1 /* 2 * QEMU System Emulator block driver 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "config-host.h" 25 #include "qemu-common.h" 26 #include "trace.h" 27 #include "block/block_int.h" 28 #include "block/blockjob.h" 29 #include "qemu/module.h" 30 #include "qapi/qmp/qjson.h" 31 #include "sysemu/sysemu.h" 32 #include "qemu/notify.h" 33 #include "block/coroutine.h" 34 #include "block/qapi.h" 35 #include "qmp-commands.h" 36 #include "qemu/timer.h" 37 #include "qapi-event.h" 38 39 #ifdef CONFIG_BSD 40 #include <sys/types.h> 41 #include <sys/stat.h> 42 #include <sys/ioctl.h> 43 #include <sys/queue.h> 44 #ifndef __DragonFly__ 45 #include <sys/disk.h> 46 #endif 47 #endif 48 49 #ifdef _WIN32 50 #include <windows.h> 51 #endif 52 53 struct BdrvDirtyBitmap { 54 HBitmap *bitmap; 55 QLIST_ENTRY(BdrvDirtyBitmap) list; 56 }; 57 58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */ 59 60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load); 61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, 62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 63 BlockDriverCompletionFunc *cb, void *opaque); 64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, 65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 66 BlockDriverCompletionFunc *cb, void *opaque); 67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, 68 int64_t sector_num, int nb_sectors, 69 QEMUIOVector *iov); 70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, 71 int64_t sector_num, int nb_sectors, 72 QEMUIOVector *iov); 73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, 74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 75 BdrvRequestFlags flags); 76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, 77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 78 BdrvRequestFlags flags); 79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, 80 int64_t sector_num, 81 QEMUIOVector *qiov, 82 int nb_sectors, 83 BdrvRequestFlags flags, 84 BlockDriverCompletionFunc *cb, 85 void *opaque, 86 bool is_write); 87 static void coroutine_fn bdrv_co_do_rw(void *opaque); 88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, 89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags); 90 91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states = 92 QTAILQ_HEAD_INITIALIZER(bdrv_states); 93 94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states = 95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states); 96 97 static QLIST_HEAD(, BlockDriver) bdrv_drivers = 98 QLIST_HEAD_INITIALIZER(bdrv_drivers); 99 100 /* If non-zero, use only whitelisted block drivers */ 101 static int use_bdrv_whitelist; 102 103 #ifdef _WIN32 104 static int is_windows_drive_prefix(const char *filename) 105 { 106 return (((filename[0] >= 'a' && filename[0] <= 'z') || 107 (filename[0] >= 'A' && filename[0] <= 'Z')) && 108 filename[1] == ':'); 109 } 110 111 int is_windows_drive(const char *filename) 112 { 113 if (is_windows_drive_prefix(filename) && 114 filename[2] == '\0') 115 return 1; 116 if (strstart(filename, "\\\\.\\", NULL) || 117 strstart(filename, "//./", NULL)) 118 return 1; 119 return 0; 120 } 121 #endif 122 123 /* throttling disk I/O limits */ 124 void bdrv_set_io_limits(BlockDriverState *bs, 125 ThrottleConfig *cfg) 126 { 127 int i; 128 129 throttle_config(&bs->throttle_state, cfg); 130 131 for (i = 0; i < 2; i++) { 132 qemu_co_enter_next(&bs->throttled_reqs[i]); 133 } 134 } 135 136 /* this function drain all the throttled IOs */ 137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs) 138 { 139 bool drained = false; 140 bool enabled = bs->io_limits_enabled; 141 int i; 142 143 bs->io_limits_enabled = false; 144 145 for (i = 0; i < 2; i++) { 146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) { 147 drained = true; 148 } 149 } 150 151 bs->io_limits_enabled = enabled; 152 153 return drained; 154 } 155 156 void bdrv_io_limits_disable(BlockDriverState *bs) 157 { 158 bs->io_limits_enabled = false; 159 160 bdrv_start_throttled_reqs(bs); 161 162 throttle_destroy(&bs->throttle_state); 163 } 164 165 static void bdrv_throttle_read_timer_cb(void *opaque) 166 { 167 BlockDriverState *bs = opaque; 168 qemu_co_enter_next(&bs->throttled_reqs[0]); 169 } 170 171 static void bdrv_throttle_write_timer_cb(void *opaque) 172 { 173 BlockDriverState *bs = opaque; 174 qemu_co_enter_next(&bs->throttled_reqs[1]); 175 } 176 177 /* should be called before bdrv_set_io_limits if a limit is set */ 178 void bdrv_io_limits_enable(BlockDriverState *bs) 179 { 180 assert(!bs->io_limits_enabled); 181 throttle_init(&bs->throttle_state, 182 bdrv_get_aio_context(bs), 183 QEMU_CLOCK_VIRTUAL, 184 bdrv_throttle_read_timer_cb, 185 bdrv_throttle_write_timer_cb, 186 bs); 187 bs->io_limits_enabled = true; 188 } 189 190 /* This function makes an IO wait if needed 191 * 192 * @nb_sectors: the number of sectors of the IO 193 * @is_write: is the IO a write 194 */ 195 static void bdrv_io_limits_intercept(BlockDriverState *bs, 196 unsigned int bytes, 197 bool is_write) 198 { 199 /* does this io must wait */ 200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write); 201 202 /* if must wait or any request of this type throttled queue the IO */ 203 if (must_wait || 204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) { 205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]); 206 } 207 208 /* the IO will be executed, do the accounting */ 209 throttle_account(&bs->throttle_state, is_write, bytes); 210 211 212 /* if the next request must wait -> do nothing */ 213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) { 214 return; 215 } 216 217 /* else queue next request for execution */ 218 qemu_co_queue_next(&bs->throttled_reqs[is_write]); 219 } 220 221 size_t bdrv_opt_mem_align(BlockDriverState *bs) 222 { 223 if (!bs || !bs->drv) { 224 /* 4k should be on the safe side */ 225 return 4096; 226 } 227 228 return bs->bl.opt_mem_alignment; 229 } 230 231 /* check if the path starts with "<protocol>:" */ 232 static int path_has_protocol(const char *path) 233 { 234 const char *p; 235 236 #ifdef _WIN32 237 if (is_windows_drive(path) || 238 is_windows_drive_prefix(path)) { 239 return 0; 240 } 241 p = path + strcspn(path, ":/\\"); 242 #else 243 p = path + strcspn(path, ":/"); 244 #endif 245 246 return *p == ':'; 247 } 248 249 int path_is_absolute(const char *path) 250 { 251 #ifdef _WIN32 252 /* specific case for names like: "\\.\d:" */ 253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) { 254 return 1; 255 } 256 return (*path == '/' || *path == '\\'); 257 #else 258 return (*path == '/'); 259 #endif 260 } 261 262 /* if filename is absolute, just copy it to dest. Otherwise, build a 263 path to it by considering it is relative to base_path. URL are 264 supported. */ 265 void path_combine(char *dest, int dest_size, 266 const char *base_path, 267 const char *filename) 268 { 269 const char *p, *p1; 270 int len; 271 272 if (dest_size <= 0) 273 return; 274 if (path_is_absolute(filename)) { 275 pstrcpy(dest, dest_size, filename); 276 } else { 277 p = strchr(base_path, ':'); 278 if (p) 279 p++; 280 else 281 p = base_path; 282 p1 = strrchr(base_path, '/'); 283 #ifdef _WIN32 284 { 285 const char *p2; 286 p2 = strrchr(base_path, '\\'); 287 if (!p1 || p2 > p1) 288 p1 = p2; 289 } 290 #endif 291 if (p1) 292 p1++; 293 else 294 p1 = base_path; 295 if (p1 > p) 296 p = p1; 297 len = p - base_path; 298 if (len > dest_size - 1) 299 len = dest_size - 1; 300 memcpy(dest, base_path, len); 301 dest[len] = '\0'; 302 pstrcat(dest, dest_size, filename); 303 } 304 } 305 306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz) 307 { 308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) { 309 pstrcpy(dest, sz, bs->backing_file); 310 } else { 311 path_combine(dest, sz, bs->filename, bs->backing_file); 312 } 313 } 314 315 void bdrv_register(BlockDriver *bdrv) 316 { 317 /* Block drivers without coroutine functions need emulation */ 318 if (!bdrv->bdrv_co_readv) { 319 bdrv->bdrv_co_readv = bdrv_co_readv_em; 320 bdrv->bdrv_co_writev = bdrv_co_writev_em; 321 322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if 323 * the block driver lacks aio we need to emulate that too. 324 */ 325 if (!bdrv->bdrv_aio_readv) { 326 /* add AIO emulation layer */ 327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em; 328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em; 329 } 330 } 331 332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list); 333 } 334 335 /* create a new block device (by default it is empty) */ 336 BlockDriverState *bdrv_new(const char *device_name, Error **errp) 337 { 338 BlockDriverState *bs; 339 int i; 340 341 if (bdrv_find(device_name)) { 342 error_setg(errp, "Device with id '%s' already exists", 343 device_name); 344 return NULL; 345 } 346 if (bdrv_find_node(device_name)) { 347 error_setg(errp, "Device with node-name '%s' already exists", 348 device_name); 349 return NULL; 350 } 351 352 bs = g_malloc0(sizeof(BlockDriverState)); 353 QLIST_INIT(&bs->dirty_bitmaps); 354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name); 355 if (device_name[0] != '\0') { 356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list); 357 } 358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) { 359 QLIST_INIT(&bs->op_blockers[i]); 360 } 361 bdrv_iostatus_disable(bs); 362 notifier_list_init(&bs->close_notifiers); 363 notifier_with_return_list_init(&bs->before_write_notifiers); 364 qemu_co_queue_init(&bs->throttled_reqs[0]); 365 qemu_co_queue_init(&bs->throttled_reqs[1]); 366 bs->refcnt = 1; 367 bs->aio_context = qemu_get_aio_context(); 368 369 return bs; 370 } 371 372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify) 373 { 374 notifier_list_add(&bs->close_notifiers, notify); 375 } 376 377 BlockDriver *bdrv_find_format(const char *format_name) 378 { 379 BlockDriver *drv1; 380 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 381 if (!strcmp(drv1->format_name, format_name)) { 382 return drv1; 383 } 384 } 385 return NULL; 386 } 387 388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only) 389 { 390 static const char *whitelist_rw[] = { 391 CONFIG_BDRV_RW_WHITELIST 392 }; 393 static const char *whitelist_ro[] = { 394 CONFIG_BDRV_RO_WHITELIST 395 }; 396 const char **p; 397 398 if (!whitelist_rw[0] && !whitelist_ro[0]) { 399 return 1; /* no whitelist, anything goes */ 400 } 401 402 for (p = whitelist_rw; *p; p++) { 403 if (!strcmp(drv->format_name, *p)) { 404 return 1; 405 } 406 } 407 if (read_only) { 408 for (p = whitelist_ro; *p; p++) { 409 if (!strcmp(drv->format_name, *p)) { 410 return 1; 411 } 412 } 413 } 414 return 0; 415 } 416 417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name, 418 bool read_only) 419 { 420 BlockDriver *drv = bdrv_find_format(format_name); 421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL; 422 } 423 424 typedef struct CreateCo { 425 BlockDriver *drv; 426 char *filename; 427 QemuOpts *opts; 428 int ret; 429 Error *err; 430 } CreateCo; 431 432 static void coroutine_fn bdrv_create_co_entry(void *opaque) 433 { 434 Error *local_err = NULL; 435 int ret; 436 437 CreateCo *cco = opaque; 438 assert(cco->drv); 439 440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err); 441 if (local_err) { 442 error_propagate(&cco->err, local_err); 443 } 444 cco->ret = ret; 445 } 446 447 int bdrv_create(BlockDriver *drv, const char* filename, 448 QemuOpts *opts, Error **errp) 449 { 450 int ret; 451 452 Coroutine *co; 453 CreateCo cco = { 454 .drv = drv, 455 .filename = g_strdup(filename), 456 .opts = opts, 457 .ret = NOT_DONE, 458 .err = NULL, 459 }; 460 461 if (!drv->bdrv_create) { 462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name); 463 ret = -ENOTSUP; 464 goto out; 465 } 466 467 if (qemu_in_coroutine()) { 468 /* Fast-path if already in coroutine context */ 469 bdrv_create_co_entry(&cco); 470 } else { 471 co = qemu_coroutine_create(bdrv_create_co_entry); 472 qemu_coroutine_enter(co, &cco); 473 while (cco.ret == NOT_DONE) { 474 aio_poll(qemu_get_aio_context(), true); 475 } 476 } 477 478 ret = cco.ret; 479 if (ret < 0) { 480 if (cco.err) { 481 error_propagate(errp, cco.err); 482 } else { 483 error_setg_errno(errp, -ret, "Could not create image"); 484 } 485 } 486 487 out: 488 g_free(cco.filename); 489 return ret; 490 } 491 492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp) 493 { 494 BlockDriver *drv; 495 Error *local_err = NULL; 496 int ret; 497 498 drv = bdrv_find_protocol(filename, true); 499 if (drv == NULL) { 500 error_setg(errp, "Could not find protocol for file '%s'", filename); 501 return -ENOENT; 502 } 503 504 ret = bdrv_create(drv, filename, opts, &local_err); 505 if (local_err) { 506 error_propagate(errp, local_err); 507 } 508 return ret; 509 } 510 511 int bdrv_refresh_limits(BlockDriverState *bs) 512 { 513 BlockDriver *drv = bs->drv; 514 515 memset(&bs->bl, 0, sizeof(bs->bl)); 516 517 if (!drv) { 518 return 0; 519 } 520 521 /* Take some limits from the children as a default */ 522 if (bs->file) { 523 bdrv_refresh_limits(bs->file); 524 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length; 525 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment; 526 } else { 527 bs->bl.opt_mem_alignment = 512; 528 } 529 530 if (bs->backing_hd) { 531 bdrv_refresh_limits(bs->backing_hd); 532 bs->bl.opt_transfer_length = 533 MAX(bs->bl.opt_transfer_length, 534 bs->backing_hd->bl.opt_transfer_length); 535 bs->bl.opt_mem_alignment = 536 MAX(bs->bl.opt_mem_alignment, 537 bs->backing_hd->bl.opt_mem_alignment); 538 } 539 540 /* Then let the driver override it */ 541 if (drv->bdrv_refresh_limits) { 542 return drv->bdrv_refresh_limits(bs); 543 } 544 545 return 0; 546 } 547 548 /* 549 * Create a uniquely-named empty temporary file. 550 * Return 0 upon success, otherwise a negative errno value. 551 */ 552 int get_tmp_filename(char *filename, int size) 553 { 554 #ifdef _WIN32 555 char temp_dir[MAX_PATH]; 556 /* GetTempFileName requires that its output buffer (4th param) 557 have length MAX_PATH or greater. */ 558 assert(size >= MAX_PATH); 559 return (GetTempPath(MAX_PATH, temp_dir) 560 && GetTempFileName(temp_dir, "qem", 0, filename) 561 ? 0 : -GetLastError()); 562 #else 563 int fd; 564 const char *tmpdir; 565 tmpdir = getenv("TMPDIR"); 566 if (!tmpdir) { 567 tmpdir = "/var/tmp"; 568 } 569 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) { 570 return -EOVERFLOW; 571 } 572 fd = mkstemp(filename); 573 if (fd < 0) { 574 return -errno; 575 } 576 if (close(fd) != 0) { 577 unlink(filename); 578 return -errno; 579 } 580 return 0; 581 #endif 582 } 583 584 /* 585 * Detect host devices. By convention, /dev/cdrom[N] is always 586 * recognized as a host CDROM. 587 */ 588 static BlockDriver *find_hdev_driver(const char *filename) 589 { 590 int score_max = 0, score; 591 BlockDriver *drv = NULL, *d; 592 593 QLIST_FOREACH(d, &bdrv_drivers, list) { 594 if (d->bdrv_probe_device) { 595 score = d->bdrv_probe_device(filename); 596 if (score > score_max) { 597 score_max = score; 598 drv = d; 599 } 600 } 601 } 602 603 return drv; 604 } 605 606 BlockDriver *bdrv_find_protocol(const char *filename, 607 bool allow_protocol_prefix) 608 { 609 BlockDriver *drv1; 610 char protocol[128]; 611 int len; 612 const char *p; 613 614 /* TODO Drivers without bdrv_file_open must be specified explicitly */ 615 616 /* 617 * XXX(hch): we really should not let host device detection 618 * override an explicit protocol specification, but moving this 619 * later breaks access to device names with colons in them. 620 * Thanks to the brain-dead persistent naming schemes on udev- 621 * based Linux systems those actually are quite common. 622 */ 623 drv1 = find_hdev_driver(filename); 624 if (drv1) { 625 return drv1; 626 } 627 628 if (!path_has_protocol(filename) || !allow_protocol_prefix) { 629 return bdrv_find_format("file"); 630 } 631 632 p = strchr(filename, ':'); 633 assert(p != NULL); 634 len = p - filename; 635 if (len > sizeof(protocol) - 1) 636 len = sizeof(protocol) - 1; 637 memcpy(protocol, filename, len); 638 protocol[len] = '\0'; 639 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 640 if (drv1->protocol_name && 641 !strcmp(drv1->protocol_name, protocol)) { 642 return drv1; 643 } 644 } 645 return NULL; 646 } 647 648 static int find_image_format(BlockDriverState *bs, const char *filename, 649 BlockDriver **pdrv, Error **errp) 650 { 651 int score, score_max; 652 BlockDriver *drv1, *drv; 653 uint8_t buf[2048]; 654 int ret = 0; 655 656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */ 657 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) { 658 drv = bdrv_find_format("raw"); 659 if (!drv) { 660 error_setg(errp, "Could not find raw image format"); 661 ret = -ENOENT; 662 } 663 *pdrv = drv; 664 return ret; 665 } 666 667 ret = bdrv_pread(bs, 0, buf, sizeof(buf)); 668 if (ret < 0) { 669 error_setg_errno(errp, -ret, "Could not read image for determining its " 670 "format"); 671 *pdrv = NULL; 672 return ret; 673 } 674 675 score_max = 0; 676 drv = NULL; 677 QLIST_FOREACH(drv1, &bdrv_drivers, list) { 678 if (drv1->bdrv_probe) { 679 score = drv1->bdrv_probe(buf, ret, filename); 680 if (score > score_max) { 681 score_max = score; 682 drv = drv1; 683 } 684 } 685 } 686 if (!drv) { 687 error_setg(errp, "Could not determine image format: No compatible " 688 "driver found"); 689 ret = -ENOENT; 690 } 691 *pdrv = drv; 692 return ret; 693 } 694 695 /** 696 * Set the current 'total_sectors' value 697 */ 698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint) 699 { 700 BlockDriver *drv = bs->drv; 701 702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */ 703 if (bs->sg) 704 return 0; 705 706 /* query actual device if possible, otherwise just trust the hint */ 707 if (drv->bdrv_getlength) { 708 int64_t length = drv->bdrv_getlength(bs); 709 if (length < 0) { 710 return length; 711 } 712 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE); 713 } 714 715 bs->total_sectors = hint; 716 return 0; 717 } 718 719 /** 720 * Set open flags for a given discard mode 721 * 722 * Return 0 on success, -1 if the discard mode was invalid. 723 */ 724 int bdrv_parse_discard_flags(const char *mode, int *flags) 725 { 726 *flags &= ~BDRV_O_UNMAP; 727 728 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) { 729 /* do nothing */ 730 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) { 731 *flags |= BDRV_O_UNMAP; 732 } else { 733 return -1; 734 } 735 736 return 0; 737 } 738 739 /** 740 * Set open flags for a given cache mode 741 * 742 * Return 0 on success, -1 if the cache mode was invalid. 743 */ 744 int bdrv_parse_cache_flags(const char *mode, int *flags) 745 { 746 *flags &= ~BDRV_O_CACHE_MASK; 747 748 if (!strcmp(mode, "off") || !strcmp(mode, "none")) { 749 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB; 750 } else if (!strcmp(mode, "directsync")) { 751 *flags |= BDRV_O_NOCACHE; 752 } else if (!strcmp(mode, "writeback")) { 753 *flags |= BDRV_O_CACHE_WB; 754 } else if (!strcmp(mode, "unsafe")) { 755 *flags |= BDRV_O_CACHE_WB; 756 *flags |= BDRV_O_NO_FLUSH; 757 } else if (!strcmp(mode, "writethrough")) { 758 /* this is the default */ 759 } else { 760 return -1; 761 } 762 763 return 0; 764 } 765 766 /** 767 * The copy-on-read flag is actually a reference count so multiple users may 768 * use the feature without worrying about clobbering its previous state. 769 * Copy-on-read stays enabled until all users have called to disable it. 770 */ 771 void bdrv_enable_copy_on_read(BlockDriverState *bs) 772 { 773 bs->copy_on_read++; 774 } 775 776 void bdrv_disable_copy_on_read(BlockDriverState *bs) 777 { 778 assert(bs->copy_on_read > 0); 779 bs->copy_on_read--; 780 } 781 782 /* 783 * Returns the flags that a temporary snapshot should get, based on the 784 * originally requested flags (the originally requested image will have flags 785 * like a backing file) 786 */ 787 static int bdrv_temp_snapshot_flags(int flags) 788 { 789 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY; 790 } 791 792 /* 793 * Returns the flags that bs->file should get, based on the given flags for 794 * the parent BDS 795 */ 796 static int bdrv_inherited_flags(int flags) 797 { 798 /* Enable protocol handling, disable format probing for bs->file */ 799 flags |= BDRV_O_PROTOCOL; 800 801 /* Our block drivers take care to send flushes and respect unmap policy, 802 * so we can enable both unconditionally on lower layers. */ 803 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP; 804 805 /* Clear flags that only apply to the top layer */ 806 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ); 807 808 return flags; 809 } 810 811 /* 812 * Returns the flags that bs->backing_hd should get, based on the given flags 813 * for the parent BDS 814 */ 815 static int bdrv_backing_flags(int flags) 816 { 817 /* backing files always opened read-only */ 818 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ); 819 820 /* snapshot=on is handled on the top layer */ 821 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY); 822 823 return flags; 824 } 825 826 static int bdrv_open_flags(BlockDriverState *bs, int flags) 827 { 828 int open_flags = flags | BDRV_O_CACHE_WB; 829 830 /* 831 * Clear flags that are internal to the block layer before opening the 832 * image. 833 */ 834 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL); 835 836 /* 837 * Snapshots should be writable. 838 */ 839 if (flags & BDRV_O_TEMPORARY) { 840 open_flags |= BDRV_O_RDWR; 841 } 842 843 return open_flags; 844 } 845 846 static void bdrv_assign_node_name(BlockDriverState *bs, 847 const char *node_name, 848 Error **errp) 849 { 850 if (!node_name) { 851 return; 852 } 853 854 /* empty string node name is invalid */ 855 if (node_name[0] == '\0') { 856 error_setg(errp, "Empty node name"); 857 return; 858 } 859 860 /* takes care of avoiding namespaces collisions */ 861 if (bdrv_find(node_name)) { 862 error_setg(errp, "node-name=%s is conflicting with a device id", 863 node_name); 864 return; 865 } 866 867 /* takes care of avoiding duplicates node names */ 868 if (bdrv_find_node(node_name)) { 869 error_setg(errp, "Duplicate node name"); 870 return; 871 } 872 873 /* copy node name into the bs and insert it into the graph list */ 874 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name); 875 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list); 876 } 877 878 /* 879 * Common part for opening disk images and files 880 * 881 * Removes all processed options from *options. 882 */ 883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file, 884 QDict *options, int flags, BlockDriver *drv, Error **errp) 885 { 886 int ret, open_flags; 887 const char *filename; 888 const char *node_name = NULL; 889 Error *local_err = NULL; 890 891 assert(drv != NULL); 892 assert(bs->file == NULL); 893 assert(options != NULL && bs->options != options); 894 895 if (file != NULL) { 896 filename = file->filename; 897 } else { 898 filename = qdict_get_try_str(options, "filename"); 899 } 900 901 if (drv->bdrv_needs_filename && !filename) { 902 error_setg(errp, "The '%s' block driver requires a file name", 903 drv->format_name); 904 return -EINVAL; 905 } 906 907 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name); 908 909 node_name = qdict_get_try_str(options, "node-name"); 910 bdrv_assign_node_name(bs, node_name, &local_err); 911 if (local_err) { 912 error_propagate(errp, local_err); 913 return -EINVAL; 914 } 915 qdict_del(options, "node-name"); 916 917 /* bdrv_open() with directly using a protocol as drv. This layer is already 918 * opened, so assign it to bs (while file becomes a closed BlockDriverState) 919 * and return immediately. */ 920 if (file != NULL && drv->bdrv_file_open) { 921 bdrv_swap(file, bs); 922 return 0; 923 } 924 925 bs->open_flags = flags; 926 bs->guest_block_size = 512; 927 bs->request_alignment = 512; 928 bs->zero_beyond_eof = true; 929 open_flags = bdrv_open_flags(bs, flags); 930 bs->read_only = !(open_flags & BDRV_O_RDWR); 931 bs->growable = !!(flags & BDRV_O_PROTOCOL); 932 933 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) { 934 error_setg(errp, 935 !bs->read_only && bdrv_is_whitelisted(drv, true) 936 ? "Driver '%s' can only be used for read-only devices" 937 : "Driver '%s' is not whitelisted", 938 drv->format_name); 939 return -ENOTSUP; 940 } 941 942 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */ 943 if (flags & BDRV_O_COPY_ON_READ) { 944 if (!bs->read_only) { 945 bdrv_enable_copy_on_read(bs); 946 } else { 947 error_setg(errp, "Can't use copy-on-read on read-only device"); 948 return -EINVAL; 949 } 950 } 951 952 if (filename != NULL) { 953 pstrcpy(bs->filename, sizeof(bs->filename), filename); 954 } else { 955 bs->filename[0] = '\0'; 956 } 957 958 bs->drv = drv; 959 bs->opaque = g_malloc0(drv->instance_size); 960 961 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB); 962 963 /* Open the image, either directly or using a protocol */ 964 if (drv->bdrv_file_open) { 965 assert(file == NULL); 966 assert(!drv->bdrv_needs_filename || filename != NULL); 967 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err); 968 } else { 969 if (file == NULL) { 970 error_setg(errp, "Can't use '%s' as a block driver for the " 971 "protocol level", drv->format_name); 972 ret = -EINVAL; 973 goto free_and_fail; 974 } 975 bs->file = file; 976 ret = drv->bdrv_open(bs, options, open_flags, &local_err); 977 } 978 979 if (ret < 0) { 980 if (local_err) { 981 error_propagate(errp, local_err); 982 } else if (bs->filename[0]) { 983 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename); 984 } else { 985 error_setg_errno(errp, -ret, "Could not open image"); 986 } 987 goto free_and_fail; 988 } 989 990 ret = refresh_total_sectors(bs, bs->total_sectors); 991 if (ret < 0) { 992 error_setg_errno(errp, -ret, "Could not refresh total sector count"); 993 goto free_and_fail; 994 } 995 996 bdrv_refresh_limits(bs); 997 assert(bdrv_opt_mem_align(bs) != 0); 998 assert((bs->request_alignment != 0) || bs->sg); 999 return 0; 1000 1001 free_and_fail: 1002 bs->file = NULL; 1003 g_free(bs->opaque); 1004 bs->opaque = NULL; 1005 bs->drv = NULL; 1006 return ret; 1007 } 1008 1009 static QDict *parse_json_filename(const char *filename, Error **errp) 1010 { 1011 QObject *options_obj; 1012 QDict *options; 1013 int ret; 1014 1015 ret = strstart(filename, "json:", &filename); 1016 assert(ret); 1017 1018 options_obj = qobject_from_json(filename); 1019 if (!options_obj) { 1020 error_setg(errp, "Could not parse the JSON options"); 1021 return NULL; 1022 } 1023 1024 if (qobject_type(options_obj) != QTYPE_QDICT) { 1025 qobject_decref(options_obj); 1026 error_setg(errp, "Invalid JSON object given"); 1027 return NULL; 1028 } 1029 1030 options = qobject_to_qdict(options_obj); 1031 qdict_flatten(options); 1032 1033 return options; 1034 } 1035 1036 /* 1037 * Fills in default options for opening images and converts the legacy 1038 * filename/flags pair to option QDict entries. 1039 */ 1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags, 1041 BlockDriver *drv, Error **errp) 1042 { 1043 const char *filename = *pfilename; 1044 const char *drvname; 1045 bool protocol = flags & BDRV_O_PROTOCOL; 1046 bool parse_filename = false; 1047 Error *local_err = NULL; 1048 1049 /* Parse json: pseudo-protocol */ 1050 if (filename && g_str_has_prefix(filename, "json:")) { 1051 QDict *json_options = parse_json_filename(filename, &local_err); 1052 if (local_err) { 1053 error_propagate(errp, local_err); 1054 return -EINVAL; 1055 } 1056 1057 /* Options given in the filename have lower priority than options 1058 * specified directly */ 1059 qdict_join(*options, json_options, false); 1060 QDECREF(json_options); 1061 *pfilename = filename = NULL; 1062 } 1063 1064 /* Fetch the file name from the options QDict if necessary */ 1065 if (protocol && filename) { 1066 if (!qdict_haskey(*options, "filename")) { 1067 qdict_put(*options, "filename", qstring_from_str(filename)); 1068 parse_filename = true; 1069 } else { 1070 error_setg(errp, "Can't specify 'file' and 'filename' options at " 1071 "the same time"); 1072 return -EINVAL; 1073 } 1074 } 1075 1076 /* Find the right block driver */ 1077 filename = qdict_get_try_str(*options, "filename"); 1078 drvname = qdict_get_try_str(*options, "driver"); 1079 1080 if (drv) { 1081 if (drvname) { 1082 error_setg(errp, "Driver specified twice"); 1083 return -EINVAL; 1084 } 1085 drvname = drv->format_name; 1086 qdict_put(*options, "driver", qstring_from_str(drvname)); 1087 } else { 1088 if (!drvname && protocol) { 1089 if (filename) { 1090 drv = bdrv_find_protocol(filename, parse_filename); 1091 if (!drv) { 1092 error_setg(errp, "Unknown protocol"); 1093 return -EINVAL; 1094 } 1095 1096 drvname = drv->format_name; 1097 qdict_put(*options, "driver", qstring_from_str(drvname)); 1098 } else { 1099 error_setg(errp, "Must specify either driver or file"); 1100 return -EINVAL; 1101 } 1102 } else if (drvname) { 1103 drv = bdrv_find_format(drvname); 1104 if (!drv) { 1105 error_setg(errp, "Unknown driver '%s'", drvname); 1106 return -ENOENT; 1107 } 1108 } 1109 } 1110 1111 assert(drv || !protocol); 1112 1113 /* Driver-specific filename parsing */ 1114 if (drv && drv->bdrv_parse_filename && parse_filename) { 1115 drv->bdrv_parse_filename(filename, *options, &local_err); 1116 if (local_err) { 1117 error_propagate(errp, local_err); 1118 return -EINVAL; 1119 } 1120 1121 if (!drv->bdrv_needs_filename) { 1122 qdict_del(*options, "filename"); 1123 } 1124 } 1125 1126 return 0; 1127 } 1128 1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd) 1130 { 1131 1132 if (bs->backing_hd) { 1133 assert(bs->backing_blocker); 1134 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker); 1135 } else if (backing_hd) { 1136 error_setg(&bs->backing_blocker, 1137 "device is used as backing hd of '%s'", 1138 bs->device_name); 1139 } 1140 1141 bs->backing_hd = backing_hd; 1142 if (!backing_hd) { 1143 error_free(bs->backing_blocker); 1144 bs->backing_blocker = NULL; 1145 goto out; 1146 } 1147 bs->open_flags &= ~BDRV_O_NO_BACKING; 1148 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename); 1149 pstrcpy(bs->backing_format, sizeof(bs->backing_format), 1150 backing_hd->drv ? backing_hd->drv->format_name : ""); 1151 1152 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker); 1153 /* Otherwise we won't be able to commit due to check in bdrv_commit */ 1154 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, 1155 bs->backing_blocker); 1156 out: 1157 bdrv_refresh_limits(bs); 1158 } 1159 1160 /* 1161 * Opens the backing file for a BlockDriverState if not yet open 1162 * 1163 * options is a QDict of options to pass to the block drivers, or NULL for an 1164 * empty set of options. The reference to the QDict is transferred to this 1165 * function (even on failure), so if the caller intends to reuse the dictionary, 1166 * it needs to use QINCREF() before calling bdrv_file_open. 1167 */ 1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp) 1169 { 1170 char *backing_filename = g_malloc0(PATH_MAX); 1171 int ret = 0; 1172 BlockDriver *back_drv = NULL; 1173 BlockDriverState *backing_hd; 1174 Error *local_err = NULL; 1175 1176 if (bs->backing_hd != NULL) { 1177 QDECREF(options); 1178 goto free_exit; 1179 } 1180 1181 /* NULL means an empty set of options */ 1182 if (options == NULL) { 1183 options = qdict_new(); 1184 } 1185 1186 bs->open_flags &= ~BDRV_O_NO_BACKING; 1187 if (qdict_haskey(options, "file.filename")) { 1188 backing_filename[0] = '\0'; 1189 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) { 1190 QDECREF(options); 1191 goto free_exit; 1192 } else { 1193 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX); 1194 } 1195 1196 if (!bs->drv || !bs->drv->supports_backing) { 1197 ret = -EINVAL; 1198 error_setg(errp, "Driver doesn't support backing files"); 1199 QDECREF(options); 1200 goto free_exit; 1201 } 1202 1203 backing_hd = bdrv_new("", errp); 1204 1205 if (bs->backing_format[0] != '\0') { 1206 back_drv = bdrv_find_format(bs->backing_format); 1207 } 1208 1209 assert(bs->backing_hd == NULL); 1210 ret = bdrv_open(&backing_hd, 1211 *backing_filename ? backing_filename : NULL, NULL, options, 1212 bdrv_backing_flags(bs->open_flags), back_drv, &local_err); 1213 if (ret < 0) { 1214 bdrv_unref(backing_hd); 1215 backing_hd = NULL; 1216 bs->open_flags |= BDRV_O_NO_BACKING; 1217 error_setg(errp, "Could not open backing file: %s", 1218 error_get_pretty(local_err)); 1219 error_free(local_err); 1220 goto free_exit; 1221 } 1222 bdrv_set_backing_hd(bs, backing_hd); 1223 1224 free_exit: 1225 g_free(backing_filename); 1226 return ret; 1227 } 1228 1229 /* 1230 * Opens a disk image whose options are given as BlockdevRef in another block 1231 * device's options. 1232 * 1233 * If allow_none is true, no image will be opened if filename is false and no 1234 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned. 1235 * 1236 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict. 1237 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict 1238 * itself, all options starting with "${bdref_key}." are considered part of the 1239 * BlockdevRef. 1240 * 1241 * The BlockdevRef will be removed from the options QDict. 1242 * 1243 * To conform with the behavior of bdrv_open(), *pbs has to be NULL. 1244 */ 1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename, 1246 QDict *options, const char *bdref_key, int flags, 1247 bool allow_none, Error **errp) 1248 { 1249 QDict *image_options; 1250 int ret; 1251 char *bdref_key_dot; 1252 const char *reference; 1253 1254 assert(pbs); 1255 assert(*pbs == NULL); 1256 1257 bdref_key_dot = g_strdup_printf("%s.", bdref_key); 1258 qdict_extract_subqdict(options, &image_options, bdref_key_dot); 1259 g_free(bdref_key_dot); 1260 1261 reference = qdict_get_try_str(options, bdref_key); 1262 if (!filename && !reference && !qdict_size(image_options)) { 1263 if (allow_none) { 1264 ret = 0; 1265 } else { 1266 error_setg(errp, "A block device must be specified for \"%s\"", 1267 bdref_key); 1268 ret = -EINVAL; 1269 } 1270 QDECREF(image_options); 1271 goto done; 1272 } 1273 1274 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp); 1275 1276 done: 1277 qdict_del(options, bdref_key); 1278 return ret; 1279 } 1280 1281 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp) 1282 { 1283 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */ 1284 char *tmp_filename = g_malloc0(PATH_MAX + 1); 1285 int64_t total_size; 1286 BlockDriver *bdrv_qcow2; 1287 QemuOpts *opts = NULL; 1288 QDict *snapshot_options; 1289 BlockDriverState *bs_snapshot; 1290 Error *local_err; 1291 int ret; 1292 1293 /* if snapshot, we create a temporary backing file and open it 1294 instead of opening 'filename' directly */ 1295 1296 /* Get the required size from the image */ 1297 total_size = bdrv_getlength(bs); 1298 if (total_size < 0) { 1299 ret = total_size; 1300 error_setg_errno(errp, -total_size, "Could not get image size"); 1301 goto out; 1302 } 1303 total_size &= BDRV_SECTOR_MASK; 1304 1305 /* Create the temporary image */ 1306 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1); 1307 if (ret < 0) { 1308 error_setg_errno(errp, -ret, "Could not get temporary filename"); 1309 goto out; 1310 } 1311 1312 bdrv_qcow2 = bdrv_find_format("qcow2"); 1313 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0, 1314 &error_abort); 1315 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size); 1316 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err); 1317 qemu_opts_del(opts); 1318 if (ret < 0) { 1319 error_setg_errno(errp, -ret, "Could not create temporary overlay " 1320 "'%s': %s", tmp_filename, 1321 error_get_pretty(local_err)); 1322 error_free(local_err); 1323 goto out; 1324 } 1325 1326 /* Prepare a new options QDict for the temporary file */ 1327 snapshot_options = qdict_new(); 1328 qdict_put(snapshot_options, "file.driver", 1329 qstring_from_str("file")); 1330 qdict_put(snapshot_options, "file.filename", 1331 qstring_from_str(tmp_filename)); 1332 1333 bs_snapshot = bdrv_new("", &error_abort); 1334 1335 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options, 1336 flags, bdrv_qcow2, &local_err); 1337 if (ret < 0) { 1338 error_propagate(errp, local_err); 1339 goto out; 1340 } 1341 1342 bdrv_append(bs_snapshot, bs); 1343 1344 out: 1345 g_free(tmp_filename); 1346 return ret; 1347 } 1348 1349 /* 1350 * Opens a disk image (raw, qcow2, vmdk, ...) 1351 * 1352 * options is a QDict of options to pass to the block drivers, or NULL for an 1353 * empty set of options. The reference to the QDict belongs to the block layer 1354 * after the call (even on failure), so if the caller intends to reuse the 1355 * dictionary, it needs to use QINCREF() before calling bdrv_open. 1356 * 1357 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there. 1358 * If it is not NULL, the referenced BDS will be reused. 1359 * 1360 * The reference parameter may be used to specify an existing block device which 1361 * should be opened. If specified, neither options nor a filename may be given, 1362 * nor can an existing BDS be reused (that is, *pbs has to be NULL). 1363 */ 1364 int bdrv_open(BlockDriverState **pbs, const char *filename, 1365 const char *reference, QDict *options, int flags, 1366 BlockDriver *drv, Error **errp) 1367 { 1368 int ret; 1369 BlockDriverState *file = NULL, *bs; 1370 const char *drvname; 1371 Error *local_err = NULL; 1372 int snapshot_flags = 0; 1373 1374 assert(pbs); 1375 1376 if (reference) { 1377 bool options_non_empty = options ? qdict_size(options) : false; 1378 QDECREF(options); 1379 1380 if (*pbs) { 1381 error_setg(errp, "Cannot reuse an existing BDS when referencing " 1382 "another block device"); 1383 return -EINVAL; 1384 } 1385 1386 if (filename || options_non_empty) { 1387 error_setg(errp, "Cannot reference an existing block device with " 1388 "additional options or a new filename"); 1389 return -EINVAL; 1390 } 1391 1392 bs = bdrv_lookup_bs(reference, reference, errp); 1393 if (!bs) { 1394 return -ENODEV; 1395 } 1396 bdrv_ref(bs); 1397 *pbs = bs; 1398 return 0; 1399 } 1400 1401 if (*pbs) { 1402 bs = *pbs; 1403 } else { 1404 bs = bdrv_new("", &error_abort); 1405 } 1406 1407 /* NULL means an empty set of options */ 1408 if (options == NULL) { 1409 options = qdict_new(); 1410 } 1411 1412 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err); 1413 if (local_err) { 1414 goto fail; 1415 } 1416 1417 /* Find the right image format driver */ 1418 drv = NULL; 1419 drvname = qdict_get_try_str(options, "driver"); 1420 if (drvname) { 1421 drv = bdrv_find_format(drvname); 1422 qdict_del(options, "driver"); 1423 if (!drv) { 1424 error_setg(errp, "Unknown driver: '%s'", drvname); 1425 ret = -EINVAL; 1426 goto fail; 1427 } 1428 } 1429 1430 assert(drvname || !(flags & BDRV_O_PROTOCOL)); 1431 if (drv && !drv->bdrv_file_open) { 1432 /* If the user explicitly wants a format driver here, we'll need to add 1433 * another layer for the protocol in bs->file */ 1434 flags &= ~BDRV_O_PROTOCOL; 1435 } 1436 1437 bs->options = options; 1438 options = qdict_clone_shallow(options); 1439 1440 /* Open image file without format layer */ 1441 if ((flags & BDRV_O_PROTOCOL) == 0) { 1442 if (flags & BDRV_O_RDWR) { 1443 flags |= BDRV_O_ALLOW_RDWR; 1444 } 1445 if (flags & BDRV_O_SNAPSHOT) { 1446 snapshot_flags = bdrv_temp_snapshot_flags(flags); 1447 flags = bdrv_backing_flags(flags); 1448 } 1449 1450 assert(file == NULL); 1451 ret = bdrv_open_image(&file, filename, options, "file", 1452 bdrv_inherited_flags(flags), 1453 true, &local_err); 1454 if (ret < 0) { 1455 goto fail; 1456 } 1457 } 1458 1459 /* Image format probing */ 1460 if (!drv && file) { 1461 ret = find_image_format(file, filename, &drv, &local_err); 1462 if (ret < 0) { 1463 goto fail; 1464 } 1465 } else if (!drv) { 1466 error_setg(errp, "Must specify either driver or file"); 1467 ret = -EINVAL; 1468 goto fail; 1469 } 1470 1471 /* Open the image */ 1472 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err); 1473 if (ret < 0) { 1474 goto fail; 1475 } 1476 1477 if (file && (bs->file != file)) { 1478 bdrv_unref(file); 1479 file = NULL; 1480 } 1481 1482 /* If there is a backing file, use it */ 1483 if ((flags & BDRV_O_NO_BACKING) == 0) { 1484 QDict *backing_options; 1485 1486 qdict_extract_subqdict(options, &backing_options, "backing."); 1487 ret = bdrv_open_backing_file(bs, backing_options, &local_err); 1488 if (ret < 0) { 1489 goto close_and_fail; 1490 } 1491 } 1492 1493 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the 1494 * temporary snapshot afterwards. */ 1495 if (snapshot_flags) { 1496 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err); 1497 if (local_err) { 1498 goto close_and_fail; 1499 } 1500 } 1501 1502 /* Check if any unknown options were used */ 1503 if (options && (qdict_size(options) != 0)) { 1504 const QDictEntry *entry = qdict_first(options); 1505 if (flags & BDRV_O_PROTOCOL) { 1506 error_setg(errp, "Block protocol '%s' doesn't support the option " 1507 "'%s'", drv->format_name, entry->key); 1508 } else { 1509 error_setg(errp, "Block format '%s' used by device '%s' doesn't " 1510 "support the option '%s'", drv->format_name, 1511 bs->device_name, entry->key); 1512 } 1513 1514 ret = -EINVAL; 1515 goto close_and_fail; 1516 } 1517 1518 if (!bdrv_key_required(bs)) { 1519 bdrv_dev_change_media_cb(bs, true); 1520 } else if (!runstate_check(RUN_STATE_PRELAUNCH) 1521 && !runstate_check(RUN_STATE_INMIGRATE) 1522 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */ 1523 error_setg(errp, 1524 "Guest must be stopped for opening of encrypted image"); 1525 ret = -EBUSY; 1526 goto close_and_fail; 1527 } 1528 1529 QDECREF(options); 1530 *pbs = bs; 1531 return 0; 1532 1533 fail: 1534 if (file != NULL) { 1535 bdrv_unref(file); 1536 } 1537 QDECREF(bs->options); 1538 QDECREF(options); 1539 bs->options = NULL; 1540 if (!*pbs) { 1541 /* If *pbs is NULL, a new BDS has been created in this function and 1542 needs to be freed now. Otherwise, it does not need to be closed, 1543 since it has not really been opened yet. */ 1544 bdrv_unref(bs); 1545 } 1546 if (local_err) { 1547 error_propagate(errp, local_err); 1548 } 1549 return ret; 1550 1551 close_and_fail: 1552 /* See fail path, but now the BDS has to be always closed */ 1553 if (*pbs) { 1554 bdrv_close(bs); 1555 } else { 1556 bdrv_unref(bs); 1557 } 1558 QDECREF(options); 1559 if (local_err) { 1560 error_propagate(errp, local_err); 1561 } 1562 return ret; 1563 } 1564 1565 typedef struct BlockReopenQueueEntry { 1566 bool prepared; 1567 BDRVReopenState state; 1568 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry; 1569 } BlockReopenQueueEntry; 1570 1571 /* 1572 * Adds a BlockDriverState to a simple queue for an atomic, transactional 1573 * reopen of multiple devices. 1574 * 1575 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT 1576 * already performed, or alternatively may be NULL a new BlockReopenQueue will 1577 * be created and initialized. This newly created BlockReopenQueue should be 1578 * passed back in for subsequent calls that are intended to be of the same 1579 * atomic 'set'. 1580 * 1581 * bs is the BlockDriverState to add to the reopen queue. 1582 * 1583 * flags contains the open flags for the associated bs 1584 * 1585 * returns a pointer to bs_queue, which is either the newly allocated 1586 * bs_queue, or the existing bs_queue being used. 1587 * 1588 */ 1589 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue, 1590 BlockDriverState *bs, int flags) 1591 { 1592 assert(bs != NULL); 1593 1594 BlockReopenQueueEntry *bs_entry; 1595 if (bs_queue == NULL) { 1596 bs_queue = g_new0(BlockReopenQueue, 1); 1597 QSIMPLEQ_INIT(bs_queue); 1598 } 1599 1600 /* bdrv_open() masks this flag out */ 1601 flags &= ~BDRV_O_PROTOCOL; 1602 1603 if (bs->file) { 1604 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags)); 1605 } 1606 1607 bs_entry = g_new0(BlockReopenQueueEntry, 1); 1608 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry); 1609 1610 bs_entry->state.bs = bs; 1611 bs_entry->state.flags = flags; 1612 1613 return bs_queue; 1614 } 1615 1616 /* 1617 * Reopen multiple BlockDriverStates atomically & transactionally. 1618 * 1619 * The queue passed in (bs_queue) must have been built up previous 1620 * via bdrv_reopen_queue(). 1621 * 1622 * Reopens all BDS specified in the queue, with the appropriate 1623 * flags. All devices are prepared for reopen, and failure of any 1624 * device will cause all device changes to be abandonded, and intermediate 1625 * data cleaned up. 1626 * 1627 * If all devices prepare successfully, then the changes are committed 1628 * to all devices. 1629 * 1630 */ 1631 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp) 1632 { 1633 int ret = -1; 1634 BlockReopenQueueEntry *bs_entry, *next; 1635 Error *local_err = NULL; 1636 1637 assert(bs_queue != NULL); 1638 1639 bdrv_drain_all(); 1640 1641 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) { 1642 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) { 1643 error_propagate(errp, local_err); 1644 goto cleanup; 1645 } 1646 bs_entry->prepared = true; 1647 } 1648 1649 /* If we reach this point, we have success and just need to apply the 1650 * changes 1651 */ 1652 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) { 1653 bdrv_reopen_commit(&bs_entry->state); 1654 } 1655 1656 ret = 0; 1657 1658 cleanup: 1659 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) { 1660 if (ret && bs_entry->prepared) { 1661 bdrv_reopen_abort(&bs_entry->state); 1662 } 1663 g_free(bs_entry); 1664 } 1665 g_free(bs_queue); 1666 return ret; 1667 } 1668 1669 1670 /* Reopen a single BlockDriverState with the specified flags. */ 1671 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp) 1672 { 1673 int ret = -1; 1674 Error *local_err = NULL; 1675 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags); 1676 1677 ret = bdrv_reopen_multiple(queue, &local_err); 1678 if (local_err != NULL) { 1679 error_propagate(errp, local_err); 1680 } 1681 return ret; 1682 } 1683 1684 1685 /* 1686 * Prepares a BlockDriverState for reopen. All changes are staged in the 1687 * 'opaque' field of the BDRVReopenState, which is used and allocated by 1688 * the block driver layer .bdrv_reopen_prepare() 1689 * 1690 * bs is the BlockDriverState to reopen 1691 * flags are the new open flags 1692 * queue is the reopen queue 1693 * 1694 * Returns 0 on success, non-zero on error. On error errp will be set 1695 * as well. 1696 * 1697 * On failure, bdrv_reopen_abort() will be called to clean up any data. 1698 * It is the responsibility of the caller to then call the abort() or 1699 * commit() for any other BDS that have been left in a prepare() state 1700 * 1701 */ 1702 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue, 1703 Error **errp) 1704 { 1705 int ret = -1; 1706 Error *local_err = NULL; 1707 BlockDriver *drv; 1708 1709 assert(reopen_state != NULL); 1710 assert(reopen_state->bs->drv != NULL); 1711 drv = reopen_state->bs->drv; 1712 1713 /* if we are to stay read-only, do not allow permission change 1714 * to r/w */ 1715 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) && 1716 reopen_state->flags & BDRV_O_RDWR) { 1717 error_set(errp, QERR_DEVICE_IS_READ_ONLY, 1718 reopen_state->bs->device_name); 1719 goto error; 1720 } 1721 1722 1723 ret = bdrv_flush(reopen_state->bs); 1724 if (ret) { 1725 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive", 1726 strerror(-ret)); 1727 goto error; 1728 } 1729 1730 if (drv->bdrv_reopen_prepare) { 1731 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err); 1732 if (ret) { 1733 if (local_err != NULL) { 1734 error_propagate(errp, local_err); 1735 } else { 1736 error_setg(errp, "failed while preparing to reopen image '%s'", 1737 reopen_state->bs->filename); 1738 } 1739 goto error; 1740 } 1741 } else { 1742 /* It is currently mandatory to have a bdrv_reopen_prepare() 1743 * handler for each supported drv. */ 1744 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED, 1745 drv->format_name, reopen_state->bs->device_name, 1746 "reopening of file"); 1747 ret = -1; 1748 goto error; 1749 } 1750 1751 ret = 0; 1752 1753 error: 1754 return ret; 1755 } 1756 1757 /* 1758 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and 1759 * makes them final by swapping the staging BlockDriverState contents into 1760 * the active BlockDriverState contents. 1761 */ 1762 void bdrv_reopen_commit(BDRVReopenState *reopen_state) 1763 { 1764 BlockDriver *drv; 1765 1766 assert(reopen_state != NULL); 1767 drv = reopen_state->bs->drv; 1768 assert(drv != NULL); 1769 1770 /* If there are any driver level actions to take */ 1771 if (drv->bdrv_reopen_commit) { 1772 drv->bdrv_reopen_commit(reopen_state); 1773 } 1774 1775 /* set BDS specific flags now */ 1776 reopen_state->bs->open_flags = reopen_state->flags; 1777 reopen_state->bs->enable_write_cache = !!(reopen_state->flags & 1778 BDRV_O_CACHE_WB); 1779 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR); 1780 1781 bdrv_refresh_limits(reopen_state->bs); 1782 } 1783 1784 /* 1785 * Abort the reopen, and delete and free the staged changes in 1786 * reopen_state 1787 */ 1788 void bdrv_reopen_abort(BDRVReopenState *reopen_state) 1789 { 1790 BlockDriver *drv; 1791 1792 assert(reopen_state != NULL); 1793 drv = reopen_state->bs->drv; 1794 assert(drv != NULL); 1795 1796 if (drv->bdrv_reopen_abort) { 1797 drv->bdrv_reopen_abort(reopen_state); 1798 } 1799 } 1800 1801 1802 void bdrv_close(BlockDriverState *bs) 1803 { 1804 if (bs->job) { 1805 block_job_cancel_sync(bs->job); 1806 } 1807 bdrv_drain_all(); /* complete I/O */ 1808 bdrv_flush(bs); 1809 bdrv_drain_all(); /* in case flush left pending I/O */ 1810 notifier_list_notify(&bs->close_notifiers, bs); 1811 1812 if (bs->drv) { 1813 if (bs->backing_hd) { 1814 BlockDriverState *backing_hd = bs->backing_hd; 1815 bdrv_set_backing_hd(bs, NULL); 1816 bdrv_unref(backing_hd); 1817 } 1818 bs->drv->bdrv_close(bs); 1819 g_free(bs->opaque); 1820 bs->opaque = NULL; 1821 bs->drv = NULL; 1822 bs->copy_on_read = 0; 1823 bs->backing_file[0] = '\0'; 1824 bs->backing_format[0] = '\0'; 1825 bs->total_sectors = 0; 1826 bs->encrypted = 0; 1827 bs->valid_key = 0; 1828 bs->sg = 0; 1829 bs->growable = 0; 1830 bs->zero_beyond_eof = false; 1831 QDECREF(bs->options); 1832 bs->options = NULL; 1833 1834 if (bs->file != NULL) { 1835 bdrv_unref(bs->file); 1836 bs->file = NULL; 1837 } 1838 } 1839 1840 bdrv_dev_change_media_cb(bs, false); 1841 1842 /*throttling disk I/O limits*/ 1843 if (bs->io_limits_enabled) { 1844 bdrv_io_limits_disable(bs); 1845 } 1846 } 1847 1848 void bdrv_close_all(void) 1849 { 1850 BlockDriverState *bs; 1851 1852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 1853 AioContext *aio_context = bdrv_get_aio_context(bs); 1854 1855 aio_context_acquire(aio_context); 1856 bdrv_close(bs); 1857 aio_context_release(aio_context); 1858 } 1859 } 1860 1861 /* Check if any requests are in-flight (including throttled requests) */ 1862 static bool bdrv_requests_pending(BlockDriverState *bs) 1863 { 1864 if (!QLIST_EMPTY(&bs->tracked_requests)) { 1865 return true; 1866 } 1867 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) { 1868 return true; 1869 } 1870 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) { 1871 return true; 1872 } 1873 if (bs->file && bdrv_requests_pending(bs->file)) { 1874 return true; 1875 } 1876 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) { 1877 return true; 1878 } 1879 return false; 1880 } 1881 1882 /* 1883 * Wait for pending requests to complete across all BlockDriverStates 1884 * 1885 * This function does not flush data to disk, use bdrv_flush_all() for that 1886 * after calling this function. 1887 * 1888 * Note that completion of an asynchronous I/O operation can trigger any 1889 * number of other I/O operations on other devices---for example a coroutine 1890 * can be arbitrarily complex and a constant flow of I/O can come until the 1891 * coroutine is complete. Because of this, it is not possible to have a 1892 * function to drain a single device's I/O queue. 1893 */ 1894 void bdrv_drain_all(void) 1895 { 1896 /* Always run first iteration so any pending completion BHs run */ 1897 bool busy = true; 1898 BlockDriverState *bs; 1899 1900 while (busy) { 1901 busy = false; 1902 1903 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 1904 AioContext *aio_context = bdrv_get_aio_context(bs); 1905 bool bs_busy; 1906 1907 aio_context_acquire(aio_context); 1908 bdrv_flush_io_queue(bs); 1909 bdrv_start_throttled_reqs(bs); 1910 bs_busy = bdrv_requests_pending(bs); 1911 bs_busy |= aio_poll(aio_context, bs_busy); 1912 aio_context_release(aio_context); 1913 1914 busy |= bs_busy; 1915 } 1916 } 1917 } 1918 1919 /* make a BlockDriverState anonymous by removing from bdrv_state and 1920 * graph_bdrv_state list. 1921 Also, NULL terminate the device_name to prevent double remove */ 1922 void bdrv_make_anon(BlockDriverState *bs) 1923 { 1924 if (bs->device_name[0] != '\0') { 1925 QTAILQ_REMOVE(&bdrv_states, bs, device_list); 1926 } 1927 bs->device_name[0] = '\0'; 1928 if (bs->node_name[0] != '\0') { 1929 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list); 1930 } 1931 bs->node_name[0] = '\0'; 1932 } 1933 1934 static void bdrv_rebind(BlockDriverState *bs) 1935 { 1936 if (bs->drv && bs->drv->bdrv_rebind) { 1937 bs->drv->bdrv_rebind(bs); 1938 } 1939 } 1940 1941 static void bdrv_move_feature_fields(BlockDriverState *bs_dest, 1942 BlockDriverState *bs_src) 1943 { 1944 /* move some fields that need to stay attached to the device */ 1945 1946 /* dev info */ 1947 bs_dest->dev_ops = bs_src->dev_ops; 1948 bs_dest->dev_opaque = bs_src->dev_opaque; 1949 bs_dest->dev = bs_src->dev; 1950 bs_dest->guest_block_size = bs_src->guest_block_size; 1951 bs_dest->copy_on_read = bs_src->copy_on_read; 1952 1953 bs_dest->enable_write_cache = bs_src->enable_write_cache; 1954 1955 /* i/o throttled req */ 1956 memcpy(&bs_dest->throttle_state, 1957 &bs_src->throttle_state, 1958 sizeof(ThrottleState)); 1959 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0]; 1960 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1]; 1961 bs_dest->io_limits_enabled = bs_src->io_limits_enabled; 1962 1963 /* r/w error */ 1964 bs_dest->on_read_error = bs_src->on_read_error; 1965 bs_dest->on_write_error = bs_src->on_write_error; 1966 1967 /* i/o status */ 1968 bs_dest->iostatus_enabled = bs_src->iostatus_enabled; 1969 bs_dest->iostatus = bs_src->iostatus; 1970 1971 /* dirty bitmap */ 1972 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps; 1973 1974 /* reference count */ 1975 bs_dest->refcnt = bs_src->refcnt; 1976 1977 /* job */ 1978 bs_dest->job = bs_src->job; 1979 1980 /* keep the same entry in bdrv_states */ 1981 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name), 1982 bs_src->device_name); 1983 bs_dest->device_list = bs_src->device_list; 1984 memcpy(bs_dest->op_blockers, bs_src->op_blockers, 1985 sizeof(bs_dest->op_blockers)); 1986 } 1987 1988 /* 1989 * Swap bs contents for two image chains while they are live, 1990 * while keeping required fields on the BlockDriverState that is 1991 * actually attached to a device. 1992 * 1993 * This will modify the BlockDriverState fields, and swap contents 1994 * between bs_new and bs_old. Both bs_new and bs_old are modified. 1995 * 1996 * bs_new is required to be anonymous. 1997 * 1998 * This function does not create any image files. 1999 */ 2000 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old) 2001 { 2002 BlockDriverState tmp; 2003 2004 /* The code needs to swap the node_name but simply swapping node_list won't 2005 * work so first remove the nodes from the graph list, do the swap then 2006 * insert them back if needed. 2007 */ 2008 if (bs_new->node_name[0] != '\0') { 2009 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list); 2010 } 2011 if (bs_old->node_name[0] != '\0') { 2012 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list); 2013 } 2014 2015 /* bs_new must be anonymous and shouldn't have anything fancy enabled */ 2016 assert(bs_new->device_name[0] == '\0'); 2017 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps)); 2018 assert(bs_new->job == NULL); 2019 assert(bs_new->dev == NULL); 2020 assert(bs_new->io_limits_enabled == false); 2021 assert(!throttle_have_timer(&bs_new->throttle_state)); 2022 2023 tmp = *bs_new; 2024 *bs_new = *bs_old; 2025 *bs_old = tmp; 2026 2027 /* there are some fields that should not be swapped, move them back */ 2028 bdrv_move_feature_fields(&tmp, bs_old); 2029 bdrv_move_feature_fields(bs_old, bs_new); 2030 bdrv_move_feature_fields(bs_new, &tmp); 2031 2032 /* bs_new shouldn't be in bdrv_states even after the swap! */ 2033 assert(bs_new->device_name[0] == '\0'); 2034 2035 /* Check a few fields that should remain attached to the device */ 2036 assert(bs_new->dev == NULL); 2037 assert(bs_new->job == NULL); 2038 assert(bs_new->io_limits_enabled == false); 2039 assert(!throttle_have_timer(&bs_new->throttle_state)); 2040 2041 /* insert the nodes back into the graph node list if needed */ 2042 if (bs_new->node_name[0] != '\0') { 2043 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list); 2044 } 2045 if (bs_old->node_name[0] != '\0') { 2046 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list); 2047 } 2048 2049 bdrv_rebind(bs_new); 2050 bdrv_rebind(bs_old); 2051 } 2052 2053 /* 2054 * Add new bs contents at the top of an image chain while the chain is 2055 * live, while keeping required fields on the top layer. 2056 * 2057 * This will modify the BlockDriverState fields, and swap contents 2058 * between bs_new and bs_top. Both bs_new and bs_top are modified. 2059 * 2060 * bs_new is required to be anonymous. 2061 * 2062 * This function does not create any image files. 2063 */ 2064 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top) 2065 { 2066 bdrv_swap(bs_new, bs_top); 2067 2068 /* The contents of 'tmp' will become bs_top, as we are 2069 * swapping bs_new and bs_top contents. */ 2070 bdrv_set_backing_hd(bs_top, bs_new); 2071 } 2072 2073 static void bdrv_delete(BlockDriverState *bs) 2074 { 2075 assert(!bs->dev); 2076 assert(!bs->job); 2077 assert(bdrv_op_blocker_is_empty(bs)); 2078 assert(!bs->refcnt); 2079 assert(QLIST_EMPTY(&bs->dirty_bitmaps)); 2080 2081 bdrv_close(bs); 2082 2083 /* remove from list, if necessary */ 2084 bdrv_make_anon(bs); 2085 2086 g_free(bs); 2087 } 2088 2089 int bdrv_attach_dev(BlockDriverState *bs, void *dev) 2090 /* TODO change to DeviceState *dev when all users are qdevified */ 2091 { 2092 if (bs->dev) { 2093 return -EBUSY; 2094 } 2095 bs->dev = dev; 2096 bdrv_iostatus_reset(bs); 2097 return 0; 2098 } 2099 2100 /* TODO qdevified devices don't use this, remove when devices are qdevified */ 2101 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev) 2102 { 2103 if (bdrv_attach_dev(bs, dev) < 0) { 2104 abort(); 2105 } 2106 } 2107 2108 void bdrv_detach_dev(BlockDriverState *bs, void *dev) 2109 /* TODO change to DeviceState *dev when all users are qdevified */ 2110 { 2111 assert(bs->dev == dev); 2112 bs->dev = NULL; 2113 bs->dev_ops = NULL; 2114 bs->dev_opaque = NULL; 2115 bs->guest_block_size = 512; 2116 } 2117 2118 /* TODO change to return DeviceState * when all users are qdevified */ 2119 void *bdrv_get_attached_dev(BlockDriverState *bs) 2120 { 2121 return bs->dev; 2122 } 2123 2124 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops, 2125 void *opaque) 2126 { 2127 bs->dev_ops = ops; 2128 bs->dev_opaque = opaque; 2129 } 2130 2131 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load) 2132 { 2133 if (bs->dev_ops && bs->dev_ops->change_media_cb) { 2134 bool tray_was_closed = !bdrv_dev_is_tray_open(bs); 2135 bs->dev_ops->change_media_cb(bs->dev_opaque, load); 2136 if (tray_was_closed) { 2137 /* tray open */ 2138 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs), 2139 true, &error_abort); 2140 } 2141 if (load) { 2142 /* tray close */ 2143 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs), 2144 false, &error_abort); 2145 } 2146 } 2147 } 2148 2149 bool bdrv_dev_has_removable_media(BlockDriverState *bs) 2150 { 2151 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb); 2152 } 2153 2154 void bdrv_dev_eject_request(BlockDriverState *bs, bool force) 2155 { 2156 if (bs->dev_ops && bs->dev_ops->eject_request_cb) { 2157 bs->dev_ops->eject_request_cb(bs->dev_opaque, force); 2158 } 2159 } 2160 2161 bool bdrv_dev_is_tray_open(BlockDriverState *bs) 2162 { 2163 if (bs->dev_ops && bs->dev_ops->is_tray_open) { 2164 return bs->dev_ops->is_tray_open(bs->dev_opaque); 2165 } 2166 return false; 2167 } 2168 2169 static void bdrv_dev_resize_cb(BlockDriverState *bs) 2170 { 2171 if (bs->dev_ops && bs->dev_ops->resize_cb) { 2172 bs->dev_ops->resize_cb(bs->dev_opaque); 2173 } 2174 } 2175 2176 bool bdrv_dev_is_medium_locked(BlockDriverState *bs) 2177 { 2178 if (bs->dev_ops && bs->dev_ops->is_medium_locked) { 2179 return bs->dev_ops->is_medium_locked(bs->dev_opaque); 2180 } 2181 return false; 2182 } 2183 2184 /* 2185 * Run consistency checks on an image 2186 * 2187 * Returns 0 if the check could be completed (it doesn't mean that the image is 2188 * free of errors) or -errno when an internal error occurred. The results of the 2189 * check are stored in res. 2190 */ 2191 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix) 2192 { 2193 if (bs->drv->bdrv_check == NULL) { 2194 return -ENOTSUP; 2195 } 2196 2197 memset(res, 0, sizeof(*res)); 2198 return bs->drv->bdrv_check(bs, res, fix); 2199 } 2200 2201 #define COMMIT_BUF_SECTORS 2048 2202 2203 /* commit COW file into the raw image */ 2204 int bdrv_commit(BlockDriverState *bs) 2205 { 2206 BlockDriver *drv = bs->drv; 2207 int64_t sector, total_sectors, length, backing_length; 2208 int n, ro, open_flags; 2209 int ret = 0; 2210 uint8_t *buf = NULL; 2211 char filename[PATH_MAX]; 2212 2213 if (!drv) 2214 return -ENOMEDIUM; 2215 2216 if (!bs->backing_hd) { 2217 return -ENOTSUP; 2218 } 2219 2220 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) || 2221 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) { 2222 return -EBUSY; 2223 } 2224 2225 ro = bs->backing_hd->read_only; 2226 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */ 2227 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename); 2228 open_flags = bs->backing_hd->open_flags; 2229 2230 if (ro) { 2231 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) { 2232 return -EACCES; 2233 } 2234 } 2235 2236 length = bdrv_getlength(bs); 2237 if (length < 0) { 2238 ret = length; 2239 goto ro_cleanup; 2240 } 2241 2242 backing_length = bdrv_getlength(bs->backing_hd); 2243 if (backing_length < 0) { 2244 ret = backing_length; 2245 goto ro_cleanup; 2246 } 2247 2248 /* If our top snapshot is larger than the backing file image, 2249 * grow the backing file image if possible. If not possible, 2250 * we must return an error */ 2251 if (length > backing_length) { 2252 ret = bdrv_truncate(bs->backing_hd, length); 2253 if (ret < 0) { 2254 goto ro_cleanup; 2255 } 2256 } 2257 2258 total_sectors = length >> BDRV_SECTOR_BITS; 2259 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE); 2260 2261 for (sector = 0; sector < total_sectors; sector += n) { 2262 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n); 2263 if (ret < 0) { 2264 goto ro_cleanup; 2265 } 2266 if (ret) { 2267 ret = bdrv_read(bs, sector, buf, n); 2268 if (ret < 0) { 2269 goto ro_cleanup; 2270 } 2271 2272 ret = bdrv_write(bs->backing_hd, sector, buf, n); 2273 if (ret < 0) { 2274 goto ro_cleanup; 2275 } 2276 } 2277 } 2278 2279 if (drv->bdrv_make_empty) { 2280 ret = drv->bdrv_make_empty(bs); 2281 if (ret < 0) { 2282 goto ro_cleanup; 2283 } 2284 bdrv_flush(bs); 2285 } 2286 2287 /* 2288 * Make sure all data we wrote to the backing device is actually 2289 * stable on disk. 2290 */ 2291 if (bs->backing_hd) { 2292 bdrv_flush(bs->backing_hd); 2293 } 2294 2295 ret = 0; 2296 ro_cleanup: 2297 g_free(buf); 2298 2299 if (ro) { 2300 /* ignoring error return here */ 2301 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL); 2302 } 2303 2304 return ret; 2305 } 2306 2307 int bdrv_commit_all(void) 2308 { 2309 BlockDriverState *bs; 2310 2311 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 2312 AioContext *aio_context = bdrv_get_aio_context(bs); 2313 2314 aio_context_acquire(aio_context); 2315 if (bs->drv && bs->backing_hd) { 2316 int ret = bdrv_commit(bs); 2317 if (ret < 0) { 2318 aio_context_release(aio_context); 2319 return ret; 2320 } 2321 } 2322 aio_context_release(aio_context); 2323 } 2324 return 0; 2325 } 2326 2327 /** 2328 * Remove an active request from the tracked requests list 2329 * 2330 * This function should be called when a tracked request is completing. 2331 */ 2332 static void tracked_request_end(BdrvTrackedRequest *req) 2333 { 2334 if (req->serialising) { 2335 req->bs->serialising_in_flight--; 2336 } 2337 2338 QLIST_REMOVE(req, list); 2339 qemu_co_queue_restart_all(&req->wait_queue); 2340 } 2341 2342 /** 2343 * Add an active request to the tracked requests list 2344 */ 2345 static void tracked_request_begin(BdrvTrackedRequest *req, 2346 BlockDriverState *bs, 2347 int64_t offset, 2348 unsigned int bytes, bool is_write) 2349 { 2350 *req = (BdrvTrackedRequest){ 2351 .bs = bs, 2352 .offset = offset, 2353 .bytes = bytes, 2354 .is_write = is_write, 2355 .co = qemu_coroutine_self(), 2356 .serialising = false, 2357 .overlap_offset = offset, 2358 .overlap_bytes = bytes, 2359 }; 2360 2361 qemu_co_queue_init(&req->wait_queue); 2362 2363 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list); 2364 } 2365 2366 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align) 2367 { 2368 int64_t overlap_offset = req->offset & ~(align - 1); 2369 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align) 2370 - overlap_offset; 2371 2372 if (!req->serialising) { 2373 req->bs->serialising_in_flight++; 2374 req->serialising = true; 2375 } 2376 2377 req->overlap_offset = MIN(req->overlap_offset, overlap_offset); 2378 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes); 2379 } 2380 2381 /** 2382 * Round a region to cluster boundaries 2383 */ 2384 void bdrv_round_to_clusters(BlockDriverState *bs, 2385 int64_t sector_num, int nb_sectors, 2386 int64_t *cluster_sector_num, 2387 int *cluster_nb_sectors) 2388 { 2389 BlockDriverInfo bdi; 2390 2391 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) { 2392 *cluster_sector_num = sector_num; 2393 *cluster_nb_sectors = nb_sectors; 2394 } else { 2395 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE; 2396 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c); 2397 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num + 2398 nb_sectors, c); 2399 } 2400 } 2401 2402 static int bdrv_get_cluster_size(BlockDriverState *bs) 2403 { 2404 BlockDriverInfo bdi; 2405 int ret; 2406 2407 ret = bdrv_get_info(bs, &bdi); 2408 if (ret < 0 || bdi.cluster_size == 0) { 2409 return bs->request_alignment; 2410 } else { 2411 return bdi.cluster_size; 2412 } 2413 } 2414 2415 static bool tracked_request_overlaps(BdrvTrackedRequest *req, 2416 int64_t offset, unsigned int bytes) 2417 { 2418 /* aaaa bbbb */ 2419 if (offset >= req->overlap_offset + req->overlap_bytes) { 2420 return false; 2421 } 2422 /* bbbb aaaa */ 2423 if (req->overlap_offset >= offset + bytes) { 2424 return false; 2425 } 2426 return true; 2427 } 2428 2429 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self) 2430 { 2431 BlockDriverState *bs = self->bs; 2432 BdrvTrackedRequest *req; 2433 bool retry; 2434 bool waited = false; 2435 2436 if (!bs->serialising_in_flight) { 2437 return false; 2438 } 2439 2440 do { 2441 retry = false; 2442 QLIST_FOREACH(req, &bs->tracked_requests, list) { 2443 if (req == self || (!req->serialising && !self->serialising)) { 2444 continue; 2445 } 2446 if (tracked_request_overlaps(req, self->overlap_offset, 2447 self->overlap_bytes)) 2448 { 2449 /* Hitting this means there was a reentrant request, for 2450 * example, a block driver issuing nested requests. This must 2451 * never happen since it means deadlock. 2452 */ 2453 assert(qemu_coroutine_self() != req->co); 2454 2455 /* If the request is already (indirectly) waiting for us, or 2456 * will wait for us as soon as it wakes up, then just go on 2457 * (instead of producing a deadlock in the former case). */ 2458 if (!req->waiting_for) { 2459 self->waiting_for = req; 2460 qemu_co_queue_wait(&req->wait_queue); 2461 self->waiting_for = NULL; 2462 retry = true; 2463 waited = true; 2464 break; 2465 } 2466 } 2467 } 2468 } while (retry); 2469 2470 return waited; 2471 } 2472 2473 /* 2474 * Return values: 2475 * 0 - success 2476 * -EINVAL - backing format specified, but no file 2477 * -ENOSPC - can't update the backing file because no space is left in the 2478 * image file header 2479 * -ENOTSUP - format driver doesn't support changing the backing file 2480 */ 2481 int bdrv_change_backing_file(BlockDriverState *bs, 2482 const char *backing_file, const char *backing_fmt) 2483 { 2484 BlockDriver *drv = bs->drv; 2485 int ret; 2486 2487 /* Backing file format doesn't make sense without a backing file */ 2488 if (backing_fmt && !backing_file) { 2489 return -EINVAL; 2490 } 2491 2492 if (drv->bdrv_change_backing_file != NULL) { 2493 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt); 2494 } else { 2495 ret = -ENOTSUP; 2496 } 2497 2498 if (ret == 0) { 2499 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: ""); 2500 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: ""); 2501 } 2502 return ret; 2503 } 2504 2505 /* 2506 * Finds the image layer in the chain that has 'bs' as its backing file. 2507 * 2508 * active is the current topmost image. 2509 * 2510 * Returns NULL if bs is not found in active's image chain, 2511 * or if active == bs. 2512 * 2513 * Returns the bottommost base image if bs == NULL. 2514 */ 2515 BlockDriverState *bdrv_find_overlay(BlockDriverState *active, 2516 BlockDriverState *bs) 2517 { 2518 while (active && bs != active->backing_hd) { 2519 active = active->backing_hd; 2520 } 2521 2522 return active; 2523 } 2524 2525 /* Given a BDS, searches for the base layer. */ 2526 BlockDriverState *bdrv_find_base(BlockDriverState *bs) 2527 { 2528 return bdrv_find_overlay(bs, NULL); 2529 } 2530 2531 typedef struct BlkIntermediateStates { 2532 BlockDriverState *bs; 2533 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry; 2534 } BlkIntermediateStates; 2535 2536 2537 /* 2538 * Drops images above 'base' up to and including 'top', and sets the image 2539 * above 'top' to have base as its backing file. 2540 * 2541 * Requires that the overlay to 'top' is opened r/w, so that the backing file 2542 * information in 'bs' can be properly updated. 2543 * 2544 * E.g., this will convert the following chain: 2545 * bottom <- base <- intermediate <- top <- active 2546 * 2547 * to 2548 * 2549 * bottom <- base <- active 2550 * 2551 * It is allowed for bottom==base, in which case it converts: 2552 * 2553 * base <- intermediate <- top <- active 2554 * 2555 * to 2556 * 2557 * base <- active 2558 * 2559 * If backing_file_str is non-NULL, it will be used when modifying top's 2560 * overlay image metadata. 2561 * 2562 * Error conditions: 2563 * if active == top, that is considered an error 2564 * 2565 */ 2566 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top, 2567 BlockDriverState *base, const char *backing_file_str) 2568 { 2569 BlockDriverState *intermediate; 2570 BlockDriverState *base_bs = NULL; 2571 BlockDriverState *new_top_bs = NULL; 2572 BlkIntermediateStates *intermediate_state, *next; 2573 int ret = -EIO; 2574 2575 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete; 2576 QSIMPLEQ_INIT(&states_to_delete); 2577 2578 if (!top->drv || !base->drv) { 2579 goto exit; 2580 } 2581 2582 new_top_bs = bdrv_find_overlay(active, top); 2583 2584 if (new_top_bs == NULL) { 2585 /* we could not find the image above 'top', this is an error */ 2586 goto exit; 2587 } 2588 2589 /* special case of new_top_bs->backing_hd already pointing to base - nothing 2590 * to do, no intermediate images */ 2591 if (new_top_bs->backing_hd == base) { 2592 ret = 0; 2593 goto exit; 2594 } 2595 2596 intermediate = top; 2597 2598 /* now we will go down through the list, and add each BDS we find 2599 * into our deletion queue, until we hit the 'base' 2600 */ 2601 while (intermediate) { 2602 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates)); 2603 intermediate_state->bs = intermediate; 2604 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry); 2605 2606 if (intermediate->backing_hd == base) { 2607 base_bs = intermediate->backing_hd; 2608 break; 2609 } 2610 intermediate = intermediate->backing_hd; 2611 } 2612 if (base_bs == NULL) { 2613 /* something went wrong, we did not end at the base. safely 2614 * unravel everything, and exit with error */ 2615 goto exit; 2616 } 2617 2618 /* success - we can delete the intermediate states, and link top->base */ 2619 backing_file_str = backing_file_str ? backing_file_str : base_bs->filename; 2620 ret = bdrv_change_backing_file(new_top_bs, backing_file_str, 2621 base_bs->drv ? base_bs->drv->format_name : ""); 2622 if (ret) { 2623 goto exit; 2624 } 2625 bdrv_set_backing_hd(new_top_bs, base_bs); 2626 2627 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) { 2628 /* so that bdrv_close() does not recursively close the chain */ 2629 bdrv_set_backing_hd(intermediate_state->bs, NULL); 2630 bdrv_unref(intermediate_state->bs); 2631 } 2632 ret = 0; 2633 2634 exit: 2635 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) { 2636 g_free(intermediate_state); 2637 } 2638 return ret; 2639 } 2640 2641 2642 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset, 2643 size_t size) 2644 { 2645 int64_t len; 2646 2647 if (size > INT_MAX) { 2648 return -EIO; 2649 } 2650 2651 if (!bdrv_is_inserted(bs)) 2652 return -ENOMEDIUM; 2653 2654 if (bs->growable) 2655 return 0; 2656 2657 len = bdrv_getlength(bs); 2658 2659 if (offset < 0) 2660 return -EIO; 2661 2662 if ((offset > len) || (len - offset < size)) 2663 return -EIO; 2664 2665 return 0; 2666 } 2667 2668 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num, 2669 int nb_sectors) 2670 { 2671 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) { 2672 return -EIO; 2673 } 2674 2675 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE, 2676 nb_sectors * BDRV_SECTOR_SIZE); 2677 } 2678 2679 typedef struct RwCo { 2680 BlockDriverState *bs; 2681 int64_t offset; 2682 QEMUIOVector *qiov; 2683 bool is_write; 2684 int ret; 2685 BdrvRequestFlags flags; 2686 } RwCo; 2687 2688 static void coroutine_fn bdrv_rw_co_entry(void *opaque) 2689 { 2690 RwCo *rwco = opaque; 2691 2692 if (!rwco->is_write) { 2693 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset, 2694 rwco->qiov->size, rwco->qiov, 2695 rwco->flags); 2696 } else { 2697 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset, 2698 rwco->qiov->size, rwco->qiov, 2699 rwco->flags); 2700 } 2701 } 2702 2703 /* 2704 * Process a vectored synchronous request using coroutines 2705 */ 2706 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset, 2707 QEMUIOVector *qiov, bool is_write, 2708 BdrvRequestFlags flags) 2709 { 2710 Coroutine *co; 2711 RwCo rwco = { 2712 .bs = bs, 2713 .offset = offset, 2714 .qiov = qiov, 2715 .is_write = is_write, 2716 .ret = NOT_DONE, 2717 .flags = flags, 2718 }; 2719 2720 /** 2721 * In sync call context, when the vcpu is blocked, this throttling timer 2722 * will not fire; so the I/O throttling function has to be disabled here 2723 * if it has been enabled. 2724 */ 2725 if (bs->io_limits_enabled) { 2726 fprintf(stderr, "Disabling I/O throttling on '%s' due " 2727 "to synchronous I/O.\n", bdrv_get_device_name(bs)); 2728 bdrv_io_limits_disable(bs); 2729 } 2730 2731 if (qemu_in_coroutine()) { 2732 /* Fast-path if already in coroutine context */ 2733 bdrv_rw_co_entry(&rwco); 2734 } else { 2735 AioContext *aio_context = bdrv_get_aio_context(bs); 2736 2737 co = qemu_coroutine_create(bdrv_rw_co_entry); 2738 qemu_coroutine_enter(co, &rwco); 2739 while (rwco.ret == NOT_DONE) { 2740 aio_poll(aio_context, true); 2741 } 2742 } 2743 return rwco.ret; 2744 } 2745 2746 /* 2747 * Process a synchronous request using coroutines 2748 */ 2749 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf, 2750 int nb_sectors, bool is_write, BdrvRequestFlags flags) 2751 { 2752 QEMUIOVector qiov; 2753 struct iovec iov = { 2754 .iov_base = (void *)buf, 2755 .iov_len = nb_sectors * BDRV_SECTOR_SIZE, 2756 }; 2757 2758 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) { 2759 return -EINVAL; 2760 } 2761 2762 qemu_iovec_init_external(&qiov, &iov, 1); 2763 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS, 2764 &qiov, is_write, flags); 2765 } 2766 2767 /* return < 0 if error. See bdrv_write() for the return codes */ 2768 int bdrv_read(BlockDriverState *bs, int64_t sector_num, 2769 uint8_t *buf, int nb_sectors) 2770 { 2771 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0); 2772 } 2773 2774 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */ 2775 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num, 2776 uint8_t *buf, int nb_sectors) 2777 { 2778 bool enabled; 2779 int ret; 2780 2781 enabled = bs->io_limits_enabled; 2782 bs->io_limits_enabled = false; 2783 ret = bdrv_read(bs, sector_num, buf, nb_sectors); 2784 bs->io_limits_enabled = enabled; 2785 return ret; 2786 } 2787 2788 /* Return < 0 if error. Important errors are: 2789 -EIO generic I/O error (may happen for all errors) 2790 -ENOMEDIUM No media inserted. 2791 -EINVAL Invalid sector number or nb_sectors 2792 -EACCES Trying to write a read-only device 2793 */ 2794 int bdrv_write(BlockDriverState *bs, int64_t sector_num, 2795 const uint8_t *buf, int nb_sectors) 2796 { 2797 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0); 2798 } 2799 2800 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, 2801 int nb_sectors, BdrvRequestFlags flags) 2802 { 2803 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true, 2804 BDRV_REQ_ZERO_WRITE | flags); 2805 } 2806 2807 /* 2808 * Completely zero out a block device with the help of bdrv_write_zeroes. 2809 * The operation is sped up by checking the block status and only writing 2810 * zeroes to the device if they currently do not return zeroes. Optional 2811 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP). 2812 * 2813 * Returns < 0 on error, 0 on success. For error codes see bdrv_write(). 2814 */ 2815 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags) 2816 { 2817 int64_t target_size; 2818 int64_t ret, nb_sectors, sector_num = 0; 2819 int n; 2820 2821 target_size = bdrv_getlength(bs); 2822 if (target_size < 0) { 2823 return target_size; 2824 } 2825 target_size /= BDRV_SECTOR_SIZE; 2826 2827 for (;;) { 2828 nb_sectors = target_size - sector_num; 2829 if (nb_sectors <= 0) { 2830 return 0; 2831 } 2832 if (nb_sectors > INT_MAX) { 2833 nb_sectors = INT_MAX; 2834 } 2835 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n); 2836 if (ret < 0) { 2837 error_report("error getting block status at sector %" PRId64 ": %s", 2838 sector_num, strerror(-ret)); 2839 return ret; 2840 } 2841 if (ret & BDRV_BLOCK_ZERO) { 2842 sector_num += n; 2843 continue; 2844 } 2845 ret = bdrv_write_zeroes(bs, sector_num, n, flags); 2846 if (ret < 0) { 2847 error_report("error writing zeroes at sector %" PRId64 ": %s", 2848 sector_num, strerror(-ret)); 2849 return ret; 2850 } 2851 sector_num += n; 2852 } 2853 } 2854 2855 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes) 2856 { 2857 QEMUIOVector qiov; 2858 struct iovec iov = { 2859 .iov_base = (void *)buf, 2860 .iov_len = bytes, 2861 }; 2862 int ret; 2863 2864 if (bytes < 0) { 2865 return -EINVAL; 2866 } 2867 2868 qemu_iovec_init_external(&qiov, &iov, 1); 2869 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0); 2870 if (ret < 0) { 2871 return ret; 2872 } 2873 2874 return bytes; 2875 } 2876 2877 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov) 2878 { 2879 int ret; 2880 2881 ret = bdrv_prwv_co(bs, offset, qiov, true, 0); 2882 if (ret < 0) { 2883 return ret; 2884 } 2885 2886 return qiov->size; 2887 } 2888 2889 int bdrv_pwrite(BlockDriverState *bs, int64_t offset, 2890 const void *buf, int bytes) 2891 { 2892 QEMUIOVector qiov; 2893 struct iovec iov = { 2894 .iov_base = (void *) buf, 2895 .iov_len = bytes, 2896 }; 2897 2898 if (bytes < 0) { 2899 return -EINVAL; 2900 } 2901 2902 qemu_iovec_init_external(&qiov, &iov, 1); 2903 return bdrv_pwritev(bs, offset, &qiov); 2904 } 2905 2906 /* 2907 * Writes to the file and ensures that no writes are reordered across this 2908 * request (acts as a barrier) 2909 * 2910 * Returns 0 on success, -errno in error cases. 2911 */ 2912 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset, 2913 const void *buf, int count) 2914 { 2915 int ret; 2916 2917 ret = bdrv_pwrite(bs, offset, buf, count); 2918 if (ret < 0) { 2919 return ret; 2920 } 2921 2922 /* No flush needed for cache modes that already do it */ 2923 if (bs->enable_write_cache) { 2924 bdrv_flush(bs); 2925 } 2926 2927 return 0; 2928 } 2929 2930 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs, 2931 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) 2932 { 2933 /* Perform I/O through a temporary buffer so that users who scribble over 2934 * their read buffer while the operation is in progress do not end up 2935 * modifying the image file. This is critical for zero-copy guest I/O 2936 * where anything might happen inside guest memory. 2937 */ 2938 void *bounce_buffer; 2939 2940 BlockDriver *drv = bs->drv; 2941 struct iovec iov; 2942 QEMUIOVector bounce_qiov; 2943 int64_t cluster_sector_num; 2944 int cluster_nb_sectors; 2945 size_t skip_bytes; 2946 int ret; 2947 2948 /* Cover entire cluster so no additional backing file I/O is required when 2949 * allocating cluster in the image file. 2950 */ 2951 bdrv_round_to_clusters(bs, sector_num, nb_sectors, 2952 &cluster_sector_num, &cluster_nb_sectors); 2953 2954 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, 2955 cluster_sector_num, cluster_nb_sectors); 2956 2957 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE; 2958 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len); 2959 qemu_iovec_init_external(&bounce_qiov, &iov, 1); 2960 2961 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors, 2962 &bounce_qiov); 2963 if (ret < 0) { 2964 goto err; 2965 } 2966 2967 if (drv->bdrv_co_write_zeroes && 2968 buffer_is_zero(bounce_buffer, iov.iov_len)) { 2969 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num, 2970 cluster_nb_sectors, 0); 2971 } else { 2972 /* This does not change the data on the disk, it is not necessary 2973 * to flush even in cache=writethrough mode. 2974 */ 2975 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors, 2976 &bounce_qiov); 2977 } 2978 2979 if (ret < 0) { 2980 /* It might be okay to ignore write errors for guest requests. If this 2981 * is a deliberate copy-on-read then we don't want to ignore the error. 2982 * Simply report it in all cases. 2983 */ 2984 goto err; 2985 } 2986 2987 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE; 2988 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes, 2989 nb_sectors * BDRV_SECTOR_SIZE); 2990 2991 err: 2992 qemu_vfree(bounce_buffer); 2993 return ret; 2994 } 2995 2996 /* 2997 * Forwards an already correctly aligned request to the BlockDriver. This 2998 * handles copy on read and zeroing after EOF; any other features must be 2999 * implemented by the caller. 3000 */ 3001 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs, 3002 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, 3003 int64_t align, QEMUIOVector *qiov, int flags) 3004 { 3005 BlockDriver *drv = bs->drv; 3006 int ret; 3007 3008 int64_t sector_num = offset >> BDRV_SECTOR_BITS; 3009 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; 3010 3011 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); 3012 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); 3013 assert(!qiov || bytes == qiov->size); 3014 3015 /* Handle Copy on Read and associated serialisation */ 3016 if (flags & BDRV_REQ_COPY_ON_READ) { 3017 /* If we touch the same cluster it counts as an overlap. This 3018 * guarantees that allocating writes will be serialized and not race 3019 * with each other for the same cluster. For example, in copy-on-read 3020 * it ensures that the CoR read and write operations are atomic and 3021 * guest writes cannot interleave between them. */ 3022 mark_request_serialising(req, bdrv_get_cluster_size(bs)); 3023 } 3024 3025 wait_serialising_requests(req); 3026 3027 if (flags & BDRV_REQ_COPY_ON_READ) { 3028 int pnum; 3029 3030 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum); 3031 if (ret < 0) { 3032 goto out; 3033 } 3034 3035 if (!ret || pnum != nb_sectors) { 3036 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov); 3037 goto out; 3038 } 3039 } 3040 3041 /* Forward the request to the BlockDriver */ 3042 if (!(bs->zero_beyond_eof && bs->growable)) { 3043 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov); 3044 } else { 3045 /* Read zeros after EOF of growable BDSes */ 3046 int64_t len, total_sectors, max_nb_sectors; 3047 3048 len = bdrv_getlength(bs); 3049 if (len < 0) { 3050 ret = len; 3051 goto out; 3052 } 3053 3054 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE); 3055 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num), 3056 align >> BDRV_SECTOR_BITS); 3057 if (max_nb_sectors > 0) { 3058 QEMUIOVector local_qiov; 3059 size_t local_sectors; 3060 3061 max_nb_sectors = MIN(max_nb_sectors, SIZE_MAX / BDRV_SECTOR_BITS); 3062 local_sectors = MIN(max_nb_sectors, nb_sectors); 3063 3064 qemu_iovec_init(&local_qiov, qiov->niov); 3065 qemu_iovec_concat(&local_qiov, qiov, 0, 3066 local_sectors * BDRV_SECTOR_SIZE); 3067 3068 ret = drv->bdrv_co_readv(bs, sector_num, local_sectors, 3069 &local_qiov); 3070 3071 qemu_iovec_destroy(&local_qiov); 3072 } else { 3073 ret = 0; 3074 } 3075 3076 /* Reading beyond end of file is supposed to produce zeroes */ 3077 if (ret == 0 && total_sectors < sector_num + nb_sectors) { 3078 uint64_t offset = MAX(0, total_sectors - sector_num); 3079 uint64_t bytes = (sector_num + nb_sectors - offset) * 3080 BDRV_SECTOR_SIZE; 3081 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes); 3082 } 3083 } 3084 3085 out: 3086 return ret; 3087 } 3088 3089 /* 3090 * Handle a read request in coroutine context 3091 */ 3092 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, 3093 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 3094 BdrvRequestFlags flags) 3095 { 3096 BlockDriver *drv = bs->drv; 3097 BdrvTrackedRequest req; 3098 3099 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ 3100 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); 3101 uint8_t *head_buf = NULL; 3102 uint8_t *tail_buf = NULL; 3103 QEMUIOVector local_qiov; 3104 bool use_local_qiov = false; 3105 int ret; 3106 3107 if (!drv) { 3108 return -ENOMEDIUM; 3109 } 3110 if (bdrv_check_byte_request(bs, offset, bytes)) { 3111 return -EIO; 3112 } 3113 3114 if (bs->copy_on_read) { 3115 flags |= BDRV_REQ_COPY_ON_READ; 3116 } 3117 3118 /* throttling disk I/O */ 3119 if (bs->io_limits_enabled) { 3120 bdrv_io_limits_intercept(bs, bytes, false); 3121 } 3122 3123 /* Align read if necessary by padding qiov */ 3124 if (offset & (align - 1)) { 3125 head_buf = qemu_blockalign(bs, align); 3126 qemu_iovec_init(&local_qiov, qiov->niov + 2); 3127 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); 3128 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3129 use_local_qiov = true; 3130 3131 bytes += offset & (align - 1); 3132 offset = offset & ~(align - 1); 3133 } 3134 3135 if ((offset + bytes) & (align - 1)) { 3136 if (!use_local_qiov) { 3137 qemu_iovec_init(&local_qiov, qiov->niov + 1); 3138 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3139 use_local_qiov = true; 3140 } 3141 tail_buf = qemu_blockalign(bs, align); 3142 qemu_iovec_add(&local_qiov, tail_buf, 3143 align - ((offset + bytes) & (align - 1))); 3144 3145 bytes = ROUND_UP(bytes, align); 3146 } 3147 3148 tracked_request_begin(&req, bs, offset, bytes, false); 3149 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align, 3150 use_local_qiov ? &local_qiov : qiov, 3151 flags); 3152 tracked_request_end(&req); 3153 3154 if (use_local_qiov) { 3155 qemu_iovec_destroy(&local_qiov); 3156 qemu_vfree(head_buf); 3157 qemu_vfree(tail_buf); 3158 } 3159 3160 return ret; 3161 } 3162 3163 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs, 3164 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, 3165 BdrvRequestFlags flags) 3166 { 3167 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) { 3168 return -EINVAL; 3169 } 3170 3171 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS, 3172 nb_sectors << BDRV_SECTOR_BITS, qiov, flags); 3173 } 3174 3175 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num, 3176 int nb_sectors, QEMUIOVector *qiov) 3177 { 3178 trace_bdrv_co_readv(bs, sector_num, nb_sectors); 3179 3180 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0); 3181 } 3182 3183 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs, 3184 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) 3185 { 3186 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors); 3187 3188 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 3189 BDRV_REQ_COPY_ON_READ); 3190 } 3191 3192 /* if no limit is specified in the BlockLimits use a default 3193 * of 32768 512-byte sectors (16 MiB) per request. 3194 */ 3195 #define MAX_WRITE_ZEROES_DEFAULT 32768 3196 3197 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, 3198 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags) 3199 { 3200 BlockDriver *drv = bs->drv; 3201 QEMUIOVector qiov; 3202 struct iovec iov = {0}; 3203 int ret = 0; 3204 3205 int max_write_zeroes = bs->bl.max_write_zeroes ? 3206 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT; 3207 3208 while (nb_sectors > 0 && !ret) { 3209 int num = nb_sectors; 3210 3211 /* Align request. Block drivers can expect the "bulk" of the request 3212 * to be aligned. 3213 */ 3214 if (bs->bl.write_zeroes_alignment 3215 && num > bs->bl.write_zeroes_alignment) { 3216 if (sector_num % bs->bl.write_zeroes_alignment != 0) { 3217 /* Make a small request up to the first aligned sector. */ 3218 num = bs->bl.write_zeroes_alignment; 3219 num -= sector_num % bs->bl.write_zeroes_alignment; 3220 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) { 3221 /* Shorten the request to the last aligned sector. num cannot 3222 * underflow because num > bs->bl.write_zeroes_alignment. 3223 */ 3224 num -= (sector_num + num) % bs->bl.write_zeroes_alignment; 3225 } 3226 } 3227 3228 /* limit request size */ 3229 if (num > max_write_zeroes) { 3230 num = max_write_zeroes; 3231 } 3232 3233 ret = -ENOTSUP; 3234 /* First try the efficient write zeroes operation */ 3235 if (drv->bdrv_co_write_zeroes) { 3236 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags); 3237 } 3238 3239 if (ret == -ENOTSUP) { 3240 /* Fall back to bounce buffer if write zeroes is unsupported */ 3241 iov.iov_len = num * BDRV_SECTOR_SIZE; 3242 if (iov.iov_base == NULL) { 3243 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE); 3244 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE); 3245 } 3246 qemu_iovec_init_external(&qiov, &iov, 1); 3247 3248 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov); 3249 3250 /* Keep bounce buffer around if it is big enough for all 3251 * all future requests. 3252 */ 3253 if (num < max_write_zeroes) { 3254 qemu_vfree(iov.iov_base); 3255 iov.iov_base = NULL; 3256 } 3257 } 3258 3259 sector_num += num; 3260 nb_sectors -= num; 3261 } 3262 3263 qemu_vfree(iov.iov_base); 3264 return ret; 3265 } 3266 3267 /* 3268 * Forwards an already correctly aligned write request to the BlockDriver. 3269 */ 3270 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs, 3271 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, 3272 QEMUIOVector *qiov, int flags) 3273 { 3274 BlockDriver *drv = bs->drv; 3275 bool waited; 3276 int ret; 3277 3278 int64_t sector_num = offset >> BDRV_SECTOR_BITS; 3279 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; 3280 3281 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); 3282 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); 3283 assert(!qiov || bytes == qiov->size); 3284 3285 waited = wait_serialising_requests(req); 3286 assert(!waited || !req->serialising); 3287 assert(req->overlap_offset <= offset); 3288 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes); 3289 3290 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req); 3291 3292 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF && 3293 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes && 3294 qemu_iovec_is_zero(qiov)) { 3295 flags |= BDRV_REQ_ZERO_WRITE; 3296 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) { 3297 flags |= BDRV_REQ_MAY_UNMAP; 3298 } 3299 } 3300 3301 if (ret < 0) { 3302 /* Do nothing, write notifier decided to fail this request */ 3303 } else if (flags & BDRV_REQ_ZERO_WRITE) { 3304 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO); 3305 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags); 3306 } else { 3307 BLKDBG_EVENT(bs, BLKDBG_PWRITEV); 3308 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov); 3309 } 3310 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE); 3311 3312 if (ret == 0 && !bs->enable_write_cache) { 3313 ret = bdrv_co_flush(bs); 3314 } 3315 3316 bdrv_set_dirty(bs, sector_num, nb_sectors); 3317 3318 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) { 3319 bs->wr_highest_sector = sector_num + nb_sectors - 1; 3320 } 3321 if (bs->growable && ret >= 0) { 3322 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors); 3323 } 3324 3325 return ret; 3326 } 3327 3328 /* 3329 * Handle a write request in coroutine context 3330 */ 3331 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, 3332 int64_t offset, unsigned int bytes, QEMUIOVector *qiov, 3333 BdrvRequestFlags flags) 3334 { 3335 BdrvTrackedRequest req; 3336 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ 3337 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); 3338 uint8_t *head_buf = NULL; 3339 uint8_t *tail_buf = NULL; 3340 QEMUIOVector local_qiov; 3341 bool use_local_qiov = false; 3342 int ret; 3343 3344 if (!bs->drv) { 3345 return -ENOMEDIUM; 3346 } 3347 if (bs->read_only) { 3348 return -EACCES; 3349 } 3350 if (bdrv_check_byte_request(bs, offset, bytes)) { 3351 return -EIO; 3352 } 3353 3354 /* throttling disk I/O */ 3355 if (bs->io_limits_enabled) { 3356 bdrv_io_limits_intercept(bs, bytes, true); 3357 } 3358 3359 /* 3360 * Align write if necessary by performing a read-modify-write cycle. 3361 * Pad qiov with the read parts and be sure to have a tracked request not 3362 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle. 3363 */ 3364 tracked_request_begin(&req, bs, offset, bytes, true); 3365 3366 if (offset & (align - 1)) { 3367 QEMUIOVector head_qiov; 3368 struct iovec head_iov; 3369 3370 mark_request_serialising(&req, align); 3371 wait_serialising_requests(&req); 3372 3373 head_buf = qemu_blockalign(bs, align); 3374 head_iov = (struct iovec) { 3375 .iov_base = head_buf, 3376 .iov_len = align, 3377 }; 3378 qemu_iovec_init_external(&head_qiov, &head_iov, 1); 3379 3380 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD); 3381 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align, 3382 align, &head_qiov, 0); 3383 if (ret < 0) { 3384 goto fail; 3385 } 3386 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD); 3387 3388 qemu_iovec_init(&local_qiov, qiov->niov + 2); 3389 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); 3390 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3391 use_local_qiov = true; 3392 3393 bytes += offset & (align - 1); 3394 offset = offset & ~(align - 1); 3395 } 3396 3397 if ((offset + bytes) & (align - 1)) { 3398 QEMUIOVector tail_qiov; 3399 struct iovec tail_iov; 3400 size_t tail_bytes; 3401 bool waited; 3402 3403 mark_request_serialising(&req, align); 3404 waited = wait_serialising_requests(&req); 3405 assert(!waited || !use_local_qiov); 3406 3407 tail_buf = qemu_blockalign(bs, align); 3408 tail_iov = (struct iovec) { 3409 .iov_base = tail_buf, 3410 .iov_len = align, 3411 }; 3412 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1); 3413 3414 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL); 3415 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align, 3416 align, &tail_qiov, 0); 3417 if (ret < 0) { 3418 goto fail; 3419 } 3420 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL); 3421 3422 if (!use_local_qiov) { 3423 qemu_iovec_init(&local_qiov, qiov->niov + 1); 3424 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); 3425 use_local_qiov = true; 3426 } 3427 3428 tail_bytes = (offset + bytes) & (align - 1); 3429 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes); 3430 3431 bytes = ROUND_UP(bytes, align); 3432 } 3433 3434 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, 3435 use_local_qiov ? &local_qiov : qiov, 3436 flags); 3437 3438 fail: 3439 tracked_request_end(&req); 3440 3441 if (use_local_qiov) { 3442 qemu_iovec_destroy(&local_qiov); 3443 } 3444 qemu_vfree(head_buf); 3445 qemu_vfree(tail_buf); 3446 3447 return ret; 3448 } 3449 3450 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs, 3451 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, 3452 BdrvRequestFlags flags) 3453 { 3454 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) { 3455 return -EINVAL; 3456 } 3457 3458 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS, 3459 nb_sectors << BDRV_SECTOR_BITS, qiov, flags); 3460 } 3461 3462 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num, 3463 int nb_sectors, QEMUIOVector *qiov) 3464 { 3465 trace_bdrv_co_writev(bs, sector_num, nb_sectors); 3466 3467 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0); 3468 } 3469 3470 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs, 3471 int64_t sector_num, int nb_sectors, 3472 BdrvRequestFlags flags) 3473 { 3474 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags); 3475 3476 if (!(bs->open_flags & BDRV_O_UNMAP)) { 3477 flags &= ~BDRV_REQ_MAY_UNMAP; 3478 } 3479 3480 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL, 3481 BDRV_REQ_ZERO_WRITE | flags); 3482 } 3483 3484 /** 3485 * Truncate file to 'offset' bytes (needed only for file protocols) 3486 */ 3487 int bdrv_truncate(BlockDriverState *bs, int64_t offset) 3488 { 3489 BlockDriver *drv = bs->drv; 3490 int ret; 3491 if (!drv) 3492 return -ENOMEDIUM; 3493 if (!drv->bdrv_truncate) 3494 return -ENOTSUP; 3495 if (bs->read_only) 3496 return -EACCES; 3497 3498 ret = drv->bdrv_truncate(bs, offset); 3499 if (ret == 0) { 3500 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS); 3501 bdrv_dev_resize_cb(bs); 3502 } 3503 return ret; 3504 } 3505 3506 /** 3507 * Length of a allocated file in bytes. Sparse files are counted by actual 3508 * allocated space. Return < 0 if error or unknown. 3509 */ 3510 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs) 3511 { 3512 BlockDriver *drv = bs->drv; 3513 if (!drv) { 3514 return -ENOMEDIUM; 3515 } 3516 if (drv->bdrv_get_allocated_file_size) { 3517 return drv->bdrv_get_allocated_file_size(bs); 3518 } 3519 if (bs->file) { 3520 return bdrv_get_allocated_file_size(bs->file); 3521 } 3522 return -ENOTSUP; 3523 } 3524 3525 /** 3526 * Length of a file in bytes. Return < 0 if error or unknown. 3527 */ 3528 int64_t bdrv_getlength(BlockDriverState *bs) 3529 { 3530 BlockDriver *drv = bs->drv; 3531 if (!drv) 3532 return -ENOMEDIUM; 3533 3534 if (drv->has_variable_length) { 3535 int ret = refresh_total_sectors(bs, bs->total_sectors); 3536 if (ret < 0) { 3537 return ret; 3538 } 3539 } 3540 return bs->total_sectors * BDRV_SECTOR_SIZE; 3541 } 3542 3543 /* return 0 as number of sectors if no device present or error */ 3544 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr) 3545 { 3546 int64_t length; 3547 length = bdrv_getlength(bs); 3548 if (length < 0) 3549 length = 0; 3550 else 3551 length = length >> BDRV_SECTOR_BITS; 3552 *nb_sectors_ptr = length; 3553 } 3554 3555 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error, 3556 BlockdevOnError on_write_error) 3557 { 3558 bs->on_read_error = on_read_error; 3559 bs->on_write_error = on_write_error; 3560 } 3561 3562 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read) 3563 { 3564 return is_read ? bs->on_read_error : bs->on_write_error; 3565 } 3566 3567 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error) 3568 { 3569 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error; 3570 3571 switch (on_err) { 3572 case BLOCKDEV_ON_ERROR_ENOSPC: 3573 return (error == ENOSPC) ? 3574 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT; 3575 case BLOCKDEV_ON_ERROR_STOP: 3576 return BLOCK_ERROR_ACTION_STOP; 3577 case BLOCKDEV_ON_ERROR_REPORT: 3578 return BLOCK_ERROR_ACTION_REPORT; 3579 case BLOCKDEV_ON_ERROR_IGNORE: 3580 return BLOCK_ERROR_ACTION_IGNORE; 3581 default: 3582 abort(); 3583 } 3584 } 3585 3586 /* This is done by device models because, while the block layer knows 3587 * about the error, it does not know whether an operation comes from 3588 * the device or the block layer (from a job, for example). 3589 */ 3590 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action, 3591 bool is_read, int error) 3592 { 3593 assert(error >= 0); 3594 3595 if (action == BLOCK_ERROR_ACTION_STOP) { 3596 /* First set the iostatus, so that "info block" returns an iostatus 3597 * that matches the events raised so far (an additional error iostatus 3598 * is fine, but not a lost one). 3599 */ 3600 bdrv_iostatus_set_err(bs, error); 3601 3602 /* Then raise the request to stop the VM and the event. 3603 * qemu_system_vmstop_request_prepare has two effects. First, 3604 * it ensures that the STOP event always comes after the 3605 * BLOCK_IO_ERROR event. Second, it ensures that even if management 3606 * can observe the STOP event and do a "cont" before the STOP 3607 * event is issued, the VM will not stop. In this case, vm_start() 3608 * also ensures that the STOP/RESUME pair of events is emitted. 3609 */ 3610 qemu_system_vmstop_request_prepare(); 3611 qapi_event_send_block_io_error(bdrv_get_device_name(bs), 3612 is_read ? IO_OPERATION_TYPE_READ : 3613 IO_OPERATION_TYPE_WRITE, 3614 action, &error_abort); 3615 qemu_system_vmstop_request(RUN_STATE_IO_ERROR); 3616 } else { 3617 qapi_event_send_block_io_error(bdrv_get_device_name(bs), 3618 is_read ? IO_OPERATION_TYPE_READ : 3619 IO_OPERATION_TYPE_WRITE, 3620 action, &error_abort); 3621 } 3622 } 3623 3624 int bdrv_is_read_only(BlockDriverState *bs) 3625 { 3626 return bs->read_only; 3627 } 3628 3629 int bdrv_is_sg(BlockDriverState *bs) 3630 { 3631 return bs->sg; 3632 } 3633 3634 int bdrv_enable_write_cache(BlockDriverState *bs) 3635 { 3636 return bs->enable_write_cache; 3637 } 3638 3639 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce) 3640 { 3641 bs->enable_write_cache = wce; 3642 3643 /* so a reopen() will preserve wce */ 3644 if (wce) { 3645 bs->open_flags |= BDRV_O_CACHE_WB; 3646 } else { 3647 bs->open_flags &= ~BDRV_O_CACHE_WB; 3648 } 3649 } 3650 3651 int bdrv_is_encrypted(BlockDriverState *bs) 3652 { 3653 if (bs->backing_hd && bs->backing_hd->encrypted) 3654 return 1; 3655 return bs->encrypted; 3656 } 3657 3658 int bdrv_key_required(BlockDriverState *bs) 3659 { 3660 BlockDriverState *backing_hd = bs->backing_hd; 3661 3662 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key) 3663 return 1; 3664 return (bs->encrypted && !bs->valid_key); 3665 } 3666 3667 int bdrv_set_key(BlockDriverState *bs, const char *key) 3668 { 3669 int ret; 3670 if (bs->backing_hd && bs->backing_hd->encrypted) { 3671 ret = bdrv_set_key(bs->backing_hd, key); 3672 if (ret < 0) 3673 return ret; 3674 if (!bs->encrypted) 3675 return 0; 3676 } 3677 if (!bs->encrypted) { 3678 return -EINVAL; 3679 } else if (!bs->drv || !bs->drv->bdrv_set_key) { 3680 return -ENOMEDIUM; 3681 } 3682 ret = bs->drv->bdrv_set_key(bs, key); 3683 if (ret < 0) { 3684 bs->valid_key = 0; 3685 } else if (!bs->valid_key) { 3686 bs->valid_key = 1; 3687 /* call the change callback now, we skipped it on open */ 3688 bdrv_dev_change_media_cb(bs, true); 3689 } 3690 return ret; 3691 } 3692 3693 const char *bdrv_get_format_name(BlockDriverState *bs) 3694 { 3695 return bs->drv ? bs->drv->format_name : NULL; 3696 } 3697 3698 void bdrv_iterate_format(void (*it)(void *opaque, const char *name), 3699 void *opaque) 3700 { 3701 BlockDriver *drv; 3702 int count = 0; 3703 const char **formats = NULL; 3704 3705 QLIST_FOREACH(drv, &bdrv_drivers, list) { 3706 if (drv->format_name) { 3707 bool found = false; 3708 int i = count; 3709 while (formats && i && !found) { 3710 found = !strcmp(formats[--i], drv->format_name); 3711 } 3712 3713 if (!found) { 3714 formats = g_realloc(formats, (count + 1) * sizeof(char *)); 3715 formats[count++] = drv->format_name; 3716 it(opaque, drv->format_name); 3717 } 3718 } 3719 } 3720 g_free(formats); 3721 } 3722 3723 /* This function is to find block backend bs */ 3724 BlockDriverState *bdrv_find(const char *name) 3725 { 3726 BlockDriverState *bs; 3727 3728 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3729 if (!strcmp(name, bs->device_name)) { 3730 return bs; 3731 } 3732 } 3733 return NULL; 3734 } 3735 3736 /* This function is to find a node in the bs graph */ 3737 BlockDriverState *bdrv_find_node(const char *node_name) 3738 { 3739 BlockDriverState *bs; 3740 3741 assert(node_name); 3742 3743 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) { 3744 if (!strcmp(node_name, bs->node_name)) { 3745 return bs; 3746 } 3747 } 3748 return NULL; 3749 } 3750 3751 /* Put this QMP function here so it can access the static graph_bdrv_states. */ 3752 BlockDeviceInfoList *bdrv_named_nodes_list(void) 3753 { 3754 BlockDeviceInfoList *list, *entry; 3755 BlockDriverState *bs; 3756 3757 list = NULL; 3758 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) { 3759 entry = g_malloc0(sizeof(*entry)); 3760 entry->value = bdrv_block_device_info(bs); 3761 entry->next = list; 3762 list = entry; 3763 } 3764 3765 return list; 3766 } 3767 3768 BlockDriverState *bdrv_lookup_bs(const char *device, 3769 const char *node_name, 3770 Error **errp) 3771 { 3772 BlockDriverState *bs = NULL; 3773 3774 if (device) { 3775 bs = bdrv_find(device); 3776 3777 if (bs) { 3778 return bs; 3779 } 3780 } 3781 3782 if (node_name) { 3783 bs = bdrv_find_node(node_name); 3784 3785 if (bs) { 3786 return bs; 3787 } 3788 } 3789 3790 error_setg(errp, "Cannot find device=%s nor node_name=%s", 3791 device ? device : "", 3792 node_name ? node_name : ""); 3793 return NULL; 3794 } 3795 3796 /* If 'base' is in the same chain as 'top', return true. Otherwise, 3797 * return false. If either argument is NULL, return false. */ 3798 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base) 3799 { 3800 while (top && top != base) { 3801 top = top->backing_hd; 3802 } 3803 3804 return top != NULL; 3805 } 3806 3807 BlockDriverState *bdrv_next(BlockDriverState *bs) 3808 { 3809 if (!bs) { 3810 return QTAILQ_FIRST(&bdrv_states); 3811 } 3812 return QTAILQ_NEXT(bs, device_list); 3813 } 3814 3815 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque) 3816 { 3817 BlockDriverState *bs; 3818 3819 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3820 it(opaque, bs); 3821 } 3822 } 3823 3824 const char *bdrv_get_device_name(BlockDriverState *bs) 3825 { 3826 return bs->device_name; 3827 } 3828 3829 int bdrv_get_flags(BlockDriverState *bs) 3830 { 3831 return bs->open_flags; 3832 } 3833 3834 int bdrv_flush_all(void) 3835 { 3836 BlockDriverState *bs; 3837 int result = 0; 3838 3839 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 3840 AioContext *aio_context = bdrv_get_aio_context(bs); 3841 int ret; 3842 3843 aio_context_acquire(aio_context); 3844 ret = bdrv_flush(bs); 3845 if (ret < 0 && !result) { 3846 result = ret; 3847 } 3848 aio_context_release(aio_context); 3849 } 3850 3851 return result; 3852 } 3853 3854 int bdrv_has_zero_init_1(BlockDriverState *bs) 3855 { 3856 return 1; 3857 } 3858 3859 int bdrv_has_zero_init(BlockDriverState *bs) 3860 { 3861 assert(bs->drv); 3862 3863 /* If BS is a copy on write image, it is initialized to 3864 the contents of the base image, which may not be zeroes. */ 3865 if (bs->backing_hd) { 3866 return 0; 3867 } 3868 if (bs->drv->bdrv_has_zero_init) { 3869 return bs->drv->bdrv_has_zero_init(bs); 3870 } 3871 3872 /* safe default */ 3873 return 0; 3874 } 3875 3876 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs) 3877 { 3878 BlockDriverInfo bdi; 3879 3880 if (bs->backing_hd) { 3881 return false; 3882 } 3883 3884 if (bdrv_get_info(bs, &bdi) == 0) { 3885 return bdi.unallocated_blocks_are_zero; 3886 } 3887 3888 return false; 3889 } 3890 3891 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs) 3892 { 3893 BlockDriverInfo bdi; 3894 3895 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) { 3896 return false; 3897 } 3898 3899 if (bdrv_get_info(bs, &bdi) == 0) { 3900 return bdi.can_write_zeroes_with_unmap; 3901 } 3902 3903 return false; 3904 } 3905 3906 typedef struct BdrvCoGetBlockStatusData { 3907 BlockDriverState *bs; 3908 BlockDriverState *base; 3909 int64_t sector_num; 3910 int nb_sectors; 3911 int *pnum; 3912 int64_t ret; 3913 bool done; 3914 } BdrvCoGetBlockStatusData; 3915 3916 /* 3917 * Returns true iff the specified sector is present in the disk image. Drivers 3918 * not implementing the functionality are assumed to not support backing files, 3919 * hence all their sectors are reported as allocated. 3920 * 3921 * If 'sector_num' is beyond the end of the disk image the return value is 0 3922 * and 'pnum' is set to 0. 3923 * 3924 * 'pnum' is set to the number of sectors (including and immediately following 3925 * the specified sector) that are known to be in the same 3926 * allocated/unallocated state. 3927 * 3928 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes 3929 * beyond the end of the disk image it will be clamped. 3930 */ 3931 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, 3932 int64_t sector_num, 3933 int nb_sectors, int *pnum) 3934 { 3935 int64_t length; 3936 int64_t n; 3937 int64_t ret, ret2; 3938 3939 length = bdrv_getlength(bs); 3940 if (length < 0) { 3941 return length; 3942 } 3943 3944 if (sector_num >= (length >> BDRV_SECTOR_BITS)) { 3945 *pnum = 0; 3946 return 0; 3947 } 3948 3949 n = bs->total_sectors - sector_num; 3950 if (n < nb_sectors) { 3951 nb_sectors = n; 3952 } 3953 3954 if (!bs->drv->bdrv_co_get_block_status) { 3955 *pnum = nb_sectors; 3956 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED; 3957 if (bs->drv->protocol_name) { 3958 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE); 3959 } 3960 return ret; 3961 } 3962 3963 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum); 3964 if (ret < 0) { 3965 *pnum = 0; 3966 return ret; 3967 } 3968 3969 if (ret & BDRV_BLOCK_RAW) { 3970 assert(ret & BDRV_BLOCK_OFFSET_VALID); 3971 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, 3972 *pnum, pnum); 3973 } 3974 3975 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) { 3976 ret |= BDRV_BLOCK_ALLOCATED; 3977 } 3978 3979 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) { 3980 if (bdrv_unallocated_blocks_are_zero(bs)) { 3981 ret |= BDRV_BLOCK_ZERO; 3982 } else if (bs->backing_hd) { 3983 BlockDriverState *bs2 = bs->backing_hd; 3984 int64_t length2 = bdrv_getlength(bs2); 3985 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) { 3986 ret |= BDRV_BLOCK_ZERO; 3987 } 3988 } 3989 } 3990 3991 if (bs->file && 3992 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) && 3993 (ret & BDRV_BLOCK_OFFSET_VALID)) { 3994 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, 3995 *pnum, pnum); 3996 if (ret2 >= 0) { 3997 /* Ignore errors. This is just providing extra information, it 3998 * is useful but not necessary. 3999 */ 4000 ret |= (ret2 & BDRV_BLOCK_ZERO); 4001 } 4002 } 4003 4004 return ret; 4005 } 4006 4007 /* Coroutine wrapper for bdrv_get_block_status() */ 4008 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque) 4009 { 4010 BdrvCoGetBlockStatusData *data = opaque; 4011 BlockDriverState *bs = data->bs; 4012 4013 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors, 4014 data->pnum); 4015 data->done = true; 4016 } 4017 4018 /* 4019 * Synchronous wrapper around bdrv_co_get_block_status(). 4020 * 4021 * See bdrv_co_get_block_status() for details. 4022 */ 4023 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num, 4024 int nb_sectors, int *pnum) 4025 { 4026 Coroutine *co; 4027 BdrvCoGetBlockStatusData data = { 4028 .bs = bs, 4029 .sector_num = sector_num, 4030 .nb_sectors = nb_sectors, 4031 .pnum = pnum, 4032 .done = false, 4033 }; 4034 4035 if (qemu_in_coroutine()) { 4036 /* Fast-path if already in coroutine context */ 4037 bdrv_get_block_status_co_entry(&data); 4038 } else { 4039 AioContext *aio_context = bdrv_get_aio_context(bs); 4040 4041 co = qemu_coroutine_create(bdrv_get_block_status_co_entry); 4042 qemu_coroutine_enter(co, &data); 4043 while (!data.done) { 4044 aio_poll(aio_context, true); 4045 } 4046 } 4047 return data.ret; 4048 } 4049 4050 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, 4051 int nb_sectors, int *pnum) 4052 { 4053 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum); 4054 if (ret < 0) { 4055 return ret; 4056 } 4057 return !!(ret & BDRV_BLOCK_ALLOCATED); 4058 } 4059 4060 /* 4061 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP] 4062 * 4063 * Return true if the given sector is allocated in any image between 4064 * BASE and TOP (inclusive). BASE can be NULL to check if the given 4065 * sector is allocated in any image of the chain. Return false otherwise. 4066 * 4067 * 'pnum' is set to the number of sectors (including and immediately following 4068 * the specified sector) that are known to be in the same 4069 * allocated/unallocated state. 4070 * 4071 */ 4072 int bdrv_is_allocated_above(BlockDriverState *top, 4073 BlockDriverState *base, 4074 int64_t sector_num, 4075 int nb_sectors, int *pnum) 4076 { 4077 BlockDriverState *intermediate; 4078 int ret, n = nb_sectors; 4079 4080 intermediate = top; 4081 while (intermediate && intermediate != base) { 4082 int pnum_inter; 4083 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors, 4084 &pnum_inter); 4085 if (ret < 0) { 4086 return ret; 4087 } else if (ret) { 4088 *pnum = pnum_inter; 4089 return 1; 4090 } 4091 4092 /* 4093 * [sector_num, nb_sectors] is unallocated on top but intermediate 4094 * might have 4095 * 4096 * [sector_num+x, nr_sectors] allocated. 4097 */ 4098 if (n > pnum_inter && 4099 (intermediate == top || 4100 sector_num + pnum_inter < intermediate->total_sectors)) { 4101 n = pnum_inter; 4102 } 4103 4104 intermediate = intermediate->backing_hd; 4105 } 4106 4107 *pnum = n; 4108 return 0; 4109 } 4110 4111 const char *bdrv_get_encrypted_filename(BlockDriverState *bs) 4112 { 4113 if (bs->backing_hd && bs->backing_hd->encrypted) 4114 return bs->backing_file; 4115 else if (bs->encrypted) 4116 return bs->filename; 4117 else 4118 return NULL; 4119 } 4120 4121 void bdrv_get_backing_filename(BlockDriverState *bs, 4122 char *filename, int filename_size) 4123 { 4124 pstrcpy(filename, filename_size, bs->backing_file); 4125 } 4126 4127 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num, 4128 const uint8_t *buf, int nb_sectors) 4129 { 4130 BlockDriver *drv = bs->drv; 4131 if (!drv) 4132 return -ENOMEDIUM; 4133 if (!drv->bdrv_write_compressed) 4134 return -ENOTSUP; 4135 if (bdrv_check_request(bs, sector_num, nb_sectors)) 4136 return -EIO; 4137 4138 assert(QLIST_EMPTY(&bs->dirty_bitmaps)); 4139 4140 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors); 4141 } 4142 4143 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi) 4144 { 4145 BlockDriver *drv = bs->drv; 4146 if (!drv) 4147 return -ENOMEDIUM; 4148 if (!drv->bdrv_get_info) 4149 return -ENOTSUP; 4150 memset(bdi, 0, sizeof(*bdi)); 4151 return drv->bdrv_get_info(bs, bdi); 4152 } 4153 4154 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs) 4155 { 4156 BlockDriver *drv = bs->drv; 4157 if (drv && drv->bdrv_get_specific_info) { 4158 return drv->bdrv_get_specific_info(bs); 4159 } 4160 return NULL; 4161 } 4162 4163 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf, 4164 int64_t pos, int size) 4165 { 4166 QEMUIOVector qiov; 4167 struct iovec iov = { 4168 .iov_base = (void *) buf, 4169 .iov_len = size, 4170 }; 4171 4172 qemu_iovec_init_external(&qiov, &iov, 1); 4173 return bdrv_writev_vmstate(bs, &qiov, pos); 4174 } 4175 4176 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos) 4177 { 4178 BlockDriver *drv = bs->drv; 4179 4180 if (!drv) { 4181 return -ENOMEDIUM; 4182 } else if (drv->bdrv_save_vmstate) { 4183 return drv->bdrv_save_vmstate(bs, qiov, pos); 4184 } else if (bs->file) { 4185 return bdrv_writev_vmstate(bs->file, qiov, pos); 4186 } 4187 4188 return -ENOTSUP; 4189 } 4190 4191 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf, 4192 int64_t pos, int size) 4193 { 4194 BlockDriver *drv = bs->drv; 4195 if (!drv) 4196 return -ENOMEDIUM; 4197 if (drv->bdrv_load_vmstate) 4198 return drv->bdrv_load_vmstate(bs, buf, pos, size); 4199 if (bs->file) 4200 return bdrv_load_vmstate(bs->file, buf, pos, size); 4201 return -ENOTSUP; 4202 } 4203 4204 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event) 4205 { 4206 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) { 4207 return; 4208 } 4209 4210 bs->drv->bdrv_debug_event(bs, event); 4211 } 4212 4213 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event, 4214 const char *tag) 4215 { 4216 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) { 4217 bs = bs->file; 4218 } 4219 4220 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) { 4221 return bs->drv->bdrv_debug_breakpoint(bs, event, tag); 4222 } 4223 4224 return -ENOTSUP; 4225 } 4226 4227 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag) 4228 { 4229 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) { 4230 bs = bs->file; 4231 } 4232 4233 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) { 4234 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag); 4235 } 4236 4237 return -ENOTSUP; 4238 } 4239 4240 int bdrv_debug_resume(BlockDriverState *bs, const char *tag) 4241 { 4242 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) { 4243 bs = bs->file; 4244 } 4245 4246 if (bs && bs->drv && bs->drv->bdrv_debug_resume) { 4247 return bs->drv->bdrv_debug_resume(bs, tag); 4248 } 4249 4250 return -ENOTSUP; 4251 } 4252 4253 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag) 4254 { 4255 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) { 4256 bs = bs->file; 4257 } 4258 4259 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) { 4260 return bs->drv->bdrv_debug_is_suspended(bs, tag); 4261 } 4262 4263 return false; 4264 } 4265 4266 int bdrv_is_snapshot(BlockDriverState *bs) 4267 { 4268 return !!(bs->open_flags & BDRV_O_SNAPSHOT); 4269 } 4270 4271 /* backing_file can either be relative, or absolute, or a protocol. If it is 4272 * relative, it must be relative to the chain. So, passing in bs->filename 4273 * from a BDS as backing_file should not be done, as that may be relative to 4274 * the CWD rather than the chain. */ 4275 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs, 4276 const char *backing_file) 4277 { 4278 char *filename_full = NULL; 4279 char *backing_file_full = NULL; 4280 char *filename_tmp = NULL; 4281 int is_protocol = 0; 4282 BlockDriverState *curr_bs = NULL; 4283 BlockDriverState *retval = NULL; 4284 4285 if (!bs || !bs->drv || !backing_file) { 4286 return NULL; 4287 } 4288 4289 filename_full = g_malloc(PATH_MAX); 4290 backing_file_full = g_malloc(PATH_MAX); 4291 filename_tmp = g_malloc(PATH_MAX); 4292 4293 is_protocol = path_has_protocol(backing_file); 4294 4295 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) { 4296 4297 /* If either of the filename paths is actually a protocol, then 4298 * compare unmodified paths; otherwise make paths relative */ 4299 if (is_protocol || path_has_protocol(curr_bs->backing_file)) { 4300 if (strcmp(backing_file, curr_bs->backing_file) == 0) { 4301 retval = curr_bs->backing_hd; 4302 break; 4303 } 4304 } else { 4305 /* If not an absolute filename path, make it relative to the current 4306 * image's filename path */ 4307 path_combine(filename_tmp, PATH_MAX, curr_bs->filename, 4308 backing_file); 4309 4310 /* We are going to compare absolute pathnames */ 4311 if (!realpath(filename_tmp, filename_full)) { 4312 continue; 4313 } 4314 4315 /* We need to make sure the backing filename we are comparing against 4316 * is relative to the current image filename (or absolute) */ 4317 path_combine(filename_tmp, PATH_MAX, curr_bs->filename, 4318 curr_bs->backing_file); 4319 4320 if (!realpath(filename_tmp, backing_file_full)) { 4321 continue; 4322 } 4323 4324 if (strcmp(backing_file_full, filename_full) == 0) { 4325 retval = curr_bs->backing_hd; 4326 break; 4327 } 4328 } 4329 } 4330 4331 g_free(filename_full); 4332 g_free(backing_file_full); 4333 g_free(filename_tmp); 4334 return retval; 4335 } 4336 4337 int bdrv_get_backing_file_depth(BlockDriverState *bs) 4338 { 4339 if (!bs->drv) { 4340 return 0; 4341 } 4342 4343 if (!bs->backing_hd) { 4344 return 0; 4345 } 4346 4347 return 1 + bdrv_get_backing_file_depth(bs->backing_hd); 4348 } 4349 4350 /**************************************************************/ 4351 /* async I/Os */ 4352 4353 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num, 4354 QEMUIOVector *qiov, int nb_sectors, 4355 BlockDriverCompletionFunc *cb, void *opaque) 4356 { 4357 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque); 4358 4359 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, 4360 cb, opaque, false); 4361 } 4362 4363 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num, 4364 QEMUIOVector *qiov, int nb_sectors, 4365 BlockDriverCompletionFunc *cb, void *opaque) 4366 { 4367 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque); 4368 4369 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, 4370 cb, opaque, true); 4371 } 4372 4373 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs, 4374 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags, 4375 BlockDriverCompletionFunc *cb, void *opaque) 4376 { 4377 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque); 4378 4379 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors, 4380 BDRV_REQ_ZERO_WRITE | flags, 4381 cb, opaque, true); 4382 } 4383 4384 4385 typedef struct MultiwriteCB { 4386 int error; 4387 int num_requests; 4388 int num_callbacks; 4389 struct { 4390 BlockDriverCompletionFunc *cb; 4391 void *opaque; 4392 QEMUIOVector *free_qiov; 4393 } callbacks[]; 4394 } MultiwriteCB; 4395 4396 static void multiwrite_user_cb(MultiwriteCB *mcb) 4397 { 4398 int i; 4399 4400 for (i = 0; i < mcb->num_callbacks; i++) { 4401 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error); 4402 if (mcb->callbacks[i].free_qiov) { 4403 qemu_iovec_destroy(mcb->callbacks[i].free_qiov); 4404 } 4405 g_free(mcb->callbacks[i].free_qiov); 4406 } 4407 } 4408 4409 static void multiwrite_cb(void *opaque, int ret) 4410 { 4411 MultiwriteCB *mcb = opaque; 4412 4413 trace_multiwrite_cb(mcb, ret); 4414 4415 if (ret < 0 && !mcb->error) { 4416 mcb->error = ret; 4417 } 4418 4419 mcb->num_requests--; 4420 if (mcb->num_requests == 0) { 4421 multiwrite_user_cb(mcb); 4422 g_free(mcb); 4423 } 4424 } 4425 4426 static int multiwrite_req_compare(const void *a, const void *b) 4427 { 4428 const BlockRequest *req1 = a, *req2 = b; 4429 4430 /* 4431 * Note that we can't simply subtract req2->sector from req1->sector 4432 * here as that could overflow the return value. 4433 */ 4434 if (req1->sector > req2->sector) { 4435 return 1; 4436 } else if (req1->sector < req2->sector) { 4437 return -1; 4438 } else { 4439 return 0; 4440 } 4441 } 4442 4443 /* 4444 * Takes a bunch of requests and tries to merge them. Returns the number of 4445 * requests that remain after merging. 4446 */ 4447 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs, 4448 int num_reqs, MultiwriteCB *mcb) 4449 { 4450 int i, outidx; 4451 4452 // Sort requests by start sector 4453 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare); 4454 4455 // Check if adjacent requests touch the same clusters. If so, combine them, 4456 // filling up gaps with zero sectors. 4457 outidx = 0; 4458 for (i = 1; i < num_reqs; i++) { 4459 int merge = 0; 4460 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors; 4461 4462 // Handle exactly sequential writes and overlapping writes. 4463 if (reqs[i].sector <= oldreq_last) { 4464 merge = 1; 4465 } 4466 4467 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) { 4468 merge = 0; 4469 } 4470 4471 if (merge) { 4472 size_t size; 4473 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov)); 4474 qemu_iovec_init(qiov, 4475 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1); 4476 4477 // Add the first request to the merged one. If the requests are 4478 // overlapping, drop the last sectors of the first request. 4479 size = (reqs[i].sector - reqs[outidx].sector) << 9; 4480 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size); 4481 4482 // We should need to add any zeros between the two requests 4483 assert (reqs[i].sector <= oldreq_last); 4484 4485 // Add the second request 4486 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size); 4487 4488 reqs[outidx].nb_sectors = qiov->size >> 9; 4489 reqs[outidx].qiov = qiov; 4490 4491 mcb->callbacks[i].free_qiov = reqs[outidx].qiov; 4492 } else { 4493 outidx++; 4494 reqs[outidx].sector = reqs[i].sector; 4495 reqs[outidx].nb_sectors = reqs[i].nb_sectors; 4496 reqs[outidx].qiov = reqs[i].qiov; 4497 } 4498 } 4499 4500 return outidx + 1; 4501 } 4502 4503 /* 4504 * Submit multiple AIO write requests at once. 4505 * 4506 * On success, the function returns 0 and all requests in the reqs array have 4507 * been submitted. In error case this function returns -1, and any of the 4508 * requests may or may not be submitted yet. In particular, this means that the 4509 * callback will be called for some of the requests, for others it won't. The 4510 * caller must check the error field of the BlockRequest to wait for the right 4511 * callbacks (if error != 0, no callback will be called). 4512 * 4513 * The implementation may modify the contents of the reqs array, e.g. to merge 4514 * requests. However, the fields opaque and error are left unmodified as they 4515 * are used to signal failure for a single request to the caller. 4516 */ 4517 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs) 4518 { 4519 MultiwriteCB *mcb; 4520 int i; 4521 4522 /* don't submit writes if we don't have a medium */ 4523 if (bs->drv == NULL) { 4524 for (i = 0; i < num_reqs; i++) { 4525 reqs[i].error = -ENOMEDIUM; 4526 } 4527 return -1; 4528 } 4529 4530 if (num_reqs == 0) { 4531 return 0; 4532 } 4533 4534 // Create MultiwriteCB structure 4535 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks)); 4536 mcb->num_requests = 0; 4537 mcb->num_callbacks = num_reqs; 4538 4539 for (i = 0; i < num_reqs; i++) { 4540 mcb->callbacks[i].cb = reqs[i].cb; 4541 mcb->callbacks[i].opaque = reqs[i].opaque; 4542 } 4543 4544 // Check for mergable requests 4545 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb); 4546 4547 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs); 4548 4549 /* Run the aio requests. */ 4550 mcb->num_requests = num_reqs; 4551 for (i = 0; i < num_reqs; i++) { 4552 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov, 4553 reqs[i].nb_sectors, reqs[i].flags, 4554 multiwrite_cb, mcb, 4555 true); 4556 } 4557 4558 return 0; 4559 } 4560 4561 void bdrv_aio_cancel(BlockDriverAIOCB *acb) 4562 { 4563 acb->aiocb_info->cancel(acb); 4564 } 4565 4566 /**************************************************************/ 4567 /* async block device emulation */ 4568 4569 typedef struct BlockDriverAIOCBSync { 4570 BlockDriverAIOCB common; 4571 QEMUBH *bh; 4572 int ret; 4573 /* vector translation state */ 4574 QEMUIOVector *qiov; 4575 uint8_t *bounce; 4576 int is_write; 4577 } BlockDriverAIOCBSync; 4578 4579 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb) 4580 { 4581 BlockDriverAIOCBSync *acb = 4582 container_of(blockacb, BlockDriverAIOCBSync, common); 4583 qemu_bh_delete(acb->bh); 4584 acb->bh = NULL; 4585 qemu_aio_release(acb); 4586 } 4587 4588 static const AIOCBInfo bdrv_em_aiocb_info = { 4589 .aiocb_size = sizeof(BlockDriverAIOCBSync), 4590 .cancel = bdrv_aio_cancel_em, 4591 }; 4592 4593 static void bdrv_aio_bh_cb(void *opaque) 4594 { 4595 BlockDriverAIOCBSync *acb = opaque; 4596 4597 if (!acb->is_write) 4598 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size); 4599 qemu_vfree(acb->bounce); 4600 acb->common.cb(acb->common.opaque, acb->ret); 4601 qemu_bh_delete(acb->bh); 4602 acb->bh = NULL; 4603 qemu_aio_release(acb); 4604 } 4605 4606 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs, 4607 int64_t sector_num, 4608 QEMUIOVector *qiov, 4609 int nb_sectors, 4610 BlockDriverCompletionFunc *cb, 4611 void *opaque, 4612 int is_write) 4613 4614 { 4615 BlockDriverAIOCBSync *acb; 4616 4617 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque); 4618 acb->is_write = is_write; 4619 acb->qiov = qiov; 4620 acb->bounce = qemu_blockalign(bs, qiov->size); 4621 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb); 4622 4623 if (is_write) { 4624 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size); 4625 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors); 4626 } else { 4627 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors); 4628 } 4629 4630 qemu_bh_schedule(acb->bh); 4631 4632 return &acb->common; 4633 } 4634 4635 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, 4636 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 4637 BlockDriverCompletionFunc *cb, void *opaque) 4638 { 4639 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0); 4640 } 4641 4642 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, 4643 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, 4644 BlockDriverCompletionFunc *cb, void *opaque) 4645 { 4646 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1); 4647 } 4648 4649 4650 typedef struct BlockDriverAIOCBCoroutine { 4651 BlockDriverAIOCB common; 4652 BlockRequest req; 4653 bool is_write; 4654 bool *done; 4655 QEMUBH* bh; 4656 } BlockDriverAIOCBCoroutine; 4657 4658 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb) 4659 { 4660 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs); 4661 BlockDriverAIOCBCoroutine *acb = 4662 container_of(blockacb, BlockDriverAIOCBCoroutine, common); 4663 bool done = false; 4664 4665 acb->done = &done; 4666 while (!done) { 4667 aio_poll(aio_context, true); 4668 } 4669 } 4670 4671 static const AIOCBInfo bdrv_em_co_aiocb_info = { 4672 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine), 4673 .cancel = bdrv_aio_co_cancel_em, 4674 }; 4675 4676 static void bdrv_co_em_bh(void *opaque) 4677 { 4678 BlockDriverAIOCBCoroutine *acb = opaque; 4679 4680 acb->common.cb(acb->common.opaque, acb->req.error); 4681 4682 if (acb->done) { 4683 *acb->done = true; 4684 } 4685 4686 qemu_bh_delete(acb->bh); 4687 qemu_aio_release(acb); 4688 } 4689 4690 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */ 4691 static void coroutine_fn bdrv_co_do_rw(void *opaque) 4692 { 4693 BlockDriverAIOCBCoroutine *acb = opaque; 4694 BlockDriverState *bs = acb->common.bs; 4695 4696 if (!acb->is_write) { 4697 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector, 4698 acb->req.nb_sectors, acb->req.qiov, acb->req.flags); 4699 } else { 4700 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector, 4701 acb->req.nb_sectors, acb->req.qiov, acb->req.flags); 4702 } 4703 4704 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb); 4705 qemu_bh_schedule(acb->bh); 4706 } 4707 4708 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, 4709 int64_t sector_num, 4710 QEMUIOVector *qiov, 4711 int nb_sectors, 4712 BdrvRequestFlags flags, 4713 BlockDriverCompletionFunc *cb, 4714 void *opaque, 4715 bool is_write) 4716 { 4717 Coroutine *co; 4718 BlockDriverAIOCBCoroutine *acb; 4719 4720 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4721 acb->req.sector = sector_num; 4722 acb->req.nb_sectors = nb_sectors; 4723 acb->req.qiov = qiov; 4724 acb->req.flags = flags; 4725 acb->is_write = is_write; 4726 acb->done = NULL; 4727 4728 co = qemu_coroutine_create(bdrv_co_do_rw); 4729 qemu_coroutine_enter(co, acb); 4730 4731 return &acb->common; 4732 } 4733 4734 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque) 4735 { 4736 BlockDriverAIOCBCoroutine *acb = opaque; 4737 BlockDriverState *bs = acb->common.bs; 4738 4739 acb->req.error = bdrv_co_flush(bs); 4740 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb); 4741 qemu_bh_schedule(acb->bh); 4742 } 4743 4744 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs, 4745 BlockDriverCompletionFunc *cb, void *opaque) 4746 { 4747 trace_bdrv_aio_flush(bs, opaque); 4748 4749 Coroutine *co; 4750 BlockDriverAIOCBCoroutine *acb; 4751 4752 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4753 acb->done = NULL; 4754 4755 co = qemu_coroutine_create(bdrv_aio_flush_co_entry); 4756 qemu_coroutine_enter(co, acb); 4757 4758 return &acb->common; 4759 } 4760 4761 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque) 4762 { 4763 BlockDriverAIOCBCoroutine *acb = opaque; 4764 BlockDriverState *bs = acb->common.bs; 4765 4766 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors); 4767 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb); 4768 qemu_bh_schedule(acb->bh); 4769 } 4770 4771 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs, 4772 int64_t sector_num, int nb_sectors, 4773 BlockDriverCompletionFunc *cb, void *opaque) 4774 { 4775 Coroutine *co; 4776 BlockDriverAIOCBCoroutine *acb; 4777 4778 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque); 4779 4780 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); 4781 acb->req.sector = sector_num; 4782 acb->req.nb_sectors = nb_sectors; 4783 acb->done = NULL; 4784 co = qemu_coroutine_create(bdrv_aio_discard_co_entry); 4785 qemu_coroutine_enter(co, acb); 4786 4787 return &acb->common; 4788 } 4789 4790 void bdrv_init(void) 4791 { 4792 module_call_init(MODULE_INIT_BLOCK); 4793 } 4794 4795 void bdrv_init_with_whitelist(void) 4796 { 4797 use_bdrv_whitelist = 1; 4798 bdrv_init(); 4799 } 4800 4801 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs, 4802 BlockDriverCompletionFunc *cb, void *opaque) 4803 { 4804 BlockDriverAIOCB *acb; 4805 4806 acb = g_slice_alloc(aiocb_info->aiocb_size); 4807 acb->aiocb_info = aiocb_info; 4808 acb->bs = bs; 4809 acb->cb = cb; 4810 acb->opaque = opaque; 4811 return acb; 4812 } 4813 4814 void qemu_aio_release(void *p) 4815 { 4816 BlockDriverAIOCB *acb = p; 4817 g_slice_free1(acb->aiocb_info->aiocb_size, acb); 4818 } 4819 4820 /**************************************************************/ 4821 /* Coroutine block device emulation */ 4822 4823 typedef struct CoroutineIOCompletion { 4824 Coroutine *coroutine; 4825 int ret; 4826 } CoroutineIOCompletion; 4827 4828 static void bdrv_co_io_em_complete(void *opaque, int ret) 4829 { 4830 CoroutineIOCompletion *co = opaque; 4831 4832 co->ret = ret; 4833 qemu_coroutine_enter(co->coroutine, NULL); 4834 } 4835 4836 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num, 4837 int nb_sectors, QEMUIOVector *iov, 4838 bool is_write) 4839 { 4840 CoroutineIOCompletion co = { 4841 .coroutine = qemu_coroutine_self(), 4842 }; 4843 BlockDriverAIOCB *acb; 4844 4845 if (is_write) { 4846 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors, 4847 bdrv_co_io_em_complete, &co); 4848 } else { 4849 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors, 4850 bdrv_co_io_em_complete, &co); 4851 } 4852 4853 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb); 4854 if (!acb) { 4855 return -EIO; 4856 } 4857 qemu_coroutine_yield(); 4858 4859 return co.ret; 4860 } 4861 4862 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, 4863 int64_t sector_num, int nb_sectors, 4864 QEMUIOVector *iov) 4865 { 4866 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false); 4867 } 4868 4869 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, 4870 int64_t sector_num, int nb_sectors, 4871 QEMUIOVector *iov) 4872 { 4873 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true); 4874 } 4875 4876 static void coroutine_fn bdrv_flush_co_entry(void *opaque) 4877 { 4878 RwCo *rwco = opaque; 4879 4880 rwco->ret = bdrv_co_flush(rwco->bs); 4881 } 4882 4883 int coroutine_fn bdrv_co_flush(BlockDriverState *bs) 4884 { 4885 int ret; 4886 4887 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) { 4888 return 0; 4889 } 4890 4891 /* Write back cached data to the OS even with cache=unsafe */ 4892 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS); 4893 if (bs->drv->bdrv_co_flush_to_os) { 4894 ret = bs->drv->bdrv_co_flush_to_os(bs); 4895 if (ret < 0) { 4896 return ret; 4897 } 4898 } 4899 4900 /* But don't actually force it to the disk with cache=unsafe */ 4901 if (bs->open_flags & BDRV_O_NO_FLUSH) { 4902 goto flush_parent; 4903 } 4904 4905 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK); 4906 if (bs->drv->bdrv_co_flush_to_disk) { 4907 ret = bs->drv->bdrv_co_flush_to_disk(bs); 4908 } else if (bs->drv->bdrv_aio_flush) { 4909 BlockDriverAIOCB *acb; 4910 CoroutineIOCompletion co = { 4911 .coroutine = qemu_coroutine_self(), 4912 }; 4913 4914 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co); 4915 if (acb == NULL) { 4916 ret = -EIO; 4917 } else { 4918 qemu_coroutine_yield(); 4919 ret = co.ret; 4920 } 4921 } else { 4922 /* 4923 * Some block drivers always operate in either writethrough or unsafe 4924 * mode and don't support bdrv_flush therefore. Usually qemu doesn't 4925 * know how the server works (because the behaviour is hardcoded or 4926 * depends on server-side configuration), so we can't ensure that 4927 * everything is safe on disk. Returning an error doesn't work because 4928 * that would break guests even if the server operates in writethrough 4929 * mode. 4930 * 4931 * Let's hope the user knows what he's doing. 4932 */ 4933 ret = 0; 4934 } 4935 if (ret < 0) { 4936 return ret; 4937 } 4938 4939 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH 4940 * in the case of cache=unsafe, so there are no useless flushes. 4941 */ 4942 flush_parent: 4943 return bdrv_co_flush(bs->file); 4944 } 4945 4946 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp) 4947 { 4948 Error *local_err = NULL; 4949 int ret; 4950 4951 if (!bs->drv) { 4952 return; 4953 } 4954 4955 if (bs->drv->bdrv_invalidate_cache) { 4956 bs->drv->bdrv_invalidate_cache(bs, &local_err); 4957 } else if (bs->file) { 4958 bdrv_invalidate_cache(bs->file, &local_err); 4959 } 4960 if (local_err) { 4961 error_propagate(errp, local_err); 4962 return; 4963 } 4964 4965 ret = refresh_total_sectors(bs, bs->total_sectors); 4966 if (ret < 0) { 4967 error_setg_errno(errp, -ret, "Could not refresh total sector count"); 4968 return; 4969 } 4970 } 4971 4972 void bdrv_invalidate_cache_all(Error **errp) 4973 { 4974 BlockDriverState *bs; 4975 Error *local_err = NULL; 4976 4977 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 4978 AioContext *aio_context = bdrv_get_aio_context(bs); 4979 4980 aio_context_acquire(aio_context); 4981 bdrv_invalidate_cache(bs, &local_err); 4982 aio_context_release(aio_context); 4983 if (local_err) { 4984 error_propagate(errp, local_err); 4985 return; 4986 } 4987 } 4988 } 4989 4990 void bdrv_clear_incoming_migration_all(void) 4991 { 4992 BlockDriverState *bs; 4993 4994 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 4995 AioContext *aio_context = bdrv_get_aio_context(bs); 4996 4997 aio_context_acquire(aio_context); 4998 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING); 4999 aio_context_release(aio_context); 5000 } 5001 } 5002 5003 int bdrv_flush(BlockDriverState *bs) 5004 { 5005 Coroutine *co; 5006 RwCo rwco = { 5007 .bs = bs, 5008 .ret = NOT_DONE, 5009 }; 5010 5011 if (qemu_in_coroutine()) { 5012 /* Fast-path if already in coroutine context */ 5013 bdrv_flush_co_entry(&rwco); 5014 } else { 5015 AioContext *aio_context = bdrv_get_aio_context(bs); 5016 5017 co = qemu_coroutine_create(bdrv_flush_co_entry); 5018 qemu_coroutine_enter(co, &rwco); 5019 while (rwco.ret == NOT_DONE) { 5020 aio_poll(aio_context, true); 5021 } 5022 } 5023 5024 return rwco.ret; 5025 } 5026 5027 typedef struct DiscardCo { 5028 BlockDriverState *bs; 5029 int64_t sector_num; 5030 int nb_sectors; 5031 int ret; 5032 } DiscardCo; 5033 static void coroutine_fn bdrv_discard_co_entry(void *opaque) 5034 { 5035 DiscardCo *rwco = opaque; 5036 5037 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors); 5038 } 5039 5040 /* if no limit is specified in the BlockLimits use a default 5041 * of 32768 512-byte sectors (16 MiB) per request. 5042 */ 5043 #define MAX_DISCARD_DEFAULT 32768 5044 5045 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num, 5046 int nb_sectors) 5047 { 5048 int max_discard; 5049 5050 if (!bs->drv) { 5051 return -ENOMEDIUM; 5052 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) { 5053 return -EIO; 5054 } else if (bs->read_only) { 5055 return -EROFS; 5056 } 5057 5058 bdrv_reset_dirty(bs, sector_num, nb_sectors); 5059 5060 /* Do nothing if disabled. */ 5061 if (!(bs->open_flags & BDRV_O_UNMAP)) { 5062 return 0; 5063 } 5064 5065 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) { 5066 return 0; 5067 } 5068 5069 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT; 5070 while (nb_sectors > 0) { 5071 int ret; 5072 int num = nb_sectors; 5073 5074 /* align request */ 5075 if (bs->bl.discard_alignment && 5076 num >= bs->bl.discard_alignment && 5077 sector_num % bs->bl.discard_alignment) { 5078 if (num > bs->bl.discard_alignment) { 5079 num = bs->bl.discard_alignment; 5080 } 5081 num -= sector_num % bs->bl.discard_alignment; 5082 } 5083 5084 /* limit request size */ 5085 if (num > max_discard) { 5086 num = max_discard; 5087 } 5088 5089 if (bs->drv->bdrv_co_discard) { 5090 ret = bs->drv->bdrv_co_discard(bs, sector_num, num); 5091 } else { 5092 BlockDriverAIOCB *acb; 5093 CoroutineIOCompletion co = { 5094 .coroutine = qemu_coroutine_self(), 5095 }; 5096 5097 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors, 5098 bdrv_co_io_em_complete, &co); 5099 if (acb == NULL) { 5100 return -EIO; 5101 } else { 5102 qemu_coroutine_yield(); 5103 ret = co.ret; 5104 } 5105 } 5106 if (ret && ret != -ENOTSUP) { 5107 return ret; 5108 } 5109 5110 sector_num += num; 5111 nb_sectors -= num; 5112 } 5113 return 0; 5114 } 5115 5116 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors) 5117 { 5118 Coroutine *co; 5119 DiscardCo rwco = { 5120 .bs = bs, 5121 .sector_num = sector_num, 5122 .nb_sectors = nb_sectors, 5123 .ret = NOT_DONE, 5124 }; 5125 5126 if (qemu_in_coroutine()) { 5127 /* Fast-path if already in coroutine context */ 5128 bdrv_discard_co_entry(&rwco); 5129 } else { 5130 AioContext *aio_context = bdrv_get_aio_context(bs); 5131 5132 co = qemu_coroutine_create(bdrv_discard_co_entry); 5133 qemu_coroutine_enter(co, &rwco); 5134 while (rwco.ret == NOT_DONE) { 5135 aio_poll(aio_context, true); 5136 } 5137 } 5138 5139 return rwco.ret; 5140 } 5141 5142 /**************************************************************/ 5143 /* removable device support */ 5144 5145 /** 5146 * Return TRUE if the media is present 5147 */ 5148 int bdrv_is_inserted(BlockDriverState *bs) 5149 { 5150 BlockDriver *drv = bs->drv; 5151 5152 if (!drv) 5153 return 0; 5154 if (!drv->bdrv_is_inserted) 5155 return 1; 5156 return drv->bdrv_is_inserted(bs); 5157 } 5158 5159 /** 5160 * Return whether the media changed since the last call to this 5161 * function, or -ENOTSUP if we don't know. Most drivers don't know. 5162 */ 5163 int bdrv_media_changed(BlockDriverState *bs) 5164 { 5165 BlockDriver *drv = bs->drv; 5166 5167 if (drv && drv->bdrv_media_changed) { 5168 return drv->bdrv_media_changed(bs); 5169 } 5170 return -ENOTSUP; 5171 } 5172 5173 /** 5174 * If eject_flag is TRUE, eject the media. Otherwise, close the tray 5175 */ 5176 void bdrv_eject(BlockDriverState *bs, bool eject_flag) 5177 { 5178 BlockDriver *drv = bs->drv; 5179 5180 if (drv && drv->bdrv_eject) { 5181 drv->bdrv_eject(bs, eject_flag); 5182 } 5183 5184 if (bs->device_name[0] != '\0') { 5185 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs), 5186 eject_flag, &error_abort); 5187 } 5188 } 5189 5190 /** 5191 * Lock or unlock the media (if it is locked, the user won't be able 5192 * to eject it manually). 5193 */ 5194 void bdrv_lock_medium(BlockDriverState *bs, bool locked) 5195 { 5196 BlockDriver *drv = bs->drv; 5197 5198 trace_bdrv_lock_medium(bs, locked); 5199 5200 if (drv && drv->bdrv_lock_medium) { 5201 drv->bdrv_lock_medium(bs, locked); 5202 } 5203 } 5204 5205 /* needed for generic scsi interface */ 5206 5207 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) 5208 { 5209 BlockDriver *drv = bs->drv; 5210 5211 if (drv && drv->bdrv_ioctl) 5212 return drv->bdrv_ioctl(bs, req, buf); 5213 return -ENOTSUP; 5214 } 5215 5216 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs, 5217 unsigned long int req, void *buf, 5218 BlockDriverCompletionFunc *cb, void *opaque) 5219 { 5220 BlockDriver *drv = bs->drv; 5221 5222 if (drv && drv->bdrv_aio_ioctl) 5223 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque); 5224 return NULL; 5225 } 5226 5227 void bdrv_set_guest_block_size(BlockDriverState *bs, int align) 5228 { 5229 bs->guest_block_size = align; 5230 } 5231 5232 void *qemu_blockalign(BlockDriverState *bs, size_t size) 5233 { 5234 return qemu_memalign(bdrv_opt_mem_align(bs), size); 5235 } 5236 5237 /* 5238 * Check if all memory in this vector is sector aligned. 5239 */ 5240 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov) 5241 { 5242 int i; 5243 size_t alignment = bdrv_opt_mem_align(bs); 5244 5245 for (i = 0; i < qiov->niov; i++) { 5246 if ((uintptr_t) qiov->iov[i].iov_base % alignment) { 5247 return false; 5248 } 5249 if (qiov->iov[i].iov_len % alignment) { 5250 return false; 5251 } 5252 } 5253 5254 return true; 5255 } 5256 5257 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity, 5258 Error **errp) 5259 { 5260 int64_t bitmap_size; 5261 BdrvDirtyBitmap *bitmap; 5262 5263 assert((granularity & (granularity - 1)) == 0); 5264 5265 granularity >>= BDRV_SECTOR_BITS; 5266 assert(granularity); 5267 bitmap_size = bdrv_getlength(bs); 5268 if (bitmap_size < 0) { 5269 error_setg_errno(errp, -bitmap_size, "could not get length of device"); 5270 errno = -bitmap_size; 5271 return NULL; 5272 } 5273 bitmap_size >>= BDRV_SECTOR_BITS; 5274 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap)); 5275 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1); 5276 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list); 5277 return bitmap; 5278 } 5279 5280 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) 5281 { 5282 BdrvDirtyBitmap *bm, *next; 5283 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) { 5284 if (bm == bitmap) { 5285 QLIST_REMOVE(bitmap, list); 5286 hbitmap_free(bitmap->bitmap); 5287 g_free(bitmap); 5288 return; 5289 } 5290 } 5291 } 5292 5293 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs) 5294 { 5295 BdrvDirtyBitmap *bm; 5296 BlockDirtyInfoList *list = NULL; 5297 BlockDirtyInfoList **plist = &list; 5298 5299 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) { 5300 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo)); 5301 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList)); 5302 info->count = bdrv_get_dirty_count(bs, bm); 5303 info->granularity = 5304 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap)); 5305 entry->value = info; 5306 *plist = entry; 5307 plist = &entry->next; 5308 } 5309 5310 return list; 5311 } 5312 5313 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector) 5314 { 5315 if (bitmap) { 5316 return hbitmap_get(bitmap->bitmap, sector); 5317 } else { 5318 return 0; 5319 } 5320 } 5321 5322 void bdrv_dirty_iter_init(BlockDriverState *bs, 5323 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi) 5324 { 5325 hbitmap_iter_init(hbi, bitmap->bitmap, 0); 5326 } 5327 5328 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector, 5329 int nr_sectors) 5330 { 5331 BdrvDirtyBitmap *bitmap; 5332 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { 5333 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors); 5334 } 5335 } 5336 5337 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors) 5338 { 5339 BdrvDirtyBitmap *bitmap; 5340 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) { 5341 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors); 5342 } 5343 } 5344 5345 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap) 5346 { 5347 return hbitmap_count(bitmap->bitmap); 5348 } 5349 5350 /* Get a reference to bs */ 5351 void bdrv_ref(BlockDriverState *bs) 5352 { 5353 bs->refcnt++; 5354 } 5355 5356 /* Release a previously grabbed reference to bs. 5357 * If after releasing, reference count is zero, the BlockDriverState is 5358 * deleted. */ 5359 void bdrv_unref(BlockDriverState *bs) 5360 { 5361 assert(bs->refcnt > 0); 5362 if (--bs->refcnt == 0) { 5363 bdrv_delete(bs); 5364 } 5365 } 5366 5367 struct BdrvOpBlocker { 5368 Error *reason; 5369 QLIST_ENTRY(BdrvOpBlocker) list; 5370 }; 5371 5372 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp) 5373 { 5374 BdrvOpBlocker *blocker; 5375 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX); 5376 if (!QLIST_EMPTY(&bs->op_blockers[op])) { 5377 blocker = QLIST_FIRST(&bs->op_blockers[op]); 5378 if (errp) { 5379 error_setg(errp, "Device '%s' is busy: %s", 5380 bs->device_name, error_get_pretty(blocker->reason)); 5381 } 5382 return true; 5383 } 5384 return false; 5385 } 5386 5387 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason) 5388 { 5389 BdrvOpBlocker *blocker; 5390 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX); 5391 5392 blocker = g_malloc0(sizeof(BdrvOpBlocker)); 5393 blocker->reason = reason; 5394 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list); 5395 } 5396 5397 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason) 5398 { 5399 BdrvOpBlocker *blocker, *next; 5400 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX); 5401 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) { 5402 if (blocker->reason == reason) { 5403 QLIST_REMOVE(blocker, list); 5404 g_free(blocker); 5405 } 5406 } 5407 } 5408 5409 void bdrv_op_block_all(BlockDriverState *bs, Error *reason) 5410 { 5411 int i; 5412 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) { 5413 bdrv_op_block(bs, i, reason); 5414 } 5415 } 5416 5417 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason) 5418 { 5419 int i; 5420 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) { 5421 bdrv_op_unblock(bs, i, reason); 5422 } 5423 } 5424 5425 bool bdrv_op_blocker_is_empty(BlockDriverState *bs) 5426 { 5427 int i; 5428 5429 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) { 5430 if (!QLIST_EMPTY(&bs->op_blockers[i])) { 5431 return false; 5432 } 5433 } 5434 return true; 5435 } 5436 5437 void bdrv_iostatus_enable(BlockDriverState *bs) 5438 { 5439 bs->iostatus_enabled = true; 5440 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK; 5441 } 5442 5443 /* The I/O status is only enabled if the drive explicitly 5444 * enables it _and_ the VM is configured to stop on errors */ 5445 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs) 5446 { 5447 return (bs->iostatus_enabled && 5448 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC || 5449 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP || 5450 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP)); 5451 } 5452 5453 void bdrv_iostatus_disable(BlockDriverState *bs) 5454 { 5455 bs->iostatus_enabled = false; 5456 } 5457 5458 void bdrv_iostatus_reset(BlockDriverState *bs) 5459 { 5460 if (bdrv_iostatus_is_enabled(bs)) { 5461 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK; 5462 if (bs->job) { 5463 block_job_iostatus_reset(bs->job); 5464 } 5465 } 5466 } 5467 5468 void bdrv_iostatus_set_err(BlockDriverState *bs, int error) 5469 { 5470 assert(bdrv_iostatus_is_enabled(bs)); 5471 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) { 5472 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE : 5473 BLOCK_DEVICE_IO_STATUS_FAILED; 5474 } 5475 } 5476 5477 void 5478 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes, 5479 enum BlockAcctType type) 5480 { 5481 assert(type < BDRV_MAX_IOTYPE); 5482 5483 cookie->bytes = bytes; 5484 cookie->start_time_ns = get_clock(); 5485 cookie->type = type; 5486 } 5487 5488 void 5489 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie) 5490 { 5491 assert(cookie->type < BDRV_MAX_IOTYPE); 5492 5493 bs->nr_bytes[cookie->type] += cookie->bytes; 5494 bs->nr_ops[cookie->type]++; 5495 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns; 5496 } 5497 5498 void bdrv_img_create(const char *filename, const char *fmt, 5499 const char *base_filename, const char *base_fmt, 5500 char *options, uint64_t img_size, int flags, 5501 Error **errp, bool quiet) 5502 { 5503 QemuOptsList *create_opts = NULL; 5504 QemuOpts *opts = NULL; 5505 const char *backing_fmt, *backing_file; 5506 int64_t size; 5507 BlockDriver *drv, *proto_drv; 5508 BlockDriver *backing_drv = NULL; 5509 Error *local_err = NULL; 5510 int ret = 0; 5511 5512 /* Find driver and parse its options */ 5513 drv = bdrv_find_format(fmt); 5514 if (!drv) { 5515 error_setg(errp, "Unknown file format '%s'", fmt); 5516 return; 5517 } 5518 5519 proto_drv = bdrv_find_protocol(filename, true); 5520 if (!proto_drv) { 5521 error_setg(errp, "Unknown protocol '%s'", filename); 5522 return; 5523 } 5524 5525 create_opts = qemu_opts_append(create_opts, drv->create_opts); 5526 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts); 5527 5528 /* Create parameter list with default values */ 5529 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort); 5530 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size); 5531 5532 /* Parse -o options */ 5533 if (options) { 5534 if (qemu_opts_do_parse(opts, options, NULL) != 0) { 5535 error_setg(errp, "Invalid options for file format '%s'", fmt); 5536 goto out; 5537 } 5538 } 5539 5540 if (base_filename) { 5541 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) { 5542 error_setg(errp, "Backing file not supported for file format '%s'", 5543 fmt); 5544 goto out; 5545 } 5546 } 5547 5548 if (base_fmt) { 5549 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) { 5550 error_setg(errp, "Backing file format not supported for file " 5551 "format '%s'", fmt); 5552 goto out; 5553 } 5554 } 5555 5556 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE); 5557 if (backing_file) { 5558 if (!strcmp(filename, backing_file)) { 5559 error_setg(errp, "Error: Trying to create an image with the " 5560 "same filename as the backing file"); 5561 goto out; 5562 } 5563 } 5564 5565 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT); 5566 if (backing_fmt) { 5567 backing_drv = bdrv_find_format(backing_fmt); 5568 if (!backing_drv) { 5569 error_setg(errp, "Unknown backing file format '%s'", 5570 backing_fmt); 5571 goto out; 5572 } 5573 } 5574 5575 // The size for the image must always be specified, with one exception: 5576 // If we are using a backing file, we can obtain the size from there 5577 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0); 5578 if (size == -1) { 5579 if (backing_file) { 5580 BlockDriverState *bs; 5581 uint64_t size; 5582 int back_flags; 5583 5584 /* backing files always opened read-only */ 5585 back_flags = 5586 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING); 5587 5588 bs = NULL; 5589 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags, 5590 backing_drv, &local_err); 5591 if (ret < 0) { 5592 error_setg_errno(errp, -ret, "Could not open '%s': %s", 5593 backing_file, 5594 error_get_pretty(local_err)); 5595 error_free(local_err); 5596 local_err = NULL; 5597 goto out; 5598 } 5599 bdrv_get_geometry(bs, &size); 5600 size *= 512; 5601 5602 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size); 5603 5604 bdrv_unref(bs); 5605 } else { 5606 error_setg(errp, "Image creation needs a size parameter"); 5607 goto out; 5608 } 5609 } 5610 5611 if (!quiet) { 5612 printf("Formatting '%s', fmt=%s ", filename, fmt); 5613 qemu_opts_print(opts); 5614 puts(""); 5615 } 5616 5617 ret = bdrv_create(drv, filename, opts, &local_err); 5618 5619 if (ret == -EFBIG) { 5620 /* This is generally a better message than whatever the driver would 5621 * deliver (especially because of the cluster_size_hint), since that 5622 * is most probably not much different from "image too large". */ 5623 const char *cluster_size_hint = ""; 5624 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) { 5625 cluster_size_hint = " (try using a larger cluster size)"; 5626 } 5627 error_setg(errp, "The image size is too large for file format '%s'" 5628 "%s", fmt, cluster_size_hint); 5629 error_free(local_err); 5630 local_err = NULL; 5631 } 5632 5633 out: 5634 qemu_opts_del(opts); 5635 qemu_opts_free(create_opts); 5636 if (local_err) { 5637 error_propagate(errp, local_err); 5638 } 5639 } 5640 5641 AioContext *bdrv_get_aio_context(BlockDriverState *bs) 5642 { 5643 return bs->aio_context; 5644 } 5645 5646 void bdrv_detach_aio_context(BlockDriverState *bs) 5647 { 5648 if (!bs->drv) { 5649 return; 5650 } 5651 5652 if (bs->io_limits_enabled) { 5653 throttle_detach_aio_context(&bs->throttle_state); 5654 } 5655 if (bs->drv->bdrv_detach_aio_context) { 5656 bs->drv->bdrv_detach_aio_context(bs); 5657 } 5658 if (bs->file) { 5659 bdrv_detach_aio_context(bs->file); 5660 } 5661 if (bs->backing_hd) { 5662 bdrv_detach_aio_context(bs->backing_hd); 5663 } 5664 5665 bs->aio_context = NULL; 5666 } 5667 5668 void bdrv_attach_aio_context(BlockDriverState *bs, 5669 AioContext *new_context) 5670 { 5671 if (!bs->drv) { 5672 return; 5673 } 5674 5675 bs->aio_context = new_context; 5676 5677 if (bs->backing_hd) { 5678 bdrv_attach_aio_context(bs->backing_hd, new_context); 5679 } 5680 if (bs->file) { 5681 bdrv_attach_aio_context(bs->file, new_context); 5682 } 5683 if (bs->drv->bdrv_attach_aio_context) { 5684 bs->drv->bdrv_attach_aio_context(bs, new_context); 5685 } 5686 if (bs->io_limits_enabled) { 5687 throttle_attach_aio_context(&bs->throttle_state, new_context); 5688 } 5689 } 5690 5691 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context) 5692 { 5693 bdrv_drain_all(); /* ensure there are no in-flight requests */ 5694 5695 bdrv_detach_aio_context(bs); 5696 5697 /* This function executes in the old AioContext so acquire the new one in 5698 * case it runs in a different thread. 5699 */ 5700 aio_context_acquire(new_context); 5701 bdrv_attach_aio_context(bs, new_context); 5702 aio_context_release(new_context); 5703 } 5704 5705 void bdrv_add_before_write_notifier(BlockDriverState *bs, 5706 NotifierWithReturn *notifier) 5707 { 5708 notifier_with_return_list_add(&bs->before_write_notifiers, notifier); 5709 } 5710 5711 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts) 5712 { 5713 if (!bs->drv->bdrv_amend_options) { 5714 return -ENOTSUP; 5715 } 5716 return bs->drv->bdrv_amend_options(bs, opts); 5717 } 5718 5719 /* This function will be called by the bdrv_recurse_is_first_non_filter method 5720 * of block filter and by bdrv_is_first_non_filter. 5721 * It is used to test if the given bs is the candidate or recurse more in the 5722 * node graph. 5723 */ 5724 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs, 5725 BlockDriverState *candidate) 5726 { 5727 /* return false if basic checks fails */ 5728 if (!bs || !bs->drv) { 5729 return false; 5730 } 5731 5732 /* the code reached a non block filter driver -> check if the bs is 5733 * the same as the candidate. It's the recursion termination condition. 5734 */ 5735 if (!bs->drv->is_filter) { 5736 return bs == candidate; 5737 } 5738 /* Down this path the driver is a block filter driver */ 5739 5740 /* If the block filter recursion method is defined use it to recurse down 5741 * the node graph. 5742 */ 5743 if (bs->drv->bdrv_recurse_is_first_non_filter) { 5744 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate); 5745 } 5746 5747 /* the driver is a block filter but don't allow to recurse -> return false 5748 */ 5749 return false; 5750 } 5751 5752 /* This function checks if the candidate is the first non filter bs down it's 5753 * bs chain. Since we don't have pointers to parents it explore all bs chains 5754 * from the top. Some filters can choose not to pass down the recursion. 5755 */ 5756 bool bdrv_is_first_non_filter(BlockDriverState *candidate) 5757 { 5758 BlockDriverState *bs; 5759 5760 /* walk down the bs forest recursively */ 5761 QTAILQ_FOREACH(bs, &bdrv_states, device_list) { 5762 bool perm; 5763 5764 /* try to recurse in this top level bs */ 5765 perm = bdrv_recurse_is_first_non_filter(bs, candidate); 5766 5767 /* candidate is the first non filter */ 5768 if (perm) { 5769 return true; 5770 } 5771 } 5772 5773 return false; 5774 } 5775 5776 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp) 5777 { 5778 BlockDriverState *to_replace_bs = bdrv_find_node(node_name); 5779 if (!to_replace_bs) { 5780 error_setg(errp, "Node name '%s' not found", node_name); 5781 return NULL; 5782 } 5783 5784 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) { 5785 return NULL; 5786 } 5787 5788 /* We don't want arbitrary node of the BDS chain to be replaced only the top 5789 * most non filter in order to prevent data corruption. 5790 * Another benefit is that this tests exclude backing files which are 5791 * blocked by the backing blockers. 5792 */ 5793 if (!bdrv_is_first_non_filter(to_replace_bs)) { 5794 error_setg(errp, "Only top most non filter can be replaced"); 5795 return NULL; 5796 } 5797 5798 return to_replace_bs; 5799 } 5800 5801 void bdrv_io_plug(BlockDriverState *bs) 5802 { 5803 BlockDriver *drv = bs->drv; 5804 if (drv && drv->bdrv_io_plug) { 5805 drv->bdrv_io_plug(bs); 5806 } else if (bs->file) { 5807 bdrv_io_plug(bs->file); 5808 } 5809 } 5810 5811 void bdrv_io_unplug(BlockDriverState *bs) 5812 { 5813 BlockDriver *drv = bs->drv; 5814 if (drv && drv->bdrv_io_unplug) { 5815 drv->bdrv_io_unplug(bs); 5816 } else if (bs->file) { 5817 bdrv_io_unplug(bs->file); 5818 } 5819 } 5820 5821 void bdrv_flush_io_queue(BlockDriverState *bs) 5822 { 5823 BlockDriver *drv = bs->drv; 5824 if (drv && drv->bdrv_flush_io_queue) { 5825 drv->bdrv_flush_io_queue(bs); 5826 } else if (bs->file) { 5827 bdrv_flush_io_queue(bs->file); 5828 } 5829 } 5830