1INHIBIT_SYSROOT_STRIP = "1" 2 3PACKAGES = "${PN}-dbg catchsegv sln nscd ldd tzcode glibc-thread-db ${PN}-pic libcidn libmemusage libnss-db libsegfault ${PN}-pcprofile libsotruss ${PN} ${PN}-utils glibc-extra-nss ${PN}-dev ${PN}-staticdev ${PN}-doc ldconfig" 4 5# The ld.so in this glibc supports the GNU_HASH 6RPROVIDES_${PN} = "eglibc rtld(GNU_HASH)" 7RPROVIDES_${PN}-utils = "eglibc-utils" 8RPROVIDES_${PN}-mtrace = "eglibc-mtrace libc-mtrace" 9RPROVIDES_${PN}-pic = "eglibc-pic" 10RPROVIDES_${PN}-dev = "eglibc-dev libc6-dev virtual-libc-dev" 11RPROVIDES_${PN}-staticdev = "eglibc-staticdev" 12RPROVIDES_${PN}-doc = "eglibc-doc" 13RPROVIDES_glibc-extra-nss = "eglibc-extra-nss" 14RPROVIDES_glibc-thread-db = "eglibc-thread-db" 15RPROVIDES_${PN}-pcprofile = "eglibc-pcprofile" 16RPROVIDES_${PN}-dbg = "eglibc-dbg" 17libc_baselibs = "${base_libdir}/libc.so.* ${base_libdir}/libc-*.so ${base_libdir}/libm*.so.* ${base_libdir}/libm-*.so ${base_libdir}/libmvec-*.so ${base_libdir}/ld*.so.* ${base_libdir}/ld-*.so ${base_libdir}/libpthread*.so.* ${base_libdir}/libpthread-*.so ${base_libdir}/libresolv*.so.* ${base_libdir}/libresolv-*.so ${base_libdir}/librt*.so.* ${base_libdir}/librt-*.so ${base_libdir}/libutil*.so.* ${base_libdir}/libutil-*.so ${base_libdir}/libnsl*.so.* ${base_libdir}/libnsl-*.so ${base_libdir}/libnss_files*.so.* ${base_libdir}/libnss_files-*.so ${base_libdir}/libnss_compat*.so.* ${base_libdir}/libnss_compat-*.so ${base_libdir}/libnss_dns*.so.* ${base_libdir}/libnss_dns-*.so ${base_libdir}/libdl*.so.* ${base_libdir}/libdl-*.so ${base_libdir}/libanl*.so.* ${base_libdir}/libanl-*.so ${base_libdir}/libBrokenLocale*.so.* ${base_libdir}/libBrokenLocale-*.so" 18ARCH_DYNAMIC_LOADER = "" 19# The aarch64 ABI says the dynamic linker -must- be 20# /lib/ld-linux-aarch64{,_be}.so.1. With usrmerge, that may mean that 21# we need to install it in /usr/lib. 22ARCH_DYNAMIC_LOADER_aarch64 = "ld-linux-${TARGET_ARCH}.so.1" 23libc_baselibs_append = " ${@oe.utils.conditional('ARCH_DYNAMIC_LOADER', '', '', '${root_prefix}/lib/${ARCH_DYNAMIC_LOADER}', d)}" 24INSANE_SKIP_${PN}_append_aarch64 = " libdir" 25 26FILES_${PN} = "${libc_baselibs} ${libexecdir}/*" 27RRECOMMENDS_${PN} = "${@bb.utils.filter('DISTRO_FEATURES', 'ldconfig', d)}" 28FILES_ldconfig = "${base_sbindir}/ldconfig ${sysconfdir}/ld.so.conf" 29FILES_ldd = "${bindir}/ldd" 30FILES_libsegfault = "${base_libdir}/libSegFault*" 31FILES_libcidn = "${base_libdir}/libcidn-*.so ${base_libdir}/libcidn.so.*" 32FILES_libmemusage = "${base_libdir}/libmemusage.so" 33FILES_libnss-db = "${base_libdir}/libnss_db.so.* ${base_libdir}/libnss_db-*.so ${localstatedir}/db/Makefile ${localstatedir}/db/makedbs.sh" 34RDEPENDS_libnss-db = "${PN}-utils" 35FILES_glibc-extra-nss = "${base_libdir}/libnss_*-*.so ${base_libdir}/libnss_*.so.*" 36FILES_sln = "${base_sbindir}/sln" 37FILES_${PN}-pic = "${libdir}/*_pic.a ${libdir}/*_pic.map ${libdir}/libc_pic/*.o" 38FILES_libsotruss = "${libdir}/audit/sotruss-lib.so" 39FILES_SOLIBSDEV = "${libdir}/lib*${SOLIBSDEV}" 40FILES_${PN}-dev += "${libdir}/*_nonshared.a ${base_libdir}/*_nonshared.a ${base_libdir}/*.o ${datadir}/aclocal" 41RDEPENDS_${PN}-dev = "linux-libc-headers-dev" 42FILES_${PN}-staticdev += "${libdir}/*.a ${base_libdir}/*.a" 43FILES_nscd = "${sbindir}/nscd* ${sysconfdir}/init.d/nscd ${systemd_unitdir}/system/nscd* ${sysconfdir}/tmpfiles.d/nscd.conf \ 44 ${sysconfdir}/nscd.conf ${sysconfdir}/default/volatiles/98_nscd ${localstatedir}/db/nscd" 45FILES_${PN}-mtrace = "${bindir}/mtrace" 46FILES_tzcode = "${bindir}/tzselect ${sbindir}/zic ${sbindir}/zdump" 47FILES_${PN}-utils = "${bindir}/* ${sbindir}/*" 48FILES_catchsegv = "${bindir}/catchsegv" 49RDEPENDS_catchsegv = "libsegfault" 50FILES_${PN}-pcprofile = "${base_libdir}/libpcprofile.so" 51FILES_glibc-thread-db = "${base_libdir}/libthread_db.so.* ${base_libdir}/libthread_db-*.so" 52RPROVIDES_${PN}-dev += "libc-dev" 53RPROVIDES_${PN}-staticdev += "libc-staticdev" 54 55SUMMARY_sln = "The static ln" 56DESCRIPTION_sln = "Similar to the 'ln' utility, but statically linked. sln is useful to make symbolic links to dynamic libraries if the dynamic linking system, for some reason, is not functional." 57SUMMARY_nscd = "Name service cache daemon" 58DESCRIPTION_nscd = "nscd, name service cache daemon, caches name service lookups for the passwd, group and hosts information. It can damatically improvide performance with remote, such as NIS or NIS+, name services." 59SUMMARY_glibc-extra-nss = "hesiod, NIS and NIS+ nss libraries" 60DESCRIPTION_glibc-extra-nss = "glibc: nis, nisplus and hesiod search services." 61SUMMARY_ldd = "print shared library dependencies" 62DESCRIPTION_ldd = "${bindir}/ldd prints shared library dependencies for each program or shared library specified on the command line." 63SUMMARY_${PN}-utils = "Miscellaneous utilities provided by glibc" 64DESCRIPTION_${PN}-utils = "Miscellaneous utilities including getconf, iconv, locale, gencat, ..." 65DESCRIPTION_libsotruss = "Library to support sotruss which traces calls through PLTs" 66DESCRIPTION_tzcode = "tzcode, timezone zoneinfo utils -- zic, zdump, tzselect" 67 68inherit libc-common multilib_header 69 70do_install_append () { 71 rm -f ${D}${sysconfdir}/localtime 72 73 # remove empty glibc dir 74 if [ -d ${D}${libexecdir} ]; then 75 rmdir --ignore-fail-on-non-empty ${D}${libexecdir} 76 fi 77 78 oe_multilib_header bits/syscall.h bits/long-double.h bits/floatn.h 79 80 if [ -f ${D}${bindir}/mtrace ]; then 81 sed -i -e '1s,#!.*perl,#! ${USRBINPATH}/env perl,' -e '2s,exec.*perl,exec ${USRBINPATH}/env perl,' ${D}${bindir}/mtrace 82 fi 83 # Info dir listing isn't interesting at this point so remove it if it exists. 84 if [ -e "${D}${infodir}/dir" ]; then 85 rm -f ${D}${infodir}/dir 86 fi 87 88 install -d ${D}${sysconfdir}/init.d 89 install -d ${D}${localstatedir}/db/nscd 90 install -m 0755 ${S}/nscd/nscd.init ${D}${sysconfdir}/init.d/nscd 91 install -m 0755 ${S}/nscd/nscd.conf ${D}${sysconfdir}/nscd.conf 92 install -m 0755 ${WORKDIR}/makedbs.sh ${D}${localstatedir}/db 93 sed -i "s%daemon%start-stop-daemon --start --exec%g" ${D}${sysconfdir}/init.d/nscd 94 sed -i "s|\(enable-cache\t\+netgroup\t\+\)yes|\1no|" ${D}${sysconfdir}/nscd.conf 95 96 install -d ${D}${systemd_unitdir}/system 97 install -m 0644 ${S}/nscd/nscd.service ${D}${systemd_unitdir}/system/ 98 99 # The dynamic loader will have been installed into 100 # ${base_libdir}. However, if that isn't going to end up being 101 # available in the ABI-mandated location, then a symlink must 102 # be created. 103 104 if [ -n "${ARCH_DYNAMIC_LOADER}" -a ! -e "${D}${root_prefix}/lib/${ARCH_DYNAMIC_LOADER}" ]; then 105 install -d ${D}${root_prefix}/lib 106 ln -s ${@oe.path.relative('${root_prefix}/lib', '${base_libdir}')}/${ARCH_DYNAMIC_LOADER} \ 107 ${D}${root_prefix}/lib/${ARCH_DYNAMIC_LOADER} 108 fi 109} 110 111do_install_append_class-target() { 112 if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then 113 install -d ${D}${sysconfdir}/tmpfiles.d 114 echo "d /run/nscd 755 root root -" \ 115 > ${D}${sysconfdir}/tmpfiles.d/nscd.conf 116 fi 117 118 if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'true', 'false', d)}; then 119 install -d ${D}${sysconfdir}/default/volatiles 120 echo "d root root 0755 /var/run/nscd none" \ 121 > ${D}${sysconfdir}/default/volatiles/98_nscd 122 fi 123 124} 125do_install_append_aarch64 () { 126 do_install_armmultilib 127} 128 129do_install_append_arm () { 130 do_install_armmultilib 131} 132 133do_install_append_armeb () { 134 do_install_armmultilib 135} 136 137do_install_armmultilib () { 138 oe_multilib_header bits/endian.h bits/fcntl.h bits/fenv.h bits/fp-fast.h bits/hwcap.h bits/ipc.h bits/link.h bits/wordsize.h 139 oe_multilib_header bits/local_lim.h bits/mman.h bits/msq.h bits/pthreadtypes.h bits/pthreadtypes-arch.h bits/sem.h bits/semaphore.h bits/setjmp.h 140 oe_multilib_header bits/shm.h bits/sigstack.h bits/stat.h bits/statfs.h bits/typesizes.h 141 oe_multilib_header bits/procfs-id.h bits/procfs.h bits/shmlba.h 142 143 oe_multilib_header fpu_control.h gnu/lib-names.h gnu/stubs.h ieee754.h 144 145 oe_multilib_header sys/elf.h sys/procfs.h sys/ptrace.h sys/ucontext.h sys/user.h 146} 147 148 149LOCALESTASH = "${WORKDIR}/stashed-locale" 150bashscripts = "mtrace sotruss xtrace" 151 152do_stash_locale () { 153 dest=${LOCALESTASH} 154 install -d $dest${base_libdir} $dest${bindir} $dest${libdir} $dest${datadir} 155 # Hide away the locale data from the deployment 156 if [ -e ${D}${bindir}/localedef ]; then 157 cp -a ${D}${bindir}/localedef $dest${bindir} 158 fi 159 if [ -e ${D}${libdir}/gconv ]; then 160 cp -a ${D}${libdir}/gconv $dest${libdir} 161 fi 162 if [ -e ${D}${datadir}/i18n ]; then 163 cp -a ${D}${datadir}/i18n $dest${datadir} 164 fi 165 166 # Make a copy of all the libraries into the locale stash 167 cp -fpPR ${D}${libdir}/* $dest${libdir} 168 if [ "${base_libdir}" != "${libdir}" ]; then 169 cp -fpPR ${D}${base_libdir}/* $dest${base_libdir} 170 fi 171 if [ -e ${D}${exec_prefix}/lib ]; then 172 if [ ${exec_prefix}/lib != ${base_libdir} ] && [ ${exec_prefix}/lib != ${libdir} ]; then 173 cp -fpPR ${D}${exec_prefix}/lib $dest${exec_prefix} 174 fi 175 fi 176 177 cp -fpPR ${D}${datadir}/* $dest${datadir} 178 rm -rf ${D}${datadir}/locale/ 179 cp -fpPR ${WORKDIR}/SUPPORTED $dest 180 181 target=$dest/scripts 182 mkdir -p $target 183 for i in ${bashscripts}; do 184 if [ -f ${D}${bindir}/$i ]; then 185 cp ${D}${bindir}/$i $target/ 186 fi 187 done 188} 189 190addtask do_stash_locale after do_install before do_populate_sysroot do_package 191do_stash_locale[dirs] = "${B}" 192do_stash_locale[cleandirs] = "${LOCALESTASH}" 193SSTATETASKS += "do_stash_locale" 194do_stash_locale[sstate-inputdirs] = "${LOCALESTASH}" 195do_stash_locale[sstate-outputdirs] = "${COMPONENTS_DIR}/${PACKAGE_ARCH}/glibc-stash-locale" 196do_stash_locale[sstate-fixmedir] = "${COMPONENTS_DIR}/${PACKAGE_ARCH}/glibc-stash-locale" 197 198python do_stash_locale_setscene () { 199 sstate_setscene(d) 200} 201addtask do_stash_locale_setscene 202 203PACKAGE_PREPROCESS_FUNCS += "stash_locale_package_cleanup" 204SYSROOT_PREPROCESS_FUNCS += "stash_locale_sysroot_cleanup" 205stash_locale_cleanup () { 206 cleanupdir=$1 207 # Remove all files which do_stash_locale() copies 208 for i in ${bashscripts}; do 209 rm -f $cleanupdir${bindir}/$i 210 done 211 rm -f $cleanupdir${bindir}/localedef 212 rm -rf $cleanupdir${datadir}/i18n 213 rm -rf $cleanupdir${libdir}/gconv 214 rm -rf $cleanupdir${localedir} 215 rm -rf $cleanupdir${datadir}/locale 216 if [ "${libdir}" != "${exec_prefix}/lib" ] && [ "${root_prefix}/lib" != "${exec_prefix}/lib" ]; then 217 if [ -d "$cleanupdir${exec_prefix}/lib" ]; then 218 if [ -z "${ARCH_DYNAMIC_LOADER}" -o \ 219 ! -e "$cleanupdir${exec_prefix}/lib/${ARCH_DYNAMIC_LOADER}" ]; then 220 # error out if directory isn't empty 221 # this dir should only contain locale dir 222 # which has been deleted in the previous step 223 rmdir $cleanupdir${exec_prefix}/lib 224 fi 225 fi 226 fi 227} 228 229stash_locale_sysroot_cleanup() { 230 stash_locale_cleanup ${SYSROOT_DESTDIR} 231} 232stash_locale_package_cleanup() { 233 stash_locale_cleanup ${PKGD} 234} 235 236pkg_postinst_nscd () { 237 if [ -z "$D" ]; then 238 if command -v systemd-tmpfiles >/dev/null; then 239 systemd-tmpfiles --create ${sysconfdir}/tmpfiles.d/nscd.conf 240 elif [ -e ${sysconfdir}/init.d/populate-volatile.sh ]; then 241 ${sysconfdir}/init.d/populate-volatile.sh update 242 fi 243 fi 244} 245CONFFILES_nscd="${sysconfdir}/nscd.conf" 246 247SYSTEMD_PACKAGES = "nscd" 248SYSTEMD_SERVICE_nscd = "nscd.service" 249