1*** Settings *** 2Documentation Network interface configuration and verification 3 ... tests. 4 5Resource ../../lib/bmc_redfish_resource.robot 6Resource ../../lib/bmc_network_utils.robot 7Resource ../../lib/openbmc_ffdc.robot 8Library ../../lib/bmc_network_utils.py 9Library Collections 10 11Test Setup Test Setup Execution 12Test Teardown Test Teardown Execution 13Suite Setup Suite Setup Execution 14 15Force Tags Network_Conf_Test 16 17*** Variables *** 18${test_hostname} openbmc 19${test_ipv4_addr} 10.7.7.7 20${test_ipv4_invalid_addr} 0.0.1.a 21${test_subnet_mask} 255.255.0.0 22${broadcast_ip} 10.7.7.255 23${loopback_ip} 127.0.0.2 24${multicast_ip} 224.6.6.6 25${out_of_range_ip} 10.7.7.256 26${test_ipv4_addr2} 10.7.7.8 27 28# Valid netmask is 4 bytes long and has continuous block of 1s. 29# Maximum valid value in each octet is 255 and least value is 0. 30# 253 is not valid, as binary value is 11111101. 31${invalid_netmask} 255.255.253.0 32${alpha_netmask} ff.ff.ff.ff 33# Maximum value of octet in netmask is 255. 34${out_of_range_netmask} 255.256.255.0 35${more_byte_netmask} 255.255.255.0.0 36${less_byte_netmask} 255.255.255 37${threshold_netmask} 255.255.255.255 38${lowest_netmask} 128.0.0.0 39 40# There will be 4 octets in IP address (e.g. xx.xx.xx.xx) 41# but trying to configure xx.xx.xx 42${less_octet_ip} 10.3.36 43 44# For the address 10.6.6.6, the 10.6.6.0 portion describes the 45# network ID and the 6 describe the host. 46 47${network_id} 10.7.7.0 48${hex_ip} 0xa.0xb.0xc.0xd 49${negative_ip} 10.-7.-7.7 50@{static_name_servers} 10.5.5.5 51@{null_value} null 52@{empty_dictionary} {} 53@{string_value} aa.bb.cc.dd 54 55*** Test Cases *** 56 57Get IP Address And Verify 58 [Documentation] Get IP Address And Verify. 59 [Tags] Get_IP_Address_And_Verify 60 61 FOR ${network_configuration} IN @{network_configurations} 62 Verify IP On BMC ${network_configuration['Address']} 63 END 64 65Get Netmask And Verify 66 [Documentation] Get Netmask And Verify. 67 [Tags] Get_Netmask_And_Verify 68 69 FOR ${network_configuration} IN @{network_configurations} 70 Verify Netmask On BMC ${network_configuration['SubnetMask']} 71 END 72 73Get Gateway And Verify 74 [Documentation] Get gateway and verify it's existence on the BMC. 75 [Tags] Get_Gateway_And_Verify 76 77 FOR ${network_configuration} IN @{network_configurations} 78 Verify Gateway On BMC ${network_configuration['Gateway']} 79 END 80 81Get MAC Address And Verify 82 [Documentation] Get MAC address and verify it's existence on the BMC. 83 [Tags] Get_MAC_Address_And_Verify 84 85 ${active_channel_config}= Get Active Channel Config 86 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 87 88 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 89 ${macaddr}= Get From Dictionary ${resp.dict} MACAddress 90 Validate MAC On BMC ${macaddr} 91 92Verify All Configured IP And Netmask 93 [Documentation] Verify all configured IP and netmask on BMC. 94 [Tags] Verify_All_Configured_IP_And_Netmask 95 96 FOR ${network_configuration} IN @{network_configurations} 97 Verify IP And Netmask On BMC ${network_configuration['Address']} 98 ... ${network_configuration['SubnetMask']} 99 END 100 101Get Hostname And Verify 102 [Documentation] Get hostname via Redfish and verify. 103 [Tags] Get_Hostname_And_Verify 104 105 ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName 106 107 Validate Hostname On BMC ${hostname} 108 109Configure Hostname And Verify 110 [Documentation] Configure hostname via Redfish and verify. 111 [Tags] Configure_Hostname_And_Verify 112 [Teardown] Run Keywords 113 ... Configure Hostname ${hostname} AND Validate Hostname On BMC ${hostname} 114 115 ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName 116 117 Configure Hostname ${test_hostname} 118 Validate Hostname On BMC ${test_hostname} 119 120 121Add Valid IPv4 Address And Verify 122 [Documentation] Add IPv4 Address via Redfish and verify. 123 [Tags] Add_Valid_IPv4_Addres_And_Verify 124 [Teardown] Run Keywords 125 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 126 127 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 128 129Add Invalid IPv4 Address And Verify 130 [Documentation] Add Invalid IPv4 Address via Redfish and verify. 131 [Tags] Add_Invalid_IPv4_Addres_And_Verify 132 133 Add IP Address ${test_ipv4_invalid_addr} ${test_subnet_mask} 134 ... ${test_gateway} valid_status_codes=${HTTP_BAD_REQUEST} 135 136Configure Out Of Range IP 137 [Documentation] Configure out-of-range IP address. 138 [Tags] Configure_Out_Of_Range_IP 139 [Template] Add IP Address 140 141 # ip subnet_mask gateway valid_status_codes 142 ${out_of_range_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 143 144Configure Broadcast IP 145 [Documentation] Configure broadcast IP address. 146 [Tags] Configure_Broadcast_IP 147 [Template] Add IP Address 148 [Teardown] Clear IP Settings On Fail ${broadcast_ip} 149 150 # ip subnet_mask gateway valid_status_codes 151 ${broadcast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 152 153Configure Multicast IP 154 [Documentation] Configure multicast IP address. 155 [Tags] Configure_Multicast_IP 156 [Template] Add IP Address 157 [Teardown] Clear IP Settings On Fail ${multicast_ip} 158 159 # ip subnet_mask gateway valid_status_codes 160 ${multicast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 161 162Configure Loopback IP 163 [Documentation] Configure loopback IP address. 164 [Tags] Configure_Loopback_IP 165 [Template] Add IP Address 166 [Teardown] Clear IP Settings On Fail ${loopback_ip} 167 168 # ip subnet_mask gateway valid_status_codes 169 ${loopback_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 170 171Add Valid IPv4 Address And Check Persistency 172 [Documentation] Add IPv4 address and check peristency. 173 [Tags] Add_Valid_IPv4_Addres_And_Check_Persistency 174 [Teardown] Run Keywords 175 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 176 177 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 178 179 # Reboot BMC and verify persistency. 180 OBMC Reboot (off) 181 Redfish.Login 182 Verify IP On BMC ${test_ipv4_addr} 183 184Add Fourth Octet Threshold IP And Verify 185 [Documentation] Add fourth octet threshold IP and verify. 186 [Tags] Add_Fourth_Octet_Threshold_IP_And_Verify 187 [Teardown] Run Keywords 188 ... Delete IP Address 10.7.7.254 AND Test Teardown Execution 189 190 Add IP Address 10.7.7.254 ${test_subnet_mask} ${test_gateway} 191 192Add Fourth Octet Lowest IP And Verify 193 [Documentation] Add fourth octet lowest IP and verify. 194 [Tags] Add_Fourth_Octet_Lowest_IP_And_Verify 195 [Teardown] Run Keywords 196 ... Delete IP Address 10.7.7.1 AND Test Teardown Execution 197 198 Add IP Address 10.7.7.1 ${test_subnet_mask} ${test_gateway} 199 200Add Third Octet Threshold IP And Verify 201 [Documentation] Add third octet threshold IP and verify. 202 [Tags] Add_Third_Octet_Threshold_IP_And_Verify 203 [Teardown] Run Keywords 204 ... Delete IP Address 10.7.255.7 AND Test Teardown Execution 205 206 Add IP Address 10.7.255.7 ${test_subnet_mask} ${test_gateway} 207 208Add Third Octet Lowest IP And Verify 209 [Documentation] Add third octet lowest IP and verify. 210 [Tags] Add_Third_Octet_Lowest_IP_And_Verify 211 [Teardown] Run Keywords 212 ... Delete IP Address 10.7.0.7 AND Test Teardown Execution 213 214 Add IP Address 10.7.0.7 ${test_subnet_mask} ${test_gateway} 215 216Add Second Octet Threshold IP And Verify 217 [Documentation] Add second octet threshold IP and verify. 218 [Tags] Add_Second_Octet_Threshold_IP_And_Verify 219 [Teardown] Run Keywords 220 ... Delete IP Address 10.255.7.7 AND Test Teardown Execution 221 222 Add IP Address 10.255.7.7 ${test_subnet_mask} ${test_gateway} 223 224Add Second Octet Lowest IP And Verify 225 [Documentation] Add second octet lowest IP and verify. 226 [Tags] Add_Second_Octet_Lowest_IP_And_Verify 227 [Teardown] Run Keywords 228 ... Delete IP Address 10.0.7.7 AND Test Teardown Execution 229 230 Add IP Address 10.0.7.7 ${test_subnet_mask} ${test_gateway} 231 232Add First Octet Threshold IP And Verify 233 [Documentation] Add first octet threshold IP and verify. 234 [Tags] Add_First_Octet_Threshold_IP_And_Verify 235 [Teardown] Run Keywords 236 ... Delete IP Address 223.7.7.7 AND Test Teardown Execution 237 238 Add IP Address 223.7.7.7 ${test_subnet_mask} ${test_gateway} 239 240Add First Octet Lowest IP And Verify 241 [Documentation] Add first octet lowest IP and verify. 242 [Tags] Add_First_Octet_Lowest_IP_And_Verify 243 [Teardown] Run Keywords 244 ... Delete IP Address 1.7.7.7 AND Test Teardown Execution 245 246 Add IP Address 1.7.7.7 ${test_subnet_mask} ${test_gateway} 247 248Configure Invalid Netmask 249 [Documentation] Verify error while setting invalid netmask. 250 [Tags] Configure_Invalid_Netmask 251 [Template] Add IP Address 252 253 # ip subnet_mask gateway valid_status_codes 254 ${test_ipv4_addr} ${invalid_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 255 256Configure Out Of Range Netmask 257 [Documentation] Verify error while setting out of range netmask. 258 [Tags] Configure_Out_Of_Range_Netmask 259 [Template] Add IP Address 260 261 # ip subnet_mask gateway valid_status_codes 262 ${test_ipv4_addr} ${out_of_range_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 263 264Configure Alpha Netmask 265 [Documentation] Verify error while setting alpha netmask. 266 [Tags] Configure_Alpha_Netmask 267 [Template] Add IP Address 268 269 # ip subnet_mask gateway valid_status_codes 270 ${test_ipv4_addr} ${alpha_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 271 272Configure More Byte Netmask 273 [Documentation] Verify error while setting more byte netmask. 274 [Tags] Configure_More_Byte_Netmask 275 [Template] Add IP Address 276 277 # ip subnet_mask gateway valid_status_codes 278 ${test_ipv4_addr} ${more_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 279 280Configure Less Byte Netmask 281 [Documentation] Verify error while setting less byte netmask. 282 [Tags] Configure_Less_Byte_Netmask 283 [Template] Add IP Address 284 285 # ip subnet_mask gateway valid_status_codes 286 ${test_ipv4_addr} ${less_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 287 288Configure Threshold Netmask And Verify 289 [Documentation] Configure threshold netmask and verify. 290 [Tags] Configure_Threshold_Netmask_And_verify 291 [Teardown] Run Keywords 292 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 293 294 Add IP Address ${test_ipv4_addr} ${threshold_netmask} ${test_gateway} 295 296Configure Lowest Netmask And Verify 297 [Documentation] Configure lowest netmask and verify. 298 [Tags] Configure_Lowest_Netmask_And_verify 299 [Teardown] Run Keywords 300 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 301 302 Add IP Address ${test_ipv4_addr} ${lowest_netmask} ${test_gateway} 303 304Configure Network ID 305 [Documentation] Verify error while configuring network ID. 306 [Tags] Configure_Network_ID 307 [Template] Add IP Address 308 [Teardown] Clear IP Settings On Fail ${network_id} 309 310 # ip subnet_mask gateway valid_status_codes 311 ${network_id} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 312 313Configure Less Octet IP 314 [Documentation] Verify error while Configuring less octet IP address. 315 [Tags] Configure_Less_Octet_IP 316 [Template] Add IP Address 317 318 # ip subnet_mask gateway valid_status_codes 319 ${less_octet_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 320 321Configure Empty IP 322 [Documentation] Verify error while Configuring empty IP address. 323 [Tags] Configure_Empty_IP 324 [Template] Add IP Address 325 326 # ip subnet_mask gateway valid_status_codes 327 ${EMPTY} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 328 329Configure Special Char IP 330 [Documentation] Configure invalid IP address containing special chars. 331 [Tags] Configure_Special_Char_IP 332 [Template] Add IP Address 333 334 # ip subnet_mask gateway valid_status_codes 335 @@@.%%.44.11 ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 336 337Configure Hexadecimal IP 338 [Documentation] Configure invalid IP address containing hex value. 339 [Tags] Configure_Hexadecimal_IP 340 [Template] Add IP Address 341 342 # ip subnet_mask gateway valid_status_codes 343 ${hex_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 344 345Configure Negative Octet IP 346 [Documentation] Configure invalid IP address containing negative octet. 347 [Tags] Configure_Negative_Octet_IP 348 [Template] Add IP Address 349 350 # ip subnet_mask gateway valid_status_codes 351 ${negative_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 352 353Configure Incomplete IP For Gateway 354 [Documentation] Configure incomplete IP for gateway and expect an error. 355 [Tags] Configure_Incomplete_IP_For_Gateway 356 [Template] Add IP Address 357 358 # ip subnet_mask gateway valid_status_codes 359 ${test_ipv4_addr} ${test_subnet_mask} ${less_octet_ip} ${HTTP_BAD_REQUEST} 360 361Configure Special Char IP For Gateway 362 [Documentation] Configure special char IP for gateway and expect an error. 363 [Tags] Configure_Special_Char_IP_For_Gateway 364 [Template] Add IP Address 365 366 # ip subnet_mask gateway valid_status_codes 367 ${test_ipv4_addr} ${test_subnet_mask} @@@.%%.44.11 ${HTTP_BAD_REQUEST} 368 369Configure Hexadecimal IP For Gateway 370 [Documentation] Configure hexadecimal IP for gateway and expect an error. 371 [Tags] Configure_Hexadecimal_IP_For_Gateway 372 [Template] Add IP Address 373 374 # ip subnet_mask gateway valid_status_codes 375 ${test_ipv4_addr} ${test_subnet_mask} ${hex_ip} ${HTTP_BAD_REQUEST} 376 377Get DNS Server And Verify 378 [Documentation] Get DNS server via Redfish and verify. 379 [Tags] Get_DNS_Server_And_Verify 380 381 Verify CLI and Redfish Nameservers 382 383Configure DNS Server And Verify 384 [Documentation] Configure DNS server and verify. 385 [Tags] Configure_DNS_Server_And_Verify 386 [Setup] DNS Test Setup Execution 387 [Teardown] Run Keywords 388 ... Configure Static Name Servers AND Test Teardown Execution 389 390 Configure Static Name Servers ${static_name_servers} 391 Verify CLI and Redfish Nameservers 392 393Delete DNS Server And Verify 394 [Documentation] Delete DNS server and verify. 395 [Tags] Delete_DNS_Server_And_Verify 396 [Setup] DNS Test Setup Execution 397 [Teardown] Run Keywords 398 ... Configure Static Name Servers AND Test Teardown Execution 399 400 Delete Static Name Servers 401 Verify CLI and Redfish Nameservers 402 403Configure DNS Server And Check Persistency 404 [Documentation] Configure DNS server and check persistency on reboot. 405 [Tags] Configure_DNS_Server_And_Check_Persistency 406 [Setup] DNS Test Setup Execution 407 [Teardown] Run Keywords 408 ... Configure Static Name Servers AND Test Teardown Execution 409 410 Configure Static Name Servers ${static_name_servers} 411 # Reboot BMC and verify persistency. 412 OBMC Reboot (off) 413 Verify CLI and Redfish Nameservers 414 415Configure Loopback IP For Gateway 416 [Documentation] Configure loopback IP for gateway and expect an error. 417 [Tags] Configure_Loopback_IP_For_Gateway 418 [Template] Add IP Address 419 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 420 421 # ip subnet_mask gateway valid_status_codes 422 ${test_ipv4_addr} ${test_subnet_mask} ${loopback_ip} ${HTTP_BAD_REQUEST} 423 424Configure Network ID For Gateway 425 [Documentation] Configure network ID for gateway and expect an error. 426 [Tags] Configure_Network_ID_For_Gateway 427 [Template] Add IP Address 428 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 429 430 # ip subnet_mask gateway valid_status_codes 431 ${test_ipv4_addr} ${test_subnet_mask} ${network_id} ${HTTP_BAD_REQUEST} 432 433Configure Multicast IP For Gateway 434 [Documentation] Configure multicast IP for gateway and expect an error. 435 [Tags] Configure_Multicast_IP_For_Gateway 436 [Template] Add IP Address 437 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 438 439 # ip subnet_mask gateway valid_status_codes 440 ${test_ipv4_addr} ${test_subnet_mask} ${multicast_ip} ${HTTP_BAD_REQUEST} 441 442Configure Broadcast IP For Gateway 443 [Documentation] Configure broadcast IP for gateway and expect an error. 444 [Tags] Configure_Broadcast_IP_For_Gateway 445 [Template] Add IP Address 446 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 447 448 # ip subnet_mask gateway valid_status_codes 449 ${test_ipv4_addr} ${test_subnet_mask} ${broadcast_ip} ${HTTP_BAD_REQUEST} 450 451Configure Null Value For DNS Server 452 [Documentation] Configure null value for DNS server and expect an error. 453 [Tags] Configure_Null_Value_For_DNS_Server 454 [Setup] DNS Test Setup Execution 455 [Teardown] Run Keywords 456 ... Configure Static Name Servers AND Test Teardown Execution 457 458 Configure Static Name Servers ${null_value} ${HTTP_BAD_REQUEST} 459 460Configure Empty Value For DNS Server 461 [Documentation] Configure empty value for DNS server and expect an error. 462 [Tags] Configure_Empty_Value_For_DNS_Server 463 [Setup] DNS Test Setup Execution 464 [Teardown] Run Keywords 465 ... Configure Static Name Servers AND Test Teardown Execution 466 467 Configure Static Name Servers ${empty_dictionary} ${HTTP_BAD_REQUEST} 468 469Configure String Value For DNS Server 470 [Documentation] Configure string value for DNS server and expect an error. 471 [Tags] Configure_String_Value_For_DNS_Server 472 [Setup] DNS Test Setup Execution 473 [Teardown] Run Keywords 474 ... Configure Static Name Servers AND Test Teardown Execution 475 476 Configure Static Name Servers ${string_value} ${HTTP_BAD_REQUEST} 477 478Modify IPv4 Address And Verify 479 [Documentation] Modify IP address via Redfish and verify. 480 [Tags] Modify_IPv4_Addres_And_Verify 481 [Teardown] Run Keywords 482 ... Delete IP Address ${test_ipv4_addr2} AND Test Teardown Execution 483 484 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 485 486 Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway} 487 488 489Configure Invalid Values For DNS Server 490 [Documentation] Configure invalid values for DNS server and expect an error. 491 [Tags] Configure_Invalid_Value_For_DNS_Server 492 [Setup] DNS Test Setup Execution 493 [Template] Configure Static Name Servers 494 [Teardown] Run Keywords 495 ... Configure Static Name Servers AND Test Teardown Execution 496 497 # static_name_servers valid_status_codes 498 0xa.0xb.0xc.0xd ${HTTP_BAD_REQUEST} 499 10.-7.-7.-7 ${HTTP_BAD_REQUEST} 500 10.3.36 ${HTTP_BAD_REQUEST} 501 @@@.%%.44.11 ${HTTP_BAD_REQUEST} 502 503 504Config Multiple DNS Servers And Verify 505 [Documentation] Config multiple DNS servers and verify. 506 [Tags] Config_Multiple_DNS_Servers_And_Verify 507 [Setup] DNS Test Setup Execution 508 [Teardown] Run Keywords 509 ... Configure Static Name Servers AND Test Teardown Execution 510 511 @{list_name_servers}= Create List 10.5.5.10 10.20.5.10 10.5.6.7 512 Configure Static Name Servers ${list_name_servers} 513 Verify CLI and Redfish Nameservers 514 515 516Configure And Verify Multiple Static IPv4 Addresses 517 [Documentation] Configure multiple static ipv4 address via Redfish and verify. 518 [Tags] Configure_And_Verify_Multiple_Static_IPv4_Addresses 519 [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} 520 ... AND Test Teardown Execution 521 522 ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} 523 Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} 524 525 526Configure Multiple Static IPv4 Addresses And Check Persistency 527 [Documentation] Configure multiple static ipv4 address via Redfish and check persistency. 528 [Tags] Configure_Multiple_Static_IPv4_Addresses_And_Check_Persistency 529 [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} 530 ... AND Test Teardown Execution 531 532 ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} 533 Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} 534 535 # Reboot BMC and verify persistency. 536 OBMC Reboot (off) 537 538 FOR ${ip} IN @{test_ipv4_addresses} 539 Verify IP And Netmask On BMC ${ip} ${test_subnet_mask} 540 END 541 542 543*** Keywords *** 544 545Test Setup Execution 546 [Documentation] Test setup execution. 547 548 Redfish.Login 549 550 @{network_configurations}= Get Network Configuration 551 Set Test Variable @{network_configurations} 552 553 # Get BMC IP address and prefix length. 554 ${ip_data}= Get BMC IP Info 555 Set Test Variable ${ip_data} 556 557 558Verify Netmask On BMC 559 [Documentation] Verify netmask on BMC. 560 [Arguments] ${netmask} 561 562 # Description of the argument(s): 563 # netmask netmask value to be verified. 564 565 ${prefix_length}= Netmask Prefix Length ${netmask} 566 567 Should Contain Match ${ip_data} */${prefix_length} 568 ... msg=Prefix length does not exist. 569 570Verify IP And Netmask On BMC 571 [Documentation] Verify IP and netmask on BMC. 572 [Arguments] ${ip} ${netmask} 573 574 # Description of the argument(s): 575 # ip IP address to be verified. 576 # netmask netmask value to be verified. 577 578 ${prefix_length}= Netmask Prefix Length ${netmask} 579 @{ip_data}= Get BMC IP Info 580 581 ${ip_with_netmask}= Catenate ${ip}/${prefix_length} 582 Should Contain ${ip_data} ${ip_with_netmask} 583 ... msg=IP and netmask pair does not exist. 584 585Validate Hostname On BMC 586 [Documentation] Verify that the hostname read via Redfish is the same as the 587 ... hostname configured on system. 588 [Arguments] ${hostname} 589 590 # Description of argument(s): 591 # hostname A hostname value which is to be compared to the hostname 592 # configured on system. 593 594 ${sys_hostname}= Get BMC Hostname 595 Should Be Equal ${sys_hostname} ${hostname} 596 ... ignore_case=True msg=Hostname does not exist. 597 598Test Teardown Execution 599 [Documentation] Test teardown execution. 600 601 FFDC On Test Case Fail 602 Redfish.Logout 603 604Clear IP Settings On Fail 605 [Documentation] Clear IP settings on fail. 606 [Arguments] ${ip} 607 608 # Description of argument(s): 609 # ip IP address to be deleted. 610 611 Run Keyword If '${TEST STATUS}' == 'FAIL' 612 ... Delete IP Address ${ip} 613 614 Test Teardown Execution 615 616Verify CLI and Redfish Nameservers 617 [Documentation] Verify that nameservers obtained via Redfish do not 618 ... match those found in /etc/resolv.conf. 619 620 ${active_channel_config}= Get Active Channel Config 621 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 622 623 ${redfish_nameservers}= Redfish.Get Attribute 624 ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers 625 ${resolve_conf_nameservers}= CLI Get Nameservers 626 Rqprint Vars redfish_nameservers resolve_conf_nameservers 627 628 # Check that the 2 lists are equivalent. 629 ${match}= Evaluate set($redfish_nameservers) == set($resolve_conf_nameservers) 630 Should Be True ${match} 631 ... The nameservers obtained via Redfish do not match those found in /etc/resolv.conf. 632 633 634Configure Static Name Servers 635 [Documentation] Configure DNS server on BMC. 636 [Arguments] ${static_name_servers}=${original_nameservers} 637 ... ${valid_status_codes}=${HTTP_OK} 638 639 # Description of the argument(s): 640 # static_name_servers A list of static name server IPs to be 641 # configured on the BMC. 642 643 ${active_channel_config}= Get Active Channel Config 644 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 645 646 ${type} = Evaluate type($static_name_servers).__name__ 647 ${static_name_servers}= Set Variable If '${type}'=='str' 648 ... '${static_name_servers}' ${static_name_servers} 649 650 # Currently BMC is sending 500 response code instead of 400 for invalid scenarios. 651 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 652 ... body={'StaticNameServers': ${static_name_servers}} 653 ... valid_status_codes=[${valid_status_codes}, ${HTTP_INTERNAL_SERVER_ERROR}] 654 655 # Patch operation takes 1 to 3 seconds to set new value. 656 Sleep 3s 657 658 # Check if newly added DNS server is configured on BMC. 659 ${cli_nameservers}= CLI Get Nameservers 660 ${cmd_status}= Run Keyword And Return Status 661 ... List Should Contain Sub List ${cli_nameservers} ${static_name_servers} 662 663 Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 664 ... Should Be True ${cmd_status} == ${True} 665 ... ELSE Should Be True ${cmd_status} == ${False} 666 667Delete Static Name Servers 668 [Documentation] Delete static name servers. 669 670 Configure Static Name Servers static_name_servers=@{EMPTY} 671 672 # Check if all name servers deleted on BMC. 673 ${nameservers}= CLI Get Nameservers 674 Should Be Empty ${nameservers} 675 676DNS Test Setup Execution 677 [Documentation] Do DNS test setup execution. 678 679 Redfish.Login 680 681 ${active_channel_config}= Get Active Channel Config 682 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 683 684 ${original_nameservers}= Redfish.Get Attribute 685 ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers 686 687 Rprint Vars original_nameservers 688 # Set suite variables to trigger restoration during teardown. 689 Set Suite Variable ${original_nameservers} 690 691Suite Setup Execution 692 [Documentation] Do suite setup execution. 693 694 ${test_gateway}= Get BMC Default Gateway 695 Set Suite Variable ${test_gateway} 696 697Update IP Address 698 [Documentation] Update IP address of BMC. 699 [Arguments] ${ip} ${new_ip} ${netmask} ${gw_ip} ${valid_status_codes}=${HTTP_OK} 700 701 # Description of argument(s): 702 # ip IP address to be replaced (e.g. "10.7.7.7"). 703 # new_ip New IP address to be configured. 704 # netmask Netmask value. 705 # gw_ip Gateway IP address. 706 # valid_status_codes Expected return code from patch operation 707 # (e.g. "200"). See prolog of rest_request 708 # method in redfish_plus.py for details. 709 710 ${empty_dict}= Create Dictionary 711 ${patch_list}= Create List 712 ${ip_data}= Create Dictionary Address=${new_ip} SubnetMask=${netmask} Gateway=${gw_ip} 713 714 # Find the position of IP address to be modified. 715 @{network_configurations}= Get Network Configuration 716 FOR ${network_configuration} IN @{network_configurations} 717 Run Keyword If '${network_configuration['Address']}' == '${ip}' 718 ... Append To List ${patch_list} ${ip_data} 719 ... ELSE Append To List ${patch_list} ${empty_dict} 720 END 721 722 ${ip_found}= Run Keyword And Return Status List Should Contain Value 723 ... ${patch_list} ${ip_data} msg=${ip} does not exist on BMC 724 Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC 725 726 # Run patch command only if given IP is found on BMC 727 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 728 729 Redfish.patch ${REDFISH_NW_ETH0_URI} body=&{data} valid_status_codes=[${valid_status_codes}] 730 731 # Note: Network restart takes around 15-18s after patch request processing. 732 Sleep ${NETWORK_TIMEOUT}s 733 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 734 735 Verify IP On BMC ${new_ip} 736 Validate Network Config On BMC 737 738Configure Multiple Static IPv4 Addresses 739 [Documentation] Configure multiple static ipv4 address via Redfish and verify. 740 [Arguments] ${ip_addreses} ${subnet_mask} ${gateway} 741 742 # Description of argument(s): 743 # ip_addreses A list of IP addresses to be added (e.g.["10.7.7.7"]). 744 # subnet_mask Subnet mask for the IP to be added (e.g. "255.255.0.0"). 745 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 746 747 FOR ${ip} IN @{ip_addreses} 748 Add IP Address ${ip} ${subnet_mask} ${gateway} 749 END 750 Validate Network Config On BMC 751 752 753Delete Multiple Static IPv4 Addresses 754 [Documentation] Delete multiple static ipv4 address via Redfish. 755 [Arguments] ${ip_addreses} 756 757 # Description of argument(s): 758 # ip_addreses A list of IP addresses to be deleted (e.g.["10.7.7.7"]). 759 760 FOR ${ip} IN @{ip_addreses} 761 Delete IP Address ${ip} 762 END 763 Validate Network Config On BMC 764