s) {
5559         backing_drv = bdrv_find_format(backing_fmt->value.s);
5560         if (!backing_drv) {
5561             error_setg(errp, "Unknown backing file format '%s'",
5562                        backing_fmt->value.s);
5563             goto out;
5564         }
5565     }
5566 
5567     // The size for the image must always be specified, with one exception:
5568     // If we are using a backing file, we can obtain the size from there
5569     size = get_option_parameter(param, BLOCK_OPT_SIZE);
5570     if (size && size->value.n == -1) {
5571         if (backing_file && backing_file->value.s) {
5572             BlockDriverState *bs;
5573             uint64_t size;
5574             char buf[32];
5575             int back_flags;
5576 
5577             /* backing files always opened read-only */
5578             back_flags =
5579                 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5580 
5581             bs = NULL;
5582             ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5583                             backing_drv, &local_err);
5584             if (ret < 0) {
5585                 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5586                                  backing_file->value.s,
5587                                  error_get_pretty(local_err));
5588                 error_free(local_err);
5589                 local_err = NULL;
5590                 goto out;
5591             }
5592             bdrv_get_geometry(bs, &size);
5593             size *= 512;
5594 
5595             snprintf(buf, sizeof(buf), "%" PRId64, size);
5596             set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5597 
5598             bdrv_unref(bs);
5599         } else {
5600             error_setg(errp, "Image creation needs a size parameter");
5601             goto out;
5602         }
5603     }
5604 
5605     if (!quiet) {
5606         printf("Formatting '%s', fmt=%s ", filename, fmt);
5607         print_option_parameters(param);
5608         puts("");
5609     }
5610     ret = bdrv_create(drv, filename, param, &local_err);
5611     if (ret == -EFBIG) {
5612         /* This is generally a better message than whatever the driver would
5613          * deliver (especially because of the cluster_size_hint), since that
5614          * is most probably not much different from "image too large". */
5615         const char *cluster_size_hint = "";
5616         if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5617             cluster_size_hint = " (try using a larger cluster size)";
5618         }
5619         error_setg(errp, "The image size is too large for file format '%s'"
5620                    "%s", fmt, cluster_size_hint);
5621         error_free(local_err);
5622         local_err = NULL;
5623     }
5624 
5625 out:
5626     free_option_parameters(create_options);
5627     free_option_parameters(param);
5628 
5629     if (local_err) {
5630         error_propagate(errp, local_err);
5631     }
5632 }
5633 
5634 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5635 {
5636     /* Currently BlockDriverState always uses the main loop AioContext */
5637     return qemu_get_aio_context();
5638 }
5639 
5640 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5641                                     NotifierWithReturn *notifier)
5642 {
5643     notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5644 }
5645 
5646 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5647 {
5648     if (bs->drv->bdrv_amend_options == NULL) {
5649         return -ENOTSUP;
5650     }
5651     return bs->drv->bdrv_amend_options(bs, options);
5652 }
5653 
5654 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5655  * of block filter and by bdrv_is_first_non_filter.
5656  * It is used to test if the given bs is the candidate or recurse more in the
5657  * node graph.
5658  */
5659 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5660                                       BlockDriverState *candidate)
5661 {
5662     /* return false if basic checks fails */
5663     if (!bs || !bs->drv) {
5664         return false;
5665     }
5666 
5667     /* the code reached a non block filter driver -> check if the bs is
5668      * the same as the candidate. It's the recursion termination condition.
5669      */
5670     if (!bs->drv->is_filter) {
5671         return bs == candidate;
5672     }
5673     /* Down this path the driver is a block filter driver */
5674 
5675     /* If the block filter recursion method is defined use it to recurse down
5676      * the node graph.
5677      */
5678     if (bs->drv->bdrv_recurse_is_first_non_filter) {
5679         return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5680     }
5681 
5682     /* the driver is a block filter but don't allow to recurse -> return false
5683      */
5684     return false;
5685 }
5686 
5687 /* This function checks if the candidate is the first non filter bs down it's
5688  * bs chain. Since we don't have pointers to parents it explore all bs chains
5689  * from the top. Some filters can choose not to pass down the recursion.
5690  */
5691 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5692 {
5693     BlockDriverState *bs;
5694 
5695     /* walk down the bs forest recursively */
5696     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5697         bool perm;
5698 
5699         /* try to recurse in this top level bs */
5700         perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5701 
5702         /* candidate is the first non filter */
5703         if (perm) {
5704             return true;
5705         }
5706     }
5707 
5708     return false;
5709 }
5710