1DESCRIPTION = "Linux Kernel for Raspberry Pi"
2SECTION = "kernel"
3LICENSE = "GPLv2"
4LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
5
6COMPATIBLE_MACHINE = "^rpi$"
7
8PE = "1"
9PV = "${LINUX_VERSION}+git${SRCPV}"
10
11inherit kernel siteinfo
12require recipes-kernel/linux/linux-yocto.inc
13
14SRC_URI += "file://rpi-kernel-misc.cfg"
15
16KCONFIG_MODE = "--alldefconfig"
17KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
18KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
19KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
20KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
21KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
22
23# CMDLINE for raspberrypi
24SERIAL = "${@oe.utils.conditional("ENABLE_UART", "1", "console=serial0,115200", "", d)}"
25CMDLINE ?= "dwc_otg.lpm_enable=0 ${SERIAL} root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
26
27# Add the kernel debugger over console kernel command line option if enabled
28CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
29
30# Disable rpi logo on boot
31CMDLINE_append += ' ${@oe.utils.conditional("DISABLE_RPI_BOOT_LOGO", "1", "logo.nologo", "", d)}'
32
33# You can define CMDLINE_DEBUG as "debug" in your local.conf or distro.conf
34# to enable kernel debugging.
35CMDLINE_DEBUG ?= ""
36CMDLINE_append = " ${CMDLINE_DEBUG}"
37
38KERNEL_INITRAMFS ?= '${@oe.utils.conditional("INITRAMFS_IMAGE_BUNDLE", "1", "1", "", d)}'
39
40KERNEL_MODULE_AUTOLOAD += "${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "stmpe-ts", "", d)}"
41
42# A LOADADDR is needed when building a uImage format kernel. This value is not
43# set by default in rpi-4.8.y and later branches so we need to provide it
44# manually. This value unused if KERNEL_IMAGETYPE is not uImage.
45KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"
46
47# Set a variable in .configure
48# $1 - Configure variable to be set
49# $2 - value [n/y/value]
50kernel_configure_variable() {
51    # Remove the config
52    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
53    if test "$2" = "n"
54    then
55        echo "# CONFIG_$1 is not set" >> ${B}/.config
56    else
57        echo "CONFIG_$1=$2" >> ${B}/.config
58    fi
59}
60
61config_setup() {
62    # From kernel.bbclass. Unfortunately, this is needed to support builds that
63    # use devtool. The reason is as follows:
64    #
65    # - In devtool builds, externalsrc.bbclass gets inherited and sets a list of
66    # SRCTREECOVEREDTASKS, which don't get run because they affect the source
67    # tree and, when using devtool, we want the developer's changes to be the
68    # single source of truth. kernel-yocto.bbclass adds do_kernel_configme to
69    # SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
70    # non-devtool build, do_kernel_configme creates ${B}.config.
71    #
72    # - Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
73    # doesn't run, because the first few lines of do_configure in kernel.bbclass
74    # populate ${B}.config from either ${S}.config (if it exists) for custom
75    # developer changes, or otherwise from ${WORDIR}/defconfig.
76    #
77    # - In linux-raspberrypi, we add do_configure_prepend, which tweaks
78    # ${B}.config. Since this runs *before* the kernel.bbclass do_configure,
79    # ${B}.config doesn't yet exist and we hit an error. Thus we need to move
80    # the logic from do_configure up to before our do_configure_prepend. Because
81    # we are copying only a portion of do_configure and not the whole thing,
82    # there is no clean way to do it using OE functionality, so we just
83    # copy-and-paste.
84    if [ "${S}" != "${B}" ] && [ -f "${S}/.config" ] && [ ! -f "${B}/.config" ]; then
85        mv "${S}/.config" "${B}/.config"
86    fi
87
88    # Copy defconfig to .config if .config does not exist. This allows
89    # recipes to manage the .config themselves in do_configure_prepend().
90    if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
91        cp "${WORKDIR}/defconfig" "${B}/.config"
92    fi
93}
94
95do_configure_prepend() {
96    config_setup
97
98    mv -f ${B}/.config ${B}/.config.patched
99    CONF_SED_SCRIPT=""
100
101    # Localversion
102    kernel_configure_variable LOCALVERSION "\"\""
103
104    if [ ! -z "${KERNEL_INITRAMFS}" ]; then
105        kernel_configure_variable OVERLAY_FS y
106        kernel_configure_variable SQUASHFS y
107        kernel_configure_variable UBIFS_FS y
108    fi
109
110    # Activate the configuration options for VC4
111    VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
112    if [ ${VC4GRAPHICS} = "1" ]; then
113        kernel_configure_variable I2C_BCM2835 y
114        kernel_configure_variable DRM y
115        kernel_configure_variable DRM_FBDEV_EMULATION y
116        kernel_configure_variable DRM_VC4 y
117    fi
118
119    # Keep this the last line
120    # Remove all modified configs and add the rest to .config
121    sed -e "${CONF_SED_SCRIPT}" < '${B}/.config.patched' >> '${B}/.config'
122    rm -f ${B}/.config.patched
123}
124
125do_compile_append_raspberrypi3-64() {
126    cc_extra=$(get_cc_option)
127    oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
128}
129
130do_deploy_append() {
131    # Deploy cmdline.txt
132    install -d ${DEPLOYDIR}/bcm2835-bootfiles
133    PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
134    if [ ${PITFT} = "1" ]; then
135        PITFT_PARAMS="fbcon=map:10 fbcon=font:VGA8x8"
136    fi
137    echo "${CMDLINE}${PITFT_PARAMS}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt
138}
139