1# Configuration file for fw_(printenv/setenv) utility.
2# Up to two entries are valid, in this case the redundant
3# environment sector is assumed present.
4# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash.
5# Furthermore, if the Flash sector size is omitted, this value is assumed to
6# be the same as the Environment size, which is valid for NOR and SPI-dataflash
7
8# NOR example
9# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
10#/dev/mtd1		0x0000		0x20000		0x20000
11#/dev/mtd2		0x0000		0x4000		0x4000
12
13# MTD SPI-dataflash example
14# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
15#/dev/mtd2		0x00000		0x20000
16/dev/mtd/u-boot-env	0x00000		0x10000
17/dev/mtd/u-boot-env	0x10000		0x10000
18#/dev/mtd5		0x4200		0x4200
19#/dev/mtd6		0x4200		0x4200
20
21# NAND example
22#/dev/mtd0		0x4000		0x4000		0x20000			2
23
24# Block device example
25#/dev/mmcblk0		0xc0000		0x20000
26