1description: >
2    Implement to provide control of voltage regulator devices from dbus
3    Control.VoltageRegulatorProfile.Supported is read only.  Implementation of
4    the Supported property populates the list of supported modes.  In the case
5    where the VR has a well defined default, implementations should place the
6    default in index 0.
7    Control.VoltageRegulatorProfile.Current is read/write and sets the
8    implementation specific mode for the voltage regulator to run in.  The
9    definitions of said enum are implementation defined, as systems likely will
10    have a multitude of possible states.  Some examples of naming might be
11    "HighPower" or "LowPower" in the case of bipolar power states, or might be
12    something more complex like, "Profile 1", "Profile 2", "Profile 3" if the VR
13    itself defines the interfaces.
14    Implementations may implement this alongside to a VoltageRegulatorControl
15    interface, and may react to the results of changes to the Control interface.
16
17properties:
18    - name: Supported
19      type: array[string]
20      flags:
21          - readonly
22      description: >
23          An implementation specific list of supported modes that the voltage
24          regulator control application can be configured to provide for a
25          platform.
26    - name: Selected
27      type: string
28      default: "Default"
29      description: >
30          The current mode the voltage regulator control application should
31          use.  This can be read to verify the current mode, or written to
32          change to a new mode.
33