xref: /openbmc/qemu/backends/tpm/tpm_ioctl.h (revision 513eb437)
1 /*
2  * tpm_ioctl.h
3  *
4  * (c) Copyright IBM Corporation 2014, 2015.
5  *
6  * This file is licensed under the terms of the 3-clause BSD license
7  */
8 #ifndef _TPM_IOCTL_H_
9 #define _TPM_IOCTL_H_
10 
11 #if defined(__CYGWIN__)
12 # define __USE_LINUX_IOCTL_DEFS
13 #endif
14 
15 #include <stdint.h>
16 #include <sys/types.h>
17 #ifndef _WIN32
18 #include <sys/uio.h>
19 #include <sys/ioctl.h>
20 #endif
21 
22 #ifdef HAVE_SYS_IOCCOM_H
23 #include <sys/ioccom.h>
24 #endif
25 
26 /*
27  * Every response from a command involving a TPM command execution must hold
28  * the ptm_res as the first element.
29  * ptm_res corresponds to the error code of a command executed by the TPM.
30  */
31 
32 typedef uint32_t ptm_res;
33 
34 /* PTM_GET_TPMESTABLISHED: get the establishment bit */
35 struct ptm_est {
36     union {
37         struct {
38             ptm_res tpm_result;
39             unsigned char bit; /* TPM established bit */
40         } resp; /* response */
41     } u;
42 };
43 
44 /* PTM_RESET_TPMESTABLISHED: reset establishment bit */
45 struct ptm_reset_est {
46     union {
47         struct {
48             uint8_t loc; /* locality to use */
49         } req; /* request */
50         struct {
51             ptm_res tpm_result;
52         } resp; /* response */
53     } u;
54 };
55 
56 /* PTM_INIT */
57 struct ptm_init {
58     union {
59         struct {
60             uint32_t init_flags; /* see definitions below */
61         } req; /* request */
62         struct {
63             ptm_res tpm_result;
64         } resp; /* response */
65     } u;
66 };
67 
68 /* above init_flags */
69 #define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0)
70     /* delete volatile state file after reading it */
71 
72 /* PTM_SET_LOCALITY */
73 struct ptm_loc {
74     union {
75         struct {
76             uint8_t loc; /* locality to set */
77         } req; /* request */
78         struct {
79             ptm_res tpm_result;
80         } resp; /* response */
81     } u;
82 };
83 
84 /* PTM_HASH_DATA: hash given data */
85 struct ptm_hdata {
86     union {
87         struct {
88             uint32_t length;
89             uint8_t data[4096];
90         } req; /* request */
91         struct {
92             ptm_res tpm_result;
93         } resp; /* response */
94     } u;
95 };
96 
97 /*
98  * size of the TPM state blob to transfer; x86_64 can handle 8k,
99  * ppc64le only ~7k; keep the response below a 4k page size
100  */
101 #define PTM_STATE_BLOB_SIZE (3 * 1024)
102 
103 /*
104  * The following is the data structure to get state blobs from the TPM.
105  * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads
106  * with this ioctl and with adjusted offset are necessary. All bytes
107  * must be transferred and the transfer is done once the last byte has been
108  * returned.
109  * It is possible to use the read() interface for reading the data; however, the
110  * first bytes of the state blob will be part of the response to the ioctl(); a
111  * subsequent read() is only necessary if the total length (totlength) exceeds
112  * the number of received bytes. seek() is not supported.
113  */
114 struct ptm_getstate {
115     union {
116         struct {
117             uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */
118             uint32_t type;        /* which blob to pull */
119             uint32_t offset;      /* offset from where to read */
120         } req; /* request */
121         struct {
122             ptm_res tpm_result;
123             uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */
124             uint32_t totlength;   /* total length that will be transferred */
125             uint32_t length;      /* number of bytes in following buffer */
126             uint8_t  data[PTM_STATE_BLOB_SIZE];
127         } resp; /* response */
128     } u;
129 };
130 
131 /* TPM state blob types */
132 #define PTM_BLOB_TYPE_PERMANENT  1
133 #define PTM_BLOB_TYPE_VOLATILE   2
134 #define PTM_BLOB_TYPE_SAVESTATE  3
135 
136 /* state_flags above : */
137 #define PTM_STATE_FLAG_DECRYPTED     1 /* on input:  get decrypted state */
138 #define PTM_STATE_FLAG_ENCRYPTED     2 /* on output: state is encrypted */
139 
140 /*
141  * The following is the data structure to set state blobs in the TPM.
142  * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple
143  * 'writes' using this ioctl are necessary. The last packet is indicated
144  * by the length being smaller than the PTM_STATE_BLOB_SIZE.
145  * The very first packet may have a length indicator of '0' enabling
146  * a write() with all the bytes from a buffer. If the write() interface
147  * is used, a final ioctl with a non-full buffer must be made to indicate
148  * that all data were transferred (a write with 0 bytes would not work).
149  */
150 struct ptm_setstate {
151     union {
152         struct {
153             uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */
154             uint32_t type;        /* which blob to set */
155             uint32_t length;      /* length of the data;
156                                      use 0 on the first packet to
157                                      transfer using write() */
158             uint8_t data[PTM_STATE_BLOB_SIZE];
159         } req; /* request */
160         struct {
161             ptm_res tpm_result;
162         } resp; /* response */
163     } u;
164 };
165 
166 /*
167  * PTM_GET_CONFIG: Data structure to get runtime configuration information
168  * such as which keys are applied.
169  */
170 struct ptm_getconfig {
171     union {
172         struct {
173             ptm_res tpm_result;
174             uint32_t flags;
175         } resp; /* response */
176     } u;
177 };
178 
179 #define PTM_CONFIG_FLAG_FILE_KEY        0x1
180 #define PTM_CONFIG_FLAG_MIGRATION_KEY   0x2
181 
182 /*
183  * PTM_SET_BUFFERSIZE: Set the buffer size to be used by the TPM.
184  * A 0 on input queries for the current buffer size. Any other
185  * number will try to set the buffer size. The returned number is
186  * the buffer size that will be used, which can be larger than the
187  * requested one, if it was below the minimum, or smaller than the
188  * requested one, if it was above the maximum.
189  */
190 struct ptm_setbuffersize {
191     union {
192         struct {
193             uint32_t buffersize; /* 0 to query for current buffer size */
194         } req; /* request */
195         struct {
196             ptm_res tpm_result;
197             uint32_t buffersize; /* buffer size in use */
198             uint32_t minsize; /* min. supported buffer size */
199             uint32_t maxsize; /* max. supported buffer size */
200         } resp; /* response */
201     } u;
202 };
203 
204 #define PTM_GETINFO_SIZE (3 * 1024)
205 /*
206  * PTM_GET_INFO: Get info about the TPM implementation (from libtpms)
207  *
208  * This request allows to indirectly call TPMLIB_GetInfo(flags) and
209  * retrieve information from libtpms.
210  * Only one transaction is currently necessary for returning results
211  * to a client. Therefore, totlength and length will be the same if
212  * offset is 0.
213  */
214 struct ptm_getinfo {
215     union {
216         struct {
217             uint64_t flags;
218             uint32_t offset;      /* offset from where to read */
219             uint32_t pad;         /* 32 bit arch */
220         } req; /* request */
221         struct {
222             ptm_res tpm_result;
223             uint32_t totlength;
224             uint32_t length;
225             char buffer[PTM_GETINFO_SIZE];
226         } resp; /* response */
227     } u;
228 };
229 
230 #define SWTPM_INFO_TPMSPECIFICATION ((uint64_t)1 << 0)
231 #define SWTPM_INFO_TPMATTRIBUTES    ((uint64_t)1 << 1)
232 
233 /*
234  * PTM_LOCK_STORAGE: Lock the storage and retry n times
235  */
236 struct ptm_lockstorage {
237     union {
238         struct {
239             uint32_t retries; /* number of retries */
240         } req; /* request */
241         struct {
242             ptm_res tpm_result;
243         } resp; /* reponse */
244     } u;
245 };
246 
247 typedef uint64_t ptm_cap;
248 typedef struct ptm_est ptm_est;
249 typedef struct ptm_reset_est ptm_reset_est;
250 typedef struct ptm_loc ptm_loc;
251 typedef struct ptm_hdata ptm_hdata;
252 typedef struct ptm_init ptm_init;
253 typedef struct ptm_getstate ptm_getstate;
254 typedef struct ptm_setstate ptm_setstate;
255 typedef struct ptm_getconfig ptm_getconfig;
256 typedef struct ptm_setbuffersize ptm_setbuffersize;
257 typedef struct ptm_getinfo ptm_getinfo;
258 typedef struct ptm_lockstorage ptm_lockstorage;
259 
260 /* capability flags returned by PTM_GET_CAPABILITY */
261 #define PTM_CAP_INIT               (1)
262 #define PTM_CAP_SHUTDOWN           (1 << 1)
263 #define PTM_CAP_GET_TPMESTABLISHED (1 << 2)
264 #define PTM_CAP_SET_LOCALITY       (1 << 3)
265 #define PTM_CAP_HASHING            (1 << 4)
266 #define PTM_CAP_CANCEL_TPM_CMD     (1 << 5)
267 #define PTM_CAP_STORE_VOLATILE     (1 << 6)
268 #define PTM_CAP_RESET_TPMESTABLISHED (1 << 7)
269 #define PTM_CAP_GET_STATEBLOB      (1 << 8)
270 #define PTM_CAP_SET_STATEBLOB      (1 << 9)
271 #define PTM_CAP_STOP               (1 << 10)
272 #define PTM_CAP_GET_CONFIG         (1 << 11)
273 #define PTM_CAP_SET_DATAFD         (1 << 12)
274 #define PTM_CAP_SET_BUFFERSIZE     (1 << 13)
275 #define PTM_CAP_GET_INFO           (1 << 14)
276 #define PTM_CAP_SEND_COMMAND_HEADER (1 << 15)
277 #define PTM_CAP_LOCK_STORAGE       (1 << 16)
278 
279 #ifndef _WIN32
280 enum {
281     PTM_GET_CAPABILITY     = _IOR('P', 0, ptm_cap),
282     PTM_INIT               = _IOWR('P', 1, ptm_init),
283     PTM_SHUTDOWN           = _IOR('P', 2, ptm_res),
284     PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est),
285     PTM_SET_LOCALITY       = _IOWR('P', 4, ptm_loc),
286     PTM_HASH_START         = _IOR('P', 5, ptm_res),
287     PTM_HASH_DATA          = _IOWR('P', 6, ptm_hdata),
288     PTM_HASH_END           = _IOR('P', 7, ptm_res),
289     PTM_CANCEL_TPM_CMD     = _IOR('P', 8, ptm_res),
290     PTM_STORE_VOLATILE     = _IOR('P', 9, ptm_res),
291     PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est),
292     PTM_GET_STATEBLOB      = _IOWR('P', 11, ptm_getstate),
293     PTM_SET_STATEBLOB      = _IOWR('P', 12, ptm_setstate),
294     PTM_STOP               = _IOR('P', 13, ptm_res),
295     PTM_GET_CONFIG         = _IOR('P', 14, ptm_getconfig),
296     PTM_SET_DATAFD         = _IOR('P', 15, ptm_res),
297     PTM_SET_BUFFERSIZE     = _IOWR('P', 16, ptm_setbuffersize),
298     PTM_GET_INFO           = _IOWR('P', 17, ptm_getinfo),
299     PTM_LOCK_STORAGE       = _IOWR('P', 18, ptm_lockstorage),
300 };
301 #endif
302 
303 /*
304  * Commands used by the non-CUSE TPMs
305  *
306  * All messages container big-endian data.
307  *
308  * The return messages only contain the 'resp' part of the unions
309  * in the data structures above. Besides that the limits in the
310  * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data
311  * and ptm_set_state:u.req.data) are 0xffffffff.
312  */
313 enum {
314     CMD_GET_CAPABILITY = 1,   /* 0x01 */
315     CMD_INIT,                 /* 0x02 */
316     CMD_SHUTDOWN,             /* 0x03 */
317     CMD_GET_TPMESTABLISHED,   /* 0x04 */
318     CMD_SET_LOCALITY,         /* 0x05 */
319     CMD_HASH_START,           /* 0x06 */
320     CMD_HASH_DATA,            /* 0x07 */
321     CMD_HASH_END,             /* 0x08 */
322     CMD_CANCEL_TPM_CMD,       /* 0x09 */
323     CMD_STORE_VOLATILE,       /* 0x0a */
324     CMD_RESET_TPMESTABLISHED, /* 0x0b */
325     CMD_GET_STATEBLOB,        /* 0x0c */
326     CMD_SET_STATEBLOB,        /* 0x0d */
327     CMD_STOP,                 /* 0x0e */
328     CMD_GET_CONFIG,           /* 0x0f */
329     CMD_SET_DATAFD,           /* 0x10 */
330     CMD_SET_BUFFERSIZE,       /* 0x11 */
331     CMD_GET_INFO,             /* 0x12 */
332     CMD_LOCK_STORAGE,         /* 0x13 */
333 };
334 
335 #endif /* _TPM_IOCTL_H_ */
336