1# Sensor id is the key 20x60: 3 sensorType: 0x07 4 sensorReadingType: 0x6F 5 # A "set" operation on this sensor should update this d-bus path. 6 # If the path is not specified, an MRW parser will try to determine the path 7 # based on the sensor id, on MRW based systems. This typically happens for 8 # inventory items. 9 path: /org/open_power/control/occ0 10 # The interface that exposes method(s) to update the path above. 11 serviceInterface: org.freedesktop.DBus.Properties 12 # Where the sensor value is represented - assertion bits/reading/event data 13 readingType: assertion 14 # indicate if a sensor is READ/WRITE/RW. 15 # This particular sensor read and write operation is allowed 16 mutability: Mutability::Write|Mutability::Read 17 # Sensor name would be occ0 18 sensorNamePattern: nameLeaf 19 eventType: 0x6F 20 # All the d-bus interfaces : properties that must be updated for this path 21 interfaces: 22 # One or more interface dict entries 23 org.open_power.OCC.Status: 24 OccActive: 25 Offsets: 26 # Sensor type specific offset 27 0x06: 28 # OccActive is a boolean 29 type: "bool" 30 # If offset 0x06 is asserted, set OccActive as false. 31 assert: "false" 32 deassert: "true" 33 340x61: 35 sensorType: 0x04 36 sensorReadingType: 0x6F 37 # Inventory paths intentionally leave out the inventory root, 38 # /xyz/openbmc_project/inventory, because phosphor-inventory-manager 39 # adds that. 40 path: /system/chassis/motherboard/dimm1 41 serviceInterface: xyz.openbmc_project.Inventory.Manager 42 readingType: assertion 43 mutability: Mutability::Write|Mutability::Read 44 sensorNamePattern: nameLeaf 45 interfaces: 46 xyz.openbmc_project.State.Decorator.OperationalStatus: 47 Functional: 48 #Offsets contain the offsets in the sensor data. 49 Offsets: 50 0x06: 51 assert: true 52 deassert: false 53 type: bool 54 #Prereqs are pre-requisites for this property value to be true. 55 Prereqs: 56 0x04: 57 assert: false 58 deassert: true 59 type: bool 60 xyz.openbmc_project.Inventory.Item: 61 Present: 62 Offsets: 63 0x04: 64 assert: false 65 deassert: true 66 type: bool 67 680x63: 69 interfaces: 70 xyz.openbmc_project.Control.Boot.RebootAttempts: 71 AttemptsLeft: 72 Offsets: 73 0xFF: 74 type: uint32_t 75 path: /xyz/openbmc_project/state/host0 76 # A special case of assertion, where the entire assert bitfield 77 # serves as the value, or reading. Hence, the offset above is intentionally 78 # 0xFF, to indicate not to check any specific bits in the assertion. 79 readingType: readingAssertion 80 # Sensor name would be AttemptsLeft 81 sensorNamePattern: nameProperty 82 sensorReadingType: 0x6F 83 mutability: Mutability::Write|Mutability::Read 84 sensorType: 0xC3 85 serviceInterface: org.freedesktop.DBus.Properties 86 870x62: 88 interfaces: 89 xyz.openbmc_project.Control.Boot.RebootAttempts: 90 AttemptsLeft: 91 Offsets: 92 0xFF: 93 type: uint32_t 94 path: /xyz/openbmc_project/state/host1 95 readingType: readingAssertion 96 # set an explicit name for the sensor 97 sensorName: RebootAttempts 98 sensorReadingType: 0x6F 99 mutability: Mutability::Write|Mutability::Read 100 sensorType: 0xC3 101 serviceInterface: org.freedesktop.DBus.Properties 102 1030xD0: 104 sensorType: 0x01 105 path: /xyz/openbmc_project/sensors/temperature/fleeting0 106 sensorReadingType: 0x01 107 multiplierM: 511 108 offsetB: 0 109 bExp: 0 110 # Result exponent field in Type 1 SDR(2's complement, signed) 111 rExp: 0 112 # Applies for analog sensors, the actual reading value for the sensor is 113 # Value * 10^N 114 scale: -3 115 # Indicate Analog Data Format, Rate unit, Modifier unit and Percentage 116 sensorUnits1 : 0x80 117 mutability: Mutability::Write|Mutability::Read 118 serviceInterface: org.freedesktop.DBus.Properties 119 readingType: readingData 120 sensorNamePattern: nameLeaf 121 interfaces: 122 xyz.openbmc_project.Sensor.Value: 123 Value: 124 Offsets: 125 0xFF: 126 type: int64_t 127 1280x54: 129 sensorType: 0x07 130 path: /system/chassis/motherboard/cpu0/core22 131 sensorReadingType: 0x6F 132 serviceInterface: xyz.openbmc_project.Inventory.Manager 133 readingType: assertion 134 mutability: Mutability::Write|Mutability::Read 135 # Sensor name would be cpu0_core22 136 sensorNamePattern: nameParentLeaf 137 interfaces: 138 xyz.openbmc_project.State.Decorator.OperationalStatus: 139 Functional: 140 Offsets: 141 0x08: 142 assert: false 143 deassert: true 144 type: bool 145 Prereqs: 146 0x07: 147 assert: true 148 deassert: false 149 xyz.openbmc_project.Inventory.Item: 150 Present: 151 Offsets: 152 0x07: 153 assert: true 154 deassert: false 155 #The update will be skipped based on the value of skipOn 156 #in this case if offset 0x07 is deasserted 157 #the update will be skipped. 158 skipOn: deassert 159 type: bool 160 1610xC5: 162 sensorType: 0x17 163 path: /system/chassis/motherboard/gv100card0 164 sensorReadingType: 1 165 serviceInterface: xyz.openbmc_project.Inventory.Manager 166 readingType: assertion 167 mutability: Mutability::Write|Mutability::Read 168 sensorNamePattern: nameLeaf 169 interfaces: 170 xyz.openbmc_project.Inventory.Decorator.Replaceable: 171 FieldReplaceable: 172 Offsets: 173 7: 174 assert: true 175 type: bool 176 xyz.openbmc_project.Inventory.Item: 177 Present: 178 Offsets: 179 7: 180 assert: true 181 deassert: false 182 type: bool 183 # Example of an interface with no attached properties 184 xyz.openbmc_project.Inventory.Item.Accelerator: 185 xyz.openbmc_project.State.Decorator.OperationalStatus: 186 Functional: 187 Offsets: 188 8: 189 assert: false 190 type: bool 191 Prereqs: 192 7: 193 assert: true 194 type: bool 195