1*** Settings ***
2Documentation  Make a general hardware stress in a partition with all the
3...  resources available.
4
5# Test Parameters:
6# TYPE                EEH error function to use, default is 4.
7# OPENBMC_HOST        The BMC host name or IP address.
8# OS_HOST             The OS host name or IP Address.
9# OS_USERNAME         The OS login userid (usually root).
10# OS_PASSWORD         The password for the OS login.
11# HTX_DURATION        Duration of HTX run (e.g. "24 hours", "8 hours").
12# HTX_INTERVAL        The time delay between consecutive checks of HTX
13#                     status, for example, 30 minutes.
14#                     In summary: Run HTX for $HTX_DURATION, checking
15#                     every $HTX_INTERVAL.
16# HTX_MDT_PROFILE     MDT profile to be executed (e.g. "mdt.bu, net.mdt, etc")
17#                     default is "mdt.bu".
18# bootme_period       Bootme period where the system will be rebooting. (e.g.
19#                     "3") 3 = 1 hour period.
20
21# Expected result:
22# HTX runs mdt.bu and doesn't log errors during the acceptance execution.
23
24# Glossary:
25# MDT:
26#   Master device table is a collection of hardware devices on the system for
27#   which HTX exercisers can be run.
28# build_net:
29#   Script that configures every network port when connected to a loop. This
30#   skips the communication port to always keep it available.
31# mdt.bu:
32#   Default mdt file. Collection of all HTX exercisers. Aim is to test entire
33#   system concurrently.
34# HTX error log file /tmp/htxerr
35#   Records all the errors that occur. If there's no error during the test, it
36#   should be empty.
37# bootme:
38#   This configures the cron to reboot the system and re-run the HTX profile.
39
40Library         SSHLibrary
41Library         String
42Library         ../lib/bmc_ssh_utils.py
43Resource        ../lib/resource.robot
44Resource        ../syslib/utils_os.robot
45Resource        ../lib/bmc_network_utils.robot
46Resource        ../lib/bmc_redfish_resource.robot
47
48Suite Setup     Suite Setup Execution
49Suite Teardown  Collect HTX Log Files
50Test Teardown   FFDC On Test Case Fail
51
52*** Variables ***
53
54${HTX_DURATION}     8 hours
55${HTX_INTERVAL}     35 minutes
56${HTX_MDT_PROFILE}  mdt.bu
57${bootme_period}    3
58
59*** Test Cases ***
60
61Test Acceptance Boot
62    [Documentation]  Stress every controller connected via PCI in an OS with
63    ...  every resource available (CPU, RAM, storage, ethernet controllers,
64    ...  etc).
65    [Tags]  Test_Acceptance_Boot
66
67    Run Build Net
68    Run MDT Profile  ${HTX_MDT_PROFILE}
69    Run Soft Bootme
70    Repeat Keyword  ${HTX_DURATION}  Run Keywords
71    ...  Wait Until Keyword Succeeds  15 min  30 sec  Is OS Booted
72    ...  AND
73    ...  OS Execute Command  uptime
74    ...  AND
75    ...  Run Key U  sleep \ ${HTX_INTERVAL}
76    ...  AND
77    ...  Check HTX Run Status
78    ...  AND
79    ...  Wait Until Keyword Succeeds  20 min  10 sec  Is Host Off
80    Wait Until Keyword Succeeds  15 min  15 sec  Is OS Booted
81    Shutdown Bootme
82    Shutdown HTX Exerciser
83
84*** Keywords ***
85Suite Setup Execution
86    [Documentation]  Do setup tasks.
87
88    Redfish Power On  stack_mode=normal
89    Tool Exist  htxcmdline
90    Create Default MDT Profile
91