1# https://github.com/openbmc/openbmc/issues/1142 2-e Check_BMC_Name_Property_Is_Set 3-e Check_BMC_Clocks_Name_Property_Is_Set 4-e Check_BMC_Clocks_Compatible_Property_Is_Set 5-e Check_BMC_FSI_Compatible_Property_Is_Set 6-e Check_BMC_FSI_Name_Property_Is_Set 7# https://github.com/openbmc/openbmc-test-automation/issues/822 8-e Verify_Minimal_Memory_Buffer_Inventory 9-e Verify_Minimal_Main_Planar_Inventory 10-e Verify_Minimal_System_Inventory 11# NA test case for Witherspoon 12-e io_board_Present 13-e io_board_Fault 14# System LED test cases which are NA for Witherspoon system. 15-e Test_Heartbeat_LED_And_Verify_Via_REST 16-e Test_Beep_LED_And_Verify_Via_REST 17-e Test_Identify_LED_And_Verify_Via_REST 18# NXDMAENG UE error injection is not available in latest p9dd1ffdcv104.xlsm 19-e Verify_Unrecoverable_Callout_Handling_For_NXDMAENG 20# NA test case with nginx support. 21-e Test_Non_SSL_Connection_To_Port_80 22-e Test_Non_SSL_Connection_To_Port_443 23# https://github.com/openbmc/openbmc-test-automation/issues/1411 24-e Check_BMC_Memory_Name_Property_Is_Set 25-e Check_BMC_Memory_Device_Type_Property_Is_Set 26# MRW changes required for this to work. 27-e Test_GPU_SDR_Info_At_Power_On 28# Core dump is disabled. 29-e Verify_Core_Dump_Size 30# Skip org code update. 31-e Initiate_Code_Update_BMC 32-e BIOS_Code_Update 33-e Upload_Test 34-e BMC_Code_Update 35-e Host_Code_Update 36-e BMC_Update_Recoverable_Error 37-e Host_Update_Recoverable_Error 38-e BMC_Multi_Code_Update 39-e Host_Multi_Code_Update 40-e Verify_IPMI_Disable_Policy_Post_BMC_Code_Update 41# Others NA tests. 42-e Run_Keyword_Pgm 43# Factory reset must not run in CT. 44-e Factory_Reset 45-e Full_Suite_Regression 46-e AC_Cycles 47-e Network_Nping 48# Multiple runs only needed for stability. 49-e Run_Multiple_Power_Cycle 50-e Run_Multiple_BMC_Reset_Via_REST 51-e Run_Multiple_BMC_Reset_Via_Reboot 52-e General_boot_testing 53-e SLP_Service_Test 54-e Check_Network_Latency 55# TODO: Configure invalid IP address use cases. 56-e Configure_Broadcast_IP 57-e Configure_Multicast_IP 58-e Configure_Loopback_IP 59-e Configure_Network_ID 60# TODO: Invalid gateway address configuration. 61-e Configure_Broadcast_IP_For_Gateway 62-e Configure_Loopback_IP_For_Gateway 63-e Configure_Multicast_IP_For_Gateway 64-e Configure_Network_ID_For_Gateway 65-e Verify_Network_Interface_Recovery 66# Skipping RAS test cases 67-e Host_RAS 68# Skip multi threading test cuasing XML parser failure. 69-e Stress_BMC_REST_Server 70-e Stress_BMC_SSH_Server 71-e Stress_BMC_IPMI_Server 72# Applicable only for master build. 73-e Verify_eSEL_Description_And_EntryID_Using_REST 74# Needs fix and improvement. 75-e Test_SBE_Side_Switch 76# IPMI disable and enable use cases. 77-e Verify_Disabling_And_Enabling_IPMI_Via_Host 78-e Verify_Disabling_IPMI_Via_OOB_IPMI 79-e Verify_IPMI_Disable_Persistency_After_BMC_Reboot 80