1*** Settings ***
2Documentation     Energy scale base tests.
3
4
5# Test Parameters:
6# OPENBMC_HOST        The BMC host name or IP address.
7
8
9Resource          ../../lib/energy_scale_utils.robot
10Resource          ../../lib/openbmc_ffdc.robot
11Resource          ../../lib/utils.robot
12Resource          ../../lib/logging_utils.robot
13Library           ../../lib/logging_utils.py
14
15
16Suite Setup      Suite Setup Execution
17Test Teardown    Test Teardown Execution
18
19
20*** Variables ****
21
22${over_max_power}       4001
23${max_power}            3050
24${mid_power}            1950
25${min_power}            600
26${below_min_power}      499
27${zero_power}           0
28#  The power limits are documented in
29#  open-power/witherspoon-xml/master/witherspoon.xml.
30
31
32*** Test Cases ***
33
34
35Escale Base Test Inactive Monitoring
36    [Documentation]  Run base power tests with DCMI power monitoring off.
37    [Tags]  Escale_Base_Test_Deactive_Monitoring
38
39    Deactivate DCMI Power And Verify
40    Verify Power Limits
41
42
43Escale Base Test Active Monitoring
44    [Documentation]  Run base power tests with DCMI power monitoring on.
45    [Tags]  Escale_Base_Test_Active_Monitoring
46
47    Activate DCMI Power And Verify
48    Verify Power Limits
49
50
51Escale Power Setting Via REST And Verify
52    [Documentation]  Set power via REST and check using IPMI.
53    [Tags]  Escale_Power_Setting_Via_REST_And_Verify
54
55    # A convenient power level bewtwwn maximum and minimum.
56    ${test_power}=  Set Variable  1700
57
58    # Set the power limit via REST.
59    Set DCMI Power Limit Via REST  ${test_power}
60
61    # Read the power limit using IPMI.
62    ${power_limit}=  Get DCMI Power Limit
63    Should Be True  ${power_limit} == ${test_power}
64    ...  msg=Reading Power limit with IPMI failed after setting it with REST.
65
66
67Escale Power Setting Via IPMI And Verify
68    [Documentation]  Set power via IPMI then check via REST.
69    [Tags]  Escale_Power_Setting_Via_IPMI_And_Verify
70
71    # A convenient power level bewtwwn maximum and minimum.
72    ${test_power}=  Set Variable  2200
73
74    # Set DCMI Power via IPMI.
75    Set DCMI Power Limit And Verify  ${test_power}
76
77    # Read the limit via REST.
78    ${power_limit}=  Get DCMI Power Limit Via REST
79    Should Be True  ${power_limit} == ${test_power}
80    ...  msg=Reading power limit with REST failed after setting it with IPMI.
81
82
83Escale Activation Test Via REST
84    [Documentation]  Activate power monitoring via REST then check via IPMI.
85    [Tags]  Escale_Activation_Test_Via_REST
86
87    Activate DCMI Power Via REST
88    # Confirm activation state using IPMI.
89    Fail If DCMI Power Is Not Activated
90
91
92Escale Deactivation Test Via REST
93    [Documentation]  Deactivate power monitoring via REST and check via IPMI.
94    [Tags]  Escale_Deactivation_Test_Via_REST
95
96    Deactivate DCMI Power Via REST
97    # Confirm activation state using IPMI.
98    Fail If DCMI Power Is Not Deactivated
99
100
101*** Keywords ***
102
103
104Verify Power Limits
105    [Documentation]  Set power levels and verify limits.
106
107    Set DCMI Power Limit And Verify  ${mid_power}
108    Test Power Limit  ${min_power}  ${below_min_power}
109    Test Power Limit  ${min_power}  ${zero_power}
110    Test Power Limit  ${max_power}  ${over_max_power}
111
112    ${power_limit}=  Get DCMI Power Limit
113    Should Be True  ${power_limit} == ${max_power}
114    ...  msg=Power at ${power_limit}. Power should be at ${max_power}.
115
116
117Test Power Limit
118    [Documentation]  Set power and check limit.
119    [Arguments]  ${good_power}  ${outside_bounds_power}
120
121    # Description of argument(s):
122    # good_power              A valid power setting, usually at a limit.
123    # outside_bounds_power    A power level that is beyond the limit.
124
125    Set DCMI Power Limit And Verify  ${good_power}
126
127    # Attempt set power limit out of range.
128    ${int_power_limit}=  Convert To Integer  ${outside_bounds_power}
129    ${data}=  Create Dictionary  data=${int_power_limit}
130    Write Attribute   ${CONTROL_HOST_URI}power_cap  PowerCap  data=${data}
131
132
133Suite Setup Execution
134    [Documentation]  Do test setup initialization.
135
136    Redfish.Login
137
138    # Save the deactivation/activation setting.
139    ${cmd}=  Catenate  dcmi power get_limit | grep State
140    ${resp}=  Run External IPMI Standard Command  ${cmd}
141    # Response is either "Power Limit Active" or "No Active Power Limit".
142    ${initial_deactivation}=  Get Count  ${resp}  No
143    # If deactivated: initial_deactivation = 1, 0 otherwise.
144    Set Suite Variable  ${initial_deactivation}  children=true
145
146    # Save the power limit setting.
147    ${initial_power_setting}=  Get DCMI Power Limit
148    Set Suite Variable  ${initial_power_setting}  children=true
149
150    Delete All Error Logs
151
152
153Test Teardown Execution
154    [Documentation]  Do the post test teardown.
155
156    FFDC On Test Case Fail
157
158    # Restore the system's initial power limit setting.
159    Run Keyword If  '${initial_power_setting}' != '${0}'
160    ...  Set DCMI Power Limit And Verify  ${initial_power_setting}
161
162    # Restore the system's initial deactivation/activation setting.
163    Run Keyword If  '${initial_deactivation}' == '${1}'
164    ...  Deactivate DCMI Power And Verify  ELSE  Activate DCMI Power And Verify
165
166    # Clean up any error logs before exiting.
167    Delete All Error Logs
168
169    Redfish.Logout
170