1description: > 2 Implement to provide control of voltage regulator devices from dbus 3 Control.VoltageRegulatorProfile.Supported is read only. Implementation of 4 the Supported property populates the list of supported modes. In the case 5 where the VR has a well defined default, implementations should place the 6 default in index 0. 7 Control.VoltageRegulatorProfile.Current is read/write and sets the 8 implementation specific mode for the voltage regulator to run in. The 9 definitions of said enum are implementation defined, as systems likely will 10 have a multitude of possible states. Some examples of naming might be 11 "HighPower" or "LowPower" in the case of bipolar power states, or might be 12 something more complex like, "Profile 1", "Profile 2", "Profile 3" if the VR 13 itself defines the interfaces. 14 Implementations may implement this alongside to a VoltageRegulatorControl 15 interface, and may react to the results of changes to the Control interface. 16 17properties: 18 - name: Supported 19 type: array[string] 20 flags: 21 - readonly 22 description: > 23 An implementation specific list of supported modes that the voltage 24 regulator control application can be configured to provide for a 25 platform. 26 - name: Selected 27 type: string 28 default: "Default" 29 description: > 30 The current mode the voltage regulator control application should 31 use. This can be read to verify the current mode, or written to 32 change to a new mode. 33