1# Configuration file for fw_(printenv/setenv) utility.
2# Up to two entries are valid, in this case the redundant
3# environment sector is assumed present.
4# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
5# Futhermore, if the Flash sector size is ommitted, this value is assumed to
6# be the same as the Environment size, which is valid for NOR and SPI-dataflash
7
8# NOR example
9# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
10/dev/mtd2		0x0000		0x40000		0x4000
11
12# MTD SPI-dataflash example
13# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
14#/dev/mtd5		0x4200		0x4200
15#/dev/mtd6		0x4200		0x4200
16
17# NAND example
18#/dev/mtd0		0x4000		0x4000		0x20000			2
19
20# Block device example
21#/dev/mmcblk0		0xc0000		0x20000
22
23# VFAT example
24#/boot/uboot.env	0x0000          0x4000
25