1# Makefile for QEMU. 2 3ifneq ($(words $(subst :, ,$(CURDIR))), 1) 4 $(error main directory cannot contain spaces nor colons) 5endif 6 7# Always point to the root of the build tree (needs GNU make). 8BUILD_DIR=$(CURDIR) 9 10# Before including a proper config-host.mak, assume we are in the source tree 11SRC_PATH=. 12 13UNCHECKED_GOALS := %clean TAGS cscope ctags dist \ 14 html info pdf txt \ 15 help check-help print-% \ 16 docker docker-% vm-help vm-test vm-build-% 17 18# All following code might depend on configuration variables 19ifneq ($(wildcard config-host.mak),) 20# Put the all: rule here so that config-host.mak can contain dependencies. 21all: 22include config-host.mak 23 24git-submodule-update: 25 26.PHONY: git-submodule-update 27 28git_module_status := $(shell \ 29 cd '$(SRC_PATH)' && \ 30 GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \ 31 echo $$?; \ 32) 33 34ifeq (1,$(git_module_status)) 35ifeq (no,$(GIT_UPDATE)) 36git-submodule-update: 37 $(call quiet-command, \ 38 echo && \ 39 echo "GIT submodule checkout is out of date. Please run" && \ 40 echo " scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \ 41 echo "from the source directory checkout $(SRC_PATH)" && \ 42 echo && \ 43 exit 1) 44else 45git-submodule-update: 46 $(call quiet-command, \ 47 (cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \ 48 "GIT","$(GIT_SUBMODULES)") 49endif 50endif 51 52export NINJA=./ninjatool 53 54# Running meson regenerates both build.ninja and ninjatool, and that is 55# enough to prime the rest of the build. 56ninjatool: build.ninja 57 58# Only needed in case Makefile.ninja does not exist. 59.PHONY: ninja-clean ninja-distclean clean-ctlist 60clean-ctlist: 61ninja-clean:: 62ninja-distclean:: 63build.ninja: config-host.mak 64 65Makefile.ninja: build.ninja ninjatool 66 ./ninjatool -t ninja2make --omit clean dist uninstall < $< > $@ 67-include Makefile.ninja 68 69${ninja-targets-c_COMPILER} ${ninja-targets-cpp_COMPILER}: .var.command += -MP 70 71# If MESON is empty, the rule will be re-evaluated after Makefiles are 72# reread (and MESON won't be empty anymore). 73ifneq ($(MESON),) 74Makefile.mtest: build.ninja scripts/mtest2make.py 75 $(MESON) introspect --tests | $(PYTHON) scripts/mtest2make.py > $@ 76-include Makefile.mtest 77endif 78 79.git-submodule-status: git-submodule-update config-host.mak 80 81# Check that we're not trying to do an out-of-tree build from 82# a tree that's been used for an in-tree build. 83ifneq ($(realpath $(SRC_PATH)),$(realpath .)) 84ifneq ($(wildcard $(SRC_PATH)/config-host.mak),) 85$(error This is an out of tree build but your source tree ($(SRC_PATH)) \ 86seems to have been used for an in-tree build. You can fix this by running \ 87"$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree) 88endif 89endif 90 91CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y) 92CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y) 93CONFIG_XEN := $(CONFIG_XEN_BACKEND) 94CONFIG_ALL=y 95-include config-all-devices.mak 96-include config-all-disas.mak 97 98config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION 99 @echo $@ is out-of-date, running configure 100 @if test -f meson-private/coredata.dat; then \ 101 ./config.status --skip-meson; \ 102 else \ 103 ./config.status; \ 104 fi 105 106# Force configure to re-run if the API symbols are updated 107ifeq ($(CONFIG_PLUGIN),y) 108config-host.mak: $(SRC_PATH)/plugins/qemu-plugins.symbols 109endif 110 111else 112config-host.mak: 113ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail)) 114 @echo "Please call configure before running make!" 115 @exit 1 116endif 117endif 118 119include $(SRC_PATH)/rules.mak 120 121# lor is defined in rules.mak 122CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS)) 123 124generated-files-y = config-host.h 125 126generated-files-y += module_block.h 127 128generated-files-y += .git-submodule-status 129 130# Don't try to regenerate Makefile or configure 131# We don't generate any of them 132Makefile: ; 133configure: ; 134 135.PHONY: all clean cscope distclean html info install install-doc \ 136 pdf txt recurse-all dist msi FORCE 137 138$(call set-vpath, $(SRC_PATH)) 139 140LIBS+=-lz $(LIBS_TOOLS) 141 142HELPERS-y = $(HELPERS) 143 144# Sphinx does not allow building manuals into the same directory as 145# the source files, so if we're doing an in-tree QEMU build we must 146# build the manuals into a subdirectory (and then install them from 147# there for 'make install'). For an out-of-tree build we can just 148# use the docs/ subdirectory in the build tree as normal. 149ifeq ($(realpath $(SRC_PATH)),$(realpath .)) 150MANUAL_BUILDDIR := docs/built 151else 152MANUAL_BUILDDIR := docs 153endif 154 155ifdef BUILD_DOCS 156DOCS+=$(MANUAL_BUILDDIR)/system/qemu.1 157DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-img.1 158DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-nbd.8 159DOCS+=$(MANUAL_BUILDDIR)/interop/qemu-ga.8 160ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy) 161DOCS+=$(MANUAL_BUILDDIR)/tools/virtiofsd.1 162endif 163DOCS+=$(MANUAL_BUILDDIR)/system/qemu-block-drivers.7 164DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7 165DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7 166DOCS+=$(MANUAL_BUILDDIR)/system/qemu-cpu-models.7 167DOCS+=$(MANUAL_BUILDDIR)/index.html 168ifdef CONFIG_VIRTFS 169DOCS+=$(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1 170endif 171ifdef CONFIG_TRACE_SYSTEMTAP 172DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1 173endif 174else 175DOCS= 176endif 177 178SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR) 179SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(filter %-softmmu, $(TARGET_DIRS))) 180SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %.d, $(SUBDIR_DEVICES_MAK)) 181 182ifeq ($(SUBDIR_DEVICES_MAK),) 183config-all-devices.mak: config-host.mak 184 $(call quiet-command,echo '# no devices' > $@,"GEN","$@") 185else 186config-all-devices.mak: $(SUBDIR_DEVICES_MAK) config-host.mak 187 $(call quiet-command, sed -n \ 188 's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \ 189 $(SUBDIR_DEVICES_MAK) | sort -u > $@, \ 190 "GEN","$@") 191endif 192 193-include $(SUBDIR_DEVICES_MAK_DEP) 194 195# This has to be kept in sync with Kconfig.host. 196MINIKCONF_ARGS = \ 197 $(CONFIG_MINIKCONF_MODE) \ 198 $@ $*/config-devices.mak.d $< $(SRC_PATH)/Kconfig \ 199 CONFIG_TCG=$(CONFIG_TCG) \ 200 CONFIG_KVM=$(CONFIG_KVM) \ 201 CONFIG_SPICE=$(CONFIG_SPICE) \ 202 CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \ 203 CONFIG_TPM=$(CONFIG_TPM) \ 204 CONFIG_XEN=$(CONFIG_XEN) \ 205 CONFIG_OPENGL=$(CONFIG_OPENGL) \ 206 CONFIG_X11=$(CONFIG_X11) \ 207 CONFIG_VHOST_USER=$(CONFIG_VHOST_USER) \ 208 CONFIG_VHOST_KERNEL=$(CONFIG_VHOST_KERNEL) \ 209 CONFIG_VIRTFS=$(CONFIG_VIRTFS) \ 210 CONFIG_LINUX=$(CONFIG_LINUX) \ 211 CONFIG_PVRDMA=$(CONFIG_PVRDMA) 212 213MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py 214 215$(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(SRC_PATH)/Kconfig $(BUILD_DIR)/config-host.mak 216 $(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \ 217 > $@.tmp, "GEN", "$@.tmp") 218 $(call quiet-command, if test -f $@; then \ 219 if cmp -s $@.old $@; then \ 220 mv $@.tmp $@; \ 221 cp -p $@ $@.old; \ 222 else \ 223 if test -f $@.old; then \ 224 echo "WARNING: $@ (user modified) out of date.";\ 225 else \ 226 echo "WARNING: $@ out of date.";\ 227 fi; \ 228 echo "Run \"$(MAKE) defconfig\" to regenerate."; \ 229 rm $@.tmp; \ 230 fi; \ 231 else \ 232 mv $@.tmp $@; \ 233 cp -p $@ $@.old; \ 234 fi,"GEN","$@"); 235 236defconfig: 237 rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK) 238 239ifneq ($(wildcard config-host.mak),) 240include $(SRC_PATH)/Makefile.objs 241endif 242 243dummy := $(call unnest-vars,, \ 244 chardev-obj-y \ 245 block-obj-y \ 246 block-obj-m \ 247 storage-daemon-obj-y \ 248 storage-daemon-obj-m \ 249 io-obj-y \ 250 common-obj-y \ 251 common-obj-m) 252 253include $(SRC_PATH)/tests/Makefile.include 254 255all: $(DOCS) $(if $(BUILD_DOCS),sphinxdocs) $(TOOLS) $(HELPERS-y) recurse-all modules 256 257config-host.h: config-host.h-timestamp 258config-host.h-timestamp: config-host.mak 259 260TARGET_DIRS_RULES := $(foreach t, all fuzz clean install, $(addsuffix /$(t), $(TARGET_DIRS))) 261 262SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES)) 263$(SOFTMMU_ALL_RULES): $(authz-obj-y) 264$(SOFTMMU_ALL_RULES): $(block-obj-y) 265$(SOFTMMU_ALL_RULES): $(storage-daemon-obj-y) 266$(SOFTMMU_ALL_RULES): $(chardev-obj-y) 267$(SOFTMMU_ALL_RULES): $(crypto-obj-y) 268$(SOFTMMU_ALL_RULES): $(io-obj-y) 269$(SOFTMMU_ALL_RULES): $(qom-obj-y) 270$(SOFTMMU_ALL_RULES): config-all-devices.mak 271 272SOFTMMU_FUZZ_RULES=$(filter %-softmmu/fuzz, $(TARGET_DIRS_RULES)) 273$(SOFTMMU_FUZZ_RULES): $(authz-obj-y) 274$(SOFTMMU_FUZZ_RULES): $(block-obj-y) 275$(SOFTMMU_FUZZ_RULES): $(chardev-obj-y) 276$(SOFTMMU_FUZZ_RULES): $(crypto-obj-y) 277$(SOFTMMU_FUZZ_RULES): $(io-obj-y) 278$(SOFTMMU_FUZZ_RULES): config-all-devices.mak 279$(SOFTMMU_FUZZ_RULES): $(edk2-decompressed) 280 281.PHONY: $(TARGET_DIRS_RULES) 282# The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that 283# $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal 284$(TARGET_DIRS_RULES): 285 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),) 286 287# LIBFDT_lib="": avoid breaking existing trees with objects requiring -fPIC 288DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib="" 289DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS) 290DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt 291 292.PHONY: dtc/all 293dtc/all: .git-submodule-status dtc/libfdt 294 $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt,) 295 296dtc/%: .git-submodule-status 297 @mkdir -p $@ 298 299# Overriding CFLAGS causes us to lose defines added in the sub-makefile. 300# Not overriding CFLAGS leads to mis-matches between compilation modes. 301# Therefore we replicate some of the logic in the sub-makefile. 302# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't; 303# no need to annoy QEMU developers with such things. 304CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS)) 305CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM 306CAP_CFLAGS += -DCAPSTONE_HAS_ARM 307CAP_CFLAGS += -DCAPSTONE_HAS_ARM64 308CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC 309CAP_CFLAGS += -DCAPSTONE_HAS_X86 310 311.PHONY: capstone/all 312capstone/all: .git-submodule-status 313 $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE)) 314 315.PHONY: slirp/all 316slirp/all: .git-submodule-status 317 $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp \ 318 BUILD_DIR="$(BUILD_DIR)/slirp" \ 319 PKG_CONFIG="$(PKG_CONFIG)" \ 320 CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" \ 321 CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)") 322 323$(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \ 324 $(qom-obj-y) 325 326$(filter %/fuzz, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \ 327 $(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY)) 328 329ROM_DIRS = $(addprefix pc-bios/, $(ROMS)) 330ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS))) 331# Only keep -O and -g cflags 332.PHONY: $(ROM_DIRS_RULES) 333$(ROM_DIRS_RULES): 334 $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),) 335 336.PHONY: recurse-all recurse-clean recurse-install 337recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS)) 338recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS)) 339recurse-install: $(addsuffix /install, $(TARGET_DIRS)) 340$(addsuffix /install, $(TARGET_DIRS)): all 341 342$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h 343 $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o") 344 345Makefile: $(version-obj-y) 346 347###################################################################### 348 349COMMON_LDADDS = libqemuutil.a 350 351qemu-img.o: qemu-img-cmds.h 352 353qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) 354qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) 355qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) 356qemu-storage-daemon$(EXESUF): qemu-storage-daemon.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(chardev-obj-y) $(io-obj-y) $(qom-obj-y) $(storage-daemon-obj-y) $(COMMON_LDADDS) 357 358scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS) 359ifdef CONFIG_MPATH 360scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist 361endif 362 363module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak 364 $(call quiet-command,$(PYTHON) $< $@ \ 365 $(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \ 366 "GEN","$@") 367 368clean: recurse-clean ninja-clean clean-ctlist 369 -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean 370# avoid old build problems by removing potentially incorrect old files 371 rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h 372 rm -f qemu-options.def 373 find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f \ 374 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \ 375 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \ 376 ! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \ 377 -exec rm {} + 378 rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) TAGS cscope.* *.pod *~ */*~ 379 rm -f fsdev/*.pod scsi/*.pod 380 rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp) 381 rm -f config-all-devices.mak 382 rm -f $(SUBDIR_DEVICES_MAK) 383 384VERSION ?= $(shell cat VERSION) 385 386dist: qemu-$(VERSION).tar.bz2 387 388qemu-%.tar.bz2: 389 $(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)" 390 391define clean-manual = 392rm -rf $(MANUAL_BUILDDIR)/$1/_static 393rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html 394endef 395 396distclean: clean ninja-distclean 397 -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean -g 398 rm -f config-host.mak config-host.h* $(DOCS) 399 rm -f tests/tcg/config-*.mak 400 rm -f config-all-devices.mak config-all-disas.mak config.status 401 rm -f $(SUBDIR_DEVICES_MAK) 402 rm -f po/*.mo tests/qemu-iotests/common.env 403 rm -f roms/seabios/config.mak roms/vgabios/config.mak 404 rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols 405 rm -rf meson-private meson-logs meson-info compile_commands.json 406 rm -f Makefile.ninja ninjatool ninjatool.stamp Makefile.mtest 407 rm -f config.log 408 rm -f linux-headers/asm 409 rm -f docs/version.texi 410 rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi 411 rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7 412 rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt 413 rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf 414 rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html 415 rm -rf .doctrees 416 $(call clean-manual,devel) 417 $(call clean-manual,interop) 418 $(call clean-manual,specs) 419 $(call clean-manual,system) 420 $(call clean-manual,tools) 421 $(call clean-manual,user) 422 for d in $(TARGET_DIRS); do \ 423 rm -rf $$d || exit 1 ; \ 424 done 425 rm -Rf .sdk 426 427KEYMAPS=da en-gb et fr fr-ch is lt no pt-br sv \ 428ar de en-us fi fr-be hr it lv nl pl ru th \ 429de-ch es fo fr-ca hu ja mk pt sl tr \ 430bepo cz 431 432ifdef INSTALL_BLOBS 433BLOBS=bios.bin bios-256k.bin bios-microvm.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \ 434vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \ 435vgabios-ramfb.bin vgabios-bochs-display.bin vgabios-ati.bin \ 436openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \ 437pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \ 438pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \ 439efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \ 440efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \ 441efi-e1000e.rom efi-vmxnet3.rom \ 442qemu-nsis.bmp \ 443bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \ 444multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \ 445s390-ccw.img s390-netboot.img \ 446slof.bin skiboot.lid \ 447palcode-clipper \ 448u-boot.e500 u-boot-sam460-20100605.bin \ 449qemu_vga.ndrv \ 450edk2-licenses.txt \ 451hppa-firmware.img \ 452opensbi-riscv32-sifive_u-fw_jump.bin opensbi-riscv32-virt-fw_jump.bin \ 453opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin 454else 455BLOBS= 456endif 457 458# Note that we manually filter-out the non-Sphinx documentation which 459# is currently built into the docs/interop directory in the build tree, 460# and also any sphinx-built manpages. 461define install-manual = 462for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done 463for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done 464endef 465 466# Note that we deliberately do not install the "devel" manual: it is 467# for QEMU developers, and not interesting to our users. 468.PHONY: install-sphinxdocs 469install-sphinxdocs: sphinxdocs 470 $(call install-manual,interop) 471 $(call install-manual,specs) 472 $(call install-manual,system) 473 $(call install-manual,tools) 474 $(call install-manual,user) 475 476install-doc: $(DOCS) install-sphinxdocs 477 $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)" 478 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/index.html "$(DESTDIR)$(qemu_docdir)" 479 $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop" 480 $(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)/interop" 481 $(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)/interop" 482ifdef CONFIG_POSIX 483 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" 484 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu.1 "$(DESTDIR)$(mandir)/man1" 485 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7" 486 $(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7" 487 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7" 488 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7" 489ifeq ($(CONFIG_TOOLS),y) 490 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-img.1 "$(DESTDIR)$(mandir)/man1" 491 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8" 492 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-nbd.8 "$(DESTDIR)$(mandir)/man8" 493endif 494ifdef CONFIG_TRACE_SYSTEMTAP 495 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1" 496endif 497ifeq ($(CONFIG_GUEST_AGENT),y) 498 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8" 499 $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop" 500 $(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)/interop" 501 $(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)/interop" 502 $(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7" 503endif 504endif 505ifdef CONFIG_VIRTFS 506 $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" 507 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1" 508endif 509ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy) 510 $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtiofsd.1 "$(DESTDIR)$(mandir)/man1" 511endif 512 513install-datadir: 514 $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)" 515 516install-localstatedir: 517ifdef CONFIG_POSIX 518ifeq ($(CONFIG_GUEST_AGENT),y) 519 $(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run 520endif 521endif 522 523ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512 524 525install-includedir: 526 $(INSTALL_DIR) "$(DESTDIR)$(includedir)" 527 528# Needed by "meson install" 529export DESTDIR 530install: all $(if $(BUILD_DOCS),install-doc) \ 531 install-datadir install-localstatedir install-includedir \ 532 recurse-install 533ifneq ($(TOOLS),) 534 $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir)) 535endif 536ifneq ($(CONFIG_MODULES),) 537 $(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)" 538 for s in $(modules-m:.mo=$(DSOSUF)); do \ 539 t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \ 540 $(INSTALL_LIB) $$s "$$t"; \ 541 test -z "$(STRIP)" || $(STRIP) "$$t"; \ 542 done 543endif 544ifneq ($(HELPERS-y),) 545 $(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir)) 546endif 547ifdef CONFIG_TRACE_SYSTEMTAP 548 $(INSTALL_PROG) "scripts/qemu-trace-stap" $(DESTDIR)$(bindir) 549endif 550ifneq ($(BLOBS),) 551 set -e; for x in $(BLOBS); do \ 552 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \ 553 done 554endif 555 for s in $(ICON_SIZES); do \ 556 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps"; \ 557 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_$${s}.png \ 558 "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps/qemu.png"; \ 559 done; \ 560 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps"; \ 561 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_32x32.bmp \ 562 "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps/qemu.bmp"; \ 563 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps"; \ 564 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu.svg \ 565 "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps/qemu.svg" 566 mkdir -p "$(DESTDIR)$(qemu_desktopdir)" 567 $(INSTALL_DATA) $(SRC_PATH)/ui/qemu.desktop \ 568 "$(DESTDIR)$(qemu_desktopdir)/qemu.desktop" 569ifdef CONFIG_GTK 570 $(MAKE) -C po $@ 571endif 572ifeq ($(CONFIG_PLUGIN),y) 573 $(INSTALL_DATA) $(SRC_PATH)/include/qemu/qemu-plugin.h "$(DESTDIR)$(includedir)/qemu-plugin.h" 574endif 575 $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps" 576 set -e; for x in $(KEYMAPS); do \ 577 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \ 578 done 579 for d in $(TARGET_DIRS); do \ 580 $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \ 581 done 582 583# documentation 584MAKEINFO=makeinfo 585MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D) 586MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES) 587TEXI2PODFLAGS=$(MAKEINFOINCLUDES) -DVERSION="$(VERSION)" -DCONFDIR="$(qemu_confdir)" 588TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES) 589 590docs/version.texi: $(SRC_PATH)/VERSION config-host.mak 591 $(call quiet-command,(\ 592 echo "@set VERSION $(VERSION)" && \ 593 echo "@set CONFDIR $(qemu_confdir)" \ 594 )> $@,"GEN","$@") 595 596%.html: %.texi docs/version.texi 597 $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \ 598 --html $< -o $@,"GEN","$@") 599 600%.info: %.texi docs/version.texi 601 $(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@") 602 603%.txt: %.texi docs/version.texi 604 $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \ 605 --plaintext $< -o $@,"GEN","$@") 606 607%.pdf: %.texi docs/version.texi 608 $(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@") 609 610# Sphinx builds all its documentation at once in one invocation 611# and handles "don't rebuild things unless necessary" itself. 612# The '.doctrees' files are cached information to speed this up. 613.PHONY: sphinxdocs 614sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html \ 615 $(MANUAL_BUILDDIR)/interop/index.html \ 616 $(MANUAL_BUILDDIR)/specs/index.html \ 617 $(MANUAL_BUILDDIR)/system/index.html \ 618 $(MANUAL_BUILDDIR)/tools/index.html \ 619 $(MANUAL_BUILDDIR)/user/index.html 620 621# Canned command to build a single manual 622# Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man') 623# Note the use of different doctree for each (manual, builder) tuple; 624# this works around Sphinx not handling parallel invocation on 625# a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946 626build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1") 627# We assume all RST files in the manual's directory are used in it 628manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \ 629 $(SRC_PATH)/docs/defs.rst.inc \ 630 $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py \ 631 $(SRC_PATH)/docs/sphinx/*.py 632# Macro to write out the rule and dependencies for building manpages 633# Usage: $(call define-manpage-rule,manualname,manpage1 manpage2...[,extradeps]) 634# 'extradeps' is optional, and specifies extra files (eg .hx files) that 635# the manual page depends on. 636define define-manpage-rule 637$(call atomic,$(foreach manpage,$2,$(MANUAL_BUILDDIR)/$1/$(manpage)),$(call manual-deps,$1) $3) 638 $(call build-manual,$1,man) 639endef 640 641$(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel) 642 $(call build-manual,devel,html) 643 644$(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop) 645 $(call build-manual,interop,html) 646 647$(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs) 648 $(call build-manual,specs,html) 649 650$(MANUAL_BUILDDIR)/system/index.html: $(call manual-deps,system) $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/qemu-options.hx 651 $(call build-manual,system,html) 652 653$(MANUAL_BUILDDIR)/tools/index.html: $(call manual-deps,tools) $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc 654 $(call build-manual,tools,html) 655 656$(MANUAL_BUILDDIR)/user/index.html: $(call manual-deps,user) 657 $(call build-manual,user,html) 658 659$(call define-manpage-rule,interop,qemu-ga.8) 660 661$(call define-manpage-rule,system,qemu.1 qemu-block-drivers.7 qemu-cpu-models.7) 662 663$(call define-manpage-rule,tools,\ 664 qemu-img.1 qemu-nbd.8 qemu-trace-stap.1\ 665 virtiofsd.1 virtfs-proxy-helper.1,\ 666 $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc) 667 668$(MANUAL_BUILDDIR)/index.html: $(SRC_PATH)/docs/index.html.in qemu-version.h 669 @mkdir -p "$(MANUAL_BUILDDIR)" 670 $(call quiet-command, sed "s|@@VERSION@@|${VERSION}|g" $< >$@, \ 671 "GEN","$@") 672 673docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi 674 @cp -p $< $@ 675 676docs/interop/qemu-ga-qapi.texi: qga/qga-qapi-doc.texi 677 @cp -p $< $@ 678 679html: docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html sphinxdocs 680info: docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info 681pdf: docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf 682txt: docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt 683 684docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \ 685 docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \ 686 docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \ 687 docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi 688 689docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \ 690 docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \ 691 docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \ 692 docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi 693 694$(filter %.1 %.7 %.8,$(DOCS)): scripts/texi2pod.pl 695 696# Reports/Analysis 697 698%/coverage-report.html: 699 @mkdir -p $* 700 $(call quiet-command,\ 701 gcovr -r $(SRC_PATH) \ 702 $(foreach t, $(TARGET_DIRS), --object-directory $(BUILD_DIR)/$(t)) \ 703 --object-directory $(BUILD_DIR) \ 704 -p --html --html-details -o $@, \ 705 "GEN", "coverage-report.html") 706 707.PHONY: coverage-report 708coverage-report: $(CURDIR)/reports/coverage/coverage-report.html 709 710ifdef CONFIG_WIN32 711 712INSTALLER = qemu-setup-$(VERSION)$(EXESUF) 713 714nsisflags = -V2 -NOCD 715 716ifneq ($(wildcard $(SRC_PATH)/dll),) 717ifeq ($(ARCH),x86_64) 718# 64 bit executables 719DLL_PATH = $(SRC_PATH)/dll/w64 720nsisflags += -DW64 721else 722# 32 bit executables 723DLL_PATH = $(SRC_PATH)/dll/w32 724endif 725endif 726 727.PHONY: installer 728installer: $(INSTALLER) 729 730INSTDIR=/tmp/qemu-nsis 731 732$(INSTALLER): $(SRC_PATH)/qemu.nsi 733 $(MAKE) install DESTDIR=${INSTDIR} 734ifdef SIGNCODE 735 (cd ${INSTDIR}/${bindir}; \ 736 for i in *.exe; do \ 737 $(SIGNCODE) $${i}; \ 738 done \ 739 ) 740endif # SIGNCODE 741 (cd ${INSTDIR}/${bindir}; \ 742 for i in qemu-system-*.exe; do \ 743 arch=$${i%.exe}; \ 744 arch=$${arch#qemu-system-}; \ 745 echo Section \"$$arch\" Section_$$arch; \ 746 echo SetOutPath \"\$$INSTDIR\"; \ 747 echo File \"\$${BINDIR}\\$$i\"; \ 748 echo SectionEnd; \ 749 done \ 750 ) >${INSTDIR}/${bindir}/system-emulations.nsh 751 makensis $(nsisflags) \ 752 $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \ 753 $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \ 754 -DBINDIR="${INSTDIR}/${bindir}" \ 755 $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \ 756 -DSRCDIR="$(SRC_PATH)" \ 757 -DOUTFILE="$(INSTALLER)" \ 758 -DDISPLAYVERSION="$(VERSION)" \ 759 $(SRC_PATH)/qemu.nsi 760 rm -r ${INSTDIR} 761ifdef SIGNCODE 762 $(SIGNCODE) $(INSTALLER) 763endif # SIGNCODE 764endif # CONFIG_WIN 765 766# Add a dependency on the generated files, so that they are always 767# rebuilt before other object files 768ifneq ($(wildcard config-host.mak),) 769ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail)) 770Makefile: $(generated-files-y) 771endif 772endif 773 774# Include automatically generated dependency files 775# Dependencies in Makefile.objs files come from our recursive subdir rules 776-include $(wildcard *.d tests/*.d) 777 778include $(SRC_PATH)/tests/docker/Makefile.include 779include $(SRC_PATH)/tests/vm/Makefile.include 780 781print-help-run = printf " %-30s - %s\\n" "$1" "$2" 782print-help = $(quiet-@)$(call print-help-run,$1,$2) 783 784.PHONY: help 785help: 786 @echo 'Generic targets:' 787 $(call print-help,all,Build all) 788ifdef CONFIG_MODULES 789 $(call print-help,modules,Build all modules) 790endif 791 $(call print-help,dir/file.o,Build specified target only) 792 $(call print-help,install,Install QEMU, documentation and tools) 793 $(call print-help,ctags/TAGS,Generate tags file for editors) 794 $(call print-help,cscope,Generate cscope index) 795 $(call print-help,sparse,Run sparse on the QEMU source) 796 @echo '' 797 @$(if $(TARGET_DIRS), \ 798 echo 'Architecture specific targets:'; \ 799 $(foreach t, $(TARGET_DIRS), \ 800 $(call print-help-run,$(t)/all,Build for $(t)); \ 801 $(if $(CONFIG_FUZZ), \ 802 $(if $(findstring softmmu,$(t)), \ 803 $(call print-help-run,$(t)/fuzz,Build fuzzer for $(t)); \ 804 ))) \ 805 echo '') 806 @$(if $(HELPERS-y), \ 807 echo 'Helper targets:'; \ 808 $(foreach t, $(HELPERS-y), \ 809 $(call print-help-run,$(t),Build $(shell basename $(t)));) \ 810 echo '') 811 @$(if $(TOOLS), \ 812 echo 'Tools targets:'; \ 813 $(foreach t, $(TOOLS), \ 814 $(call print-help-run,$(t),Build $(shell basename $(t)) tool);) \ 815 echo '') 816 @echo 'Cleaning targets:' 817 $(call print-help,clean,Remove most generated files but keep the config) 818 $(call print-help,distclean,Remove all generated files) 819 $(call print-help,dist,Build a distributable tarball) 820 @echo '' 821 @echo 'Test targets:' 822 $(call print-help,check,Run all tests (check-help for details)) 823 $(call print-help,docker,Help about targets running tests inside containers) 824 $(call print-help,vm-help,Help about targets running tests inside VM) 825 @echo '' 826 @echo 'Documentation targets:' 827 $(call print-help,html info pdf txt,Build documentation in specified format) 828 @echo '' 829ifdef CONFIG_WIN32 830 @echo 'Windows targets:' 831 $(call print-help,installer,Build NSIS-based installer for QEMU) 832ifdef QEMU_GA_MSI_ENABLED 833 $(call print-help,msi,Build MSI-based installer for qemu-ga) 834endif 835 @echo '' 836endif 837 $(call print-help,$(MAKE) [targets],(quiet build, default)) 838 $(call print-help,$(MAKE) V=1 [targets],(verbose build)) 839
