1.. SPDX-License-Identifier: CC-BY-SA-2.0-UK 2 3******************* 4System Requirements 5******************* 6 7Welcome to the Yocto Project Reference Manual. This manual provides 8reference information for the current release of the Yocto Project, and 9is most effectively used after you have an understanding of the basics 10of the Yocto Project. The manual is neither meant to be read as a 11starting point to the Yocto Project, nor read from start to finish. 12Rather, use this manual to find variable definitions, class 13descriptions, and so forth as needed during the course of using the 14Yocto Project. 15 16For introductory information on the Yocto Project, see the 17:yocto_home:`Yocto Project Website <>` and the 18":ref:`overview-manual/development-environment:the yocto project development environment`" 19chapter in the Yocto Project Overview and Concepts Manual. 20 21If you want to use the Yocto Project to quickly build an image without 22having to understand concepts, work through the 23:doc:`/brief-yoctoprojectqs/index` document. You can find "how-to" 24information in the :doc:`/dev-manual/index`. You can find Yocto Project overview 25and conceptual information in the :doc:`/overview-manual/index`. 26 27.. note:: 28 29 For more information about the Yocto Project Documentation set, see 30 the :ref:`ref-manual/resources:links and related documentation` section. 31 32.. _detailed-supported-distros: 33 34Supported Linux Distributions 35============================= 36 37Currently, the Yocto Project is supported on the following 38distributions: 39 40- Ubuntu 18.04 (LTS) 41 42- Ubuntu 20.04 (LTS) 43 44- Fedora 33 45 46- Fedora 34 47 48- CentOS 7.x 49 50- CentOS 8.x 51 52- Debian GNU/Linux 8.x (Jessie) 53 54- Debian GNU/Linux 9.x (Stretch) 55 56- Debian GNU/Linux 10.x (Buster) 57 58- Debian GNU/Linux 11.x (Bullseye) 59 60- OpenSUSE Leap 15.1 61 62- OpenSUSE Leap 15.2 63 64.. note:: 65 66 - While the Yocto Project Team attempts to ensure all Yocto Project 67 releases are one hundred percent compatible with each officially 68 supported Linux distribution, you may still encounter problems 69 that happen only with a specific distribution. 70 71 - Yocto Project releases are tested against the stable Linux 72 distributions in the above list. The Yocto Project should work 73 on other distributions but validation is not performed against 74 them. 75 76 - In particular, the Yocto Project does not support and currently 77 has no plans to support rolling-releases or development 78 distributions due to their constantly changing nature. We welcome 79 patches and bug reports, but keep in mind that our priority is on 80 the supported platforms listed below. 81 82 - You may use Windows Subsystem For Linux v2 to set up a build host 83 using Windows 10, but validation is not performed against build 84 hosts using WSLv2. 85 86 - The Yocto Project is not compatible with WSLv1, it is 87 compatible but not officially supported nor validated with 88 WSLv2, if you still decide to use WSL please upgrade to WSLv2. 89 90 - If you encounter problems, please go to :yocto_bugs:`Yocto Project 91 Bugzilla <>` and submit a bug. We are 92 interested in hearing about your experience. For information on 93 how to submit a bug, see the Yocto Project 94 :yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>` 95 and the ":ref:`dev-manual/common-tasks:submitting a defect against the yocto project`" 96 section in the Yocto Project Development Tasks Manual. 97 98 99Required Packages for the Build Host 100==================================== 101 102The list of packages you need on the host development system can be 103large when covering all build scenarios using the Yocto Project. This 104section describes required packages according to Linux distribution and 105function. 106 107.. _ubuntu-packages: 108 109Ubuntu and Debian 110----------------- 111 112Here are the required packages by function given a 113supported Ubuntu or Debian Linux distribution: 114 115.. note:: 116 117 - If your build system has the ``oss4-dev`` package installed, you 118 might experience QEMU build failures due to the package installing 119 its own custom ``/usr/include/linux/soundcard.h`` on the Debian 120 system. If you run into this situation, try either of these solutions:: 121 122 $ sudo apt build-dep qemu 123 $ sudo apt remove oss4-dev 124 125 - For Debian-8, ``python3-git`` and ``pylint3`` are no longer 126 available via ``apt``. 127 :: 128 129 $ sudo pip3 install GitPython pylint==1.9.5 130 131- *Essentials:* Packages needed to build an image on a headless system:: 132 133 $ sudo apt install &UBUNTU_HOST_PACKAGES_ESSENTIAL; 134 135- *Documentation:* Packages needed if you are going to build out the 136 Yocto Project documentation manuals:: 137 138 $ sudo apt install make python3-pip 139 &PIP3_HOST_PACKAGES_DOC; 140 141 .. note:: 142 143 It is currently not possible to build out documentation from Debian 8 144 (Jessie) because of outdated ``pip3`` and ``python3``. ``python3-sphinx`` 145 is too outdated. 146 147Fedora Packages 148--------------- 149 150Here are the required packages by function given a 151supported Fedora Linux distribution: 152 153- *Essentials:* Packages needed to build an image for a headless 154 system:: 155 156 $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; 157 158- *Documentation:* Packages needed if you are going to build out the 159 Yocto Project documentation manuals:: 160 161 $ sudo dnf install make python3-pip which 162 &PIP3_HOST_PACKAGES_DOC; 163 164openSUSE Packages 165----------------- 166 167Here are the required packages by function given a 168supported openSUSE Linux distribution: 169 170- *Essentials:* Packages needed to build an image for a headless 171 system:: 172 173 $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; 174 175- *Documentation:* Packages needed if you are going to build out the 176 Yocto Project documentation manuals:: 177 178 $ sudo zypper install make python3-pip which 179 &PIP3_HOST_PACKAGES_DOC; 180 181 182CentOS-7 Packages 183----------------- 184 185Here are the required packages by function given a 186supported CentOS-7 Linux distribution: 187 188- *Essentials:* Packages needed to build an image for a headless 189 system:: 190 191 $ sudo yum install &CENTOS7_HOST_PACKAGES_ESSENTIAL; 192 193 .. note:: 194 195 - Extra Packages for Enterprise Linux (i.e. ``epel-release``) is 196 a collection of packages from Fedora built on RHEL/CentOS for 197 easy installation of packages not included in enterprise Linux 198 by default. You need to install these packages separately. 199 200 - The ``makecache`` command consumes additional Metadata from 201 ``epel-release``. 202 203- *Documentation:* Packages needed if you are going to build out the 204 Yocto Project documentation manuals:: 205 206 $ sudo yum install make python3-pip which 207 &PIP3_HOST_PACKAGES_DOC; 208 209CentOS-8 Packages 210----------------- 211 212Here are the required packages by function given a 213supported CentOS-8 Linux distribution: 214 215- *Essentials:* Packages needed to build an image for a headless 216 system:: 217 218 $ sudo dnf install &CENTOS8_HOST_PACKAGES_ESSENTIAL; 219 220 .. note:: 221 222 - Extra Packages for Enterprise Linux (i.e. ``epel-release``) is 223 a collection of packages from Fedora built on RHEL/CentOS for 224 easy installation of packages not included in enterprise Linux 225 by default. You need to install these packages separately. 226 227 - The ``PowerTools`` repo provides additional packages such as 228 ``rpcgen`` and ``texinfo``. 229 230 - The ``makecache`` command consumes additional Metadata from 231 ``epel-release``. 232 233- *Documentation:* Packages needed if you are going to build out the 234 Yocto Project documentation manuals:: 235 236 $ sudo dnf install make python3-pip which 237 &PIP3_HOST_PACKAGES_DOC; 238 239Required Git, tar, Python and gcc Versions 240========================================== 241 242In order to use the build system, your host development system must meet 243the following version requirements for Git, tar, and Python: 244 245- Git &MIN_GIT_VERSION; or greater 246 247- tar &MIN_TAR_VERSION; or greater 248 249- Python &MIN_PYTHON_VERSION; or greater 250 251If your host development system does not meet all these requirements, 252you can resolve this by installing a ``buildtools`` tarball that 253contains these tools. You can get the tarball one of two ways: download 254a pre-built tarball or use BitBake to build the tarball. 255 256In addition, your host development system must meet the following 257version requirement for gcc: 258 259- gcc &MIN_GCC_VERSION; or greater 260 261If your host development system does not meet this requirement, you can 262resolve this by installing a ``buildtools-extended`` tarball that 263contains additional tools, the equivalent of the Debian/Ubuntu ``build-essential`` 264package. 265 266In the sections that follow, three different methods will be described for 267installing the ``buildtools`` or ``buildtools-extended`` toolset. 268 269Installing a Pre-Built ``buildtools`` Tarball with ``install-buildtools`` script 270-------------------------------------------------------------------------------- 271 272The ``install-buildtools`` script is the easiest of the three methods by 273which you can get these tools. It downloads a pre-built buildtools 274installer and automatically installs the tools for you: 275 2761. Execute the ``install-buildtools`` script. Here is an example:: 277 278 $ cd poky 279 $ scripts/install-buildtools \ 280 --without-extended-buildtools \ 281 --base-url &YOCTO_DL_URL;/releases/yocto \ 282 --release yocto-&DISTRO; \ 283 --installer-version &DISTRO; 284 285 During execution, the buildtools tarball will be downloaded, the 286 checksum of the download will be verified, the installer will be run 287 for you, and some basic checks will be run to make sure the 288 installation is functional. 289 290 To avoid the need of ``sudo`` privileges, the ``install-buildtools`` 291 script will by default tell the installer to install in:: 292 293 /path/to/poky/buildtools 294 295 If your host development system needs the additional tools provided 296 in the ``buildtools-extended`` tarball, you can instead execute the 297 ``install-buildtools`` script with the default parameters:: 298 299 $ cd poky 300 $ scripts/install-buildtools 301 3022. Source the tools environment setup script by using a command like the 303 following:: 304 305 $ source /path/to/poky/buildtools/environment-setup-x86_64-pokysdk-linux 306 307 Of course, you need to supply your installation directory and be sure to 308 use the right file (i.e. i586 or x86_64). 309 310 After you have sourced the setup script, the tools are added to 311 ``PATH`` and any other environment variables required to run the 312 tools are initialized. The results are working versions versions of 313 Git, tar, Python and ``chrpath``. And in the case of the 314 ``buildtools-extended`` tarball, additional working versions of tools 315 including ``gcc``, ``make`` and the other tools included in 316 ``packagegroup-core-buildessential``. 317 318Downloading a Pre-Built ``buildtools`` Tarball 319---------------------------------------------- 320 321If you would prefer not to use the ``install-buildtools`` script, you can instead 322download and run a pre-built buildtools installer yourself with the following 323steps: 324 3251. Locate and download the ``*.sh`` at :yocto_dl:`/releases/yocto/yocto-&DISTRO;/buildtools/` 326 3272. Execute the installation script. Here is an example for the 328 traditional installer:: 329 330 $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh 331 332 Here is an example for the extended installer:: 333 334 $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh 335 336 During execution, a prompt appears that allows you to choose the 337 installation directory. For example, you could choose the following: 338 ``/home/your-username/buildtools`` 339 3403. Source the tools environment setup script by using a command like the 341 following:: 342 343 $ source /home/your_username/buildtools/environment-setup-i586-poky-linux 344 345 Of 346 course, you need to supply your installation directory and be sure to 347 use the right file (i.e. i585 or x86-64). 348 349 After you have sourced the setup script, the tools are added to 350 ``PATH`` and any other environment variables required to run the 351 tools are initialized. The results are working versions versions of 352 Git, tar, Python and ``chrpath``. And in the case of the 353 ``buildtools-extended`` tarball, additional working versions of tools 354 including ``gcc``, ``make`` and the other tools included in 355 ``packagegroup-core-buildessential``. 356 357Building Your Own ``buildtools`` Tarball 358---------------------------------------- 359 360Building and running your own buildtools installer applies only when you 361have a build host that can already run BitBake. In this case, you use 362that machine to build the ``.sh`` file and then take steps to transfer 363and run it on a machine that does not meet the minimal Git, tar, and 364Python (or gcc) requirements. 365 366Here are the steps to take to build and run your own buildtools 367installer: 368 3691. On the machine that is able to run BitBake, be sure you have set up 370 your build environment with the setup script 371 (:ref:`structure-core-script`). 372 3732. Run the BitBake command to build the tarball:: 374 375 $ bitbake buildtools-tarball 376 377 or run the BitBake command to build the extended tarball:: 378 379 $ bitbake buildtools-extended-tarball 380 381 .. note:: 382 383 The :term:`SDKMACHINE` variable in your ``local.conf`` file determines 384 whether you build tools for a 32-bit or 64-bit system. 385 386 Once the build completes, you can find the ``.sh`` file that installs 387 the tools in the ``tmp/deploy/sdk`` subdirectory of the 388 :term:`Build Directory`. The installer file has the string 389 "buildtools" (or "buildtools-extended") in the name. 390 3913. Transfer the ``.sh`` file from the build host to the machine that 392 does not meet the Git, tar, or Python (or gcc) requirements. 393 3944. On the machine that does not meet the requirements, run the ``.sh`` 395 file to install the tools. Here is an example for the traditional 396 installer:: 397 398 $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh 399 400 Here is an example for the extended installer:: 401 402 $ sh ~/Downloads/x86_64-buildtools-extended-nativesdk-standalone-&DISTRO;.sh 403 404 During execution, a prompt appears that allows you to choose the 405 installation directory. For example, you could choose the following: 406 ``/home/your_username/buildtools`` 407 4085. Source the tools environment setup script by using a command like the 409 following:: 410 411 $ source /home/your_username/buildtools/environment-setup-x86_64-poky-linux 412 413 Of course, you need to supply your installation directory and be sure to 414 use the right file (i.e. i586 or x86_64). 415 416 After you have sourced the setup script, the tools are added to 417 ``PATH`` and any other environment variables required to run the 418 tools are initialized. The results are working versions versions of 419 Git, tar, Python and ``chrpath``. And in the case of the 420 ``buildtools-extended`` tarball, additional working versions of tools 421 including ``gcc``, ``make`` and the other tools included in 422 ``packagegroup-core-buildessential``. 423