1# Makefile for QEMU. 2 3# Always point to the root of the build tree (needs GNU make). 4BUILD_DIR=$(CURDIR) 5 6# All following code might depend on configuration variables 7ifneq ($(wildcard config-host.mak),) 8# Put the all: rule here so that config-host.mak can contain dependencies. 9all: build-all 10include config-host.mak 11include $(SRC_PATH)/rules.mak 12config-host.mak: $(SRC_PATH)/configure 13 @echo $@ is out-of-date, running configure 14 @sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh 15else 16config-host.mak: 17 @echo "Please call configure before running make!" 18 @exit 1 19endif 20 21GENERATED_HEADERS = config-host.h trace.h qemu-options.def 22ifeq ($(TRACE_BACKEND),dtrace) 23GENERATED_HEADERS += trace-dtrace.h 24endif 25GENERATED_HEADERS += qmp-commands.h qapi-types.h qapi-visit.h 26GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c trace.c 27 28# Don't try to regenerate Makefile or configure 29# We don't generate any of them 30Makefile: ; 31configure: ; 32 33.PHONY: all clean cscope distclean dvi html info install install-doc \ 34 pdf recurse-all speed tar tarbin test build-all 35 36$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw) 37 38LIBS+=-lz $(LIBS_TOOLS) 39 40HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF) 41 42ifdef BUILD_DOCS 43DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 QMP/qmp-commands.txt 44ifdef CONFIG_VIRTFS 45DOCS+=fsdev/virtfs-proxy-helper.1 46endif 47else 48DOCS= 49endif 50 51SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory) BUILD_DIR=$(BUILD_DIR) 52SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS)) 53SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %/config-devices.mak.d, $(TARGET_DIRS)) 54 55config-all-devices.mak: $(SUBDIR_DEVICES_MAK) 56 $(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@") 57 58-include $(SUBDIR_DEVICES_MAK_DEP) 59 60%/config-devices.mak: default-configs/%.mak 61 $(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, " GEN $@") 62 @if test -f $@; then \ 63 if cmp -s $@.old $@; then \ 64 mv $@.tmp $@; \ 65 cp -p $@ $@.old; \ 66 else \ 67 if test -f $@.old; then \ 68 echo "WARNING: $@ (user modified) out of date.";\ 69 else \ 70 echo "WARNING: $@ out of date.";\ 71 fi; \ 72 echo "Run \"make defconfig\" to regenerate."; \ 73 rm $@.tmp; \ 74 fi; \ 75 else \ 76 mv $@.tmp $@; \ 77 cp -p $@ $@.old; \ 78 fi 79 80defconfig: 81 rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK) 82 83-include config-all-devices.mak 84 85build-all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all 86 87config-host.h: config-host.h-timestamp 88config-host.h-timestamp: config-host.mak 89qemu-options.def: $(SRC_PATH)/qemu-options.hx 90 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@") 91 92SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS)) 93 94subdir-%: 95 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,) 96 97ifneq ($(wildcard config-host.mak),) 98include $(SRC_PATH)/Makefile.objs 99endif 100 101subdir-libcacard: $(oslib-obj-y) $(trace-obj-y) qemu-timer-common.o 102 103$(filter %-softmmu,$(SUBDIR_RULES)): $(universal-obj-y) $(trace-obj-y) $(common-obj-y) $(extra-obj-y) subdir-libdis 104 105$(filter %-user,$(SUBDIR_RULES)): $(universal-obj-y) $(trace-obj-y) subdir-libdis-user subdir-libuser 106 107ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS)) 108romsubdir-%: 109 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",) 110 111ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS)) 112 113recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES) 114 115audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS) 116 117QEMU_CFLAGS+=$(CURL_CFLAGS) 118 119QEMU_CFLAGS += -I$(SRC_PATH)/include 120 121ui/cocoa.o: ui/cocoa.m 122 123ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS) 124 125ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS) 126 127bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS) 128 129version.o: $(SRC_PATH)/version.rc config-host.h 130 $(call quiet-command,$(WINDRES) -I. -o $@ $<," RC $(TARGET_DIR)$@") 131 132version-obj-$(CONFIG_WIN32) += version.o 133###################################################################### 134# Support building shared library libcacard 135 136.PHONY: libcacard.la install-libcacard 137ifeq ($(LIBTOOL),) 138libcacard.la: 139 @echo "libtool is missing, please install and rerun configure"; exit 1 140 141install-libcacard: 142 @echo "libtool is missing, please install and rerun configure"; exit 1 143else 144libcacard.la: $(oslib-obj-y) qemu-timer-common.o $(addsuffix .lo, $(basename $(trace-obj-y))) 145 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libcacard V="$(V)" TARGET_DIR="$*/" libcacard.la,) 146 147install-libcacard: libcacard.la 148 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libcacard V="$(V)" TARGET_DIR="$*/" install-libcacard,) 149endif 150###################################################################### 151 152qemu-img.o: qemu-img-cmds.h 153 154tools-obj-y = $(oslib-obj-y) $(trace-obj-y) qemu-tool.o qemu-timer.o \ 155 qemu-timer-common.o main-loop.o notify.o iohandler.o cutils.o async.o 156tools-obj-$(CONFIG_POSIX) += compatfd.o 157 158qemu-img$(EXESUF): qemu-img.o $(tools-obj-y) $(block-obj-y) 159qemu-nbd$(EXESUF): qemu-nbd.o $(tools-obj-y) $(block-obj-y) 160qemu-io$(EXESUF): qemu-io.o cmd.o $(tools-obj-y) $(block-obj-y) 161 162qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o 163 164fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/virtio-9p-marshal.o oslib-posix.o $(trace-obj-y) 165fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap 166 167qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx 168 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@") 169 170qapi-dir := $(BUILD_DIR)/qapi-generated 171qemu-ga$(EXESUF): LIBS = $(LIBS_QGA) 172qemu-ga$(EXESUF): QEMU_CFLAGS += -I $(qapi-dir) 173 174gen-out-type = $(subst .,-,$(suffix $@)) 175 176ifneq ($(wildcard config-host.mak),) 177include $(SRC_PATH)/tests/Makefile 178endif 179 180$(qapi-dir)/qga-qapi-types.c $(qapi-dir)/qga-qapi-types.h :\ 181$(SRC_PATH)/qapi-schema-guest.json $(SRC_PATH)/scripts/qapi-types.py 182 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py $(gen-out-type) -o "$(qapi-dir)" -p "qga-" < $<, " GEN $@") 183$(qapi-dir)/qga-qapi-visit.c $(qapi-dir)/qga-qapi-visit.h :\ 184$(SRC_PATH)/qapi-schema-guest.json $(SRC_PATH)/scripts/qapi-visit.py 185 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py $(gen-out-type) -o "$(qapi-dir)" -p "qga-" < $<, " GEN $@") 186$(qapi-dir)/qga-qmp-commands.h $(qapi-dir)/qga-qmp-marshal.c :\ 187$(SRC_PATH)/qapi-schema-guest.json $(SRC_PATH)/scripts/qapi-commands.py 188 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py $(gen-out-type) -o "$(qapi-dir)" -p "qga-" < $<, " GEN $@") 189 190qapi-types.c qapi-types.h :\ 191$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py 192 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py $(gen-out-type) -o "." < $<, " GEN $@") 193qapi-visit.c qapi-visit.h :\ 194$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py 195 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py $(gen-out-type) -o "." < $<, " GEN $@") 196qmp-commands.h qmp-marshal.c :\ 197$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py 198 $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py $(gen-out-type) -m -o "." < $<, " GEN $@") 199 200QGALIB_OBJ=$(addprefix $(qapi-dir)/, qga-qapi-types.o qga-qapi-visit.o qga-qmp-marshal.o) 201QGALIB_GEN=$(addprefix $(qapi-dir)/, qga-qapi-types.h qga-qapi-visit.h qga-qmp-commands.h) 202$(QGALIB_OBJ): $(QGALIB_GEN) 203$(qga-obj-y) qemu-ga.o: $(QGALIB_GEN) 204 205qemu-ga$(EXESUF): qemu-ga.o $(qga-obj-y) $(tools-obj-y) $(qapi-obj-y) $(qobject-obj-y) $(version-obj-y) $(QGALIB_OBJ) 206 207QEMULIBS=libhw32 libhw64 libuser libdis libdis-user 208 209clean: 210# avoid old build problems by removing potentially incorrect old files 211 rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h 212 rm -f qemu-options.def 213 rm -f *.o *.d *.a *.lo $(TOOLS) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~ 214 rm -Rf .libs 215 rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d qga/*.o qga/*.d 216 rm -f qom/*.o qom/*.d 217 rm -f qemu-img-cmds.h 218 rm -f trace/*.o trace/*.d 219 rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp 220 @# May not be present in GENERATED_HEADERS 221 rm -f trace-dtrace.h trace-dtrace.h-timestamp 222 rm -f $(foreach f,$(GENERATED_HEADERS),$(f) $(f)-timestamp) 223 rm -f $(foreach f,$(GENERATED_SOURCES),$(f) $(f)-timestamp) 224 rm -rf $(qapi-dir) 225 $(MAKE) -C tests/tcg clean 226 for d in $(ALL_SUBDIRS) $(QEMULIBS) libcacard; do \ 227 if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \ 228 rm -f $$d/qemu-options.def; \ 229 done 230 231distclean: clean 232 rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi 233 rm -f config-all-devices.mak 234 rm -f roms/seabios/config.mak roms/vgabios/config.mak 235 rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps qemu-doc.dvi 236 rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys 237 rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp 238 rm -f qemu-doc.vr 239 rm -f config.log 240 rm -f linux-headers/asm 241 rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr 242 for d in $(TARGET_DIRS) $(QEMULIBS); do \ 243 rm -rf $$d || exit 1 ; \ 244 done 245 246KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \ 247ar de en-us fi fr-be hr it lv nl pl ru th \ 248common de-ch es fo fr-ca hu ja mk nl-be pt sl tr 249 250ifdef INSTALL_BLOBS 251BLOBS=bios.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \ 252vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \ 253ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \ 254pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \ 255pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \ 256qemu-icon.bmp \ 257bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \ 258mpc8544ds.dtb \ 259multiboot.bin linuxboot.bin kvmvapic.bin \ 260s390-zipl.rom \ 261spapr-rtas.bin slof.bin \ 262palcode-clipper 263else 264BLOBS= 265endif 266 267install-doc: $(DOCS) 268 $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)" 269 $(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(qemu_docdir)" 270ifdef CONFIG_POSIX 271 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" 272 $(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1" 273 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8" 274 $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8" 275endif 276ifdef CONFIG_VIRTFS 277 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" 278 $(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1" 279endif 280 281install-datadir: 282 $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)" 283 284install-confdir: 285 $(INSTALL_DIR) "$(DESTDIR)$(qemu_confdir)" 286 287install-sysconfig: install-datadir install-confdir 288 $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(qemu_confdir)" 289 $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/cpus-x86_64.conf "$(DESTDIR)$(qemu_datadir)" 290 291install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig install-datadir 292 $(INSTALL_DIR) "$(DESTDIR)$(bindir)" 293ifneq ($(TOOLS),) 294 $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)" 295endif 296ifneq ($(HELPERS-y),) 297 $(INSTALL_DIR) "$(DESTDIR)$(libexecdir)" 298 $(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)" 299endif 300ifneq ($(BLOBS),) 301 set -e; for x in $(BLOBS); do \ 302 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \ 303 done 304endif 305 $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps" 306 set -e; for x in $(KEYMAPS); do \ 307 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \ 308 done 309 for d in $(TARGET_DIRS); do \ 310 $(MAKE) -C $$d $@ || exit 1 ; \ 311 done 312 313# various test targets 314test speed: all 315 $(MAKE) -C tests/tcg $@ 316 317.PHONY: TAGS 318TAGS: 319 find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags 320 321cscope: 322 rm -f ./cscope.* 323 find "$(SRC_PATH)" -name "*.[chsS]" -print | sed 's,^\./,,' > ./cscope.files 324 cscope -b 325 326# documentation 327MAKEINFO=makeinfo 328MAKEINFOFLAGS=--no-headers --no-split --number-sections 329TEXIFLAG=$(if $(V),,--quiet) 330%.dvi: %.texi 331 $(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@") 332 333%.html: %.texi 334 $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \ 335 " GEN $@") 336 337%.info: %.texi 338 $(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@") 339 340%.pdf: %.texi 341 $(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@") 342 343qemu-options.texi: $(SRC_PATH)/qemu-options.hx 344 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@") 345 346qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx 347 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@") 348 349QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx 350 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@") 351 352qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx 353 $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@") 354 355qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi 356 $(call quiet-command, \ 357 perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \ 358 $(POD2MAN) --section=1 --center=" " --release=" " qemu.pod > $@, \ 359 " GEN $@") 360 361qemu-img.1: qemu-img.texi qemu-img-cmds.texi 362 $(call quiet-command, \ 363 perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \ 364 $(POD2MAN) --section=1 --center=" " --release=" " qemu-img.pod > $@, \ 365 " GEN $@") 366 367fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi 368 $(call quiet-command, \ 369 perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< fsdev/virtfs-proxy-helper.pod && \ 370 $(POD2MAN) --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > $@, \ 371 " GEN $@") 372 373qemu-nbd.8: qemu-nbd.texi 374 $(call quiet-command, \ 375 perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \ 376 $(POD2MAN) --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \ 377 " GEN $@") 378 379dvi: qemu-doc.dvi qemu-tech.dvi 380html: qemu-doc.html qemu-tech.html 381info: qemu-doc.info qemu-tech.info 382pdf: qemu-doc.pdf qemu-tech.pdf 383 384qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \ 385 qemu-img.texi qemu-nbd.texi qemu-options.texi \ 386 qemu-monitor.texi qemu-img-cmds.texi 387 388VERSION ?= $(shell cat VERSION) 389FILE = qemu-$(VERSION) 390 391# tar release (use 'make -k tar' on a checkouted tree) 392tar: 393 rm -rf /tmp/$(FILE) 394 cp -r . /tmp/$(FILE) 395 cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn 396 rm -rf /tmp/$(FILE) 397 398# Add a dependency on the generated files, so that they are always 399# rebuilt before other object files 400Makefile: $(GENERATED_HEADERS) 401 402# Include automatically generated dependency files 403-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d qapi/*.d qga/*.d) 404