1 /** 2 * Copyright 2017 Google Inc. 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #include "config.h" 18 19 #include "buildjson/buildjson.hpp" 20 #include "conf.hpp" 21 #include "dbus/dbusconfiguration.hpp" 22 #include "interfaces.hpp" 23 #include "pid/builder.hpp" 24 #include "pid/buildjson.hpp" 25 #include "pid/pidloop.hpp" 26 #include "pid/tuning.hpp" 27 #include "pid/zone.hpp" 28 #include "sensors/builder.hpp" 29 #include "sensors/buildjson.hpp" 30 #include "sensors/manager.hpp" 31 #include "util.hpp" 32 33 #include <CLI/CLI.hpp> 34 #include <boost/asio/io_context.hpp> 35 #include <boost/asio/signal_set.hpp> 36 #include <boost/asio/steady_timer.hpp> 37 #include <sdbusplus/asio/connection.hpp> 38 #include <sdbusplus/bus.hpp> 39 #include <sdbusplus/server/manager.hpp> 40 41 #include <chrono> 42 #include <filesystem> 43 #include <iostream> 44 #include <list> 45 #include <map> 46 #include <memory> 47 #include <thread> 48 #include <unordered_map> 49 #include <utility> 50 #include <vector> 51 52 namespace pid_control 53 { 54 55 /* The configuration converted sensor list. */ 56 std::map<std::string, conf::SensorConfig> sensorConfig = {}; 57 /* The configuration converted PID list. */ 58 std::map<int64_t, conf::PIDConf> zoneConfig = {}; 59 /* The configuration converted Zone configuration. */ 60 std::map<int64_t, conf::ZoneConfig> zoneDetailsConfig = {}; 61 62 } // namespace pid_control 63 64 /** the swampd daemon will check for the existence of this file. */ 65 constexpr auto jsonConfigurationPath = "/usr/share/swampd/config.json"; 66 std::string configPath = ""; 67 68 /* async io context for operation */ 69 boost::asio::io_context io; 70 /* async signal_set for signal handling */ 71 boost::asio::signal_set signals(io, SIGHUP); 72 73 /* buses for system control */ 74 static sdbusplus::asio::connection modeControlBus(io); 75 static sdbusplus::asio::connection 76 hostBus(io, sdbusplus::bus::new_system().release()); 77 static sdbusplus::asio::connection 78 passiveBus(io, sdbusplus::bus::new_system().release()); 79 80 namespace pid_control 81 { 82 83 void restartControlLoops() 84 { 85 static SensorManager mgmr; 86 static std::unordered_map<int64_t, std::shared_ptr<ZoneInterface>> zones; 87 static std::vector<std::shared_ptr<boost::asio::steady_timer>> timers; 88 static bool isCanceling = false; 89 90 for (const auto& timer : timers) 91 { 92 timer->cancel(); 93 } 94 isCanceling = true; 95 timers.clear(); 96 97 if (zones.size() > 0 && zones.begin()->second.use_count() > 1) 98 { 99 throw std::runtime_error("wait for count back to 1"); 100 } 101 zones.clear(); 102 isCanceling = false; 103 104 const std::string& path = 105 (configPath.length() > 0) ? configPath : jsonConfigurationPath; 106 107 if (std::filesystem::exists(path)) 108 { 109 /* 110 * When building the sensors, if any of the dbus passive ones aren't on 111 * the bus, it'll fail immediately. 112 */ 113 try 114 { 115 auto jsonData = parseValidateJson(path); 116 sensorConfig = buildSensorsFromJson(jsonData); 117 std::tie(zoneConfig, zoneDetailsConfig) = 118 buildPIDsFromJson(jsonData); 119 } 120 catch (const std::exception& e) 121 { 122 std::cerr << "Failed during building: " << e.what() << "\n"; 123 exit(EXIT_FAILURE); /* fatal error. */ 124 } 125 } 126 else 127 { 128 static boost::asio::steady_timer reloadTimer(io); 129 if (!dbus_configuration::init(modeControlBus, reloadTimer, sensorConfig, 130 zoneConfig, zoneDetailsConfig)) 131 { 132 return; // configuration not ready 133 } 134 } 135 136 mgmr = buildSensors(sensorConfig, passiveBus, hostBus); 137 zones = buildZones(zoneConfig, zoneDetailsConfig, mgmr, modeControlBus); 138 139 if (0 == zones.size()) 140 { 141 std::cerr << "No zones defined, exiting.\n"; 142 std::exit(EXIT_FAILURE); 143 } 144 145 for (const auto& i : zones) 146 { 147 std::shared_ptr<boost::asio::steady_timer> timer = timers.emplace_back( 148 std::make_shared<boost::asio::steady_timer>(io)); 149 std::cerr << "pushing zone " << i.first << "\n"; 150 pidControlLoop(i.second, timer, &isCanceling); 151 } 152 } 153 154 void tryRestartControlLoops(bool first) 155 { 156 static int count = 0; 157 static const auto delayTime = std::chrono::seconds(10); 158 static boost::asio::steady_timer timer(io); 159 // try to start a control loop while the loop has been scheduled. 160 if (first && count != 0) 161 { 162 std::cerr 163 << "ControlLoops has been scheduled, refresh the loop count\n"; 164 count = 1; 165 return; 166 } 167 168 auto restartLbd = [](const boost::system::error_code& error) { 169 if (error == boost::asio::error::operation_aborted) 170 { 171 return; 172 } 173 174 // for the last loop, don't elminate the failure of restartControlLoops. 175 if (count >= 5) 176 { 177 restartControlLoops(); 178 // reset count after succesful restartControlLoops() 179 count = 0; 180 return; 181 } 182 183 // retry when restartControlLoops() has some failure. 184 try 185 { 186 restartControlLoops(); 187 // reset count after succesful restartControlLoops() 188 count = 0; 189 } 190 catch (const std::exception& e) 191 { 192 std::cerr << count 193 << " Failed during restartControlLoops, try again: " 194 << e.what() << "\n"; 195 tryRestartControlLoops(false); 196 } 197 }; 198 count++; 199 // first time of trying to restart the control loop without a delay 200 if (first) 201 { 202 boost::asio::post(io, 203 std::bind(restartLbd, boost::system::error_code())); 204 } 205 // re-try control loop, set up a delay. 206 else 207 { 208 timer.expires_after(delayTime); 209 timer.async_wait(restartLbd); 210 } 211 212 return; 213 } 214 215 } // namespace pid_control 216 217 void sighupHandler(const boost::system::error_code& error, int signal_number) 218 { 219 static boost::asio::steady_timer timer(io); 220 221 if (error) 222 { 223 std::cout << "Signal " << signal_number 224 << " handler error: " << error.message() << "\n"; 225 return; 226 } 227 228 timer.expires_after(std::chrono::seconds(1)); 229 timer.async_wait([](const boost::system::error_code ec) { 230 if (ec) 231 { 232 std::cout << "Signal timer error: " << ec.message() << "\n"; 233 return; 234 } 235 236 std::cout << "reloading configuration\n"; 237 pid_control::tryRestartControlLoops(); 238 }); 239 signals.async_wait(sighupHandler); 240 } 241 242 int main(int argc, char* argv[]) 243 { 244 loggingPath = ""; 245 loggingEnabled = false; 246 tuningEnabled = false; 247 248 CLI::App app{"OpenBMC Fan Control Daemon"}; 249 250 app.add_option("-c,--conf", configPath, 251 "Optional parameter to specify configuration at run-time") 252 ->check(CLI::ExistingFile); 253 app.add_option("-l,--log", loggingPath, 254 "Optional parameter to specify logging folder") 255 ->check(CLI::ExistingDirectory); 256 app.add_flag("-t,--tuning", tuningEnabled, "Enable or disable tuning"); 257 258 CLI11_PARSE(app, argc, argv); 259 260 static constexpr auto loggingEnablePath = "/etc/thermal.d/logging"; 261 static constexpr auto tuningEnablePath = "/etc/thermal.d/tuning"; 262 263 // Set up default logging path, preferring command line if it was given 264 std::string defLoggingPath(loggingPath); 265 if (defLoggingPath.empty()) 266 { 267 defLoggingPath = std::filesystem::temp_directory_path(); 268 } 269 else 270 { 271 // Enable logging, if user explicitly gave path on command line 272 loggingEnabled = true; 273 } 274 275 // If this file exists, enable logging at runtime 276 std::ifstream fsLogging(loggingEnablePath); 277 if (fsLogging) 278 { 279 // The first line of file might be a valid directory path 280 std::getline(fsLogging, loggingPath); 281 fsLogging.close(); 282 283 // If so, use it, otherwise use default logging path instead 284 if (!(std::filesystem::exists(loggingPath))) 285 { 286 loggingPath = defLoggingPath; 287 } 288 289 loggingEnabled = true; 290 } 291 292 if (loggingEnabled) 293 { 294 std::cerr << "Logging enabled: " << loggingPath << "\n"; 295 } 296 297 // If this file exists, enable tuning at runtime 298 if (std::filesystem::exists(tuningEnablePath)) 299 { 300 tuningEnabled = true; 301 } 302 303 // This can also be enabled from the command line 304 if (tuningEnabled) 305 { 306 std::cerr << "Tuning enabled\n"; 307 } 308 309 static constexpr auto modeRoot = "/xyz/openbmc_project/settings/fanctrl"; 310 // Create a manager for the ModeBus because we own it. 311 sdbusplus::server::manager_t(static_cast<sdbusplus::bus_t&>(modeControlBus), 312 modeRoot); 313 hostBus.request_name("xyz.openbmc_project.Hwmon.external"); 314 modeControlBus.request_name("xyz.openbmc_project.State.FanCtrl"); 315 sdbusplus::server::manager_t objManager(modeControlBus, modeRoot); 316 317 // Enable SIGHUP handling to reload JSON config 318 signals.async_wait(sighupHandler); 319 320 /* 321 * All sensors are managed by one manager, but each zone has a pointer to 322 * it. 323 */ 324 325 pid_control::tryRestartControlLoops(); 326 327 io.run(); 328 return 0; 329 } 330