1# https://github.com/openbmc/openbmc/issues/1142 2-e Check_BMC_Name_Property_Is_Set 3-e Check_BMC_Clocks_Name_Property_Is_Set 4-e Check_BMC_Clocks_Compatible_Property_Is_Set 5-e Check_BMC_FSI_Compatible_Property_Is_Set 6-e Check_BMC_FSI_Name_Property_Is_Set 7# https://github.com/openbmc/openbmc-test-automation/issues/822 8-e Verify_Minimal_Memory_Buffer_Inventory 9-e Verify_Minimal_Main_Planar_Inventory 10-e Verify_Minimal_System_Inventory 11# NA test case for Witherspoon 12-e io_board_Present 13-e io_board_Fault 14-e Certificate_Test 15# System LED test cases which are NA for Witherspoon system. 16-e Test_Heartbeat_LED_And_Verify_Via_REST 17-e Test_Beep_LED_And_Verify_Via_REST 18-e Test_Identify_LED_And_Verify_Via_REST 19# NXDMAENG UE error injection is not available in latest p9dd1ffdcv104.xlsm 20-e Verify_Unrecoverable_Callout_Handling_For_NXDMAENG 21# NA test case with nginx support. 22-e Test_Non_SSL_Connection_To_Port_80 23-e Test_Non_SSL_Connection_To_Port_443 24# https://github.com/openbmc/openbmc-test-automation/issues/1411 25-e Check_BMC_Memory_Name_Property_Is_Set 26-e Check_BMC_Memory_Device_Type_Property_Is_Set 27# MRW changes required for this to work. 28-e Test_GPU_SDR_Info_At_Power_On 29# Core dump is disabled. 30-e Verify_Core_Dump_Size 31# Skip org code update. 32-e Initiate_Code_Update_BMC 33-e BIOS_Code_Update 34-e Upload_Test 35-e BMC_Code_Update 36-e Host_Code_Update 37-e BMC_Update_Recoverable_Error 38-e Host_Update_Recoverable_Error 39-e BMC_Multi_Code_Update 40-e Host_Multi_Code_Update 41-e Enable_Field_Mode 42-e Attempt_To_Disable_Field_Mode_Via_REST 43-e Verify_IPMI_Disable_Policy_Post_BMC_Code_Update 44# Others NA tests. 45-e Run_Keyword_Pgm 46# Factory reset must not run in CT. 47-e Factory_Reset 48-e Full_Suite_Regression 49-e AC_Cycles 50-e Network_Nping 51# Multiple runs only needed for stability. 52-e Run_Multiple_Power_Cycle 53-e Run_Multiple_BMC_Reset_Via_REST 54-e Run_Multiple_BMC_Reset_Via_Reboot 55-e General_boot_testing 56-e SLP_Service_Test 57-e Check_Network_Latency 58# TODO: Configure invalid IP address use cases. 59-e Configure_Broadcast_IP 60-e Configure_Multicast_IP 61-e Configure_Loopback_IP 62-e Configure_Network_ID 63# TODO: Invalid gateway address configuration. 64-e Configure_Broadcast_IP_For_Gateway 65-e Configure_Loopback_IP_For_Gateway 66-e Configure_Multicast_IP_For_Gateway 67-e Configure_Network_ID_For_Gateway 68-e Verify_Network_Interface_Recovery 69# Skipping RAS test cases 70-e Host_RAS 71# Skip multi threading test cuasing XML parser failure. 72-e Stress_BMC_REST_Server 73-e Stress_BMC_SSH_Server 74-e Stress_BMC_IPMI_Server 75# Applicable only for master build. 76-e Verify_eSEL_Description_And_EntryID_Using_REST 77# Needs fix and improvement. 78-e Test_SBE_Side_Switch 79