xref: /openbmc/qemu/block.c (revision 69c98726537627e708abb8fcb33e3a2b10e40bf1)

/*
 * QEMU System Emulator block driver
 *
 * Copyright (c) 2003 Fabrice Bellard
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#include "config-host.h"
#include "qemu-common.h"
#include "trace.h"
#include "monitor/monitor.h"
#include "block/block_int.h"
#include "block/blockjob.h"
#include "qemu/module.h"
#include "qapi/qmp/qjson.h"
#include "sysemu/sysemu.h"
#include "qemu/notify.h"
#include "block/coroutine.h"
#include "qmp-commands.h"
#include "qemu/timer.h"

#ifdef CONFIG_BSD
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/queue.h>
#ifndef __DragonFly__
#include <sys/disk.h>
#endif
#endif

#ifdef _WIN32
#include <windows.h>
#endif

#define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */

typedef enum {
    BDRV_REQ_COPY_ON_READ = 0x1,
    BDRV_REQ_ZERO_WRITE   = 0x2,
} BdrvRequestFlags;

static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
        BlockDriverCompletionFunc *cb, void *opaque);
static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
        BlockDriverCompletionFunc *cb, void *opaque);
static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
                                         int64_t sector_num, int nb_sectors,
                                         QEMUIOVector *iov);
static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
                                         int64_t sector_num, int nb_sectors,
                                         QEMUIOVector *iov);
static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
    BdrvRequestFlags flags);
static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
    BdrvRequestFlags flags);
static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
                                               int64_t sector_num,
                                               QEMUIOVector *qiov,
                                               int nb_sectors,
                                               BlockDriverCompletionFunc *cb,
                                               void *opaque,
                                               bool is_write);
static void coroutine_fn bdrv_co_do_rw(void *opaque);
static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors);

static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
        bool is_write, double elapsed_time, uint64_t *wait);
static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
        double elapsed_time, uint64_t *wait);
static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
        bool is_write, int64_t *wait);

static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
    QTAILQ_HEAD_INITIALIZER(bdrv_states);

static QLIST_HEAD(, BlockDriver) bdrv_drivers =
    QLIST_HEAD_INITIALIZER(bdrv_drivers);

/* If non-zero, use only whitelisted block drivers */
static int use_bdrv_whitelist;

#ifdef _WIN32
static int is_windows_drive_prefix(const char *filename)
{
    return (((filename[0] >= 'a' && filename[0] <= 'z') ||
             (filename[0] >= 'A' && filename[0] <= 'Z')) &&
            filename[1] == ':');
}

int is_windows_drive(const char *filename)
{
    if (is_windows_drive_prefix(filename) &&
        filename[2] == '\0')
        return 1;
    if (strstart(filename, "\\\\.\\", NULL) ||
        strstart(filename, "//./", NULL))
        return 1;
    return 0;
}
#endif

/* throttling disk I/O limits */
void bdrv_io_limits_disable(BlockDriverState *bs)
{
    bs->io_limits_enabled = false;

    do {} while (qemu_co_enter_next(&bs->throttled_reqs));

    if (bs->block_timer) {
        timer_del(bs->block_timer);
        timer_free(bs->block_timer);
        bs->block_timer = NULL;
    }

    bs->slice_start = 0;
    bs->slice_end   = 0;
}

static void bdrv_block_timer(void *opaque)
{
    BlockDriverState *bs = opaque;

    qemu_co_enter_next(&bs->throttled_reqs);
}

void bdrv_io_limits_enable(BlockDriverState *bs)
{
    bs->block_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, bdrv_block_timer, bs);
    bs->io_limits_enabled = true;
}

bool bdrv_io_limits_enabled(BlockDriverState *bs)
{
    BlockIOLimit *io_limits = &bs->io_limits;
    return io_limits->bps[BLOCK_IO_LIMIT_READ]
         || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
         || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
         || io_limits->iops[BLOCK_IO_LIMIT_READ]
         || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
         || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
}

static void bdrv_io_limits_intercept(BlockDriverState *bs,
                                     bool is_write, int nb_sectors)
{
    int64_t wait_time = -1;

    if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
        qemu_co_queue_wait(&bs->throttled_reqs);
    }

    /* In fact, we hope to keep each request's timing, in FIFO mode. The next
     * throttled requests will not be dequeued until the current request is
     * allowed to be serviced. So if the current request still exceeds the
     * limits, it will be inserted to the head. All requests followed it will
     * be still in throttled_reqs queue.
     */

    while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
        timer_mod(bs->block_timer,
                       wait_time + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
        qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
    }

    qemu_co_queue_next(&bs->throttled_reqs);
}

/* check if the path starts with "<protocol>:" */
static int path_has_protocol(const char *path)
{
    const char *p;

#ifdef _WIN32
    if (is_windows_drive(path) ||
        is_windows_drive_prefix(path)) {
        return 0;
    }
    p = path + strcspn(path, ":/\\");
#else
    p = path + strcspn(path, ":/");
#endif

    return *p == ':';
}

int path_is_absolute(const char *path)
{
#ifdef _WIN32
    /* specific case for names like: "\\.\d:" */
    if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
        return 1;
    }
    return (*path == '/' || *path == '\\');
#else
    return (*path == '/');
#endif
}

/* if filename is absolute, just copy it to dest. Otherwise, build a
   path to it by considering it is relative to base_path. URL are
   supported. */
void path_combine(char *dest, int dest_size,
                  const char *base_path,
                  const char *filename)
{
    const char *p, *p1;
    int len;

    if (dest_size <= 0)
        return;
    if (path_is_absolute(filename)) {
        pstrcpy(dest, dest_size, filename);
    } else {
        p = strchr(base_path, ':');
        if (p)
            p++;
        else
            p = base_path;
        p1 = strrchr(base_path, '/');
#ifdef _WIN32
        {
            const char *p2;
            p2 = strrchr(base_path, '\\');
            if (!p1 || p2 > p1)
                p1 = p2;
        }
#endif
        if (p1)
            p1++;
        else
            p1 = base_path;
        if (p1 > p)
            p = p1;
        len = p - base_path;
        if (len > dest_size - 1)
            len = dest_size - 1;
        memcpy(dest, base_path, len);
        dest[len] = '\0';
        pstrcat(dest, dest_size, filename);
    }
}

void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
{
    if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
        pstrcpy(dest, sz, bs->backing_file);
    } else {
        path_combine(dest, sz, bs->filename, bs->backing_file);
    }
}

void bdrv_register(BlockDriver *bdrv)
{
    /* Block drivers without coroutine functions need emulation */
    if (!bdrv->bdrv_co_readv) {
        bdrv->bdrv_co_readv = bdrv_co_readv_em;
        bdrv->bdrv_co_writev = bdrv_co_writev_em;

        /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
         * the block driver lacks aio we need to emulate that too.
         */
        if (!bdrv->bdrv_aio_readv) {
            /* add AIO emulation layer */
            bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
            bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
        }
    }

    QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
}

/* create a new block device (by default it is empty) */
BlockDriverState *bdrv_new(const char *device_name)
{
    BlockDriverState *bs;

    bs = g_malloc0(sizeof(BlockDriverState));
    pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
    if (device_name[0] != '\0') {
        QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
    }
    bdrv_iostatus_disable(bs);
    notifier_list_init(&bs->close_notifiers);
    notifier_with_return_list_init(&bs->before_write_notifiers);
    qemu_co_queue_init(&bs->throttled_reqs);

    return bs;
}

void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
{
    notifier_list_add(&bs->close_notifiers, notify);
}

BlockDriver *bdrv_find_format(const char *format_name)
{
    BlockDriver *drv1;
    QLIST_FOREACH(drv1, &bdrv_drivers, list) {
        if (!strcmp(drv1->format_name, format_name)) {
            return drv1;
        }
    }
    return NULL;
}

static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
{
    static const char *whitelist_rw[] = {
        CONFIG_BDRV_RW_WHITELIST
    };
    static const char *whitelist_ro[] = {
        CONFIG_BDRV_RO_WHITELIST
    };
    const char **p;

    if (!whitelist_rw[0] && !whitelist_ro[0]) {
        return 1;               /* no whitelist, anything goes */
    }

    for (p = whitelist_rw; *p; p++) {
        if (!strcmp(drv->format_name, *p)) {
            return 1;
        }
    }
    if (read_only) {
        for (p = whitelist_ro; *p; p++) {
            if (!strcmp(drv->format_name, *p)) {
                return 1;
            }
        }
    }
    return 0;
}

BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
                                          bool read_only)
{
    BlockDriver *drv = bdrv_find_format(format_name);
    return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
}

typedef struct CreateCo {
    BlockDriver *drv;
    char *filename;
    QEMUOptionParameter *options;
    int ret;
} CreateCo;

static void coroutine_fn bdrv_create_co_entry(void *opaque)
{
    CreateCo *cco = opaque;
    assert(cco->drv);

    cco->ret = cco->drv->bdrv_create(cco->filename, cco->options);
}

int bdrv_create(BlockDriver *drv, const char* filename,
    QEMUOptionParameter *options)
{
    int ret;

    Coroutine *co;
    CreateCo cco = {
        .drv = drv,
        .filename = g_strdup(filename),
        .options = options,
        .ret = NOT_DONE,
    };

    if (!drv->bdrv_create) {
        ret = -ENOTSUP;
        goto out;
    }

    if (qemu_in_coroutine()) {
        /* Fast-path if already in coroutine context */
        bdrv_create_co_entry(&cco);
    } else {
        co = qemu_coroutine_create(bdrv_create_co_entry);
        qemu_coroutine_enter(co, &cco);
        while (cco.ret == NOT_DONE) {
            qemu_aio_wait();
        }
    }

    ret = cco.ret;

out:
    g_free(cco.filename);
    return ret;
}

int bdrv_create_file(const char* filename, QEMUOptionParameter *options)
{
    BlockDriver *drv;

    drv = bdrv_find_protocol(filename, true);
    if (drv == NULL) {
        return -ENOENT;
    }

    return bdrv_create(drv, filename, options);
}

/*
 * Create a uniquely-named empty temporary file.
 * Return 0 upon success, otherwise a negative errno value.
 */
int get_tmp_filename(char *filename, int size)
{
#ifdef _WIN32
    char temp_dir[MAX_PATH];
    /* GetTempFileName requires that its output buffer (4th param)
       have length MAX_PATH or greater.  */
    assert(size >= MAX_PATH);
    return (GetTempPath(MAX_PATH, temp_dir)
            && GetTempFileName(temp_dir, "qem", 0, filename)
            ? 0 : -GetLastError());
#else
    int fd;
    const char *tmpdir;
    tmpdir = getenv("TMPDIR");
    if (!tmpdir)
        tmpdir = "/tmp";
    if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
        return -EOVERFLOW;
    }
    fd = mkstemp(filename);
    if (fd < 0) {
        return -errno;
    }
    if (close(fd) != 0) {
        unlink(filename);
        return -errno;
    }
    return 0;
#endif
}

/*
 * Detect host devices. By convention, /dev/cdrom[N] is always
 * recognized as a host CDROM.
 */
static BlockDriver *find_hdev_driver(const char *filename)
{
    int score_max = 0, score;
    BlockDriver *drv = NULL, *d;

    QLIST_FOREACH(d, &bdrv_drivers, list) {
        if (d->bdrv_probe_device) {
            score = d->bdrv_probe_device(filename);
            if (score > score_max) {
                score_max = score;
                drv = d;
            }
        }
    }

    return drv;
}

BlockDriver *bdrv_find_protocol(const char *filename,
                                bool allow_protocol_prefix)
{
    BlockDriver *drv1;
    char protocol[128];
    int len;
    const char *p;

    /* TODO Drivers without bdrv_file_open must be specified explicitly */

    /*
     * XXX(hch): we really should not let host device detection
     * override an explicit protocol specification, but moving this
     * later breaks access to device names with colons in them.
     * Thanks to the brain-dead persistent naming schemes on udev-
     * based Linux systems those actually are quite common.
     */
    drv1 = find_hdev_driver(filename);
    if (drv1) {
        return drv1;
    }

    if (!path_has_protocol(filename) || !allow_protocol_prefix) {
        return bdrv_find_format("file");
    }

    p = strchr(filename, ':');
    assert(p != NULL);
    len = p - filename;
    if (len > sizeof(protocol) - 1)
        len = sizeof(protocol) - 1;
    memcpy(protocol, filename, len);
    protocol[len] = '\0';
    QLIST_FOREACH(drv1, &bdrv_drivers, list) {
        if (drv1->protocol_name &&
            !strcmp(drv1->protocol_name, protocol)) {
            return drv1;
        }
    }
    return NULL;
}

static int find_image_format(BlockDriverState *bs, const char *filename,
                             BlockDriver **pdrv)
{
    int score, score_max;
    BlockDriver *drv1, *drv;
    uint8_t buf[2048];
    int ret = 0;

    /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
    if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
        drv = bdrv_find_format("raw");
        if (!drv) {
            ret = -ENOENT;
        }
        *pdrv = drv;
        return ret;
    }

    ret = bdrv_pread(bs, 0, buf, sizeof(buf));
    if (ret < 0) {
        *pdrv = NULL;
        return ret;
    }

    score_max = 0;
    drv = NULL;
    QLIST_FOREACH(drv1, &bdrv_drivers, list) {
        if (drv1->bdrv_probe) {
            score = drv1->bdrv_probe(buf, ret, filename);
            if (score > score_max) {
                score_max = score;
                drv = drv1;
            }
        }
    }
    if (!drv) {
        ret = -ENOENT;
    }
    *pdrv = drv;
    return ret;
}

/**
 * Set the current 'total_sectors' value
 */
static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
{
    BlockDriver *drv = bs->drv;

    /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
    if (bs->sg)
        return 0;

    /* query actual device if possible, otherwise just trust the hint */
    if (drv->bdrv_getlength) {
        int64_t length = drv->bdrv_getlength(bs);
        if (length < 0) {
            return length;
        }
        hint = length >> BDRV_SECTOR_BITS;
    }

    bs->total_sectors = hint;
    return 0;
}

/**
 * Set open flags for a given discard mode
 *
 * Return 0 on success, -1 if the discard mode was invalid.
 */
int bdrv_parse_discard_flags(const char *mode, int *flags)
{
    *flags &= ~BDRV_O_UNMAP;

    if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
        /* do nothing */
    } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
        *flags |= BDRV_O_UNMAP;
    } else {
        return -1;
    }

    return 0;
}

/**
 * Set open flags for a given cache mode
 *
 * Return 0 on success, -1 if the cache mode was invalid.
 */
int bdrv_parse_cache_flags(const char *mode, int *flags)
{
    *flags &= ~BDRV_O_CACHE_MASK;

    if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
        *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
    } else if (!strcmp(mode, "directsync")) {
        *flags |= BDRV_O_NOCACHE;
    } else if (!strcmp(mode, "writeback")) {
        *flags |= BDRV_O_CACHE_WB;
    } else if (!strcmp(mode, "unsafe")) {
        *flags |= BDRV_O_CACHE_WB;
        *flags |= BDRV_O_NO_FLUSH;
    } else if (!strcmp(mode, "writethrough")) {
        /* this is the default */
    } else {
        return -1;
    }

    return 0;
}

/**
 * The copy-on-read flag is actually a reference count so multiple users may
 * use the feature without worrying about clobbering its previous state.
 * Copy-on-read stays enabled until all users have called to disable it.
 */
void bdrv_enable_copy_on_read(BlockDriverState *bs)
{
    bs->copy_on_read++;
}

void bdrv_disable_copy_on_read(BlockDriverState *bs)
{
    assert(bs->copy_on_read > 0);
    bs->copy_on_read--;
}

static int bdrv_open_flags(BlockDriverState *bs, int flags)
{
    int open_flags = flags | BDRV_O_CACHE_WB;

    /*
     * Clear flags that are internal to the block layer before opening the
     * image.
     */
    open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);

    /*
     * Snapshots should be writable.
     */
    if (bs->is_temporary) {
        open_flags |= BDRV_O_RDWR;
    }

    return open_flags;
}

/*
 * Common part for opening disk images and files
 *
 * Removes all processed options from *options.
 */
static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
    QDict *options, int flags, BlockDriver *drv)
{
    int ret, open_flags;
    const char *filename;

    assert(drv != NULL);
    assert(bs->file == NULL);
    assert(options != NULL && bs->options != options);

    if (file != NULL) {
        filename = file->filename;
    } else {
        filename = qdict_get_try_str(options, "filename");
    }

    trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);

    /* bdrv_open() with directly using a protocol as drv. This layer is already
     * opened, so assign it to bs (while file becomes a closed BlockDriverState)
     * and return immediately. */
    if (file != NULL && drv->bdrv_file_open) {
        bdrv_swap(file, bs);
        return 0;
    }

    bs->open_flags = flags;
    bs->buffer_alignment = 512;
    bs->zero_beyond_eof = true;
    open_flags = bdrv_open_flags(bs, flags);
    bs->read_only = !(open_flags & BDRV_O_RDWR);

    if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
        return -ENOTSUP;
    }

    assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
    if (!bs->read_only && (flags & BDRV_O_COPY_ON_READ)) {
        bdrv_enable_copy_on_read(bs);
    }

    if (filename != NULL) {
        pstrcpy(bs->filename, sizeof(bs->filename), filename);
    } else {
        bs->filename[0] = '\0';
    }

    bs->drv = drv;
    bs->opaque = g_malloc0(drv->instance_size);

    bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);

    /* Open the image, either directly or using a protocol */
    if (drv->bdrv_file_open) {
        assert(file == NULL);
        assert(drv->bdrv_parse_filename || filename != NULL);
        ret = drv->bdrv_file_open(bs, options, open_flags);
    } else {
        if (file == NULL) {
            qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't use '%s' as a "
                          "block driver for the protocol level",
                          drv->format_name);
            ret = -EINVAL;
            goto free_and_fail;
        }
        bs->file = file;
        ret = drv->bdrv_open(bs, options, open_flags);
    }

    if (ret < 0) {
        goto free_and_fail;
    }

    ret = refresh_total_sectors(bs, bs->total_sectors);
    if (ret < 0) {
        goto free_and_fail;
    }

#ifndef _WIN32
    if (bs->is_temporary) {
        assert(filename != NULL);
        unlink(filename);
    }
#endif
    return 0;

free_and_fail:
    bs->file = NULL;
    g_free(bs->opaque);
    bs->opaque = NULL;
    bs->drv = NULL;
    return ret;
}

/*
 * Opens a file using a protocol (file, host_device, nbd, ...)
 *
 * options is a QDict of options to pass to the block drivers, or NULL for an
 * empty set of options. The reference to the QDict belongs to the block layer
 * after the call (even on failure), so if the caller intends to reuse the
 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
 */
int bdrv_file_open(BlockDriverState **pbs, const char *filename,
                   QDict *options, int flags)
{
    BlockDriverState *bs;
    BlockDriver *drv;
    const char *drvname;
    bool allow_protocol_prefix = false;
    int ret;

    /* NULL means an empty set of options */
    if (options == NULL) {
        options = qdict_new();
    }

    bs = bdrv_new("");
    bs->options = options;
    options = qdict_clone_shallow(options);

    /* Fetch the file name from the options QDict if necessary */
    if (!filename) {
        filename = qdict_get_try_str(options, "filename");
    } else if (filename && !qdict_haskey(options, "filename")) {
        qdict_put(options, "filename", qstring_from_str(filename));
        allow_protocol_prefix = true;
    } else {
        qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't specify 'file' and "
                      "'filename' options at the same time");
        ret = -EINVAL;
        goto fail;
    }

    /* Find the right block driver */
    drvname = qdict_get_try_str(options, "driver");
    if (drvname) {
        drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
        qdict_del(options, "driver");
    } else if (filename) {
        drv = bdrv_find_protocol(filename, allow_protocol_prefix);
        if (!drv) {
            qerror_report(ERROR_CLASS_GENERIC_ERROR, "Unknown protocol");
        }
    } else {
        qerror_report(ERROR_CLASS_GENERIC_ERROR,
                      "Must specify either driver or file");
        drv = NULL;
    }

    if (!drv) {
        ret = -ENOENT;
        goto fail;
    }

    /* Parse the filename and open it */
    if (drv->bdrv_parse_filename && filename) {
        Error *local_err = NULL;
        drv->bdrv_parse_filename(filename, options, &local_err);
        if (error_is_set(&local_err)) {
            qerror_report_err(local_err);
            error_free(local_err);
            ret = -EINVAL;
            goto fail;
        }
        qdict_del(options, "filename");
    } else if (!drv->bdrv_parse_filename && !filename) {
        qerror_report(ERROR_CLASS_GENERIC_ERROR,
                      "The '%s' block driver requires a file name",
                      drv->format_name);
        ret = -EINVAL;
        goto fail;
    }

    ret = bdrv_open_common(bs, NULL, options, flags, drv);
    if (ret < 0) {
        goto fail;
    }

    /* Check if any unknown options were used */
    if (qdict_size(options) != 0) {
        const QDictEntry *entry = qdict_first(options);
        qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block protocol '%s' doesn't "
                      "support the option '%s'",
                      drv->format_name, entry->key);
        ret = -EINVAL;
        goto fail;
    }
    QDECREF(options);

    bs->growable = 1;
    *pbs = bs;
    return 0;

fail:
    QDECREF(options);
    if (!bs->drv) {
        QDECREF(bs->options);
    }
    bdrv_delete(bs);
    return ret;
}

/*
 * Opens the backing file for a BlockDriverState if not yet open
 *
 * options is a QDict of options to pass to the block drivers, or NULL for an
 * empty set of options. The reference to the QDict is transferred to this
 * function (even on failure), so if the caller intends to reuse the dictionary,
 * it needs to use QINCREF() before calling bdrv_file_open.
 */
int bdrv_open_backing_file(BlockDriverState *bs, QDict *options)
{
    char backing_filename[PATH_MAX];
    int back_flags, ret;
    BlockDriver *back_drv = NULL;

    if (bs->backing_hd != NULL) {
        QDECREF(options);
        return 0;
    }

    /* NULL means an empty set of options */
    if (options == NULL) {
        options = qdict_new();
    }

    bs->open_flags &= ~BDRV_O_NO_BACKING;
    if (qdict_haskey(options, "file.filename")) {
        backing_filename[0] = '\0';
    } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
        QDECREF(options);
        return 0;
    }

    bs->backing_hd = bdrv_new("");
    bdrv_get_full_backing_filename(bs, backing_filename,
                                   sizeof(backing_filename));

    if (bs->backing_format[0] != '\0') {
        back_drv = bdrv_find_format(bs->backing_format);
    }

    /* backing files always opened read-only */
    back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT);

    ret = bdrv_open(bs->backing_hd,
                    *backing_filename ? backing_filename : NULL, options,
                    back_flags, back_drv);
    if (ret < 0) {
        bdrv_delete(bs->backing_hd);
        bs->backing_hd = NULL;
        bs->open_flags |= BDRV_O_NO_BACKING;
        return ret;
    }
    return 0;
}

static void extract_subqdict(QDict *src, QDict **dst, const char *start)
{
    const QDictEntry *entry, *next;
    const char *p;

    *dst = qdict_new();
    entry = qdict_first(src);

    while (entry != NULL) {
        next = qdict_next(src, entry);
        if (strstart(entry->key, start, &p)) {
            qobject_incref(entry->value);
            qdict_put_obj(*dst, p, entry->value);
            qdict_del(src, entry->key);
        }
        entry = next;
    }
}

/*
 * Opens a disk image (raw, qcow2, vmdk, ...)
 *
 * options is a QDict of options to pass to the block drivers, or NULL for an
 * empty set of options. The reference to the QDict belongs to the block layer
 * after the call (even on failure), so if the caller intends to reuse the
 * dictionary, it needs to use QINCREF() before calling bdrv_open.
 */
int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
              int flags, BlockDriver *drv)
{
    int ret;
    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
    char tmp_filename[PATH_MAX + 1];
    BlockDriverState *file = NULL;
    QDict *file_options = NULL;
    const char *drvname;

    /* NULL means an empty set of options */
    if (options == NULL) {
        options = qdict_new();
    }

    bs->options = options;
    options = qdict_clone_shallow(options);

    /* For snapshot=on, create a temporary qcow2 overlay */
    if (flags & BDRV_O_SNAPSHOT) {
        BlockDriverState *bs1;
        int64_t total_size;
        BlockDriver *bdrv_qcow2;
        QEMUOptionParameter *create_options;
        char backing_filename[PATH_MAX];

        if (qdict_size(options) != 0) {
            error_report("Can't use snapshot=on with driver-specific options");
            ret = -EINVAL;
            goto fail;
        }
        assert(filename != NULL);

        /* if snapshot, we create a temporary backing file and open it
           instead of opening 'filename' directly */

        /* if there is a backing file, use it */
        bs1 = bdrv_new("");
        ret = bdrv_open(bs1, filename, NULL, 0, drv);
        if (ret < 0) {
            bdrv_delete(bs1);
            goto fail;
        }
        total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;

        bdrv_delete(bs1);

        ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
        if (ret < 0) {
            goto fail;
        }

        /* Real path is meaningless for protocols */
        if (path_has_protocol(filename)) {
            snprintf(backing_filename, sizeof(backing_filename),
                     "%s", filename);
        } else if (!realpath(filename, backing_filename)) {
            ret = -errno;
            goto fail;
        }

        bdrv_qcow2 = bdrv_find_format("qcow2");
        create_options = parse_option_parameters("", bdrv_qcow2->create_options,
                                                 NULL);

        set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
        set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
                             backing_filename);
        if (drv) {
            set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
                drv->format_name);
        }

        ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options);
        free_option_parameters(create_options);
        if (ret < 0) {
            goto fail;
        }

        filename = tmp_filename;
        drv = bdrv_qcow2;
        bs->is_temporary = 1;
    }

    /* Open image file without format layer */
    if (flags & BDRV_O_RDWR) {
        flags |= BDRV_O_ALLOW_RDWR;
    }

    extract_subqdict(options, &file_options, "file.");

    ret = bdrv_file_open(&file, filename, file_options,
                         bdrv_open_flags(bs, flags | BDRV_O_UNMAP));
    if (ret < 0) {
        goto fail;
    }

    /* Find the right image format driver */
    drvname = qdict_get_try_str(options, "driver");
    if (drvname) {
        drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
        qdict_del(options, "driver");
    }

    if (!drv) {
        ret = find_image_format(file, filename, &drv);
    }

    if (!drv) {
        goto unlink_and_fail;
    }

    /* Open the image */
    ret = bdrv_open_common(bs, file, options, flags, drv);
    if (ret < 0) {
        goto unlink_and_fail;
    }

    if (bs->file != file) {
        bdrv_delete(file);
        file = NULL;
    }

    /* If there is a backing file, use it */
    if ((flags & BDRV_O_NO_BACKING) == 0) {
        QDict *backing_options;

        extract_subqdict(options, &backing_options, "backing.");
        ret = bdrv_open_backing_file(bs, backing_options);
        if (ret < 0) {
            goto close_and_fail;
        }
    }

    /* Check if any unknown options were used */
    if (qdict_size(options) != 0) {
        const QDictEntry *entry = qdict_first(options);
        qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by "
            "device '%s' doesn't support the option '%s'",
            drv->format_name, bs->device_name, entry->key);

        ret = -EINVAL;
        goto close_and_fail;
    }
    QDECREF(options);

    if (!bdrv_key_required(bs)) {
        bdrv_dev_change_media_cb(bs, true);
    }

    /* throttling disk I/O limits */
    if (bs->io_limits_enabled) {
        bdrv_io_limits_enable(bs);
    }

    return 0;

unlink_and_fail:
    if (file != NULL) {
        bdrv_delete(file);
    }
    if (bs->is_temporary) {
        unlink(filename);
    }
fail:
    QDECREF(bs->options);
    QDECREF(options);
    bs->options = NULL;
    return ret;

close_and_fail:
    bdrv_close(bs);
    QDECREF(options);
    return ret;
}

typedef struct BlockReopenQueueEntry {
     bool prepared;
     BDRVReopenState state;
     QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
} BlockReopenQueueEntry;

/*
 * Adds a BlockDriverState to a simple queue for an atomic, transactional
 * reopen of multiple devices.
 *
 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
 * already performed, or alternatively may be NULL a new BlockReopenQueue will
 * be created and initialized. This newly created BlockReopenQueue should be
 * passed back in for subsequent calls that are intended to be of the same
 * atomic 'set'.
 *
 * bs is the BlockDriverState to add to the reopen queue.
 *
 * flags contains the open flags for the associated bs
 *
 * returns a pointer to bs_queue, which is either the newly allocated
 * bs_queue, or the existing bs_queue being used.
 *
 */
BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
                                    BlockDriverState *bs, int flags)
{
    assert(bs != NULL);

    BlockReopenQueueEntry *bs_entry;
    if (bs_queue == NULL) {
        bs_queue = g_new0(BlockReopenQueue, 1);
        QSIMPLEQ_INIT(bs_queue);
    }

    if (bs->file) {
        bdrv_reopen_queue(bs_queue, bs->file, flags);
    }

    bs_entry = g_new0(BlockReopenQueueEntry, 1);
    QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);

    bs_entry->state.bs = bs;
    bs_entry->state.flags = flags;

    return bs_queue;
}

/*
 * Reopen multiple BlockDriverStates atomically & transactionally.
 *
 * The queue passed in (bs_queue) must have been built up previous
 * via bdrv_reopen_queue().
 *
 * Reopens all BDS specified in the queue, with the appropriate
 * flags.  All devices are prepared for reopen, and failure of any
 * device will cause all device changes to be abandonded, and intermediate
 * data cleaned up.
 *
 * If all devices prepare successfully, then the changes are committed
 * to all devices.
 *
 */
int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
{
    int ret = -1;
    BlockReopenQueueEntry *bs_entry, *next;
    Error *local_err = NULL;

    assert(bs_queue != NULL);

    bdrv_drain_all();

    QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
        if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
            error_propagate(errp, local_err);
            goto cleanup;
        }
        bs_entry->prepared = true;
    }

    /* If we reach this point, we have success and just need to apply the
     * changes
     */
    QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
        bdrv_reopen_commit(&bs_entry->state);
    }

    ret = 0;

cleanup:
    QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
        if (ret && bs_entry->prepared) {
            bdrv_reopen_abort(&bs_entry->state);
        }
        g_free(bs_entry);
    }
    g_free(bs_queue);
    return ret;
}


/* Reopen a single BlockDriverState with the specified flags. */
int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
{
    int ret = -1;
    Error *local_err = NULL;
    BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);

    ret = bdrv_reopen_multiple(queue, &local_err);
    if (local_err != NULL) {
        error_propagate(errp, local_err);
    }
    return ret;
}


/*
 * Prepares a BlockDriverState for reopen. All changes are staged in the
 * 'opaque' field of the BDRVReopenState, which is used and allocated by
 * the block driver layer .bdrv_reopen_prepare()
 *
 * bs is the BlockDriverState to reopen
 * flags are the new open flags
 * queue is the reopen queue
 *
 * Returns 0 on success, non-zero on error.  On error errp will be set
 * as well.
 *
 * On failure, bdrv_reopen_abort() will be called to clean up any data.
 * It is the responsibility of the caller to then call the abort() or
 * commit() for any other BDS that have been left in a prepare() state
 *
 */
int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
                        Error **errp)
{
    int ret = -1;
    Error *local_err = NULL;
    BlockDriver *drv;

    assert(reopen_state != NULL);
    assert(reopen_state->bs->drv != NULL);
    drv = reopen_state->bs->drv;

    /* if we are to stay read-only, do not allow permission change
     * to r/w */
    if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
        reopen_state->flags & BDRV_O_RDWR) {
        error_set(errp, QERR_DEVICE_IS_READ_ONLY,
                  reopen_state->bs->device_name);
        goto error;
    }


    ret = bdrv_flush(reopen_state->bs);
    if (ret) {
        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
                  strerror(-ret));
        goto error;
    }

    if (drv->bdrv_reopen_prepare) {
        ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
        if (ret) {
            if (local_err != NULL) {
                error_propagate(errp, local_err);
            } else {
                error_setg(errp, "failed while preparing to reopen image '%s'",
                           reopen_state->bs->filename);
            }
            goto error;
        }
    } else {
        /* It is currently mandatory to have a bdrv_reopen_prepare()
         * handler for each supported drv. */
        error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
                  drv->format_name, reopen_state->bs->device_name,
                 "reopening of file");
        ret = -1;
        goto error;
    }

    ret = 0;

error:
    return ret;
}

/*
 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
 * makes them final by swapping the staging BlockDriverState contents into
 * the active BlockDriverState contents.
 */
void bdrv_reopen_commit(BDRVReopenState *reopen_state)
{
    BlockDriver *drv;

    assert(reopen_state != NULL);
    drv = reopen_state->bs->drv;
    assert(drv != NULL);

    /* If there are any driver level actions to take */
    if (drv->bdrv_reopen_commit) {
        drv->bdrv_reopen_commit(reopen_state);
    }

    /* set BDS specific flags now */
    reopen_state->bs->open_flags         = reopen_state->flags;
    reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
                                              BDRV_O_CACHE_WB);
    reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
}

/*
 * Abort the reopen, and delete and free the staged changes in
 * reopen_state
 */
void bdrv_reopen_abort(BDRVReopenState *reopen_state)
{
    BlockDriver *drv;

    assert(reopen_state != NULL);
    drv = reopen_state->bs->drv;
    assert(drv != NULL);

    if (drv->bdrv_reopen_abort) {
        drv->bdrv_reopen_abort(reopen_state);
    }
}


void bdrv_close(BlockDriverState *bs)
{
    if (bs->job) {
        block_job_cancel_sync(bs->job);
    }
    bdrv_drain_all(); /* complete I/O */
    bdrv_flush(bs);
    bdrv_drain_all(); /* in case flush left pending I/O */
    notifier_list_notify(&bs->close_notifiers, bs);

    if (bs->drv) {
        if (bs->backing_hd) {
            bdrv_delete(bs->backing_hd);
            bs->backing_hd = NULL;
        }
        bs->drv->bdrv_close(bs);
        g_free(bs->opaque);
#ifdef _WIN32
        if (bs->is_temporary) {
            unlink(bs->filename);
        }
#endif
        bs->opaque = NULL;
        bs->drv = NULL;
        bs->copy_on_read = 0;
        bs->backing_file[0] = '\0';
        bs->backing_format[0] = '\0';
        bs->total_sectors = 0;
        bs->encrypted = 0;
        bs->valid_key = 0;
        bs->sg = 0;
        bs->growable = 0;
        bs->zero_beyond_eof = false;
        QDECREF(bs->options);
        bs->options = NULL;

        if (bs->file != NULL) {
            bdrv_delete(bs->file);
            bs->file = NULL;
        }
    }

    bdrv_dev_change_media_cb(bs, false);

    /*throttling disk I/O limits*/
    if (bs->io_limits_enabled) {
        bdrv_io_limits_disable(bs);
    }
}

void bdrv_close_all(void)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        bdrv_close(bs);
    }
}

/* Check if any requests are in-flight (including throttled requests) */
static bool bdrv_requests_pending(BlockDriverState *bs)
{
    if (!QLIST_EMPTY(&bs->tracked_requests)) {
        return true;
    }
    if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
        return true;
    }
    if (bs->file && bdrv_requests_pending(bs->file)) {
        return true;
    }
    if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
        return true;
    }
    return false;
}

static bool bdrv_requests_pending_all(void)
{
    BlockDriverState *bs;
    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        if (bdrv_requests_pending(bs)) {
            return true;
        }
    }
    return false;
}

/*
 * Wait for pending requests to complete across all BlockDriverStates
 *
 * This function does not flush data to disk, use bdrv_flush_all() for that
 * after calling this function.
 *
 * Note that completion of an asynchronous I/O operation can trigger any
 * number of other I/O operations on other devices---for example a coroutine
 * can be arbitrarily complex and a constant flow of I/O can come until the
 * coroutine is complete.  Because of this, it is not possible to have a
 * function to drain a single device's I/O queue.
 */
void bdrv_drain_all(void)
{
    /* Always run first iteration so any pending completion BHs run */
    bool busy = true;
    BlockDriverState *bs;

    while (busy) {
        /* FIXME: We do not have timer support here, so this is effectively
         * a busy wait.
         */
        QTAILQ_FOREACH(bs, &bdrv_states, list) {
            while (qemu_co_enter_next(&bs->throttled_reqs)) {
                busy = true;
            }
        }

        busy = bdrv_requests_pending_all();
        busy |= aio_poll(qemu_get_aio_context(), busy);
    }
}

/* make a BlockDriverState anonymous by removing from bdrv_state list.
   Also, NULL terminate the device_name to prevent double remove */
void bdrv_make_anon(BlockDriverState *bs)
{
    if (bs->device_name[0] != '\0') {
        QTAILQ_REMOVE(&bdrv_states, bs, list);
    }
    bs->device_name[0] = '\0';
}

static void bdrv_rebind(BlockDriverState *bs)
{
    if (bs->drv && bs->drv->bdrv_rebind) {
        bs->drv->bdrv_rebind(bs);
    }
}

static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
                                     BlockDriverState *bs_src)
{
    /* move some fields that need to stay attached to the device */
    bs_dest->open_flags         = bs_src->open_flags;

    /* dev info */
    bs_dest->dev_ops            = bs_src->dev_ops;
    bs_dest->dev_opaque         = bs_src->dev_opaque;
    bs_dest->dev                = bs_src->dev;
    bs_dest->buffer_alignment   = bs_src->buffer_alignment;
    bs_dest->copy_on_read       = bs_src->copy_on_read;

    bs_dest->enable_write_cache = bs_src->enable_write_cache;

    /* i/o timing parameters */
    bs_dest->slice_start        = bs_src->slice_start;
    bs_dest->slice_end          = bs_src->slice_end;
    bs_dest->slice_submitted    = bs_src->slice_submitted;
    bs_dest->io_limits          = bs_src->io_limits;
    bs_dest->throttled_reqs     = bs_src->throttled_reqs;
    bs_dest->block_timer        = bs_src->block_timer;
    bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;

    /* r/w error */
    bs_dest->on_read_error      = bs_src->on_read_error;
    bs_dest->on_write_error     = bs_src->on_write_error;

    /* i/o status */
    bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
    bs_dest->iostatus           = bs_src->iostatus;

    /* dirty bitmap */
    bs_dest->dirty_bitmap       = bs_src->dirty_bitmap;

    /* job */
    bs_dest->in_use             = bs_src->in_use;
    bs_dest->job                = bs_src->job;

    /* keep the same entry in bdrv_states */
    pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
            bs_src->device_name);
    bs_dest->list = bs_src->list;
}

/*
 * Swap bs contents for two image chains while they are live,
 * while keeping required fields on the BlockDriverState that is
 * actually attached to a device.
 *
 * This will modify the BlockDriverState fields, and swap contents
 * between bs_new and bs_old. Both bs_new and bs_old are modified.
 *
 * bs_new is required to be anonymous.
 *
 * This function does not create any image files.
 */
void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
{
    BlockDriverState tmp;

    /* bs_new must be anonymous and shouldn't have anything fancy enabled */
    assert(bs_new->device_name[0] == '\0');
    assert(bs_new->dirty_bitmap == NULL);
    assert(bs_new->job == NULL);
    assert(bs_new->dev == NULL);
    assert(bs_new->in_use == 0);
    assert(bs_new->io_limits_enabled == false);
    assert(bs_new->block_timer == NULL);

    tmp = *bs_new;
    *bs_new = *bs_old;
    *bs_old = tmp;

    /* there are some fields that should not be swapped, move them back */
    bdrv_move_feature_fields(&tmp, bs_old);
    bdrv_move_feature_fields(bs_old, bs_new);
    bdrv_move_feature_fields(bs_new, &tmp);

    /* bs_new shouldn't be in bdrv_states even after the swap!  */
    assert(bs_new->device_name[0] == '\0');

    /* Check a few fields that should remain attached to the device */
    assert(bs_new->dev == NULL);
    assert(bs_new->job == NULL);
    assert(bs_new->in_use == 0);
    assert(bs_new->io_limits_enabled == false);
    assert(bs_new->block_timer == NULL);

    bdrv_rebind(bs_new);
    bdrv_rebind(bs_old);
}

/*
 * Add new bs contents at the top of an image chain while the chain is
 * live, while keeping required fields on the top layer.
 *
 * This will modify the BlockDriverState fields, and swap contents
 * between bs_new and bs_top. Both bs_new and bs_top are modified.
 *
 * bs_new is required to be anonymous.
 *
 * This function does not create any image files.
 */
void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
{
    bdrv_swap(bs_new, bs_top);

    /* The contents of 'tmp' will become bs_top, as we are
     * swapping bs_new and bs_top contents. */
    bs_top->backing_hd = bs_new;
    bs_top->open_flags &= ~BDRV_O_NO_BACKING;
    pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
            bs_new->filename);
    pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
            bs_new->drv ? bs_new->drv->format_name : "");
}

void bdrv_delete(BlockDriverState *bs)
{
    assert(!bs->dev);
    assert(!bs->job);
    assert(!bs->in_use);

    bdrv_close(bs);

    /* remove from list, if necessary */
    bdrv_make_anon(bs);

    g_free(bs);
}

int bdrv_attach_dev(BlockDriverState *bs, void *dev)
/* TODO change to DeviceState *dev when all users are qdevified */
{
    if (bs->dev) {
        return -EBUSY;
    }
    bs->dev = dev;
    bdrv_iostatus_reset(bs);
    return 0;
}

/* TODO qdevified devices don't use this, remove when devices are qdevified */
void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
{
    if (bdrv_attach_dev(bs, dev) < 0) {
        abort();
    }
}

void bdrv_detach_dev(BlockDriverState *bs, void *dev)
/* TODO change to DeviceState *dev when all users are qdevified */
{
    assert(bs->dev == dev);
    bs->dev = NULL;
    bs->dev_ops = NULL;
    bs->dev_opaque = NULL;
    bs->buffer_alignment = 512;
}

/* TODO change to return DeviceState * when all users are qdevified */
void *bdrv_get_attached_dev(BlockDriverState *bs)
{
    return bs->dev;
}

void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
                      void *opaque)
{
    bs->dev_ops = ops;
    bs->dev_opaque = opaque;
}

void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
                               enum MonitorEvent ev,
                               BlockErrorAction action, bool is_read)
{
    QObject *data;
    const char *action_str;

    switch (action) {
    case BDRV_ACTION_REPORT:
        action_str = "report";
        break;
    case BDRV_ACTION_IGNORE:
        action_str = "ignore";
        break;
    case BDRV_ACTION_STOP:
        action_str = "stop";
        break;
    default:
        abort();
    }

    data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
                              bdrv->device_name,
                              action_str,
                              is_read ? "read" : "write");
    monitor_protocol_event(ev, data);

    qobject_decref(data);
}

static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
{
    QObject *data;

    data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
                              bdrv_get_device_name(bs), ejected);
    monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);

    qobject_decref(data);
}

static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
{
    if (bs->dev_ops && bs->dev_ops->change_media_cb) {
        bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
        bs->dev_ops->change_media_cb(bs->dev_opaque, load);
        if (tray_was_closed) {
            /* tray open */
            bdrv_emit_qmp_eject_event(bs, true);
        }
        if (load) {
            /* tray close */
            bdrv_emit_qmp_eject_event(bs, false);
        }
    }
}

bool bdrv_dev_has_removable_media(BlockDriverState *bs)
{
    return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
}

void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
{
    if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
        bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
    }
}

bool bdrv_dev_is_tray_open(BlockDriverState *bs)
{
    if (bs->dev_ops && bs->dev_ops->is_tray_open) {
        return bs->dev_ops->is_tray_open(bs->dev_opaque);
    }
    return false;
}

static void bdrv_dev_resize_cb(BlockDriverState *bs)
{
    if (bs->dev_ops && bs->dev_ops->resize_cb) {
        bs->dev_ops->resize_cb(bs->dev_opaque);
    }
}

bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
{
    if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
        return bs->dev_ops->is_medium_locked(bs->dev_opaque);
    }
    return false;
}

/*
 * Run consistency checks on an image
 *
 * Returns 0 if the check could be completed (it doesn't mean that the image is
 * free of errors) or -errno when an internal error occurred. The results of the
 * check are stored in res.
 */
int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
{
    if (bs->drv->bdrv_check == NULL) {
        return -ENOTSUP;
    }

    memset(res, 0, sizeof(*res));
    return bs->drv->bdrv_check(bs, res, fix);
}

#define COMMIT_BUF_SECTORS 2048

/* commit COW file into the raw image */
int bdrv_commit(BlockDriverState *bs)
{
    BlockDriver *drv = bs->drv;
    int64_t sector, total_sectors;
    int n, ro, open_flags;
    int ret = 0;
    uint8_t *buf;
    char filename[PATH_MAX];

    if (!drv)
        return -ENOMEDIUM;

    if (!bs->backing_hd) {
        return -ENOTSUP;
    }

    if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
        return -EBUSY;
    }

    ro = bs->backing_hd->read_only;
    /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
    pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
    open_flags =  bs->backing_hd->open_flags;

    if (ro) {
        if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
            return -EACCES;
        }
    }

    total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
    buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);

    for (sector = 0; sector < total_sectors; sector += n) {
        if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {

            if (bdrv_read(bs, sector, buf, n) != 0) {
                ret = -EIO;
                goto ro_cleanup;
            }

            if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
                ret = -EIO;
                goto ro_cleanup;
            }
        }
    }

    if (drv->bdrv_make_empty) {
        ret = drv->bdrv_make_empty(bs);
        bdrv_flush(bs);
    }

    /*
     * Make sure all data we wrote to the backing device is actually
     * stable on disk.
     */
    if (bs->backing_hd)
        bdrv_flush(bs->backing_hd);

ro_cleanup:
    g_free(buf);

    if (ro) {
        /* ignoring error return here */
        bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
    }

    return ret;
}

int bdrv_commit_all(void)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        if (bs->drv && bs->backing_hd) {
            int ret = bdrv_commit(bs);
            if (ret < 0) {
                return ret;
            }
        }
    }
    return 0;
}

/**
 * Remove an active request from the tracked requests list
 *
 * This function should be called when a tracked request is completing.
 */
static void tracked_request_end(BdrvTrackedRequest *req)
{
    QLIST_REMOVE(req, list);
    qemu_co_queue_restart_all(&req->wait_queue);
}

/**
 * Add an active request to the tracked requests list
 */
static void tracked_request_begin(BdrvTrackedRequest *req,
                                  BlockDriverState *bs,
                                  int64_t sector_num,
                                  int nb_sectors, bool is_write)
{
    *req = (BdrvTrackedRequest){
        .bs = bs,
        .sector_num = sector_num,
        .nb_sectors = nb_sectors,
        .is_write = is_write,
        .co = qemu_coroutine_self(),
    };

    qemu_co_queue_init(&req->wait_queue);

    QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
}

/**
 * Round a region to cluster boundaries
 */
void bdrv_round_to_clusters(BlockDriverState *bs,
                            int64_t sector_num, int nb_sectors,
                            int64_t *cluster_sector_num,
                            int *cluster_nb_sectors)
{
    BlockDriverInfo bdi;

    if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
        *cluster_sector_num = sector_num;
        *cluster_nb_sectors = nb_sectors;
    } else {
        int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
        *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
        *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
                                            nb_sectors, c);
    }
}

static bool tracked_request_overlaps(BdrvTrackedRequest *req,
                                     int64_t sector_num, int nb_sectors) {
    /*        aaaa   bbbb */
    if (sector_num >= req->sector_num + req->nb_sectors) {
        return false;
    }
    /* bbbb   aaaa        */
    if (req->sector_num >= sector_num + nb_sectors) {
        return false;
    }
    return true;
}

static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
        int64_t sector_num, int nb_sectors)
{
    BdrvTrackedRequest *req;
    int64_t cluster_sector_num;
    int cluster_nb_sectors;
    bool retry;

    /* If we touch the same cluster it counts as an overlap.  This guarantees
     * that allocating writes will be serialized and not race with each other
     * for the same cluster.  For example, in copy-on-read it ensures that the
     * CoR read and write operations are atomic and guest writes cannot
     * interleave between them.
     */
    bdrv_round_to_clusters(bs, sector_num, nb_sectors,
                           &cluster_sector_num, &cluster_nb_sectors);

    do {
        retry = false;
        QLIST_FOREACH(req, &bs->tracked_requests, list) {
            if (tracked_request_overlaps(req, cluster_sector_num,
                                         cluster_nb_sectors)) {
                /* Hitting this means there was a reentrant request, for
                 * example, a block driver issuing nested requests.  This must
                 * never happen since it means deadlock.
                 */
                assert(qemu_coroutine_self() != req->co);

                qemu_co_queue_wait(&req->wait_queue);
                retry = true;
                break;
            }
        }
    } while (retry);
}

/*
 * Return values:
 * 0        - success
 * -EINVAL  - backing format specified, but no file
 * -ENOSPC  - can't update the backing file because no space is left in the
 *            image file header
 * -ENOTSUP - format driver doesn't support changing the backing file
 */
int bdrv_change_backing_file(BlockDriverState *bs,
    const char *backing_file, const char *backing_fmt)
{
    BlockDriver *drv = bs->drv;
    int ret;

    /* Backing file format doesn't make sense without a backing file */
    if (backing_fmt && !backing_file) {
        return -EINVAL;
    }

    if (drv->bdrv_change_backing_file != NULL) {
        ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
    } else {
        ret = -ENOTSUP;
    }

    if (ret == 0) {
        pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
        pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
    }
    return ret;
}

/*
 * Finds the image layer in the chain that has 'bs' as its backing file.
 *
 * active is the current topmost image.
 *
 * Returns NULL if bs is not found in active's image chain,
 * or if active == bs.
 */
BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
                                    BlockDriverState *bs)
{
    BlockDriverState *overlay = NULL;
    BlockDriverState *intermediate;

    assert(active != NULL);
    assert(bs != NULL);

    /* if bs is the same as active, then by definition it has no overlay
     */
    if (active == bs) {
        return NULL;
    }

    intermediate = active;
    while (intermediate->backing_hd) {
        if (intermediate->backing_hd == bs) {
            overlay = intermediate;
            break;
        }
        intermediate = intermediate->backing_hd;
    }

    return overlay;
}

typedef struct BlkIntermediateStates {
    BlockDriverState *bs;
    QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
} BlkIntermediateStates;


/*
 * Drops images above 'base' up to and including 'top', and sets the image
 * above 'top' to have base as its backing file.
 *
 * Requires that the overlay to 'top' is opened r/w, so that the backing file
 * information in 'bs' can be properly updated.
 *
 * E.g., this will convert the following chain:
 * bottom <- base <- intermediate <- top <- active
 *
 * to
 *
 * bottom <- base <- active
 *
 * It is allowed for bottom==base, in which case it converts:
 *
 * base <- intermediate <- top <- active
 *
 * to
 *
 * base <- active
 *
 * Error conditions:
 *  if active == top, that is considered an error
 *
 */
int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
                           BlockDriverState *base)
{
    BlockDriverState *intermediate;
    BlockDriverState *base_bs = NULL;
    BlockDriverState *new_top_bs = NULL;
    BlkIntermediateStates *intermediate_state, *next;
    int ret = -EIO;

    QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
    QSIMPLEQ_INIT(&states_to_delete);

    if (!top->drv || !base->drv) {
        goto exit;
    }

    new_top_bs = bdrv_find_overlay(active, top);

    if (new_top_bs == NULL) {
        /* we could not find the image above 'top', this is an error */
        goto exit;
    }

    /* special case of new_top_bs->backing_hd already pointing to base - nothing
     * to do, no intermediate images */
    if (new_top_bs->backing_hd == base) {
        ret = 0;
        goto exit;
    }

    intermediate = top;

    /* now we will go down through the list, and add each BDS we find
     * into our deletion queue, until we hit the 'base'
     */
    while (intermediate) {
        intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
        intermediate_state->bs = intermediate;
        QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);

        if (intermediate->backing_hd == base) {
            base_bs = intermediate->backing_hd;
            break;
        }
        intermediate = intermediate->backing_hd;
    }
    if (base_bs == NULL) {
        /* something went wrong, we did not end at the base. safely
         * unravel everything, and exit with error */
        goto exit;
    }

    /* success - we can delete the intermediate states, and link top->base */
    ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
                                   base_bs->drv ? base_bs->drv->format_name : "");
    if (ret) {
        goto exit;
    }
    new_top_bs->backing_hd = base_bs;


    QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
        /* so that bdrv_close() does not recursively close the chain */
        intermediate_state->bs->backing_hd = NULL;
        bdrv_delete(intermediate_state->bs);
    }
    ret = 0;

exit:
    QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
        g_free(intermediate_state);
    }
    return ret;
}


static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
                                   size_t size)
{
    int64_t len;

    if (!bdrv_is_inserted(bs))
        return -ENOMEDIUM;

    if (bs->growable)
        return 0;

    len = bdrv_getlength(bs);

    if (offset < 0)
        return -EIO;

    if ((offset > len) || (len - offset < size))
        return -EIO;

    return 0;
}

static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
                              int nb_sectors)
{
    return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
                                   nb_sectors * BDRV_SECTOR_SIZE);
}

typedef struct RwCo {
    BlockDriverState *bs;
    int64_t sector_num;
    int nb_sectors;
    QEMUIOVector *qiov;
    bool is_write;
    int ret;
    BdrvRequestFlags flags;
} RwCo;

static void coroutine_fn bdrv_rw_co_entry(void *opaque)
{
    RwCo *rwco = opaque;

    if (!rwco->is_write) {
        rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
                                     rwco->nb_sectors, rwco->qiov,
                                     rwco->flags);
    } else {
        rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
                                      rwco->nb_sectors, rwco->qiov,
                                      rwco->flags);
    }
}

/*
 * Process a vectored synchronous request using coroutines
 */
static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
                       QEMUIOVector *qiov, bool is_write,
                       BdrvRequestFlags flags)
{
    Coroutine *co;
    RwCo rwco = {
        .bs = bs,
        .sector_num = sector_num,
        .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
        .qiov = qiov,
        .is_write = is_write,
        .ret = NOT_DONE,
        .flags = flags,
    };
    assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);

    /**
     * In sync call context, when the vcpu is blocked, this throttling timer
     * will not fire; so the I/O throttling function has to be disabled here
     * if it has been enabled.
     */
    if (bs->io_limits_enabled) {
        fprintf(stderr, "Disabling I/O throttling on '%s' due "
                        "to synchronous I/O.\n", bdrv_get_device_name(bs));
        bdrv_io_limits_disable(bs);
    }

    if (qemu_in_coroutine()) {
        /* Fast-path if already in coroutine context */
        bdrv_rw_co_entry(&rwco);
    } else {
        co = qemu_coroutine_create(bdrv_rw_co_entry);
        qemu_coroutine_enter(co, &rwco);
        while (rwco.ret == NOT_DONE) {
            qemu_aio_wait();
        }
    }
    return rwco.ret;
}

/*
 * Process a synchronous request using coroutines
 */
static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
                      int nb_sectors, bool is_write, BdrvRequestFlags flags)
{
    QEMUIOVector qiov;
    struct iovec iov = {
        .iov_base = (void *)buf,
        .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
    };

    qemu_iovec_init_external(&qiov, &iov, 1);
    return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
}

/* return < 0 if error. See bdrv_write() for the return codes */
int bdrv_read(BlockDriverState *bs, int64_t sector_num,
              uint8_t *buf, int nb_sectors)
{
    return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
}

/* Just like bdrv_read(), but with I/O throttling temporarily disabled */
int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
                          uint8_t *buf, int nb_sectors)
{
    bool enabled;
    int ret;

    enabled = bs->io_limits_enabled;
    bs->io_limits_enabled = false;
    ret = bdrv_read(bs, sector_num, buf, nb_sectors);
    bs->io_limits_enabled = enabled;
    return ret;
}

/* Return < 0 if error. Important errors are:
  -EIO         generic I/O error (may happen for all errors)
  -ENOMEDIUM   No media inserted.
  -EINVAL      Invalid sector number or nb_sectors
  -EACCES      Trying to write a read-only device
*/
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
               const uint8_t *buf, int nb_sectors)
{
    return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
}

int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
{
    return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
}

int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
{
    return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
                      BDRV_REQ_ZERO_WRITE);
}

int bdrv_pread(BlockDriverState *bs, int64_t offset,
               void *buf, int count1)
{
    uint8_t tmp_buf[BDRV_SECTOR_SIZE];
    int len, nb_sectors, count;
    int64_t sector_num;
    int ret;

    count = count1;
    /* first read to align to sector start */
    len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
    if (len > count)
        len = count;
    sector_num = offset >> BDRV_SECTOR_BITS;
    if (len > 0) {
        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
        memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
        count -= len;
        if (count == 0)
            return count1;
        sector_num++;
        buf += len;
    }

    /* read the sectors "in place" */
    nb_sectors = count >> BDRV_SECTOR_BITS;
    if (nb_sectors > 0) {
        if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
            return ret;
        sector_num += nb_sectors;
        len = nb_sectors << BDRV_SECTOR_BITS;
        buf += len;
        count -= len;
    }

    /* add data from the last sector */
    if (count > 0) {
        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
        memcpy(buf, tmp_buf, count);
    }
    return count1;
}

int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
{
    uint8_t tmp_buf[BDRV_SECTOR_SIZE];
    int len, nb_sectors, count;
    int64_t sector_num;
    int ret;

    count = qiov->size;

    /* first write to align to sector start */
    len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
    if (len > count)
        len = count;
    sector_num = offset >> BDRV_SECTOR_BITS;
    if (len > 0) {
        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
        qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
                          len);
        if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
        count -= len;
        if (count == 0)
            return qiov->size;
        sector_num++;
    }

    /* write the sectors "in place" */
    nb_sectors = count >> BDRV_SECTOR_BITS;
    if (nb_sectors > 0) {
        QEMUIOVector qiov_inplace;

        qemu_iovec_init(&qiov_inplace, qiov->niov);
        qemu_iovec_concat(&qiov_inplace, qiov, len,
                          nb_sectors << BDRV_SECTOR_BITS);
        ret = bdrv_writev(bs, sector_num, &qiov_inplace);
        qemu_iovec_destroy(&qiov_inplace);
        if (ret < 0) {
            return ret;
        }

        sector_num += nb_sectors;
        len = nb_sectors << BDRV_SECTOR_BITS;
        count -= len;
    }

    /* add data from the last sector */
    if (count > 0) {
        if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
        qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
        if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
            return ret;
    }
    return qiov->size;
}

int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
                const void *buf, int count1)
{
    QEMUIOVector qiov;
    struct iovec iov = {
        .iov_base   = (void *) buf,
        .iov_len    = count1,
    };

    qemu_iovec_init_external(&qiov, &iov, 1);
    return bdrv_pwritev(bs, offset, &qiov);
}

/*
 * Writes to the file and ensures that no writes are reordered across this
 * request (acts as a barrier)
 *
 * Returns 0 on success, -errno in error cases.
 */
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
    const void *buf, int count)
{
    int ret;

    ret = bdrv_pwrite(bs, offset, buf, count);
    if (ret < 0) {
        return ret;
    }

    /* No flush needed for cache modes that already do it */
    if (bs->enable_write_cache) {
        bdrv_flush(bs);
    }

    return 0;
}

static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
        int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
{
    /* Perform I/O through a temporary buffer so that users who scribble over
     * their read buffer while the operation is in progress do not end up
     * modifying the image file.  This is critical for zero-copy guest I/O
     * where anything might happen inside guest memory.
     */
    void *bounce_buffer;

    BlockDriver *drv = bs->drv;
    struct iovec iov;
    QEMUIOVector bounce_qiov;
    int64_t cluster_sector_num;
    int cluster_nb_sectors;
    size_t skip_bytes;
    int ret;

    /* Cover entire cluster so no additional backing file I/O is required when
     * allocating cluster in the image file.
     */
    bdrv_round_to_clusters(bs, sector_num, nb_sectors,
                           &cluster_sector_num, &cluster_nb_sectors);

    trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
                                   cluster_sector_num, cluster_nb_sectors);

    iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
    iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
    qemu_iovec_init_external(&bounce_qiov, &iov, 1);

    ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
                             &bounce_qiov);
    if (ret < 0) {
        goto err;
    }

    if (drv->bdrv_co_write_zeroes &&
        buffer_is_zero(bounce_buffer, iov.iov_len)) {
        ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
                                      cluster_nb_sectors);
    } else {
        /* This does not change the data on the disk, it is not necessary
         * to flush even in cache=writethrough mode.
         */
        ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
                                  &bounce_qiov);
    }

    if (ret < 0) {
        /* It might be okay to ignore write errors for guest requests.  If this
         * is a deliberate copy-on-read then we don't want to ignore the error.
         * Simply report it in all cases.
         */
        goto err;
    }

    skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
    qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
                        nb_sectors * BDRV_SECTOR_SIZE);

err:
    qemu_vfree(bounce_buffer);
    return ret;
}

/*
 * Handle a read request in coroutine context
 */
static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
    BdrvRequestFlags flags)
{
    BlockDriver *drv = bs->drv;
    BdrvTrackedRequest req;
    int ret;

    if (!drv) {
        return -ENOMEDIUM;
    }
    if (bdrv_check_request(bs, sector_num, nb_sectors)) {
        return -EIO;
    }

    /* throttling disk read I/O */
    if (bs->io_limits_enabled) {
        bdrv_io_limits_intercept(bs, false, nb_sectors);
    }

    if (bs->copy_on_read) {
        flags |= BDRV_REQ_COPY_ON_READ;
    }
    if (flags & BDRV_REQ_COPY_ON_READ) {
        bs->copy_on_read_in_flight++;
    }

    if (bs->copy_on_read_in_flight) {
        wait_for_overlapping_requests(bs, sector_num, nb_sectors);
    }

    tracked_request_begin(&req, bs, sector_num, nb_sectors, false);

    if (flags & BDRV_REQ_COPY_ON_READ) {
        int pnum;

        ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
        if (ret < 0) {
            goto out;
        }

        if (!ret || pnum != nb_sectors) {
            ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
            goto out;
        }
    }

    if (!(bs->zero_beyond_eof && bs->growable)) {
        ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
    } else {
        /* Read zeros after EOF of growable BDSes */
        int64_t len, total_sectors, max_nb_sectors;

        len = bdrv_getlength(bs);
        if (len < 0) {
            ret = len;
            goto out;
        }

        total_sectors = len >> BDRV_SECTOR_BITS;
        max_nb_sectors = MAX(0, total_sectors - sector_num);
        if (max_nb_sectors > 0) {
            ret = drv->bdrv_co_readv(bs, sector_num,
                                     MIN(nb_sectors, max_nb_sectors), qiov);
        } else {
            ret = 0;
        }

        /* Reading beyond end of file is supposed to produce zeroes */
        if (ret == 0 && total_sectors < sector_num + nb_sectors) {
            uint64_t offset = MAX(0, total_sectors - sector_num);
            uint64_t bytes = (sector_num + nb_sectors - offset) *
                              BDRV_SECTOR_SIZE;
            qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
        }
    }

out:
    tracked_request_end(&req);

    if (flags & BDRV_REQ_COPY_ON_READ) {
        bs->copy_on_read_in_flight--;
    }

    return ret;
}

int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
    int nb_sectors, QEMUIOVector *qiov)
{
    trace_bdrv_co_readv(bs, sector_num, nb_sectors);

    return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
}

int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
{
    trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);

    return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
                            BDRV_REQ_COPY_ON_READ);
}

static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors)
{
    BlockDriver *drv = bs->drv;
    QEMUIOVector qiov;
    struct iovec iov;
    int ret;

    /* TODO Emulate only part of misaligned requests instead of letting block
     * drivers return -ENOTSUP and emulate everything */

    /* First try the efficient write zeroes operation */
    if (drv->bdrv_co_write_zeroes) {
        ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
        if (ret != -ENOTSUP) {
            return ret;
        }
    }

    /* Fall back to bounce buffer if write zeroes is unsupported */
    iov.iov_len  = nb_sectors * BDRV_SECTOR_SIZE;
    iov.iov_base = qemu_blockalign(bs, iov.iov_len);
    memset(iov.iov_base, 0, iov.iov_len);
    qemu_iovec_init_external(&qiov, &iov, 1);

    ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);

    qemu_vfree(iov.iov_base);
    return ret;
}

/*
 * Handle a write request in coroutine context
 */
static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
    int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
    BdrvRequestFlags flags)
{
    BlockDriver *drv = bs->drv;
    BdrvTrackedRequest req;
    int ret;

    if (!bs->drv) {
        return -ENOMEDIUM;
    }
    if (bs->read_only) {
        return -EACCES;
    }
    if (bdrv_check_request(bs, sector_num, nb_sectors)) {
        return -EIO;
    }

    /* throttling disk write I/O */
    if (bs->io_limits_enabled) {
        bdrv_io_limits_intercept(bs, true, nb_sectors);
    }

    if (bs->copy_on_read_in_flight) {
        wait_for_overlapping_requests(bs, sector_num, nb_sectors);
    }

    tracked_request_begin(&req, bs, sector_num, nb_sectors, true);

    ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);

    if (ret < 0) {
        /* Do nothing, write notifier decided to fail this request */
    } else if (flags & BDRV_REQ_ZERO_WRITE) {
        ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
    } else {
        ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
    }

    if (ret == 0 && !bs->enable_write_cache) {
        ret = bdrv_co_flush(bs);
    }

    if (bs->dirty_bitmap) {
        bdrv_set_dirty(bs, sector_num, nb_sectors);
    }

    if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
        bs->wr_highest_sector = sector_num + nb_sectors - 1;
    }

    tracked_request_end(&req);

    return ret;
}

int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
    int nb_sectors, QEMUIOVector *qiov)
{
    trace_bdrv_co_writev(bs, sector_num, nb_sectors);

    return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
}

int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
                                      int64_t sector_num, int nb_sectors)
{
    trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);

    return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
                             BDRV_REQ_ZERO_WRITE);
}

/**
 * Truncate file to 'offset' bytes (needed only for file protocols)
 */
int bdrv_truncate(BlockDriverState *bs, int64_t offset)
{
    BlockDriver *drv = bs->drv;
    int ret;
    if (!drv)
        return -ENOMEDIUM;
    if (!drv->bdrv_truncate)
        return -ENOTSUP;
    if (bs->read_only)
        return -EACCES;
    if (bdrv_in_use(bs))
        return -EBUSY;
    ret = drv->bdrv_truncate(bs, offset);
    if (ret == 0) {
        ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
        bdrv_dev_resize_cb(bs);
    }
    return ret;
}

/**
 * Length of a allocated file in bytes. Sparse files are counted by actual
 * allocated space. Return < 0 if error or unknown.
 */
int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
{
    BlockDriver *drv = bs->drv;
    if (!drv) {
        return -ENOMEDIUM;
    }
    if (drv->bdrv_get_allocated_file_size) {
        return drv->bdrv_get_allocated_file_size(bs);
    }
    if (bs->file) {
        return bdrv_get_allocated_file_size(bs->file);
    }
    return -ENOTSUP;
}

/**
 * Length of a file in bytes. Return < 0 if error or unknown.
 */
int64_t bdrv_getlength(BlockDriverState *bs)
{
    BlockDriver *drv = bs->drv;
    if (!drv)
        return -ENOMEDIUM;

    if (bs->growable || bdrv_dev_has_removable_media(bs)) {
        if (drv->bdrv_getlength) {
            return drv->bdrv_getlength(bs);
        }
    }
    return bs->total_sectors * BDRV_SECTOR_SIZE;
}

/* return 0 as number of sectors if no device present or error */
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
{
    int64_t length;
    length = bdrv_getlength(bs);
    if (length < 0)
        length = 0;
    else
        length = length >> BDRV_SECTOR_BITS;
    *nb_sectors_ptr = length;
}

/* throttling disk io limits */
void bdrv_set_io_limits(BlockDriverState *bs,
                        BlockIOLimit *io_limits)
{
    bs->io_limits = *io_limits;
    bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
}

void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
                       BlockdevOnError on_write_error)
{
    bs->on_read_error = on_read_error;
    bs->on_write_error = on_write_error;
}

BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
{
    return is_read ? bs->on_read_error : bs->on_write_error;
}

BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
{
    BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;

    switch (on_err) {
    case BLOCKDEV_ON_ERROR_ENOSPC:
        return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
    case BLOCKDEV_ON_ERROR_STOP:
        return BDRV_ACTION_STOP;
    case BLOCKDEV_ON_ERROR_REPORT:
        return BDRV_ACTION_REPORT;
    case BLOCKDEV_ON_ERROR_IGNORE:
        return BDRV_ACTION_IGNORE;
    default:
        abort();
    }
}

/* This is done by device models because, while the block layer knows
 * about the error, it does not know whether an operation comes from
 * the device or the block layer (from a job, for example).
 */
void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
                       bool is_read, int error)
{
    assert(error >= 0);
    bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
    if (action == BDRV_ACTION_STOP) {
        vm_stop(RUN_STATE_IO_ERROR);
        bdrv_iostatus_set_err(bs, error);
    }
}

int bdrv_is_read_only(BlockDriverState *bs)
{
    return bs->read_only;
}

int bdrv_is_sg(BlockDriverState *bs)
{
    return bs->sg;
}

int bdrv_enable_write_cache(BlockDriverState *bs)
{
    return bs->enable_write_cache;
}

void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
{
    bs->enable_write_cache = wce;

    /* so a reopen() will preserve wce */
    if (wce) {
        bs->open_flags |= BDRV_O_CACHE_WB;
    } else {
        bs->open_flags &= ~BDRV_O_CACHE_WB;
    }
}

int bdrv_is_encrypted(BlockDriverState *bs)
{
    if (bs->backing_hd && bs->backing_hd->encrypted)
        return 1;
    return bs->encrypted;
}

int bdrv_key_required(BlockDriverState *bs)
{
    BlockDriverState *backing_hd = bs->backing_hd;

    if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
        return 1;
    return (bs->encrypted && !bs->valid_key);
}

int bdrv_set_key(BlockDriverState *bs, const char *key)
{
    int ret;
    if (bs->backing_hd && bs->backing_hd->encrypted) {
        ret = bdrv_set_key(bs->backing_hd, key);
        if (ret < 0)
            return ret;
        if (!bs->encrypted)
            return 0;
    }
    if (!bs->encrypted) {
        return -EINVAL;
    } else if (!bs->drv || !bs->drv->bdrv_set_key) {
        return -ENOMEDIUM;
    }
    ret = bs->drv->bdrv_set_key(bs, key);
    if (ret < 0) {
        bs->valid_key = 0;
    } else if (!bs->valid_key) {
        bs->valid_key = 1;
        /* call the change callback now, we skipped it on open */
        bdrv_dev_change_media_cb(bs, true);
    }
    return ret;
}

const char *bdrv_get_format_name(BlockDriverState *bs)
{
    return bs->drv ? bs->drv->format_name : NULL;
}

void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
                         void *opaque)
{
    BlockDriver *drv;

    QLIST_FOREACH(drv, &bdrv_drivers, list) {
        it(opaque, drv->format_name);
    }
}

BlockDriverState *bdrv_find(const char *name)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        if (!strcmp(name, bs->device_name)) {
            return bs;
        }
    }
    return NULL;
}

BlockDriverState *bdrv_next(BlockDriverState *bs)
{
    if (!bs) {
        return QTAILQ_FIRST(&bdrv_states);
    }
    return QTAILQ_NEXT(bs, list);
}

void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        it(opaque, bs);
    }
}

const char *bdrv_get_device_name(BlockDriverState *bs)
{
    return bs->device_name;
}

int bdrv_get_flags(BlockDriverState *bs)
{
    return bs->open_flags;
}

int bdrv_flush_all(void)
{
    BlockDriverState *bs;
    int result = 0;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        int ret = bdrv_flush(bs);
        if (ret < 0 && !result) {
            result = ret;
        }
    }

    return result;
}

int bdrv_has_zero_init_1(BlockDriverState *bs)
{
    return 1;
}

int bdrv_has_zero_init(BlockDriverState *bs)
{
    assert(bs->drv);

    if (bs->drv->bdrv_has_zero_init) {
        return bs->drv->bdrv_has_zero_init(bs);
    }

    /* safe default */
    return 0;
}

typedef struct BdrvCoIsAllocatedData {
    BlockDriverState *bs;
    BlockDriverState *base;
    int64_t sector_num;
    int nb_sectors;
    int *pnum;
    int ret;
    bool done;
} BdrvCoIsAllocatedData;

/*
 * Returns true iff the specified sector is present in the disk image. Drivers
 * not implementing the functionality are assumed to not support backing files,
 * hence all their sectors are reported as allocated.
 *
 * If 'sector_num' is beyond the end of the disk image the return value is 0
 * and 'pnum' is set to 0.
 *
 * 'pnum' is set to the number of sectors (including and immediately following
 * the specified sector) that are known to be in the same
 * allocated/unallocated state.
 *
 * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
 * beyond the end of the disk image it will be clamped.
 */
int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
                                      int nb_sectors, int *pnum)
{
    int64_t n;

    if (sector_num >= bs->total_sectors) {
        *pnum = 0;
        return 0;
    }

    n = bs->total_sectors - sector_num;
    if (n < nb_sectors) {
        nb_sectors = n;
    }

    if (!bs->drv->bdrv_co_is_allocated) {
        *pnum = nb_sectors;
        return 1;
    }

    return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
}

/* Coroutine wrapper for bdrv_is_allocated() */
static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
{
    BdrvCoIsAllocatedData *data = opaque;
    BlockDriverState *bs = data->bs;

    data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
                                     data->pnum);
    data->done = true;
}

/*
 * Synchronous wrapper around bdrv_co_is_allocated().
 *
 * See bdrv_co_is_allocated() for details.
 */
int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
                      int *pnum)
{
    Coroutine *co;
    BdrvCoIsAllocatedData data = {
        .bs = bs,
        .sector_num = sector_num,
        .nb_sectors = nb_sectors,
        .pnum = pnum,
        .done = false,
    };

    co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
    qemu_coroutine_enter(co, &data);
    while (!data.done) {
        qemu_aio_wait();
    }
    return data.ret;
}

/*
 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
 *
 * Return true if the given sector is allocated in any image between
 * BASE and TOP (inclusive).  BASE can be NULL to check if the given
 * sector is allocated in any image of the chain.  Return false otherwise.
 *
 * 'pnum' is set to the number of sectors (including and immediately following
 *  the specified sector) that are known to be in the same
 *  allocated/unallocated state.
 *
 */
int coroutine_fn bdrv_co_is_allocated_above(BlockDriverState *top,
                                            BlockDriverState *base,
                                            int64_t sector_num,
                                            int nb_sectors, int *pnum)
{
    BlockDriverState *intermediate;
    int ret, n = nb_sectors;

    intermediate = top;
    while (intermediate && intermediate != base) {
        int pnum_inter;
        ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
                                   &pnum_inter);
        if (ret < 0) {
            return ret;
        } else if (ret) {
            *pnum = pnum_inter;
            return 1;
        }

        /*
         * [sector_num, nb_sectors] is unallocated on top but intermediate
         * might have
         *
         * [sector_num+x, nr_sectors] allocated.
         */
        if (n > pnum_inter &&
            (intermediate == top ||
             sector_num + pnum_inter < intermediate->total_sectors)) {
            n = pnum_inter;
        }

        intermediate = intermediate->backing_hd;
    }

    *pnum = n;
    return 0;
}

/* Coroutine wrapper for bdrv_is_allocated_above() */
static void coroutine_fn bdrv_is_allocated_above_co_entry(void *opaque)
{
    BdrvCoIsAllocatedData *data = opaque;
    BlockDriverState *top = data->bs;
    BlockDriverState *base = data->base;

    data->ret = bdrv_co_is_allocated_above(top, base, data->sector_num,
                                           data->nb_sectors, data->pnum);
    data->done = true;
}

/*
 * Synchronous wrapper around bdrv_co_is_allocated_above().
 *
 * See bdrv_co_is_allocated_above() for details.
 */
int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
                            int64_t sector_num, int nb_sectors, int *pnum)
{
    Coroutine *co;
    BdrvCoIsAllocatedData data = {
        .bs = top,
        .base = base,
        .sector_num = sector_num,
        .nb_sectors = nb_sectors,
        .pnum = pnum,
        .done = false,
    };

    co = qemu_coroutine_create(bdrv_is_allocated_above_co_entry);
    qemu_coroutine_enter(co, &data);
    while (!data.done) {
        qemu_aio_wait();
    }
    return data.ret;
}

const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
{
    if (bs->backing_hd && bs->backing_hd->encrypted)
        return bs->backing_file;
    else if (bs->encrypted)
        return bs->filename;
    else
        return NULL;
}

void bdrv_get_backing_filename(BlockDriverState *bs,
                               char *filename, int filename_size)
{
    pstrcpy(filename, filename_size, bs->backing_file);
}

int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
                          const uint8_t *buf, int nb_sectors)
{
    BlockDriver *drv = bs->drv;
    if (!drv)
        return -ENOMEDIUM;
    if (!drv->bdrv_write_compressed)
        return -ENOTSUP;
    if (bdrv_check_request(bs, sector_num, nb_sectors))
        return -EIO;

    assert(!bs->dirty_bitmap);

    return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
}

int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
    BlockDriver *drv = bs->drv;
    if (!drv)
        return -ENOMEDIUM;
    if (!drv->bdrv_get_info)
        return -ENOTSUP;
    memset(bdi, 0, sizeof(*bdi));
    return drv->bdrv_get_info(bs, bdi);
}

int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
                      int64_t pos, int size)
{
    QEMUIOVector qiov;
    struct iovec iov = {
        .iov_base   = (void *) buf,
        .iov_len    = size,
    };

    qemu_iovec_init_external(&qiov, &iov, 1);
    return bdrv_writev_vmstate(bs, &qiov, pos);
}

int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
{
    BlockDriver *drv = bs->drv;

    if (!drv) {
        return -ENOMEDIUM;
    } else if (drv->bdrv_save_vmstate) {
        return drv->bdrv_save_vmstate(bs, qiov, pos);
    } else if (bs->file) {
        return bdrv_writev_vmstate(bs->file, qiov, pos);
    }

    return -ENOTSUP;
}

int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
                      int64_t pos, int size)
{
    BlockDriver *drv = bs->drv;
    if (!drv)
        return -ENOMEDIUM;
    if (drv->bdrv_load_vmstate)
        return drv->bdrv_load_vmstate(bs, buf, pos, size);
    if (bs->file)
        return bdrv_load_vmstate(bs->file, buf, pos, size);
    return -ENOTSUP;
}

void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
{
    if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
        return;
    }

    bs->drv->bdrv_debug_event(bs, event);
}

int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
                          const char *tag)
{
    while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
        bs = bs->file;
    }

    if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
        return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
    }

    return -ENOTSUP;
}

int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
{
    while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
        bs = bs->file;
    }

    if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
        return bs->drv->bdrv_debug_resume(bs, tag);
    }

    return -ENOTSUP;
}

bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
{
    while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
        bs = bs->file;
    }

    if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
        return bs->drv->bdrv_debug_is_suspended(bs, tag);
    }

    return false;
}

int bdrv_is_snapshot(BlockDriverState *bs)
{
    return !!(bs->open_flags & BDRV_O_SNAPSHOT);
}

/* backing_file can either be relative, or absolute, or a protocol.  If it is
 * relative, it must be relative to the chain.  So, passing in bs->filename
 * from a BDS as backing_file should not be done, as that may be relative to
 * the CWD rather than the chain. */
BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
        const char *backing_file)
{
    char *filename_full = NULL;
    char *backing_file_full = NULL;
    char *filename_tmp = NULL;
    int is_protocol = 0;
    BlockDriverState *curr_bs = NULL;
    BlockDriverState *retval = NULL;

    if (!bs || !bs->drv || !backing_file) {
        return NULL;
    }

    filename_full     = g_malloc(PATH_MAX);
    backing_file_full = g_malloc(PATH_MAX);
    filename_tmp      = g_malloc(PATH_MAX);

    is_protocol = path_has_protocol(backing_file);

    for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {

        /* If either of the filename paths is actually a protocol, then
         * compare unmodified paths; otherwise make paths relative */
        if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
            if (strcmp(backing_file, curr_bs->backing_file) == 0) {
                retval = curr_bs->backing_hd;
                break;
            }
        } else {
            /* If not an absolute filename path, make it relative to the current
             * image's filename path */
            path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
                         backing_file);

            /* We are going to compare absolute pathnames */
            if (!realpath(filename_tmp, filename_full)) {
                continue;
            }

            /* We need to make sure the backing filename we are comparing against
             * is relative to the current image filename (or absolute) */
            path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
                         curr_bs->backing_file);

            if (!realpath(filename_tmp, backing_file_full)) {
                continue;
            }

            if (strcmp(backing_file_full, filename_full) == 0) {
                retval = curr_bs->backing_hd;
                break;
            }
        }
    }

    g_free(filename_full);
    g_free(backing_file_full);
    g_free(filename_tmp);
    return retval;
}

int bdrv_get_backing_file_depth(BlockDriverState *bs)
{
    if (!bs->drv) {
        return 0;
    }

    if (!bs->backing_hd) {
        return 0;
    }

    return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
}

BlockDriverState *bdrv_find_base(BlockDriverState *bs)
{
    BlockDriverState *curr_bs = NULL;

    if (!bs) {
        return NULL;
    }

    curr_bs = bs;

    while (curr_bs->backing_hd) {
        curr_bs = curr_bs->backing_hd;
    }
    return curr_bs;
}

/**************************************************************/
/* async I/Os */

BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
                                 QEMUIOVector *qiov, int nb_sectors,
                                 BlockDriverCompletionFunc *cb, void *opaque)
{
    trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);

    return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
                                 cb, opaque, false);
}

BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
                                  QEMUIOVector *qiov, int nb_sectors,
                                  BlockDriverCompletionFunc *cb, void *opaque)
{
    trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);

    return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
                                 cb, opaque, true);
}


typedef struct MultiwriteCB {
    int error;
    int num_requests;
    int num_callbacks;
    struct {
        BlockDriverCompletionFunc *cb;
        void *opaque;
        QEMUIOVector *free_qiov;
    } callbacks[];
} MultiwriteCB;

static void multiwrite_user_cb(MultiwriteCB *mcb)
{
    int i;

    for (i = 0; i < mcb->num_callbacks; i++) {
        mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
        if (mcb->callbacks[i].free_qiov) {
            qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
        }
        g_free(mcb->callbacks[i].free_qiov);
    }
}

static void multiwrite_cb(void *opaque, int ret)
{
    MultiwriteCB *mcb = opaque;

    trace_multiwrite_cb(mcb, ret);

    if (ret < 0 && !mcb->error) {
        mcb->error = ret;
    }

    mcb->num_requests--;
    if (mcb->num_requests == 0) {
        multiwrite_user_cb(mcb);
        g_free(mcb);
    }
}

static int multiwrite_req_compare(const void *a, const void *b)
{
    const BlockRequest *req1 = a, *req2 = b;

    /*
     * Note that we can't simply subtract req2->sector from req1->sector
     * here as that could overflow the return value.
     */
    if (req1->sector > req2->sector) {
        return 1;
    } else if (req1->sector < req2->sector) {
        return -1;
    } else {
        return 0;
    }
}

/*
 * Takes a bunch of requests and tries to merge them. Returns the number of
 * requests that remain after merging.
 */
static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
    int num_reqs, MultiwriteCB *mcb)
{
    int i, outidx;

    // Sort requests by start sector
    qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);

    // Check if adjacent requests touch the same clusters. If so, combine them,
    // filling up gaps with zero sectors.
    outidx = 0;
    for (i = 1; i < num_reqs; i++) {
        int merge = 0;
        int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;

        // Handle exactly sequential writes and overlapping writes.
        if (reqs[i].sector <= oldreq_last) {
            merge = 1;
        }

        if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
            merge = 0;
        }

        if (merge) {
            size_t size;
            QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
            qemu_iovec_init(qiov,
                reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);

            // Add the first request to the merged one. If the requests are
            // overlapping, drop the last sectors of the first request.
            size = (reqs[i].sector - reqs[outidx].sector) << 9;
            qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);

            // We should need to add any zeros between the two requests
            assert (reqs[i].sector <= oldreq_last);

            // Add the second request
            qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);

            reqs[outidx].nb_sectors = qiov->size >> 9;
            reqs[outidx].qiov = qiov;

            mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
        } else {
            outidx++;
            reqs[outidx].sector     = reqs[i].sector;
            reqs[outidx].nb_sectors = reqs[i].nb_sectors;
            reqs[outidx].qiov       = reqs[i].qiov;
        }
    }

    return outidx + 1;
}

/*
 * Submit multiple AIO write requests at once.
 *
 * On success, the function returns 0 and all requests in the reqs array have
 * been submitted. In error case this function returns -1, and any of the
 * requests may or may not be submitted yet. In particular, this means that the
 * callback will be called for some of the requests, for others it won't. The
 * caller must check the error field of the BlockRequest to wait for the right
 * callbacks (if error != 0, no callback will be called).
 *
 * The implementation may modify the contents of the reqs array, e.g. to merge
 * requests. However, the fields opaque and error are left unmodified as they
 * are used to signal failure for a single request to the caller.
 */
int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
{
    MultiwriteCB *mcb;
    int i;

    /* don't submit writes if we don't have a medium */
    if (bs->drv == NULL) {
        for (i = 0; i < num_reqs; i++) {
            reqs[i].error = -ENOMEDIUM;
        }
        return -1;
    }

    if (num_reqs == 0) {
        return 0;
    }

    // Create MultiwriteCB structure
    mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
    mcb->num_requests = 0;
    mcb->num_callbacks = num_reqs;

    for (i = 0; i < num_reqs; i++) {
        mcb->callbacks[i].cb = reqs[i].cb;
        mcb->callbacks[i].opaque = reqs[i].opaque;
    }

    // Check for mergable requests
    num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);

    trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);

    /* Run the aio requests. */
    mcb->num_requests = num_reqs;
    for (i = 0; i < num_reqs; i++) {
        bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
            reqs[i].nb_sectors, multiwrite_cb, mcb);
    }

    return 0;
}

void bdrv_aio_cancel(BlockDriverAIOCB *acb)
{
    acb->aiocb_info->cancel(acb);
}

/* block I/O throttling */
static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
                 bool is_write, double elapsed_time, uint64_t *wait)
{
    uint64_t bps_limit = 0;
    uint64_t extension;
    double   bytes_limit, bytes_base, bytes_res;
    double   slice_time, wait_time;

    if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
        bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
    } else if (bs->io_limits.bps[is_write]) {
        bps_limit = bs->io_limits.bps[is_write];
    } else {
        if (wait) {
            *wait = 0;
        }

        return false;
    }

    slice_time = bs->slice_end - bs->slice_start;
    slice_time /= (NANOSECONDS_PER_SECOND);
    bytes_limit = bps_limit * slice_time;
    bytes_base  = bs->slice_submitted.bytes[is_write];
    if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
        bytes_base += bs->slice_submitted.bytes[!is_write];
    }

    /* bytes_base: the bytes of data which have been read/written; and
     *             it is obtained from the history statistic info.
     * bytes_res: the remaining bytes of data which need to be read/written.
     * (bytes_base + bytes_res) / bps_limit: used to calcuate
     *             the total time for completing reading/writting all data.
     */
    bytes_res   = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;

    if (bytes_base + bytes_res <= bytes_limit) {
        if (wait) {
            *wait = 0;
        }

        return false;
    }

    /* Calc approx time to dispatch */
    wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;

    /* When the I/O rate at runtime exceeds the limits,
     * bs->slice_end need to be extended in order that the current statistic
     * info can be kept until the timer fire, so it is increased and tuned
     * based on the result of experiment.
     */
    extension = wait_time * NANOSECONDS_PER_SECOND;
    extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
                BLOCK_IO_SLICE_TIME;
    bs->slice_end += extension;
    if (wait) {
        *wait = wait_time * NANOSECONDS_PER_SECOND;
    }

    return true;
}

static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
                             double elapsed_time, uint64_t *wait)
{
    uint64_t iops_limit = 0;
    double   ios_limit, ios_base;
    double   slice_time, wait_time;

    if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
        iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
    } else if (bs->io_limits.iops[is_write]) {
        iops_limit = bs->io_limits.iops[is_write];
    } else {
        if (wait) {
            *wait = 0;
        }

        return false;
    }

    slice_time = bs->slice_end - bs->slice_start;
    slice_time /= (NANOSECONDS_PER_SECOND);
    ios_limit  = iops_limit * slice_time;
    ios_base   = bs->slice_submitted.ios[is_write];
    if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
        ios_base += bs->slice_submitted.ios[!is_write];
    }

    if (ios_base + 1 <= ios_limit) {
        if (wait) {
            *wait = 0;
        }

        return false;
    }

    /* Calc approx time to dispatch, in seconds */
    wait_time = (ios_base + 1) / iops_limit;
    if (wait_time > elapsed_time) {
        wait_time = wait_time - elapsed_time;
    } else {
        wait_time = 0;
    }

    /* Exceeded current slice, extend it by another slice time */
    bs->slice_end += BLOCK_IO_SLICE_TIME;
    if (wait) {
        *wait = wait_time * NANOSECONDS_PER_SECOND;
    }

    return true;
}

static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
                           bool is_write, int64_t *wait)
{
    int64_t  now, max_wait;
    uint64_t bps_wait = 0, iops_wait = 0;
    double   elapsed_time;
    int      bps_ret, iops_ret;

    now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
    if (now > bs->slice_end) {
        bs->slice_start = now;
        bs->slice_end   = now + BLOCK_IO_SLICE_TIME;
        memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
    }

    elapsed_time  = now - bs->slice_start;
    elapsed_time  /= (NANOSECONDS_PER_SECOND);

    bps_ret  = bdrv_exceed_bps_limits(bs, nb_sectors,
                                      is_write, elapsed_time, &bps_wait);
    iops_ret = bdrv_exceed_iops_limits(bs, is_write,
                                      elapsed_time, &iops_wait);
    if (bps_ret || iops_ret) {
        max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
        if (wait) {
            *wait = max_wait;
        }

        now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
        if (bs->slice_end < now + max_wait) {
            bs->slice_end = now + max_wait;
        }

        return true;
    }

    if (wait) {
        *wait = 0;
    }

    bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
                                           BDRV_SECTOR_SIZE;
    bs->slice_submitted.ios[is_write]++;

    return false;
}

/**************************************************************/
/* async block device emulation */

typedef struct BlockDriverAIOCBSync {
    BlockDriverAIOCB common;
    QEMUBH *bh;
    int ret;
    /* vector translation state */
    QEMUIOVector *qiov;
    uint8_t *bounce;
    int is_write;
} BlockDriverAIOCBSync;

static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
{
    BlockDriverAIOCBSync *acb =
        container_of(blockacb, BlockDriverAIOCBSync, common);
    qemu_bh_delete(acb->bh);
    acb->bh = NULL;
    qemu_aio_release(acb);
}

static const AIOCBInfo bdrv_em_aiocb_info = {
    .aiocb_size         = sizeof(BlockDriverAIOCBSync),
    .cancel             = bdrv_aio_cancel_em,
};

static void bdrv_aio_bh_cb(void *opaque)
{
    BlockDriverAIOCBSync *acb = opaque;

    if (!acb->is_write)
        qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
    qemu_vfree(acb->bounce);
    acb->common.cb(acb->common.opaque, acb->ret);
    qemu_bh_delete(acb->bh);
    acb->bh = NULL;
    qemu_aio_release(acb);
}

static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
                                            int64_t sector_num,
                                            QEMUIOVector *qiov,
                                            int nb_sectors,
                                            BlockDriverCompletionFunc *cb,
                                            void *opaque,
                                            int is_write)

{
    BlockDriverAIOCBSync *acb;

    acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
    acb->is_write = is_write;
    acb->qiov = qiov;
    acb->bounce = qemu_blockalign(bs, qiov->size);
    acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);

    if (is_write) {
        qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
        acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
    } else {
        acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
    }

    qemu_bh_schedule(acb->bh);

    return &acb->common;
}

static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
        BlockDriverCompletionFunc *cb, void *opaque)
{
    return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
}

static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
        BlockDriverCompletionFunc *cb, void *opaque)
{
    return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
}


typedef struct BlockDriverAIOCBCoroutine {
    BlockDriverAIOCB common;
    BlockRequest req;
    bool is_write;
    bool *done;
    QEMUBH* bh;
} BlockDriverAIOCBCoroutine;

static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
{
    BlockDriverAIOCBCoroutine *acb =
        container_of(blockacb, BlockDriverAIOCBCoroutine, common);
    bool done = false;

    acb->done = &done;
    while (!done) {
        qemu_aio_wait();
    }
}

static const AIOCBInfo bdrv_em_co_aiocb_info = {
    .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
    .cancel             = bdrv_aio_co_cancel_em,
};

static void bdrv_co_em_bh(void *opaque)
{
    BlockDriverAIOCBCoroutine *acb = opaque;

    acb->common.cb(acb->common.opaque, acb->req.error);

    if (acb->done) {
        *acb->done = true;
    }

    qemu_bh_delete(acb->bh);
    qemu_aio_release(acb);
}

/* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
static void coroutine_fn bdrv_co_do_rw(void *opaque)
{
    BlockDriverAIOCBCoroutine *acb = opaque;
    BlockDriverState *bs = acb->common.bs;

    if (!acb->is_write) {
        acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
            acb->req.nb_sectors, acb->req.qiov, 0);
    } else {
        acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
            acb->req.nb_sectors, acb->req.qiov, 0);
    }

    acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
    qemu_bh_schedule(acb->bh);
}

static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
                                               int64_t sector_num,
                                               QEMUIOVector *qiov,
                                               int nb_sectors,
                                               BlockDriverCompletionFunc *cb,
                                               void *opaque,
                                               bool is_write)
{
    Coroutine *co;
    BlockDriverAIOCBCoroutine *acb;

    acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
    acb->req.sector = sector_num;
    acb->req.nb_sectors = nb_sectors;
    acb->req.qiov = qiov;
    acb->is_write = is_write;
    acb->done = NULL;

    co = qemu_coroutine_create(bdrv_co_do_rw);
    qemu_coroutine_enter(co, acb);

    return &acb->common;
}

static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
{
    BlockDriverAIOCBCoroutine *acb = opaque;
    BlockDriverState *bs = acb->common.bs;

    acb->req.error = bdrv_co_flush(bs);
    acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
    qemu_bh_schedule(acb->bh);
}

BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
        BlockDriverCompletionFunc *cb, void *opaque)
{
    trace_bdrv_aio_flush(bs, opaque);

    Coroutine *co;
    BlockDriverAIOCBCoroutine *acb;

    acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
    acb->done = NULL;

    co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
    qemu_coroutine_enter(co, acb);

    return &acb->common;
}

static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
{
    BlockDriverAIOCBCoroutine *acb = opaque;
    BlockDriverState *bs = acb->common.bs;

    acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
    acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
    qemu_bh_schedule(acb->bh);
}

BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
        int64_t sector_num, int nb_sectors,
        BlockDriverCompletionFunc *cb, void *opaque)
{
    Coroutine *co;
    BlockDriverAIOCBCoroutine *acb;

    trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);

    acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
    acb->req.sector = sector_num;
    acb->req.nb_sectors = nb_sectors;
    acb->done = NULL;
    co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
    qemu_coroutine_enter(co, acb);

    return &acb->common;
}

void bdrv_init(void)
{
    module_call_init(MODULE_INIT_BLOCK);
}

void bdrv_init_with_whitelist(void)
{
    use_bdrv_whitelist = 1;
    bdrv_init();
}

void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
                   BlockDriverCompletionFunc *cb, void *opaque)
{
    BlockDriverAIOCB *acb;

    acb = g_slice_alloc(aiocb_info->aiocb_size);
    acb->aiocb_info = aiocb_info;
    acb->bs = bs;
    acb->cb = cb;
    acb->opaque = opaque;
    return acb;
}

void qemu_aio_release(void *p)
{
    BlockDriverAIOCB *acb = p;
    g_slice_free1(acb->aiocb_info->aiocb_size, acb);
}

/**************************************************************/
/* Coroutine block device emulation */

typedef struct CoroutineIOCompletion {
    Coroutine *coroutine;
    int ret;
} CoroutineIOCompletion;

static void bdrv_co_io_em_complete(void *opaque, int ret)
{
    CoroutineIOCompletion *co = opaque;

    co->ret = ret;
    qemu_coroutine_enter(co->coroutine, NULL);
}

static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
                                      int nb_sectors, QEMUIOVector *iov,
                                      bool is_write)
{
    CoroutineIOCompletion co = {
        .coroutine = qemu_coroutine_self(),
    };
    BlockDriverAIOCB *acb;

    if (is_write) {
        acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
                                       bdrv_co_io_em_complete, &co);
    } else {
        acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
                                      bdrv_co_io_em_complete, &co);
    }

    trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
    if (!acb) {
        return -EIO;
    }
    qemu_coroutine_yield();

    return co.ret;
}

static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
                                         int64_t sector_num, int nb_sectors,
                                         QEMUIOVector *iov)
{
    return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
}

static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
                                         int64_t sector_num, int nb_sectors,
                                         QEMUIOVector *iov)
{
    return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
}

static void coroutine_fn bdrv_flush_co_entry(void *opaque)
{
    RwCo *rwco = opaque;

    rwco->ret = bdrv_co_flush(rwco->bs);
}

int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
{
    int ret;

    if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
        return 0;
    }

    /* Write back cached data to the OS even with cache=unsafe */
    BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
    if (bs->drv->bdrv_co_flush_to_os) {
        ret = bs->drv->bdrv_co_flush_to_os(bs);
        if (ret < 0) {
            return ret;
        }
    }

    /* But don't actually force it to the disk with cache=unsafe */
    if (bs->open_flags & BDRV_O_NO_FLUSH) {
        goto flush_parent;
    }

    BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
    if (bs->drv->bdrv_co_flush_to_disk) {
        ret = bs->drv->bdrv_co_flush_to_disk(bs);
    } else if (bs->drv->bdrv_aio_flush) {
        BlockDriverAIOCB *acb;
        CoroutineIOCompletion co = {
            .coroutine = qemu_coroutine_self(),
        };

        acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
        if (acb == NULL) {
            ret = -EIO;
        } else {
            qemu_coroutine_yield();
            ret = co.ret;
        }
    } else {
        /*
         * Some block drivers always operate in either writethrough or unsafe
         * mode and don't support bdrv_flush therefore. Usually qemu doesn't
         * know how the server works (because the behaviour is hardcoded or
         * depends on server-side configuration), so we can't ensure that
         * everything is safe on disk. Returning an error doesn't work because
         * that would break guests even if the server operates in writethrough
         * mode.
         *
         * Let's hope the user knows what he's doing.
         */
        ret = 0;
    }
    if (ret < 0) {
        return ret;
    }

    /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
     * in the case of cache=unsafe, so there are no useless flushes.
     */
flush_parent:
    return bdrv_co_flush(bs->file);
}

void bdrv_invalidate_cache(BlockDriverState *bs)
{
    if (bs->drv && bs->drv->bdrv_invalidate_cache) {
        bs->drv->bdrv_invalidate_cache(bs);
    }
}

void bdrv_invalidate_cache_all(void)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        bdrv_invalidate_cache(bs);
    }
}

void bdrv_clear_incoming_migration_all(void)
{
    BlockDriverState *bs;

    QTAILQ_FOREACH(bs, &bdrv_states, list) {
        bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
    }
}

int bdrv_flush(BlockDriverState *bs)
{
    Coroutine *co;
    RwCo rwco = {
        .bs = bs,
        .ret = NOT_DONE,
    };

    if (qemu_in_coroutine()) {
        /* Fast-path if already in coroutine context */
        bdrv_flush_co_entry(&rwco);
    } else {
        co = qemu_coroutine_create(bdrv_flush_co_entry);
        qemu_coroutine_enter(co, &rwco);
        while (rwco.ret == NOT_DONE) {
            qemu_aio_wait();
        }
    }

    return rwco.ret;
}

static void coroutine_fn bdrv_discard_co_entry(void *opaque)
{
    RwCo *rwco = opaque;

    rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
}

int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
                                 int nb_sectors)
{
    if (!bs->drv) {
        return -ENOMEDIUM;
    } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
        return -EIO;
    } else if (bs->read_only) {
        return -EROFS;
    }

    if (bs->dirty_bitmap) {
        bdrv_reset_dirty(bs, sector_num, nb_sectors);
    }

    /* Do nothing if disabled.  */
    if (!(bs->open_flags & BDRV_O_UNMAP)) {
        return 0;
    }

    if (bs->drv->bdrv_co_discard) {
        return bs->drv->bdrv_co_discard(bs, sector_num, nb_sectors);
    } else if (bs->drv->bdrv_aio_discard) {
        BlockDriverAIOCB *acb;
        CoroutineIOCompletion co = {
            .coroutine = qemu_coroutine_self(),
        };

        acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
                                        bdrv_co_io_em_complete, &co);
        if (acb == NULL) {
            return -EIO;
        } else {
            qemu_coroutine_yield();
            return co.ret;
        }
    } else {
        return 0;
    }
}

int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
{
    Coroutine *co;
    RwCo rwco = {
        .bs = bs,
        .sector_num = sector_num,
        .nb_sectors = nb_sectors,
        .ret = NOT_DONE,
    };

    if (qemu_in_coroutine()) {
        /* Fast-path if already in coroutine context */
        bdrv_discard_co_entry(&rwco);
    } else {
        co = qemu_coroutine_create(bdrv_discard_co_entry);
        qemu_coroutine_enter(co, &rwco);
        while (rwco.ret == NOT_DONE) {
            qemu_aio_wait();
        }
    }

    return rwco.ret;
}

/**************************************************************/
/* removable device support */

/**
 * Return TRUE if the media is present
 */
int bdrv_is_inserted(BlockDriverState *bs)
{
    BlockDriver *drv = bs->drv;

    if (!drv)
        return 0;
    if (!drv->bdrv_is_inserted)
        return 1;
    return drv->bdrv_is_inserted(bs);
}

/**
 * Return whether the media changed since the last call to this
 * function, or -ENOTSUP if we don't know.  Most drivers don't know.
 */
int bdrv_media_changed(BlockDriverState *bs)
{
    BlockDriver *drv = bs->drv;

    if (drv && drv->bdrv_media_changed) {
        return drv->bdrv_media_changed(bs);
    }
    return -ENOTSUP;
}

/**
 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
 */
void bdrv_eject(BlockDriverState *bs, bool eject_flag)
{
    BlockDriver *drv = bs->drv;

    if (drv && drv->bdrv_eject) {
        drv->bdrv_eject(bs, eject_flag);
    }

    if (bs->device_name[0] != '\0') {
        bdrv_emit_qmp_eject_event(bs, eject_flag);
    }
}

/**
 * Lock or unlock the media (if it is locked, the user won't be able
 * to eject it manually).
 */
void bdrv_lock_medium(BlockDriverState *bs, bool locked)
{
    BlockDriver *drv = bs->drv;

    trace_bdrv_lock_medium(bs, locked);

    if (drv && drv->bdrv_lock_medium) {
        drv->bdrv_lock_medium(bs, locked);
    }
}

/* needed for generic scsi interface */

int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
{
    BlockDriver *drv = bs->drv;

    if (drv && drv->bdrv_ioctl)
        return drv->bdrv_ioctl(bs, req, buf);
    return -ENOTSUP;
}

BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
        unsigned long int req, void *buf,
        BlockDriverCompletionFunc *cb, void *opaque)
{
    BlockDriver *drv = bs->drv;

    if (drv && drv->bdrv_aio_ioctl)
        return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
    return NULL;
}

void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
{
    bs->buffer_alignment = align;
}

void *qemu_blockalign(BlockDriverState *bs, size_t size)
{
    return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
}

/*
 * Check if all memory in this vector is sector aligned.
 */
bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
{
    int i;

    for (i = 0; i < qiov->niov; i++) {
        if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
            return false;
        }
    }

    return true;
}

void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
{
    int64_t bitmap_size;

    assert((granularity & (granularity - 1)) == 0);

    if (granularity) {
        granularity >>= BDRV_SECTOR_BITS;
        assert(!bs->dirty_bitmap);
        bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
        bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
    } else {
        if (bs->dirty_bitmap) {
            hbitmap_free(bs->dirty_bitmap);
            bs->dirty_bitmap = NULL;
        }
    }
}

int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
{
    if (bs->dirty_bitmap) {
        return hbitmap_get(bs->dirty_bitmap, sector);
    } else {
        return 0;
    }
}

void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
{
    hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
}

void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
                    int nr_sectors)
{
    hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
}

void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
                      int nr_sectors)
{
    hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
}

int64_t bdrv_get_dirty_count(BlockDriverState *bs)
{
    if (bs->dirty_bitmap) {
        return hbitmap_count(bs->dirty_bitmap);
    } else {
        return 0;
    }
}

void bdrv_set_in_use(BlockDriverState *bs, int in_use)
{
    assert(bs->in_use != in_use);
    bs->in_use = in_use;
}

int bdrv_in_use(BlockDriverState *bs)
{
    return bs->in_use;
}

void bdrv_iostatus_enable(BlockDriverState *bs)
{
    bs->iostatus_enabled = true;
    bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
}

/* The I/O status is only enabled if the drive explicitly
 * enables it _and_ the VM is configured to stop on errors */
bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
{
    return (bs->iostatus_enabled &&
           (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
            bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
            bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
}

void bdrv_iostatus_disable(BlockDriverState *bs)
{
    bs->iostatus_enabled = false;
}

void bdrv_iostatus_reset(BlockDriverState *bs)
{
    if (bdrv_iostatus_is_enabled(bs)) {
        bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
        if (bs->job) {
            block_job_iostatus_reset(bs->job);
        }
    }
}

void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
{
    assert(bdrv_iostatus_is_enabled(bs));
    if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
        bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
                                         BLOCK_DEVICE_IO_STATUS_FAILED;
    }
}

void
bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
        enum BlockAcctType type)
{
    assert(type < BDRV_MAX_IOTYPE);

    cookie->bytes = bytes;
    cookie->start_time_ns = get_clock();
    cookie->type = type;
}

void
bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
{
    assert(cookie->type < BDRV_MAX_IOTYPE);

    bs->nr_bytes[cookie->type] += cookie->bytes;
    bs->nr_ops[cookie->type]++;
    bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
}

void bdrv_img_create(const char *filename, const char *fmt,
                     const char *base_filename, const char *base_fmt,
                     char *options, uint64_t img_size, int flags,
                     Error **errp, bool quiet)
{
    QEMUOptionParameter *param = NULL, *create_options = NULL;
    QEMUOptionParameter *backing_fmt, *backing_file, *size;
    BlockDriverState *bs = NULL;
    BlockDriver *drv, *proto_drv;
    BlockDriver *backing_drv = NULL;
    int ret = 0;

    /* Find driver and parse its options */
    drv = bdrv_find_format(fmt);
    if (!drv) {
        error_setg(errp, "Unknown file format '%s'", fmt);
        return;
    }

    proto_drv = bdrv_find_protocol(filename, true);
    if (!proto_drv) {
        error_setg(errp, "Unknown protocol '%s'", filename);
        return;
    }

    create_options = append_option_parameters(create_options,
                                              drv->create_options);
    create_options = append_option_parameters(create_options,
                                              proto_drv->create_options);

    /* Create parameter list with default values */
    param = parse_option_parameters("", create_options, param);

    set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);

    /* Parse -o options */
    if (options) {
        param = parse_option_parameters(options, create_options, param);
        if (param == NULL) {
            error_setg(errp, "Invalid options for file format '%s'.", fmt);
            goto out;
        }
    }

    if (base_filename) {
        if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
                                 base_filename)) {
            error_setg(errp, "Backing file not supported for file format '%s'",
                       fmt);
            goto out;
        }
    }

    if (base_fmt) {
        if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
            error_setg(errp, "Backing file format not supported for file "
                             "format '%s'", fmt);
            goto out;
        }
    }

    backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
    if (backing_file && backing_file->value.s) {
        if (!strcmp(filename, backing_file->value.s)) {
            error_setg(errp, "Error: Trying to create an image with the "
                             "same filename as the backing file");
            goto out;
        }
    }

    backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
    if (backing_fmt && backing_fmt->value.s) {
        backing_drv = bdrv_find_format(backing_fmt->value.s);
        if (!backing_drv) {
            error_setg(errp, "Unknown backing file format '%s'",
                       backing_fmt->value.s);
            goto out;
        }
    }

    // The size for the image must always be specified, with one exception:
    // If we are using a backing file, we can obtain the size from there
    size = get_option_parameter(param, BLOCK_OPT_SIZE);
    if (size && size->value.n == -1) {
        if (backing_file && backing_file->value.s) {
            uint64_t size;
            char buf[32];
            int back_flags;

            /* backing files always opened read-only */
            back_flags =
                flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);

            bs = bdrv_new("");

            ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
                            backing_drv);
            if (ret < 0) {
                error_setg_errno(errp, -ret, "Could not open '%s'",
                                 backing_file->value.s);
                goto out;
            }
            bdrv_get_geometry(bs, &size);
            size *= 512;

            snprintf(buf, sizeof(buf), "%" PRId64, size);
            set_option_parameter(param, BLOCK_OPT_SIZE, buf);
        } else {
            error_setg(errp, "Image creation needs a size parameter");
            goto out;
        }
    }

    if (!quiet) {
        printf("Formatting '%s', fmt=%s ", filename, fmt);
        print_option_parameters(param);
        puts("");
    }
    ret = bdrv_create(drv, filename, param);
    if (ret < 0) {
        if (ret == -ENOTSUP) {
            error_setg(errp,"Formatting or formatting option not supported for "
                            "file format '%s'", fmt);
        } else if (ret == -EFBIG) {
            const char *cluster_size_hint = "";
            if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
                cluster_size_hint = " (try using a larger cluster size)";
            }
            error_setg(errp, "The image size is too large for file format '%s'%s",
                       fmt, cluster_size_hint);
        } else {
            error_setg(errp, "%s: error while creating %s: %s", filename, fmt,
                       strerror(-ret));
        }
    }

out:
    free_option_parameters(create_options);
    free_option_parameters(param);

    if (bs) {
        bdrv_delete(bs);
    }
}

AioContext *bdrv_get_aio_context(BlockDriverState *bs)
{
    /* Currently BlockDriverState always uses the main loop AioContext */
    return qemu_get_aio_context();
}

void bdrv_add_before_write_notifier(BlockDriverState *bs,
                                    NotifierWithReturn *notifier)
{
    notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
}