1*** Settings ***
2Documentation  Network interface IPv6 configuration and verification
3               ...  tests.
4
5Resource       ../../lib/bmc_redfish_resource.robot
6Resource       ../../lib/openbmc_ffdc.robot
7Resource       ../../lib/bmc_ipv6_utils.robot
8Library        ../../lib/bmc_network_utils.py
9Library        Collections
10
11Test Setup     Test Setup Execution
12Test Teardown  Test Teardown Execution
13Suite Setup    Suite Setup Execution
14
15
16*** Variables ***
17${test_ipv6_addr}          2001:db8:3333:4444:5555:6666:7777:8888
18${test_ipv6_invalid_addr}  2001:db8:3333:4444:5555:6666:7777:JJKK
19
20# Valid prefix length is a intiger ranges from 1 to 128.
21${test_prefix_lenght}     64
22
23
24*** Test Cases ***
25
26Get IPv6 Address And Verify
27    [Documentation]  Get IPv6 Address And Verify.
28    [Tags]  Get_IPv6_Address_And_Verify
29
30    FOR  ${ipv6_network_configuration}  IN  @{ipv6_network_configurations}
31      Verify IPv6 On BMC  ${ipv6_network_configuration['Address']}
32    END
33
34
35Get PrefixLength And Verify
36    [Documentation]  Get IPv6 prefix length and verify.
37    [Tags]  Get_PrefixLength_And_Verify
38
39    FOR  ${ipv6_network_configuration}  IN  @{ipv6_network_configurations}
40      Verify IPv6 On BMC  ${ipv6_network_configuration['PrefixLength']}
41    END
42
43
44Get IPv6 Default Gateway And Verify
45    [Documentation]  Get IPv6 default gateway and verify.
46    [Tags]  Get_IPv6_Default_Gateway_And_Verify
47
48    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}
49    ${ipv6_gateway}=  Get From Dictionary  ${resp.dict}  IPv6DefaultGateway
50    Verify IPv6 Default Gateway On BMC  ${ipv6_gateway}
51
52
53Verify All Configured IPv6 And PrefixLength On BMC
54    [Documentation]  Verify IPv6 address and its prefix length on BMC.
55    [Tags]  Verify_All_Configured_IPv6_And_PrefixLength_On_BMC
56
57    FOR  ${ipv6_network_configuration}  IN  @{ipv6_network_configurations}
58      Verify IPv6 And PrefixLength On BMC  ${ipv6_network_configuration['Address']}
59      ...  ${ipv6_network_configuration['PrefixLength']}
60    END
61
62
63Configure IPv6 Address And Verify
64    [Documentation]  Configure IPv6 address and verify.
65    [Tags]  Configure_IPv6_Address_And_Verify
66    [Template]  Configure IPv6 Address On BMC
67
68
69    # IPv6 address     Prefix length
70    ${test_ipv6_addr}  ${test_prefix_length}
71
72
73*** Keywords ***
74
75Suite Setup Execution
76    [Documentation]  Do suite setup execution.
77
78    ${active_channel_config}=  Get Active Channel Config
79    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
80
81    Set Suite variable  ${ethernet_interface}
82
83
84Test Setup Execution
85    [Documentation]  Test setup execution.
86
87    Redfish.Login
88
89    @{ipv6_network_configurations}=  Get IPv6 Network Configuration
90    Set Test Variable  @{ipv6_network_configurations}
91
92    # Get BMC IPv6 address and prefix length.
93    ${ipv6_data}=  Get BMC IPv6 Info
94    Set Test Variable  ${ipv6_data}
95
96
97Test Teardown Execution
98    [Documentation]  Test teardown execution.
99
100    FFDC On Test Case Fail
101    Redfish.Logout
102
103
104Get IPv6 Network Configuration
105    [Documentation]  Get Ipv6 network configuration.
106    # Sample output:
107    # {
108    #  "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0",
109    #  "@odata.type": "#EthernetInterface.v1_4_1.EthernetInterface",
110    #   "DHCPv4": {
111    #    "DHCPEnabled": false,
112    #    "UseDNSServers": false,
113    #    "UseDomainName": true,
114    #    "UseNTPServers": false
115    #  },
116    #  "DHCPv6": {
117    #    "OperatingMode": "Disabled",
118    #    "UseDNSServers": false,
119    #    "UseDomainName": true,
120    #    "UseNTPServers": false
121    #  },
122    #  "Description": "Management Network Interface",
123    #  "FQDN": "localhost",
124    #  "HostName": "localhost",
125    #  "IPv4Addresses": [
126    #    {
127    #      "Address": "xx.xx.xx.xx",
128    #      "AddressOrigin": "Static",
129    #      "Gateway": "xx.xx.xx.1",
130    #      "SubnetMask": "xx.xx.xx.0"
131    #    },
132    #    {
133    #      "Address": "169.254.xx.xx",
134    #      "AddressOrigin": "IPv4LinkLocal",
135    #      "Gateway": "0.0.0.0",
136    #      "SubnetMask": "xx.xx.0.0"
137    #    },
138    #  ],
139    #  "IPv4StaticAddresses": [
140    #    {
141    #      "Address": "xx.xx.xx.xx",
142    #      "AddressOrigin": "Static",
143    #      "Gateway": "xx.xx.xx.1",
144    #      "SubnetMask": "xx.xx.0.0"
145    #    }
146    # }
147    #  ],
148    #  "IPv6AddressPolicyTable": [],
149    #  "IPv6Addresses": [
150    #    {
151    #      "Address": "fe80::xxxx:xxxx:xxxx:xxxx",
152    #      "AddressOrigin": "LinkLocal",
153    #      "AddressState": null,
154    #      "PrefixLength": xx
155    #    }
156    #  ],
157    #  "IPv6DefaultGateway": "",
158    #  "IPv6StaticAddresses": [
159    #    { "Address": "xxxx:xxxx:xxxx:xxxx::xxxx",
160    #      "AddressOrigin": "Static",
161    #      "AddressState": null,
162    #      "PrefixLength": xxx
163    #    }
164    #  ],
165    #  "Id": "eth0",
166    #  "InterfaceEnabled": true,
167    #  "LinkStatus": "LinkUp",
168    #  "MACAddress": "xx:xx:xx:xx:xx:xx",
169    #  "Name": "Manager Ethernet Interface",
170    #  "NameServers": [],
171    #  "SpeedMbps": 0,
172    #  "StaticNameServers": [],
173    #  "Status": {
174    #    "Health": "OK",
175    #    "HealthRollup": "OK",
176    #    "State": "Enabled"
177    #  },
178    #  "VLANs": {
179    #    "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0/VLANs"
180
181
182    ${active_channel_config}=  Get Active Channel Config
183    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']}
184
185    @{ipv6_network_configurations}=  Get From Dictionary  ${resp.dict}  IPv6StaticAddresses
186    [Return]  @{ipv6_network_configurations}
187
188
189Verify IPv6 And PrefixLength
190    [Documentation]  Verify IPv6 address and prefix length on BMC.
191    [Arguments]  ${ipv6_addr}  ${prefix_len}
192
193    # Description of the argument(s):
194    # ipv6_addr   IPv6 address to be verified.
195    # prefix_len  PrefixLength value to be verified.
196
197    # Catenate IPv6 address and its prefix length.
198    ${ipv6_with_prefix}=  Catenate  ${ipv6_addr}/${prefix_len}
199
200    # Get IPv6 address details on BMC using IP command.
201    @{ip_data}=  Get BMC IPv6 Info
202
203    # Verify if IPv6 and prefix length is configured on BMC.
204
205    Should Contain  ${ip_data}  ${ipv6_with_prefix}
206    ...  msg=IPv6 and prefix length pair does not exist.
207
208
209Configure IPv6 Address On BMC
210    [Documentation]  Add IPv6 Address on BMC.
211    [Arguments]  ${ipv6_addr}  ${prefix_len}  ${valid_status_codes}=${HTTP_OK}
212
213    # Description of argument(s):
214    # ipv6_addr           IPv6 address to be added (e.g. "2001:EEEE:2222::2022").
215    # prefix_len          Prefix length for the IPv6 to be added
216    #                     (e.g. "64").
217    # valid_status_codes  Expected return code from patch operation
218    #                     (e.g. "200").
219
220    ${empty_dict}=  Create Dictionary
221    ${ipv6_data}=  Create Dictionary  Address=${ipv6_addr}
222    ...  PrefixLength=${prefix_len}
223
224    ${patch_list}=  Create List
225
226    # Get existing static IPv6 configurations on BMC.
227    ${ipv6_network_configurations}=  Get IPv6 Network Configuration
228    ${num_entries}=  Get Length  ${ipv6_network_configurations}
229
230    FOR  ${INDEX}  IN RANGE  0  ${num_entries}
231      Append To List  ${patch_list}  ${empty_dict}
232    END
233
234    ${valid_status_codes}=  Run Keyword If  '${valid_status_codes}' == '${HTTP_OK}'
235    ...  Set Variable   ${HTTP_OK},${HTTP_NO_CONTENT}
236    ...  ELSE  Set Variable  ${valid_status_codes}
237
238    # We need not check for existence of IPv6 on BMC while adding.
239    Append To List  ${patch_list}  ${ipv6_data}
240    ${data}=  Create Dictionary  IPv6StaticAddresses=${patch_list}
241
242    ${active_channel_config}=  Get Active Channel Config
243    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
244
245    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
246    ...  valid_status_codes=[${valid_status_codes}]
247
248    Return From Keyword If  '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}'
249
250    # Note: Network restart takes around 15-18s after patch request processing.
251    Sleep  ${NETWORK_TIMEOUT}s
252    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
253
254    Verify IPv6 And PrefixLength  ${ipv6_addr}  ${prefix_len}
255
256    # Verify if existing static IPv6 addresses still exist.
257    FOR  ${ipv6_network_configuration}  IN  @{ipv6_network_configurations}
258      Verify IPv6 On BMC  ${ipv6_network_configuration['Address']}
259    END
260
261    Validate IPv6 Network Config On BMC
262
263
264Validate IPv6 Network Config On BMC
265    [Documentation]  Check that IPv6 network info obtained via redfish matches info
266    ...              obtained via CLI.
267    @{network_configurations}=  Get IPv6 Network Configuration
268    ${ipv6_data}=  Get BMC IPv6 Info
269    FOR  ${ipv6_network_configuration}  IN  @{ipv6_network_configurations}
270      Should Contain Match  ${ipv6_data}  ${ipv6_network_configuration['Address']}/*
271      ...  msg=IPv6 address does not exist.
272    END
273
274