1.. SPDX-License-Identifier: CC-BY-SA-2.0-UK 2 3******************* 4System Requirements 5******************* 6 7Welcome to the Yocto Project Reference Manual. This manual provides 8reference information for the current release of the Yocto Project, and 9is most effectively used after you have an understanding of the basics 10of the Yocto Project. The manual is neither meant to be read as a 11starting point to the Yocto Project, nor read from start to finish. 12Rather, use this manual to find variable definitions, class 13descriptions, and so forth as needed during the course of using the 14Yocto Project. 15 16For introductory information on the Yocto Project, see the 17:yocto_home:`Yocto Project Website <>` and the 18":ref:`overview-manual/development-environment:the yocto project development environment`" 19chapter in the Yocto Project Overview and Concepts Manual. 20 21If you want to use the Yocto Project to quickly build an image without 22having to understand concepts, work through the 23:doc:`/brief-yoctoprojectqs/index` document. You can find "how-to" 24information in the :doc:`/dev-manual/index`. You can find Yocto Project overview 25and conceptual information in the :doc:`/overview-manual/index`. 26 27.. note:: 28 29 For more information about the Yocto Project Documentation set, see 30 the :ref:`ref-manual/resources:links and related documentation` section. 31 32.. _detailed-supported-distros: 33 34Supported Linux Distributions 35============================= 36 37Currently, the Yocto Project is supported on the following 38distributions: 39 40- Ubuntu 16.04 (LTS) 41 42- Ubuntu 18.04 (LTS) 43 44- Ubuntu 20.04 (LTS) 45 46- Fedora 30 47 48- Fedora 31 49 50- Fedora 32 51 52- CentOS 7.x 53 54- CentOS 8.x 55 56- Debian GNU/Linux 8.x (Jessie) 57 58- Debian GNU/Linux 9.x (Stretch) 59 60- Debian GNU/Linux 10.x (Buster) 61 62- openSUSE Leap 15.1 63 64 65.. note:: 66 67 - While the Yocto Project Team attempts to ensure all Yocto Project 68 releases are one hundred percent compatible with each officially 69 supported Linux distribution, you may still encounter problems 70 that happen only with a specific distribution. 71 72 - Yocto Project releases are tested against the stable Linux 73 distributions in the above list. The Yocto Project should work 74 on other distributions but validation is not performed against 75 them. 76 77 - In particular, the Yocto Project does not support and currently 78 has no plans to support rolling-releases or development 79 distributions due to their constantly changing nature. We welcome 80 patches and bug reports, but keep in mind that our priority is on 81 the supported platforms listed below. 82 83 - You may use Windows Subsystem For Linux v2 to set up a build host 84 using Windows 10, but validation is not performed against build 85 hosts using WSLv2. 86 87 - The Yocto Project is not compatible with WSLv1, it is 88 compatible but not officially supported nor validated with 89 WSLv2, if you still decide to use WSL please upgrade to WSLv2. 90 91 - If you encounter problems, please go to :yocto_bugs:`Yocto Project 92 Bugzilla <>` and submit a bug. We are 93 interested in hearing about your experience. For information on 94 how to submit a bug, see the Yocto Project 95 :yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>` 96 and the ":ref:`dev-manual/common-tasks:submitting a defect against the yocto project`" 97 section in the Yocto Project Development Tasks Manual. 98 99 100Required Packages for the Build Host 101==================================== 102 103The list of packages you need on the host development system can be 104large when covering all build scenarios using the Yocto Project. This 105section describes required packages according to Linux distribution and 106function. 107 108.. _ubuntu-packages: 109 110Ubuntu and Debian 111----------------- 112 113Here are the required packages by function given a 114supported Ubuntu or Debian Linux distribution: 115 116.. note:: 117 118 - If your build system has the ``oss4-dev`` package installed, you 119 might experience QEMU build failures due to the package installing 120 its own custom ``/usr/include/linux/soundcard.h`` on the Debian 121 system. If you run into this situation, try either of these solutions:: 122 123 $ sudo apt-get build-dep qemu 124 $ sudo apt-get remove oss4-dev 125 126 - For Debian-8, ``python3-git`` and ``pylint3`` are no longer 127 available via ``apt-get``. 128 :: 129 130 $ sudo pip3 install GitPython pylint==1.9.5 131 132- *Essentials:* Packages needed to build an image on a headless system:: 133 134 $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; 135 136- *Documentation:* Packages needed if you are going to build out the 137 Yocto Project documentation manuals:: 138 139 $ sudo apt-get install make python3-pip 140 &PIP3_HOST_PACKAGES_DOC; 141 142 .. note:: 143 144 It is currently not possible to build out documentation from Debian 8 145 (Jessie) because of outdated ``pip3`` and ``python3``. ``python3-sphinx`` 146 is too outdated. 147 148Fedora Packages 149--------------- 150 151Here are the required packages by function given a 152supported Fedora Linux distribution: 153 154- *Essentials:* Packages needed to build an image for a headless 155 system:: 156 157 $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; 158 159- *Documentation:* Packages needed if you are going to build out the 160 Yocto Project documentation manuals:: 161 162 $ sudo dnf install make python3-pip which 163 &PIP3_HOST_PACKAGES_DOC; 164 165openSUSE Packages 166----------------- 167 168Here are the required packages by function given a 169supported openSUSE Linux distribution: 170 171- *Essentials:* Packages needed to build an image for a headless 172 system:: 173 174 $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; 175 176- *Documentation:* Packages needed if you are going to build out the 177 Yocto Project documentation manuals:: 178 179 $ sudo zypper install make python3-pip which 180 &PIP3_HOST_PACKAGES_DOC; 181 182 183CentOS-7 Packages 184----------------- 185 186Here are the required packages by function given a 187supported CentOS-7 Linux distribution: 188 189- *Essentials:* Packages needed to build an image for a headless 190 system:: 191 192 $ sudo yum install &CENTOS7_HOST_PACKAGES_ESSENTIAL; 193 194 .. note:: 195 196 - Extra Packages for Enterprise Linux (i.e. ``epel-release``) is 197 a collection of packages from Fedora built on RHEL/CentOS for 198 easy installation of packages not included in enterprise Linux 199 by default. You need to install these packages separately. 200 201 - The ``makecache`` command consumes additional Metadata from 202 ``epel-release``. 203 204- *Documentation:* Packages needed if you are going to build out the 205 Yocto Project documentation manuals:: 206 207 $ sudo yum install make python3-pip which 208 &PIP3_HOST_PACKAGES_DOC; 209 210CentOS-8 Packages 211----------------- 212 213Here are the required packages by function given a 214supported CentOS-8 Linux distribution: 215 216- *Essentials:* Packages needed to build an image for a headless 217 system:: 218 219 $ sudo dnf install &CENTOS8_HOST_PACKAGES_ESSENTIAL; 220 221 .. note:: 222 223 - Extra Packages for Enterprise Linux (i.e. ``epel-release``) is 224 a collection of packages from Fedora built on RHEL/CentOS for 225 easy installation of packages not included in enterprise Linux 226 by default. You need to install these packages separately. 227 228 - The ``PowerTools`` repo provides additional packages such as 229 ``rpcgen`` and ``texinfo``. 230 231 - The ``makecache`` command consumes additional Metadata from 232 ``epel-release``. 233 234- *Documentation:* Packages needed if you are going to build out the 235 Yocto Project documentation manuals:: 236 237 $ sudo dnf install make python3-pip which 238 &PIP3_HOST_PACKAGES_DOC; 239 240Required Git, tar, Python and gcc Versions 241========================================== 242 243In order to use the build system, your host development system must meet 244the following version requirements for Git, tar, and Python: 245 246- Git &MIN_GIT_VERSION; or greater 247 248- tar &MIN_TAR_VERSION; or greater 249 250- Python &MIN_PYTHON_VERSION; or greater 251 252If your host development system does not meet all these requirements, 253you can resolve this by installing a ``buildtools`` tarball that 254contains these tools. You can get the tarball one of two ways: download 255a pre-built tarball or use BitBake to build the tarball. 256 257In addition, your host development system must meet the following 258version requirement for gcc: 259 260- gcc &MIN_GCC_VERSION; or greater 261 262If your host development system does not meet this requirement, you can 263resolve this by installing a ``buildtools-extended`` tarball that 264contains additional tools, the equivalent of the Debian/Ubuntu ``build-essential`` 265package. 266 267In the sections that follow, three different methods will be described for 268installing the ``buildtools`` or ``buildtools-extended`` toolset. 269 270Installing a Pre-Built ``buildtools`` Tarball with ``install-buildtools`` script 271-------------------------------------------------------------------------------- 272 273The ``install-buildtools`` script is the easiest of the three methods by 274which you can get these tools. It downloads a pre-built buildtools 275installer and automatically installs the tools for you: 276 2771. Execute the ``install-buildtools`` script. Here is an example:: 278 279 $ cd poky 280 $ scripts/install-buildtools \ 281 --without-extended-buildtools \ 282 --base-url &YOCTO_DL_URL;/releases/yocto \ 283 --release yocto-&DISTRO; \ 284 --installer-version &DISTRO; 285 286 During execution, the buildtools tarball will be downloaded, the 287 checksum of the download will be verified, the installer will be run 288 for you, and some basic checks will be run to make sure the 289 installation is functional. 290 291 To avoid the need of ``sudo`` privileges, the ``install-buildtools`` 292 script will by default tell the installer to install in:: 293 294 /path/to/poky/buildtools 295 296 If your host development system needs the additional tools provided 297 in the ``buildtools-extended`` tarball, you can instead execute the 298 ``install-buildtools`` script with the default parameters:: 299 300 $ cd poky 301 $ scripts/install-buildtools 302 3032. Source the tools environment setup script by using a command like the 304 following:: 305 306 $ source /path/to/poky/buildtools/environment-setup-x86_64-pokysdk-linux 307 308 Of course, you need to supply your installation directory and be sure to 309 use the right file (i.e. i586 or x86_64). 310 311 After you have sourced the setup script, the tools are added to 312 ``PATH`` and any other environment variables required to run the 313 tools are initialized. The results are working versions versions of 314 Git, tar, Python and ``chrpath``. And in the case of the 315 ``buildtools-extended`` tarball, additional working versions of tools 316 including ``gcc``, ``make`` and the other tools included in 317 ``packagegroup-core-buildessential``. 318 319Downloading a Pre-Built ``buildtools`` Tarball 320---------------------------------------------- 321 322If you would prefer not to use the ``install-buildtools`` script, you can instead 323download and run a pre-built buildtools installer yourself with the following 324steps: 325 3261. Locate and download the ``*.sh`` at &YOCTO_RELEASE_DL_URL;/buildtools/ 327 3282. Execute the installation script. Here is an example for the 329 traditional installer:: 330 331 $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh 332 333 Here is an example for the extended installer:: 334 335 $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh 336 337 During execution, a prompt appears that allows you to choose the 338 installation directory. For example, you could choose the following: 339 ``/home/your-username/buildtools`` 340 3413. Source the tools environment setup script by using a command like the 342 following:: 343 344 $ source /home/your_username/buildtools/environment-setup-i586-poky-linux 345 346 Of 347 course, you need to supply your installation directory and be sure to 348 use the right file (i.e. i585 or x86-64). 349 350 After you have sourced the setup script, the tools are added to 351 ``PATH`` and any other environment variables required to run the 352 tools are initialized. The results are working versions versions of 353 Git, tar, Python and ``chrpath``. And in the case of the 354 ``buildtools-extended`` tarball, additional working versions of tools 355 including ``gcc``, ``make`` and the other tools included in 356 ``packagegroup-core-buildessential``. 357 358Building Your Own ``buildtools`` Tarball 359---------------------------------------- 360 361Building and running your own buildtools installer applies only when you 362have a build host that can already run BitBake. In this case, you use 363that machine to build the ``.sh`` file and then take steps to transfer 364and run it on a machine that does not meet the minimal Git, tar, and 365Python (or gcc) requirements. 366 367Here are the steps to take to build and run your own buildtools 368installer: 369 3701. On the machine that is able to run BitBake, be sure you have set up 371 your build environment with the setup script 372 (:ref:`structure-core-script`). 373 3742. Run the BitBake command to build the tarball:: 375 376 $ bitbake buildtools-tarball 377 378 or run the BitBake command to build the extended tarball:: 379 380 $ bitbake buildtools-extended-tarball 381 382 .. note:: 383 384 The :term:`SDKMACHINE` variable in your ``local.conf`` file determines 385 whether you build tools for a 32-bit or 64-bit system. 386 387 Once the build completes, you can find the ``.sh`` file that installs 388 the tools in the ``tmp/deploy/sdk`` subdirectory of the 389 :term:`Build Directory`. The installer file has the string 390 "buildtools" (or "buildtools-extended") in the name. 391 3923. Transfer the ``.sh`` file from the build host to the machine that 393 does not meet the Git, tar, or Python (or gcc) requirements. 394 3954. On the machine that does not meet the requirements, run the ``.sh`` 396 file to install the tools. Here is an example for the traditional 397 installer:: 398 399 $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh 400 401 Here is an example for the extended installer:: 402 403 $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh 404 405 During execution, a prompt appears that allows you to choose the 406 installation directory. For example, you could choose the following: 407 ``/home/your_username/buildtools`` 408 4095. Source the tools environment setup script by using a command like the 410 following:: 411 412 $ source /home/your_username/buildtools/environment-setup-x86_64-poky-linux 413 414 Of course, you need to supply your installation directory and be sure to 415 use the right file (i.e. i586 or x86_64). 416 417 After you have sourced the setup script, the tools are added to 418 ``PATH`` and any other environment variables required to run the 419 tools are initialized. The results are working versions versions of 420 Git, tar, Python and ``chrpath``. And in the case of the 421 ``buildtools-extended`` tarball, additional working versions of tools 422 including ``gcc``, ``make`` and the other tools included in 423 ``packagegroup-core-buildessential``. 424