1*** Settings *** 2Documentation Network interface configuration and verification 3 ... tests. 4 5Resource ../../lib/bmc_redfish_resource.robot 6Resource ../../lib/bmc_network_utils.robot 7Resource ../../lib/openbmc_ffdc.robot 8Library ../../lib/bmc_network_utils.py 9Library Collections 10 11Test Setup Test Setup Execution 12Test Teardown Test Teardown Execution 13Suite Setup Suite Setup Execution 14 15Force Tags Network_Conf_Test 16 17*** Variables *** 18${test_hostname} openbmc 19${test_ipv4_addr} 10.7.7.7 20${test_ipv4_invalid_addr} 0.0.1.a 21${test_subnet_mask} 255.255.0.0 22${broadcast_ip} 10.7.7.255 23${loopback_ip} 127.0.0.2 24${multicast_ip} 224.6.6.6 25${out_of_range_ip} 10.7.7.256 26${test_ipv4_addr2} 10.7.7.8 27 28# Valid netmask is 4 bytes long and has continuous block of 1s. 29# Maximum valid value in each octet is 255 and least value is 0. 30# 253 is not valid, as binary value is 11111101. 31${invalid_netmask} 255.255.253.0 32${alpha_netmask} ff.ff.ff.ff 33# Maximum value of octet in netmask is 255. 34${out_of_range_netmask} 255.256.255.0 35${more_byte_netmask} 255.255.255.0.0 36${less_byte_netmask} 255.255.255 37${threshold_netmask} 255.255.255.255 38${lowest_netmask} 128.0.0.0 39 40# There will be 4 octets in IP address (e.g. xx.xx.xx.xx) 41# but trying to configure xx.xx.xx 42${less_octet_ip} 10.3.36 43 44# For the address 10.6.6.6, the 10.6.6.0 portion describes the 45# network ID and the 6 describe the host. 46 47${network_id} 10.7.7.0 48${hex_ip} 0xa.0xb.0xc.0xd 49${negative_ip} 10.-7.-7.7 50@{static_name_servers} 10.5.5.5 51@{null_value} null 52@{empty_dictionary} {} 53@{string_value} aa.bb.cc.dd 54 55*** Test Cases *** 56 57Get IP Address And Verify 58 [Documentation] Get IP Address And Verify. 59 [Tags] Get_IP_Address_And_Verify 60 61 FOR ${network_configuration} IN @{network_configurations} 62 Verify IP On BMC ${network_configuration['Address']} 63 END 64 65Get Netmask And Verify 66 [Documentation] Get Netmask And Verify. 67 [Tags] Get_Netmask_And_Verify 68 69 FOR ${network_configuration} IN @{network_configurations} 70 Verify Netmask On BMC ${network_configuration['SubnetMask']} 71 END 72 73Get Gateway And Verify 74 [Documentation] Get gateway and verify it's existence on the BMC. 75 [Tags] Get_Gateway_And_Verify 76 77 FOR ${network_configuration} IN @{network_configurations} 78 Verify Gateway On BMC ${network_configuration['Gateway']} 79 END 80 81Get MAC Address And Verify 82 [Documentation] Get MAC address and verify it's existence on the BMC. 83 [Tags] Get_MAC_Address_And_Verify 84 85 ${active_channel_config}= Get Active Channel Config 86 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 87 88 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 89 ${macaddr}= Get From Dictionary ${resp.dict} MACAddress 90 Validate MAC On BMC ${macaddr} 91 92Verify All Configured IP And Netmask 93 [Documentation] Verify all configured IP and netmask on BMC. 94 [Tags] Verify_All_Configured_IP_And_Netmask 95 96 FOR ${network_configuration} IN @{network_configurations} 97 Verify IP And Netmask On BMC ${network_configuration['Address']} 98 ... ${network_configuration['SubnetMask']} 99 END 100 101Get Hostname And Verify 102 [Documentation] Get hostname via Redfish and verify. 103 [Tags] Get_Hostname_And_Verify 104 105 ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName 106 107 Validate Hostname On BMC ${hostname} 108 109Configure Hostname And Verify 110 [Documentation] Configure hostname via Redfish and verify. 111 [Tags] Configure_Hostname_And_Verify 112 [Teardown] Run Keywords 113 ... Configure Hostname ${hostname} AND Validate Hostname On BMC ${hostname} 114 115 ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName 116 117 Configure Hostname ${test_hostname} 118 Validate Hostname On BMC ${test_hostname} 119 120 121Add Valid IPv4 Address And Verify 122 [Documentation] Add IPv4 Address via Redfish and verify. 123 [Tags] Add_Valid_IPv4_Addres_And_Verify 124 [Teardown] Run Keywords 125 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 126 127 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 128 129Add Invalid IPv4 Address And Verify 130 [Documentation] Add Invalid IPv4 Address via Redfish and verify. 131 [Tags] Add_Invalid_IPv4_Addres_And_Verify 132 133 Add IP Address ${test_ipv4_invalid_addr} ${test_subnet_mask} 134 ... ${test_gateway} valid_status_codes=${HTTP_BAD_REQUEST} 135 136Configure Out Of Range IP 137 [Documentation] Configure out-of-range IP address. 138 [Tags] Configure_Out_Of_Range_IP 139 [Template] Add IP Address 140 141 # ip subnet_mask gateway valid_status_codes 142 ${out_of_range_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 143 144Configure Broadcast IP 145 [Documentation] Configure broadcast IP address. 146 [Tags] Configure_Broadcast_IP 147 [Template] Add IP Address 148 [Teardown] Clear IP Settings On Fail ${broadcast_ip} 149 150 # ip subnet_mask gateway valid_status_codes 151 ${broadcast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 152 153Configure Multicast IP 154 [Documentation] Configure multicast IP address. 155 [Tags] Configure_Multicast_IP 156 [Template] Add IP Address 157 [Teardown] Clear IP Settings On Fail ${multicast_ip} 158 159 # ip subnet_mask gateway valid_status_codes 160 ${multicast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 161 162Configure Loopback IP 163 [Documentation] Configure loopback IP address. 164 [Tags] Configure_Loopback_IP 165 [Template] Add IP Address 166 [Teardown] Clear IP Settings On Fail ${loopback_ip} 167 168 # ip subnet_mask gateway valid_status_codes 169 ${loopback_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 170 171Add Valid IPv4 Address And Check Persistency 172 [Documentation] Add IPv4 address and check peristency. 173 [Tags] Add_Valid_IPv4_Addres_And_Check_Persistency 174 [Teardown] Run Keywords 175 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 176 177 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 178 179 # Reboot BMC and verify persistency. 180 OBMC Reboot (off) 181 Redfish.Login 182 Verify IP On BMC ${test_ipv4_addr} 183 184Add Fourth Octet Threshold IP And Verify 185 [Documentation] Add fourth octet threshold IP and verify. 186 [Tags] Add_Fourth_Octet_Threshold_IP_And_Verify 187 [Teardown] Run Keywords 188 ... Delete IP Address 10.7.7.254 AND Test Teardown Execution 189 190 Add IP Address 10.7.7.254 ${test_subnet_mask} ${test_gateway} 191 192Add Fourth Octet Lowest IP And Verify 193 [Documentation] Add fourth octet lowest IP and verify. 194 [Tags] Add_Fourth_Octet_Lowest_IP_And_Verify 195 [Teardown] Run Keywords 196 ... Delete IP Address 10.7.7.1 AND Test Teardown Execution 197 198 Add IP Address 10.7.7.1 ${test_subnet_mask} ${test_gateway} 199 200Add Third Octet Threshold IP And Verify 201 [Documentation] Add third octet threshold IP and verify. 202 [Tags] Add_Third_Octet_Threshold_IP_And_Verify 203 [Teardown] Run Keywords 204 ... Delete IP Address 10.7.255.7 AND Test Teardown Execution 205 206 Add IP Address 10.7.255.7 ${test_subnet_mask} ${test_gateway} 207 208Add Third Octet Lowest IP And Verify 209 [Documentation] Add third octet lowest IP and verify. 210 [Tags] Add_Third_Octet_Lowest_IP_And_Verify 211 [Teardown] Run Keywords 212 ... Delete IP Address 10.7.0.7 AND Test Teardown Execution 213 214 Add IP Address 10.7.0.7 ${test_subnet_mask} ${test_gateway} 215 216Add Second Octet Threshold IP And Verify 217 [Documentation] Add second octet threshold IP and verify. 218 [Tags] Add_Second_Octet_Threshold_IP_And_Verify 219 [Teardown] Run Keywords 220 ... Delete IP Address 10.255.7.7 AND Test Teardown Execution 221 222 Add IP Address 10.255.7.7 ${test_subnet_mask} ${test_gateway} 223 224Add Second Octet Lowest IP And Verify 225 [Documentation] Add second octet lowest IP and verify. 226 [Tags] Add_Second_Octet_Lowest_IP_And_Verify 227 [Teardown] Run Keywords 228 ... Delete IP Address 10.0.7.7 AND Test Teardown Execution 229 230 Add IP Address 10.0.7.7 ${test_subnet_mask} ${test_gateway} 231 232Add First Octet Threshold IP And Verify 233 [Documentation] Add first octet threshold IP and verify. 234 [Tags] Add_First_Octet_Threshold_IP_And_Verify 235 [Teardown] Run Keywords 236 ... Delete IP Address 223.7.7.7 AND Test Teardown Execution 237 238 Add IP Address 223.7.7.7 ${test_subnet_mask} ${test_gateway} 239 240Add First Octet Lowest IP And Verify 241 [Documentation] Add first octet lowest IP and verify. 242 [Tags] Add_First_Octet_Lowest_IP_And_Verify 243 [Teardown] Run Keywords 244 ... Delete IP Address 1.7.7.7 AND Test Teardown Execution 245 246 Add IP Address 1.7.7.7 ${test_subnet_mask} ${test_gateway} 247 248Configure Invalid Netmask 249 [Documentation] Verify error while setting invalid netmask. 250 [Tags] Configure_Invalid_Netmask 251 [Template] Add IP Address 252 253 # ip subnet_mask gateway valid_status_codes 254 ${test_ipv4_addr} ${invalid_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 255 256Configure Out Of Range Netmask 257 [Documentation] Verify error while setting out of range netmask. 258 [Tags] Configure_Out_Of_Range_Netmask 259 [Template] Add IP Address 260 261 # ip subnet_mask gateway valid_status_codes 262 ${test_ipv4_addr} ${out_of_range_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 263 264Configure Alpha Netmask 265 [Documentation] Verify error while setting alpha netmask. 266 [Tags] Configure_Alpha_Netmask 267 [Template] Add IP Address 268 269 # ip subnet_mask gateway valid_status_codes 270 ${test_ipv4_addr} ${alpha_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 271 272Configure More Byte Netmask 273 [Documentation] Verify error while setting more byte netmask. 274 [Tags] Configure_More_Byte_Netmask 275 [Template] Add IP Address 276 277 # ip subnet_mask gateway valid_status_codes 278 ${test_ipv4_addr} ${more_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 279 280Configure Less Byte Netmask 281 [Documentation] Verify error while setting less byte netmask. 282 [Tags] Configure_Less_Byte_Netmask 283 [Template] Add IP Address 284 285 # ip subnet_mask gateway valid_status_codes 286 ${test_ipv4_addr} ${less_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} 287 288Configure Threshold Netmask And Verify 289 [Documentation] Configure threshold netmask and verify. 290 [Tags] Configure_Threshold_Netmask_And_verify 291 [Teardown] Run Keywords 292 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 293 294 Add IP Address ${test_ipv4_addr} ${threshold_netmask} ${test_gateway} 295 296Configure Lowest Netmask And Verify 297 [Documentation] Configure lowest netmask and verify. 298 [Tags] Configure_Lowest_Netmask_And_verify 299 [Teardown] Run Keywords 300 ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution 301 302 Add IP Address ${test_ipv4_addr} ${lowest_netmask} ${test_gateway} 303 304Configure Network ID 305 [Documentation] Verify error while configuring network ID. 306 [Tags] Configure_Network_ID 307 [Template] Add IP Address 308 [Teardown] Clear IP Settings On Fail ${network_id} 309 310 # ip subnet_mask gateway valid_status_codes 311 ${network_id} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 312 313Configure Less Octet IP 314 [Documentation] Verify error while Configuring less octet IP address. 315 [Tags] Configure_Less_Octet_IP 316 [Template] Add IP Address 317 318 # ip subnet_mask gateway valid_status_codes 319 ${less_octet_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 320 321Configure Empty IP 322 [Documentation] Verify error while Configuring empty IP address. 323 [Tags] Configure_Empty_IP 324 [Template] Add IP Address 325 326 # ip subnet_mask gateway valid_status_codes 327 ${EMPTY} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 328 329Configure Special Char IP 330 [Documentation] Configure invalid IP address containing special chars. 331 [Tags] Configure_Special_Char_IP 332 [Template] Add IP Address 333 334 # ip subnet_mask gateway valid_status_codes 335 @@@.%%.44.11 ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 336 337Configure Hexadecimal IP 338 [Documentation] Configure invalid IP address containing hex value. 339 [Tags] Configure_Hexadecimal_IP 340 [Template] Add IP Address 341 342 # ip subnet_mask gateway valid_status_codes 343 ${hex_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 344 345Configure Negative Octet IP 346 [Documentation] Configure invalid IP address containing negative octet. 347 [Tags] Configure_Negative_Octet_IP 348 [Template] Add IP Address 349 350 # ip subnet_mask gateway valid_status_codes 351 ${negative_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} 352 353Configure Incomplete IP For Gateway 354 [Documentation] Configure incomplete IP for gateway and expect an error. 355 [Tags] Configure_Incomplete_IP_For_Gateway 356 [Template] Add IP Address 357 358 # ip subnet_mask gateway valid_status_codes 359 ${test_ipv4_addr} ${test_subnet_mask} ${less_octet_ip} ${HTTP_BAD_REQUEST} 360 361Configure Special Char IP For Gateway 362 [Documentation] Configure special char IP for gateway and expect an error. 363 [Tags] Configure_Special_Char_IP_For_Gateway 364 [Template] Add IP Address 365 366 # ip subnet_mask gateway valid_status_codes 367 ${test_ipv4_addr} ${test_subnet_mask} @@@.%%.44.11 ${HTTP_BAD_REQUEST} 368 369Configure Hexadecimal IP For Gateway 370 [Documentation] Configure hexadecimal IP for gateway and expect an error. 371 [Tags] Configure_Hexadecimal_IP_For_Gateway 372 [Template] Add IP Address 373 374 # ip subnet_mask gateway valid_status_codes 375 ${test_ipv4_addr} ${test_subnet_mask} ${hex_ip} ${HTTP_BAD_REQUEST} 376 377Get DNS Server And Verify 378 [Documentation] Get DNS server via Redfish and verify. 379 [Tags] Get_DNS_Server_And_Verify 380 381 Verify CLI and Redfish Nameservers 382 383Configure DNS Server And Verify 384 [Documentation] Configure DNS server and verify. 385 [Tags] Configure_DNS_Server_And_Verify 386 [Setup] DNS Test Setup Execution 387 [Teardown] Run Keywords 388 ... Configure Static Name Servers AND Test Teardown Execution 389 390 Configure Static Name Servers ${static_name_servers} 391 Verify CLI and Redfish Nameservers 392 393Delete DNS Server And Verify 394 [Documentation] Delete DNS server and verify. 395 [Tags] Delete_DNS_Server_And_Verify 396 [Setup] DNS Test Setup Execution 397 [Teardown] Run Keywords 398 ... Configure Static Name Servers AND Test Teardown Execution 399 400 Delete Static Name Servers 401 Verify CLI and Redfish Nameservers 402 403Configure DNS Server And Check Persistency 404 [Documentation] Configure DNS server and check persistency on reboot. 405 [Tags] Configure_DNS_Server_And_Check_Persistency 406 [Setup] DNS Test Setup Execution 407 [Teardown] Run Keywords 408 ... Configure Static Name Servers AND Test Teardown Execution 409 410 Configure Static Name Servers ${static_name_servers} 411 # Reboot BMC and verify persistency. 412 OBMC Reboot (off) 413 Redfish.Login 414 Verify CLI and Redfish Nameservers 415 416Configure Loopback IP For Gateway 417 [Documentation] Configure loopback IP for gateway and expect an error. 418 [Tags] Configure_Loopback_IP_For_Gateway 419 [Template] Add IP Address 420 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 421 422 # ip subnet_mask gateway valid_status_codes 423 ${test_ipv4_addr} ${test_subnet_mask} ${loopback_ip} ${HTTP_BAD_REQUEST} 424 425Configure Network ID For Gateway 426 [Documentation] Configure network ID for gateway and expect an error. 427 [Tags] Configure_Network_ID_For_Gateway 428 [Template] Add IP Address 429 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 430 431 # ip subnet_mask gateway valid_status_codes 432 ${test_ipv4_addr} ${test_subnet_mask} ${network_id} ${HTTP_BAD_REQUEST} 433 434Configure Multicast IP For Gateway 435 [Documentation] Configure multicast IP for gateway and expect an error. 436 [Tags] Configure_Multicast_IP_For_Gateway 437 [Template] Add IP Address 438 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 439 440 # ip subnet_mask gateway valid_status_codes 441 ${test_ipv4_addr} ${test_subnet_mask} ${multicast_ip} ${HTTP_BAD_REQUEST} 442 443Configure Broadcast IP For Gateway 444 [Documentation] Configure broadcast IP for gateway and expect an error. 445 [Tags] Configure_Broadcast_IP_For_Gateway 446 [Template] Add IP Address 447 [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} 448 449 # ip subnet_mask gateway valid_status_codes 450 ${test_ipv4_addr} ${test_subnet_mask} ${broadcast_ip} ${HTTP_BAD_REQUEST} 451 452Configure Null Value For DNS Server 453 [Documentation] Configure null value for DNS server and expect an error. 454 [Tags] Configure_Null_Value_For_DNS_Server 455 [Setup] DNS Test Setup Execution 456 [Teardown] Run Keywords 457 ... Configure Static Name Servers AND Test Teardown Execution 458 459 Configure Static Name Servers ${null_value} ${HTTP_BAD_REQUEST} 460 461Configure Empty Value For DNS Server 462 [Documentation] Configure empty value for DNS server and expect an error. 463 [Tags] Configure_Empty_Value_For_DNS_Server 464 [Setup] DNS Test Setup Execution 465 [Teardown] Run Keywords 466 ... Configure Static Name Servers AND Test Teardown Execution 467 468 Configure Static Name Servers ${empty_dictionary} ${HTTP_BAD_REQUEST} 469 470Configure String Value For DNS Server 471 [Documentation] Configure string value for DNS server and expect an error. 472 [Tags] Configure_String_Value_For_DNS_Server 473 [Setup] DNS Test Setup Execution 474 [Teardown] Run Keywords 475 ... Configure Static Name Servers AND Test Teardown Execution 476 477 Configure Static Name Servers ${string_value} ${HTTP_BAD_REQUEST} 478 479Modify IPv4 Address And Verify 480 [Documentation] Modify IP address via Redfish and verify. 481 [Tags] Modify_IPv4_Addres_And_Verify 482 [Teardown] Run Keywords 483 ... Delete IP Address ${test_ipv4_addr2} AND Test Teardown Execution 484 485 Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} 486 487 Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway} 488 489 490Configure Invalid Values For DNS Server 491 [Documentation] Configure invalid values for DNS server and expect an error. 492 [Tags] Configure_Invalid_Value_For_DNS_Server 493 [Setup] DNS Test Setup Execution 494 [Template] Configure Static Name Servers 495 [Teardown] Run Keywords 496 ... Configure Static Name Servers AND Test Teardown Execution 497 498 # static_name_servers valid_status_codes 499 0xa.0xb.0xc.0xd ${HTTP_BAD_REQUEST} 500 10.-7.-7.-7 ${HTTP_BAD_REQUEST} 501 10.3.36 ${HTTP_BAD_REQUEST} 502 @@@.%%.44.11 ${HTTP_BAD_REQUEST} 503 504 505Config Multiple DNS Servers And Verify 506 [Documentation] Config multiple DNS servers and verify. 507 [Tags] Config_Multiple_DNS_Servers_And_Verify 508 [Setup] DNS Test Setup Execution 509 [Teardown] Run Keywords 510 ... Configure Static Name Servers AND Test Teardown Execution 511 512 @{list_name_servers}= Create List 10.5.5.10 10.20.5.10 10.5.6.7 513 Configure Static Name Servers ${list_name_servers} 514 Verify CLI and Redfish Nameservers 515 516 517Configure And Verify Multiple Static IPv4 Addresses 518 [Documentation] Configure multiple static ipv4 address via Redfish and verify. 519 [Tags] Configure_And_Verify_Multiple_Static_IPv4_Addresses 520 [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} 521 ... AND Test Teardown Execution 522 523 ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} 524 Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} 525 526 527Configure Multiple Static IPv4 Addresses And Check Persistency 528 [Documentation] Configure multiple static ipv4 address via Redfish and check persistency. 529 [Tags] Configure_Multiple_Static_IPv4_Addresses_And_Check_Persistency 530 [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} 531 ... AND Test Teardown Execution 532 533 ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} 534 Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} 535 536 # Reboot BMC and verify persistency. 537 OBMC Reboot (off) 538 Redfish.Login 539 FOR ${ip} IN @{test_ipv4_addresses} 540 Verify IP And Netmask On BMC ${ip} ${test_subnet_mask} 541 END 542 543 544Configure And Verify Multiple IPv4 Addresses 545 [Documentation] Configure multiple IPv4 addresses and verify. 546 [Tags] Configure_And_Verify_Multiple_IPv4_Addresse 547 [Teardown] Run Keywords 548 ... Delete IP Address ${test_ipv4_addr} AND Delete IP Address ${test_ipv4_addr2} 549 ... AND Test Teardown Execution 550 551 ${ip1}= Create dictionary Address=${test_ipv4_addr} 552 ... SubnetMask=255.255.0.0 Gateway=${test_gateway} 553 ${ip2}= Create dictionary Address=${test_ipv4_addr2} 554 ... SubnetMask=255.255.252.0 Gateway=${test_gateway} 555 556 ${empty_dict}= Create Dictionary 557 ${patch_list}= Create List 558 ${network_configurations}= Get Network Configuration 559 ${num_entries}= Get Length ${network_configurations} 560 561 FOR ${INDEX} IN RANGE 0 ${num_entries} 562 Append To List ${patch_list} ${empty_dict} 563 END 564 565 # We need not check for existence of IP on BMC while adding. 566 Append To List ${patch_list} ${ip1} ${ip2} 567 ${payload}= Create Dictionary IPv4StaticAddresses=${patch_list} 568 ${active_channel_config}= Get Active Channel Config 569 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 570 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{payload} 571 572 # Note: Network restart takes around 15-18s after patch request processing. 573 Sleep ${NETWORK_TIMEOUT}s 574 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 575 Verify IP On BMC ${test_ipv4_addr} 576 Verify IP On BMC ${test_ipv4_addr2} 577 578 579Config Multiple DNS Servers And Check Persistency 580 [Documentation] Config multiple DNS and check persistency. 581 [Tags] Config_Multiple_DNS_Servers_And_Check_Persistency 582 [Setup] DNS Test Setup Execution 583 [Teardown] Run Keywords 584 ... Configure Static Name Servers AND Test Teardown Execution 585 586 @{list_name_servers}= Create List 10.5.5.10 10.20.5.10 10.5.6.7 587 Configure Static Name Servers ${list_name_servers} 588 589 # Reboot BMC and verify persistency. 590 OBMC Reboot (off) 591 Redfish.Login 592 Verify CLI and Redfish Nameservers 593 594*** Keywords *** 595 596Test Setup Execution 597 [Documentation] Test setup execution. 598 599 Redfish.Login 600 601 @{network_configurations}= Get Network Configuration 602 Set Test Variable @{network_configurations} 603 604 # Get BMC IP address and prefix length. 605 ${ip_data}= Get BMC IP Info 606 Set Test Variable ${ip_data} 607 608 609Verify Netmask On BMC 610 [Documentation] Verify netmask on BMC. 611 [Arguments] ${netmask} 612 613 # Description of the argument(s): 614 # netmask netmask value to be verified. 615 616 ${prefix_length}= Netmask Prefix Length ${netmask} 617 618 Should Contain Match ${ip_data} */${prefix_length} 619 ... msg=Prefix length does not exist. 620 621Verify IP And Netmask On BMC 622 [Documentation] Verify IP and netmask on BMC. 623 [Arguments] ${ip} ${netmask} 624 625 # Description of the argument(s): 626 # ip IP address to be verified. 627 # netmask netmask value to be verified. 628 629 ${prefix_length}= Netmask Prefix Length ${netmask} 630 @{ip_data}= Get BMC IP Info 631 632 ${ip_with_netmask}= Catenate ${ip}/${prefix_length} 633 Should Contain ${ip_data} ${ip_with_netmask} 634 ... msg=IP and netmask pair does not exist. 635 636Validate Hostname On BMC 637 [Documentation] Verify that the hostname read via Redfish is the same as the 638 ... hostname configured on system. 639 [Arguments] ${hostname} 640 641 # Description of argument(s): 642 # hostname A hostname value which is to be compared to the hostname 643 # configured on system. 644 645 ${sys_hostname}= Get BMC Hostname 646 Should Be Equal ${sys_hostname} ${hostname} 647 ... ignore_case=True msg=Hostname does not exist. 648 649Test Teardown Execution 650 [Documentation] Test teardown execution. 651 652 FFDC On Test Case Fail 653 Redfish.Logout 654 655Clear IP Settings On Fail 656 [Documentation] Clear IP settings on fail. 657 [Arguments] ${ip} 658 659 # Description of argument(s): 660 # ip IP address to be deleted. 661 662 Run Keyword If '${TEST STATUS}' == 'FAIL' 663 ... Delete IP Address ${ip} 664 665 Test Teardown Execution 666 667Verify CLI and Redfish Nameservers 668 [Documentation] Verify that nameservers obtained via Redfish do not 669 ... match those found in /etc/resolv.conf. 670 671 ${active_channel_config}= Get Active Channel Config 672 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 673 674 ${redfish_nameservers}= Redfish.Get Attribute 675 ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers 676 ${resolve_conf_nameservers}= CLI Get Nameservers 677 Rqprint Vars redfish_nameservers resolve_conf_nameservers 678 679 # Check that the 2 lists are equivalent. 680 ${match}= Evaluate set($redfish_nameservers) == set($resolve_conf_nameservers) 681 Should Be True ${match} 682 ... The nameservers obtained via Redfish do not match those found in /etc/resolv.conf. 683 684 685Configure Static Name Servers 686 [Documentation] Configure DNS server on BMC. 687 [Arguments] ${static_name_servers}=${original_nameservers} 688 ... ${valid_status_codes}=${HTTP_OK} 689 690 # Description of the argument(s): 691 # static_name_servers A list of static name server IPs to be 692 # configured on the BMC. 693 694 ${active_channel_config}= Get Active Channel Config 695 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 696 697 ${type} = Evaluate type($static_name_servers).__name__ 698 ${static_name_servers}= Set Variable If '${type}'=='str' 699 ... '${static_name_servers}' ${static_name_servers} 700 701 # Currently BMC is sending 500 response code instead of 400 for invalid scenarios. 702 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 703 ... body={'StaticNameServers': ${static_name_servers}} 704 ... valid_status_codes=[${valid_status_codes}, ${HTTP_INTERNAL_SERVER_ERROR}] 705 706 # Patch operation takes 1 to 3 seconds to set new value. 707 Sleep 3s 708 709 # Check if newly added DNS server is configured on BMC. 710 ${cli_nameservers}= CLI Get Nameservers 711 ${cmd_status}= Run Keyword And Return Status 712 ... List Should Contain Sub List ${cli_nameservers} ${static_name_servers} 713 714 Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 715 ... Should Be True ${cmd_status} == ${True} 716 ... ELSE Should Be True ${cmd_status} == ${False} 717 718Delete Static Name Servers 719 [Documentation] Delete static name servers. 720 721 Configure Static Name Servers static_name_servers=@{EMPTY} 722 723 # Check if all name servers deleted on BMC. 724 ${nameservers}= CLI Get Nameservers 725 Should Be Empty ${nameservers} 726 727DNS Test Setup Execution 728 [Documentation] Do DNS test setup execution. 729 730 Redfish.Login 731 732 ${active_channel_config}= Get Active Channel Config 733 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 734 735 ${original_nameservers}= Redfish.Get Attribute 736 ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers 737 738 Rprint Vars original_nameservers 739 # Set suite variables to trigger restoration during teardown. 740 Set Suite Variable ${original_nameservers} 741 742Suite Setup Execution 743 [Documentation] Do suite setup execution. 744 745 ${test_gateway}= Get BMC Default Gateway 746 Set Suite Variable ${test_gateway} 747 748Update IP Address 749 [Documentation] Update IP address of BMC. 750 [Arguments] ${ip} ${new_ip} ${netmask} ${gw_ip} ${valid_status_codes}=${HTTP_OK} 751 752 # Description of argument(s): 753 # ip IP address to be replaced (e.g. "10.7.7.7"). 754 # new_ip New IP address to be configured. 755 # netmask Netmask value. 756 # gw_ip Gateway IP address. 757 # valid_status_codes Expected return code from patch operation 758 # (e.g. "200"). See prolog of rest_request 759 # method in redfish_plus.py for details. 760 761 ${empty_dict}= Create Dictionary 762 ${patch_list}= Create List 763 ${ip_data}= Create Dictionary Address=${new_ip} SubnetMask=${netmask} Gateway=${gw_ip} 764 765 # Find the position of IP address to be modified. 766 @{network_configurations}= Get Network Configuration 767 FOR ${network_configuration} IN @{network_configurations} 768 Run Keyword If '${network_configuration['Address']}' == '${ip}' 769 ... Append To List ${patch_list} ${ip_data} 770 ... ELSE Append To List ${patch_list} ${empty_dict} 771 END 772 773 ${ip_found}= Run Keyword And Return Status List Should Contain Value 774 ... ${patch_list} ${ip_data} msg=${ip} does not exist on BMC 775 Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC 776 777 # Run patch command only if given IP is found on BMC 778 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 779 780 Redfish.patch ${REDFISH_NW_ETH0_URI} body=&{data} valid_status_codes=[${valid_status_codes}] 781 782 # Note: Network restart takes around 15-18s after patch request processing. 783 Sleep ${NETWORK_TIMEOUT}s 784 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 785 786 Verify IP On BMC ${new_ip} 787 Validate Network Config On BMC 788 789Configure Multiple Static IPv4 Addresses 790 [Documentation] Configure multiple static ipv4 address via Redfish and verify. 791 [Arguments] ${ip_addreses} ${subnet_mask} ${gateway} 792 793 # Description of argument(s): 794 # ip_addreses A list of IP addresses to be added (e.g.["10.7.7.7"]). 795 # subnet_mask Subnet mask for the IP to be added (e.g. "255.255.0.0"). 796 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 797 798 FOR ${ip} IN @{ip_addreses} 799 Add IP Address ${ip} ${subnet_mask} ${gateway} 800 END 801 Validate Network Config On BMC 802 803 804Delete Multiple Static IPv4 Addresses 805 [Documentation] Delete multiple static ipv4 address via Redfish. 806 [Arguments] ${ip_addreses} 807 808 # Description of argument(s): 809 # ip_addreses A list of IP addresses to be deleted (e.g.["10.7.7.7"]). 810 811 FOR ${ip} IN @{ip_addreses} 812 Delete IP Address ${ip} 813 END 814 Validate Network Config On BMC 815