1*** Settings ***
2Documentation     Energy scale power capping tests.
3
4
5# Acronyms
6#  PL     Power Limit
7#  OCC    On Chip Controller
8
9
10Resource          ../../lib/energy_scale_utils.robot
11Resource          ../../lib/rest_client.robot
12Resource          ../../lib/openbmc_ffdc.robot
13Resource          ../../lib/boot_utils.robot
14Resource          ../../lib/ipmi_client.robot
15Resource          ../../syslib/utils_os.robot
16
17
18Suite Setup      Suite Setup Execution
19Test Teardown    Test Teardown Execution
20
21
22
23*** Variables ****
24
25${max_power}            3050
26${near_max_power_50}    3000
27${near_max_power_100}   2950
28
29
30
31*** Test Cases ***
32
33
34Escale System On And PL Enabled
35    [Documentation]  Change active power limit with system power on and
36    ...  Power limit active.
37    [Tags]  Escale_System_On_And_PL_Enabled
38
39    Set DCMI Power Limit And Verify  ${max_power}
40
41    Redfish Power On  stack_mode=skip
42
43    Tool Exist  opal-prd
44    OCC Tool Upload Setup
45
46    # Get OCC data from OS.
47    ${cmd}=  Set Variable  /tmp/occtoolp9 -p | grep -e State: -e Sensor:
48    ${output}  ${stderr}  ${rc}=  OS Execute Command  ${cmd}
49
50    # Check for expected responses.
51    Should Contain  ${output}  ACTIVE
52    Should Contain  ${output}  Sensor: TEMP
53    Should Contain  ${output}  Sensor: FREQ
54    Should Contain  ${output}  Sensor: POWR
55
56    # Disable OCC.
57    ${output}  ${stderr}  ${rc}=  OS Execute Command  opal-prd occ disable
58    # With OCC disabled we should have OBSERVATION in output.
59    ${output}  ${stderr}  ${rc}=  OS Execute Command  ${cmd}
60    Should Contain  ${output}  OBSERVATION
61
62    # Re-enable OCC for remaining tests.
63    ${output}  ${stderr}  ${rc}=  OS Execute Command  opal-prd occ enable
64    ${output}  ${stderr}  ${rc}=  OS Execute Command  ${cmd}
65    Should Contain  ${output}  ACTIVE
66
67    ${power}=  Get DCMI Power Limit
68    Should Be True  ${power} == ${max_power}
69    ...  msg=DCMI power limit should be ${max_power}.
70
71    Activate DCMI Power And Verify
72
73    Set DCMI Power Limit And Verify  ${near_max_power_50}
74
75
76Escale System On And PL Disabled
77    [Documentation]  Change active power limit with system power on and
78    ...  deactivate power limit prior to change.
79    [Tags]  Escale_System_On_And_PL_Disabled
80
81    ${power_setting}=  Set Variable  ${near_max_power_100}
82
83    Redfish Power On  stack_mode=skip
84
85    Set DCMI Power Limit And Verify  ${power_setting}
86
87    # Deactivate and check limit
88    Deactivate DCMI Power And Verify
89
90    ${cmd}=  Catenate  dcmi power set_limit limit ${near_max_power_50}
91    Run External IPMI Standard Command  ${cmd}
92    ${power}=  Get DCMI Power Limit
93
94    Should Be True  ${power} == ${near_max_power_50}
95    ...  msg=Could not set power limit when power limiting deactivated.
96
97
98Escale Check Settings System On Then Off
99    [Documentation]  Set power limit and activate power limit before
100    ...  BMC state is power on.
101    [Tags]  Escale_Check_Settings_System_On_Then_Off
102
103    ${power_setting}=  Set Variable  ${near_max_power_100}
104
105    Redfish Power On  stack_mode=skip
106
107    Set DCMI Power Limit And Verify  ${power_setting}
108    Deactivate DCMI Power And Verify
109
110    ${power}=  Get DCMI Power Limit
111    Should Be True  ${power} == ${power_setting}
112    ...  msg=dcmi power limit not set to ${power_setting} as expected.
113
114    Smart Power Off
115
116    Activate DCMI Power And Verify
117
118    Redfish Power On
119
120    ${power}=  Get DCMI Power Limit
121    Should Be True  ${power} == ${power_setting}
122    ...  msg=Power limit setting of watts not retained at Runtime.
123
124    Deactivate DCMI Power And Verify
125
126
127Escale Check Settings System Off Then On
128    [Documentation]  Set and activate power limit with system power off.
129    [Tags]  Escale_Check_Settings_System_Off_Then_On
130
131    ${power_setting}=  Set Variable  ${near_max_power_50}
132
133    Set DCMI Power Limit And Verify  ${power_setting}
134    Deactivate DCMI Power and Verify
135
136    Smart Power Off
137
138    # Check deactivated and the power limit.
139    Fail If DCMI Power Is Not Deactivated
140    ${power}=  Get DCMI Power Limit
141    Should Be True  ${power} == ${power_setting}
142    ...  msg=DCMI power not set at ${power_setting} as expected
143
144    Activate DCMI Power And Verify
145    Set DCMI Power Limit And Verify  ${power_setting}
146
147    Redfish Power On
148
149    Fail If DCMI Power Is Not Activated
150
151    ${power}=  Get DCMI Power Limit
152    Should Be True  ${power} == ${power_setting}
153    ...  msg=Power limit setting not retained at Runtime.
154
155
156Escale Change Limit At Runtime
157    [Documentation]  Change power limit at runtime.
158    [Tags]  Escale_Change_Limit_At_Runtime
159
160    ${power_setting}=  Set Variable  ${near_max_power_100}
161
162    Set DCMI Power Limit And Verify  ${near_max_power_50}
163
164    Smart Power Off
165
166    Redfish Power On  stack_mode=skip
167
168    Set DCMI Power Limit And Verify  ${power_setting}
169
170    # Check that DCMI power limit setting = ${power_setting}.
171    ${power}=  Get DCMI Power Limit
172    Should Be True  ${power} == ${power_setting}
173    ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
174
175    Set DCMI Power Limit And Verify  ${max_power}
176
177
178Escale Disable And Enable At Runtime
179    [Documentation]  Disable/enable power limit at runtime.
180    [Tags]  Escale_Disable_And_Enable_At_Runtime
181
182    ${power_setting}=  Set Variable  ${near_max_power_50}
183
184    Smart Power Off
185
186    Set DCMI Power Limit And Verify  ${power_setting}
187    Activate DCMI Power And Verify
188
189    # Power on the system.
190    Redfish Power On
191
192    # Check that DCMI power limit setting = ${power_setting}.
193    ${power}=  Get DCMI Power Limit
194    Should Be True  ${power} == ${power_setting}
195    ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
196
197    Deactivate DCMI Power And Verify
198
199    Activate DCMI Power And Verify
200
201    ${power}=  Get DCMI Power Limit
202    Should Be True  ${power} == ${power_setting}
203    ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
204
205
206*** Keywords ***
207
208
209Suite Setup Execution
210    [Documentation]  Do test setup initialization.
211    #  Power Off if system if not already off.
212    #  Save initial settings.
213    #  Deactivate power and set limit.
214
215    Smart Power Off
216
217    # Save the deactivation/activation setting.
218    ${cmd}=  Catenate  dcmi power get_limit | grep State
219    ${resp}=  Run External IPMI Standard Command  ${cmd}
220    # Response is either "Power Limit Active" or "No Active Power Limit".
221    ${initial_deactivation}=  Get Count  ${resp}  No
222    # If deactivated: initial_deactivation = 1, 0 otherwise.
223    Set Suite Variable  ${initial_deactivation}  children=true
224
225    # Save the power limit setting.
226    ${initial_power_setting}=  Get DCMI Power Limit
227    Set Suite Variable  ${initial_power_setting}  children=true
228
229    # Set power limiting deactivated.
230    Deactivate DCMI Power And Verify
231
232    # Set initial power setting value.
233    Set DCMI Power Limit And Verify  ${max_power}
234
235
236Test Teardown Execution
237    [Documentation]  Do the post test teardown.
238    # FFDC on test case fail.
239    # Power off the OS and wait for power off state.
240    # Return the system's initial deactivation/activation setting.
241    # Return the system's initial power limit setting.
242
243    FFDC On Test Case Fail
244
245    Smart Power Off
246
247    Run Keyword If  '${initial_power_setting}' != '${0}'
248    ...  Set DCMI Power Limit And Verify  ${initial_power_setting}
249
250    Run Keyword If  '${initial_deactivation}' == '${1}'
251    ...  Deactivate DCMI Power And Verify  ELSE  Activate DCMI Power And Verify
252