1*** Settings *** 2Documentation Network interface IPv6 configuration and verification 3 ... tests. 4 5Resource ../../lib/bmc_redfish_resource.robot 6Resource ../../lib/openbmc_ffdc.robot 7Resource ../../lib/bmc_ipv6_utils.robot 8Resource ../../lib/external_intf/vmi_utils.robot 9Resource ../../lib/bmc_network_utils.robot 10Library ../../lib/bmc_network_utils.py 11Library Collections 12Library Process 13 14Test Setup Test Setup Execution 15Test Teardown Test Teardown Execution 16Suite Setup Suite Setup Execution 17Suite Teardown Redfish.Logout 18 19Test Tags BMC_IPv6 20 21*** Variables *** 22${test_ipv6_addr} 2001:db8:3333:4444:5555:6666:7777:8888 23${test_ipv6_invalid_addr} 2001:db8:3333:4444:5555:6666:7777:JJKK 24${test_ipv6_addr1} 2001:db8:3333:4444:5555:6666:7777:9999 25${invalid_hexadec_ipv6} x:x:x:x:x:x:10.5.5.6 26${ipv6_multi_short} 2001::33::111 27# Valid prefix length is a integer ranges from 1 to 128. 28${test_prefix_length} 64 29${ipv6_gw_addr} 2002:903:15F:32:9:3:32:1 30${prefix_length_def} None 31${invalid_staticv6_gateway} 9.41.164.1 32${new_mac_addr} AA:E2:84:14:28:79 33${linklocal_addr_format} fe80::[0-9a-f:]+$ 34${link_local_addr} fe80:: 35${link_local_prefix_len} 10 36${ipv6_leading_zero} 2001:0022:0033::0111 37${ipv6_firsthextet_zero} 2001:0022:1133::1111 38${ipv6_eliminate_zero} 2001:22:33::111 39${ipv6_eliminate_zero1} 2001:22:1133::1111 40${ipv6_contigeous_zero} 2001:0022:0000:0000:1:2:3:8 41${ipv6_zero_compression} 2001:22::1:2:3:8 42 43*** Test Cases *** 44 45Get IPv6 Address And Verify 46 [Documentation] Get IPv6 Address And Verify. 47 [Tags] Get_IPv6_Address_And_Verify 48 49 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 50 Verify IPv6 On BMC ${ipv6_network_configuration['Address']} 51 END 52 53 54Get PrefixLength And Verify 55 [Documentation] Get IPv6 prefix length and verify. 56 [Tags] Get_PrefixLength_And_Verify 57 58 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 59 Verify IPv6 On BMC ${ipv6_network_configuration['PrefixLength']} 60 END 61 62 63Get IPv6 Default Gateway And Verify 64 [Documentation] Get IPv6 default gateway and verify. 65 [Tags] Get_IPv6_Default_Gateway_And_Verify 66 67 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 68 ${ipv6_gateway}= Get From Dictionary ${resp.dict} IPv6DefaultGateway 69 Verify IPv6 Default Gateway On BMC ${ipv6_gateway} 70 71 72Verify All Configured IPv6 And PrefixLength On BMC 73 [Documentation] Verify IPv6 address and its prefix length on BMC. 74 [Tags] Verify_All_Configured_IPv6_And_PrefixLength_On_BMC 75 76 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 77 Verify IPv6 And PrefixLength ${ipv6_network_configuration['Address']} 78 ... ${ipv6_network_configuration['PrefixLength']} 79 END 80 81 82Configure IPv6 Address And Verify 83 [Documentation] Configure IPv6 address and verify. 84 [Tags] Configure_IPv6_Address_And_Verify 85 [Teardown] Run Keywords 86 ... Delete IPv6 Address ${test_ipv6_addr} AND Test Teardown Execution 87 [Template] Configure IPv6 Address On BMC 88 89 90 # IPv6 address Prefix length 91 ${test_ipv6_addr} ${test_prefix_length} 92 93 94Configure IPv6 Address On BMC And Verify On Both Interfaces 95 [Documentation] Configure IPv6 address on both interfaces and verify. 96 [Tags] Configure_IPv6_Address_On_BMC_And_Verify_On_Both_Interfaces 97 [Teardown] Run Keywords 98 ... Delete IPv6 Address ${test_ipv6_addr} ${1} 99 ... AND Delete IPv6 Address ${test_ipv6_addr1} ${2} 100 ... AND Test Teardown Execution 101 102 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} ${None} ${1} 103 Configure IPv6 Address On BMC ${test_ipv6_addr1} ${test_prefix_length} ${None} ${2} 104 105 Verify All The Addresses Are Intact ${1} 106 Verify All The Addresses Are Intact ${2} 107 ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list} 108 109 # Verify Static IPv6 on eth0 110 @{ipv6_addressorigin_list} ${ipv6_static_addr}= 111 ... Get Address Origin List And Address For Type Static ${1} 112 Should Contain ${ipv6_addressorigin_list} Static 113 Should Not Be Empty ${ipv6_static_addr} msg=${ipv6_static_addr} address is not present 114 115 # Verify Static IPv6 on eth1 116 @{ipv6_addressorigin_list} ${ipv6_static_addr}= 117 ... Get Address Origin List And Address For Type Static ${2} 118 Should Contain ${ipv6_addressorigin_list} Static 119 Should Not Be Empty ${ipv6_static_addr} msg=${ipv6_static_addr} address is not present 120 121 122Delete IPv6 Address And Verify 123 [Documentation] Delete IPv6 address and verify. 124 [Tags] Delete_IPv6_Address_And_Verify 125 126 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 127 128 Delete IPv6 Address ${test_ipv6_addr} 129 130 131Modify IPv6 Address And Verify 132 [Documentation] Modify IPv6 address and verify. 133 [Tags] Modify_IPv6_Address_And_Verify 134 [Teardown] Run Keywords 135 ... Delete IPv6 Address ${test_ipv6_addr1} AND Test Teardown Execution 136 137 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 138 139 Modify IPv6 Address ${test_ipv6_addr} ${test_ipv6_addr1} ${test_prefix_length} 140 141 142Verify Persistency Of IPv6 After BMC Reboot 143 [Documentation] Verify persistency of IPv6 after BMC reboot. 144 [Tags] Verify_Persistency_Of_IPv6_After_BMC_Reboot 145 [Teardown] Run Keywords 146 ... Delete IPv6 Address ${test_ipv6_addr} AND Test Teardown Execution 147 148 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 149 150 Redfish OBMC Reboot (off) stack_mode=skip 151 152 # Verifying persistency of IPv6. 153 Verify IPv6 On BMC ${test_ipv6_addr} 154 155 156Enable SLAAC On BMC And Verify 157 [Documentation] Enable SLAAC on BMC and verify. 158 [Tags] Enable_SLAAC_On_BMC_And_Verify 159 160 Set SLAAC Configuration State And Verify ${True} 161 162 163Enable DHCPv6 Property On BMC And Verify 164 [Documentation] Enable DHCPv6 property on BMC and verify. 165 [Tags] Enable_DHCPv6_Property_On_BMC_And_Verify 166 167 Set And Verify DHCPv6 Property Enabled 168 169 170Disable DHCPv6 Property On BMC And Verify 171 [Documentation] Disable DHCPv6 property on BMC and verify. 172 [Tags] Disable_DHCPv6_Property_On_BMC_And_Verify 173 174 Set And Verify DHCPv6 Property Disabled 175 176 177Verify Persistency Of DHCPv6 On Reboot 178 [Documentation] Verify persistency of DHCPv6 property on reboot. 179 [Tags] Verify_Persistency_Of_DHCPv6_On_Reboot 180 181 Set And Verify DHCPv6 Property Enabled 182 Redfish OBMC Reboot (off) stack_mode=skip 183 Verify DHCPv6 Property Enabled 184 185 186Verify Persistency Of DHCPv6 On BMC Reboot On Eth1 187 [Documentation] Verify persistency of DHCPv6 property and 188 ... all existing n/w configurations on BMC reboot on eth1. 189 [Tags] Verify_Persistency_Of_DHCPv6_On_BMC_Reboot_On_Eth1 190 [Setup] Set And Verify DHCPv6 Property Enabled ${2} 191 192 Redfish OBMC Reboot (off) stack_mode=skip 193 194 Verify DHCPv6 Property Enabled ${2} 195 196 Verify All The Addresses Are Intact ${1} 197 Verify All The Addresses Are Intact ${2} 198 ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list} 199 200 201Verify Persistency Of SLAAC On BMC Reboot On Eth0 202 [Documentation] Verify persistency of SLAAC property on reboot on eth0. 203 [Tags] Verify_Persistency_Of_SLAAC_On_BMC_Reboot_On_Eth0 204 205 Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${1} ${False} 206 Redfish OBMC Reboot (off) stack_mode=skip 207 Verify SLAAC Property ${True} 208 209 210Verify Persistency Of SLAAC On BMC Reboot On Eth1 211 [Documentation] Verify persistency of SLAAC property on reboot on eth1. 212 [Tags] Verify_Persistency_Of_SLAAC_On_BMC_Reboot_On_Eth1 213 214 Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${2} ${False} 215 Redfish OBMC Reboot (off) stack_mode=skip 216 Verify SLAAC Property ${True} ${2} 217 218 219Configure Invalid Static IPv6 And Verify 220 [Documentation] Configure invalid static IPv6 and verify. 221 [Tags] Configure_Invalid_Static_IPv6_And_Verify 222 [Template] Configure IPv6 Address On BMC 223 224 #invalid_ipv6 prefix length valid_status_code 225 ${ipv4_hexword_addr} ${test_prefix_length} ${HTTP_BAD_REQUEST} 226 ${invalid_hexadec_ipv6} ${test_prefix_length} ${HTTP_BAD_REQUEST} 227 ${ipv6_multi_short} ${test_prefix_length} ${HTTP_BAD_REQUEST} 228 229 230Configure IPv6 Static Default Gateway And Verify 231 [Documentation] Configure IPv6 static default gateway and verify. 232 [Tags] Configure_IPv6_Static_Default_Gateway_And_Verify 233 [Template] Configure IPv6 Static Default Gateway On BMC 234 235 # static_def_gw prefix length valid_status_code 236 ${ipv6_gw_addr} ${prefix_length_def} ${HTTP_OK} 237 ${invalid_staticv6_gateway} ${test_prefix_length} ${HTTP_BAD_REQUEST} 238 239 240Modify Static Default Gateway And Verify 241 [Documentation] Modify static default gateway and verify. 242 [Tags] Modify_Static_Default_Gateway_And_Verify 243 [Setup] Configure IPv6 Static Default Gateway On BMC ${ipv6_gw_addr} ${prefix_length_def} 244 245 Modify IPv6 Static Default Gateway On BMC ${test_ipv6_addr1} ${prefix_length_def} ${HTTP_OK} ${ipv6_gw_addr} 246 247 248Delete IPv6 Static Default Gateway And Verify 249 [Documentation] Delete IPv6 static default gateway and verify. 250 [Tags] Delete_IPv6_Static_Default_Gateway_And_Verify 251 [Setup] Configure IPv6 Static Default Gateway On BMC ${ipv6_gw_addr} ${prefix_length_def} 252 253 Delete IPv6 Static Default Gateway ${ipv6_gw_addr} 254 255 256Verify Coexistence Of Linklocalv6 And Static IPv6 On BMC 257 [Documentation] Verify linklocalv6 And static IPv6 both exist. 258 [Tags] Verify_Coexistence_Of_Linklocalv6_And_Static_IPv6_On_BMC 259 [Setup] Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 260 [Teardown] Delete IPv6 Address ${test_ipv6_addr} 261 262 Check Coexistence Of Linklocalv6 And Static IPv6 263 264 265Verify IPv6 Linklocal Address Is In Correct Format 266 [Documentation] Verify linklocal address has network part as fe80 and 267 ... host part as EUI64. 268 [Tags] Verify_IPv6_Linklocal_Address_Is_In_Correct_Format 269 270 Check If Linklocal Address Is In Correct Format 271 272 273Verify BMC Gets SLAAC Address On Enabling SLAAC 274 [Documentation] On enabling SLAAC verify SLAAC address comes up. 275 [Tags] Verify_BMC_Gets_SLAAC_Address_On_Enabling_SLAAC 276 [Setup] Set SLAAC Configuration State And Verify ${False} 277 278 Set SLAAC Configuration State And Verify ${True} 279 Sleep ${NETWORK_TIMEOUT} 280 Check BMC Gets SLAAC Address 281 282 283Verify Enable And Disable SLAAC On Both Interfaces 284 [Documentation] Verify enable and disable SLAAC on both the interfaces. 285 [Tags] Verify_Enable_And_Disable_SLAAC_On_Both_Interfaces 286 [Setup] Get The Initial SLAAC Settings 287 [Template] Set And Verify SLAAC Property On Both Interfaces 288 [Teardown] Run Keywords Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1} 289 ... AND Set SLAAC Configuration State And Verify ${slaac_channel_2} [${HTTP_OK}] ${2} 290 291 # slaac_eth0 slaac_eth1 292 ${True} ${True} 293 ${True} ${False} 294 ${False} ${True} 295 ${False} ${False} 296 297 298Configure And Validate DHCPv6 Settings On Both Network Interfaces 299 [Documentation] Configure and validate the DHCPv6 enable/disable settings 300 ... on both network interfaces. 301 [Tags] Configure_And_Validate_DHCPv6_Settings_On_Both_Network_Interfaces 302 [Setup] Get The Initial DHCPv6 Settings 303 [Template] Set And Verify DHCPv6 Property On Both Interfaces 304 [Teardown] Run Keywords Set And Verify DHCPv6 Property ${dhcpv6_channel_1} ${1} AND 305 ... Set And Verify DHCPv6 Property ${dhcpv6_channel_2} ${2} 306 307 # DHCPv6_eth0 DHCPv6_eth1 308 Enabled Enabled 309 Enabled Disabled 310 Disabled Enabled 311 Disabled Disabled 312 313 314Verify Autoconfig Is Present On Ethernet Interface 315 [Documentation] Verify autoconfig is present on ethernet interface. 316 [Tags] Verify_Autoconfig_Is_Present_On_Ethernet_Interface 317 318 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 319 Should Contain ${resp.dict} StatelessAddressAutoConfig 320 321 322Verify Interface ID Of SLAAC And LinkLocal Addresses Are Same 323 [Documentation] Validate interface id of SLAAC and link-local addresses are same. 324 [Tags] Verify_Interface_ID_Of_SLAAC_And_LinkLocal_Addresses_Are_Same 325 326 @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal 327 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC 328 329 ${linklocal_interface_id}= Get Interface ID Of IPv6 ${ipv6_linklocal_addr} 330 ${slaac_interface_id}= Get Interface ID Of IPv6 ${ipv6_slaac_addr} 331 332 Should Be Equal ${linklocal_interface_id} ${slaac_interface_id} 333 334 335Verify Persistency Of Link Local IPv6 On BMC Reboot 336 [Documentation] Verify persistency of link local on BMC reboot. 337 [Tags] Verify_Persistency_Of_Link_Local_IPv6_On_BMC_Reboot 338 339 # Capturing the linklocal before reboot. 340 @{ipv6_address_origin_list} ${linklocal_addr_before_reboot}= 341 ... Get Address Origin List And Address For Type LinkLocal 342 343 # Rebooting BMC. 344 Redfish OBMC Reboot (off) stack_mode=skip 345 346 @{ipv6_address_origin_list} ${linklocal_addr_after_reboot}= 347 ... Get Address Origin List And Address For Type LinkLocal 348 349 # Verifying the linklocal must be the same before and after reboot. 350 Should Be Equal ${linklocal_addr_before_reboot} ${linklocal_addr_after_reboot} 351 ... msg=IPv6 Linklocal address has changed after reboot. 352 353 354Modify MAC and Verify BMC Reinitializing Linklocal 355 [Documentation] Modify MAC and verify BMC reinitializing linklocal. 356 [Tags] Modify_MAC_and_Verify_BMC_Reinitializing_Linklocal 357 [Teardown] Configure MAC Settings ${original_address} 358 359 ${original_address}= Get BMC MAC Address 360 @{ipv6_addressorigin_list} ${ipv6_before_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal 361 362 # Modify MAC Address Of Ethernet Interface. 363 Configure MAC Settings ${new_mac_addr} 364 Sleep 30s 365 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 366 @{ipv6_addressorigin_list} ${ipv6_linklocal_after_addr}= Get Address Origin List And Address For Type LinkLocal 367 368 # Verify whether the linklocal has changed and is in the the correct format. 369 Check If Linklocal Address Is In Correct Format 370 Should Not Be Equal ${ipv6_before_linklocal_addr} ${ipv6_linklocal_after_addr} 371 372 373Add Multiple IPv6 Address And Verify 374 [Documentation] Add multiple IPv6 address and verify. 375 [Tags] Add_Multiple_IPv6_Address_And_Verify 376 [Teardown] Run Keywords 377 ... Delete IPv6 Address ${test_ipv6_addr} AND Delete IPv6 Address ${test_ipv6_addr1} 378 ... AND Test Teardown Execution 379 380 Configure Multiple IPv6 Address on BMC ${test_prefix_length} 381 382 383Verify Coexistence Of Static IPv6 And SLAAC On BMC 384 [Documentation] Verify static IPv6 And SLAAC both coexist. 385 [Tags] Verify_Coexistence_Of_Static_IPv6_And_SLAAC_On_BMC 386 [Setup] Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 387 Set SLAAC Configuration State And Verify ${True} 388 [Teardown] Delete IPv6 Address ${test_ipv6_addr} 389 390 Sleep ${NETWORK_TIMEOUT}s 391 392 Check Coexistence Of Static IPv6 And SLAAC 393 394 395Verify Coexistence Of Link Local And DHCPv6 On BMC 396 [Documentation] Verify link local And dhcpv6 both coexist. 397 [Tags] Verify_Coexistence_Of_Link_Local_And_DHCPv6_On_BMC 398 [Setup] Set DHCPv6 Property Enabled ${2} 399 400 Sleep ${NETWORK_TIMEOUT}s 401 402 Check Coexistence Of Link Local And DHCPv6 403 404 405Verify Coexistence Of Link Local And SLAAC On BMC 406 [Documentation] Verify link local And SLAAC both coexist. 407 [Tags] Verify_Coexistence_Of_Link_Local_And_SLAAC_On_BMC 408 [Setup] Set SLAAC Configuration State And Verify ${True} 409 410 Sleep ${NETWORK_TIMEOUT}s 411 412 Check Coexistence Of Link Local And SLAAC 413 414 415Verify Coexistence Of All IPv6 Type Addresses On BMC 416 [Documentation] Verify coexistence of link local, static, DHCPv6 and SLAAC ipv6 addresses. 417 [Tags] Verify_Coexistence_Of_All_IPv6_Type_Addresses_On_BMC 418 [Setup] Run Keywords Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 419 ... AND Get The Initial DHCPv6 Setting On Each Interface ${1} 420 ... AND Set And Verify DHCPv6 Property Enabled 421 ... AND Get The Initial SLAAC Setting On Each Interface ${1} 422 ... AND Set SLAAC Configuration State And Verify ${True} 423 [Teardown] Run Keywords Delete IPv6 Address ${test_ipv6_addr} 424 ... AND Set And Verify DHCPv6 Property ${dhcpv6_channel_1} ${1} 425 ... AND Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1} 426 427 Sleep ${NETWORK_TIMEOUT}s 428 429 # Verify link local, static, DHCPv6 and SLAAC ipv6 addresses coexist. 430 Verify The Coexistence Of The Address Type LinkLocal Static DHCPv6 SLAAC 431 432 433Configure Link Local IPv6 Address And Verify 434 [Documentation] Configure link local IPv6 address and verify. 435 [Tags] Configure_Link_Local_IPv6_Address_And_Verify 436 437 Configure IPv6 Address On BMC ${link_local_addr} ${link_local_prefix_len} 438 439 # Verify the address origin contains link local. 440 @{ipv6_address_origin_list} ${ipv6_link_local_addr}= 441 ... Get Address Origin List And Address For Type LinkLocal 442 443 ${count}= Evaluate ${ipv6_address_origin_list}.count("LinkLocal") 444 445 Should Be Equal As Integers ${count} 2 446 447 448Configure Valid IPv6 Address And Verify 449 [Documentation] Configure valid IPv6 address and verify it is getting added as expected format. 450 [Tags] Configure_Valid_IPv6_Address_And_Verify 451 [Teardown] Run Keywords 452 ... Delete IPv6 Address ${ipv6_zero_compression} 453 ... AND Delete IPv6 Address ${ipv6_eliminate_zero} 454 ... AND Delete IPv6 Address ${ipv6_eliminate_zero1} 455 ... AND Test Teardown Execution 456 [Template] Configure IPv6 Address On BMC 457 458 # IPv6 address prefix length IPv6 address verified. 459 ${ipv6_contigeous_zero} ${test_prefix_length} ${ipv6_zero_compression} 460 ${ipv6_firsthextet_zero} ${test_prefix_length} ${ipv6_eliminate_zero1} 461 ${ipv6_leading_zero} ${test_prefix_length} ${ipv6_eliminate_zero} 462 463 464Verify Coexistence Of IPv6 Addresses Type Combination On BMC 465 [Documentation] Verify coexistence of IPv6 addresses type combination on BMC. 466 [Tags] Verify_Coexistence_Of_IPv6_Addresses_Type_Combination_On_BMC 467 [Setup] Run Keywords 468 ... Get The Initial DHCPv6 Setting On Each Interface ${1} 469 ... AND Get The Initial SLAAC Setting On Each Interface ${1} 470 [Teardown] Run Keywords 471 ... Set And Verify DHCPv6 Property ${dhcpv6_channel_1} ${1} 472 ... AND Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1} 473 [Template] Verify IPv6 Addresses Coexist 474 475 # type1 type2. 476 Static DHCPv6 477 DHCPv6 SLAAC 478 SLAAC Static 479 Static Static 480 481 482Verify Eth0 Static IPv4 Functions Properly In The Presence Of DHCPv6 483 [Documentation] Verify eth0 static IPv4 functions properly in the presence of DHCPv6. 484 [Tags] Verify_Eth0_Static_IPv4_Functions_Properly_In_The_Presence_Of_DHCPv6 485 [Setup] Set And Verify DHCPv6 Property Enabled 486 487 # Verify that on enabling DHCPv6 other configurations are not impacted. 488 Sleep ${NETWORK_TIMEOUT} 489 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 490 491 Verify All The Addresses Are Intact ${1} 492 Verify All The Addresses Are Intact ${2} 493 ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list} 494 495 496*** Keywords *** 497 498Suite Setup Execution 499 [Documentation] Do suite setup execution. 500 501 Redfish.Login 502 ${active_channel_config}= Get Active Channel Config 503 Set Suite Variable ${active_channel_config} 504 505 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 506 507 Set Suite variable ${ethernet_interface} 508 509 # Get initial IPv4 and IPv6 addresses and address origins for eth0. 510 ${initial_ipv4_addressorigin_list} ${initial_ipv4_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses 511 ${initial_ipv6_addressorigin_list} ${initial_ipv6_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses 512 513 Set Suite Variable ${initial_ipv4_addressorigin_list} 514 Set Suite Variable ${initial_ipv4_addr_list} 515 Set Suite Variable ${initial_ipv6_addressorigin_list} 516 Set Suite Variable ${initial_ipv6_addr_list} 517 518 # Get initial IPv4 and IPv6 addresses and address origins for eth1. 519 ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list}= 520 ... Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses ${2} 521 ${eth1_initial_ipv6_addressorigin_list} ${eth1_initial_ipv6_addr_list}= 522 ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${2} 523 Set Suite Variable ${eth1_initial_ipv4_addressorigin_list} 524 Set Suite Variable ${eth1_initial_ipv4_addr_list} 525 Set Suite Variable ${eth1_initial_ipv6_addressorigin_list} 526 Set Suite Variable ${eth1_initial_ipv6_addr_list} 527 528 529Test Setup Execution 530 [Documentation] Test setup execution. 531 532 @{ipv6_network_configurations}= Get IPv6 Network Configuration 533 Set Test Variable @{ipv6_network_configurations} 534 535 # Get BMC IPv6 address and prefix length. 536 ${ipv6_data}= Get BMC IPv6 Info 537 Set Test Variable ${ipv6_data} 538 539 540Test Teardown Execution 541 [Documentation] Test teardown execution. 542 543 FFDC On Test Case Fail 544 545 546Get IPv6 Network Configuration 547 [Documentation] Get Ipv6 network configuration. 548 [Arguments] ${channel_number}=${CHANNEL_NUMBER} 549 550 # Description of argument(s): 551 # channel_number Channel number (1 - eth0 and 2 - eth1). 552 553 # Sample output: 554 # { 555 # "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0", 556 # "@odata.type": "#EthernetInterface.v1_4_1.EthernetInterface", 557 # "DHCPv4": { 558 # "DHCPEnabled": false, 559 # "UseDNSServers": false, 560 # "UseDomainName": true, 561 # "UseNTPServers": false 562 # }, 563 # "DHCPv6": { 564 # "OperatingMode": "Disabled", 565 # "UseDNSServers": false, 566 # "UseDomainName": true, 567 # "UseNTPServers": false 568 # }, 569 # "Description": "Management Network Interface", 570 # "FQDN": "localhost", 571 # "HostName": "localhost", 572 # "IPv4Addresses": [ 573 # { 574 # "Address": "xx.xx.xx.xx", 575 # "AddressOrigin": "Static", 576 # "Gateway": "xx.xx.xx.1", 577 # "SubnetMask": "xx.xx.xx.0" 578 # }, 579 # { 580 # "Address": "169.254.xx.xx", 581 # "AddressOrigin": "IPv4LinkLocal", 582 # "Gateway": "0.0.0.0", 583 # "SubnetMask": "xx.xx.0.0" 584 # }, 585 # ], 586 # "IPv4StaticAddresses": [ 587 # { 588 # "Address": "xx.xx.xx.xx", 589 # "AddressOrigin": "Static", 590 # "Gateway": "xx.xx.xx.1", 591 # "SubnetMask": "xx.xx.0.0" 592 # } 593 # } 594 # ], 595 # "IPv6AddressPolicyTable": [], 596 # "IPv6Addresses": [ 597 # { 598 # "Address": "fe80::xxxx:xxxx:xxxx:xxxx", 599 # "AddressOrigin": "LinkLocal", 600 # "AddressState": null, 601 # "PrefixLength": xx 602 # } 603 # ], 604 # "IPv6DefaultGateway": "", 605 # "IPv6StaticAddresses": [ 606 # { "Address": "xxxx:xxxx:xxxx:xxxx::xxxx", 607 # "AddressOrigin": "Static", 608 # "AddressState": null, 609 # "PrefixLength": xxx 610 # } 611 # ], 612 # "Id": "eth0", 613 # "InterfaceEnabled": true, 614 # "LinkStatus": "LinkUp", 615 # "MACAddress": "xx:xx:xx:xx:xx:xx", 616 # "Name": "Manager Ethernet Interface", 617 # "NameServers": [], 618 # "SpeedMbps": 0, 619 # "StaticNameServers": [], 620 # "Status": { 621 # "Health": "OK", 622 # "HealthRollup": "OK", 623 # "State": "Enabled" 624 # }, 625 # "VLANs": { 626 # "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0/VLANs" 627 628 629 ${active_channel_config}= Get Active Channel Config 630 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']} 631 632 @{ipv6_network_configurations}= Get From Dictionary ${resp.dict} IPv6StaticAddresses 633 RETURN @{ipv6_network_configurations} 634 635 636Verify IPv6 And PrefixLength 637 [Documentation] Verify IPv6 address and prefix length on BMC. 638 [Arguments] ${ipv6_addr} ${prefix_len} 639 640 # Description of the argument(s): 641 # ipv6_addr IPv6 address to be verified. 642 # prefix_len PrefixLength value to be verified. 643 644 # Catenate IPv6 address and its prefix length. 645 ${ipv6_with_prefix}= Catenate ${ipv6_addr}/${prefix_len} 646 647 # Get IPv6 address details on BMC using IP command. 648 @{ip_data}= Get BMC IPv6 Info 649 650 # Verify if IPv6 and prefix length is configured on BMC. 651 652 Should Contain ${ip_data} ${ipv6_with_prefix} 653 ... msg=IPv6 and prefix length pair does not exist. 654 655Configure IPv6 Address On BMC 656 [Documentation] Add IPv6 Address on BMC. 657 [Arguments] ${ipv6_addr1} ${prefix_len} ${ipv6_addr2}=${None} 658 ... ${channel_number}=${CHANNEL_NUMBER} 659 ... ${valid_status_codes}=[${HTTP_OK},${HTTP_NO_CONTENT}] 660 661 # Description of argument(s): 662 # ipv6_addr1 IPv6 address to be added (e.g. "2001:0022:0033::0111"). 663 # ipv6_addr2 IPv6 address to be Verified (e.g. "2001:22:33::111"). 664 # prefix_len Prefix length for the IPv6 to be added 665 # (e.g. "64"). 666 # channel_number Channel number (1 - eth0 and 2 - eth1). 667 # valid_status_codes Expected return code from patch operation 668 # (e.g. "200"). 669 670 ${prefix_length}= Convert To Integer ${prefix_len} 671 ${empty_dict}= Create Dictionary 672 ${ipv6_data}= Create Dictionary Address=${ipv6_addr1} 673 ... PrefixLength=${prefix_length} 674 675 ${patch_list}= Create List 676 677 # Get existing static IPv6 configurations on BMC. 678 ${ipv6_network_configurations}= Get IPv6 Network Configuration ${channel_number} 679 ${num_entries}= Get Length ${ipv6_network_configurations} 680 681 FOR ${INDEX} IN RANGE 0 ${num_entries} 682 Append To List ${patch_list} ${empty_dict} 683 END 684 685 # We need not check for existence of IPv6 on BMC while adding. 686 Append To List ${patch_list} ${ipv6_data} 687 ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} 688 689 ${active_channel_config}= Get Active Channel Config 690 ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} 691 692 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 693 ... valid_status_codes=${valid_status_codes} 694 695 IF ${valid_status_codes} != [${HTTP_OK}, ${HTTP_NO_CONTENT}] 696 Fail msg=Static address not added correctly 697 END 698 699 # Note: Network restart takes around 15-18s after patch request processing. 700 Sleep ${NETWORK_TIMEOUT}s 701 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 702 703 # Verify ip address on CLI. 704 IF '${ipv6_addr2}' != '${None}' 705 Verify IPv6 And PrefixLength ${ipv6_addr2} ${prefix_len} 706 ELSE 707 Verify IPv6 And PrefixLength ${ipv6_addr1} ${prefix_len} 708 END 709 710 # Verify if existing static IPv6 addresses still exist. 711 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 712 Verify IPv6 On BMC ${ipv6_network_configuration['Address']} 713 END 714 715 #Verify redfish and CLI data matches. 716 Validate IPv6 Network Config On BMC 717 718 719Configure Multiple IPv6 Address on BMC 720 [Documentation] Add multiple IPv6 address on BMC. 721 [Arguments] ${prefix_len} 722 ... ${valid_status_codes}=[${HTTP_OK},${HTTP_NO_CONTENT}] 723 724 # Description of argument(s): 725 # prefix_len Prefix length for the IPv6 to be added 726 # (e.g. "64"). 727 # valid_status_codes Expected return code from patch operation 728 # (e.g. "200"). 729 730 ${ipv6_list}= Create List ${test_ipv6_addr} ${test_ipv6_addr1} 731 ${prefix_length}= Convert To Integer ${prefix_len} 732 ${empty_dict}= Create Dictionary 733 ${patch_list}= Create List 734 735 # Get existing static IPv6 configurations on BMC. 736 ${ipv6_network_configurations}= Get IPv6 Network Configuration 737 ${num_entries}= Get Length ${ipv6_network_configurations} 738 739 FOR ${INDEX} IN RANGE 0 ${num_entries} 740 Append To List ${patch_list} ${empty_dict} 741 END 742 743 # We need not check for existence of IPv6 on BMC while adding. 744 FOR ${ipv6_addr} IN @{ipv6_list} 745 ${ipv6_data}= Create Dictionary Address=${ipv6_addr} PrefixLength=${prefix_length} 746 Append To List ${patch_list} ${ipv6_data} 747 END 748 ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} 749 750 ${active_channel_config}= Get Active Channel Config 751 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 752 753 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 754 ... valid_status_codes=${valid_status_codes} 755 756 IF ${valid_status_codes} != [${HTTP_OK}, ${HTTP_NO_CONTENT}] 757 Fail msg=Static address not added correctly 758 END 759 760 # Note: Network restart takes around 15-18s after patch request processing. 761 Sleep ${NETWORK_TIMEOUT}s 762 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 763 764 # Verify newly added ip address on CLI. 765 FOR ${ipv6_addr} IN @{ipv6_list} 766 Verify IPv6 And PrefixLength ${ipv6_addr} ${prefix_len} 767 END 768 769 # Verify if existing static IPv6 addresses still exist. 770 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 771 Verify IPv6 On BMC ${ipv6_network_configuration['Address']} 772 END 773 774 # Get the latest ipv6 network configurations. 775 @{ipv6_network_configurations}= Get IPv6 Network Configuration 776 777 # Verify newly added ip address on BMC. 778 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 779 Should Contain Match ${ipv6_list} ${ipv6_network_configuration['Address']} 780 END 781 782 Validate IPv6 Network Config On BMC 783 784 785Validate IPv6 Network Config On BMC 786 [Documentation] Check that IPv6 network info obtained via redfish matches info 787 ... obtained via CLI. 788 789 @{ipv6_network_configurations}= Get IPv6 Network Configuration 790 ${ipv6_data}= Get BMC IPv6 Info 791 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 792 Should Contain Match ${ipv6_data} ${ipv6_network_configuration['Address']}/* 793 ... msg=IPv6 address does not exist. 794 END 795 796 797Delete IPv6 Address 798 [Documentation] Delete IPv6 address of BMC. 799 [Arguments] ${ipv6_addr} 800 ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] 801 ... ${channel_number}=${CHANNEL_NUMBER} 802 803 # Description of argument(s): 804 # ipv6_addr IPv6 address to be deleted (e.g. "2001:1234:1234:1234::1234"). 805 # channel_number Channel number (1 - eth0 and 2 - eth1). 806 # valid_status_codes Expected return code from patch operation 807 # (e.g. "200"). See prolog of rest_request 808 # method in redfish_plus.py for details. 809 810 ${empty_dict}= Create Dictionary 811 ${patch_list}= Create List 812 813 @{ipv6_network_configurations}= Get IPv6 Network Configuration ${channel_number} 814 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 815 IF '${ipv6_network_configuration['Address']}' == '${ipv6_addr}' 816 Append To List ${patch_list} ${null} 817 ELSE 818 Append To List ${patch_list} ${empty_dict} 819 END 820 END 821 822 ${ip_found}= Run Keyword And Return Status List Should Contain Value 823 ... ${patch_list} ${null} msg=${ipv6_addr} does not exist on BMC 824 Pass Execution If ${ip_found} == ${False} ${ipv6_addr} does not exist on BMC 825 826 # Run patch command only if given IP is found on BMC 827 ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} 828 829 ${active_channel_config}= Get Active Channel Config 830 ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} 831 832 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 833 ... valid_status_codes=${valid_status_codes} 834 835 # Note: Network restart takes around 15-18s after patch request processing 836 Sleep ${NETWORK_TIMEOUT}s 837 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 838 839 # IPv6 address that is deleted should not be there on BMC. 840 ${delete_status}= Run Keyword And Return Status Verify IPv6 On BMC ${ipv6_addr} 841 IF '${valid_status_codes}' == '[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}]' 842 Should Be True '${delete_status}' == '${False}' 843 ELSE 844 Should Be True '${delete_status}' == '${True}' 845 END 846 847 Validate IPv6 Network Config On BMC 848 849 850Modify IPv6 Address 851 [Documentation] Modify and verify IPv6 address of BMC. 852 [Arguments] ${ipv6} ${new_ipv6} ${prefix_len} 853 ... ${valid_status_codes}=[${HTTP_OK}, ${HTTP_NO_CONTENT}] 854 855 # Description of argument(s): 856 # ipv6 IPv6 address to be replaced (e.g. "2001:AABB:CCDD::AAFF"). 857 # new_ipv6 New IPv6 address to be configured. 858 # prefix_len Prefix length value (Range 1 to 128). 859 # valid_status_codes Expected return code from patch operation 860 # (e.g. "200", "201"). 861 862 ${empty_dict}= Create Dictionary 863 ${patch_list}= Create List 864 ${prefix_length}= Convert To Integer ${prefix_len} 865 ${ipv6_data}= Create Dictionary 866 ... Address=${new_ipv6} PrefixLength=${prefix_length} 867 868 # Sample IPv6 network configurations: 869 # "IPv6AddressPolicyTable": [], 870 # "IPv6Addresses": [ 871 # { 872 # "Address": "X002:db8:0:2::XX0", 873 # "AddressOrigin": "DHCPv6", 874 # "PrefixLength": 128 875 # }, 876 # { 877 # "Address": “X002:db8:0:2:a94:XXff:fe82:XXXX", 878 # "AddressOrigin": "SLAAC", 879 # "PrefixLength": 64 880 # }, 881 # { 882 # "Address": “Y002:db8:0:2:a94:efff:fe82:5000", 883 # "AddressOrigin": "Static", 884 # "PrefixLength": 56 885 # }, 886 # { 887 # "Address": “Z002:db8:0:2:a94:efff:fe82:5000", 888 # "AddressOrigin": "Static", 889 # "PrefixLength": 56 890 # }, 891 # { 892 # "Address": “Xe80::a94:efff:YYYY:XXXX", 893 # "AddressOrigin": "LinkLocal", 894 # "PrefixLength": 64 895 # }, 896 # { 897 # "Address": “X002:db8:1:2:eff:233:fee:546", 898 # "AddressOrigin": "Static", 899 # "PrefixLength": 56 900 # } 901 # ], 902 # "IPv6DefaultGateway": “XXXX::ab2e:80fe:87df:XXXX”, 903 # "IPv6StaticAddresses": [ 904 # { 905 # "Address": “X002:db8:0:2:a94:efff:fe82:5000", 906 # "PrefixLength": 56 907 # }, 908 # { 909 # "Address": “Y002:db8:0:2:a94:efff:fe82:5000", 910 # "PrefixLength": 56 911 # }, 912 # { 913 # "Address": “Z002:db8:1:2:eff:233:fee:546", 914 # "PrefixLength": 56 915 # } 916 # ], 917 # "IPv6StaticDefaultGateways": [], 918 919 # Find the position of IPv6 address to be modified. 920 @{ipv6_network_configurations}= Get IPv6 Network Configuration 921 FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} 922 IF '${ipv6_network_configuration['Address']}' == '${ipv6}' 923 Append To List ${patch_list} ${ipv6_data} 924 ELSE 925 Append To List ${patch_list} ${empty_dict} 926 END 927 END 928 929 # Modify the IPv6 address only if given IPv6 is found 930 ${ip_found}= Run Keyword And Return Status List Should Contain Value 931 ... ${patch_list} ${ipv6_data} msg=${ipv6} does not exist on BMC 932 Pass Execution If ${ip_found} == ${False} ${ipv6} does not exist on BMC 933 934 ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} 935 936 ${active_channel_config}= Get Active Channel Config 937 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 938 939 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 940 ... body=&{data} valid_status_codes=${valid_status_codes} 941 942 # Note: Network restart takes around 15-18s after patch request processing. 943 Sleep ${NETWORK_TIMEOUT}s 944 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 945 946 # Verify if new IPv6 address is configured on BMC. 947 Verify IPv6 On BMC ${new_ipv6} 948 949 # Verify if old IPv6 address is erased. 950 ${cmd_status}= Run Keyword And Return Status 951 ... Verify IPv6 On BMC ${ipv6} 952 Should Be Equal ${cmd_status} ${False} msg=Old IPv6 address is not deleted. 953 954 Validate IPv6 Network Config On BMC 955 956 957Set SLAAC Configuration State And Verify 958 [Documentation] Set SLAAC configuration state. 959 [Arguments] ${slaac_state} ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] 960 ... ${channel_number}=${CHANNEL_NUMBER} ${is_slaac_verify_state}=${True} 961 962 # Description of argument(s): 963 # slaac_state SLAAC state('True' or 'False'). 964 # valid_status_code Expected valid status codes. 965 # channel_number Channel number 1(eth0) or 2(eth1). 966 # is_slaac_verify_state Flag to check verification is required. 967 968 ${active_channel_config}= Get Active Channel Config 969 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 970 971 ${data}= Set Variable If ${slaac_state} == ${False} ${DISABLE_SLAAC} ${ENABLE_SLAAC} 972 ${resp}= Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 973 ... body=${data} valid_status_codes=${valid_status_codes} 974 IF ${is_slaac_verify_state} 975 Verify SLAAC Property ${slaac_state} ${channel_number} 976 END 977 978 979Verify SLAAC Property 980 [Documentation] Verify SLAAC property. 981 [Arguments] ${slaac_state} ${channel_number}=${CHANNEL_NUMBER} 982 983 # Description of argument(s): 984 # slaac_state SLAAC state('True' or 'False'). 985 # channel_number Channel number 1(eth0) or 2(eth1). 986 987 # Verify SLAAC is set correctly. 988 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 989 ${slaac_verify}= Get From Dictionary ${resp.dict} StatelessAddressAutoConfig 990 991 IF '${slaac_verify['IPv6AutoConfigEnabled']}' != '${slaac_state}' 992 Fail msg=SLAAC not set properly. 993 END 994 995 996Set And Verify DHCPv6 Property 997 [Documentation] Set DHCPv6 property and verify. 998 [Arguments] ${dhcpv6_operating_mode}=${Disabled} ${channel_number}=${CHANNEL_NUMBER} 999 1000 # Description of argument(s): 1001 # dhcpv6_operating_mode Enabled if user wants to enable DHCPv6('Enabled' or 'Disabled'). 1002 # channel_number Channel number 1 or 2. 1003 1004 Set DHCPv6 Property ${dhcpv6_operating_mode} ${channel_number} 1005 Verify DHCPv6 Property ${dhcpv6_operating_mode} ${channel_number} 1006 1007 1008Set DHCPv6 Property 1009 [Documentation] Set DHCPv6 attribute is enables or disabled. 1010 [Arguments] ${dhcpv6_operating_mode}=${Disabled} ${channel_number}=${CHANNEL_NUMBER} 1011 1012 # Description of argument(s): 1013 # dhcpv6_operating_mode Enabled if user wants to enable DHCPv6('Enabled' or 'Disabled'). 1014 # channel_number Channel number 1 or 2. 1015 1016 ${data}= Set Variable If '${dhcpv6_operating_mode}' == 'Disabled' ${DISABLE_DHCPv6} ${ENABLE_DHCPv6} 1017 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 1018 1019 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1020 ... body=${data} valid_status_codes=[${HTTP_OK},${HTTP_NO_CONTENT}] 1021 1022 1023Verify DHCPv6 Property 1024 [Documentation] Verify DHCPv6 settings is enabled or disabled. 1025 [Arguments] ${dhcpv6_operating_mode} ${channel_number}=${CHANNEL_NUMBER} 1026 1027 # Description of Argument(s): 1028 # dhcpv6_operating_mode Enable/ Disable DHCPv6. 1029 # channel_number Channel number 1 or 2. 1030 1031 ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} 1032 1033 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1034 ${dhcpv6_verify}= Get From Dictionary ${resp.dict} DHCPv6 1035 1036 Should Be Equal '${dhcpv6_verify['OperatingMode']}' '${dhcpv6_operating_mode}' 1037 1038 Sleep 30s 1039 1040 @{ipv6_addressorigin_list} ${ipv6_dhcpv6_addr}= 1041 ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${channel_number} 1042 1043 IF "${dhcpv6_operating_mode}" == "Enabled" 1044 @{ipv6_addressorigin_list} ${ipv6_dhcpv6_addr}= 1045 ... Get Address Origin List And Address For Type DHCPv6 ${channel_number} 1046 Should Not Be Empty ${ipv6_dhcpv6_addr} msg=DHCPv6 must be present. 1047 ELSE 1048 Should Not Contain ${ipv6_addressorigin_list} DHCPv6 1049 END 1050 1051 1052 1053Get IPv6 Static Default Gateway 1054 [Documentation] Get IPv6 static default gateway. 1055 1056 ${active_channel_config}= Get Active Channel Config 1057 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']} 1058 1059 @{ipv6_static_defgw_configurations}= Get From Dictionary ${resp.dict} IPv6StaticDefaultGateways 1060 RETURN @{ipv6_static_defgw_configurations} 1061 1062 1063Configure IPv6 Static Default Gateway On BMC 1064 [Documentation] Configure IPv6 static default gateway on BMC. 1065 [Arguments] ${ipv6_gw_addr} ${prefix_length_def} 1066 ... ${valid_status_codes}=${HTTP_OK} 1067 1068 # Description of argument(s): 1069 # ipv6_gw_addr IPv6 Static Default Gateway address to be configured. 1070 # prefix_len_def Prefix length value (Range 1 to 128). 1071 # valid_status_codes Expected return code from patch operation 1072 # (e.g. "200", "204".) 1073 1074 # Prefix Length is passed as None. 1075 IF '${prefix_length_def}' == '${None}' 1076 ${ipv6_gw}= Create Dictionary Address=${ipv6_gw_addr} 1077 ELSE 1078 ${ipv6_gw}= Create Dictionary Address=${ipv6_gw_addr} Prefix Length=${prefix_length_def} 1079 END 1080 1081 ${ipv6_static_def_gw}= Get IPv6 Static Default Gateway 1082 1083 ${num_entries}= Get Length ${ipv6_static_def_gw} 1084 1085 ${patch_list}= Create List 1086 ${empty_dict}= Create Dictionary 1087 1088 FOR ${INDEX} IN RANGE 0 ${num_entries} 1089 Append To List ${patch_list} ${empty_dict} 1090 END 1091 1092 ${valid_status_codes}= Set Variable If '${valid_status_codes}' == '${HTTP_OK}' 1093 ... ${HTTP_OK},${HTTP_NO_CONTENT} 1094 ... ${valid_status_codes} 1095 1096 Append To List ${patch_list} ${ipv6_gw} 1097 ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} 1098 1099 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1100 ... body=${data} valid_status_codes=[${valid_status_codes}] 1101 1102 # Verify the added static default gateway is present in Redfish Get Output. 1103 ${ipv6_staticdef_gateway}= Get IPv6 Static Default Gateway 1104 1105 ${ipv6_static_def_gw_list}= Create List 1106 FOR ${ipv6_staticdef_gateway} IN @{ipv6_staticdef_gateway} 1107 ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address 1108 Append To List ${ipv6_static_def_gw_list} ${value} 1109 END 1110 1111 IF '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' 1112 Should Not Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} 1113 ELSE 1114 Should Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} 1115 END 1116 1117 1118Modify IPv6 Static Default Gateway On BMC 1119 [Documentation] Modify and verify IPv6 address of BMC. 1120 [Arguments] ${ipv6_gw_addr} ${new_static_def_gw} ${prefix_length} 1121 ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED}] 1122 1123 # Description of argument(s): 1124 # ipv6_gw_addr IPv6 static default gateway address to be replaced (e.g. "2001:AABB:CCDD::AAFF"). 1125 # new_static_def_gw New static default gateway address to be configured. 1126 # prefix_length Prefix length value (Range 1 to 128). 1127 # valid_status_codes Expected return code from patch operation 1128 # (e.g. "200", "204"). 1129 1130 ${empty_dict}= Create Dictionary 1131 ${patch_list}= Create List 1132 # Prefix Length is passed as None. 1133 IF '${prefix_length_def}' == '${None}' 1134 ${modified_ipv6_gw_addripv6_data}= Create Dictionary Address=${new_static_def_gw} 1135 ELSE 1136 ${modified_ipv6_gw_addripv6_data}= Create Dictionary Address=${new_static_def_gw} Prefix Length=${prefix_length_def} 1137 END 1138 1139 @{ipv6_static_def_gw_list}= Get IPv6 Static Default Gateway 1140 1141 FOR ${ipv6_static_def_gw} IN @{ipv6_static_def_gw_list} 1142 IF '${ipv6_static_def_gw['Address']}' == '${ipv6_gw_addr}' 1143 Append To List ${patch_list} ${modified_ipv6_gw_addripv6_data} 1144 ELSE 1145 Append To List ${patch_list} ${empty_dict} 1146 END 1147 END 1148 1149 # Modify the IPv6 address only if given IPv6 static default gateway is found. 1150 ${ip_static_def_gw_found}= Run Keyword And Return Status List Should Contain Value 1151 ... ${patch_list} ${modified_ipv6_gw_addripv6_data} msg=${ipv6_gw_addr} does not exist on BMC 1152 Pass Execution If ${ip_static_def_gw_found} == ${False} ${ipv6_gw_addr} does not exist on BMC 1153 1154 ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} 1155 1156 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1157 ... body=&{data} valid_status_codes=${valid_status_codes} 1158 1159 ${ipv6_staticdef_gateway}= Get IPv6 Static Default Gateway 1160 1161 ${ipv6_static_def_gw_list}= Create List 1162 FOR ${ipv6_staticdef_gateway} IN @{ipv6_staticdef_gateway} 1163 ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address 1164 Append To List ${ipv6_static_def_gw_list} ${value} 1165 END 1166 1167 Should Contain ${ipv6_static_def_gw_list} ${new_static_def_gw} 1168 # Verify if old static default gateway address is erased. 1169 Should Not Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} 1170 1171 1172Delete IPv6 Static Default Gateway 1173 [Documentation] Delete IPv6 static default gateway on BMC. 1174 [Arguments] ${ipv6_gw_addr} 1175 ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] 1176 1177 # Description of argument(s): 1178 # ipv6_gw_addr IPv6 Static Default Gateway address to be deleted. 1179 # valid_status_codes Expected return code from patch operation 1180 # (e.g. "200"). 1181 1182 ${patch_list}= Create List 1183 ${empty_dict}= Create Dictionary 1184 1185 ${ipv6_static_def_gw_list}= Create List 1186 @{ipv6_static_defgw_configurations}= Get IPv6 Static Default Gateway 1187 1188 FOR ${ipv6_staticdef_gateway} IN @{ipv6_static_defgw_configurations} 1189 ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address 1190 Append To List ${ipv6_static_def_gw_list} ${value} 1191 END 1192 1193 ${defgw_found}= Run Keyword And Return Status List Should Contain Value 1194 ... ${ipv6_static_def_gw_list} ${ipv6_gw_addr} msg=${ipv6_gw_addr} does not exist on BMC 1195 Skip If ${defgw_found} == ${False} ${ipv6_gw_addr} does not exist on BMC 1196 1197 FOR ${ipv6_static_def_gw} IN @{ipv6_static_defgw_configurations} 1198 IF '${ipv6_static_def_gw['Address']}' == '${ipv6_gw_addr}' 1199 Append To List ${patch_list} ${null} 1200 ELSE 1201 Append To List ${patch_list} ${empty_dict} 1202 END 1203 END 1204 1205 # Run patch command only if given IP is found on BMC. 1206 ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} 1207 1208 Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 1209 ... valid_status_codes=${valid_status_codes} 1210 1211 ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} 1212 1213 @{ipv6_static_defgw_configurations}= Get IPv6 Static Default Gateway 1214 Should Not Contain Match ${ipv6_static_defgw_configurations} ${ipv6_gw_addr} 1215 ... msg=IPv6 Static default gateway does not exist. 1216 1217 1218Check Coexistence Of Linklocalv6 And Static IPv6 1219 [Documentation] Verify both linklocalv6 and static IPv6 exist. 1220 1221 # Verify the address origin contains static and linklocal. 1222 @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal 1223 1224 Should Match Regexp ${ipv6_linklocal_addr} ${linklocal_addr_format} 1225 Should Contain ${ipv6_addressorigin_list} Static 1226 1227 1228Check Coexistence Of Static IPv6 And SLAAC 1229 [Documentation] Verify both static IPv6 and SLAAC coexist. 1230 1231 # Verify the address origin contains static and slaac. 1232 @{ipv6_addressorigin_list} ${ipv6_static_addr}= 1233 ... Get Address Origin List And Address For Type Static 1234 1235 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= 1236 ... Get Address Origin List And Address For Type SLAAC 1237 1238 1239Check Coexistence Of Link Local And SLAAC 1240 [Documentation] Verify both link local and SLAAC coexist. 1241 1242 # Verify the address origin contains SLAAC and link local. 1243 @{ipv6_addressorigin_list} ${ipv6_link_local_addr}= 1244 ... Get Address Origin List And Address For Type LinkLocal 1245 1246 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= 1247 ... Get Address Origin List And Address For Type SLAAC 1248 1249 Should Match Regexp ${ipv6_link_local_addr} ${linklocal_addr_format} 1250 1251 1252Check Coexistence Of Link Local And DHCPv6 1253 [Documentation] Verify both link local and dhcpv6 coexist. 1254 1255 # Verify the address origin contains dhcpv6 and link local. 1256 @{ipv6_address_origin_list} ${ipv6_link_local_addr}= 1257 ... Get Address Origin List And Address For Type LinkLocal 1258 1259 @{ipv6_address_origin_list} ${ipv6_dhcpv6_addr}= 1260 ... Get Address Origin List And Address For Type DHCPv6 1261 1262 Should Match Regexp ${ipv6_link_local_addr} ${linklocal_addr_format} 1263 1264 1265Check If Linklocal Address Is In Correct Format 1266 [Documentation] Linklocal address has network part fe80 and host part EUI64. 1267 1268 # Fetch the linklocal address. 1269 @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal 1270 1271 # Follow EUI64 from MAC. 1272 ${system_mac}= Get BMC MAC Address 1273 ${split_octets}= Split String ${system_mac} : 1274 ${first_octet}= Evaluate int('${split_octets[0]}', 16) 1275 ${flipped_hex}= Evaluate format(${first_octet} ^ 2, '02x') 1276 ${grp1}= Evaluate re.sub(r'^0+', '', '${flipped_hex}${split_octets[1]}') modules=re 1277 ${grp2}= Evaluate re.sub(r'^0+', '', '${split_octets[2]}ff') modules=re 1278 ${grp3}= Evaluate re.sub(r'^0+', '', '${split_octets[4]}${split_octets[5]}') modules=re 1279 ${linklocal}= Set Variable fe80::${grp1}:${grp2}:fe${split_octets[3]}:${grp3} 1280 1281 # Verify the linklocal obtained is the same as on the machine. 1282 Should Be Equal ${linklocal} ${ipv6_linklocal_addr} 1283 1284 1285Check BMC Gets SLAAC Address 1286 [Documentation] Check BMC gets slaac address. 1287 1288 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC 1289 1290 1291Get The Initial DHCPv6 Setting On Each Interface 1292 [Documentation] Get the initial DHCPv6 setting of each interface. 1293 [Arguments] ${channel_number} 1294 1295 # Description of the argument(s): 1296 # channel_number Channel number 1 or 2. 1297 1298 ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} 1299 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1300 ${initial_dhcpv6_iface}= Get From Dictionary ${resp.dict} DHCPv6 1301 IF ${channel_number}==${1} 1302 Set Test Variable ${dhcpv6_channel_1} ${initial_dhcpv6_iface['OperatingMode']} 1303 ELSE 1304 Set Test Variable ${dhcpv6_channel_2} ${initial_dhcpv6_iface['OperatingMode']} 1305 END 1306 1307 1308Get The Initial DHCPv6 Settings 1309 [Documentation] Get the initial DHCPv6 settings of both the interfaces. 1310 1311 Get The Initial DHCPv6 Setting On Each Interface ${1} 1312 Get The Initial DHCPv6 Setting On Each Interface ${2} 1313 1314 1315Get The Initial SLAAC Settings 1316 [Documentation] Get the initial SLAAC settings of both the interfaces. 1317 1318 Get The Initial SLAAC Setting On Each Interface ${1} 1319 Get The Initial SLAAC Setting On Each Interface ${2} 1320 1321 1322Get The Initial SLAAC Setting On Each Interface 1323 [Documentation] Get the initial SLAAC setting of the interface. 1324 [Arguments] ${channel_number} 1325 1326 # Description of the argument(s): 1327 # channel_number Channel number 1 or 2. 1328 1329 ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} 1330 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} 1331 ${initial_slaac_iface}= Get From Dictionary ${resp.dict} StatelessAddressAutoConfig 1332 IF ${channel_number}==${1} 1333 Set Test Variable ${slaac_channel_1} ${initial_slaac_iface['IPv6AutoConfigEnabled']} 1334 ELSE 1335 Set Test Variable ${slaac_channel_2} ${initial_slaac_iface['IPv6AutoConfigEnabled']} 1336 END 1337 1338 1339Get Address Origin List And IPv4 or IPv6 Address 1340 [Documentation] Get address origin list and address for type. 1341 [Arguments] ${ip_address_type} ${channel_number}=${CHANNEL_NUMBER} 1342 1343 # Description of the argument(s): 1344 # ip_address_type Type of IPv4 or IPv6 address to be checked. 1345 # channel_number Channel number 1(eth0) or 2(eth1). 1346 1347 ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']} 1348 @{ip_addresses}= Get From Dictionary ${resp.dict} ${ip_address_type} 1349 1350 ${ip_addressorigin_list}= Create List 1351 ${ip_addr_list}= Create List 1352 FOR ${ip_address} IN @{ip_addresses} 1353 ${ip_addressorigin}= Get From Dictionary ${ip_address} AddressOrigin 1354 Append To List ${ip_addressorigin_list} ${ip_addressorigin} 1355 Append To List ${ip_addr_list} ${ip_address['Address']} 1356 END 1357 RETURN ${ip_addressorigin_list} ${ip_addr_list} 1358 1359 1360Verify All The Addresses Are Intact 1361 [Documentation] Verify all the addresses and address origins remain intact. 1362 [Arguments] ${channel_number}=${CHANNEL_NUMBER} 1363 ... ${initial_ipv4_addressorigin_list}=${initial_ipv4_addressorigin_list} 1364 ... ${initial_ipv4_addr_list}=${initial_ipv4_addr_list} 1365 1366 # Description of argument(s): 1367 # channel_number Channel number 1(eth0) or 2(eth1). 1368 # initial_ipv4_addressorigin_list Initial IPv4 address origin list. 1369 # initial_ipv4_addr_list Initial IPv4 address list. 1370 1371 # Verify that it will not impact the IPv4 configuration. 1372 Sleep ${NETWORK_TIMEOUT} 1373 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 1374 1375 # IPv6 Linklocal address must be present. 1376 @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= 1377 ... Get Address Origin List And Address For Type LinkLocal ${channel_number} 1378 1379 # IPv4 addresses must remain intact. 1380 ${ipv4_addressorigin_list} ${ipv4_addr_list}= 1381 ... Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses ${channel_number} 1382 1383 Should be Equal ${initial_ipv4_addressorigin_list} ${ipv4_addressorigin_list} 1384 Should be Equal ${initial_ipv4_addr_list} ${ipv4_addr_list} 1385 1386 1387Get Interface ID Of IPv6 1388 [Documentation] Get interface id of IPv6 address. 1389 [Arguments] ${ipv6_address} 1390 1391 # Description of the argument(s): 1392 # ${ipv6_address} IPv6 Address to extract the last 4 hextets. 1393 1394 # Last 64 bits of SLAAC and Linklocal must be the same. 1395 # Sample IPv6 network configurations. 1396 #"IPv6AddressPolicyTable": [], 1397 # "IPv6Addresses": [ 1398 # { 1399 # "Address": "fe80::xxxx:xxxx:xxxx:xxxx", 1400 # "AddressOrigin": "LinkLocal", 1401 # "AddressState": null, 1402 # "PrefixLength": xx 1403 # } 1404 # ], 1405 # { 1406 # "Address": "2002:xxxx:xxxx:xxxx:xxxx", 1407 # "AddressOrigin": "SLAAC", 1408 # "PrefixLength": 64 1409 # } 1410 # ], 1411 1412 ${split_ip_address}= Split String ${ipv6_address} : 1413 ${missing_ip}= Evaluate 8 - len(${split_ip_address}) + 1 1414 ${expanded_ip}= Create List 1415 1416 FOR ${hextet} IN @{split_ip_address} 1417 IF '${hextet}' == '' 1418 FOR ${i} IN RANGE ${missing_ip} 1419 Append To List ${expanded_ip} 0000 1420 END 1421 ELSE 1422 Append To List ${expanded_ip} ${hextet} 1423 END 1424 END 1425 ${interface_id}= Evaluate ':'.join(${expanded_ip}[-4:]) 1426 RETURN ${interface_id} 1427 1428 1429Set And Verify SLAAC Property On Both Interfaces 1430 [Documentation] Set and verify SLAAC property on both interfaces. 1431 [Arguments] ${slaac_value_1} ${slaac_value_2} 1432 1433 # Description of the argument(s): 1434 # slaac_value_1 SLAAC value for channel 1. 1435 # slaac_value_2 SLAAC value for channel 2. 1436 1437 Set SLAAC Configuration State And Verify ${slaac_value_1} [${HTTP_OK}] ${1} 1438 Set SLAAC Configuration State And Verify ${slaac_value_2} [${HTTP_OK}] ${2} 1439 1440 Sleep 30s 1441 1442 # Check SLAAC Settings for eth0. 1443 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= 1444 ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${1} 1445 IF "${slaac_value_1}" == "${True}" 1446 Should Not Be Empty ${ipv6_slaac_addr} SLAAC 1447 ELSE 1448 Should Not Contain ${ipv6_addressorigin_list} SLAAC 1449 END 1450 1451 # Check SLAAC Settings for eth1. 1452 @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= 1453 ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${2} 1454 IF "${slaac_value_2}" == "${True}" 1455 Should Not Be Empty ${ipv6_slaac_addr} SLAAC 1456 ELSE 1457 Should Not Contain ${ipv6_addressorigin_list} SLAAC 1458 END 1459 1460 Verify All The Addresses Are Intact ${1} 1461 Verify All The Addresses Are Intact ${2} 1462 ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list} 1463 1464 1465Set And Verify DHCPv6 Property On Both Interfaces 1466 [Documentation] Set and verify DHCPv6 property on both interfaces. 1467 [Arguments] ${dhcpv6_value_1} ${dhcpv6_value_2} 1468 1469 # Description of the argument(s): 1470 # dhcpv6_value_1 DHCPv6 value for channel 1. 1471 # dhcpv6_value_2 DHCPv6 value for channel 2. 1472 1473 Set And Verify DHCPv6 Property ${dhcpv6_value_1} ${1} 1474 Set And Verify DHCPv6 Property ${dhcpv6_value_2} ${2} 1475 1476 Verify All The Addresses Are Intact ${1} 1477 Verify All The Addresses Are Intact ${2} 1478 ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list} 1479 1480 1481Verify IPv6 Addresses Coexist 1482 [Documentation] Verify IPv6 address type coexist. 1483 [Arguments] ${ipv6_address_type1} ${ipv6_address_type2} 1484 1485 # Description of the argument(s): 1486 # ipv6_address_type1 IPv6 address type. 1487 # ipv6_address_type2 IPv6 address type. 1488 # Valid IPv6 address type (Static, DHCPv6, SLAAC). 1489 1490 IF '${ipv6_address_type1}' == 'Static' and '${ipv6_address_type2}' == 'DHCPv6' 1491 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 1492 Set And Verify DHCPv6 Property Enabled 1493 ELSE IF '${ipv6_address_type1}' == 'DHCPv6' and '${ipv6_address_type2}' == 'SLAAC' 1494 Set And Verify DHCPv6 Property Enabled 1495 Set SLAAC Configuration State And Verify ${True} 1496 ELSE IF '${ipv6_address_type1}' == 'SLAAC' and '${ipv6_address_type2}' == 'Static' 1497 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 1498 Set SLAAC Configuration State And Verify ${True} 1499 ELSE IF '${ipv6_address_type1}' == 'Static' and '${ipv6_address_type2}' == 'Static' 1500 Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} 1501 Configure IPv6 Address On BMC ${test_ipv6_addr1} ${test_prefix_length} 1502 END 1503 1504 Sleep ${NETWORK_TIMEOUT}s 1505 1506 # Verify coexistence. 1507 Verify The Coexistence Of The Address Type ${ipv6_address_type1} ${ipv6_address_type2} 1508 1509 IF '${ipv6_address_type1}' == 'Static' or '${ipv6_address_type2}' == 'Static' 1510 Delete IPv6 Address ${test_ipv6_addr} 1511 END 1512 IF '${ipv6_address_type1}' == 'Static' and '${ipv6_address_type2}' == 'Static' 1513 Delete IPv6 Address ${test_ipv6_addr1} 1514 END 1515 1516 Set And Verify DHCPv6 Property Disabled 1517 Set SLAAC Configuration State And Verify ${False} 1518